TESTE ERMARKETING

Save

20-35%Throughout!

Pricing effective 12/1/07 - 1/31/08.

Cobra-40Vi Autodarkening HelmetsPage 31

Airgas Ordering and Information

Find the Airgaslocation nearest you.866-924-7427

07 Metal Work 01-40.qxd:2005 Facility Safety #174CB.qxd 11/13/07 1:30 PM Page 1

Airgas 2007 Metal Working Product Guide Sale pricing effective 12/1/07-1/31/082

Providing productsolutions for all of yourmetal working needs.Airgas provides the gases, welding and safetyproducts, power tools and other supplies youneed to keep your operations running safelyand efficiently. Airgas is the largest U.S.distributor of gases and welding supplies and aleading distributor of safety products. We offerour customers a large selection of high qualityproducts with excellent technical support,same day shipping and competitive pricing.

With more than 1,100 locations nationwide, yoursupplies are available when you need them.Airgas employees work in branches, retailstores, gas fill plants, specialty gas labs,production facilities and distribution centers.Airgas also distributes its products and servicesthrough eBusiness, catalog and telesaleschannels. Its national scale and strong localpresence offer a competitive edge to itsdiversified customer base.

Ask your Airgas Representative for acopy of our NEWSafety Products catalogor full-line Radnor® Products catalog.

If you have an immediate product need,check out our eBusinesswebsite atwww.airgas.com. There you'll find over139,000 products available 24 hours a day.

We are confident thatYou'll find it with us.SM

You'll find it with us.SM

NEW

The right expertise.Our Sales Representatives will answerall of your questions – productavailability, technical specifications,pricing and shipping. We have over 250safety specialists committed to providingthe best safety products, value and service to ourcustomers. Experts in the industry, our Safety Specialistsare strategically located throughout North America and can offer:• On-Site Surveys • Cost-Saving Initiatives• Inventory Control • Hazard Assessment• Product Analysis • New Product Introductions• Technical Support

The right products.Airgas sales of welding hardgoods, tools and abrasivestotal more than $1 billion. Airgas is also one of the largestU.S. distributors of safety products with more than $440 millionin annual sales, we distribute more than 30,000 safety andoccupational health products frommore than 850 leadingmanufacturers. Our product selection is vast and welldeveloped, including the most popular and newestproduct innovations on the market today.

The right location.Airgas operates six strategically located RegionalDistribution Centers and more than 800 local Airgasstores across the United States. This extensive nationalnetwork enables us to provide exceptional service toour customers.• 60% of the population serviced within one day• 96% of the population serviced within two days• Orders received by 5pm local time are shipped same day from our six DC’s:

- Bristol, PA (Philadelphia) - Germantown,WI (Milwaukee)- Coppell, TX (Dallas/Ft Worth) - Hamilton, OH (Cincinnati)- Duluth, GA (Atlanta) - Whittier, CA (Los Angeles)

Our Integrated Distribution Network

07 Metal Work 02.qxd:Layout 1 11/13/07 9:37 AM Page 2

Welding

PowerSources

Airgas 2007 Metal Working Product Guide Sale pricing effective 12/1/07-1/31/08 3

A

D

C

FE

B

A. Millermatic® 140 With Auto-Set™ MIGWelderTheMillermatic® 140 with Auto-Set™ is a breakthrough control that automaticallysets your welder to the proper parameters. Auto-Set™ offers all-in-oneMIG,minus the guess work. The manual mode has the flexibility to manually set weldparameters for broader applications. This semiautomatic constant voltage wirewelding package is capable of welding 24 gauge up to 3⁄16" mild steel.Part Number Description PriceMIL 9073435 Millermatic® 140 With Auto-Set™ MIGWelder 115 Volt, 639.00

Single Phase, 60 HzWith M-10 MIG Gun And 10' Lead

B. Millermatic® 180 MIGWelderTheMillermatic® 180 has more output. This semiautomatic constant voltagewire welding package is capable of welding 24 gauge up to 5⁄16" mild steel.Part Number Description PriceMIL 907312 Millermatic® 180 MIGWelder 230 Volt, 1 Phase, 60 Hz 769.00

With M-10 MIG Gun And 10' Lead

C. Millermatic® 212 MIGWelderMillermatic® 212 -Welds material from 22 gauge to 3⁄8" thick in a single pass.Nowwith new angled drive system and other great new features.Part Number Description PriceMIL 907324 Millermatic® 212 MIGWelder 230vac 1 Phase, 1,499.00

60 HzWith 250 Amp .030" - .035" M-25 MIG Gun

D. Millermatic® 252 MIGWelderMillermatic® 252 -Welds material from 22 gauge to 1⁄2" thick in a single pass.Highest output in its class.Part Number Description PriceMIL 907321 Millermatic® 252 MIGWelder 230 Volt, 1 Phase, 1,949.00

60 HzWith 250 Amp .030" - .035" M-25 MIG Gun

E. Bobcat™ 250Welder/GeneratorThis high weld output engine drive is the standard for Stick and Flux Coredwelding. The rugged Bobcat™ 250 has the power and the key features that helpyou turn a profit. 9500 watts of auxiliary power.Part Number Description PriceMIL 907211 Bobcat™ 250 Welder/Generator with 23HP Kohler Engine 3,199.00

And Standard Receptacles, 10,500 Watts Peak, 250 AmpMIL 907212 Bobcat™ 250 Welder/Generator with 22HP Robin Engine 3,199.00

And Standard Receptacles, 10,500 Watts Peak, 250 Amp

F. Syncrowave® 200 AC/DC TIGWelderwith TIG Runner 230vac 1 phase 60 Hz

Best in class - the Syncrowave® 200 is a Squarewave power source packagethat provides you with professional performance at an economical price.Part Number Description PriceMIL 907308011 Syncrowave® 200 AC/DC TIGwith Runner 230vac 1,999.00

07 Metal Work 03_05.qxd:Layout 1 11/14/07 11:15 AM Page 3


Welding

Power

Sources

B

D

C

F

E

G

AA. Power MIG® 140CWire Feeder/MIG And Flux-CoredWelderThe PowerMIG® 140C designed for 115 volt household power does it all. ThePowerMIG® 140C has continuous voltage control for more critical projectswhere precise adjustment is required.Part Number Description PriceLIN K2471-1 Power MIG® 140C CombinationWire Feeder/MIG 609.00

And Flux-CoredWelder 115 Volt, Single Phase, 60 Hz

B. Power MIG® 180CWire Feeder/MIG And Flux-CoredWelderThe PowerMIG® 180C will help you get the job done. It’s a portable wire welderdesigned for use with industrial 230 volt input power, so you can weld on thickermaterial—up to 3⁄16" with MIG welding and 1⁄2" with gas-less flux-cored welding.Part Number Description PriceLIN K2473-1 Power MIG® 180C CombinationWire Feeder/MIG 749.00

And Flux-CoredWelder 230 Volt, Single Phase, 60 Hz

C. Power MIG® 215 MIGWelding PackageThe PowerMIG® 215 delivers a forgiving arc, excellent out-of-position arcaction, a wide voltage sweet spot at a given wire feed speed and low spatter.A rugged industrial wire drive system, wide 30-250 amp output range, standard15 foot gun and cable assembly, and 115 volt auxiliary power receptacle areuncommon in this class.Part Number Description PriceLIN K2326-1 Power MIG® 215 MIGWelding Package 230 Volt, 1,499.00

Single Phase, 50/60 Hz

D. Power MIG® 255CMIGWelderThe PowerMIG® 255C delivers a wide voltage sweet spot across the weldingrange, low spatter levels and a forgiving arc on steel, stainless and aluminum --even for demanding out-of-position work.Part Number Description PriceLIN K2416-1 Power MIG® 255CMIGWelder With Magnum 250L Gun, 1,949.00

15' Leads And Quick-Connect 230 Volt CV/DC,Single Phase, 60Hz

E. Ranger® GXTWelder/GeneratorThis Ranger delivers XTra welding performance with 250 amps for AC or DCstick and wire welding. And, it’s remote-ready for extended amperage control orAC TIG welding on aluminumwith Lincoln’s optional TIG module.Part Number Description PriceLIN K2382-3 Ranger® GXTWelder/Generator With 23HP Kohler Engine, 3,399.00

11,000 Watts Peak, 250 AmpWith Mechanical Fuel Pump

F. Ranger® 10,000 Plus Welder/GeneratorThe Ranger® 10,000 Plus is a rugged, reliable, general purpose AC/DC welderand an AC power generator. Welding capability includes stick, basic TIG, MIGand flux-cored welding. With 10,500 watts of peak AC generator power from theRanger® 10,000 Plus, use the peak power for starting and running motors. The9,000 watts of continuous power also makes this a versatile product for aplasma cutter, Lincoln® inverter, lights, tools or emergency power.Part Number Description PriceLIN K1419-5 Ranger® 10,000 Plus Welder/Generator With 23HP 2,679.00

Kohler Engine, 10,500 Watts Peak, 225 Amp

G. Precision TIG® 225 Ready-PakWith Cart AC/DC TIGWelderMicro-Start™ II Technology which delivers precision arc performance toimprove arc starting, welding and weld cratering. Features like patentedAuto-Balance™ and a built-in simple pulse control make the Precision TIG® 225easy to use.Part Number Description PriceLIN K2535-2 Precision TIG® 225 Ready-PakWith Cart AC/DC 2,069.00

TIGWelder, 230 Volt, Single Phase, 60 Hz


5

D


E

C

B

F

Available everywhere 12/01/07.Please see your local Airgas Branchfor availability!

A

PlasmaCutting

Systems

Available everywhere 12/01/07.Please see your local Airgas Branchfor availability!

