Test Results for Cisco Unified Communications System Release 10.0for JapanFirst Published: April 21, 2014
Last Modified: May 27, 2014
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883
Text Part Number: OL-31616-01
© 2014 Cisco Systems, Inc. All rights reserved.
C O N T E N T S
C H A P T E R 1 Cisco Unified Communications System Test 1
Cisco Unified Communications System Test 1
Cisco Unified Communications System Test for Japan 2
Acronyms 3
C H A P T E R 2 Test Topology and Environment Matrix 7
Test Topology 8
Environment Matrix 9
What's New ? 13
Open Caveats 13
C H A P T E R 3 Test Results Summary 15
Cisco Unified Communications Manager 16
Cisco TelePresence Video Communication Server 49
Cisco Jabber for iPhone and iPad 71
Cisco Jabber for Android 76
Cisco Jabber for Windows 78
Cisco Jabber for Mac 83
Cisco Unified Border Element 85
Cisco Unified Survivable Remote Site Telephony 87
Cisco Unity Connection 88
Cisco Unified Attendant Console 91
Cisco UC Integration™ for Microsoft Lync 92
Cisco Unified Communications Manager Express 94
Cisco TelePresence Multipoint Control Unit 96
Cisco TelePresence Management Suite 103
Cisco TelePresence Conductor 107
Cisco TelePresence Server 117
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 iii
Cisco Collaboration Expressway 125
Regression 135
Related Documentation 136
Test Results for Cisco Unified Communications System Release 10.0 for Japaniv OL-31616-01
Contents
C H A P T E R 1Cisco Unified Communications System Test
• Cisco Unified Communications System Test, page 1
• Cisco Unified Communications System Test for Japan, page 2
• Acronyms, page 3
Cisco Unified Communications System TestCisco Unified Communications System Test, an integral part of the Enterprise Voice Solution Managementis a program that validates and tests specified systems-level solution for the various products and platformsin the Cisco Unified Communications System.
Cisco Unified Communications System Test, the systems integration layer, ensures that the UnifiedCommunications components delivered across the various engineering teams when combined, improves theUnified Communications System software quality. This is achieved by testing the various components.
The requirements for Cisco Unified Communications System Test is derived based on the following:
• Popular customer scenarios
• Input from various Business Units, fields and Cisco Services
The test bed architecture is built based on the Solution Reference Network Design (SRND), cross-section ofproduct deployment models etc. The different types of testing carried out as part of Cisco UnifiedCommunications System Test are:
• Interoperability/Compatibility
• Functionality
• Availability/Reliability/Stability
• Performance/Scalability/Capacity
• Usability, Serviceability
• Special focus area - CAP (Customer Assurance Program), Technical Assistance Center (TAC)
• Security
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 1
Cisco Unified Communications System Test for JapanCisco Unified Communications System Test for Japan, in turn is an add-on testing at the solution level, wherethe requirements gathered are specific to Japanese usage and market. The requirements are derived based onthe following:
• Customer found defects in selected UC products
• High priority cases that are covered by the Cisco Unified Communications System Test team
• Inputs from SEs, TAC team of Cisco Japan
The test execution is carried out on selected UC products, which affect the Japanese segment and that areprioritized by SEs of the Cisco Japan team. Japanese specific equivalents, such as, Japanese locale, ISDNSwitch type being NTT, JPNP for Numbering Plan are implemented.
The objective of Cisco Unified Communications System Test for Japan is to run a sub-set of system testingthat is not covered by Cisco Unified Communications System Test and implement equivalents with Japaneseenvironment such as Japanese OS, localized application, select Cisco Compatible Products, and third partyequipment.
In this Cisco Unified Communications System Test release for Japan, the following components are tested.
• Cisco Unified Communications Manager
• Cisco TelePresence Video Communication Server
• Cisco Unified Attendant Console
• Cisco Jabber for iPhone and iPad
• Cisco Jabber for Android
• Cisco Jabber for Windows
• Cisco Jabber for Mac
• Cisco Unified Border Element
• Cisco Unified Survivable Remote Site Telephony
• Cisco Unity Connection
• Cisco Unified CM IM and Presence
• Cisco UC Integration ™ for Microsoft Lync
• Cisco Unified Communications Manager Express
• Cisco TelePresence Multipoint Control Unit
• Cisco TelePresence Management Suite
• Cisco TelePresence Server 7010
• Cisco TelePresence Server on VM
• Cisco TelePresence Conductor
• Cisco Expressway
Test Results for Cisco Unified Communications System Release 10.0 for Japan2 OL-31616-01
Cisco Unified Communications System TestCisco Unified Communications System Test for Japan
AcronymsDescriptionAcronym
Audible Message Waiting IndicatorAMWI
Automated Alternate RoutingAAR
Alternate Network Address TranslationANAT
Alternate Contact NumberACN
Automatic Call DistributionACD
Automatic gain controlAGC
Adaptive Security ApplianceASA
American Standard Code for Information InterchangeASCII
Analog Telephone AdapterATA
Bulk Administration toolBAT
Busy Lamp FieldBLF
Channel Associated SignalingCAS
Call Control DiscoveryCCD
Call Detail RecordCDR
Caller Entered DigitsCED
Call Forward AllCFA
Call Forward BusyCFB
Customer Found DefectCFD
Call Forward No AnswerCFNA
Call Forward No CoverageCFNC
Call Forward UnregisteredCFUR
Cisco Jabber for AndroidCJA
Cisco Jabber for iPhoneCJI
Cisco Jabber for iPadCJIP
Cisco Jabber For WindowsCJW
Command Line InterfaceCLI
Calling Line IdentificationCLID
Cisco Unified Communications Manager ExpressCME
Clustering over WANCoW
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 3
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Client Services FrameworkCSF
Calling Search SpaceCSS
Computer Telephony InterfaceCTI
Computer Telephony IntegrationCTI
Certificate Trust ListCTL
Cisco Unified Attendant ConsoleCUAC
Cisco Unified Border ElementCUBE
Cisco Unity ConnectionCUC
Cisco UC Integration ™ for Microsoft LYNCCUCI-LYNC
Cisco Unified Communications ManagerCUCM
Device and Credential RepositoryDCR
Dynamic Host Configuration ProtocolDHCP
Direct In-Ward DialingDID
Directory NumberDN
Do Not DisturbDND
Delayed OfferDO
Digital Private Network Signaling SystemDPNSS
Differentiated Services Code PointDSCP
Extension MobilityEM
Extension Mobility Cross ClusterEMCC
Early OfferEO
Foreign Exchange StationFXS
GatewayGW
Graphical User InterfaceGUI
Historical ReportingHR
High AvailabilityHA
High DefinitionHD
Hyper Text Markup LanguageHTML
Inter Cluster TrunkICT
Instant MessagingIM
IP Phone MessengerIPPM
Test Results for Cisco Unified Communications System Release 10.0 for Japan4 OL-31616-01
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Integrated Services Digital NetworkISDN
Initial Trust ListITL
Key Expansion ModuleKEM
Light Weight Directory Access ProtocolLDAP
Multipoint Control UnitMCU
Media Gateway Control ProtocolMGCP
Music on holdMOH
Media Resource Group ListMRGL
Message Waiting IndicatorMWI
Non Linear ProcessingNLP
Network Time ProtocolNTP
On Screen DisplayOSD
Plain Old Telephony SystemPOTS
Personal Communication AssistantPCA
PC over IPPCoIP
Peer Firmware SharingPFS
Personal identification numberPIN
Picture in PicturePIP
Primary Rate InterfacePRI
Problem Reporting ToolPRT
Public Switched Telephone NetworkPSTN
Quality Report ToolQRT
Q-Signaling protocolQSIG
Really Simple SyndicationRSS
Real Time Monitoring ToolRTMT
Realtime Transport ProtocolRTP
Service Advertisement FrameworkSAF
Session Initiation ProtocolSIP
Cisco Unified Communications Manager Session Management EditionSME
Skinny Client Control ProtocolSCCP
Standard DefinitionSD
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 5
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Cisco Unified Survivable Remote Site TelephonySRST
Secure Socket layerSSL
Technical Assistant centerTAC
Transmission Control ProtocolTCP
Transport Layer SecurityTLS
Cisco Telepresence Management SuiteTMS
Cisco TelePresence ConductorTPC
Trust Relay PointTRP
Cisco TelePresence ServerTS
Telephony User InterfaceTUI
Unified Computing SystemUCS
Unified Messaging GatewayUMG
Uniform Resource IdentifierURI
Cisco TelePresence Video Communication ServerVCS
Voice GatewayVGW
Voice over IPVoIP
Voice Profile for Instant MessagingVPIM
Voice Mail NotificationVMN
Virtual Private NetworkVPN
TelePresence Server on VMVTS
Wide Area NetworkWAN
Wireless FidelityWi-Fi
Wireless LAN ControllerWLC
Test Results for Cisco Unified Communications System Release 10.0 for Japan6 OL-31616-01
Cisco Unified Communications System TestAcronyms
C H A P T E R 2Test Topology and Environment Matrix
• Test Topology, page 8
• Environment Matrix, page 9
• What's New ?, page 13
• Open Caveats, page 13
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 7
Test TopologyFigure 1: Topology in Use
Test Results for Cisco Unified Communications System Release 10.0 for Japan8 OL-31616-01
Test Topology and Environment MatrixTest Topology
Environment MatrixComponent Matrix
VersionDetailsComponentApplications
10.0.1.10000-24Cisco Unified CommunicationsManager
Call Control
10.0.1.9902-70(JP)Locale
3-1-9.JPDial Plan
10.0(1)Cisco Unified CommunicationsManager Express
15.4(1.24)T0IOS
10.0.2.7 (JP)Locale
10.0(1)Cisco Unified SurvivableRemote Site Telephony (SRST)
15.4(1.24)T0IOS
X8.1Cisco Telepresence VideoCommunication Server (VCS)
X7.2_LanguagePacks_BETALocale
10.0.1.10 - 63CiscoUnifiedAttendant ConsoleApplications
10.0.1.10000-26Cisco Unified CommunicationsManager IM and PresenceService 10.0.1.1000-1 (JP)Locale
10.0.1.10000-24Cisco Unity ConnectionVoice Mail and UnifiedMessaging
10.0.0.1-1(JP)Locale
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 9
Test Topology and Environment MatrixEnvironment Matrix
Component Matrix
VersionDetailsComponentApplications
9-4-1-3Unified IP Phones6921/41/45/61
End points
9-3-1SR4-1Cisco Unified IP Phones7942/62/75
1.4(5)Cisco Unified IP Phone 7925
9-3-3-5Cisco Unified IP Phone 8831
10.1.1.9Cisco Unified IP Phone7821/41/61
9-4-1-8Cisco Unified IP Phones8941/8945
9-4-1-9Cisco Unified IP Phones9951/9971
10-2-1JBT0-222Cisco Desktop CollaborationExperience DX650
9.6.0.621CiscoUC Integration™ for Lync
TC7.0.2EX60 - Cisco TelePresenceSystem EX60
TC7.0.2EX90 - Cisco TelePresenceSystem EX90
TC7.0.2SX20 - Cisco TelePresenceSX20 Quick Set
TC7.0.2C20 - Cisco TelePresenceSystem Quick Set C20
TC7.0.2Cisco TelePresence SystemIntegrator Package C90
TX6.1.1(50)500 - 32 Cisco TelePresenceSystem 500-32
TX6.1.1(50)Cisco TX9000 -CiscoTelePresence TX9000
Test Results for Cisco Unified Communications System Release 10.0 for Japan10 OL-31616-01
Test Topology and Environment MatrixEnvironment Matrix
Component Matrix
VersionDetailsComponentApplications
15.4(1)T1IOSGatewaysCommunicationsInfrastructure
10.0.0Cisco Unified Border Elementfor ISR
2.1.1aCisco UCS6140
Fabric Interconnect PRIMARY
2.1.1aCisco UCS6140
Fabric InterconnectSUBORDINATE
2.1.1aCisco UCS6140
Fabric Cluster
ESXi 5.1.0ESXi host
ESXi 5.1.0VCenter Server
5.2(2a)M9500MDS Switch
9.2.3ATA 187Cisco Analog TelephoneAdaptor
15.0.2-SE5Cisco 3750 PoE Switch
14.3.2Cisco TelepresenceManagementSuite
TelePresence
4.4(3.67)4510Cisco Telepresence MCU
4.4(3.67)5310
MCU_4-3_UI_and_audio_JPN.packageLocale
3.1(1.96)Cisco Telepresence Server onVM
XC2.2.1Cisco Telepresence Conductor
3.1(1.97)Cisco Telepresence Server 7010
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 11
Test Topology and Environment MatrixEnvironment Matrix
Component Matrix
VersionDetailsComponentApplications
7.6.110.0Wireless LAN Controller 2504Wireless and Mobility
15.2Wireless Access Point 1142
15.2Wireless Access Point 35XX
9.2.2.165297Cisco Jabber for Mac
9.6.0.17088Cisco Jabber for Windows
9.6.1.163935Cisco Jabber for iPhone and iPad
Apple iOS 7.0.4iPhone 5
Apple iOS 7.0.4iPad
9.6.0.165769Cisco Jabber for Android
Android OS 4.2.2Galaxy SII andS4
Windows 7 - SP1 (Japanese)Windows 7-SP1
Operating SystemClient
Windows 8 (Japanese)Windows 8
10.8Mac
IE 9,10 (Supported Japaneselanguage )
IEBrowser
Firefox 27.0.1 (SupportedJapanese language)
Mozilla
Chrome 33.0 (SupportedJapanese language )
Chrome
2010Microsoft Lync Client
Windows Server 2008 (R2Enterprise - Japanese )
Windows ServerServer
Windows Server 2012 (Japanese )
2010Exchange Server
2010Lync Server
Test Results for Cisco Unified Communications System Release 10.0 for Japan12 OL-31616-01
Test Topology and Environment MatrixEnvironment Matrix
What's New ?Cisco Unified Attendant Console
Cisco Unified Attendant Console Advanced replaces Cisco Unified Attendant Console Business Edition ,Cisco Unified Attendant Console Enterprise Edition , Cisco Unified Attendant Console Premium Edition andconsolidates their Functionality into One product .Its powerful call queuing engine helps your operators easilymanage a high call volume from a variety of sources. The robust directory can handle up to 100,000 contactsand synchronize directly with Microsoft Active Directory.
Cisco Desktop Collaboration Experience DX650
Mid-sized and enterprise businesses can introduce newways of collaborating with the DX650. This smart-deskendpoint simplifies workflows and boosts the productivity of employees who work at a desk. Staff can worktheir way, whether at corporate or branch locations in open office environments, virtual offices or sharedworkspaces or when teleworking
Cisco Unified IP Conference Phone 8831
The Cisco Unified IP Conference Phone 8831 delivers highly secure, comprehensive, and mission-criticalunified communications, with wideband, full-duplex audio performance and flexible accessory options. It isideal for conference rooms and executive offices within midsize and enterprise businesses supported by CiscoUnified Communications Manager or Cisco Business Edition 6000
Cisco TelePresence Server on VM
In this System Release Cisco TelePresence Server virtualization is supported.
Cisco Expressway Overview
Cisco Expressway will allow connection to the corporate network without the need of VPN. In the CiscoExpressway solution, endpoint registration, call control, provisioning, messaging and presence services areprovided by Cisco Unified Communications Manager (Cisco Unified CM). VCS allows users to access thecorporate service while working remotely without need for VPN.
Cisco IP Phone 7821/41/61
The Cisco IP Phones 7821/41/61 is easy to deploy and manage, with features such as enhanced flexibility andcustomization with a field-replaceable bezel option , dedicated fixed keys for common functions such asconference, messaging, and directory, and a two-way navigation button . The Cisco IP Phones 7821/41/61also supports wideband audio for superior voice quality and offers advanced IP communications features.
Open CaveatsTitleDefect ID
Cisco Unified Communications Manager
Audible Message Waiting indicator is not workingin 8831 IP Phone
CSCuj76467
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 13
Test Topology and Environment MatrixWhat's New ?
TitleDefect ID
"Enter the number to transfer" option is not found in8831
CSCuj93496
Details showing wrongly at the time of conference inDX650
CSCum79058
FOR DN is displayed wrongly in DX650 when CFAis set.
CSCum81613
Conference members count is not decreasinginDX650when in conference
CSCum81627
No conference timer on 6921/61 phones whilepressing Details softkey
CSCum82008
Unable to answer conference in SCCP load afterpressing Details softkey
CSCum81985
Phone display language is not updated immediatelyto phones
CSCun02402
78xx:Phone do not get any ringtone whenDefault(Ring) is set to phones
CSCun27648
Cisco VCS
SX20 Quickset Touch-UI Going off State Afterenabled Extended logging
CSCul13054
Unable to display "Sign In Successful" message inC20 Touch UI for EM user
CSCul01896
Unable to transfer call from EX90 registered in CiscoVCS
CSCum74055
Japanese display ID not coming in SX20 registeredin Cisco VCS
CSCun12798
SX20 transmitting video after setting default call rateas 64 kbps
CSCun28040
Complete Transfer option is not comingwhile transferusing Start new
CSCun08178
Cisco TelePresence Conductor
8941 IP Phones get reboot after transfer theconference call from EX/SX
CSCul04054
Test Results for Cisco Unified Communications System Release 10.0 for Japan14 OL-31616-01
Test Topology and Environment MatrixOpen Caveats
C H A P T E R 3Test Results Summary
• Cisco Unified Communications Manager, page 16
• Cisco TelePresence Video Communication Server, page 49
• Cisco Jabber for iPhone and iPad, page 71
• Cisco Jabber for Android, page 76
• Cisco Jabber for Windows, page 78
• Cisco Jabber for Mac, page 83
• Cisco Unified Border Element, page 85
• Cisco Unified Survivable Remote Site Telephony, page 87
• Cisco Unity Connection, page 88
• Cisco Unified Attendant Console, page 91
• Cisco UC Integration™ for Microsoft Lync, page 92
• Cisco Unified Communications Manager Express, page 94
• Cisco TelePresence Multipoint Control Unit, page 96
• Cisco TelePresence Management Suite, page 103
• Cisco TelePresence Conductor, page 107
• Cisco TelePresence Server, page 117
• Cisco Collaboration Expressway, page 125
• Regression, page 135
• Related Documentation , page 136
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 15
Cisco Unified Communications ManagerDefectsStatusCall Component
FlowDescriptionTitleLogical ID
Passed7841 IP Phone->Unified CM 1 ->SIPTrunk->CUBE->SIP Trunk->Unified CM2->99XX IPPhone
Verify thatuser able tomake call from7841 series IPPhone to99XX IPPhone throughCUBE havingSIP Trunkwith Cluster1and havingSIP Trunkwith Cluster2using SpeedDial Button
Place call from7841 series IPPhone usingSpeed DialButton to 9951 IPPhone throughCUBE havingSIP Trunk withCluster1 andhaving SIP Trunkwith Cluster2
UCJ10Ph2S.CUCM.G.661
Passed7841 IP Phone1->UnifiedCM1->SIP trunk ->CUBE -> SIPtrunk -> UnifiedCM2 -> 7841 IPPhone2 ->Unified CM2->7841 IP Phone3
To verify that7841 phonehandles thecallconference viaCUBEsuccessfully
Conference from3 IP phones(7841) via CUBE
UCJ10Ph2S.CUCM.G.691
Passed7841 IP Phone1->UnifiedCM1->7841 IP Phone2->UnifiedCM1->IP Phone3
To verify that7841 phonehandles thecallconferencewithconsultationsuccessfullyusing non7841 phones
Conference callbetween IPphones(7841)with consultationfrom IP phone Dusing SWAP
UCJ10Ph2S.CUCM.G.694
Test Results for Cisco Unified Communications System Release 10.0 for Japan16 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed7841 IP Phone1-> Unified CM1-> SIP trunk ->Unified CM2 ->7841 IP Phone2
Verify that theCisco unifiedIP phone Adisplays theDN of theCisco unifiedIP phone B (inhunt list)which is inother cluster
Display the DNof IP Phonepresent in HuntList in Unified IPPhone A
UCJ10Ph2S.CUCM.G.718
Passed7841 IP Phone1-> Unified CM1-> 7841 IPPhone2 ->Unified CM1 ->792x Phone C
Verify that7841 phoneshandles thatcall transfersuccessfully to792x phones
Make a call from7841 phone A tophone B, PhoneB transfers thecall to phone C(792X)
UCJ10Ph2S.CUCM.G.744
PassedUnified IP PhoneA -> Unified CM-> Unified IPPhone B
Verifywhether callcan be madesuccessfullyusing UnifiedIP Phone A toUnified IPPhone B,where theUnified IPPhone B isassigned to theparticularCUCM uservia Self-carePortal GUIpage
Make call toUnified IP PhoneA from UnifiedIP Phone Bwhere Unified IPPhone B isassigned to aCUCM user viaSelf-Care portalGUI page(intra)
UCJ10Ph2S.CUCM.G.047
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 17
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM1 -> SIP Trunk ->Unified CM 2 ->Unified IP PhoneB
Verifywhether callcan be madesuccessfullyusing UnifiedIP Phone Aregistered inUnified CM 1to Unified IPPhone Bregistered inUnified CM 2via SIP trunk,where theUnified IPPhone B isassigned to theparticularCUCM uservia Self-carePortal GUIpage
Make call toUnified IP PhoneA from UnifiedIP Phone Bwhere Unified IPPhone B isassigned to aCUCM user viaSelf-Care portalGUI page(SIP)
UCJ10Ph2S.CUCM.G.048
PassedPhone C ->Unified CM1 ->Phone A ->Unified CM1 ->Phone B
Verifywhether thecalls tomanager ishandled bysingle assistantwhen inshared linemode
Call to Manageris handled bySingle Assistantin Shared lineMode
UCJ10Ph2S.CUCM.G.240
PassedPhone A ->Unified CM1 ->Phone B
Verifywhether themanager cantogglebetween theDND ringeroff and onfeature ontheir phone
DND Ringer offon Managersphone
UCJ10Ph2S.CUCM.G.245
Test Results for Cisco Unified Communications System Release 10.0 for Japan18 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM1 -> SIP trunk ->Unified CM 2 ->Unified IP PhoneB
Verifywhether callduration isshown in callhistory in69xx phoneswhen a call ismade fromUnified IPPhone Aregistered inUnified CM 1to Unified IPPhone Bregistered inUnified CM 2via SIP trunk.
