Single coveredoverlapped splice
51464 EasySplice WinderLine
Extremely thin 50 µm single-sided tape
with a splitting strip for easy prepara-
tion of butt splices on jumbo rolls and
improved run-ability at coaters, calen-
ders and printers.
Also available in 80 µm for increased
resistance against web tension –
51465 EasySplice WinderLine.
4447 Preparation of butt splices without
a liner. Very high tensile strength for
splicing heavy webs.
51913 Very thin double-sided tape for
preparation of thin overlapped splices
with excellent shear resistance for high
web tension and secure run-ability in
further processes.
51444 Extremely thin 50 µm single-
sided cover tape for sealing permanent
splices against bleeding of adhesive to
the next paper layer and strengthening
the splice.
Also available in 80 µm for heavier paper
grades and higher web tension – 51445.
Covered Butt splice
51455 Very thin single-
sided tape with a slit
liner for excellent prin-
ting quality.
54210 Oval shaped die cut with a
liner for excellent printing quality and
easy application.
As a globally leading supplier of adhesive
tapes tesa offers a wide assortment of adhesive soluti-
ons for paper production.
The ability to understand our customers’ processes and their require-
ments and to provide specific solutions is tesa’s focus – and our
customers’ benefit. tesa Solutions are used by leading paper producers
and have proven their high quality level in daily operations.
Re-reeler
Permanent Splice4441 Very good adhe-
sion on all paper gra-
des for secure closing
of jumbo rolls. Features a very high
shear resistance and high stretching
properties making it suitable for
changing environmental conditions.
4445 Very strong single-sided tape
with excellent tack, high tensile
strength and good shear resistance for
closing jumbo rolls of heavy paper and
demanding surfaces.
51446 Good adhesion values on coa-
ted and uncoated papers for closing
jumbo rolls in uncritical conditions.
End tabbing
Hole Patching51150 EasySplice
FastLine The world lea-
ding straight line flying
splice tape at offline coaters for higher
splice security, faster splice preparation
and higher splicing speed.
51157 EasySplice FastLine Heat
The EasySplice solution for high drying
temperatures and long residence times
in the dryer.
51152 EasySplice CoaterLine
The EasySplice solution for small offline
coaters with lower splicing speeds.
Flying Splice – EasySplice Products
Offline Coater
2
31
4
tesa – always a fitting solution
1
2
3
1
5
4445 Single sided tape
with a thick backing for
easy tearing of paper
along the edge of the tape and prepa-
ring stable kites.
51914 Double sided
tape with very high tack
properties for high splice
security. Alternatively 51917 for critical
adherence conditions.
54287 Butterfly shaped
die cut with liner for
fixing the top layer of
the new paper roll.
54216 Trapezoidal die
cut with liner for fixing
the top layer of the new
paper roll with sawtooth profiles.
Web Feeding
51170 EasySplice Calen-
derLine The straight line
flying splice solution for
reducing waste paper, avoiding label resi-
dues, storable reels and splicing with
closed nips.
54287 Butterfly shaped die
cut with liner for fixing the top
layer of the new paper roll.
Flying Splice
4445 Very high tensile
strength for secure
catching of expiring web
after cutting.
Roll Catching
Offline Calender
51913 Very shear resistant
double sided tape for
traditional flying splices at
offline calenders. Also suitable for zero-
speed splices. Alternatively, 51914
as a high tack solution for de-
manding paper surfaces.
Flying Splice – Traditional Splice Patterns 5
6
7
4
6
7
1
®
Magenta-Linie =
verkürzte Seite
51464 EasySplice Winder-
Line Extremely thin 50 µm
single-sided tape with a
splitting strip for easy preparation of high
quality jumbo-to-jumbo butt splices and
preparation of splices on wide customer
rolls for less damage to printing blankets
and highest printing quality for printers.
Also available in 80 µm for splicing heavy
webs and high web tension –
51465 EasySplice WinderLine
51454 – Slit liner Same as 51464 but
without splitting strip as positioning aid for
preparing very thin butt splices on custo-
mer rolls. Also available in 80 µm – 51455.
4447 Preparation of butt splices without a
liner. Very high tensile strength for splicing
heavy webs.
Permanent Splice
51913 Excellent adhesion
properties to ensure a secure
fixing of the web to the core.
Alternatively 51917 with very high tack for
rough paper surfaces and cores.
51916 – Transfer tape Transfer tape with
very good adhesion values and excellent
tack to provide a secure fixing of the web
to the core.
51446 Single-sided tape with good tack
for secure fixing of web to core.
51190 EasySplice Core Starting
Special tear-away backing ensures a relia-
ble opening without adhesive residues on
core or web.
Core Starting
Slit Winder
51913 Very thin double-
sided tape for preparation of
thin overlapped splices.
Features an excellent shear resistance for
high web tension and preventing web
breaks when printing.
51444 Extremely thin 50 µm single-sided
50 µm cover tape for sealing permanent
splices against bleeding of adhesive to the
next paper layer and strengthening the
splice for avoiding web breaks at printers.
Also available in 80 µm for heavier paper
grades and higher web tension – 51445.
51913 Very shear resistant
double-sided tape for zero-
speed splices at sheeters.
Alternatively a high tack solution for
demanding paper surfaces – 51914.
4441 Very good adhesion
on all paper grades for
secure closing of customer
rolls. Features a very high shear resistance
and high stretching properties making it
suitable for changing environmental
conditions.