A. Miller® Spectrum® 375 X-TREME™Plasma Cutting Systemwith Auto-Line™

Spectrum® 375 X-TREME™ with Auto-Line™, MVP™ Plugs and X-CASE™ make this18 pound unit the most portable ever! Auto-Line™ lets you connect to 115-230VAC single phase power, 50/60 Hz, without removing the cover to relink the unit.Just change theMVP™ plug to fit the receptacle and plug it in. To protect themachine while in transit, the X-CASE™ is the ultimate. Along with the Spectrum®

375 X-TREME™, there is also room for theMVP™ plugs, consumables, gloves andeye protection. Everything you need in one fantastic package.Part Numbero Description PriceMIL 907339 Miller® Spectrum® 375 X-TREME™ Plasma Cutting System 1,359.00

With Auto-Line™, MVP™ Plugs And X-CASE™ Carry Case

B. Miller® Spectrum® 625 Plasma Cutting SystemA portable plasma arc cutter that can produce a 5⁄8" quality cut, the Spectrum625 has loads of features that make cutting a breeze. The Spectrum’s ICE-40Ctorch is ergonomically designed to increase comfort, as the safety triggerprevents accidental starts. Pilot Arc Controller improves tip life and maintainsuninterrupted cutting.Part Number Description PriceMIL 907058 Miller® Spectrum® 625 Plasma System 230 Volt, 1,899.00

1 PhaseWith ICE-40C Torch And 25' Leads

C. Hypertherm® Powermax 30® Plasma Cutting SystemHypertherm® Powermax 30® uses Boost Inverter technology to create a full 30-amp rated plasma cutter – the most cutting power of any machine operating onhousehold (120V) input power. Cutting capacity is 3⁄8".Part Number Description PriceHYP 088003 Powermax 30® w/15’ T30V Torch, 115/230 VAC 1,159.00

D. Hypertherm® Powermax 600® Plasma Cutting SystemThe Powermax 600® raises performance and reliability with this air plasmacutter with cut capacity of 1⁄2".Part Number Description PriceHYP 086031 Powermax 600® w/25’ PAC123T Torch, 230 VAC 1,599.00

E. Thermal Dynamics® CUTMASTER™ TRUE™

Series 39 Air Plasma Cutting SystemThe Thermal Dynamics® CUTMASTER™ TRUE™ Series 39 Plasma Cutting Systemhas a truly rugged design. CUTMASTER™ 39 accepts standard 120V or 230V inputpower without hesitation and automatically switches to link up to the availablepower input.Part Number Description PriceTDC 1-3840 CUTMASTER™ TRUE™ Series 39 Air Plasma Cutting System 1,316.00

115/230 Volt, 1 PhaseWith 75° Radnor® MasterCut MC60Hand TorchWith 20' Leads

TDC 1-3820 CUTMASTER™ 38 Air Plasma Cutting System 1,045.00115/230 Volt, 1 PhaseWith SL60™ 75° Hand TorchWith 20' Leads -WHILE SUPPLIES LAST

F. Thermal Dynamics® CUTMASTER™ TRUE™

Series 52 Plasma Cutting SystemThermal Dynamics® CUTMASTER® TRUE™ Series 52 offers these basic truths:True Confidence- The CUTMASTER® TRUE Series microprocessor controlledfront panel LED’s assure extreme operator confidence and error free use fromsetup to clean up. True Strength- The CUTMASTER® TRUE Series allows you towork all day at our recommended cut capacity. But when you need that extrapunch, you can be confident that it’s there.Part Number Description PriceTDC 1-5140-1 CUTMASTER™ TRUE™ Series 52 Plasma Cutting System, 1,967.00

230 Volt, Single Phase, 60 Hertz With 75° Radnor®MasterCut MC60 Hand Torch And 20' Leads

TDC 1-5120-1 CUTMASTER™ 51 Manual Plasma Cutter 1,437.00230 Volts Single PhaseWith SL60® 75° Hand TorchWith 20' Leads -WHILE SUPPLIES LAST


B

A. PRO 130 MIG GunRadnor® PRO 130 - The perfect MIG gun for homeowners and small businesses.Designed for small MIGMachines from 100 to 180 amps, the Radnor® PRO 130will out perform any gun in class.Part Number Description PriceRAD 64002600 Radnor® Pro 130-10-3035 130 AmpMIG Gun 112.99

For .030" - .035" Wire With 10' Leads and Tweco® StyleConnector (Fits Some Lincoln®)

RAD 64002601 Radnor® Pro 130M-10-3035 130 AmpMIG Gun 114.99For .030" - .035" Wire With 10' Leads andMiller® Style Connector

RAD 64002602 Radnor® Pro 130FC-10-3545 Radnor® 130 Amp 112.99MIG Gun For .035" - .045" Flux CoredWireWith 10' Leadsand Tweco® Connection (Fits Some Lincoln®)

B. E71T-GS Flux Cored MIGWireE71T-GS is an all-position, single-pass, flux cored welding wire designed toweld carbon steel. The unique quality of this product is that you do not have touse a shielding gas. E71T-GS produces smooth arc action, low spatter, full slagcoverage, and easy slag removal. The bead appearance is not equal to agas-shielded product, but the benefits of not having to use gas makes thisproduct extremely popular. E71T-GS operates on DC straight polarity (DCEN).*Make sure your power source is set properly for a good, non-porous weld.Part Number Description Wire Dia. PriceRAD 64001400 2 Pound Spool E71T-GS .030" 19.36RAD 64001402 10 Pound Spool E71T-GS .030" 62.59RAD 64001406 2 Pound Spool E71T-GS .035" 17.85RAD 64001408 10 Pound Spool E71T-GS .035" 61.32

A

6

C

C. PRO 250 MIG GunRadnor® PRO 250 - The ideal MIG gun for spray and pulse spray applications.Versatile and economical enough to fit all welding needs for 200 to 300 ampwelding machines.Part Number Description PriceRAD 64002607 Radnor® Pro 250-15-3035 250 AmpMIG Gun 158.99

For .030" - .035" Wire With 15' Leads and Tweco®

Style ConnectorRAD 64002608 Radnor® Pro Model 250-15-4045 250 AmpMIG Gun 158.99

For .040" - .045" Wire With 15' Leads and Tweco®

Style ConnectorRAD 64002610 Radnor® Pro 250M-15-3035 250 AmpMIG Gun 163.99

For .030" - .035" Wire With 15' Leads andMiller®/Tweco®





Style ConnectorRAD 64002614 Radnor® Pro 250L-15-3035 250 AmpMIG Gun 158.99

For .030" - .035" Wire With 15' Leads and Lincoln®/Tweco®

Style ConnectorRAD 64002615 Radnor® Pro 250L-15-4045 250 AmpMIG Gun 158.99

For .040" - .045" Wire With 15' Leads and Lincoln®/Tweco®

Style Connector

MIG

Guns

andFlux

CoredWire




F

A. Tweco® Style 11 Series Contact TipsPerfect replacement contact tips for Radnor® Pro 130, Tweco® Mini, Lincoln100L and Tweco Style MIG guns up to 180 Amps. 25 tips per bulk pack, pricedper tip.Part Number Description Wire Dia. PriceRAD 64002664 11-30 MIG Tip (Bulk Pack) .030" 0.46RAD 64002667 11-30 MIG Tip (5 pack) .030" 3.89RAD 64002651 11-35 MIG Tip (Bulk Pack) .035" 0.46RAD 64002668 11-35 MIG Tip (5 pack) .035" 3.89RAD 64002652 11-45 MIG Tip (Bulk Pack) .045" 0.46RAD 64002669 11-45 MIG Tip (5 pack) .045" 3.89

B. Tweco® Style 14 Series Contact TipsPerfect replacement contact tips for 200 Amp to 400 Amp Tweco® Style andLincoln MIG guns. 25 tips per bulk pack, priced per tip.Part Number Description Wire Dia. PriceRAD 64002665 14-30 MIG Tip (Bulk Pack) .030" 0.45RAD 64002671 14-30 MIG Tip (5 pack) .030" 3.79RAD 64002654 14-35 MIG Tip (Bulk Pack) .035" 0.45RAD 64002672 14-35 MIG Tip (5 pack) .035" 3.79RAD 64002655 14-45 MIG Tip (Bulk Pack) .045" 0.45RAD 64002673 14-45 MIG Tip (5 pack) .045" 3.79

C. Tweco® Style 14H Series Heavy-Duty Contact TipsPerfect replacement contact tips for heavy-duty 200 Amp to 400 Amp Tweco®Style and Lincoln MIG guns. 25 tips per bulk pack, priced per tip.Part Number Description Wire Dia. PriceRAD 64002659 14H-35 HDMIG Tip (Bulk Pack) .035" 0.50RAD 64002676 14H-35 HDMIG Tip (5 pack) .035" 3.99RAD 64002660 14H-45 HDMIG Tip (Bulk Pack) .045" 0.50RAD 64002677 14H-45 HDMIG Tip (5 pack) .045" 3.99

D. Tweco® Style MIG Nozzles1⁄8" tip recess.Part Number Description Amps PriceRAD 64002686 Model 21-50 Self Insulated MIG Nozzle 100-180 9.89RAD 64002687 Model 22-50 Adjustable MIG Nozzle 200-250 3.49RAD 64002688 Model 22-62 Adjustable MIG Nozzle 200-250 3.59

E. Gasless MIGNozzle (Not Shown)Fits Radnor® Pro 130 and Lincoln 100LMIG Guns.Part Number Description Amps PriceRAD 64002734 Model K-1939-1 Gasless Nozzle 100-160 5.69

F. Tweco® Style 32 Series MIG Nozzle InsulatorAdjustable. For use with 250 AmpMIG guns.Part Number Description PriceRAD 64002680 Radnor® 32 MIG Nozzle Insulator 1.99

G. Tweco® Style Gas DiffusersPart Number Description Amps PriceRAD 64002731 35-50 Gas Diffuser 100-180 2.99RAD 64002723 52 Gas Diffuser 200-250 5.49

H. Gasless Nozzle KitRadnor® Gasless Nozzle Kit includes a 45-40-15 wire conduit, gasless nozzle andan 11-45 contact tip. This kit is specifically designed to fit the Radnor® Pro 130and Lincoln® 100LMIG guns.Part Number Description PriceRAD 64002733 Gasless Nozzle Kit For Radnor® Pro 130 and Lincoln® 100L 14.79

MIG Guns (Contains 1 Each, 15' Conduit, Gasless Nozzleand .045" Contact Tip)

RAD 64002737 Tweco® Style 45-40-15 .035" - .045" 15' Liner For 11.89Radnor® Pro 130FC Series MIG Gun

RAD 64002734 Model K-1939-1 160 Amp Gasless Nozzle For 5.69Radnor® Pro 130 and Lincoln® 100L MIG Guns

RAD 64002731 35-50 Gas Diffuser For Radnor® Pro 130 MIG Gun 2.99

I. Replacement MIG Gun LinersReplacement wire conduits (liners) for Radnor® and other popular Tweco® StyleMIG guns.Part Number Description Wire Dia. Amps PriceRAD 64002737 45-40-15 Liner .035"-.040" 100-180 11.89RAD 64002738 35-40-15 Liner .030"-.055" 100-180 11.29RAD 64002740 42-3035-15 Liner .030"-.035" 200-250 9.29RAD 64002742 42-4045-15 Liner .040"-.045" 200-250 9.29