Make callbetween twoUnified IPPhones(69xx) toview the callduration in callhistory(SIP)
UCJ10Ph2S.CUCM.G.002
PassedUnified IP PhoneA -> Unified CM1 -> PSTN ->Unified CM 2 ->Unified IP PhoneB
Verifywhether callduration isshown in callhistory in69xx phoneswhen a call ismade fromUnified IPPhone Aregistered inUnified CM 1to Unified IPPhone Bregistered inUnified CM 2via PSTNtrunk.
Make callbetween twoUnified IPPhones(69xx) toview the callduration in callhistory(PSTN)
UCJ10Ph2S.CUCM.G.008
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 19
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM-> Unified IPPhone B ->Unified CM ->Unified IP PhoneC
Verifywhether callduration isshown in callhistory in69xx phoneswhen a call ismade fromUnified IPPhone A toUnified IPPhone Binside a singlecluster andtransferred thecall to UnifiedIP Phone C.
Transfer callbetween UnifiedIP Phones(69xx)to view the callduration in callhistory(intra)
UCJ10Ph2S.CUCM.G.009
PassedUnified IP PhoneA -> Unified CM1 -> ICT trunk ->Unified CM 2 ->Unified IP PhoneB -> Unified CM2 -> Unified IPPhone C
Verifywhether callduration isshown in callhistory in69xx phoneswhen a call ismade fromUnified IPPhone Aregistered inUnified CM 1to Unified IPPhone Bregistered inUnified CM 2via ICT trunkand transferthe call toUnified IPPhone Cwhich isregistered inUnified CM 2.
Transfer callbetween UnifiedIP Phones(69xx)to view the callduration in callhistory (ICT)
UCJ10Ph2S.CUCM.G.011
Test Results for Cisco Unified Communications System Release 10.0 for Japan20 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM1 -> SIP Trunk ->Unified CM 2->Unified IPPhone B
To verify theconversationaudio qualitywhen usermake a callfrom oneCluster toanotherClusterthrough SIPtrunk afterenabling thePSTN modefor 69xxseries.
To verify theconversationaudio qualitywhen user makea call fromCluster A toCluster B throughSIP trunk.
UCJ10Ph2S.CUCM.S.123
PassedUnified IP PhoneA -> Unified CM-> Unified IPPhone B
Verify theconversationaudio qualitywhen usermake a callbetween 69xxand other typeof IP Phoneafter enablingthe PSTNmode option
To verify theconversationaudio qualitywhen user makea call between69xx IP phoneand other type ofIP Phone afterenabling thePSTN modeoption on 69xx IPphone.
UCJ10Ph2S.CUCM.S.122
PassedUnified IP PhoneA -> Unified CM1 -> ICT Trunk ->Unified CM 2->Unified IPPhone B
To verify theconversationaudio qualitywhen usermake a callfrom oneCluster toanotherClusterthrough SIPtrunk afterenabling thePSTN modefor 69xxseries.
To verify theconversationaudio qualitywhen user makea call fromCluster A toCluster B throughICT trunk.
UCJ10Ph2S.CUCM.S.124
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 21
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM1 -> H.323 ->CUBE ->H.323-> UnifiedCM 2 ->UnifiedIP Phone B
To verify theconversationaudio qualitywhen usermake a callfrom oneCluster toanotherClusterthroughH.323after enablingthe PSTNmode for 69xxseries.
To verify theconversationaudio qualitywhen user makea call from oneCluster to anotherCluster throughH.323.
UCJ10Ph2S.CUCM.S.125
PassedUnified IP PhoneA -> Unified CM1 -> PSTN ->Unified CM 2->Unified IPPhone B
To verify theconversationaudio qualitywhen usermake a callfrom oneCluster toanotherClusterthrough PSTNafter enablingthe PSTNmode for 69xxseries.
To verify theconversationaudio qualitywhen user makea call from oneCluster to anotherCluster throughPSTN.
UCJ10Ph2S.CUCM.S.126
PassedPhone A ->Unified CM1 ->Phone B ->Unified CM1 ->Phone C
Verifywhether thevolumechange forcalls duringmeet meconference isnot auto savedin 69XXphones
The volumechange for callsduring meet meconference is notauto saved in69XX phones
UCJ10Ph2S.CUCM.G.206
Test Results for Cisco Unified Communications System Release 10.0 for Japan22 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedPhone A ->Unified CM1 ->Phone B; PhoneA -> UnifiedCM1 -> Phone C;Phone A ->Unified CM1 ->Phone D
Verifywhether thevolumechange duringchainedconference in894X phonesis savedautomatically.
The volumechange duringchainedconference in894X phones issavedautomatically
UCJ10Ph2S.CUCM.G.209
PassedPhone A ->Unified CM1 ->Phone B ->Unified CM1 ->Phone C
Verifywhether thevideoconferenceamong phoneswherefirmwareshared via PFSis successful
Videoconferencing forphones wherefirmware sharedvia PFS
UCJ10Ph2S.CUCM.G.223
PassedPhone A ->Unified CM1 ->Phone B ->Unified CM1 ->Phone C ->Unified CM1 ->Phone D ->Unified CM1 ->Phone E
Verifywhether thechainedconferenceamong phoneswherefirmwareshared via PFSis successful
Chainedconferencing forphones wherefirmware sharedvia PFS
UCJ10Ph2S.CUCM.G.224
PassedPhone A ->Unified CM1 ->Phone B; PhoneD -> UnifiedCM1 -> Phone C
Verifywhether thevolumechange duringcalls forremote-in-usephone (69XX)is savedautomatically
The volumechange forremote-in-use issavedautomatically in69XX phones
UCJ10Ph2S.CUCM.G.203
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 23
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM1-> ICT trunk ->Unified CM 2 ->Unified IP PhoneB
Verifywhether callcan be madesuccessfullyusing UnifiedIP Phone Aregistered inUnified CM 1to Unified IPPhone Bregistered inUnified CM 2via ICT trunk,where theUnified IPPhone B isassigned to theparticularCUCM uservia Self-carePortal GUIpage
Make call toUnified IP PhoneA from UnifiedIP Phone Bwhere Unified IPPhone B isassigned to aCUCM user viaSelf-Care portalGUI page(ICT)
UCJ10Ph2S.CUCM.G.049
PassedUnified IP PhoneA -> Unified CM1 -> PSTN ->Unified CM 2 ->Unified IP PhoneB
Verifywhether callcan be madesuccessfullyusing UnifiedIP Phone Aregistered inUnified CM 1to Unified IPPhone Bregistered inUnified CM 2via PSTNtrunk, wherethe Unified IPPhone B isassigned to theparticularCUCM uservia Self-carePortal GUIpage
Make call toUnified IP PhoneA from UnifiedIP Phone Bwhere Unified IPPhone B isassigned to aCUCM user viaSelf-Care portalGUI page(PSTN)
UCJ10Ph2S.CUCM.G.050
Test Results for Cisco Unified Communications System Release 10.0 for Japan24 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedPhone D ->Unified CM1 ->Hunt pilot ->Unified CM1 ->Phone A
Verifywhether thecall to huntpilot numberfor phoneswherefirmwareshared via PFSis successful
Call to Hunt pilotfor phones wherefirmware sharedvia PFS
UCJ10Ph2S.CUCM.G.221
PassedPhone A ->Unified CM1 ->Phone B ->Unified CM1 ->Voice Mail
Verifywhether themanager cantransfer anincoming callto voicemessagingservice.
Transfer anincoming call toVoice MessagingService onManagers phone
UCJ10Ph2S.CUCM.G.239
PassedPhone A ->Unified CM1 ->Phone B
Verifywhether thephone logs forsingle SIPphone arecollected fromremote logserver bysetting theprofile aspreset.
Collecting PhoneLogs of singleSIP phone bysetting the profileto Preset
UCJ10Ph2S.CUCM.G.225
PassedPhone A ->Unified CM1 ->Phone B
Verifywhether thephone logs forsingle SIPphone arecollected fromremote logserver whenthe LEVELoption is setfor Log server
Collecting PhoneLogs for singleSIP phone bysetting theLEVEL optionsfor Log server
UCJ10Ph2S.CUCM.G.229
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 25
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM1 -> PSTN ->Unified CM 2 ->Unified IP PhoneB -> Unified CM2 -> Unified IPPhone C
Verifywhether callduration isshown in callhistory in69xx phoneswhen a call ismade fromUnified IPPhone Aregistered inUnified CM 1to Unified IPPhone Bregistered inUnified CM 2via PSTNtrunk andtransfer thecall to UnifiedIP Phone Cwhich isregistered inUnified CM 2.
Transfer callbetween UnifiedIP Phones(69xx)to view the callduration in callhistory (PSTN)
UCJ10Ph2S.CUCM.G.016
Test Results for Cisco Unified Communications System Release 10.0 for Japan26 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM1 -> SIP trunk ->Unified CM 2 ->Unified IP PhoneB -> Unified CM2 -> Unified IPPhone C
Verifywhether callduration isshown in callhistory in69xx phoneswhen a call ismade fromUnified IPPhone Aregistered inUnified CM 1to Unified IPPhone Bregistered inUnified CM 2via SIP trunkand park thecall in UnifiedIP Phone Band retrievedthe call inUnified IPPhone Cwhich isregistered inUnified CM 2.
Park the call andretrieve inUnified IPPhones(69xx) toview the callduration in callhistory (SIP)
UCJ10Ph2S.CUCM.G.018
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 27
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM1 -> ICT trunk ->Unified CM 2 ->Unified IP PhoneB -> Unified CM2 -> Unified IPPhone C
Verifywhether callduration isshown in callhistory in69xx phoneswhen a call ismade fromUnified IPPhone Aregistered inUnified CM 1to Unified IPPhone Bregistered inUnified CM 2via ICT trunkand park thecall in UnifiedIP Phone Band retrievedthe call inUnified IPPhone Cwhich isregistered inUnified CM 2.
Park the call andretrieve inUnified IPPhones(69xx) toview the callduration in callhistory (ICT)
UCJ10Ph2S.CUCM.G.019
Test Results for Cisco Unified Communications System Release 10.0 for Japan28 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM1 -> PSTN ->Unified CM 2 ->Unified IP PhoneB -> Unified CM2 -> Unified IPPhone C
Verifywhether callduration isshown in callhistory in69xx phoneswhen a call ismade fromUnified IPPhone Aregistered inUnified CM 1to Unified IPPhone Bregistered inUnified CM 2via PSTNtrunk and parkthe call inUnified IPPhone B andretrieved thecall in UnifiedIP Phone Cwhich isregistered inUnified CM 2.
Park the call andretrieve inUnified IPPhones(69xx) toview the callduration in callhistory (PSTN)
UCJ10Ph2S.CUCM.G.024
PassedNAVerify that"CiscoUnifiedCMAdministration"webapplicationshould log inwithoutprompting anyusercredential.
Log-in allowsautomaticallywhen userlaunches the"Cisco UnifiedCMAdministration"web application.
UCJ10Ph2S.CUCM.S.101
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 29
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedNAVerify that"CiscoUnifiedOperatingSystemAdministration"webapplicationshould log inwithoutprompting anyusercredential.
Log-in allowsautomaticallywhen userlaunches the"Cisco UnifiedOperating SystemAdministration"web application.
UCJ10Ph2S.CUCM.S.102
PassedPhone A ->Cluster1 -> PhoneB
Verify that callon 7821 seriesIP Phone getsattendautomaticallyusing AutoAnswer withSpeakerphoneoption whenSpeakerphoneis on in 7821series IPPhone
Answer the callon 7821 series IPPhone usingAutoAnswer withSpeakerphone
UCJ10Ph2S.CUCM.G.901
PassedPhone A ->Unified CM1->Phone B ->Unified CM 1 ->Phone B
Verify thatcalls comingto 7821 seriesIP Phoneforwardingsuccessfully todestinationwhile usingCall ForwardAll Feature
Forward the callscoming to 7821series IP Phoneusing CallForward AllFeature
UCJ10Ph2S.CUCM.G.903
Test Results for Cisco Unified Communications System Release 10.0 for Japan30 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedPhone A ->Unified CM1->Phone B ->Unified CM 1- >Phone C
Verify thatcalls comingto 7821 seriesIP Phoneforwardingsuccessfully todestinationwhile usingConditionalCallForwardingFeature
Forward the callscoming to 7821series IP PhoneusingConditionalCall ForwardingFeature
UCJ10Ph2S.CUCM.G.904
Passed7821 IPPhone1->UnifiedCM1->SIPTrunk->UnifiedCM2->7821 IPPhone2->9951 IPPhone
Verify thatuser able topark an intercluster activecall comingthrough SIPTrunk withCluster1 andCluster2 on7821 series IPPhone andretrieve theparked call onanother IPPhonesuccessfully
Park an intercluster active callcoming throughSIP Trunk withCluster1 andCluster2 on 7821series IP Phone
UCJ10Ph2S.CUCM.G.906
Passed7821 IP Phone ->Unified CM->7861 IP Phone
Verify thatuser able toattend sharedline call in7821 series IPPhonesuccessfully
Attend sharedline call in 7821series IP Phone
UCJ10Ph2S.CUCM.G.910
Passed7861 IP Phone ->Unified CM ->9951 IP Phone
Verify thatuser able tomake call from7821 series IPPhone to anyother IP Phoneusing SpeedDial Button
Place call from7821 series IPPhone usingSpeed DialButton
UCJ10Ph2S.CUCM.G.911
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 31
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed7861 IPPhone->UnifiedCM1->SIPTrunk->UnifiedCMr2->9951 IPPhone
Verify thatuser able tomake call from7821 series IPPhone to 9951IP Phonethrough SIPTrunk withCluster1 andCluster2 usingSpeed DialButton
Place call from7821 series IPPhone usingSpeed DialButton to 9951 IPPhone throughSIP Trunk withCluster1 andCluster2
UCJ10Ph2S.CUCM.G.912
Passed7861 IP Phone1-> Unified CM1-> 7861 IPPhone2 ->Unified CM1 ->9951 IP Phone
Verify thatuser able totransfer thecall from 7821series IPPhone toanothernumbersuccessfully
Transfer the callfrom 7821 seriesIP Phone toanother number
UCJ10Ph2S.CUCM.G.913
Passed1.7861 IP PhoneA ->UnifiedCM-> IP phone B2.7861 IP phoneC->UnifiedCM->IP Phone A
To verify thatthe 7821phoneshandles thewhen secondline callwaiting toneon single beepmodesuccessfully
Make a call FormIP PhoneA(7821) to IPphoneB(7821),callfrom IP phone Cto IP phone Aand hear the callwaiting tone
UCJ10Ph2S.CUCM.G.915
Passed7821 IP Phone1-> Unified CM ->7821 IP Phone2
To verify that7821 phonehandles thecorrectly usingFAC beforecalling
IP phones(7821)calls usingForcedauthorizationcode
UCJ10Ph2S.CUCM.G.918
Passed7821 IP Phone1->UnifiedCM1->7821 IP Phone2->UnifiedCM1->7821 IP Phone3-> Unified CM1-> 7821 IPPhone4
To verify that7821 phonehandles thecallconferencesuccessfully
MakeConferencefrom an IPphones (7821) A,B, C and D
UCJ10Ph2S.CUCM.G.919
Test Results for Cisco Unified Communications System Release 10.0 for Japan32 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed7821 IP Phone1-> Unified CM1-> 7821 IPPhone2 ->Unified CM1 ->Voicemail
Verify that acall isredirected byImmediateDivert to avoice-messagingmail box thatis specified inthevoice-messagingprofileassociatedwith thecalling party
Divert calls usingIP phones(7821)
UCJ10Ph2S.CUCM.G.920
Passed7821 IP Phon2 ->Unified CM1->7821 IP Phone1
Verify that the7821 IP Phonehandles theDND featurein a CiscoUnified IPPhonesuccessfully.
Activate Do NotDisturb featureon an IPPhone(7821)
UCJ10Ph2S.CUCM.G.921
Passed7821 IP Phone1-> Unified CM1-> 7821 IPPhone2
Verify theability tomakea basicIP-to-IP callafter logginginto the CiscoUnified CallManagerExtensionMobility.
Basic IP-to-IPCallFunctionalityafter Logginginto Unified CallManagerAssistant
UCJ10Ph2S.CUCM.G.922
Passed7821 IP Phone1-> Unified CM1-> 7821 IPPhone2
To verify thatthe IP phoneshandles thehold reversionsuccessfully inallocatedduration.
Hold reversionusing IPphones(7821)
UCJ10Ph2S.CUCM.G.923
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 33
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed7821 IPPhone->UnifiedCM1-> SIPTrunk->UnifiedCM2->HuntPilot
Verify thatCisco unifiedIP phone Afrom site AUnified CMmakes call toCisco unifiedIP phonespresent in huntlist by dialinghunt pilotnumber
Display ofconnectedphone's DN inCisco unified IPphone A whencall made to huntlist present withincluster A
UCJ10Ph2S.CUCM.G.925
PassedNoVerify that theCisco unifiedIPphones(7821)handles thelineindicationsstatus displaysuccessfully
Verify lineindications statususing IP Phones(7821)
UCJ10Ph2S.CUCM.G.927
Passed7821 IP Phone1-> Unified CM1-> 7821 IPPhone2 ->Unified CM1 ->7821 IP Phone3->Unified CM1 ->7821 IP Phone4-> Meet-me
Verify that thePhone D(7821Phone) joins ameet meconferencecall wherePhone A,Phone B andPhone C isalready in aconferencecall
Call made from7821 Phone to ameet meconferencenumber to join aconference
UCJ10Ph2S.CUCM.G.928
Passed7821 IP Phone1->UnifiedCM1->7821 IP Phone2
Verify that IPPhone(7821)handles themutesuccessfully
Mute : make acall from IPPhone A (7821)to IP Phone Band mute
UCJ10Ph2S.CUCM.G.930
Test Results for Cisco Unified Communications System Release 10.0 for Japan34 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed7821 IP Phone1-> Unified CM1-> 795 Phone A
To verifywhether both7821 IP phoneand 7925phones areregistered andattempting acall from 7821IP Phone to7925G.
Make callbetween 7821 IPphone A to 7925Phone and viceversa
UCJ10Ph2S.CUCM.G.934
Passed99XX IPPhone->UnifiedCM2-> SIPTrunk-> UnifiedCM1->7861 IPPhone
Verify that callon 7861 seriesIP Phonecomingthrough SIPTrunk withCluster1 andCluster2 getsattendedautomaticallyusing AutoAnswer withSpeakerphoneoption whenSpeakerphoneon in 7861series IPPhone
Answer theinter-cluster callon 7861 series IPPhone comingthrough SIPTrunk withCluster1 andCluster2 usingAuto AnswerwithSpeakerphoneoption
UCJ10Ph2S.CUCM.G.937
Passed9951 IP Phone1->Unified CM1->9951 IPPhone2-> SIPTrunk->UnifiedCMr2->7861 IPPhone1
Verify thatcalls comingthrough SIPTrunk withCluster1 andCluster2 to7861 series IPPhoneforwardingsuccessfully todestinationwhile usingCall ForwardAll Feature
Forward theinter-cluster callscoming throughSIP Trunk withCluster1 andCluster2 to 7861series IP Phoneusing CallForward AllFeature
UCJ10Ph2S.CUCM.G.939
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 35
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed9951 IP Phone1->Unified CM1 ->9951 IPPhone2->UnifiedCM1-> SIPTrunk->UnifiedCM2->7861 IPPhone1
Verify thatcalls comingthrough SIPTrunk withCluster1 andCluster2 to7861 series IPPhoneforwardingsuccessfully todestinationwhile usingConditionalCallForwardingFeature
Forward the callscoming throughSIP Trunk withCluster1 andCluster2 to 7861series IP PhoneusingConditionalCall ForwardingFeature
UCJ10Ph2S.CUCM.G.941
Passed7861 IP Phone1->UnifiedCM->7861 IPPhone2
Verify thatuser able topark an activecall on 7861series IPPhone andretrieve theparked callusing Featurebuttonsuccessfully
Park an activecall on 7861series IP Phoneusing assisteddirected call park
UCJ10Ph2S.CUCM.G.942
Passed7861 IPPhone->UnifiedCM1-> ICTTrunk->UnifiedCMr2->9951 IPPhone
Verify thatuser able tomake call from7861 series IPPhone to 9951IP Phonethrough ICTTrunk withCluster1 andCluster2 usingSpeed DialButton
Place call from7861 series IPPhone usingSpeed DialButton to 9951 IPPhone throughICT Trunk withCluster1 andCluster2
UCJ10Ph2S.CUCM.G.946
Test Results for Cisco Unified Communications System Release 10.0 for Japan36 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed7861 IPPhone1->UnifiedCM1-> ICTTrunk->UnifiedCM2->7861 IPPhone2->9951 IPPhone
Verify thatuser able totransfer theinter clustercall comingthrough ICTTrunk withCluster1 andCluster2 on7861 series IPPhone toanothernumbersuccessfully
Transfer the intercluster callcoming throughICT Trunk withCluster1 andCluster2 on 7861series IP Phone toanother number
UCJ10Ph2S.CUCM.G.948
Passed1.7861 IP PhoneA ->UnifiedCM-> IP phone B2.7861 IP phoneC->UnifiedCM->IP Phone A
To verify thatthe 7861phoneshandles thecall waitingtone on singlebeep amberflash linemode viceversasuccessfullywhile makingcontinuouscall
Make a call FormIP PhoneA(7861) to IPphoneB(7861),Continuouscall from IPphone C to IPphoneA and hearthe call waitingtone
UCJ10Ph2S.CUCM.G.950
Passed7861 IP Phone1->UnifiedCM1->7861 IP Phone2->UnifiedCM1->IP Phone3
To verify that7861 phonehandles thecallconferencesuccessfullyusing non7861 phones
Make call fromIP phone A to IPphoneB(7861),Makeconference to IPPhoneC(non-7861)phones
UCJ10Ph2S.CUCM.G.953
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 37
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed7861 IP Phone1-> Unified CM1-> SIP trunk ->Unified CM2 ->7861 IP Phone2-> Unified CM2-> Voicemail
Verify that acall isredirected byImmediateDivert to avoice-messagingmail box thatis specified inthevoice-messagingprofileassociatedwith thecalling party
Inter-cluster Callwith ImmediateDivert by CallingParty
UCJ10Ph2S.CUCM.G.954
PassedIP Phone1 ->Unified CM1 ->7861 IP Phone1
Verify that the7861 IP Phonehandles theDND featurein a CiscoUnified IPPhone withnon 7861 IPphonessuccessfully.