4445 Very strong single-sided tape with
excellent tack, high tensile strength and
good shear resistance for closing rolls of
heavy paper, demanding surfaces and
difficult storage conditions.
51446 Good adhesion values on coated
and uncoated papers for closing customer
rolls in uncritical conditions.
51916 – Transfer tape Transfer tape with
very good adhesion values and excellent
tack for secure roll closing.
End Tabbing
8
10
9
Static Splice11
8
8
9
10
Sheeter
11
Magenta-Linie =
verkürzte Seite
®
Paper
Paper
Paper
Paper
++
++
++
++
75 N / 25 mm
75 N / 25 mm
75 N / 25 mm
75 N / 25 mm
tesa 51150
tesa 51157
tesa 51152
tesa 51170
Material
blue
blue
blue
blue
Colour
110 µm
110 µm
110 µm
100 µm
Thickness
Product
Adhesion on paper
TensileStrength
6 %
6 %
6 %
6 %
Elongation at break
+
++
+
++
Shear Resistance
+
++
+
++
HeatResistance
++
++
++
+
Tack
EasySplice Products for Flying Splices
Paper
Paper
Transfer
Paper
Paper
++++
+++
+
++++
+o
tesa 51913
tesa 51914
tesa 51916
tesa 51917
tesa 51190
Material
blue colourless
bluecolourless
bluecolourless
bluecolourless
white
Colour
65 µm
85 µm
50 µm
115 µm
120 µm
Thickness
Product
Adhesion on paperCovered Side /
Open Side
++
+
++
+
+
Shear Resistance
++
+
+
+
+
HeatResistance
+
++
+
++
+
Tack
Double-sided tapes
Paper
Paper
Paper
Paper
+
++
+
+
196 N / 25 mm
200 N / 25 mm
100 N / 25 mm
150 N / 25 mm
tesa 4441
tesa 4445
tesa 4447
tesa 51446
Material
light bluewhite
light blue
blue
light blue
Colour
140 µm
190 µm
90 µm
100 µm
ThicknessProduct
Adhesionon paper
TensileStrength
11,75 %
7,5 %
10 %
2,5 %
Elongation at break
+
++
++
+
Shear Resistance
++
++
o
+
Tack
Single-sided tapes without liner
Paper
Paper
Paper
Paper
Paper
Paper
+
++
+
++
+
++
26,7 N / 25 mm
85 N / 25 mm
26,7 N / 25 mm
85 N / 25 mm
26,7 N / 25 mm
85 N / 25 mm
tesa 51464
tesa 51465
tesa 51454
tesa 51455
tesa 51444
tesa 51445
Material
blue
blue
blue
blue
blue
blue
Colour
50 µm
80 µm
50 µm
80 µm
50 µm
80 µm
ThicknessProduct
Adhesionon paper
TensileStrength
6 %
6 %
6 %
6 %
6 %
6 %
Elongation at break
++
++
++
++
++
++
Shear Resistance
++
++
++
++
++
++
HeatResistance
Splitting Strip,Slit Liner
Splitting Strip,Slit Liner
Slit Liner
Slit Liner
-
-
Additional Features
Single-sided tapes with liner
tesa Tapes for Paper Production at a Glance
The results were obtained under laboratory conditions. o = limited, + = good, ++ = very good.All tesa tapes for paper production are repulpable according to TAPPI UM 213 A.
®
4004
-106
Detailed Information
For more detailed information, please
refer to the following brochures:
EasySplice CalenderLine
Butt Splicing Solutions
EasySplice FastLine
tesa Solutions for Paper Production at a Glance.
tesa products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All information and recommendations areprovided to the best of our knowledge on the basis of our practical experience. Nevertheless tesa AG can make no warranties, express or implied, including, but not limitedto any implied warranty of merchantability or fitness for a particular purpose. Therefore, the user is responsible for determining whether the tesa product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical support staff will be glad to advise you.
EAST EUROPE
NORTH AMERICA
tesa tape inc.
5825 Carnegie Boulevard
Charlotte, N.C. 28209
Phone +1 800 426 21 81
Fax +1 800 852 88 31
www.tesatape.com
ASIA
tesa tape Asia Pacific Pte.Ltd.
164 Gul Circle,
Singapore 629621
Phone +65 6861 2026
Fax +65 6863 8140
www.tesa-asia.com
tesa tape Kft.
Tartsay Vilmos U.3
H-1126 Budapest
Phone +36 1 457 39 00
Fax +36 1 457 39 01
www.tesa.hu
INTERNATIONAL
NORTH EUROPE
tesa A/S
Klintehøjvaenge 12
DK-3460 Birkerød
Phone +45 4599 8200
Fax +45 4581 0145
www.tesa.dk
SOUTH WEST EUROPE
tesa tape S.A.
Ctra. de Mataró a Granollers, P. Km. 5,4
E-08310 Argentona
Phone +34 93 758 33 00
Fax +34 93 758 34 44
www.tesatape.es
tesa AG
Quickbornstraße 24
D - 20253 Hamburg
Phone +49 40 4909 2942
Fax +49 40 4909 4621
www.tesa.com
SOUTH AMERICA
tesa Brasil Ltda.
Rua Visconde do Rio Branco 1310
CEP 80420210, Conjunto 61
Curitiba, Parana
Phone +55-41 224 81 00
Fax +55-41 224 88 30