A

B

C

D

MIG

GunConsum

ablesand

Liners

H

I

G

07 Metal Work 06_09.qxd:Layout 1 11/20/07 2:42 PM Page 7


Wel

ding

Fum

eEx

tract

ion

and

Arc

Goug

ing

A. Lincoln® Miniflex Portable Fume ExtractorLincoln Electric's newMiniflex is a portable, high vacuum, low volume systemspecifically designed for the removal and filtration of welding fumes. TheMiniflexexcels in performance, design and ease of handling. It can be completelydisassembled in a matter of minutes for cleaning and maintenance. With anautomatic start/stop function, the unit automatically turns on and off duringwelding. It can be used in confined spaces and other locations that are notaccessible with other welding fume extractors. And with its standard set ofwheels and optional wall-mounting bracket, it can be easily moved around orpositioned off the work floor, out of the welder's working space. Powered bytwo 1.2 HP motors, theMiniflex allows for sufficient extraction capacity underall conditions. In high mode, both motors are working at 100% capacity,extracting 135 CFM of air. In lowmode, both motors are working at 70% capacity,extracting 94 CFM of air. With both motors increasing and decreasing speed,the result is a continuously balanced systemwhich increases motor life andreduces noise level at 70-dB. TheMiniflex’s Five Stage Filtration process,including its primary LongLife-H® and secondary HEPA filters, offer abundantcapacity to handle most common light and medium duty arc weldingapplications - providing a filter efficiency up to 99.97%.Comes CompleteWith:

• 9' cord with 15 amp plug• 8' length X 1-3⁄4" OD extraction hose• LongLife-H® main filter• HEPA filter• 2 spare sets of carbon brushes and seals for motors

EN 20 Nozzle (sold separately)The optional EN 20 nozzle is designed for a wide array of welding applications.With its funnel extraction opening and magnetic mounting stand, it provides thewelder with versatility.Part Number Description PriceLIN K2376-1 Miniflex Portable Fume Extractor 1,199.00LIN K2389-5 Model EN 20 Fume Extraction Nozzle 138.99

B. Radnor® Pro4000 Heavy-Duty Air/Carbon Arc Gouging TorchThe Radnor® Pro4000 Heavy-Duty Gouging Torch has rugged construction fordurability and long life. The natural torch angle and light-weight minimizesoperator fatigue while the 360° swivel cable makes for less cable twist helpingwith operator comfort. Radnor® Pro4000 parts and cable assemblies areinterchangeable with the *Arcair® K-4000 gouging torch. Cables and hosesare made in USA.• Accepts Pointed Carbons from 5⁄32" to 1⁄2"• Accepts Flat Carbons from 3⁄8" to 5⁄8"• Rated to 1,000 AmpsMaximumPart Number Description PriceRAD 64002200 Radnor® Pro4000 Heavy Duty Gouging Torch 194.19

With 7' Cable (Replacement for Model 61-082-008)RAD 64002201 Radnor® Pro4000 Heavy Duty Gouging Torch 216.39

With 10' Cable (Replacement for Model 61-082-009)RAD 64002202 Radnor® Pro4000 Heavy Duty Gouging Torch 112.99

With No Cable (Replacement for Model 61-082-002)RAD 64002203 Radnor® 7' Cable Assembly For Pro4000 Gouging Torch. 119.99

For Radnor® Pro4000 and Arcair® K-4000 Gouging Torches.Use in place of Model 70-084-207.

RAD 64002204 Radnor® 10' Cable Assembly For Pro4000 Gouging Torch. 146.99For Radnor® Pro4000 and Arcair® K-4000 Gouging Torches.Use in place of Model 70-084-210.

*Arcair® is a registered trademark of Thermadyne Industries, Inc.

C. Radnor® Copper-Coated DC Air/Carbon Arc Gouging ElectrodesRadnor® Air Carbon Arc Gouging Electrodes are copper-coated and available inDC Pointed and Jointed in all common sizes. These versatile electrodes can beused in multiple positions and processes. Radnor® carbons have an extracoating of copper which improves electrical conductivity. (Sold by the box only).Part Number Description PriceRAD 64002222 3⁄16" X 12" Copper-Coated DC Pointed Carbon 10.69

Arc Gouging Electrode. Model 22-033-003. Box of 50.RAD 64002223 1⁄4" X 12" Copper-Coated DC Pointed Carbon 10.29



Arc Gouging Electrode. Model 22-063-003. Box of 50.RAD 64002233 1⁄2" X 12" Copper-Coated DC Jointed 104.99

Arc Gouging Electrode. Model 24-084-003. Box of 100.

B

C

LIN K2389-5

LIN K2376-1

A



A. Hougen® HMD115 3⁄4" Magnetic Drill With RotaLoc™The HMD115 is an ultra low profile, lightweight 21 lb drill with a quill feed arbor.Handles operate from either side and with handles removed, the hex headallows use of a socket wrench for ratcheting the feed. Handles lock forcarrying. The arbor has a bayonet-style twist and lock tool mounting for quickcutter change outs. The HMD115 uses Rotaloc™ Annular Cutters. For safety, themotor switch must be continuously pressed during operation and the motor willnot run without the magnet switch "ON". Rear mounted controls optimizeergonomics. Convenient carrying case and safety strap is standard.Part Number Description PriceHOU HMD115 Hougen® HMD115 3⁄4" Magnetic Drill With RotaLoc™, 769.00

Quick-Shank Mounting, Carry Case and Safety Strap,120V, 8 Amp, 50/60 Hz

B. Hougen® M42 High Speed Steel RotaLoc™ Annular CuttersRotaLoc™ Annular Cutters are designed for use exclusively in the HMD115 Ultra-Low Profile Truck Frame Drill. Made of M42 high speed steel and features StackCut geometry for penetrating multiple plates in a single pass, up to 3⁄4" depth ofcut. They have a bayonet style twist lock shank for fast tool change overrequiring no tools to install in the drill's arbor. For optimum cutter tool life andcutter efficiency use Slick-Stik™ lubricant.Part Number Description PriceHOU 17116 1⁄2" Diameter, 3⁄4" Depth Rotaloc™ Annular Cutter 36.99HOU 17118 9⁄16" Diameter, 3⁄4" Depth Rotaloc™ Annular Cutter 37.49HOU 17120 5⁄8" Diameter, 3⁄4" Depth Rotaloc™ Annular Cutter 39.69HOU 17122 11⁄16" Diameter, 3⁄4" Depth Rotaloc™ Annular Cutter 43.29HOU 17124 3⁄4" Diameter, 3⁄4" Depth Rotaloc™ Annular Cutter 41.59HOU 17126 13⁄16" Diameter, 3⁄4" Depth Rotaloc™ Annular Cutter 44.69HOU 17128 7⁄8" Diameter, 3⁄4" Depth Rotaloc™ Annular Cutter 43.89HOU 17130 15⁄16" Diameter, 3⁄4" Depth Rotaloc™ Annular Cutter 54.19HOU 17132 1" Diameter, 3⁄4" Depth Rotaloc™ Annular Cutter 55.99HOU 17134 11⁄16" Diameter, 3⁄4" Depth Rotaloc™ Annular Cutter 51.19

C. Hougen® HMD904 Magnetic DrillThe long-time standing HMD904 is the drill of choice for fabrication andconstruction. Made for down and dirty holemaking. The HMD904 coupledwith a variety of accessories, essentially gives you your own machine shop.The HMD904 uses Rotabroach 12,000-Series Cutters and comes with the liftdetection safety feature, eliminating the need for safety switch adjustments.Part Number Description PriceHOU HMD904 Hougen® HMD904 2" Magnetic Drill, 120 V, 8 Amp 50/60 Hz 839.00

D. Hougen® 12,000 Series M2 H.S.S Annular CuttersFor use with Hougen® Portable Magnetic Drills and many competitive models onmaterials up to 275 BHN. They are made of hardened high speed tool steel andare precision ground for excellent performance throughout the cut, and offerlong tool life. They require less horsepower and thrust to cut, and last muchlonger than traditional holemaking methods. Rotabroach® cutters feature a 3⁄4"diameter double-flatted shank and are available in 1" and 2" D.O.C. Rotabroach®

Cutters are resharpenable for extended tool life and lower cost per hole.Part Number Description PriceHOU 12114 7⁄16" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 24.99HOU 12116 1⁄2" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 27.39HOU 12118 9⁄16" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 29.69HOU 12120 5⁄8" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 31.89HOU 12122 11⁄16" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 33.89HOU 12124 3⁄4" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 33.89HOU 12126 13⁄16" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 36.49HOU 12128 7⁄8" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 40.89HOU 12130 15⁄16" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 41.49HOU 12132 1" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 43.69HOU 12134 11⁄16" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 46.99HOU 12136 11⁄8" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 55.19HOU 12140 11⁄4" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 57.29HOU 12144 13⁄8" Diameter, 1" Depth 12,000 Series H.S.S. Cutter 82.79HOU 12214 7⁄16" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 35.59HOU 12216 1⁄2" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 35.49HOU 12218 9⁄16" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 38.59HOU 12220 5⁄8" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 41.39HOU 12222 11⁄16" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 46.99HOU 12224 3⁄4" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 46.19HOU 12226 13⁄16" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 54.39HOU 12228 7⁄8" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 51.99HOU 12230 15⁄16" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 61.19HOU 12232 1" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 59.49HOU 12234 11⁄16" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 62.09HOU 12236 11⁄8" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 79.89HOU 12240 11⁄4" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 84.09HOU 12244 13⁄8" Diameter, 2" Depth 12,000 Series H.S.S. Cutter 97.39

C

B

D

E

E. Hougen® 12,000 Series PilotsThe pilot serves three functions when used with Rotabroach® cutters in aportable magnetic drill: 1) Locate the hole center point, 2) Initiate coolant flow tothe center of the tool, 3) Eject the slug at the end of the cut. Always use a sharppilot for best results.Part Number Description PriceHOU 10527 Pilot For 3⁄4" - 2 3⁄8" Cutters For 1" Thick Material 7.79HOU 10528 Pilot For 3⁄4" - 2 3⁄8" Cutters For 2" Thick Material 8.39HOU 10533 Pilot For 11⁄16" Cutters For 1" Thick Material 7.99HOU 10534 Pilot For 1⁄2" - 11⁄16" Cutters For 2" Thick Material 8.69

Magnetic

Drills,Cuttersand

Pilots

A



A. Bosch® 1806E 6" Electronic Angle GrinderBosch® Model 1806E, the largest small angle grinder in the line-up, whichboasts 12 amps and a 9,300 RPM motor. Advanced features such as a sealedlock on/lock off switch, Constant Response™ circuitry, kickback protection,restart protection, Service Minder™ brushes and epoxy-coated field windingscombined with the comforts of a vibration control side handle and tool-freeadjustable guard allow for extended periods of use.Part Number Description PriceBOS 1806E 6" Electronic Angle Grinder, 15 Amp, 9,300 RPM 139.99

