Test Report SL52025245655201TX Date:May 20,2020 Page 1 of 3
DONGGUAN TEAMSUN GARMENT CO.,LTD.
ROOM 202, BUILDING 6, NO.8, WANJIANG CHUANGYE INDUSTRIAL ROAD, WANJIANG DISTRICT, DONGGUANG CITY, GUANGDONG PROVINCE, CHINA
The following sample(s) was/were submitted and identified on behalf of the client as:
Sample Description : (A)Disposable medical face mask
Style No. : M01001
Composition : (A)non-woven fabric/ meltblown
Sample Color : (A)blue
Manufacturer : DONGGUAN TEAMSUN GARMENT CO.,LTD.
Proposed Care Instruction : /
Test Performed : Selected test(s) as requested by applicant
Sample Receiving Date : Apr 28, 2020
Testing Period : Apr 28, 2020 - May 20, 2020
Test Result(s) : Unless otherwise stated the results shown in this test report refer only to the sample(s) tested, for further details, please refer to the following page(s).
Signed for and on behalf of
SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd Testing Center
Sara Guo (Account Executive)
Test Report SL52025245655201TX Date:May 20,2020 Page 2 of 3
Test Result Medical Face Masks-Requirements and Test Methods (EN 14683:2019) Clause 5.2.2 Bacterial filtration efficiency (BFE)
*
(EN 14683 :2019 Annex B) 1# 2# 3# 4# 5# (BFE), % 99.7 99.6 99.6 99.6 99.5
Remark: Performance Requirement: Type I≥95%, Type II≥98%, Type IIR≥98%
* This test standard is not within the accredited scope in SGS Shanghai testing centre, it is carried out by external laboratory accredited by CMA (China Metrology Accreditation). Clause 5.2.3 Breathability (Differential Pressure) (EN 14683 :2019 Annex C, Flow rate 8 l/min)
1# 2# 3# 4# 5#
Differential pressure △P (Pa/cm
2)
36 34 36 37 37
Remark: Performance Requirement: Type I<40 Pa/cm
2, Type II<40 Pa/cm
2, Type IIR<60 Pa/cm
2
Clause 5.2.4 Splash Resistance (ISO 22609 :2004, Pressure 16.0 kPa) Penetration on inside surface
1# 2# 3# 4# 5# 6# 7# 8#
Pass Pass Pass Pass Pass Pass Pass Pass
9# 10# 11# 12# 13# 14# 15# 16#
Pass Pass Pass Pass Pass Pass Pass Pass
17# 18# 19# 20# 21# 22# 23# 24#
Pass Pass Pass Pass Pass Pass Pass Pass
25# 26# 27# 28# 29# 30# 31# 32#
Pass Pass Pass Pass Pass Pass Pass Pass
Number of Pass: 32
Overall result: Acceptable
Remark:
1) Performance Requirement Type I: N/A, Type II: N/A, Type IIR: ≥16.0kPa
2) Distance of the medical face mask target area surface to the tip of cannula is 300±10mm.
3) Condition and Test temperature (21±5)°C, relative humidity (85±10)%
4) An acceptable quality limit of 4.0% is met for a single sampling plan when 29 or more of the 32 tested specimens show pass results
Test Report SL52025245655201TX Date:May 20,2020 Page 3 of 3
Clause 5.2.5 Microbial Cleanliness (EN 14683: 2019 Annex D) Sample A 1# 2# 3# 4# 5# CFU/g <1 <1 <1 <1 <1 Remark: Performance Requirement: Type I≤30 CFU/g, Type II≤30 CFU/g, Type IIR≤30 CFU/g
Sample Photo
The statement of conformity in this test report is only based on measured values by the laboratory and does not take their uncertainties into consideration.
***End of Report***