Activate Do NotDisturb featureon an IPPhone(7861),callfrom IP phone(non 7861)
UCJ10Ph2S.CUCM.G.955
Passed7861 IP Phone1-> Unified CM1-> 7861 IPPhone2
Verify theability to parka call afterlogging intoCisco UnifiedCall ManagerExtensionMobility.
Call Park afterLogging intoUnified CallManagerAssistantextensionmobility
UCJ10Ph2S.CUCM.G.956
Passed7861 IP Phone1-> Unified CM1-> 7861 IPPhone2; 7861 IPPhone3 ->Unified CM1 ->7861 IP Phone4
To verify thatthe IP phoneshandles thehold reversionsuccessfully asallocatedduration.
Hold reversionusing multiple IPphones(7861),setsingle ring,flashing amberlines
UCJ10Ph2S.CUCM.G.957
Test Results for Cisco Unified Communications System Release 10.0 for Japan38 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed7861 IPPhone->UnifiedCM1-> SIPTrunk->UnifiedCM2->Hunt Pilot
Verify that theCisco unifiedIP phone Adisplays theDN of theCisco unifiedIP phone (inhunt list)which is inother cluster
Display ofconnectedphone's DN inCisco unified IPphone A whenhunt list presentuse sign in andsign out
UCJ10Ph2S.CUCM.G.959
PassedNoVerify that theCisco unifiedIPphones(7861)handles thelineindicationsstatus displaysuccessfully
Verify lineindications statususing IP Phones(7861) in sharedline
UCJ10Ph2S.CUCM.G.960
Passed7861 IP Phone1-> Unified CM1-> 7861 IPPhone2 ->Unified CM1 ->7861 IP Phone3->Unified CM1 ->7861 IP Phone4-> Unified CM1-> 7861 IPPhone4 ->Meet-me
Verify that thePhones (7861Phone) andPhone E joinsa meet meconferencecall wherePhone A,Phone B andPhone C isalready in ameet-meconferencecall
Call made frommultiple Phone toa meet meconferencenumber to join aconference
UCJ10Ph2S.CUCM.G.962
Passed7861 IP Phone1-> Unified CM1-> 7861 IPPhone2 ->Unified CM1 ->792x Phone A
Verify that7861 phoneshandles thatcall transfersuccessfully to792x phones
Make a call from7861 phone A tophone B, Calltransfer phone Cusing 792xphones
UCJ10Ph2S.CUCM.G.966
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 39
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedDX650 - A->UnifiedCM1->DX650 - B (UnityConnection)
Verify that theDX650 - Amakes call toDX650 - B notanswer the callin DX650 - B, DX650 - Awill leave aVisual voicemail to DX650- B . Retrievethe visualvoice mail inDX650 - B bypressing hardkey and givingcredentials
DX650 - A callsto DX650 - Bretrieve the visualvoice mail inDX650 - B
UCJ10S.CUCM.G.219
PassedDX650 ->UnifiedCM -> IP Phone
Verifywhether redialcan be madefrom DX650to IP Phonesuccessfullyby pressingthe lastNumberRedial Icon onthe DX650
Redial the call onDX650 bypressing the LastNumber Redial
UCJ10S.CUCM.G.297
PassedPhone A ->Unified CM ->Phone B
Verifywhether thenewWidebandringtone fromthe phonefirmware isappliedsuccessful toCisco UnifiedConference IPPhone 8831duringintra-site calls
Checking for theWide bandringtone in CiscoUnifiedConference IPPhone 8831during intra-sitecalls
UCJ10S.CUCM.G.051
Test Results for Cisco Unified Communications System Release 10.0 for Japan40 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedIP Phone A ->Unified CM ->DX650-A ->Unified CM ->DX650-B
VerifywhetherDX650-A canpark theincoming callfrom IP Phoneand retrievethe parked callin DX650-B
DX650 can ableto park andretrieve theincoming callfrom IP Phone
UCJ10S.CUCM.G.277
PassedIP Phone A ->Unified CM ->DX650 ->UnifiedCM -> IP PhoneB
VerifywhetherDX650 shouldforward all theincoming callsto the IPPhoneDirectoryNumber inwhich the callforward all isenabled
DX650 shouldforward all theincoming calls tothe IP Phonewhen the callforward all isenabled
UCJ10S.CUCM.G.268
CSCuj93496Failed8831 -> UnifiedCM -> IP PhoneA -> Unified CM-> IP Phone B
Verifywhether theprompt isdisplayed tothe user whilemakingtransfer in8831
Check for theprompt display in8831 duringtransfer
UCJ10S.CUCM.G.614
CSCuj76467FailedIP Phone A ->Unified CM ->8831 IP Phone
Verify that theAudibleMessageWaitingIndicatorworkingproperly in8831 IPPhone.
Send a voicemailto 8831 IP Phonewith in theCluster
UCJ10S.CUCM.G.001
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 41
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
CSCum79058FailedUnified IP PhoneA -> Unified CM-> Unified IPPhone B ->Unified CM ->DX650
Verifywhether detailis showingcorrectly inDX650 inconference,when callmade fromUnified IPPhone A toUnified IPPhone B andconferencemade fromUnified IPPhone B toDX650.
Make aconference call toDX650 to checkthe details
UCJ10Ph2S.CUCM.G.060
CSCum81613FailedUnified IP PhoneA -> Unified CM-> Unified IPPhone B ->Unified CM ->Unified IP PhoneC -> Unified CM-> DX650
Verifywhether calllog is showingcorrectly inDX650, whencallmade fromUnified IPPhone A toUnified IPPhone B andcall goes toDX650, whereCFA is set inUnified IPPhone B toUnified IPPhone C andCFA is set inUnified IPPhone C toDX650
Make a call fromUnified IP PhoneA to DX650when CFA isgiven in UnifiedIP Phone B andcheck the detailsin DX650
UCJ10Ph2S.CUCM.G.061
Test Results for Cisco Unified Communications System Release 10.0 for Japan42 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
CSCum81627FailedUnified IP PhoneA -> Unified CM-> Unified IPPhone B ->Unified CM ->Unified IP PhoneC -> Unified CM-> DX650
Verifywhetherconferencecount isdecreasing inDX650, whencallmade fromUnified IPPhone A toUnified IPPhone B andmake aconferencewith UnifiedIP Phone Cand DX650,and end thecall in UnifiedIP Phone B.
Make a call fromUnified IP PhoneA to Unified IPPhone B andmake aconference withDX650
UCJ10Ph2S.CUCM.G.062
CSCum82008FailedPhone A ->Unified CM1 ->Phone B ->Unified CM1 ->Phone C
Verifywhether thedisplay on69xx phonesare properafter makingconference to69xx and alsoafter pressingthe detailssoft-key
Check for phonedisplay on 69xxphones aftermakingconference
UCJ10Ph2S.CUCM.G.411
CSCum81985FailedPhone A ->Unified CM1 ->Phone B ->Unified CM1 ->Phone C
Verifywhether theuser can ableto attend theconferencecall on 69xxphones afterpressing thedetailssoft-key
Answerconference callon 69xx phonesafter pressingdetails soft-key
UCJ10Ph2S.CUCM.G.412
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 43
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
CSCun02402FailedNAVerifywhether Phonedisplaylanguagesettings areapplied tophonesimmediatelywhen changesare made viaSelf-Care
Check whetherPhone displaylanguage settingis updated tophones viaSelf-Care
UCJ10Ph2S.CUCM.G.418
CSCun27648FailedPhone B ->Unified CM1 ->Phone A; PhoneC -> UnifiedCM1 -> Phone A
Verifywhether theRing settingsset to 7841phones areappliedcorrectlywhensettings set viaSelf-Careportal
Check whetherRing settings areapplied to 7841phones when setvia Self-Careportal
UCJ10Ph2S.CUCM.G.432
PassedUnified IP PhoneA -> Unified CM-> Unified IPPhone B->Unified CM ->Unified IP PhoneC.
Verifywhether thecall pick upgroup workswhen autopickup is set totrue in serviceparameters
Call pick upgroup in 894xPhones
UCJ10Ph2S.CUCM.SR.012
PassedWireless Phone A-> Unified CM ->WLC -> UnifiedCM -> WirelessPhone B
Verifywhether thereis two wayaudioavailable in792x Wirelessphones whenconnectedwith theWLC,when callmade between792x WirelessPhones
Call madebetween two792x Wirelessphones connectedwith WLC
UCJ10Ph2S.CUCM.SR.014
Test Results for Cisco Unified Communications System Release 10.0 for Japan44 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedNA792x IP Phoneshould registerwith CUCMthrough WLC- AP enablednetwork setup
792x IPregistered withCUCM throughwireless network
UCJ10Ph2S.CUCM.SR.330
PassedWireless Phone A-> Unified CM ->IP Phone B
Make aoutgoing callfrom 792xWireless IPPhone to otherIP phone
Make a outgoingcall using 792xwireless IP Phone
UCJ10Ph2S.CUCM.SR.331
PassedWireless Phone A-> Unified CM ->Wireless Phone B
Incoming callshould workon 792xwirelesswithout anyissues withrespect towirelessissues.
Incoming callshould work on792x wirelesswithout anyissues.
UCJ10Ph2S.CUCM.SR.332
PassedNABefore 1.4.1firmware ,there isconnectionloss during thepower savemode of 792xphone. Theissue has beenfixed in latestfirmware thatshould not bereproduced inthe latestfirmware.
792x phoneshould not loosethe connectivityduring the powersave mode.
UCJ10Ph2S.CUCM.SR.333
PassedNAAfterConnectionloss , restoringthe connectionwhen Phonehas the Signalstrength
After Connectionloss , restoringthe connectionwhen Phone hasthe Signalstrength
UCJ10Ph2S.CUCM.SR.334
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 45
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed792x IP Phone ->Unified CM 1 ->SIP Trunk ->Unified CM 2 ->IP Phone A
Verifywhether usercan view thedialed numberin the callhistory andcan able todialed thesame numberfrom history
Make a call from792x IP Phonethrough SIP trunkand check the callHistory
UCJ10S.CUCM.SR.014
PassedIP Phone A ->Unified CM 1->SIP Trunk ->Unified CM 2 ->IP Phone A
Verify that theuser can viewthe dialednumber in thePlaced callhistory of IPPhone
Make a call fromIP Phone A withSCCP load to anyother IP Phonethrough SIPTrunk and checkthe call History inthe IP Phone
UCJ10S.CUCM.SR.024
PassedIP Phone A ->Unified CM1 ->SIP Trunk ->Unified CM2 ->IP Phone B
Verify that theuser can madea call from IPPhone A inUnified CM1cluster to IPPhone B inUnified CM2cluster via SIPTrunk
Make aninter-cluster callbetween twoUnified CMclusters via SIPTrunk
UCJ10S.CUCM.SR.049
PassedIP Phone A ->Unified CM -> IPPhone B
Verifywhether the69xx phoneslog traceshowing thesame lengthfield bymaking callfrom IP phoneA to IP phoneB
Check the lengthFields in RTPpackets log tracein 69xx phonesby making callfrom 69xx IPPhone A to IPPhone B
UCJ10S.CUCM.SR.063
Test Results for Cisco Unified Communications System Release 10.0 for Japan46 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedNAVerifywhether the79xx IPphones ongoing todirectoriesthen to missedcallmenu backsoft key isused for goingpreviousmenu
Check the 79XXIP phone menuback soft key isused for goingprevious menu
UCJ10S.CUCM.SR.075
PassedIP Phone A -->Unified CM -->IP Phone B(transfer)--> IPPhone C; IPPhoneD-->Unified CM--> IP phone B
Verifywhether thatthe IP PhoneA calls to IPPhone B anddial digits fortransferringcall from IPPhone B to IPPhoneC checkthe popdisappearswhen callmade to IPPhone B fromIP Phone D
Make a call fromIP Phone A to IPPhone B andtransfer the callto IP Phone C ,make call from IPPhone D to IPPhone B whileTransferring
UCJ10S.CUCM.SR.077
PassedPhone A ->Unified CM 1 ->Phone B ->Unified CM1 ->PSTN -> UnifiedCM2 -> Phone C
Verifywhether thephone displayshows"Unknown"when callingnumber ishidden duringthe calltransfer viaPSTN
Phone Displays"Unknown"whencalling number ishidden duringInter-cluster calltransfer viaPSTN
UCJ10S.CUCM.SR.079
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 47
Test Results SummaryCisco Unified Communications Manager
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedPhone A ->Unified CM1 ->Phone B ->Unified CM1 ->PSTN -> UnifiedCM2 -> Phone C
Verifywhether thephone displayshows"Unknown"when callingnumber ishidden whenCFNA isenabled toother clustervia PSTN
Phone Displays"Unknown"whencalling number ishidden duringCFNA via PSTN
UCJ10S.CUCM.SR.082
PassedPhone A ->Unified CM1 ->PSTN -> UnifiedCM2 -> Phone B-> Unified CM2-> Phone C
Verifywhether thephone displayshows"Unknown"when callingnumber ishidden duringcall pickup viaPSTN
Phone Displays"Unknown"whencalling number ishidden duringCall Pickup viaPSTN
UCJ10S.CUCM.SR.085
PassedPhone A ->Unified CM1 ->PSTN -> UnifiedCM2 -> Phone B-> Unified CM2-> Phone C
Verifywhether thephone displayshows"Unknown"when callingnumber ishidden duringhold andresume inshared line viaPSTN
Phone Displays"Unknown"whencalling number ishidden duringhold and resumein shared line viaPSTN
UCJ10S.CUCM.SR.093
PassedNAVerify that theIP Phone Aregister withsecondaryUnified CMsuccessfully
Check the IPPhone statuswhen the PrimaryUnified CMdown
UCJ10S.CUCM.SR.105
Test Results for Cisco Unified Communications System Release 10.0 for Japan48 OL-31616-01
Test Results SummaryCisco Unified Communications Manager
Cisco TelePresence Video Communication ServerDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedNAVerify whetherTCP dump logscan be takenalong withdiagnostic logsin CiscoTelePresenceVideoCommunicationServer
TCP dump logsin Cisco VCS
UCJ10Ph2S.VCS.G.001
PassedNATo verify ifEthernetstatistics inTouch UI ofCiscoTelePresenceSystemIntegratorpackage C90 isworkingsuccessfully
Ethernetstatisticsavailable inTouch UI ofIntegratorPackage C90
UCJ10Ph2S.VCS.G.002
PassedNATo Verify ifSign-in with thevideo system'sadministratorpassword to getaccess to theAdministratormenu on Touch8" of CiscoTelePresenceSystemIntegratorPackage C90
Passwordprotection ofthe Touchadministratormenu inIntegratorPackage C90
UCJ10Ph2S.VCS.G.003
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 49
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedIntegrator PackageC90 and QuicksetC20 -> UnifiedCM->SIP Trunk ->Cisco TS 7010 ->Presentationsharing
To verify ifPresentationsource isconnectedwithin 10seconds (e.g.PC) , thepresentationwillautomaticallyresume in CiscoTelePresenceSystemIntegratorPackage C90while in videoconferenceusing Cisco TS7010
Presentationwill resumeautomaticallywithin 10seconds afterdisconnectingthe sourcewhile in videoconferenceusing Cisco TS7010
UCJ10Ph2S.VCS.G.004
PassedIntegrator PackageC90 and QuicksetC20 -> UnifiedCM -> SIPTrunk-> Cisco TS7010 ->Presentationsharing
To verify ifPresentationsource comesout of standby(e.g. PC) within10 seconds , thepresentationwillautomaticallyresume in CiscoTelePresenceIntegratorPackage C90while in videoconferenceusing CiscoTelePresenceServer 7010
Presentationsource comesout of standby(e.g. PC) whilein videoconferenceusing Cisco TS7010
UCJ10Ph2S.VCS.G.005
Test Results for Cisco Unified Communications System Release 10.0 for Japan50 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedNATo Verify ifwarningdisplayed whenthe end port is alower numberthan the startport in CiscoTelePresenceSystemIntegratorPackage C90
Warningdisplayedwhenthe end port isa lower numberthan the startport inIntegratorPackage C90
UCJ10Ph2S.VCS.G.006
PassedSX20 QuickSet ->Unified CM->QuickSet C20->Presentationsharing -> PCentered intostandby-> Comesout of standbywithin 10 seconds-> Presentationresumed
To verify ifpresentationsource enteredinto standby(PC), andcomes out ofstandby within10 seconds, thepresentationwillautomaticallybe resumed inCiscoTelePresenceSX20 QuickSet
Presentationsource enteredinto standby (e.g PC), andcomes out ofstandby within10 seconds
UCJ10Ph2S.VCS.G.007
PassedEX60-> UnifiedCM -> SX20Quick Set -> callforward all (SIPURI) -> UnifiedCM->EX90
Verify whetherthe call forwardall can be set toa SIP URInumber ofCiscoTelePresenceSystemEX90 inCiscoTelePresenceSX20Quick Setregistered inCisco UnifiedCommunicationsManager
Call forward allto SIP URI inSX20 QuickSet
UCJ10Ph2S.VCS.G.008
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 51
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX60-> UnifiedCM -> SX20Quick Set -> callforwardUnregistered(SIPURI)-> UnifiedCM->EX90
Verify whetherthe call forwardon Unregisteredcan be set to aSIP URInumber ofCiscoTelePresenceSystemEX90 inCiscoTelePresenceSX20Quick Setregistered inCisco UnifiedCommunicationsManager
Call forward onUnregistered toSIP URI inSX20 QuickSet
UCJ10Ph2S.VCS.G.009
PassedEX60 -> UnifiedCM -> SX20Quick Set ->callforwardUnregistered->Unified CM- >SIP Trunk-> CiscoVCS->EX90
Verify whetherthe call forwardon Unregisteredcan be set to aCiscoTelePresenceSystem EX90registered inCiscoTelePresenceVideoCommunicationsServer in CiscoTelePresenceSX20Quick Setregistered inCisco UnifiedCommunicationsManager
Call forward onUnregistered toEX90registered inCisco VCS inSX20 QuickSet
UCJ10Ph2S.VCS.G.010
PassedSX20 Quick Set ->Meet Meconference ID ->Unified CM->Meet MeConference
Verify whetherthe CiscoTelePresenceSX20Quick Setregistered inCisco UnifiedCommunicationsManager canjoin Meet Meconferenceusing Meet Meconference ID.
Join Meet Meconference inSX20 QuickSet
UCJ10Ph2S.VCS.G.011
Test Results for Cisco Unified Communications System Release 10.0 for Japan52 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedSX20 Quick Set ->Meet Meconference ID->Unified CM ->MCU 4510 ->Meet MeConference
Verify whetherthe CiscoTelePresenceSX20Quick Setregistered inCisco UnifiedCommunicationsManager canjoin Meet Meconferencehosted by CiscoTelePresenceMCU 4510using Meet Meconference ID.
Join MCU4510 Meet Meconference inSX20 QuickSet
UCJ10Ph2S.VCS.G.012
PassedSX20 Quick Set ->Meet MeconferenceID->Cisco VCS ->SIP Trunk ->UnifiedCM->MCU4510-> Meet MeConference
Verify whetherthe CiscoTelePresenceSX20Quick Setregistered inCiscoTelePresenceVideoCommunicationsServer can joinMeet Meconferencehosted by CiscoTelePresenceMCU 4510using Meet Meconference ID.