B. Bosch® 1810PS/1810PSD 41⁄2" Angle GrindersBosch® Model 1810PS 41⁄2" Paddle Switch Grinder uses a locking paddle switchfor better operator comfort and control. Directed air flow diverts dust awayfrom the switch and vital components while the Constant Response™ circuitryprovides a soft-start and maintains a constant speed under load. Epoxy CoatedField Windings, Service Minder™ Brushes and spiral-bevel gears enable harduse and easy maintenance. Bosch® Model 1810PSD has a paddle switchwithout lock-on for safety.Part Number Description PriceBOS 1810PS 41⁄2" Angle Grinder with Lock-on Paddle Switch, 8 Amp, 11,000 RPM 83.99BOS 1810PSD 41⁄2" Grinder without Lock-on Paddle Switch, 8 Amp, 11,000 RPM 84.99

C. Bosch® 1811PS/1811PSD 5" Angle GrindersThe Bosch® 1811PS 5" Paddle Switch Grinder with lock-on for better operatorcomfort and control. It also boasts a vibration control handle that reducesvibration up to 60%, providing uncompromising comfort for extended periods ofwork. Bosch® Model 1811PSD has a paddle switch without lock-on for safety.Part Number Description PriceBOS 1811PS 5" Angle Grinder with Lock-On Paddle Switch, 9 Amp, 11,000 RPM 98.99BOS 1811PSD 5" Angle Grinder without Lock-On Paddle Switch, 9 Amp, 11,000 RPM 99.99

D. Bosch® 1821/1821D 5" Rat-Tail Angle Grinders, AC/DCBosch® Model 1821 5" Rat Tail Grinder is the best in its class and is the pro'sclear cut choice. This powerful and durable grinder has a 2-position vibrationcontrol handle and a rear handle trigger with lock-on/off switch for extendeduse applications. The epoxy-coated field windings, sealed switch, presicionspiral-beveled gears and Service Minder™ brushes keep your mind on the joband not tool maintenance. AC/DC capability extends the versatility of this toolby allowing field operation from alternative power sources, includingwelder/generators. The tool-free adjustable guard makes wheel changes quickand easy. Model 1821D has a no lock-on for safety. If you have been using the*Makita® 9005B grinder, you must try this new grinder from Boash®. You will beamazed at its power and versaility.Part Number Description PriceBOS 1821 5" Rat-Tail Angle Grinder with Lock-On Paddle Switch 134.99

9.5 Amp AC, 9.0 Amp DC, 11,000 RPMBOS 1821D 5" Rat-Tail Angle Grinder without Lock-On Paddle Switch 137.99

9.5 Amp AC, 9.0 Amp DC, 11,000 RPM

E. Skil® 9290-01 41⁄2" Angle GrinderSkil® Model 9290-01 41⁄2" Angle Grinder uses a powerful 6 amp motor for grinding,sanding and sharpening with ease. The heavy-duty metal gear housing addsdurability. The 9290-01 has a versatile quick release guard and a spindle lock forfast, easy wheel changes. The 2-position assist handle aids in comfort andcontrol.Part Number Description PriceBOS 9290-01 41⁄2" Skil® Angle Grinder, 6.0 Amp 11,500 RPM 34.79

F. Skil® 9330-01 41⁄2" Rat-Tail Angle GrinderSkil® Model 9330-01 41⁄2" Angle Grinder uses a powerful 6.5 amp motor forgrinding, sanding and sharpening with ease. The heavy-duty metal gear housingadds durability. The 9330-01 has a versatile quick release guard and a spindlelock for fast, easy wheel changes. The 2-position assist handle and rear handledesign aids in comfort and control for heavy-duty applications. Two powerswitches allow for easy barrel or rear handle operation.Part Number Description PriceBOS 9330-01 41⁄2" Skil® Rat-Tail Angle Grinder 6.5 Amp, 11,000 RPM 43.79

BB

DD

CC

AA

Angle Grinders

FF

EE

10



DD

CC

BB

AA

A. Metabo® W6-115 41⁄2" Angle GrinderThe Metabo® W6-115 41⁄2" Angle Grinder is an excellent choice for lightindustrial, field or the home workshop applications, with all the ruggedness ofit's big brothers in the Metabo® line-up at an economical price. The low profilealuminum housing and slim handle make it easy to maneuver and access hardto reach areas. The 2-position side handle helps maintain control.Part Number Description PriceMTB 60611420 Metabo® W6-115 41⁄2" Angle Grinder With Lock-On Switch 92.99

6.0 Amp, 11,000 RPM

B. Metabo® W7-115 Quick 41⁄2" Angle GrinderMetabo® Model W7-115 Quick 41⁄2" Grinder is packed full of features that makethis one of the most durable and easiest to use on the market. Double insulation,long lasting motor with winding protection grid and an aluminum die-casthousing ensure longevity even used in the harshest conditions. The toollessguard adjustment and spannerless wheel change system allow maximumusability in the field with the need for extra tools to lose.Part Number Description PriceMTB 600715420 Metabo® W7-115 Quick 41⁄2" Angle Grinder 129.99

8 Amp, 10,000 RPM,

C. Metabo® WPS7-115 Quick 41⁄2" Angle GrinderMetabo® Model WPS7-115 Quick 41⁄2" Grinder is packed full of features thatmake this one of the most durable and easiest to use on the market. Doubleinsulation, long lasting motor with winding protection grid and an aluminum die-cast housing ensure longevity even used in the harshest conditions. Thetoolless guard adjustment and spannerless wheel change system allowmaximum usability in the field.Part Number Description PriceMTB 606208420 Metabo® WPS7-115 Quick 41⁄2" Angle Grinder 129.99

8.0 Amp, 10,000 RPM

D. Metabo® WE14-150 Quick 6" Angle GrinderMetabo® Model WE14-150 Quick 6" Grinder is packed full of features that makethis one of the most durable and easiest to use on the market. Double insulation,long lasting motor with winding protection grid and an aluminum die-casthousing ensure longevity even used in the harshest conditions. The toollessguard adjustment and spannerless wheel change system allow maximumusability in the field. The E stands for Electronic. The WE14 has TachoConstamatic (TC) Full Wave Electronic Speed Stabilization, Electronic windingtemperature monitor and Power interruption feature that in the event of a poweroutage the tool will not restart automatically.Part Number Description PriceMTB 601451420 Metabo® WE14-150 Quick 6" Electronic Angle Grinder 217.99

With Locking Paddle Switch, 12 Amp, 9,000 RPM MTB 601452420 Metabo® WE14-150 Quick 6" Electronic Angle Grinder 217.99

With No Lock Paddle Switch, 12 Amp, 9,000 RPM

E. Radnor® Zirconia Alumina Flap DiscsRadnor® by Norton® Flap Discs - engineered for light stock removal, blendingand finishing - all-in-one application. They grind like a depressed center wheeland finish like a fibre disc - helping you reduce process time and lowering yourtotal grinding costs. The high-performance zirconia alumina abrasive producesa more aggressive cut and longer disc life - up to 30% longer life than aluminumoxide products. The durable, fiberglass back construction means less pressurecan be used for aggressive stock removal further enhancing the life of the disc.

Type 29For use at a 15° - 25° angle - best choice when speed is your primary consideration.Part Number Description Grit Max RPM PriceRAD 64000862 41⁄2" X 7⁄8" 40 Grit 15,000 4.29RAD 64000863 41⁄2" X 7⁄8" 60 Grit 15,000 4.29RAD 64000864 41⁄2" X 7⁄8" 80 Grit 15,000 4.29RAD 64000868 41⁄2" X 5⁄8" - 11 40 Grit 15,000 5.89RAD 64000869 41⁄2" X 5⁄8" - 11 60 Grit 15,000 5.89RAD 64000870 41⁄2" X 5⁄8" - 11 80 Grit 15,000 5.89Type 27 JumboFor use on flat surfaces - best choice for smooth finishes. Jumbo discs haveextra large flaps that last up to 40% longer than standard flap discs.Part Number Description Grit Max RPM PriceRAD 64000908 41⁄2" X 7⁄8" 40 Grit 15,000 6.39RAD 64000909 41⁄2" X 7⁄8" 60 Grit 15,000 6.39RAD 64000910 41⁄2" X 7⁄8" 80 Grit 15,000 6.39

EE

Angle Grinders and Flap Discs



BB

CC

AA

Grinding Discs and Cut-Off Wheels A. Type 27 Depressed Center Wheels

Radnor® Type 27 Depressed Center Wheels are designed to perform best withlow horsepower and electric grinders or where low pressure is used. Theircombination of quick stock removal and economical price make these wheelsthe perfect choice for metal fabrication work in the field or shop. Generalpurpose wheels are ideal for use on alloys, metals, steels and ferrous metals.Aluminum wheels are engineered to grind soft metals without loading.Grinding Wheels (General Purpose)Part Number Description Max RPM PriceRAD 64000702 41⁄2" X 1⁄4" X 5⁄8"-11 13,580 2.35RAD 64000703 41⁄2" X 1⁄4" X 7⁄8" 13,580 1.55RAD 64000710 5" X 1⁄4" X 5⁄8"-11 12,225 2.49RAD 64000711 5" X 1⁄4" X 7⁄8" 12,225 2.27Cutting Wheels (Cutting & Cleaning Root Pass Welds)RAD 64000704 41⁄2" X .125 X 5⁄8"-11 13,580 2.09RAD 64000705 41⁄2" X .125 X 7⁄8" 13,580 1.49Combo Wheels (Cutting-Off, Notching, Light Grinding)RAD 64000705 41⁄2" X 1⁄8" X 5⁄8-11 13,580 1.49RAD 64000723 41⁄2" X 1⁄8" X 7⁄8" 13,580 1.47RAD 64000726 5" X 1⁄8" X 5⁄8-11 12,225 2.45RAD 64000727 5" X 1⁄8" X 7⁄8" 12,225 1.95Grinding Wheels (Aluminum)RAD 64000732 41⁄2" X 1⁄4" X 7⁄8" 12,225 4.79RAD 64000733 41⁄2" X 1⁄4" X 5⁄8" - 11 12,225 5.89

