Cisco 642-436Cisco Voice over IP (CVOICE)

10 Q&A

Version 3.0

http://www.testchief.com/642-436.htm

Leading the way in IT testing and certification tools, www.TestChief.com

- 2 -

Important Note, Please Read Carefully

Other testchief productsA) Offline Testing engineUse the offline Testing engine product topractice the questions in an exam environment.

Build a foundation of knowledge which will be useful also after passing the exam.

Latest VersionWe are constantly reviewing our products. New material is added and old material isrevised. Free updates are available for 90 days after the purchase. You should check yourmember zone at testchief and update 3-4 days before the scheduled exam date.

Here is the procedure to get the latest version:

1.Go towww.testchief.com2.Click on Log in3.The latest versions of all purchased products are downloadable from here. Just click thelinks.For most updates,it is enough just to print the new questions at the end of the newversion, not the whole document.

FeedbackIf you spot a possible improvement then please let us know. We always interested inimproving product quality.Feedback should be send to feedback@testchief.com. You should include the following:Exam number, version, page number, question number, and your login Email.

Our experts will answer your mail promptly.

CopyrightEach iPAD file is a green exe file. if we find out that a particular iPAD Viewer file isbeing distributed by you, testchief reserves the right to take legal action against youaccording to the International Copyright Laws.

ExplanationsThis product does not include explanations at the moment. If you are interested inproviding explanations for this exam, please contact feedback@testchief.com.

Leading the way in IT testing and certification tools, www.TestChief.com

- 3 -

www.testchief.com Q: 1 Refer to the exhibit. You have been asked to configure adial peer on R2 that will match only the extensions of the four telephones attached.Which dial-peer statement will you use?

A. dial-peer voice 1 potsdestination-pattern 5552.[0-5]0B. dial-peer voice 1 potsdestination pattern 5552[5-6].0C. dial-peer voice 1 potsdestination-pattern 555[2-5][56]D. dial-peer voice 1 potsdestination-pattern 5552[5-6][05]0

Answer: D

www.testchief.com Q: 2 Which option is true concerning the MGCP call agent?

A. acts only as a recorder of call detailsB. provides only call signaling and call setupC. manages all aspects of the call and voice streamD. monitors the quality of each call after setup

Leading the way in IT testing and certification tools, www.TestChief.com

- 4 -

Answer: B

www.testchief.com Q: 3 When setting up a VoIP call, what is the first thing agateway router tries to match to a dialed number?

A. call legB. IP routeC. session targetD. destination pattern

Answer: D

www.testchief.com Q: 4 Refer to the exhibit. Users are not able to complete a callfrom 678-555-1212 to 770-555-1111. What is the correct diagnosis for the problem?

Leading the way in IT testing and certification tools, www.TestChief.com

- 5 -

A. incorrect destination-pattern in router 1B. incorrect POTS dial-peer statement in router 2C. incorrect session-target statement in router 2D. incorrect port statement in router 1 pots dial peerE. missing no digit-strip on the voip dial peer in router 1

Answer: A

www.testchief.com Q: 5 The SJ local zone contains a gatekeeper that controls twogateways, SJ1 and SJ2. Both gateways provide access to area code 408. Which twocommand strings should be entered into the gatekeeper to give the SJ2 gatewaypriority over the SJ1 gateway? (Choose two.)

A. zone prefix SJ 408 gw-priority 6 SJ1

Leading the way in IT testing and certification tools, www.TestChief.com

- 6 -

B. zone prefix SJ 408 gw-priority 6 SJ2C. zone prefix SJ 408 gw-priority 10 SJ1D. zone prefix SJ 408 gw-priority 10 SJ2E. zone prefix SJ 408 gw-priority 0 SJ2, 10 SJ1F. zone prefix SJ 408 gw-priority 6 SJ1, 10 SJ2

Answer: A, D

www.testchief.com Q: 6 Refer to the exhibit. Highland Park Property Developmentis integrating a Cisco Unified Communications Manager Express system with theexisting PBX via an E1 QSIG trunk. After the initial configuration, no calls can beplaced from IP phones to PBX phones. How can this problem be resolved?

A. Increase the ISDN T302 timer to allow more time for call setup.B. Add the command isdn negotiate-bchan to the serial interface.C. Add the command isdn contiguous-bchan to the serial interface.

Leading the way in IT testing and certification tools, www.TestChief.com

- 7 -

D. Change the channel selection order from descending to ascending.

Answer: B

www.testchief.com Q: 7 Refer to the exhibit. The Carmichael caller dials the siteaccess code for Merrimack (6) followed by the four-digit extension number of thedestination phone (0124). If the call is going to go across the IP WAN, which actionwill have to be taken?

A. Translate 50124 to 5125550124.B. Strip the site access code and send four digits.C. Strip the site access code and prepend 1512555.D. Do nothing because the site access code matches the last five digits of the targetnumber.E. Strip the site access code, send four digits, then prepend the access code when itreaches the Merrimack gateway.

Leading the way in IT testing and certification tools, www.TestChief.com

- 8 -

Answer: B

www.testchief.com Q: 8 Which path selection mechanism lets you choose either theeven or odd channels first?

A. hunt groupsB. trunk groupsC. tailend hopoffD. Call Admission Control

Answer: B

www.testchief.com Q: 9 Which mechanism do you use to implement callingprivileges on Cisco Unified Communications Manager Express?

A. CoSB. QoSC. CACD. CORE. SRST

Answer: D

www.testchief.com Q: 10 Refer to theH.323 message in the exhibit. What is the gateway doing with the gatekeeper?

Leading the way in IT testing and certification tools, www.TestChief.com

- 9 -

A. initial registrationB. full registrationC. lightweight registrationD. registration retry

Answer: C