TeslaM3 MRI Patient Monitor
TeslaM3
MIPM Monitoring of the 3rd Generation!
TeslaM3
Configuration
Basic configuration 3 Parameters:
ECG, SpO2 , NIBP
All remaining parameters are optional and can be combined independently (except Multi Gas Module and Capnography Module)
‒ IBP 1 & IBP 2‒ Capnography‒ Multi Gas Module‒ Temperature 1 & Temperature 2‒ Remote Screen (with interface for hospital network connectivity)
All Parameters can be upgraded later on!
TeslaSpy
Alarm function indicates critical
magnetic field strength
Green Indicator – Safe area Yellow Indicator – critical magnetic field strength is close
Red Indicator – Critical magnetic field strength exceeded
Integrated magnetic field detector
supports positioning of the monitor.
TeslaM3 wireless technology - Sensors
TeslaM3 is equipped with wireless ECG and SpO2 sensors.
The sensors can easily be stored and charged in the brackets attached to the monitor.
Wireless ECG Sensor
Easy handling of the sensor.
Reduced risk of cable heating due to short cables
Clear ECG during scan due to gradient artifact filter.
Up to 8 hours battery life.
Wireless SpO2 Sensor
Wireless technology and a flexible fiber optical cable make it easy to apply the sensor.
Up to 8 hours battery life.
Soft touch Finger adapters ensure comfortable fit for adult and pediatric patients.This ensures reliable SpO2 readings even during long examinations.
TeslaM3 wireless technology – Remote Monitor
Full functionality in the MRI control room. – TeslaM3 Remote
Ethernet, RS232, 2x USB interface for network connectivity and trend download to a USB drive.
TeslaM3 wireless technology – Remote Monitor
Safe Data transfer
based on signal
amplifier used in the
wave guide / tube
TeslaM3 wireless technology – Remote Monitor
A shielded antenna is places in a tube somewhere in the wall of the MRI cabin.
The antenna transmits the signal to the data unit in the MRI control room.
This ensures 100% data transmission through the faraday cage.
Soft- and Hardware designed by MIPM
Intuitive Display Layout
Clear view on a 15“ touch screenStatus Bar for text
messages and monitor condition
Menu bar
Main screen with parameter boxes
Function Icons
Intuitive Handling – Parameter Menus
Easy to enter parameter menus.
Clear and easy to handle menu structure
Intuitive Handling – Parameter Menus
Intuitive Handling - Adjust Alarm Function
e.g. SpO2 alarm
Intuitive Handling – Display Configuration
Individual settings according to customers preferences.
Intuitive Handling – Display Configuration
9 different colors for parameter curves
Different measurement units for IBP and Capnography
Customize and Save Parameter Alarm Limits for each patient mode.
Patient Data Memory
Assign Patient information to trend data.
Store the Patients personal data and transfer Patient data to a Patient Data Management System
Well arranged Trend Memory
Graphical Layout
Tabular Layout
Event Memory
Store up to 8 Hours of trend data and 100 events.Download the trend data to a USB drive or print directly.Transfer the Patient data to a hospital network.
Magnetic Environment: MRI conditional according to ASTM F 2503 Tested up to 3T Scanner Gauss Restriction: 20 mT / 200G Integrated Magnetic Field Detector – TeslaSpy
Physical Characteristics:Height 140 cm / 55.1 inchWidth 60 cm / 23.6 inchDepth 62 cm / 24.4 inchWeight 36 kg / 79.3 lbs
Technical Information
Technical Information
Power Source: Battery power(up to 6.5 hours) Integrated power supply unit
TeslaM3 can be operated on mains power inside the MRI cabin
Display:Size: 15 Inch ; Ratio 4:3Resolution: 1024 x 768Number of Channels: 6 Waveform ; 4 Numeric
Sensors 8 hours Battery life Battery Charging time
IBP Up to 2 IBP channels Various IBP Transducer types
Technical Information
BDOhmeda
EdwardsBaxter
Medex MX980
Medex MX960
PvB 6300
PvB xtrans
Transpac
UTAH
Multi Gas Module Side Stream measurement (200ml/min) Automatic Anesthetic Agent DetectionAgents (i & et): ISO SEV DES HAL ENFRespiration (i & et): O2 , CO2 , N2O Respiration Rate
Technical Information
Temperature Fiber Optic Sensor Intracorporeal sensor Surface sensor Unit °C
Technical Information
TeslaM3 - Backside
Sensor Antennas
IBP Connectors
Temperature SensorConnector
Water Trap Multi Gas Module
Connector for NIBP Tube
Gating Interface
Storage and Charging of Wireless sensors