B. Small Diameter Reinforced Cut-Off WheelsThese wheels provide consistent performance at a competitive price.Reinforced to provide safety, strength and straight cuts on portable machines,they are extra thin for fast cutting action and minimal kerf loss.Type 1 - Straight Cut-Off Wheels - Right Angle GrinderPart Number Description Max RPM PriceRAD 64000806 41⁄2" X .040" X 7⁄8" 13,580 1.37RAD 64000810 6" X .040" X 7⁄8" 10,185 1.75Type 27 - Depressed Center Cut-Off Wheels - Right Angle GrinderRAD 64000812 41⁄2" X .045" X 7⁄8" 13,580 1.69RAD 64000813 5" X .045" X 7⁄8" 12,225 1.75RAD 64000814 6" X .045" X 7⁄8" 10,190 2.07Type 1 - High Speed Cut-Off Wheels - Straight Shaft GrinderAdvanced formulation for faster free cutting and excellent cut rate through hard materials.RAD 64000786 3" X .035" X 1⁄4" 25,465 1.29RAD 64000787 3" X .035" X 3⁄8" 25,465 1.29RAD 64000790 3" X 1⁄16" X 3⁄8" 25,465 1.19RAD 64000797 4" X .035"X 3⁄8" 19,100 1.57RAD 64000801 4" X 1⁄16" X 3⁄8" 19,100 1.69

C. Large Diameter Cut-Off Wheels For Chop SawsRadnor® Chop Saw Wheels use a quality aluminum oxide abrasive for fast cuttingat an economical price. Designed for stationary chop saws, these wheels arenon-binding and deliver burr- and burn-free cuts.General Purpose Chop Saw WheelRapid Cut, Centrally Reinforced, Rough SidesPart Number Description Max RPM PriceRAD 64000752 14" X 3⁄32" X 1" 4,365 6.29Steel Stud Chop Saw WheelThin, Side-Reinforced, Quality Aluminum Oxide AbrasiveRAD 64000753 14" X 3⁄32" X 1" 4,365 6.29



AA

CC

BB

Part Number Description Model Qty/Pk Price Application

RAD 64000501 10 TPI, 6" x 3/4" x 0.035" Bi-Metal Shatter-Resistant Reciprocating Saw Blade 610R 5 9.29 Nail-embedded wood, composition materials & plastics.Pipe, carbon steel, stainless steel: 1/8" - 1/4". Non-ferrousmetal: 1/8" - 1/2" thick.RAD 64000506 10 TPI, 8" x 3/4" x 0.050" Bi-Metal Shatter-Resistant Reciprocating Saw Blade 810R 5 11.29

RAD 64000502 14 TPI, 6" x 3/4" x 0.035" Bi-Metal Shatter-Resistant Reciprocating Saw Blade 614R 5 9.29 Pipe, structural steel, stainless steel: 3/32" - 1/4". Non-ferrous metal: 3/32" - 3/8".RAD 64000511 14 TPI, 6" x 3/4" x 0.035" Bi-Metal Shatter-Resistant Reciprocating Saw Blade B614R 25 39.99

RAD 64000503 18 TPI, 6" x 3/4" x 0.035" Bi-Metal Shatter-Resistant Reciprocating Saw Blade 618R 5 9.29

Structural steel, pipe, conduit, stainless steel: 1/16" - 3/16" thick. Non-ferrous metal: 1/16" - 5/16".

RAD 64000512 18 TPI, 6" x 3/4" x 0.035" Bi-Metal Shatter-Resistant Reciprocating Saw Blade B618R 25 39.99

RAD 64000507 18 TPI, 8" x 3/4" x 0.035" Bi-Metal Shatter-Resistant Reciprocating Saw Blade 818R 5 11.29


RAD 64000504 24 TPI, 6" x 3/4" x 0.035" Bi-Metal Shatter-Resistant Reciprocating Saw Blade 624R 5 9.29All metals less than 1/8" thick; tubing, conduit, trim.


RAD 64000505 6 TPI, 6" x 3/4" x 0.050" Bi-Metal Shatter-Resistant Reciprocating Saw Blade 656R 5 10.29 Fast cutting, roughing-in work & nail-embedded wood.

Bench Cut-Off Machine, Reciprocating Saw

s and Blades

A. 14" Benchtop Abrasive Cutoff MachineBosch® Model 3418 14" Benchtop Abrasive Cutoff Machine (Chop Saw) boastssuperior power with extra protection for fast efficient cuts. With 15 amps and a3,900-RPM motor with ball and roller bearings and helical cut gears. It's capablefor hard all-day use. When flexibility and accuracy are important look no further.Armed with a locking vise with quick-release, a 0-45° adjustable fence,adjustable depth-stop, and lock-on trigger, fast and accurate cuts can be madeall day long.Part Number Description PriceBOS 3814 3814 14" Benchtop Chop Saw 15 Amp, 4HP, 3,900 RPM 184.99

B. RS5 9 Amp 11⁄8" Variable Speed Reciprocating SawBosch® Model RS5 11⁄8" Reciprocating Saw has a 360° scroll collar to get intotight areas. A quick-change blade system allows the user to change blades withno tools. The variable speed trigger, soft grip boot and saw hook make the RS5easy to use and handy when not in use. The pivoting shoe and 360° scroll collarhelp make this saw versatile.Part Number Description PriceBOS RS5 RS5 Variable Speed Reciprocating Saw 11⁄8", 9 Amp 99.99

(Includes carrying case and all purpose blade)

C. RS10 12 Amp 3⁄4" Variable Speed Reciprocating SawBosch® Model RS10 3⁄4" Reciprocating Saw is as easy to use. The lockjaw bladechange system, swivel power cord base, soft-grip boot and variable speedtrigger give the user comfort and confidence. 12 amps of power and a Brutedrive wobble system make this one tough and durable saw.Part Number Description PriceBOS RS10 RS10 Variable Speed Reciprocating Saw 3.4",12 Amp 144.99

(Includes carrying case, all purpose blade and heavy metal blade)

Bi-Metal Reciprocating Saw BladesRadnor® Bi-Metal Reciprocating Saw Blades are engineered to cut stronger, faster and lastlonger. These blades are shatter resistant meaning they bend and flex to resist breaking. Theunique blade geometry positions the blade for optimum cutting performance.



B

D

C

F

E

H

G

A

AirC

ompres

sora

ndTo

ols

A. 3⁄8" Heavy Duty Air Ratchet Wrench3⁄8" Heavy Duty Air Ratchet Wrench is based on the industry’s most popularratchet, the 107XPA delivers an extra measure of durability with an advancedhead design, plus a host of other features.Part Number Description PriceIRT 107XPA Model 107XPA 3⁄8" Heavy Duty Air Ratchet Wrench 79.99

B. 3⁄8" Super Duty Air Impact WrenchTremendous power and longer life make this wrench the popular choice ofprofessional mechanics for exhaust systems, air conditioning, radiator, bodyshop, and bench work. Still the most powerful 3⁄8" pistol-grip on the market, itoffers all the advantages of the Single Hammer Impact Mechanism forremoving and replacing bolts up to 7⁄16" without a struggle.Part Number Description PriceIRT 212 Model 212 3⁄8" Super Duty Air Impact Wrench 149.99

C. 1⁄2" Drive Titanium Duty Air Impact WrenchThe Titanium 2135Ti delivers 1,000 ft.-lbs. of Nut Busting Torque in a gun thatweighs just 3.95 pounds. The 7-vane power plant drives enough torque to breakaway a nut tightened to over 1,000 ft.-lbs. in under six seconds.Part Number Description PriceIRT 2135TI Model 2135TI 1⁄2" Titanium Duty Air Impact Wrench 269.99

D. Heavy Duty Air Angle Die GrinderWhen a straight tool isn't practical for working in confined areas, this is theeconomical die grinder with a right angle head to use. It's compact and well-designed for grinding, porting, polishing, deburring and breaking sharp edges.Part Number Description PriceIRT 302A Model 302A Heavy Duty Air Angle Die Grinder 119.99

E. Heavy Duty Air Die GrinderA durable yet economical choice offering longer life and higher free speed at25,000 rpm. A general purpose tool designed for porting, light weld grinding, andbreaking sharp edges.Part Number Description PriceIRT 308A Model 308A Heavy Duty Air Die Grinder 77.99

F. 41⁄2" Super Duty Air Angle GrinderThe 3445 is the perfect choice for high performance finishing. This 41⁄2" Airangle grinder combines a unique motor controller that virtually eliminatesoverspeeding...with a powerful 8 hp motor to provide plenty of power for rustand material removal.Part Number Description PriceIRT 3445 Model 3445 41⁄2" Super Duty Air Angle Grinder 174.99

G. Pistol Grip Needle Scaler KitIngersoll Rand heavy-duty needle scalers are used to remove rust, weld splatterand slag, paint and other unwanted surface deposits. Also use for peening,cleaning sand castings, marine repairs and maintenance and a variety of otherapplications on any surface. Kits come with 1⁄2" shank chisel holder, 3 needlepacks and 3 chisels.Part Number Description PriceIRT 180PGKIT Model 180PG Pistol Grip Needle Scaler Kit 469.99

H. Electric-Driven Two Stage Reciprocating Air CompressorDesigned for heavy shop or industrial use, Ingersoll-Radnor Two-Stage electricair compressors provide the quality and performance that are ideal for mostapplications and users. The durable cast-iron, two-stage design offers extendedpump life for years of trouble-free service. These light industrial workhorsesoffer 100% continuous duty for tough applications. Value packaged compressorsinclude mounted and wired starter, automatic start/stop pressure switchcontrol, manual drain and ASME coded tank. Add a start up kit to provide allthe products needed to maintain your compressor for one year, including AllSeason Select® lubricant and replacement filter elements. When purchasedwith the compressor it extends the warranty to two years (pump only).Part Number Description PriceIRC 32499352 Model 2475N7.5 Air Compresspr 7.5 HP Value Packaged 1,983.99

80 gal Vertical Tank, 175 PSIMax. Operating PressureIRC 32305880 All Season Start Up Kit 2340/3475 91.99



A

D

B

A. Radnor® Bi-Metal Hacksaw BladesRadnor® Bi-Metal hacksaw blades are shatter resistant and the bi-metalconstruction allows for improved flex. TUFF TOOTH™ design eliminatestooth strippage.Part Number Description Bulk Packed PriceRAD 64000524 12" X 1⁄2" X 18 TP Style B218 10/pk 14.99RAD 64000525 12" X 1⁄2" X 24 TP Style B224 10/pk 14.99RAD 64000526 12" X 1⁄2" X 32 TP Style B232 10/pk 15.99RAD 64000527 12" X 1⁄2" X 18 TP Style B218 100/pk 119.99RAD 64000528 12" X 1⁄2" X 24 TP Style B224 100/pk 119.99RAD 64000529 12" X 1⁄2" X 32 TP Style B232 100/pk 119.99

B. Lenox® 12" High Tension Professional HacksawThe 4012 Hacksaw frames heavy-duty cast aluminum handle and steel crossbarare the perfect balance of light weight and super strength. This rugged framecan tension a hacksaw blade to 30,000 psi, which is about twice that of ordinaryframes, providing the user with straight, fast cutting.Part Number Description PriceAMT 20918 Model 4012 12" High Tension Professional Hacksaw Frame 22.99