Join MCU4510 Meet Meconference inSX20 QuickSet registeredin Cisco VCS
UCJ10Ph2S.VCS.G.013
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 53
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedSX20 Quick Set ->Unified CM ->EX90
Verify whetherthe CiscoTelePresenceSX20Quick Setand CiscoTelePresenceSystem EX90registered inCisco UnifiedCommunicationsManager canmake a callbetween themfor longduration(1Hour)
Long durationcalls betweenSX20 QuickSet and EX90
UCJ10Ph2S.VCS.G.014
PassedSX20 Quick Set ->Cisco VCS ->EX90
Verify whetherthe CiscoTelePresenceSX20Quick Setand CiscoTelePresenceSystem EX90registered inCiscoTelePresenceVideoCommunicationServer canmake a callbetween themfor longduration(1Hour)
Long durationcalls betweenSX20 QuickSet and EX90registered inCisco VCS
UCJ10Ph2S.VCS.G.015
Test Results for Cisco Unified Communications System Release 10.0 for Japan54 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedSX20 Quick Set ->Unified CM->6961
Verify whetherthe CiscoTelePresenceSX20Quick Setand CiscoUnified IPphone 6961registered inCisco UnifiedCommunicationsManager canmake a callbetween themfor longduration(1Hour)
Long durationaudio callsbetween SX20Quick Set and6961
UCJ10Ph2S.VCS.G.016
PassedTX9000->UnifiedCM -> EX90->PresentationSharing ->MovePresentation toMain Screen
Verify whetherthe presentationcontent can bemoved to mainscreen in CiscoTelePresenceTX9000registered inCisco UnifiedCommunicationsManager whenin a call withCiscoTelePresenceSystem EX90registered inCisco UnifiedCommunicationsManager
Layout Controlin TX9000
UCJ10Ph2S.VCS.G.017
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 55
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedTX9000 ->UnifiedCM Cluster-1->SIP Trunk ->Unified BorderElement-> SIPTrunk-> UnifiedCM Cluster-2->EX90->PresentationSharing-> MovePresentation toMain Screen
Verify whetherthe presentationcontent can bemoved to mainscreen in CiscoTelePresenceTX9000registered inCisco UnifiedCommunicationsManager whenin a call withCiscoTelePresenceSystem EX90registered inCisco UnifiedCommunicationsManager viaCisco UnifiedBorder Element
Layout Controlin TX9000 viaUnified BorderElement
UCJ10Ph2S.VCS.G.018
PassedTX9000 ->UnifiedCM-> EX60->PresentationSharing ->Automatic sharingdisable
Verify whetherthe automaticsharing ofpresentation canbe disabled inCLI of CiscoTelePresenceTX9000registered inCisco UnifiedCommunicationsManager
Disable theAutomaticSharing ofPresentation inTX9000registered inUnified CM
UCJ10Ph2S.VCS.G.019
Test Results for Cisco Unified Communications System Release 10.0 for Japan56 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX60 -> UnifiedCM -> TX9000 ->call forwardall(SIP URI) ->Unified CM ->EX90
Verify whetherthe call forwardall can be set toa SIP URInumber ofCiscoTelePresenceSystemEX90 inCiscoTelePresenceTX9000registered inCisco UnifiedCommunicationsManager
Call forward allto SIP URI inTX9000
UCJ10Ph2S.VCS.G.020
PassedEX60 -> UnifiedCM -> TX9000->call forwardall->Unified CM->voicemail
Verify whetherthe call forwardall can be set toa voicemailnumber of inCiscoTelePresenceTX9000registered inCisco UnifiedCommunicationsManager
Call forward allto voicemail inTX9000
UCJ10Ph2S.VCS.G.021
PassedEX60 -> UnifiedCM -> TX9000->call forwardUnregistered(SIPURI)-> UnifiedCM -> EX90
Verify whetherthe call forwardon Unregisteredcan be set to aSIP URInumber ofCiscoTelePresenceSystemEX90 inCiscoTelePresenceTX9000registered inCisco UnifiedCommunicationsManager
Call forward onUnregistered toSIP URI inTX9000
UCJ10Ph2S.VCS.G.022
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 57
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX60-> UnifiedCM -> TX9000->call forwardUnregistered->Unified CM->voicemail
Verify whetherthe call forwardon Unregisteredcan be set to avoicemail inCiscoTelePresenceTX9000registered inCisco UnifiedCommunicationsManager
Call forward onUnregistered tovoicemail inTX9000
UCJ10Ph2S.VCS.G.023
PassedTX9000-> MeetMe conferenceID-> UnifiedCM-> Meet MeConference
Verify whetherthe CiscoTelePresenceTX9000registered inCisco UnifiedCommunicationsManager canjoin Meet Meconferenceusing Meet Meconference ID.
Join Meet Meconference inTX9000
UCJ10Ph2S.VCS.G.024
PassedTX9000-> MeetMe conferenceID-> UnifiedCM-> MCU4510->Meet MeConference
Verify whetherthe CiscoTelePresenceTX9000registered inCisco UnifiedCommunicationsManager canjoin Meet Meconferencehosted by CiscoTelePresenceMCU 4510using Meet Meconference ID.
Join MCU4510 Meet Meconference inTX9000
UCJ10Ph2S.VCS.G.025
Test Results for Cisco Unified Communications System Release 10.0 for Japan58 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedTX9000 ->UnifiedCM-> EX90
Verify whetherthe CiscoTelePresenceTX9000 andCiscoTelePresenceSystem EX90registered inCisco UnifiedCommunicationsManager canmake a callbetween themfor longduration(1Hour)
Long durationcalls betweenTX9000 andEX90
UCJ10Ph2S.VCS.G.026
PassedTX9000 ->UnifiedCM -> SIPTrunk-> CiscoVCS-> EX90
Verify whetherthe CiscoTelePresenceTX9000registered inCisco UnifiedCommunicationsManager canmake a call toCiscoTelePresenceSystem EX90registered inCiscoTelePresenceVideoCommunicationServer and stayin the call for 1hour
Long durationcalls betweenTX9000 andEX90registered inCisco VCS
UCJ10Ph2S.VCS.G.027
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 59
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedTX9000-> UnifiedCM->6961
Verify whetherthe CiscoTelePresenceTX9000 andCisco UnifiedIP phone 6961registered inCisco UnifiedCommunicationsManager canmake a callbetween themfor longduration(1Hour)
Long durationcalls betweenTX9000 and6961
UCJ10Ph2S.VCS.G.028
Passed500-32->UnifiedCM->QuickSetC20(EM User)
To Verify ifvideo callestablishedbetween CiscoTelePresenceSystem 500-32and CiscoTelePresenceSystemQuickSet C20registered withCisco UnifiedCommunicationsManager whereQuickSet C20login withExtensionMobility User
Video Callbetween500-32 andQuickSet C20login with EMUser
UCJ10Ph2S.VCS.G.029
Test Results for Cisco Unified Communications System Release 10.0 for Japan60 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed500-32-> UnifiedCM(Cluster 1) ->SIP Trunk->UnifiedCM(Cluster 2) ->QuickSet C20(EMUser)
To Verify ifinter cluster callestablishedbetween CiscoTelePresenceSystem 500-32and CiscoTelePresenceSystemQuickSet C20registered withCisco UnifiedCommunicationsManager whereQuickSet C20login withExtensionMobility User
Inter ClusterCall between500-32 andQuickSet C20login with EMUser
UCJ10Ph2S.VCS.G.030
Passed500-32-> UnifiedCM(Cluster 1) ->SIP Trunk->UnifiedCM(Cluster 2) ->QuickSet C20(EMUser) -> Hold /Resume
To Verify ifuser is able tohold and resumethe call betweenCiscoTelePresenceSystem 500-32and CiscoTelePresenceSystemQuickSet C20registered withCisco UnifiedCommunicationsManager whereQuickSet C20login withExtensionMobility User
Hold andresume theInter Clustervideo callbetween500-32 andQuickSet C20login with EMUser
UCJ10Ph2S.VCS.G.031
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 61
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed500-32 -> UnifiedCM(Cluster 1) ->SIP Trunk->UnifiedCM(Cluster 2)->QuickSet C20(EMUser) ->PresentationSharing
To Verify ifuser is able toshare thepresentationbetween CiscoTelePresenceSystem 500-32and CiscoTelePresenceSystemQuickSet C20registered withCisco UnifiedCommunicationsManager whereQuickSet C20login withExtensionMobility User
PresentationSharingbetween500-32 andQuickSet C20login with EMUser
UCJ10Ph2S.VCS.G.032
Passed500-32 -> UnifiedCM -> IntegratorPackage C90 ->QuickSet C20 (EMUser)->Conference
To verify ifvideoconferenceestablishedbetween CiscoTelePresenceSystem 500-32, CiscoTelePresenceSystemIntegratorPackage C90and CiscoTelePresenceSystemQuickSetC20(login withExtensionMobility)registered withCisco UnifiedCommunicationsManager
Conferencebetween500-32 ,QuickSet C20(login with EMUser) andIntegratorPackage C90
UCJ10Ph2S.VCS.G.033
Test Results for Cisco Unified Communications System Release 10.0 for Japan62 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed500-32-> UnifiedCM->IntegratorPackage C90 ->QuickSet C20 (EMUser)->Conference ->Hold / Resume
To verify ifhold and resumethe conferencebetween CiscoTelePresenceSystem 500-32, CiscoTelePresenceSystemIntegratorPackage C90and CiscoTelePresenceSystemQuickSetC20(login withExtensionMobility)registered withCisco UnifiedCommunicationsManager
Hold andresume theconferencebetween500-32 ,QuickSet C20(login with EMUser) andIntegratorPackage C90
UCJ10Ph2S.VCS.G.034
Passed500-32-> UnifiedCM-> IntegratorPackage C90->QuickSet C20 (EMUser)->Conference->Presentation Share
To verify if useris able to sharethe presentationbetween CiscoTelePresenceSystem 500-32, CiscoTelePresenceSystemIntegratorPackage C90and CiscoTelePresenceSystemQuickSetC20(login withExtensionMobility)registered withCisco UnifiedCommunicationsManager
PresentationSharingbetween500-32 ,QuickSet C20(login with EMUser) andIntegratorPackage C90
UCJ10Ph2S.VCS.G.035
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 63
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedQuickSet C20->Unified CM->500-32-> CFA->SX20 QuickSet
To Verify ifvideo callestablishedbetween CiscoTelePresenceSystem 500-32and CiscoTelePresenceSystemQuickSet C20registered withCisco UnifiedCommunicationsManager and setcall forward allin 500-32 toCiscoTelePresenceSX20 QuickSet
Call ForwardAll in 500-32registered withUnified CM
UCJ10Ph2S.VCS.G.036
PassedQuickSet C20->UnifiedCM(Cluster 1)->500-32 ->CFA->UnifiedCM(Cluster1)->SIPTrunk->UnifiedCM(Cluster 2) ->SX20 QuickSet
To Verify ifinter clustervideo callbetween CiscoTelePresenceSystem 500-32and CiscoTelePresenceSystemQuickSet C20registered withCisco UnifiedCommunicationsManager and setcall forward allin 500-32 toCiscoTelePresenceSX20 QuickSet
Inter clustercall forward allin 500-32registered withUnified CM
UCJ10Ph2S.VCS.G.037
Test Results for Cisco Unified Communications System Release 10.0 for Japan64 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedQuickSet C20->Unified CM(Cluster 1)-> SIPTrunk->UnifiedCM (Cluster 2)->500-32 ->CFA-> voicemail
To Verify ifinter clustervideo callbetween CiscoTelePresenceSystem 500-32registered withCisco UnifiedCommunicationsManager(Cluster 2) andCiscoTelePresenceSystemQuickSet C20registered withCisco UnifiedCommunicationsManager(Cluster1) and set callforward all in500-32 tovoicemail
Call forward allto voicemail in500-32registered withUnified CM
UCJ10Ph2S.VCS.G.038
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 65
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedQuickSet C20 (EMUser)-> UnifiedCM ->500-32 ->CFA-> SX20QuickSet
To Verify ifvideo callestablishedbetween CiscoTelePresenceSystem 500-32and CiscoTelePresenceSystemQuickSet C20registered withCisco UnifiedCommunicationsManager and setcall forward allin 500-32 toCiscoTelePresenceSX20 QuickSetwhere CiscoTelePresenceSystemQuickSet C20login withExtensionMobility User
Call ForwardAll in 500-32to SX20Quickset
UCJ10Ph2S.VCS.G.039
Passed500-32->UnifiedCM(Cluster1)->SIPTrunk->UnifiedCM(Cluster 2)->DX650
To Verify ifinter cluster callestablishedbetween CiscoTelePresenceSystem 500-32and CiscoDesktopCollaborationExperienceDX650registered withCisco UnifiedCommunicationsManager
Inter clusterCall between500-32 andDX650
UCJ10Ph2S.VCS.G.040
Test Results for Cisco Unified Communications System Release 10.0 for Japan66 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed500-32->UnifiedCM(Cluster 1) ->SIP Trunk ->UnifiedCM(Cluster 2) ->DX650 -> Hold /Resume
To Verify ifhold and resumethe call betweenCiscoTelePresenceSystem 500-32and CiscoDesktopCollaborationExperienceDX650registered withCisco UnifiedCommunicationsManager
Hold andresume the callbetween500-32 andDX650
UCJ10Ph2S.VCS.G.041
Passed500-32->UnifiedCM(Cluster1)->SIP Trunk->UnifiedCM(Cluster 2) ->DX650 ->PresentationSharing
To Verify ifpresentationsharing betweenCiscoTelePresenceSystem 500-32and CiscoDesktopCollaborationExperienceDX650registered withCisco UnifiedCommunicationsManager
PresentationSharingbetween500-32 andDX650
UCJ10Ph2S.VCS.G.042
Passed500-32 ->UnifiedCM->8831
To Verify ifaudio callestablishedbetween CiscoTelePresenceSystem 500-32and CiscoUnified IPConferenceStation 8831registered withCisco UnifiedCommunicationsManager
Audio callbetween500-32 and8831
UCJ10Ph2S.VCS.G.043
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 67
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed500-32-> UnifiedCM->8831->Hold/Resume
To Verify ifhold and resumethe audio callbetween CiscoTelePresenceSystem 500-32and CiscoUnified IPConferencestation 8831registered withCisco UnifiedCommunicationsManager
Hold andresume theaudio callbetween500-32 and8831
UCJ10Ph2S.VCS.G.044
Passed500-32-> UnifiedCM -> 8831->SX20 QuickSet ->Audio Conference
To Verify ifaudioconferencebetween CiscoTelePresenceSystem 500-32, Cisco UnifiedIP Conferencestation 8831 andCiscoTelePresenceSystem SX20QuickSetregistered withCisco UnifiedCommunicationsManager
AudioConference in500-32 initiatedby 8831
UCJ10Ph2S.VCS.G.045
Test Results for Cisco Unified Communications System Release 10.0 for Japan68 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
CSCum74055FailedEX90-> CiscoVCS->EX90(1) ->Transfer -> CiscoVCS->SIPTrunk-> UnifiedCM->EX60
Verify whetherthe call can betransferred fromCiscoTelePresenceSystem EX90registered inCiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceSystem EX60registered inCisco UnifiedCommunicationsManager
Transfer a callfrom EX90registered inCisco VCS toEX60registered inUnified CM
UCJ10Ph2S.VCS.G.046
CSCun12798FailedEX90-> UnifiedCM->SIP Trunk->Cisco VCS->SX20 Quick Set
Verify whetherJapanesedisplay ID setfor CiscoTelePresenceSystem EX90registered inCisco UnifiedCommunicationsManager isreflected inCiscoTelePresenceSX20Quick Setregistered inCiscoTelePresenceVideoCommunicationServer
Japanesedisplay ID inSX20 QuickSet registeredin Cisco VCS
UCJ10Ph2S.VCS.G.049
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 69
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
CSCun28040FailedSX20Quick Set(64Kbps) ->UnifiedCM -> EX90
Verify whetherSX20Quick Setregistered inCisco UnifiedCommunicationsManagertransmits audiowhen thebandwidth is setas 64 Kbps forthe call to CiscoTelepresenceSystem EX90
SX20 QuickSet transmitsaudio aftersetting defaultcall rate as 64kbps
UCJ10Ph2S.VCS.G.050
CSCun08178FailedEX60-> CiscoVCS-> EX90 ;EX90-> transfer->C90
To Verify thatuser can able totransfer a callfrom CiscoTelePresenceSystemEX60 toCiscoTelePresenceSystemIntegratorPackage C90
Make a callbetween EX60and EX90 ,transfer a callfrom EX60 toC90
UCJ10Ph2S.VCS.G.051
CSCul13054FailedNATo verify thatuser can able toenable extendedlogging optionin SX20Quickset WebGUI
EnableExtendedLogging inSX20 QuicksetWeb-GUI
UCJ10S.VCS.G.096
Test Results for Cisco Unified Communications System Release 10.0 for Japan70 OL-31616-01
Test Results SummaryCisco TelePresence Video Communication Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
CSCul01896FailedNATo verify if"Sign insuccessful "message isdisplayed in theTouch UI ofCiscoTelePresenceSystemQuickSet C20after login withExtensionMobility UserwhereExtensionMobility userlocale is set toJapaneselanguage
"Sign inSuccessful "messagedisplayed inQuickSet C20for EM User
UCJ10S.VCS.G.101
Cisco Jabber for iPhone and iPadDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedCJI --> UnifiedCM --> CJiPad-->Unified CM ->CJA
Verify thatJabber foriPhone shouldbe inconferencewith otherJabber forAndroid andJabber for iPad
Make an intracluster call fromJabber foriPhone to Jabberfor iPad andconference tothe Jabber forAndroid user byusing of email id(URI dialing).
UCJ10Ph2S.CJI.G.008
PassedCJI-->UnifiedCM-->CJW
Verify thatJabber foriPhone shouldcall to Jabberfor Windowsby using ofURI dialing.
Make an intracluster call fromJabber foriPhone to Jabberfor Windows inSearch by usingof email id (URIDialing)
UCJ10Ph2S.CJI.G.010
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 71
Test Results SummaryCisco Jabber for iPhone and iPad
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCJI --> UnifiedCM1--> SIPTrunk--> UnifiedCM2 --> CJW.
Verify thatJabber foriPhone shoulddisplay thesecure key iconafter connectedto Jabber forWindows
Make an intercluster call fromJabber foriPhone to JabberforWindows viaSIP Trunk.
UCJ10Ph2S.CJI.G.002
PassedCJI-->UnifiedCM1-->SIPTrunk-->UnifiedCM2-->9971 IPPhone
Verify thatJabber foriPhone shoulddisplay thesecure key iconafter connectedto 9971 IPPhone.
Make an intercluster call fromJabber foriPhone to 9971IP Phone viaUnified BorderElement throughSIP Trunk.
UCJ10Ph2S.CJI.G.004
PassedCJ iPad -->Unified CM -->CJI -->UnifiedCM -->CJA.
Verify thatJabber foriPhone shouldTransfer thecall to Jabberfor Android byusing of emailid(URI dialing)
Make an intracluster call fromJabber for iPadto Jabber foriPhone andTransfer the callfrom Jabber foriPhone to Jabberfor Android userby using ofemail id (URIdialing).
UCJ10Ph2S.CJI.G.007
PassedCJA --> UnifiedCM --> CJI -->Unified CM -->CJW
Verify thatJabber foriPhone shouldmakeconference toJabber forWindows byusing of emailid(URI dialing)and conferencewith Jabber forAndroid andWindows.
Make an intracluster call fromJabber forAndroid toJabber foriPhone andmake conferencefrom Jabber foriPhone to Jabberfor Windows byusing of emailid(URI dialing).
UCJ10Ph2S.CJI.G.011
Test Results for Cisco Unified Communications System Release 10.0 for Japan72 OL-31616-01
Test Results SummaryCisco Jabber for iPhone and iPad
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCJI-->UnifiedCM1-->ICTTrunk--> UnifiedCM2 - > CJW.
Verify thatJabber foriPhone shoulddisplay thesecure key iconafter connectedto the Jabberfor Windows
Make an intercluster call fromJabber foriPhone to JabberforWindows viaICT Trunk.
UCJ10Ph2S.CJI.G.005
PassedCJW --> UnifiedCM1 --> SIPTrunk -> CUBE-> SIP trunk -->Unified CM2 -->CJI --> UnifiedCM2 --> CJW.
Verify thatJabber foriPhone shouldconferencewith 9971 IPPhone andJabber forWindows andsecure key iconshould displayin Jabber foriPhone.
Make an intercluster call fromJabber forWindows toJabber foriPhone andmake conferencefrom Jabber foriPhone to 9971IP Phone viaUnified BorderElement throughSIP Trunk.
UCJ10Ph2S.CJI.G.006
PassedCJI ---> UnifiedCM ---> CJA
Verify thatJabber foriPhone shouldsearch thecontacts fromLDAP whentransferring thecall to Jabberfor Android.
Jabber foriPhone couldn'table to searchthe LDAP whentransferring thecall.
UCJ10Ph2S.CJI.SR.002
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCJiPad --> UnifiedCM1 --> SIP Trunk--> Unified CM2--> 9971 IP Phone--> Unified CM2 ->CJA
Verify thatJabber for iPadshould displaythe secure keyicon afterConferencewith other 9971IP Phone andJabber forAndroid.
Make an intercluster callfrom Jabber foriPad to 9971 IPPhone andConference thecall to Jabberfor Android viaSIP Trunk.
UCJ10Ph2S.CJiPad.G.002
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 73
Test Results SummaryCisco Jabber for iPhone and iPad
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCJiPad-->UnifiedCM1-->ICTTrunk-->CUBE-->ICTTrunk-->UnifiedCM2-->9971 IPPhone-->UnifiedCM1 -> QuicksetC20
Verify thatJabber for iPadshould displaythe secure Keyicon afterConferencewith other 9971IP Phone andQuickset C20.