C. Radnor® Industrial BrushesUse for dirt, rust and scale removal frommetal surfaces; cleaning and scaleremoval from pipe threads and metal castings; weld preparation and cleaning;weld scale, slag and spatter removal.Curved Handle Brushes

No. of Block Brush Trim pPart Number Material Rows Size Part Length PriceRAD 64000434 Steel 3 x 19 14" x 1" 5 1⁄2" 1 3⁄16" 1.69RAD 64000438 Stainless 3 x 19 14" x 1" 5 1⁄2" 1 3⁄16" 3.29

Weld Cleaning/Inspection BrushesHandle No. of Block Trim p

Part Number Material Material Rows Size Length PriceRAD 64000448 Stainless Wood 3 x 7 7 1⁄2" x 1⁄2" 1⁄2" 1.89RAD 64000450 Stainless Plastic 3 x 7 7 1⁄2" x 7⁄16" 1⁄2" 1.49

Acid BrushesOverall Trim p

Part Number Material Width Length Length Packaged PriceRAD 64000457 Horsehair 3⁄8" 5 3⁄4" 3⁄4" 6/Pk 1.89

Crimped Wire Cup BrushTrim Wire Arbor Max

Part Number Material Diameter Length Size Hole RPM PriceRAD 64000338 Steel 23⁄4" 7⁄8" 0.014” 5⁄8"-11 UNC 14,000 11.29

Knot Style Cup BrushTrim Wire Arbor Max

Part Number Material Diameter Length Size Hole RPM PriceRAD 64000346 Steel 23⁄4" 7⁄8" 0.014" 5⁄8"-11 UNC 14,000 11.29

Stringer Bead Twist Wheel BrushFace Wire Arbor Max

Part Number Material Diameter Width Size Hole RPM PriceRAD 64000378 Steel 4" 3⁄16" 0.020" 5⁄8"-11 UNC 20,000 9.59

D. LENOX® Gold™ Quick Change Retractable Utility KnifeThe Lenox® Gold™ Quick Change Retractable Utility Knife has an extremelydurable stainless steel nose that is titanium coated which resists spreading andlengthens wear. The quick blade change system requires no tools and allowsrotation or changing of the blade without opening the handle. There is storagefor up to 5 Lenox® Gold™ blades (3 are included).Part Number Description PriceAMT 20353 Lenox® Gold™ Quick Change Utility Knife With Retractable Blade 12.99AMT 20350 Lenox® Gold™ Titanium Edge Utility Knife Blade (priced as pk of 5) 2.29

Hacksaw/Blades,IndustrialBrushes,Utility

Knifeand

Blades

C

RAD 64000438

RAD 64000450

RAD 64000338

RAD 64000457

RAD 64000434

RAD 64000346 RAD 64000378



B

C

F

A

Welding

Chem

icals A. Solvent-Based Anti-Spatter

Amethylene chloride and soya lecithin based formulation with a CO2 propellantthat provides a heavy-duty, uniform coating on MIG nozzles, tips, fixturesand piece parts to prevent weld spatter build up. Radnor® solvent-basedanti-spatter is non-flammable, quick drying and heat resistant for hightemperature applications.Part Number Description PriceRAD 64000100 Solvent Based Anti Spatter 16 oz Aerosol Can 3.69RAD 64000102 Solvent Based Anti Spatter 24 oz Aerosol Can 5.09

B. Standard and PremiumWater-Based Anti-SpatterAll products are non-toxic, biodegradable, environmentally safe and they donot contain silicones or chlorinated solvents. Radnor water-based anti-spattersprovide a uniform coating when applied to MIG nozzles, tips, fixtures and pieceparts to prevent weld spatter build-up. They are easy to clean up, and due totheir non-toxicity, are a great choice for extended use in confined spaces.Premium version uses a higher solids content and dimethyl either as a propellantwhile the standard versions uses nitrogen propellant and lower solids formula.Part Number Description PriceRAD 64000110 StandardWater Based Anti Spatter 16 oz Aerosol Can 3.69RAD 64000111 PremiumWater Base Anti Spatter 141⁄2 oz Aerosol Can 4.09

C. Nozzle GelNozzle gel protects and prolongs the life of MIG nozzles and tips and isnon-toxic and non-flammable with no silicones or hydrocarbons.Part Number Description PriceRAD 64000120 Nozzle Gel 16 oz Jar 4.49

D. Zinc-Rich Cold Galvanizing SprayRadnor® Zinc-Rich Cold Galvanizing Coating provides superior zinc protectionon welds, galvanized steel, base iron and other surfaces exposed to harsh andcorrosive environments. Leaves a dark gray matte finish.Part Number Description PriceRAD 64000130 Cold Galvanizing Compound 16 oz Aerosol Can 6.29

E. Leak Test SolutionRadnor® oxygen compatible leak test regular can be used on all pressurized gassystems including oxygen, acetylene, propane, butane, LPG. Product certifiedammonia free, will not promote stress cracking in Pressure Relief Devices(PRD’s). Feature 12" pull out extension tube, allows product to be applied directlyto leak source. For use in 27°F to 200°F temperature range.Part Number Description PriceRAD 64000136 Regular Temperature Leak Test Solution 8 oz 3.69

F. Wire Lube Pads And SolutionRadnor® pre-treated wire lube pads reduce wire feed friction and improveweld process. Easy to use pads clip on wire feed unit quickly. For aluminumapplications use Radnor® untreated pads. Pads can be re-lubricated when dryto the touch using Radnor® wire lube pad lubricant, specially formulated tore-generate Radnor® pads. Pads are color-coded for easy identification,pre-treated pads are red in color, untreated pads are white. Use untreatedpads with aluminumwire.Part Number Description PriceRAD 64000144 TreatedWire Lube Pads (Sold as 6 per pack) 7.29RAD 64000145 UntreatedWire Lube Pads (Sold as 6 per pack) 6.49RAD 64000146 Wire Lube Pad Lubricant 8 oz 5.19

D

E



Welding

SupportEquipmentand

Markers

A

D

C

F

B

A. MIG Nozzle ReamerManufactured from the finest quality materials for long life. Will not roll whenset horizontally.Part Number Description PriceRAD 64002338 MIG Nozzle Reamer 13.99

B. MasterGage™ Weld Fillet GageThe high quality stainless steel (304) blades resist rust for longer life. Permitsquick and accurate measuring of the most popular convex or concave weldfillet sizes in standard and metric: 1⁄8" - 1" (3.2 - 25.4 mm). The blades are deburredfor fine and smooth edges with all sizes and numerals laser etched into thesurface. Comes with a vinyl pocket case with snap lock.Part Number Description PriceRAD 64002356 Model MG-11Weld Fillet Gage 20.49

C. Half-Round Bastard FileRadnor® Half-Round Bastard File is manufactured from the finest materials forlong life and is excellent for use in shaping and dressing steel and castings.Part Number Description PriceRAD 64000613 12" Half-Round Bastard File 5.49RAD 64000614 14" Half-Round Bastard File 6.99

D. Felt Tip Paint MarkerRadnor® Felt Tip Paint Markers utilize a valve operation to dispense fast-drying,high gloss enamel paint for permanent marking, lettering, coding and numberingof both interior and exterior surfaces. The markers are easy to use andconvenient to carry in your pocket. Precision action of the valve accuratelymeters flow so the right amount of paint passes through the long-lasting,replaceable fiber tip. Width of mark is approximately 1⁄8".Part Number Description Replacement For PriceRAD 64002391 White Felt Tip Paint Marker FPWHMC, 96800 3.29

E. Solid Paint MarkersRadnor® Solid Paint Markers are solid sticks of high-quality enamel paint thatmake marking smooth, fast and easy. The Solid Paint Marker marks a 5⁄16" lineand is protected by an unbreakable plastic case and can be conveniently carriedin your pocket. The plastic case prevents the paint from drying out so it alwayswrites easily and smoothly. Great for plasma cutting – marks under water.Part Number Description Replacement For PriceRAD 64002392 White Solid Paint Marker SPWHSC 3.29RAD 64002393 Yellow Solid Paint Marker SPYESC 3.29

F. Metal Marker In A BottleRadnor® Metal Ball Point Markers feature durable aluminum tubes with non-clogging, tough, case-hardened steel points and precision 440 stainless steelballs. These handy markers utilize a specially formulated polyurethane paintand will write in any position: horizontal, vertical and overhead. Marks are fastdrying. Metal Markers are available in a tube or handy, refillable, unbreakableplastic bottle.Part Number Description Replacement For PriceRAD 64002394 White Metal Marker In Bottle MBWHMC, 84600 4.49

E



C

A

RAD 64000623

RAD 64000621

RAD 64000622

RAD 64000624

B

RAD 64000606

RAD 64000608

RAD 64000609

D

RAD 64002000RAD 64002008

RAD 64002016

RAD 64002006

RAD 64002017

RAD 64002010

RAD 64000617

RAD 64000616

RAD 64000615

RAD 6400020

RAD 6400019

RAD 6400018

Mag

nets

,Cla

mps

and

Chip

ping

Ham

mer

s A. Mag Tool™ HoldersTheseMag Tool™ Holders are designed to work as an extra hand enablingfast and accurate fit up of ferrous parts. Holds sheet and tube at angles of45°, 90° and 135°. Do not use close to DCwelding current to maintain fullmagnetic properties.Part Number Description PriceRAD 64000621 Model M-060 Small Mag Tool Holder 4.79RAD 64000622 Model M-061 MediumMag Tool Holder 5.69RAD 64000623 Model M-063 Large Mag Tool Holder 11.29RAD 64000624 Model M-065 Extra Large Mag Tool Holder 21.99

B. Locking Pliers and ClampsRadnor® Locking Pliers and Clamps are designed for specific uses to hold partsin proper alignment. The wide opening jaws close and lock positively with onehand and release easily with an easy-release trigger. A micro-adjusting screwis used for pre-adjusting and repeatable clamping.Part Number Description PriceRAD 64000606 6R Style 6" Locking C-Clamp 6.99RAD 64000608 8R Style 8" Locking Sheet Metal Tool 9.69RAD 64000609 9R Style 9" LockingWelding Clamp 11.99RAD 64000611 11R Style 11" Locking C-Clamp 11.99