Make an intercluster callfrom Jabber foriPad to 9971 IPPhone andConference thecall to QuicksetC20 via UnifiedBorder Elementthrough ICTTrunk
UCJ10Ph2S.CJiPad.G.005
PassedCJI--> Unified CM-->CJiPad-->UnifiedCM -> CJA
Verify thatJabber for iPadshould transferthe call toJabber forAndroid byusing of emailid(URIDialing)
Make an intracluster callfrom Jabber foriPhone toJabber For iPadby using ofemail id (URIDialing) andTransfer thecall from Jabberfor iPad toJabber forAndroid byusing of emailid.
UCJ10Ph2S.CJiPad.G.011
PassedCJiPad-->UnifiedCM-->CJA
Verify thatJabber for iPadshould call toJabber forAndroid byusing of emailid (URIDialing)
Make an intracluster callfrom Jabber foriPad to Jabberfor Android byusing email id(URI Dialing)in Favorites
UCJ10Ph2S.CJiPad.G.012
PassedCJiPad-->UnifiedCM-->9951 IPPhone
Verify thatJabber for iPadshould displaythe secure keyicon afterconnected to9971 IP Phone.
Make an intracluster callfrom Jabber foriPad to IPPhone 9951.
UCJ10Ph2S.CJiPad.G.003
Test Results for Cisco Unified Communications System Release 10.0 for Japan74 OL-31616-01
Test Results SummaryCisco Jabber for iPhone and iPad
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCJiPad --> UnifiedCM1 --> SIP Trunk--> CUBE --> ICTTrunk--> UnifiedCM2 --> 9971 IPPhone ---> UnifiedCM2 -> QuicksetC20.
Verify thatJabber for iPadshould displaythe secure keyicon aftertransferred thecall to QuicksetC20.
Make an intercluster callfrom Jabber foriPad to 9971 IPPhone andTransfer thecall from 9971IP Phone toQuickset C20via UnifiedBorder Elementthrough ICTTrunk
UCJ10Ph2S.CJiPad.G.006
PassedCJiPad-->UnifiedCM-->CJA
Verify thatJabber for iPadshould displaythe secure keyicon afterconnected toJabber forAndroid.
Make anintra-clustercall from Jabberfor iPad toJabber forAndroid byusing of emailid (URIdialing).
UCJ10Ph2S.CJiPad.G.001
PassedCJiPad-->UnifiedCM-->6941 IPPhone.
Verify thatJabber for iPadshould call to6941 IP Phoneand shouldwork two-waysaudio calls afterupgrade IOS 7.
Make an intracluster callfrom Jabber foriPad to 6941 IPPhone afterupgrade IOS 7on iPad.
UCJ10Ph2S.CJiPad.SR.001
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 75
Test Results SummaryCisco Jabber for iPhone and iPad
Cisco Jabber for AndroidDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedCJA-->UnifiedCM-->CJI.
Verify thatJabber forAndroidshould call toJabber foriPhone user byusing of emailid.
Make an intracluster call fromJabber forAndroid toJabber foriPhone by usingof email id(URIdialing) in callhistory.
UCJ10Ph2S.CJA.G.004
PassedCJA-->UnifiedCM-->CJ iPad.
Verify thatJabber forAndroidshould call toJabber for iPaduser by usingof email id.
Make an intracluster call fromJabber forAndroid toJabber for iPadby using ofemail id (URIdialing) in chatwindow.
UCJ10Ph2S.CJA.G.005
PassedCJA-->UnifiedCM1-->SIPTrunk--> UnifiedCM2-->IP Phone8831--> UnifiedCM2-->CJ iPad.
Verify thatJabber forAndroidshould displaythe secure keyicon aftertransferred thecall to jabberfor iPad
Make an intercluster call fromJabber forAndroid to 8831IP Phone andtransfer the callto jabber foriPad from 8831IP Phone viaSIP Trunk
UCJ10Ph2S.CJA.G.016
PassedCJA--> UnifiedCM1-->SIPTrunk-->CUBE-->SIPTrunk--> UnifiedCM2--> CJiPad--> UnifiedCM2 -->CJI
Verify thatJabber forAndroidshould displaythe secure keyicon aftertransferred thecall to Jabberfor iPhone
Make an intercluster call fromJabber forAndroid toJabber for iPadand transfer thecall to Jabberfor iPhone fromjabber for iPadvia UnifiedBorder Elementthrough SIPTrunk
UCJ10Ph2S.CJA.G.018
Test Results for Cisco Unified Communications System Release 10.0 for Japan76 OL-31616-01
Test Results SummaryCisco Jabber for Android
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCJI--> UnifiedCM--> CJA -->Unified CM -->CJiPad
Verify thatJabber forAndroidshould transferthe call toJabber for iPadby using ofemail id(URIdialing).
Make an intracluster call fromJabber foriPhone toJabber forAndroid byusing of emailid(URI dialing)in ContactProfile andTransfer the callfrom Jabber forAndroid toJabber for iPad.
UCJ10Ph2S.CJA.G.008
PassedCJA-->UnifiedCM-->CJI
Verify thatJabber forAndroidshould displaythe secure keyicon afterconnected tothe Jabber foriPhone
Make anintra-cluster callfrom Jabber forAndroid toJabber foriPhone
UCJ10Ph2S.CJA.G.015
PassedCJA--> UnifiedCM1-->SIPTrunk--> UnifiedCM2 - > CJ iPad
Verify thatJabber forAndroidshould displaythe secure keyicon afterconnected tothe Jabber foriPad
Make aninter-cluster callfrom Jabber forAndroid toJabber for iPadvia SIP Trunk
UCJ10Ph2S.CJA.G.017
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 77
Test Results SummaryCisco Jabber for Android
Cisco Jabber for WindowsDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedCJW A ->Unified CM1 ->SIP trunk ->Unified CM 2 ->Phone A
Verify that afterentering numberin dock and thenby pressing"enter" checkwhether callgets establishedsuccessfullyfrom CJW
By enteringnumber indock and press"enter" formaking callfrom CJW
UCJ10Ph2S.CJW.G.022
PassedCJW A ->Unified CM ->CJW B
Verify that callmade fromCisco Jabber forWindows A toCisco Jabber forWindows B bydialing the URIsuccessfully
Initiate callfrom CJW Ato CJW Busing URIdialing
UCJ10Ph2S.CJW.G.160
PassedCJW A ->Unified CM ->CJW B ->Unified CM ->Phone C
Verify thatCisco Jabber forWindows Amakes call tocisco Jabber forWindows Busing URIdialing andJabber forWindows Btransfers the callsuccessfully
CJW Breceivesincoming callfrom CJW Ausing URIdialing andCJW Btransfers thecall
UCJ10Ph2S.CJW.G.161
PassedCJW A ->Unified CM ->CJW B ->Unified CM ->Phone C
Verify that callforward set inCJW Bsuccessfully andCisco Jabber forWindows Amakes call toCisco Jabber forWindows Busing URIdialing and IPphone C attendsforwarded call
Call forward inCJW B andCJW A makescall to CJW Busing URIdialing and IPphone Creceives call
UCJ10Ph2S.CJW.G.162
Test Results for Cisco Unified Communications System Release 10.0 for Japan78 OL-31616-01
Test Results SummaryCisco Jabber for Windows
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedNAVerify thatCisco Jabber forWindows B andC receives theGroup chatinvitenotificationduring groupchatsuccessfully
Group chatinvite in CJW
UCJ10Ph2S.CJW.G.026
PassedNAVerify thatCisco Jabber forWindows Bwhich is in chatwith CJW Areceives theGroup chatinvitenotificationfrom CiscoJabber forWindows Aduring groupchatsuccessfully
Group chatinvite sent touser which isalready in Chat
UCJ10Ph2S.CJW.G.028
PassedNAVerify that thechat content ofcisco Jabber forWindows aresavedsuccessfully
Chat historysave in CiscoJabber forWindows
UCJ10Ph2S.CJW.G.031
PassedNAVerify that"Sign in asdifferent user"prompt appearswhen user 2tries to login tothe CJW oncethe user 1 getssign out fromCJW
"Sign in asdifferent user"prompt whileloggingdifferent userspresent withincluster
UCJ10Ph2S.CJW.G.032
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 79
Test Results SummaryCisco Jabber for Windows
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedNAVerify theprompt "Sign inas differentuser" appearswhen multipleusers login tothe Cisco Jabberfor Windowsafter user 1 getssign out of CJW
Multiple userlogin to CJWand checkprompt status
UCJ10Ph2S.CJW.G.034
PassedPhone A ->Unified CM ->CJW A ; CJW A-> Unified CM1-> SIP Trunk ->Unified CM2 ->CJW B
Verify that CJWA in UnifiedCM 2successfullytransfers the callto CJW B inUnified CM 1via SIP trunk
Call Transferfrom CJW Ato CJW B inUnified CM 1via SIP Trunk
UCJ10Ph2S.CJW.SR.002
PassedNAVerify thatCisco Jabber forWindowssuccessfullytransfer a file toother CiscoJabber forWindowsthrough chat
Transfer of filebetween twoCisco Jabberfor Windows
UCJ10Ph2S.CJW.SR.007
PassedCJW A ->Unified CM ->CJW B ; CJW B->Unified CM ->CJW C
Verify thatvideo call isworking in CJWand video isdisplayed inboth CJWAandC successfullyafter completetransfermade byCJW B
Validatedisplay ofvideo aftercompletetransfer inCJW
UCJ10Ph2S.CJW.SR.003
Test Results for Cisco Unified Communications System Release 10.0 for Japan80 OL-31616-01
Test Results SummaryCisco Jabber for Windows
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCJW A ->Unified CM ->CJW B ; CJW B-> UnifiedCM1-> H.323 ->CUBE -> H.323-> Unified CM2-> CJW C
Verify thatvideo call isestablishedsuccessfullybetweenCJWAinUnified CM2and CJW C inUnified CM 1when completetransfermade byCJW B viaCUBE
Validate videocallestablishmentbetweenCJW'swhen call istransferred viaCUBE
UCJ10Ph2S.CJW.SR.005
PassedNAVerify that inJabber forWindows thereis no change inconnectionsettings after therestart of PC
Connectionsettings inCisco Jabberfor Windows
UCJ10Ph2S.CJW.SR.009
PassedCJW A--->Cluster ---> CJWB
Verify thatJabber remainsrunning inWindows 7Machine checkin TaskManager
Jabber remainsrunning insystem ifJabber exit inWindows 7
UCJ10S.CJW.SR.011
PassedCJWA--->Cluster--->CJW B
Verify thatJabber remainsrunning inWindows 8Machine checkin TaskManager.
Jabber remainsrunning insystem ifJabber exit inWindows 8Task Manager
UCJ10S.CJW.SR.015
PassedCJWA--->Cluster --->CJW B
Verify thatjabber remainsrunning inwindows 8Machine checkin Status bar.
Jabber remainsrunning insystem ifJabber exit inWindows 8Status Bar
UCJ10S.CJW.SR.016
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 81
Test Results SummaryCisco Jabber for Windows
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCJW -> CTI ->Unified IP Phone-> UnityConnection
Verify thatJabber forWindowsinvoke tovoicemail indesk phonemode afterassigning thevoicemailaccount to theuser
Make Call toVoicemail inDesk phonemode
UCJ10S.CJW.SR.018
PassedUnified IP PhoneA-> Cluster ->CJW -> UnityConnection
Verify thatJabber forWindowsforwards theincoming call tovoicemail
Make a callfrom UnifiedIP Phone 9971to Jabber forWindowswhen callforward allnumber is setto Voicemail
UCJ10S.CJW.SR.021
PassedNAVerify that Callvoicemailbutton in Jabberfor Windowsshould not be inenabled mode ifno voicemailprofile isassigned to theuser.
Call Voicemailbutton shouldnot beclickable if novoicemailprofile isassigned to theuser.
UCJ10S.CJW.SR.022
Test Results for Cisco Unified Communications System Release 10.0 for Japan82 OL-31616-01
Test Results SummaryCisco Jabber for Windows
Cisco Jabber for MacDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedJabber forMac ->Unified CM1->SIPtrunk->UnifiedCM2-> Jabberfor iPhone
Verify thatCisco Jabberfor Mac Clientcan able to doVideo Call toCisco Jabberfor iPhone viaSIP trunk indifferentcluster
Video Callfrom Jabberfor Mac toJabber foriPhone via SIPTrunk
UCJ10Ph2S.CJM.G.001
PassedJabber forMac ->Unified CM1 ->Jabber for iPhone
Verify thatJabber for Macdo InstantMessagingwith Jabber foriPhone in samecluster andafter logoutfrom Jabber forMac, Chatmessagesshould not bethere in thehistory
Chat historyuntil logoutwhen Jabberfor Mac doInstantMessagingwith Jabber foriPhone in samecluster
UCJ10Ph2S.CJM.G.002
PassedJabber for Mac->Unified CM1->SIP trunk->Unified CM2 ->Jabber for iPhone
Verify thatwhen Jabberfor Mac doInstantmessagingwithJabber foriPhone indifferentcluster andclose the chatbox, Chatmessagesshould be therein the history
Chat historywhen Jabberfor Mac closethe chat boxafter InstantMessagingwith Jabber foriPhone indifferentcluster
UCJ10Ph2S.CJM.G.003
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 83
Test Results SummaryCisco Jabber for Mac
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedJabber forMac ->Unified CM1->PSTN-> UnifiedCM2-> Jabberfor iPhone
Verify thatSelf-Videowindow can beenabled/disabledin callpreferenceswhen Jabberfor Mac callconnectedwithJabber foriPhone viaPSTN
Self-Videowindow can beenabled/disabledin callpreferenceswhen Jabberfor Mac callconnectedwithJabber foriPhone viaPSTN
UCJ10Ph2S.CJM.G.004
PassedJabber forMac ->Unified CM1->Jabber Clients
Verify thatwhen Jabberfor Mac doGroup chatwith otherclient in samecluster, Groupchat invitationdoes notcontain chattopic
Jabber forMacdo Group chatin same cluster
UCJ10Ph2S.CJM.G.005
PassedJabber forMac ->Unified CM1->SIP trunk->Unified CM2->Jabber Clients
Verify that inJabber for MacChat history,User can ableto input onename to filterout the chathistory with theUser indifferentcluster.
In Jabber forMac Chathistory, inputone name tofilter out thechat historywith the Userin differentcluster.
UCJ10Ph2S.CJM.G.006
PassedJabber for iPhone-> UnifiedCM1-> ICT trunk-> Unified CM2->Jabber for Mac
Verify thatCisco Jabberfor Mac Clientstarts calls withVideo whenCisco Jabberfor iPhonemake call viaICT trunk indifferentcluster
Always StartCalls withVideo inJabber forMacwhen Jabberfor iPhone callvia ICT Trunk
UCJ10Ph2S.CJM.G.007
Test Results for Cisco Unified Communications System Release 10.0 for Japan84 OL-31616-01
Test Results SummaryCisco Jabber for Mac
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedJabber forMac->UnifiedCM1 -> JabberforiPhone->UnifiedCM1->Jabber forWindows
Verify thatJabber for Maccan do VideoConferencingto Jabber foriPhone andJabber forWindows insame cluster
VideoConferencingfrom Jabberfor Mac toJabber foriPhone andJabber forWindows insame cluster
UCJ10Ph2S.CJM.G.008
Cisco Unified Border ElementDefectsStatusCall Component
FlowDescriptionTitleLogical ID
Passed8831 -> UnifiedCM1-> H.323 ->CUBE -> H.323 ->Unified CM2 ->Phone B
Verify that8831 IP phonesuccessfullymakes call to IPphone B viaCUBE throughH.323 to H.323interworking
Call made from8831 IP phoneto IP phone Bvia CUBEthrough H.323to H.323interworking
UCJ10Ph2S.CUBE.G.120
PassedPhoneA ->UnifiedCM1 -> H.323 ->CUBE -> H.323 ->Unified CM2 ->Phone B -> UnifiedCM2 -> Phone C
Verify that IPphone A makescall via CUBEthrough H.323to H.323interworking toIP phone B andIP phone Banswers andparks the callsuccessfullyand IP phone Cretrieves theparked call
Retrieval ofparked call byIP phone Cwhen callinitiated viaCUBE
UCJ10Ph2S.CUBE.G.121
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 85
Test Results SummaryCisco Unified Border Element
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedPhoneA ->UnifiedCM1 -> H.323 ->CUBE -> H.323 ->Unified CM2 ->Hunt pilot number
Verify that IPphone A makescall via CUBEthrough H.323to H.323interworking tohunt pilotnumber and IPphone B presentin hunt groupanswers the callsuccessfully
Call made toHunt pilotnumber viaCUBE
UCJ10Ph2S.CUBE.G.122
PassedPhoneA ->UnifiedCM1 -> H.323 ->CUBE -> H.323 ->Unified CM2 ->Phone B -> PhoneC -> Phone D
Verify that IPphone A makescall to IP phoneB via CUBEthrough H.323to H.323interworkingand IP phone Bdoes Multipletransfer with IPphone C and Dwithin UnifiedCM 2successfully
Call made fromIP phone A to IPphone B viaCUBE andmultipletransfers madewithin UnifiedCM 2
UCJ10Ph2S.CUBE.G.123
Passed7841 -> UnifiedCM1 -> H.323 ->CUBE -> H.323 ->Unified CM2 ->Phone B
Verify that7841 IP phonemakes call to IPphone B viaCUBE usingRedial option
Redial by 7841IP phone viaCUBE
UCJ10Ph2S.CUBE.G.124
Test Results for Cisco Unified Communications System Release 10.0 for Japan86 OL-31616-01
Test Results SummaryCisco Unified Border Element
Cisco Unified Survivable Remote Site TelephonyDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedPhone A ->Unified SRST ->Hunt groupsequential number
Verify that huntgroupsequentialworkssuccessfullywhen callsmade withinunified SRST
Make call tohunt groupsequential inUnified SRST
UCJ10Ph2S.SRST.G.104
Passed7841 -> UnifiedSRST -> Phone B-> Phone C
Verify that7841 makescall to IP phoneB and IP phoneB transfers thecall to IP phoneC successfully
Call madefrom 7841 IPphone to otherIP phone inSRST modeand consulttransfer byother IP phone
UCJ10Ph2S.SRST.G.210
PassedPhoneA->UnifiedSRST -> 7841 ->Phone B
Verify that7841 IP phoneattends theincoming calland 7841transfers thecall to other IPphone bypressing"Redial" optionin 7841 IPphone
Transferringcall to other IPphone usingRedial option
UCJ10Ph2S.SRST.G.213
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 87
Test Results SummaryCisco Unified Survivable Remote Site Telephony
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedPhoneA->UnifiedSRST -> 7841 ;Phone B ->Unified SRST ->7841
Verify that callforward setsuccessfully in7841 IP phoneand initiallymake call fromIP phone A to7841 IP phoneand check callgets forwardedsuccessfullyand then makecall from IPphone B to7841 and checkcall forward in7841 IP Phone
Call forward in7841 IP phoneand make callsfrom two IPphones andcheck callforward in7841 IP Phone
UCJ10Ph2S.SRST.G.215
PassedPhoneA->UnifiedSRST -> Phone B-> Phone C
Verify that callgets transferredsuccessfully inIP phone usingSIP load
Call transferusing IPphones withSIP load inSRST mode
UCJ10Ph2S.SRST.G.216
Cisco Unity ConnectionDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM-> Unified IPPhone B -> UnityConnection ->Exchange Server
To check theuser's mail boxin corporatee-mail whetherthe userreceived quotanotificationmail.