C. Heavy-Duty Drop-Forged C ClampsRadnor® Heavy-Duty, Drop-Forged C-Clamps feature a rugged, heavy-duty dropforged steel frame that offers extra throat depth for more versatility to meetyour clamping needs. The steel spindles are copper plated for weld spatterprotection and are capped with swivel pads that adjust freely to place evenpressure on the clamped part. The laquered finish is for added toughness andthe storage box keeps the clamp looking and working like new.Part Number Description PriceRAD 64000615 Model 402P 2" Heavy Duty Drop Forged C Clamp 7.99RAD 64000616 Model 404P 4" Heavy Duty Drop Forged C Clamp 20.99RAD 64000617 Model 406P 6" Heavy Duty Drop Forged C Clamp 26.99RAD 64000618 Model 408P 8" Heavy Duty Drop Forged C Clamp 33.99RAD 64000619 Model 410P 10" Heavy Duty Drop Forged C Clamp 44.99RAD 64000620 Model 412P 12" Heavy Duty Drop Forged C Clamp 59.99

D. Chipping HammersRadnor® Chipping Hammers are manufactured under a rigid quality and safetycontrol program. The hammer heads are hardened to precisely controlledtemperatures for durability and strength. The wide-blade design and long,slender cones remove slag faster and extends tool life. The handles are wellbalanced for ease of use.Part Number Description PriceRAD 64002000 Model WH-20Wood Handle Chipping Hammer 10.99

With Cone and Chisel, Hickory HandleRAD 64002006 Model A Coil Handle Chipping Hammer 9.99

With Chisel and BrushRAD 64002008 Model H Coil Handle Chipping HammerWith Cone and Chisel 4.99RAD 64002010 Model WH-30Wood Handle Chipping Hammer 10.99

With Cone and Chisel, Hickory HandleRAD 64002016 Model G Coil Handle Chipping HammerWith Cone and Chisel 4.99RAD 64002017 Genuine Hickory Replacement Handle for 4.29

WH Series Chipping Hammers


GasEquipm

entandAccessories

A

D

F

E

B

RAD 64003574 RAD 64003579

C

A. Victor® Style 250 Series Medium-Duty Single Stage RegulatorsRadnor® 250 Series, Medium-Duty Single Stage Regulators are recommendedfor applications where slight delivery pressure increases due to decreasingcylinder pressures would not affect the performance characteristics of the workof test results. Features 13⁄4" diaphragm and 2" gauges. Three year warranty.Part Number Description CGA Gas Service PriceRAD 64003030 Model 250-510 510 Acetylene 69.99RAD 64003031 Model 250-540 540 Oxygen 69.99RAD 64003032 Model 250-300 300 Acetylene 71.99

B. Harris® Style 25 Series Medium-Duty Single Stage RegulatorsThe Radnor® by Harris® Model 25 Series Medium-Duty Regulator is thetraditional workhorse. Features include one-piece encapsulated seat designwith an internal filter and a PTFE teflon seat, chrome-plated bonnet with brassadjusting screw for smooth adjustment, forged brass body and 2" dual scalegauges. Three year warranty.Part Number Description CGA Gas Service PriceRAD 64003058 Model 25-15C-300 300 Acetylene 71.99RAD 64003059 Model 25-15C-510 510 Acetylene 69.99RAD 64003060 Model 25-50C-510P 510 Ag Fuel/Propane 69.99RAD 64003061 Model 25-100C-540 540 Oxygen 69.99

C. Victor® Style Medium-Duty Heating NozzleMulti-flame heating head for heat treating, straightening and priming. Eachnozzle has its own built-in spiral mixer, designed for the tip size and flamecharacteristic. Use with Acetylene gas only.Part Number Description PriceRAD 64003742 6-MFA-1 Medium-Duty Heating Nozzle 52.99RAD 64003746 8-MFAMedium-Duty Heating Nozzle 94.99RAD 64003747 10-MFAMedium-Duty Heating Nozzle 94.99

D. Cylinder Wall Bracket With ChainRadnor® CylinderWall Brackets are designed to hold cylinders firmly and safelyin place. The rugged steel construction is powder coated and comes ready toinstall complete with holding chain. Will accomodate 7"-91⁄2" cylinders and whenproperly installed will meet insurance requirements by eliminating the hazardsof loose cylinders.Part Number Description PriceRAD 64003560 Model WB100C Single Cylinder Steel Wall Bracket with Chain 20.79RAD 64003561 Model WB200C Double Cylinder Steel Wall Bracket with Chain 32.79

E. Stationary Cylinder StandThe Radnor® Stationary Cylinder Holder is designed to hold cylinders when wallmounts cannot be used. The rugged steel construction is powder coated andwill accomodate 7"-91⁄2" cylinders. These are safe to use in labs, shops or anyplace with firm level ground. When used properly it meets insurancerequirements for storage of loose cylinders.Part Number Description PriceRAD 64003562 Model CS79 7-91⁄2" Stationary Cylinder Stand 57.79

F. Cylinder CartsSeries 100 CartsThese carts are strong and compact in design; having excellent balance androllability. Recommended for small shops and garages having hard surfacefloors. All models have a cylinder hold chain and hose supports.Series 300 CartsThe Radnor 300 Series is the most popular and versatile large cylinder truck.The continuous handle gives the truck frame more rigidity while the high floorclearance while being moved makes it ideal for construction jobs or largeshops. Comes equipped with a bolt on tool box and cylinder hold chain.Part Number Description PriceRAD 64003574 Model 106T-21 Cylinder Cart With Semi Pneumatic Wheels 57.79

and Tool BoxRAD 64003579 Model 142-86 Cylinder Cart With Solid Rubber Wheels 126.79

With Ball BearingsRAD 64003581 Model 314-27 Continuous Handle Cylinder Cart 159.79

with Semi Pneumatic Wheels With Ball Bearings

19

RAD 64003581




A. Victor® Style Deluxe Medium-Duty Welding and Cutting OutfitsVictor® Style medium-duty outfits feature quality engineered componentsdesigned to cover the full range of welding, cutting and heating needs.With features like built-in flashback arrestors, reverse flow check valves andeasy-to-read 2" gauges on regulators with T bar adjusting knobs, set-up andease of use are unmatched. Cuts to 5" and welds to 11⁄4". Three year warranty.Part Number Description CGA PriceRAD 64003004 Radnor® Model 250-510DLX 510 204.99RAD 64003006 Radnor® Model 250-300DLX 300 207.49

B. Victor® Style Deluxe Heavy-Duty / Extra-Heavy-DutyWelding and Cutting Outfits

Victor® Style heavy-duty and extra-heavy-duty outfits feature quality engineeredcomponents designed for the rigors of tough job sites. With features like built-inflashback arrestors, reverse flow check valves and easy-to-read 21⁄2" gauges onregulators with T bar adjusting knobs, set-up and ease of use are unmatched.Cuts to 6" and welds to 3". Three year warranty.Part Number Description CGA PriceRAD 64003008 Radnor® Model 350-510DLX Heavy-Duty 510 294.99RAD 64003010 Radnor® Model 350-300DLX Heavy-Duty 300 297.49RAD 64003026 Radnor® Model 450-510DLX Extra HD 510 329.99RAD 64003027 Radnor® Model 450-300DLX Extra HD 300 334.99

C. Victor® Style ToteIdeal cutting, welding and brazing outfit for plumbing, HVAC and other light-duty,portable applications. Unique carry tote offers in-line balanced design forcarrying ease. As supplied, cuts to 1⁄2" and welds to 1⁄4"; with larger tips andcylinders, cuts to 4" and welds to 11⁄4". Three year warranty.Part Number Description CGA PriceRAD 64003012 Radnor® Tote w/o Cylinders 200 249.99RAD 64003013 Radnor® Tote With 20’ Oxygen 200 364.99

and MC Acetylene Cylinders

D. Harris® Style Steelworker® Classic Medium-DutyWelding and Cutting Outfits

The Radnor® by Harris® oxy-acetylene Steelworker® is ideal for repair,maintenance and metal fabrication needs and will cut to 4" and weld to 1⁄2".The alternate fuel version can cut to 5" and weld to 1⁄2". The Steelworker®features a 3 year warranty on the regulators.Part Number Description CGA PriceRAD 64003018 Model 8525-300DLX Deluxe Oxy-Acetylene 510 207.49RAD 64003025 Model 8525F-510P Deluxe Fuel Gas 510 214.99

E. Harris® Style Pipeliner® Heavy-DutyWelding and Cutting OutfitsRadnor® by Harris® Pipeliner® outfits come complete with regulators, torchhandle with reverse flow check valves, cutting attachment, cutting tip andwelding tip with mixer. The Radnor® by Harris® oxy-acetylene Pipeliner® cutsto 6" and welds to 1" while the alternate fuel version cuts to 5" and welds to 1".The Pipeliner® features a 3 year warranty on the regulators.Part Number Description CGA PriceRAD 64003020 Model 43425-510 Deluxe Oxy-Acetylene 510 294.99RAD 64003021 Model 43425-300 Deluxe Oxy-Acetylene 300 297.99RAD 64003024 Model 43425F-510P Deluxe Fuel Gas 510 299.99

B

D

C

A

Gas

Wel

ding

and

Cutti

ngOu

tfits

E


21

A. Jomac® Cotton/Kevlar® Terry Cloth Gloves• Seamless cotton/Kevlar®blended terry cloth• Loop out terry cloth with knitwrist• Designed for superior cut and abrasion protection providing heatresistance to 225°F

• Ambidextrous• Sold per pairPart Number Description Size PriceWLA 9000 Cotton/KEVLAR® Terry Cloth Large 2.79

B. Jomac® ExtraHeavyweight Brown&White Terrycloth Gloves• High loop exterior terry cloth is used in extra heavyweight gloves as anatural insulator

• Handling temperatures up to 450°F for lined and 350°F for unlined gloves• Available in 21⁄2" safety cuff or 41⁄2" gauntlet cuff styles• Sold per pairPart Number Description Size PriceWLA 644HR Unlined Safety Cuff XLarge 4.39WLA 636HR Unlined Gauntlet Cuff XLarge 4.99WLA 644HRL Lined Safety Cuff XLarge 7.29WLA 636HRL Lined Gauntlet Cuff XLarge 8.29

C. Whizard® MetalGuard® Heavyweight Gloveswith Reinforcement• MetalGuard® yarn and Kevlar®, provides an unparalleled resistanceto cuts and abrasions

• Minimum of three times more cut resistant and five times more abrasionresistant than comparable weight Kevlar® knit gloves

• Innovative yarn composition and thumb reinforcement significantly extendsservice life, lowering overall cost

• Ideal for metal stamping, fabricating and handling and glass handling• Prewashed, preshrunk gloves can be laundered or dry cleaned• Made in the USA• ANSI Level 5• Sold per pairPart Number Description Hem Color Size PriceWLA 1880S MetalGuard® Heavyweight Yellow Small 7.89WLA 1880M MetalGuard® Heavyweight Blue Medium 7.89WLA 1880L MetalGuard® Heavyweight White Large 7.89WLA 1880XL MetalGuard® Heavyweight Orange XLarge 7.89