E-Mail QuotaNotificationmail for theuser when theyexceeds thequota limit
UCJ10Ph2S.CUC.G.001
Test Results for Cisco Unified Communications System Release 10.0 for Japan88 OL-31616-01
Test Results SummaryCisco Unity Connection
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM-> Unified IPPhone B -> UnityConnection ->Exchange Server
To check theuser's mail boxin corporatemailboxwhether the userreceivedcustomizedquotanotificationmail
Set thecustomizedquotanotificationmail
UCJ10Ph2S.CUC.G.007
PassedUnity Connection-> ExchangeServer
To check theuser's corporatemailboxwhether the userreceived quotanotificationmailevery 10minutes
Set the quotanotificationtask to run asevery 10minutes andcheck forquotanotificationmail
UCJ10Ph2S.CUC.G.008
PassedUnity Connection-> ExchangeServer
To check thetimestamp inquotanotificationmailin user'scorporatemailbox
Schedule aquotanotificationtask at 00:00time and checktimestamp ofquotanotificationmail
UCJ10Ph2S.CUC.G.011
PassedUnity Connection-> ExchangeServer
To check theuser's corporatemailbox forquotanotificationmailwith customizedsubject
Set theCustomizedsubject inquotanotificationmail
UCJ10Ph2S.CUC.G.012
PassedUnified IP PhoneA -> Unified CM-> Unified IPPhone B -> UnityConnection ->Exchange Server
To verify theuser is able tosee voicemail asan attachment inHTMLIntelligentnotification
Enablevoicemail asattachments inHTMLIntelligentNotification atglobal level
UCJ10Ph2S.CUC.G.017
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 89
Test Results SummaryCisco Unity Connection
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA -> Unified CM-> Unified IPPhone B -> UnityConnection ->Exchange Server
To verify theuser is able tosee voicemail asan attachmentHTMLnotification
Allowvoicemail asattachments inHTMLIntelligentNotification atspecific userlevel
UCJ10Ph2S.CUC.G.018
PassedUnified IP PhoneA -> Unified CM->Unified IPPhone B -> UnityConnection
To enableannouncemessage statuswhen replyingto a messagethrough TUI
Enableannouncemessage statuswhen replyingto a messagethrough TUI
UCJ10Ph2S.CUC.G.022
PassedUnified IP PhoneA -> Unified CM->Unified IPPhone B -> UnityConnection
To disableannouncemessage statuswhen replyingto a messagethrough TUI
Disableannouncemessageplaying statusto users whilereplyingthrough TUI
UCJ10Ph2S.CUC.G.024
PassedUnified IP PhoneA -> Unified CM->Unified IPPhone B -> UnityConnection
To retrieve avoicemailthrough TUIafter the userreceivedvoicemail fromuser in a samesite and hearspasswordexpirationwarning prompt
Enable the TUIPIN ResetBehavior anduser asked toenter the timeinterval duringconditionalwarningprompt will beplayed
UCJ10Ph2S.CUC.G.027
PassedUnified IP PhoneA->UnifiedCM->Unified IP PhoneB-> UnityConnection ->Exchange Server
To check thetask executionresults andcheck thenumber ofnotificationmailsent to user whoexceeds theconfiguredquota limit
Checkwhetherquotanotificationmail sent withHighimportance
UCJ10Ph2S.CUC.G.014
Test Results for Cisco Unified Communications System Release 10.0 for Japan90 OL-31616-01
Test Results SummaryCisco Unity Connection
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedUnified IP PhoneA->UnifiedCM->Unified IP PhoneB-> UnityConnection ->Exchange Server
To checkwhether the userreceived thequotanotificationmailin the localespecifictemplate
Set Localespecific alerttemplate forquotanotificationmail
UCJ10Ph2S.CUC.G.015
PassedUnified IP PhoneA -> Unified CM->Unified IPPhone B -> UnityConnection
To retrieve avoicemailthrough TUIafter the userreceivedvoicemail fromuser in a samesite and hearspasswordexpirationwarning prompt
Retrieve avoicemailthrough TUIafter the userreceivedvoicemail fromuser in a samesite and hearspasswordexpirationwarningprompt
UCJ10Ph2S.CUC.G.026
PassedUnified IP PhoneA -> Unified CM->Unified IPPhone B -> UnityConnection
To disable theTUI PINbehavior andchecks fordefault behaviorof warningprompt
Disable theTUI PINbehavior andchecks fordefaultbehavior ofwarningprompt
UCJ10Ph2S.CUC.G.028
PassedNAVerify thatVMPilotnumber ispopulated inCTI LineDevice
VMPilotnumberpopulated inCTI LineDevice
UCJ10S.CUC.SR.001
Cisco Unified Attendant ConsoleDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedNACompatibilitytesting of CUACclient in Windows8
CUAC clienttested withWindows 8OS
UCJ10PH2S.CUAC.G.003
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 91
Test Results SummaryCisco Unified Attendant Console
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedNACompatibilitytesting of CUACserver in Windows2012
CUAC Servertested withWindows2012
UCJ10PH2S.CUAC.G.004
PassedNACompatibilitytesting of CUACserver in Windows2012 with SQL2012 installed in it.
CUAC ServerwithWindows2012 is testedwith SQL2012
UCJ10PH2S.CUAC.G.005
Cisco UC Integration™ for Microsoft LyncDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedCisco UCIntegration™ forMicrosoft Lync1->Unified CM->Unified IP Phone
Make a Callfrom Cisco UCIntegration™for MicrosoftLync clientfrom DockedWindow afterpositioning ittop of thescreen.
Make a callfrom DockedWindow afterpositioning it totop left side ortop right side
UCJ10Ph2S.CUCI.G.001
PassedUnified IPPhone->UnifiedCM ->Cisco UCIntegration™ forMicrosoft Lync
To verifywhether theuser is able tosee the missedcall indicator inCisco UCIntegration™for MicrosoftLync dockedwindow
Check missedcall indicator inCisco UCIntegration™ forMicrosoft Lyncdocked window
UCJ10Ph2S.CUCI.G.005
Test Results for Cisco Unified Communications System Release 10.0 for Japan92 OL-31616-01
Test Results SummaryCisco UC Integration™ for Microsoft Lync
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCisco UCIntegration™ forMicrosoft Lync1->Unified CM->Cisco UCIntegration™ forMicrosoft Lync 2
To check thecall history tabin hub Windowof Cisco UCIntegration™for MicrosoftLync forreceived,missed, anddialed calls
Check the callhistory tab inHub Window ofCisco UCIntegration™ forMicrosoft Lync
UCJ10Ph2S.CUCI.G.007
PassedCisco UCIntegration™ forMicrosoft Lync1->Unified CM->Cisco UCIntegration™ forMicrosoft Lync 2 -> Lync Server
To check theMicrosoft Lyncpresence statuswhenCiscoUCIntegration™for MicrosoftLync currentlyactive in a call
Check theMicrosoft Lyncpresence statuswhen Cisco UCIntegration™ forMicrosoft Lyncis on call
UCJ10Ph2S.CUCI.G.008
PassedUnified IP Phone1->Unified CM->Cisco UCIntegration™ forMicrosoft Lync
To verifywhether theuser is able tomake a call toboth deskphone andsoftphone(Cisco UCIntegration™for MicrosoftLync )
Make a call toCisco UCIntegration™ forMicrosoft Lyncwhen softphoneand desk phonehas different DN
UCJ10Ph2S.CUCI.G.012
PassedUnified IP Phone->Unified CM 1 ->SIP Trunk ->Unified CM 2 ->Cisco UCIntegration™ forMicrosoft Lync
To verifywhether theuser is able tomake a call toanother site andverify the callhistory detailssuch as dateand time.
Check the dateand time detailsin call historyafter making thecall to anothersite whichrouted viaSessionInitiationProtocol Trunk
UCJ10Ph2S.CUCI.G.013
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 93
Test Results SummaryCisco UC Integration™ for Microsoft Lync
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCisco UCIntegration™ forMicrosoft Lync1->Unified CM1->SIP trunk->CUBE->SIPtrunk -> UnifiedCM 2 -> Cisco UCIntegration™ forMicrosoft Lync 2
Make anInter-clustercall to CiscoUCIntegration™for MicrosoftLync clientfrom DockedWindow afterpositioning ittop of thescreen.
Make anInter-clustervideo call routedvia CiscoUnified BorderElement fromDockedWindow afterpositioning it
UCJ10Ph2S.CUCI.G.002
PassedUnified IP Phone1->Unified CM ->Cisco UCIntegration™ forMicrosoft Lync 1-> Unified IPPhone 2
To verifywhether theuser is able tomake a call toCisco UCIntegration™for MicrosoftLync when itshares the sameDN.
Make a call toCisco UCIntegration™ forMicrosoft Lyncwhen anotherUnified IPPhone sharedthe same DN
UCJ10Ph2S.CUCI.G.011
Cisco Unified Communications Manager ExpressDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedPhone A ->UnifiedCM -> hunt pilotnumber; Phone B-> Unified CME ->SIP trunk ->Unified CM ->Phone E
Verify that IPphone Bpresent in huntgroup transfersthe call to IPphone E inUnified CMviaSIP trunk
Transferringthe call to IPphone inUnified CMfrom the IPphone presentin Hunt groupin UnifiedCME
UCJ10Ph2S.CME.G.125
Test Results for Cisco Unified Communications System Release 10.0 for Japan94 OL-31616-01
Test Results SummaryCisco Unified Communications Manager Express
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedPhone A-> UnifiedCME -> Phone B
Verify thatdifferentpickup-groupsis created inCME and thecall getsestablishedsuccessfullywhen call madewithin UnifiedCME
Create differentpickup-groupsin CME andcheck bymaking callswithin UnifiedCME
UCJ10Ph2S.CME.G.121
PassedPhone A ->UnifiedCME -> Hunt pilotnumber
Verify that huntgroupsequentialworkssuccessfullywhen callsmade withinCME
Hunt groupsequential inUnified CME
UCJ10Ph2S.CME.G.124
PassedPhone A ->UnifiedCME -> Phone B-> Phone C
Verify IP phoneB parks theincoming calland IP phone Cretrieves theparked callsuccessfully
Check call parkin UnifiedCME
UCJ10Ph2S.CME.G.153
Passed8961 -> UnifiedCME -> Phone A
Verify that callis madesuccessfullyfrom 8961 IPphone to IPphone B inUnified CME
Call made from8961 IP phoneto IP phone B(SCCP load) inUnified CME
UCJ10Ph2S.CME.G.157
PassedPhone A ->UnifiedCME -> 8961
Verify that DoNot Disturbworkssuccessfully in8961 IP phonein UnifiedCME
DND in 8961IP phone inUnified CME
UCJ10Ph2S.CME.G.158
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 95
Test Results SummaryCisco Unified Communications Manager Express
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedPhone A ->UnifiedCME -> 8961 ->Phone B
Verify that callgets parkedsuccessfully inIP phone 8961and check IPphone Bretrieves theparked call
Call park in8961 IP phonein UnifiedCMEand checkcall gets parkedin IP phonewith SIP load
UCJ10Ph2S.CME.G.159
Cisco TelePresence Multipoint Control UnitDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedEX90-> UnifiedCM-> SIP Trunk-> MCU 4510EX60->UnifiedCM-> SIP Trunk-> MCU 4510EX60-> transfer->UnifiedCM->SX20 QuickSet
Verify whetherthe guestparticipant(CiscoTelePresenceSystemEX60) ina conferencemanaged byCiscoTelePresenceMCU can betransferred toanother endpointCiscoTelePresenceSX20 Quick Set
Transfer aguestparticipant
UCJ10Ph2S.MCU.G.001
PassedEX90 -> CiscoVCS ->SIPTrunk-> UnifiedCM->SIPTrunk ->MCU 4510(Conference 1)EX60->CiscoVCS->SIPTrunk->UnifiedCM->SIPTrunk->MCU 4510(Conference 2)EX60-> MovefromConference 1to Conference 2
Verify whetherthe guestparticipant canbe moved fromone conferenceto another inCiscoTelePresenceMCU 4510
Move a guestparticipantfrom oneconference toanother usingMCU 4510Web-GUI
UCJ10Ph2S.MCU.G.002
Test Results for Cisco Unified Communications System Release 10.0 for Japan96 OL-31616-01
Test Results SummaryCisco TelePresence Multipoint Control Unit
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX90 -> UnifiedCM -> SIP Trunk-> MCU 45108945->UnifiedCM->SIPTrunk->MCU4510 8945->park-> UnifiedCM-> EX60->retrieve
Verify whetherthe CiscoTelePresenceSystem EX60registered inCisco UnifiedCommunicationsManager canretrieve a parkedCiscoTelePresenceMCU 4510conference call
Retrieve aparked MCU4510conference call
UCJ10Ph2S.MCU.G.003
PassedEX90 ->UnifiedCM -> SIP Trunk-> MCU 4510EX60 ->UnifiedCM-> SIP Trunk-> MCU 4510SX20Quick Set ->Unified CM->SIPTrunk-> MCU4510-> audioconference
Verify whetherthe CiscoTelePresenceSX20 Quick Setregistered inCisco UnifiedCommunicationsManager isadded as anaudio call inCiscoTelePresenceMCU 4510 afterthe video portusage getsexhausted
Audio callafter videoport usage getsexhausted
UCJ10Ph2S.MCU.G.004
PassedEX90 -> CiscoVCS -> SIPTrunk-> UnifiedCM->SIP Trunk->MCU 4510 ->conference notinitiated
Verify whetherthe CiscoTelePresenceSystem EX90registered inCiscoTelePresenceVideoCommunicationServer is unableto join the CiscoTelePresenceMCU 4510conference afterthe conference islocked
After lockingconferenceEX90 shouldnot be able tojoin theconference
UCJ10Ph2S.MCU.G.005
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 97
Test Results SummaryCisco TelePresence Multipoint Control Unit
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedNAVerify whetherthe layout ofCiscoTelePresenceSystem EX90registered inCisco UnifiedCommunicationsManager can bechanged duringa conference inCiscoTelePresenceMCU 4510 WebGUI
Change thelayout ofEX90 in theMCU 4510
UCJ10Ph2S.MCU.G.006
PassedEX90 -> UnifiedCM -> SIP Trunk-> MCU 4510->chairperson IDEX60 -> UnifiedCM->SIP Trunk->MCU 4510 ->guest ID SX20Quick Set->Unified CM->SIPTrunk-> MCU4510->guest ID
Verify whetherthe guestparticipant isdisconnectedfrom theconference afterthe chairpersonexits theconference inCiscoTelePresenceMCU 4510
Guestparticipantsshoulddisconnectafterchairpersonexits theconference
UCJ10Ph2S.MCU.G.007
PassedSX20 Quick Set ,EX90 , EX60 ->Unified CM->SIPTrunk ->MCU4510->ScheduledConference
Verify whetherthepre-configuredSIP endpointsregistered inCisco UnifiedCommunicationsManager enterthe scheduledconference inCiscoTelePresenceMCU 4510
ScheduledConferenceUsing MCU4510
UCJ10Ph2S.MCU.G.008
Test Results for Cisco Unified Communications System Release 10.0 for Japan98 OL-31616-01
Test Results SummaryCisco TelePresence Multipoint Control Unit
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedSX20 Quick Set ,EX90 ,EX60(H323) ->Cisco VCS->MCU4510->ScheduledConference
Verify whetherthepre-configuredH323 endpointsregistered inCiscoTelePresenceVideoCommunicationServer enter thescheduledconference inCiscoTelePresenceMCU 4510
ScheduledConferencewith H323endpointsUsing MCU4510
UCJ10Ph2S.MCU.G.009
PassedSX20 Quick Set->CiscoVCS->MCU 4510
Verify whetheran endpoint canbe added to aconference usingSIP registrar inCiscoTelePresenceMCU 4510
Add anendpoint to theconferenceusing SIPRegistrar
UCJ10Ph2S.MCU.G.010
PassedNAVerify whetheran conferencevisibility can bechanged toprivate in CiscoTelePresenceMCU 4510
Set theconferencevisibility toprivate
UCJ10Ph2S.MCU.G.011
PassedSX20 Quick Set(H323) ->CiscoVCS->MCU4510
Verify whetheran conferencecan be initiatedby H323endpoint(CiscoTelePresenceSystem EX90)registered inCiscoTelePresenceVideoCommunicationServer in CiscoTelePresenceMCU 4510
Conferencecall for H323endpointsusing SIPregistrar
UCJ10Ph2S.MCU.G.012
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 99
Test Results SummaryCisco TelePresence Multipoint Control Unit
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedMCU 4510->SIPTrunk->UnifiedCM->EX90-> callforward all->UnifiedCM->EX60
Verify whetherthe conferencecall using CiscoTelePresenceMCU 4510 canbe initiated toCiscoTelePresenceSystem EX90which has setcall forward allto another CiscoTelePresenceSystem EX60
Conferencecall to a EX90endpointwhich has setcall forward all
UCJ10Ph2S.MCU.G.013
Passed8945-> UnifiedCM -> EX90MCU 4510 -> SIPTrunk->UnifiedCM->EX90-> callforwardbusy->UnifiedCM-> SIPTrunk->CiscoVCS-> EX60
Verify whetherthe conferencecall using CiscoTelePresenceMCU 4510 canbe initiated toCiscoTelePresenceSystem EX90which has setcall forwardbusy to anotherCiscoTelePresenceSystem EX60registered inCiscoTelePresenceVideoCommunicationServer
Conferencecall to a EX90endpointwhich has setcall forwardbusy to CiscoVCS registeredEX60
UCJ10Ph2S.MCU.G.014
Test Results for Cisco Unified Communications System Release 10.0 for Japan100 OL-31616-01
Test Results SummaryCisco TelePresence Multipoint Control Unit
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedMCU 4510 -> SIPTrunk-> UnifiedCM-> EX90->callforwardUnregistered->UnifiedCM->EX60
Verify whetherthe conferencecall using CiscoTelePresenceMCU 4510 canbe initiated toCiscoTelePresenceSystem EX90which has setcall forwardUnregistered toanother CiscoTelePresenceSystem EX60
Conferencecall to a EX90endpointwhich has setcall forwardUnregistered
UCJ10Ph2S.MCU.G.015
PassedMCU 4510-> SIPTrunk-> UnifiedCM->EX90-> callforwardUnregistered->Unified CM-> SIPTrunk-> CiscoVCS-> EX60
Verify whetherthe conferencecall using CiscoTelePresenceMCU 4510 canbe initiated toCiscoTelePresenceSystem EX90which has setcall forwardUnregistered toanother CiscoTelePresenceSystem EX60registered inCiscoTelePresenceVideoCommunicationServer
Conferencecall to a EX90endpointwhich has setcall forwardUnregisteredto Cisco VCSregisteredEX60
UCJ10Ph2S.MCU.G.016
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 101
Test Results SummaryCisco TelePresence Multipoint Control Unit
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedSX20Quick Set ->EX90 -> EX60->Cisco VCS ->SIPTrunk->UnifiedCM->SIP Trunk->MCU 4510
Verify whetherthe CiscoTelePresenceSX20Quick Set,CiscoTelepresenceSystem EX90and CiscoTelePresenceSystem EX60registered inCiscoTelePresenceVideoCommunicationsServer can jointhe conferencecall by CiscoTelePresenceMCU 4510 andstay in theconference for 1hour
Long durationconferencecalls usingMCU 4510
UCJ10Ph2S.MCU.G.017
PassedSX20Quick Set ->EX90-> EX60->Cisco VCS->MCU 4510
Verify whetherthe CiscoTelePresenceSX20Quick Set,CiscoTelepresenceSystem EX90and CiscoTelePresenceSystem EX60registered inCiscoTelePresenceVideoCommunicationsServer can jointhe conferencecall by CiscoTelePresenceMCU 4510 byusing SIPregistrar for longduration ( 1 hour)
Long durationconferencecalls usingMCU 4510SIP registrar
UCJ10Ph2S.MCU.G.018
Test Results for Cisco Unified Communications System Release 10.0 for Japan102 OL-31616-01
Test Results SummaryCisco TelePresence Multipoint Control Unit
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed8945 -> UnifiedCM->EX90MCU4510 ->SIP Trunk-> Unified CM->EX90-> callforward busy->Unified CM->EX60
Verify whetherthe conferencecall using CiscoTelePresenceMCU 4510 canbe initiated toCiscoTelePresenceSystem EX90which has setcall forwardbusy to anotherCiscoTelePresenceSystem EX60
Conferencecall to a EX90endpointwhich has setcall forwardbusy
UCJ10Ph2S.MCU.G.019
Cisco TelePresence Management SuiteDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedCisco TMS ->Cisco MCU->SIP Trunk ->Unified CM->EX90-> EX60
Verifywhether thescheduledconference forCiscoTelePresenceSystem EX90and CiscoTelePresenceSystem EX60registered inCisco UnifiedCommunicationsManager canbe scheduledsuccessfullyusing CiscoTelePresenceManagementSuite
Initiate ascheduledconferenceusing CiscoTMS forUnified CMregisteredendpoints
UCJ10Ph2S.TMS.G.001
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 103
Test Results SummaryCisco TelePresence Management Suite
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCisco TMS ->CiscoMCU->CiscoVCS-> EX90->EX60
Verifywhether thescheduledconference forCiscoTelePresenceSystem EX90and CiscoTelePresenceSystem EX60registered inCisco VideoCommunicationServer can bescheduledsuccessfullyusing CiscoTelePresenceManagementSuite
Initiate ascheduledconferenceusing CiscoTMS for CiscoVCS registeredendpoints
UCJ10Ph2S.TMS.G.002
PassedCisco TMS->Mute onJoin->CiscoMCU-> UnifiedCM-> EX90 ->EX60
Verifywhether muteon join forvideo andaudio forscheduledconference forCiscoTelePresenceSystem EX90and CiscoTelePresenceSystem EX60registered inCisco UnifiedCommunicationsManager canbe scheduledsuccessfullyusing CiscoTelePresenceManagementSuite
Mute on joinvideo and audiofor a scheduledconferenceusing CiscoTMS forUnified CMregisteredendpoints
UCJ10Ph2S.TMS.G.003
Test Results for Cisco Unified Communications System Release 10.0 for Japan104 OL-31616-01
Test Results SummaryCisco TelePresence Management Suite
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCisco TMS->Mute onJoin->CiscoMCU-> CiscoVCS->EX90->EX60
Verifywhether muteon join forvideo andaudio forscheduledconference forCiscoTelePresenceSystem EX90and CiscoTelePresenceSystem EX60registered inregistered inCisco VideoCommunicationServer can bescheduledsuccessfullyusing CiscoTelePresenceManagementSuite
Mute on joinvideo and audiofor a scheduledconferenceusing CiscoTMS for CiscoVCS registeredendpoints
UCJ10Ph2S.TMS.G.004
PassedCisco TMS->Audio->CiscoMCU->UnifiedCM->EX90->EX60
Verifywhether thescheduledaudioconference forCiscoTelePresenceSystem EX90and CiscoTelePresenceSystem EX60registered inCisco UnifiedCommunicationsManager canbe scheduledsuccessfullyusing CiscoTelePresenceManagementSuite
Initiate ascheduled audioconferenceusing CiscoTMS forUnified CMregisteredendpoints
UCJ10Ph2S.TMS.G.005
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 105
Test Results SummaryCisco TelePresence Management Suite
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCisco TMS->Audio->CiscoMCU->CiscoVCS->EX90->EX60
Verifywhether thescheduledaudioconference forCiscoTelePresenceSystem EX90and CiscoTelePresenceSystem EX60registered inCisco VideoCommunicationServer can bescheduledsuccessfullyusing CiscoTelePresenceManagementSuite
Initiate ascheduled audioconferenceusing CiscoTMS for CiscoVCS registeredendpoints
UCJ10Ph2S.TMS.G.006
PassedCisco TMS->CiscoMCU->CiscoVCS->EX90->EX60
Verifywhethermessage canbe sent to alltheparticipants inthe scheduledconferenceusingConferenceControl Centerin CiscoTelePresencemanagementSuite
Send messageto conferenceparticipantsduringscheduledconference
UCJ10Ph2S.TMS.G.007
Test Results for Cisco Unified Communications System Release 10.0 for Japan106 OL-31616-01
Test Results SummaryCisco TelePresence Management Suite
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedCisco TMS->CiscoMCU->CiscoVCS->EX90
Verifywhether theparticipant canbe added inthe scheduledconferenceusingConferenceControl Centerin CiscoTelePresencemanagementSuite
Add aparticipant tothe conferenceusingConferenceControl Center
UCJ10Ph2S.TMS.G.008
Cisco TelePresence ConductorDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedEX60 -> EX90 ->SX20 Quick Set->Cisco VCS -> TPC-> MCU 5310
Verify the usercan able toinitiate thevideoconferencebetween CiscoTelePresenceVideoCommunicationServerregisteredVideo endpoints usingmultiway withCiscoTelepresenceconductor
VideoconferencebetweenCisco VCSregisteredVideo endpoints usingmultiwaywithConductor
UCJ10Ph2S.TPC.G.001
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 107
Test Results SummaryCisco TelePresence Conductor
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed9971 -> UnifiedCM -> EX90(EM)-> CFA ->Unified CM -> SIPTrunk ->Telepresenceconductor ->Conference
Verify the usercan able toforward the callfrom ExtensionMobilityenabled CiscoTelePresenceSystem EX90to rendezvousconference
Forward allfrom EMenabledEX90to rendezvousconference
UCJ10Ph2S.TPC.G.002
Passed9971 -> UnifiedCM -> EX60 ->CFA -> UnifiedCM -> SIP Trunk-> Telepresenceconductor ->Conference
Verify the usercan able toforward the callfrom CiscoUnifiedCommunicationsManagerregistered CiscoTelePresenceSystem EX60to rendezvousconference
Forward allfrom UnifiedCMregisteredEX60 torendezvousconference
UCJ10Ph2S.TPC.G.003
PassedEX60 -> EX90 ->SX20 Quick Set ->Unified CM -> SIPTrunk ->Telepresenceconductor ->Telepresence Server-> conference
Verify the usercan able toinitiate the longdurationconferencebetween CiscoUnifiedCommunicationsManagerregistered videoend pointsusing virtualCiscoTelepresenceServer viaCiscoTelepresenceconductor
Initiate thelong durationconferencebetweenUnified CMregisteredvideo endpoints usingTelepresenceServer viaConductor
UCJ10Ph2S.TPC.G.004
Test Results for Cisco Unified Communications System Release 10.0 for Japan108 OL-31616-01
Test Results SummaryCisco TelePresence Conductor
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedQuick Set C20 andIntegrator PackageC90 (shared line) ;Quick Set C20 ->9971 -> UnifiedCM -> SIP Trunk-> Telepresenceconductor->Conference
Verify the usercan able toinitiate therendezvousconferencefrom CiscoUnifiedCommunicationsManagerregisteredshared line Cseries endpoints andCisco UnifiedIP Phone 9971
Initiate therendezvousconferencefrom sharedline C seriesendpoints
UCJ10Ph2S.TPC.G.005
PassedQuick Set C20 andIntegrator PackageC90 (shared line) ;Quick Set C20 ->EX90 -> UnifiedCM -> SIP Trunk-> Telepresenceconductor ->rendezvousconference ->Integrator PackageC90 -> Call barge
Verify the usercan able toinitiate therendezvousconferencefrom CiscoUnifiedCommunicationsManagerregisteredshared lineCiscoTelePresenceSystem QuickSet C20 thenbarge the sameconference callon CiscoTelePresenceSystemIntegratorPackage C90
Initiate therendezvousconferencefrom sharedlineQuick SetC20 thenbarge thesameconferencecall onIntegratorPackage C90
UCJ10Ph2S.TPC.G.006
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 109
Test Results SummaryCisco TelePresence Conductor
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX90 -> Quick SetC20 ->IntegratorPackage C90 ->Cisco VCS ->Telepresenceconductor -> CiscoTelePresence Server-> lecture typeconference
Verify the usercan initiate andmaintain thelecture typeLong durationvideoconferencebetween CiscoTelePresenceVideoCommunicationServerregistered videoend pointsusing CiscoTelepresenceServer viaCiscoTelepresenceconductor
Lecture typelong durationvideoconferencebetweenCisco VCSregisteredvideo endpoints usingTelepresenceServer viaTelepresenceconductor
UCJ10Ph2S.TPC.G.007
Passed6941-> 7961 ->6921 -> UnifiedCM -> SIP Trunk-> Telepresenceconductor -> CiscoTelepresence Server-> audio conference
Verify the usercan initiate andmaintain thelong durationaudioconferencebetween CiscoUnifiedCommunicationsManagerregistered CiscoUnified IPPhone usingCiscoTelepresenceServer viaCiscoTelepresenceconductor
Long durationaudioconferencebetweenUnified CMregisteredUnified IPPhones usingTelepresenceServer viaTelepresenceconductor
UCJ10Ph2S.TPC.G.008
Test Results for Cisco Unified Communications System Release 10.0 for Japan110 OL-31616-01
Test Results SummaryCisco TelePresence Conductor
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX90 ->IntegratorPackage C90 ->Quick Set C20 ->Cisco VCS ->Telepresenceconductor ->Telepresence Server-> conference
Verify the usercan able tomaintain thelong durationconferencebetween CiscoTelePresenceVideoCommunicationServerregistered videoend pointsusing CiscoTelepresenceServer viaCiscoTelepresenceconductor
Long durationconferencebetweenCisco VCSregisteredvideo endpoints usingTelepresenceServer viaTelepresenceconductor
UCJ10Ph2S.TPC.G.009
PassedSX20 Quick Set ->EX60 -> EX90 ->Cisco VCS ->Telepresenceconductor -> CiscoTS 7010 ->conference
Verify the usercan initiate thelong durationconferencewithmodifiedbandwidthbetween CiscoTelePresenceVideoCommunicationServerregistered videoend pointsusing CiscoTelepresenceServer 7010 viaCiscoTelepresenceconductor
Long durationconferencewithmodifiedbandwidthbetweenCisco VCSregisteredvideo endpoints usingCisco TS7010 viaTelepresenceconductor
UCJ10Ph2S.TPC.G.010
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 111
Test Results SummaryCisco TelePresence Conductor
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedIntegrator PackageC90 -> Unified CM-> IntegratorPackage C90 ( EMLogin) -> Quick SetC20 -> Unified CM-> SIP Trunk ->Telepresenceconductor ->Mediaresource ->rendezvousconference
Verify the usercan able toinitiate a longdurationrendezvousvideoconferencebetween CiscoUnifiedCommunicationsManagerregisteredExtensionMobilityenabledIntegratorPackage C90and Quick SetC20
Long durationrendezvousconferencebetweenUnified CMregistered EMenabledVideo Endpoints
UCJ10Ph2S.TPC.G.011
PassedIntegrator PackageC90 -> Unified CM-> IntegratorPackage C90 ( EMLogin) -> Quick SetC20 -> Unified CM-> SIP Trunk ->Telepresenceconductor ->Mediaresource ->rendezvousconference
Verify the usercan able tomake arendezvousvideoconferencebetween CiscoUnifiedCommunicationsManagerregisteredExtensionMobilityenabledIntegratorPackage C90and Quick SetC20
Make arendezvousconferencebetween EMenabledVideo Endpointsregistered inUnified CM
UCJ10Ph2S.TPC.G.012
Test Results for Cisco Unified Communications System Release 10.0 for Japan112 OL-31616-01
Test Results SummaryCisco TelePresence Conductor
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed8941 -> UnifiedCM -> 8941(EMLogin ) -> EX60 ->9971 -> UnifiedCM -> SIP Trunk-> Telepresenceconductor ->Mediaresource ->rendezvousconference
Verify the usercan able tomake an adhocconferencebetween CiscoUnifiedCommunicationsManagerregisteredExtensionMobilityenabled CiscoUnified IPPhone 8941
Make aconferencebetween EMenabledVideo Endpointsregistered inUnified CM
UCJ10Ph2S.TPC.G.013
PassedQuick Set C20 ->Unified CM ->Integrator PackageC90 -> shared line; 8941 -> 8945 ->Unified CM -> SIPTrunk ->Telepresenceconductor ->mediaresource ->rendezvousconference ; 8941-> Park->UnifiedCM -> Quick SetC20 -> Retrieve ->Integrator PackageC90 ->call barge
Verify the usercan able to parkthe rendezvousconference callfrom CiscoUnifiedCommunicationsManagerregistered CiscoUnified IPPhone 8941 andthen retrieve iton shared lineCiscoTelePresenceSystem QuickSet C20
Park therendezvousconferencecall from8941 andretrieve it onshared lineQuick SetC20
UCJ10Ph2S.TPC.G.014
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 113
Test Results SummaryCisco TelePresence Conductor
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedQuick Set C20 ->Integrator PackageC90 -> shared line;8941 -> 8945 ->Unified CM -> SIPTrunk ->Telepresenceconductor -> mediaresource ->rendezvousconference; 8945 ->Park->Unified CM->Quick Set C20 ->Retrieve ->Integrator PackageC90 ->call barge ->presentation sharing
Verify the usercan able to parkthe rendezvousconference callfrom CiscoUnifiedCommunicationsManagerregistered CiscoUnified IPPhone 8941 andthen retrieve iton shared lineCiscoTelePresenceSystem QuickSet C20, thenshare thepresentation
Park therendezvousconferencecall from8941 andretrieve it onshared lineQuick SetC20, thenshare thepresentation
UCJ10Ph2S.TPC.G.015
Passed8941 -> 9971->Unified CM ->SIP Trunk ->TelePresenceconductor -> mediaresource ->rendezvousconference; 9971 ->Park->Unified CM->Quick Set C20 ->Retrieve -> sharingthe presentation
Verify the usercan able parkthe rendezvousconference callfrom CiscoUnifiedCommunicationsManagerregistered CiscoUnified IPPhone 9971 andthen retrieve iton CiscoTelePresenceSystemIntegratorPackage C90then share thepresentation
Park therendezvousconferencecall from9971 andretrieve it onIntegratorPackage C90then share thepresentation
UCJ10Ph2S.TPC.G.016
Test Results for Cisco Unified Communications System Release 10.0 for Japan114 OL-31616-01
Test Results SummaryCisco TelePresence Conductor
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedQuick Set C20 ->Unified CM ->8941(EMLogin) ->DX650 -> UnifiedCM -> SIP Trunk-> Telepresenceconductor -> mediaresource ->rendezvousconference;DX650->Park ->Unified CM ->Quick Set C20 ->Retrieve ->presentation sharing
Verify the usercan able to parkthe rendezvousconference callfrom CiscoUnifiedCommunicationsManagerregisteredDX650 andthen retrieve iton extensionmobilityenabled CiscoTelePresenceSystem QuickSet C20 thensharing thepresentation
Park therendezvousconferencecall fromDX650 andretrieve it onEM enabledQuick SetC20, thensharing thepresentation
UCJ10Ph2S.TPC.G.017
PassedEX60 -> Quick SetC20 ->SX20 QuickSet -> Cisco VCS->TPC-> MCU
Verify thesecondaryTelepresenceconductor cansupport in thelong durationrendezvousvideoconferencebetween CiscoTelePresenceVideoCommunicationServerregistered endpoints
Switch tosecondaryTelepresenceconductorwhen primaryconductorgoes down inlong durationrendezvousvideoconferencebetweenCisco VCSregistered endpoints
UCJ10Ph2S.TPC.G.018
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 115
Test Results SummaryCisco TelePresence Conductor
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed8941-> 8945->9971->Unified CM-> TPC -> MCU
Verify thesecondaryTelepresenceconductor cansupport for thelong durationrendezvousvideoconferencebetween CiscoUnifiedCommunicationsManagerregistered CiscoUnified IPPhones
Switch tosecondaryTelepresenceconductorwhen primaryconductorgoes down inlong durationrendezvousvideoconferencebetweenUnified CMregistered IPPhones
UCJ10Ph2S.TPC.G.019
CSCul04054FailedEX/C Series ->Unified CM -> SIPTrunk -> TPConductor ->MediaResource ->rendezvousConference ->EX/C Series ->Transfer ->UnifiedCM -> 8941 ->Conference
Verify the usercan transfer theConference callfrom CiscoUnifiedCommunicationsManagerregistered EX/Cseries phones toCisco UnifiedIP Phone 8941
Transfer theConferencecall fromUnified CMregisteredEX/C seriesphones to8941 IPPhone
UCJ10S.TPC.G.037
Test Results for Cisco Unified Communications System Release 10.0 for Japan116 OL-31616-01
Test Results SummaryCisco TelePresence Conductor
Cisco TelePresence ServerDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedQuickset C20 ->Cisco VCS->Cisco TS 7010
To verify thatuser can ableto initiate theMeetMe videoconferencefrom QuicksetC20 registeredwith CiscoVCS usingCiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Initiate theMeet Mevideoconferencefrom QuicksetC20 registeredwith CiscoVCS usingCisco TS 7010registeredwithCisco VCS asa SIP registrar
UCJ10Ph2S.TS.G.001
PassedIntegrator PackageC90 -> UnifiedCM-> SIP Trunk-> Cisco VCS->Cisco TS 7010
To verify thatuser can ableto initiate theMeetMe videoconferencefrom IntegratorPackage C90registered withUnified CMusing CiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Initiate theMeet MevideoconferencefromIntegratorPackage C90registeredwithUnified CMusing CiscoTS 7010registeredwithCisco VCS asa SIP registrar
UCJ10Ph2S.TS.G.002
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 117
Test Results SummaryCisco TelePresence Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed8945 -> UnifiedCM -> SIPTrunk-> CiscoVCS->Cisco TS7010
To verify thatuser can ableto initiate theMeetMe videoconferencefrom IP Phone8945 registeredwith UnifiedCM usingCiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Initiate theMeet Mevideoconferencefrom IP Phone8945registeredwithUnified CMusing CiscoTS 7010registeredwithCisco VCS asa SIP registrar
UCJ10Ph2S.TS.G.003
PassedSX20 Quickset(set audio) ->Cisco VCS ->Cisco TS 7010
To verify thatuser can ableto initiate theMeetMe audioconferencefrom SX20Quicksetregistered withCisco VCSusing CiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Initiate theMeet Meaudioconferencefrom SX20QuicksetregisteredwithCisco VCSusing CiscoTS 7010registeredwithCisco VCS asa SIP registrar
UCJ10Ph2S.TS.G.004
Passed6961 -> UnifiedCM-> SIP Trunk-> Cisco VCS->Cisco TS 7010
To verify thatuser can ableto initiate theMeetMe audioconferencefrom 6961registered withUnified CMusing CiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Initiate theMeet Meaudioconferencefrom 6961registeredwithUnified CMusing CiscoTS 7010registeredwithCisco VCS asa SIP registrar
UCJ10Ph2S.TS.G.005
Test Results for Cisco Unified Communications System Release 10.0 for Japan118 OL-31616-01
Test Results SummaryCisco TelePresence Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedQuickset C20 ->Unified CM -> SIPTrunk -> Cisco TS7010
To verify thatuser can ableto initiate theMeet Meconferencefrom QuicksetC20 registeredwith UnifiedCm using EMenabled uservia CiscoTelePresenceServer 7010
Initiate theMeet Meconferencefrom QuicksetC20 registeredwith UnifiedCM using EMenabled uservia Cisco TS7010
UCJ10Ph2S.TS.G.006
PassedQuickset C20,EX60 andEX90(EM) ->Unified CM->Conductor->SIPTrunk-> Cisco TS7010
Verify the usercan able makean adhoc videoconferencebetween CiscoUnifiedCommunicationsManagerregisteredExtensionMobilityenabled VideoEndpoints
Make anadhocconferencebetweenUnified CMregistered EMenabled VideoEndpoints
UCJ10Ph2S.TS.G.007
PassedQuicksetC20->UnifiedCM->SIP Trunk-> Cisco TS7010-> Initiatevideo conferenceQuickset C20->Transfer-> 8945
Verify the usercan abletransfer theMeetMe videoconference callfrom CiscoUnifiedCommunicationsManagerregistered EMenabledQuickset C20to CiscoUnified IPPhone 8945
Transfer theMeet Mevideoconferencecall fromUnified CMregistered EMenabledQuickset C20to 8945
UCJ10Ph2S.TS.G.008
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 119
Test Results SummaryCisco TelePresence Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed8941->UnifiedCM -> SIPTrunk-> Cisco TS7010->Initiateconference8941->Transfer ->EX60
Verify the usercan abletransfer therendezvousconference callfrom CiscoUnifiedCommunicationsManagerregisteredCisco UnifiedIP Phone 8941to EM enabledEX60
Transfer theMeet Mevideoconferencecall fromUnified CMregistered8941 to EMenabled EX60
UCJ10Ph2S.TS.G.009
PassedQuickset C20 ,EX60 and EX90->Cisco VCS ->Cisco TS 7010
To verify thatuser can ableto do Meet Mevideoconferencebetween videoendpointsregistered withCisco VCSusing CiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Meet Mevideoconferencebetween videoendpointsregisteredwithCisco VCSusing CiscoTS 7010registeredwithCisco VCS asa SIP registrar
UCJ10Ph2S.TS.G.010
Passed8941 , 8945and8961->UnifiedCM-> SIPTrunk-> CiscoVCS-> Cisco TS7010
To verify thatuser can ableto do the MeetMe videoconferencebetween IPPhone 8900seriesregistered withUnified CMusing CiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Meet Mevideoconferencebetween IPPhone 8900SeriesregisteredwithUnified CMusing CiscoTS 7010registeredwithCisco VCS asa SIP registrar
UCJ10Ph2S.TS.G.011
Test Results for Cisco Unified Communications System Release 10.0 for Japan120 OL-31616-01
Test Results SummaryCisco TelePresence Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedQuickset C20 ,EX60 and EX90->Unified CM-> SIPTrunk->CiscoVCS -> Cisco TS7010
To verify thatuser can ableto do Meet Mevideoconferencebetween videoendpointsregistered withUnified CMusing CiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Meet Mevideoconferencebetween videoendpointsregisteredwithUnified CMusing CiscoTS 7010registeredwithCisco VCS asa SIP registrar
UCJ10Ph2S.TS.G.012
PassedQuickset C20->Unified CM-> SIPTrunk-> CiscoVCS -> Cisco TS7010 ; QuicksetC20 ->Transfer->8945
To verify thatuser can ableto transfer theMeetMe videoconferencefrom UnifiedCM registeredQuickset C20to 8945 usingCiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Transfer theMeet Mevideoconferencefrom UnifiedCMRegisteredQuickset C20to 8945
UCJ10Ph2S.TS.G.013
PassedQuickset C20 ->Cisco VCS ->Cisco TS 7010Quickset C20 ->Transfer-> EX60
To verify thatuser can ableto transfer theMeetMe videoconferencefrom UnifiedCM registeredQuickset C20to EX60 usingCiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Transfer theMeet Mevideoconferencefrom CiscoVCSregisteredQuickset C20to EX60
UCJ10Ph2S.TS.G.014
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 121
Test Results SummaryCisco TelePresence Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX60 -> CiscoVCS -> Cisco TS7010 EX60->Transfer->9971
To verify thatuser can ableto transfer theMeetMe videoconferencefrom UnifiedCM registeredQuickset C20to 9971 usingCiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Transfer theMeet Mevideoconferencefrom EX60registeredwithCisco VCS to9971registeredwithUnified CM
UCJ10Ph2S.TS.G.015
PassedQuickset C20 ,EX60 -> CiscoVCS-> Cisco TS7010->PresentationSharing ; QuicksetC20->Transfer->EX90
To verify thatuser can ableto Transfer thevideoconferencebetween videoendpointsregistered withCisco VCSwhile sharingthepresentation
Transfer thevideoconferencebetween videoendpointsregisteredwithCisco VCSwhile sharingthepresentation
UCJ10Ph2S.TS.G.016
PassedQuickset C20 ,EX60 -> CiscoVCS-> Cisco TS7010 ; 8945 and8941-> UnifiedCM-> SIPTrunk->CiscoVCS -> Cisco TS7010
To verify thatuser can ableto Initiate theMeetMe videoconferencebetweenUnified CMRegisteredendpoints andCisco VCSregisteredendpointsusing CiscoTelePresenceServer 7010registered withCisco VCS asa SIP registrar
Meet MevideoconferencebetweenUnified CMregisteredendpoints andCisco VCSregisteredendpoints
UCJ10Ph2S.TS.G.017
Test Results for Cisco Unified Communications System Release 10.0 for Japan122 OL-31616-01
Test Results SummaryCisco TelePresence Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedQuickset C20->Unified CM -> SIPTrunk -> Cisco TS7010 ->PresentationSharing
To verify thatuser can ableto initiate theMeet Meconferencefrom QuicksetC20 registeredwith UnifiedCM using EMenabled uservia CiscoTelePresenceServer 7010and share thepresentationwhile in videoconference
Meet Meconferencefrom QuicksetC20 registeredwith UnifiedCM using EMenabled uservia Cisco TS7010 andshare thepresentationwhile in videoconference
UCJ10Ph2S.TS.G.018
PassedQuickset C20(H.323) -> CiscoVCS-> Cisco TS7010
To verify thatuser can ableto initiate theMeetMe videoconferencefrom QuicksetC20 registeredwith CiscoVCS as aH.323 endpointusing CiscoTelePresenceServer 7010
Meet Mevideoconferencefrom videoendpointregisteredwithCisco VCS asa H.323endpoint
UCJ10Ph2S.TS.G.019
PassedQuickset C20,EX60 and EX90(H.323) -> CiscoVCS-> Cisco TS7010 ->PresentationSharing
To verify thatuser can ableto initiate theMeetMe videoconferencebetweenQuickset C20,EX60 andEX90registered withCisco VCS asa H.323endpoints andsharing thepresentation
Meet Mevideoconferencebetween videoendpointsregisteredwithCisco VCS asa H.323endpoint andShare thePresentation
UCJ10Ph2S.TS.G.020
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 123
Test Results SummaryCisco TelePresence Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedQuickset C20(SIP) and EX90(H.323) -> CiscoVCS->Cisco TS7010
To verify thatuser can ableto initiate theMeetMe videoconferencebetween CiscoVCS registeredQuickset C20as a SIPendpoint andEX60 as aH.323 endpointusing Cisco TS7010
Meet Meconferencebetween CiscoVCSregisteredQuickset C20(SIP endpoint)and EX60(H.323endpoint)
UCJ10Ph2S.TS.G.021
PassedQuickset C20(SIP) -> CiscoVCS-> Cisco TS7010 QuicksetC20(SIP) ->Transfer-> EX60(H.323)
To verify thatuser can ableto transfer theMeetMe videoconferencefrom CiscoVCS registeredQuickset C20as a SIPendpoint toEX60 as aH.323 endpointusing Cisco TS7010
Transferconferencecall fromCisco VCSregisteredQuickset C20(SIP endpoint)to EX60(H.323endpoint)
UCJ10Ph2S.TS.G.022
PassedQuickset C20(SIP) and EX90(H.323) ->CiscoVCS-> Cisco TS7010
To verify thatuser can ableto Share thePresentation inMeetMe videoconferencebetween CiscoVCS registeredQuickset C20as a SIPendpoint andEX60 as aH.323 endpointusing Cisco TS7010
Presentationsharing inMeet Mevideoconferencebetween CiscoVCSregisteredQuickset C20(SIP endpoint)and EX60(H.323endpoint)
UCJ10Ph2S.TS.G.023
Test Results for Cisco Unified Communications System Release 10.0 for Japan124 OL-31616-01
Test Results SummaryCisco TelePresence Server
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
Passed8945-ph1->Unified CM->SIPTrunk ->CiscoTS7010 ; 8945 -ph1-> park ->Unified CM->8945 - ph2 ->retrieve
To verify thatuser can ableto park andretrieve theMeetMe videoconferencefrom IP Phone8945 usingCisco TS 7010
Park andretrieve theMeet Mevideoconferencefrom IP Phone8945registeredwithUnified CM
UCJ10Ph2S.TS.G.024
Passed8945 -> UnifiedCM -> SIPTrunk-> Cisco TS7010 ; 8945 ->park -> UnifiedCM -> QuicksetC20 -> retrieve
To verify thatuser can ableto park theMeetMe videoconferencefrom IP Phone8945 andretrieve theconferenceQuickset C20using Cisco TS7010
Park the MeetMe videoconferencefrom IP Phone8945registeredwithUnified CMand Retrievethe conferencefrom QuicksetC20
UCJ10Ph2S.TS.G.025
Cisco Collaboration ExpresswayDefectsStatusCall Component
FlowDescriptionTitleLogical ID
PassedEX60-> EX90 ->Cisco VCS-E ->Cisco VCS-C ->Unified CM ->Video call
Verify the usercan able tomake a videocall betweenCiscoTelePresenceSystem EX60and CiscoTelePresenceSystem EX90,which is inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Video CallbetweenEX60and EX90 viaCollaborationEdge
UCJ10Ph2S.CE.G.001
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 125
Test Results SummaryCisco Collaboration Expressway
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX60-> EX90 ->Cisco VCS-E ->Cisco VCS-C ->Unified CM ->Video call
Verify the usercan able to holdand resume avideo callbetween CiscoTelePresenceSystem EX60and CiscoTelePresenceSystem EX90,which is inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Hold andResume thevideo callbetweenEX60and EX90 viaCollaborationEdge
UCJ10Ph2S.CE.G.002
PassedEX60-> EX90 ->Cisco VCS-E ->Cisco VCS-C ->Unified CM ->Video call
Verify the usercan able toallow websnapshots whenvideo callbetween CiscoTelePresenceSystem EX60and CiscoTelePresenceSystem EX90,which is inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
WebSnapshotswhen videocall betweenEX60 andEX90 viaCollaborationEdge
UCJ10Ph2S.CE.G.003
Test Results for Cisco Unified Communications System Release 10.0 for Japan126 OL-31616-01
Test Results SummaryCisco Collaboration Expressway
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX60-> EX90-1 ->EX90-2 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM -> Video call->EX60-> EX90-1
Verify the usercan able tomake a videocall transferfrom CiscoTelePresenceSystemEX60 toCiscoTelePresenceSystem EX90,which is inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Video CallTransfer fromEX60 to EX90viaCollaborationEdge
UCJ10Ph2S.CE.G.004
PassedEX90 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM; Quick Set C20-> Unified CM ->EX90 -> Video call
Verify the usercan able tomake a videocall from CiscoTelePresenceSystem QuickSet C20 incorporatenetwork, toCiscoTelePresenceSystemEX90 inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Video Callfrom QuickSet C20(corporate) toEX90(remote) viaCollaborationEdge
UCJ10Ph2S.CE.G.005
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 127
Test Results SummaryCisco Collaboration Expressway
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX90 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM; Quick Set C20-> Unified CM ->EX90 -> ModifiedBandwidth -> Videocall
Verify the usercan able tomodify videocall bandwidthfrom CiscoTelePresenceSystem QuickSet C20 incorporatenetwork, toCiscoTelePresenceSystemEX90 inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Modifiedbandwidthvideo callbetweenEX90(remote) andQuick Set C20(corporate) viaCollaborationEdge
UCJ10Ph2S.CE.G.006
PassedEX90 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM ; EX60-> EX90-> Unified CM ->Shared line ; EX90-> Unified CM ->EX90 -> Video call
Verify the usercan able tomake a videocall from sharedline CiscoTelePresenceSystemEX90 incorporatenetwork, toCiscoTelePresenceSystemEX90 inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Video Callfrom sharedline EX90(corporate) toCiscoTelepresenceSystem EX90(remote) viaCollaborationEdge
UCJ10Ph2S.CE.G.007
Test Results for Cisco Unified Communications System Release 10.0 for Japan128 OL-31616-01
Test Results SummaryCisco Collaboration Expressway
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX90 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM; Quick Set C20-> Unified CM ->EX60 -> EX90
Verify the usercan able toforward all thevideo call fromCiscoTelePresenceSystemEX60 incorporatenetwork, toCiscoTelePresenceSystemEX90 inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Call forwardall from EX60(corporate) toEX90(remote) viaCollaborationEdge
UCJ10Ph2S.CE.G.008
PassedEX60 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM; Quick Set C20-> Unified CM ->SX20 Quick Set ->EX60
Verify the usercan able toperfomconsultativetransfer of videocall from CiscoTelePresenceSX20Quick Setin corporatenetwork, toCiscoTelePresenceSystemEX60 inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
ConsultativeCall transferfrom SX20Quick Set(corporate) toEX60(remote) viaCollaborationEdge
UCJ10Ph2S.CE.G.009
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 129
Test Results SummaryCisco Collaboration Expressway
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX90 -> EX60->SX20 Quick Set ->Cisco VCS-E ->Cisco VCS-C
Verify the usercan able tomake a videocall conferencebetween CiscoTelePresenceSystem EX60,CiscoTelePresenceSystem EX90and CiscoTelePresenceSX20 QuickSet, which is inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Video CallconferencebetweenEX60, EX90and SX20Quick Set viaCollaborationEdge
UCJ10Ph2S.CE.G.010
PassedEX90 -> EX60->SX20 Quick Set ->Cisco VCS-E ->Cisco VCS-C
Verify the usercan able toshare thepresentationduring videocall conferencebetween CiscoTelePresenceSystem EX60,CiscoTelePresenceSystem EX90and CiscoTelePresenceSX20 QuickSet, which is inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Presentationsharing inconferencecall betweenEX60, EX90and SX20Quick Set viaCollaborationEdge
UCJ10Ph2S.CE.G.011
Test Results for Cisco Unified Communications System Release 10.0 for Japan130 OL-31616-01
Test Results SummaryCisco Collaboration Expressway
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX90 -> EX60->SX20 Quick Set ->Cisco VCS-E ->Cisco VCS-C
Verify the usercan able tochangepresentationlayout duringvideo callconferencebetween CiscoTelePresenceSystem EX60,CiscoTelePresenceSystem EX90and CiscoTelePresenceSX20 QuickSet, which is inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Change thepresentationlayout whileconferencecall betweenEX60, EX90and SX20Quick Set viaCollaborationEdge
UCJ10Ph2S.CE.G.012
PassedEX90 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM;6945 ->UnifiedCM -> EX90 ->Audio call
Verify the usercan able tomake an audiocall fromUnified IPPhone 6945 incorporatenetwork, toCiscoTelePresenceSystemEX90 inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Audio Callbetween 6945(corporate)and EX90(remote) viaCollaborationEdge
UCJ10Ph2S.CE.G.013
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 131
Test Results SummaryCisco Collaboration Expressway
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX90 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM; EX90 ->Unified CM -> SIPTrunk -> CiscoVCS-> EX60 ->Video call
Verify the usercan able tomake a videocall from CiscoTelePresenceSystemEX90 inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoTelePresenceSystem EX60registered inCiscoTelePresenceVideoCommunicationServer
Video Callfrom EX90(remote) viaCollaborationEdge to CiscoVCSregisteredEX60(corporate)
UCJ10Ph2S.CE.G.014
Test Results for Cisco Unified Communications System Release 10.0 for Japan132 OL-31616-01
Test Results SummaryCisco Collaboration Expressway
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX90 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM; Quick Set C20-> Cisco VCS-> SIPTrunk -> UnifiedCM -> EX60 ->EX90
Verify the usercan able toforward all thevideo call fromCiscoTelePresenceSystemEX60 incorporatenetwork, toCiscoTelePresenceSystemEX90 inremote networkregistered insame CiscoUnifiedCommunicationsManager viaCollaborationEdge , whengetting the callfrom CiscoTelePresenceVideoCommunicationServerregistered CiscoTelePresenceSystem QuickSet C20
Call forwardall from EX60(corporate) toEX90(remote) viaCollaborationEdge, whengetting the callfrom CiscoVCSregisteredQuick Set C20
UCJ10Ph2S.CE.G.015
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 133
Test Results SummaryCisco Collaboration Expressway
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX60 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM; DX650 ->Unified CM ->8941-> EX60
Verify the usercan able totransfer thevideo call fromUnified IPPhone 8941 incorporatenetwork, toCiscoTelePresenceSystemEX60 inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Call transferfrom 8941(corporate) toEX60(remote) viaCollaborationEdge
UCJ10Ph2S.CE.G.016
PassedEX60 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM; IntegratorPackage C90 ->Unified CM -> 9971-> EX60
Verify the usercan able to parkthe video call inUnified IPPhone 9971 incorporatenetwork, andretrieve fromCiscoTelePresenceSystemEX60 inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Call Park in9971(corporate)and retrievefrom EX60(remote) viaCollaborationEdge
UCJ10Ph2S.CE.G.017
Test Results for Cisco Unified Communications System Release 10.0 for Japan134 OL-31616-01
Test Results SummaryCisco Collaboration Expressway
DefectsStatusCall ComponentFlow
DescriptionTitleLogical ID
PassedEX90 -> CiscoVCS-E -> CiscoVCS-C -> UnifiedCM1; 8941 ->Unified CM2 -> SIPTrunk -> UnifiedCM1 -> EX90 ->Video call
Verify the usercan able tomake a videocall through SIPTrunk betweenCisco UnifiedIP Phone 8941in corporatenetwork andCiscoTelePresenceSystemEX90 inremote networkregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge
Inter clustervideo callthrough SIPTrunkbetween 8941(corporate)and EX90(remote) viaCollaborationEdge
UCJ10Ph2S.CE.G.018
RegressionRegression Execution
Failed %FailedPassed W/X%
PassedW/X
Passed %PassedTotal testcases
Featurestested
0%00%0100%55Auto-callPickup
0%00%0100%1414Call ForwardAll
0%00%0100%66Call ForwardBusy
0%00%0100%1313Call Park
0%00%0100%1919Call Pickup
0%00%0100%33Call Transfer
0%00%0100%33CBarge
0%00%0100%77Conference
0%00%0100%99ConferenceList
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 135
Test Results SummaryRegression
Regression Execution
Failed %FailedPassed W/X%
PassedW/X
Passed %PassedTotal testcases
Featurestested
0%00%0100%11DND
0%00%0100%55HoldReversion
0%00%0100%11iDivert
0%00%0100%2626MakeCall
0%00%0100%11MeetMe
0%00%0100%11OPickup
0%00%0100%55ParkReversion
0%00%0100%11Privacy onHold
0%00%0100%55Redial
0%00%0100%33Shared Line
0%00%0100%128128TOTAL
Related DocumentationCisco Unified CM
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/10_0_1/delta/CUCM_BK_C206A718_00_cucm-new-and-changed-1001.html
Cisco Unified Communications Self Care Portal User Guide 10.0.0
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/useroptions/10_0_1/CUCM_BK_U263A6A9_00_uc-self-care-user-guide_1001.html
Cisco Unified IP Phones
Cisco IP Phone 78xx - Release Notes
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7821_7841_7861/firmware/10_1_1/english/release_notes/PA2D_BK_RFC9D799_00_rn-10_1_1-7821-7841-7861/PA2D_BK_RFC9D799_00_rn-10_1_1-7821-7841-7861_chapter_00.html
Cisco Unified IP Phone 79xx - Release Notes
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7900_series/firmware/931sr3/P790_BK_R6CE16B3_00_rn-9_3_1sr3-7900-series/P790_BK_R6CE16B3_00_rn-9_3_1sr3-7900-series_chapter_00.html
Test Results for Cisco Unified Communications System Release 10.0 for Japan136 OL-31616-01
Test Results SummaryRelated Documentation
Cisco Unified IP Phone 894x - Release Notes
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8941_8945/firmware/9_4_1/english/release_notes/P415_BK_8E0B5E98_00_8941-8945-release-notes-9_4_1.pdf
Cisco Unified Conference IP Phone 8831
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/8831/firmware/9_3_3/english/release_notes_new/CS38_BK_R67E3E94_00_rn-9_3_3-8831.pdf
Cisco Desktop Collaboration Experience DX650
Admin Guide
http://www.cisco.com/en/US/docs/voice_ip_comm/cdce/dx600/admin/10_0_1/english/DX60_BK_C989350E_00_cisco-desktop-collaboration-experience-dx600_chapter_01000.html
Release Notes
http://www.cisco.com/en/US/docs/voice_ip_comm/cdce/dx600/rel_notes/10_0_1/DX60_BK_REDB6417_00_release-notes-for-cisco-desktop_chapter_00.html
Data Sheet
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps12956/ps12959/data_sheet_c78-726888ps12956_Products_Data_Sheet.html
Quick start
http://www.cisco.com/en/US/docs/voice_ip_comm/cdce/dx600/qs/10_0_1/english/dx650qs1001en.pdf
User Guide
http://www.cisco.com/en/US/docs/voice_ip_comm/cdce/dx600/user/10_0_1/english/DX60_BK_CAA8EFA0_00_cisco-desktop-collaboration-experience-dx650_chapter_01.html
Useful Link
http://www.cisco.com/en/US/prod/voicesw/ps6788/phones/ps12956/ps12959/dx_650_series_video.html
Cisco Unified CME
Design Guide
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/cmesrnd.html
Administration Guide
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeroad.html
Cisco Unified Survivable Remote site Telephony
http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide.html
Cisco Unity Connection
Documentation Guide
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/roadmap/10xcucdg.html
Administration Guide
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/administration/guide/10xcucsagx.html
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 137
Test Results SummaryRelated Documentation
Cisco UC Integration ™ for Microsoft Lync 9.x or later
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucilync/9/CUCI_BK_C0545A41_00_cisco-uc-integration-for-microsoft.html
Cisco Unified Border Element
http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb_book/vb_book.html
Cisco Jabber for Windows
Installation Guide
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_6/InstallConfig/JABW_BK_CDFE9752_00_installation-and-configuration/JABW_BK_CDFE9752_00_installation-and-configuration_chapter_01.html
Release Notes
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_6/ReleaseNotes/JABW_BK_CC514631_00_cisco-jabber-for-windows-release.html
Cisco Jabber for Mac
Release Notes
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/9_5/JABI_BK_JDF7E7EA_00_release-notes-jabber-mac-9-2-1.pdf
Installation And Configuration Guide
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/mac/9.2.1/JABM_BK_CB0ACEBC_00_cisco-jabber-for-mac-installation.pdf
Cisco Jabber for iPhone
Release Notes
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/9_5/JABI_BK_JDF7E7EA_00_jabber-iphone-release-notes-9-5.pdf
Installation And Configuration Guide
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/9_5/JABI_BK_JF37EFA2_00_jabber-iphone-installation-and-configuration-9-5.pdf
Server Setup Guide
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/9_5/JABI_BK_J38B2ACB_00_jabber-iphone-server-setup-9-5.pdf
Cisco VCS
Release Notes
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/release_note/Cisco-VCS-Release-Note-X8-1.pdf
Getting started Guide
Test Results for Cisco Unified Communications System Release 10.0 for Japan138 OL-31616-01
Test Results SummaryRelated Documentation
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/install_guide/Cisco-VCS-Getting-Started-X8-1.pdf
Configuration Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Cisco-VCS-Basic-Configuration-Single-VCS-Control-Deployment-Guide-X8-1.pdf
Administration Guide
http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/admin_guide/Cisco-VCS-Administrator-Guide-X8-1.pdf
Cisco TelePresence Server 7010
Release Notes
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/release_note/Cisco_TelePresence_Server_Software_Release_Notes_3-1_1-97.pdf
Deployment Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/deployment_guide/Cisco_TelePresence_Server_Deployment_Guide.pdf
Installation Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco_TelePresence_Server_7010_Installation_Guide.pdf
Cisco TelePresence Server on VM
Release Notes
http://www.cisco.com/en/US/docs/telepresence/infrastructure/ts/release_note/Cisco_TelePresence_Server_on_Virtual_Machine_Release_Notes_3-1_1-96.pdf
Installation Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/vts_install.pdf
Cisco TelePresence Management Suite
Administration Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-14-3-2.pdf
Installation Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/install_guide/Cisco_TMS_install_guide_14-3.pdf
Release Notes
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/release_note/Cisco-TMS-release-notes-14-3-2.pdf
Cisco TelePresence SX20 Quickset
Getting Started
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 139
Test Results SummaryRelated Documentation
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/quick-set-sx20/tc7/getting-started-guide/video-systems-getting-started-guide-tc70.pdf
Administration Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/quick-set-sx20/tc7/administration-guide/sx20-quickset-administrator-guide-tc70.pdf
Release Notes
http://www.cisco.com/en/US/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf
Cisco TelePresence System EX90
Getting Started
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/getting-started-guide/video-systems-getting-started-guide-tc70.pdf
Administration Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/administration-guide/ex-series-administrator-guide-tc70.pdf
Release Notes
http://www.cisco.com/en/US/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf
Cisco TelePresence System Integrator Package C90
Getting Started
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/getting-started-guide/video-systems-getting-started-guide-tc70.pdf
Administration Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/profile-c90-and-codec-c90-administrator-guide-tc70.pdf
Release notes
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf
Cisco TelePresence TX9000
Release Notes
http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/release/notes/tx_sw_6_0_release_notes.pdf
Cisco TelePresence MCU
Administration Guide
http://www.cisco.com/en/US/docs/telepresence/infrastructure/mcu/admin_guide/Cisco_TelePresence_MCU_4-4_Product_administration_guide.pdf
Release Notes
Test Results for Cisco Unified Communications System Release 10.0 for Japan140 OL-31616-01
Test Results SummaryRelated Documentation
http://www.cisco.com/en/US/docs/telepresence/infrastructure/mcu/release_note/Cisco_TelePresence_MCU_Software_release_notes_4-4_3-57.pdf
Cisco TelePresence conductor
Administration Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/Cisco_TelePresence_Conductor_Admin_Guide_XC2-2.pdf
Installation Guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/install_guide/Cisco_TelePresence_Conductor_Getting_Started_Guide_XC2-x.pdf
Release Notes
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/release_note/Cisco_TelePresence_Conductor_Release_Notes_XC2-2-1.pdf
Cisco Collaboration Expressway
Administration Guide
http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/admin_guide/Cisco-VCS-Administrator-Guide-X8-1.pdf
Test Results for Cisco Unified Communications System Release 10.0 for Japan OL-31616-01 141
Test Results SummaryRelated Documentation
Test Results for Cisco Unified Communications System Release 10.0 for Japan142 OL-31616-01
Test Results SummaryRelated Documentation