HandProtection


A

B

C

D E

F

D. NSA Thermobest™ Heat Gloves and Mitts• 22 oz. heat gloves and mitts are constructed of a Kevlar® blend materialwith a 15 oz. reverse wool liner

• Good abrasion resistance and amaximum heat resistance of 800°F• Goldenbest™ cuff and both glove and mitt measure 14" in length• Mitt is fully reversible to extend the life• Made in USA• Sold per pairPart Number Description Size PriceN33 G51TCGH14072 Thermobest™ Glove Large 25.19N33M11TCRH14 Thermobest™ Mitt Large 21.29

E. NSA Thermobest™ Glovewith Aluminized Carbon Kevlar® Back• Thermobest™ 22 oz. Kevlar® blend with a Norbest 913™ 13 oz. aluminizedcarbon Kevlar®

• Protect against radiant heat and molten metal splash• Special heavy 13 oz. reversed Fonda wool lining for comfort• 14" length with a winged thumb• Made in USA• Sold per pairPart Number Description Size PriceN33 G64TCSR1401 Aluminized Kevlar® Large 38.09

F. Tillman™ Welding Back Hand Pads550 Hand Pad- Standard Double Layer Protection• Aluminized carbon Kevlar® top• Vermiculite coated fiberglass bottom• Leather and elastic straps• 71⁄2"H x 53⁄4"W550X Hand Pad- Economy Double Layer Protection• Aluminized rayon top• Acrylic coated fiberglass bottom• Leather and elastic straps• 71⁄2"H x 53⁄4"WPart Number Description PriceTIL 550 Welding Back Hand Pad 4.19TIL 550X Welding Back Hand Pad 3.29


D

22

Hand

Protec

tion

F. Tillman™ Top Grain Elk Welders Gloves• Long lasting top grain elk back and palm construction offers superiorcomfort and performance

• Elk molds to the shape of hands and stays softer under high heat conditions• Naturally resistant to oils and moisture• 14" gloves feature cotton/foam lining on the back of the glove for added heatresistance and an unlined palm to maximize dexterity

• Cuffs are stiff cowhide to avoid rolling down or bunching up• Glove fingers are welted and sewnwith KEVLAR® thread to protect seams• Straight thumb design is best for gripping and is reinforced for longer wear• Added pull tab for additional protection and helps in removing glove• Available in pearl or gold color• Sold per pairPart Number Description Size PriceTIL 850L Golden 14" Elk Welders, Carded Large 16.59TIL 850XL Golden 14" Elk Welders, Carded Xlarge 16.59TIL 750L Pearl 14" Elk Welders, Carded Large 14.69TIL 750XL Pearl 14" Elk Welders, Carded Xlarge 14.69

E. Radnor® Premium Side Split Cowhide InsulatedWelders Gloves with Double Reinforced Thumb

• Premium side split cowhide• Cotton/foam lining for moisture absorption and heat resistance orcold weather use

• KEVLAR® sewn for added strengthwith fully welted fingers to protectstitching from burn and abrasion

• Double reinforced wing thumb gives extra protection on key thumb stressarea to maximize wear

• Sold by the pair or left hand onlyPart Number Description Size PriceRAD 64057663 Blue 14" Premium Insulated, Carded Medium 7.39RAD 64057661 Blue 14" Premium Insulated, Carded Large 7.39RAD 64057665 Blue 14" Premium Insulated, Left Hand Only Large 3.59RAD 64057664 Blue 14" Premium Insulated, Carded XLarge 7.39RAD 64057656 Brown 14" Premium Insulated, Carded Large 7.39RAD 64057680 Black 14" Premium Insulated, Carded Large 7.39RAD 64057685 Red 14" Premium Insulated, Carded Large 7.39


A

B

C

E

F

A. Radnor® Economy Shoulder Split CowhideWelders Gloves• Economy grade shoulder split cowhide• Wing thumb, cotton lining, cotton stitching and fully welted fingers• Sold per pairPart Number Description Size PriceRAD 64057690 Economy 14" Welders Large 2.59

B. Radnor® Select Shoulder Split CowhideWelders Gloves with Reinforced Thumb

• Select shoulder split cowhide welders• Features reinforced straight thumb for added protection and strength• Cotton lined for comfort and moisture absorption• KEVLAR® sewn for added strength and heat resistance with fully weltedfingers to protect stitching from burn and abrasion

• Sold per pair or left hand onlyPart Number Description Size PriceRAD 64057626 Brown Slightly Select 14" Welders, Carded Large 5.29RAD 64057631 Brown Select 14" Welders, Carded Large 6.09RAD 64057633 Brown Select 14" Welders, Left Hand Only Large 2.89

C. Radnor® Premium Side Split CowhideWeldersGloves with Reinforced Thumb

• Premium shoulder split cowhide• Double reinforced straight thumb adds strength where stress is most common• Cotton lined for comfort and moisture absorption• KEVLAR® sewn for added strength and heat resistance with fully weltedfingers to protect stitching from burn and abrasion

• Pull tab provides easy donning andextra protectionwhendragging awelding gun• Sold per pair or left hand onlyPart Number Description Size PriceRAD 64057636 Brown 14" PremiumWelders, Carded Large 7.69RAD 64057638 Brown 14" PremiumWelders, Left Hand Only Large 3.69

D. Radnor® Slightly Select Shoulder Split CowhideInsulatedWelders Gloves with Reinforced Thumb

• Select shoulder split cowhide welders• Cotton/foam lining for moisture absorption and heat resistance orcold weather use

• KEVLAR® sewn for added strengthwith fully welted fingers to protectstitching from burn and abrasion

• Reinforced wing thumb protects high stress area for added durability• Sold by the pair or left hand onlyPart Number Description Size PriceRAD 64057646 Brown 14" Slightly Select Insulated, Carded Large 5.29RAD 64057648 Brown 14" Slightly Select Insulated, Carded, Left HandOnly Large 2.49RAD 64057641 Blue 14" Slightly Select Insulated, Carded Large 5.29RAD 64057643 Blue 14" Slightly Select Insulated, Left Hand Only Large 2.49



Carded gloves feature hang tag for display.

HandProtection

StraightThumb4" Cuff

A. Tillman™ Premium Top Grain Kidskin TIGWelders Gloves• Premium pearl top grain kidskin• Superior feel, dexterity and wearability• Sewn with heat-resistant KEVLAR® thread for tough durability• Straight thumb design allows for optimum gripping of TIG guns• Choose either 2" or 4" cuff lengths• Sold per pairPart Number Description Size PriceTIL 24DS Kidskin TIGWelders, 2" Cuff, Carded Small 9.69TIL 24DM Kidskin TIGWelders, 2" Cuff, Carded Medium 9.69TIL 24DL Kidskin TIGWelders, 2" Cuff, Carded Large 9.69TIL 24DXL Kidskin TIGWelders, 2" Cuff, Carded XLarge 9.69TIL 24CS Kidskin TIGWelders, 4" Cuff, Carded Small 10.09TIL 24CM Kidskin TIGWelders, 4" Cuff, Carded Medium 10.09TIL 24CL Kidskin TIGWelders, 4" Cuff, Carded Large 10.09TIL 24CXL Kidskin TIGWelders, 4" Cuff, Carded XLarge 10.09

B. Tillman™ Deerskin Split Leather TIGWelders Gloves• Deerskin split leather offers a snug and soft fit• Heat-resistant KEVLAR® stitching and straight thumb design• 2" or 4" cuff length• Sold per pairPart Number Description Size PriceTIL 25AS Deerskin TIGWelders, 2" Cuff, Carded Small 6.29TIL 25AM Deerskin TIGWelders, 2" Cuff, Carded Medium 6.29TIL 25AL Deerskin TIGWelders, 2" Cuff, Carded Large 6.29TIL 25AXL Deerskin TIGWelders, 2" Cuff, Carded XLarge 6.29TIL 25BS Deerskin TIGWelders, 4" Cuff, Carded Small 6.69TIL 25BM Deerskin TIGWelders, 4" Cuff, Carded Medium 6.69TIL 25BL Deerskin TIGWelders, 4" Cuff, Carded Large 6.69TIL 25BXL Deerskin TIGWelders, 4" Cuff, Carded XLarge 6.69

C. Radnor® Premium Grain Goatskin MIG/TIGWelders Gloves• Premium grade grain goatskin with 4" blue split leather gauntlet cuff• Sewn with KEVLAR® thread for super-strong heat resistance• Enhanced dexterity and softness for less hand fatigue• Wing thumb• Sold per pairPart Number Description Size PriceRAD 64056447 Goatskin MIG/TIGWelders Medium 5.59RAD 64056448 Goatskin MIG/TIGWelders Large 5.59RAD 64056449 Goatskin MIG/TIGWelders XLarge 5.99

D. Tillman™ Heavyweight Top Grain Pigskin MIGWelders Gloves• Heavyweight top grain pigskin MIG welders for excellent protection in wetand oily welding conditions

• Extra strong KEVLAR® seams have the maximum number of stitchespossible per inch

• Straight thumb provides the best gun grip and 4" cuff length adds protection• Sold per pairPart Number Description Size PriceTIL 32S 14" Pigskin MIGWelders, Carded Small 8.09TIL 32M 14" Pigskin MIGWelders, Carded Medium 8.09TIL 32L 14" Pigskin MIGWelders, Carded Large 8.09TIL 32XL 14" Pigskin MIGWelders, Carded XLarge 8.09

E. Radnor® Side Split Leather PalmWork Gloves• Side split leather offers outstanding durability resulting from agreater density of fibers

• Duck canvas back with reinforced leather knuckle strap, pull tab,full index finger and fingertips

• Full feature gunn cut with wing thumb• Sewnwith super-strong heat resistant KEVLAR® thread toprevent wear-through

• Sold per pairPart Number Description Size PriceRAD 64057558 Side Split Leather Palm- Knitwrist Large 2.29RAD 64057560 Side Split Leather Palm- Safety Cuff Small 2.39RAD 64057561 Side Split Leather Palm- Safety Cuff Medium 2.39RAD 64057562 Side Split Leather Palm- Safety Cuff Large 2.39RAD 64057563 Side Split Leather Palm- Safety Cuff XLarge 2.49RAD 64057564 Side Split Leather Palm- Safety Cuff 2XLarge 2.49RAD 64057568 Side Split Leather Palm- Gauntlet Cuff Large 2.59RAD 64057569 Side Split Leather Palm- Gauntlet Cuff XLarge 2.69RAD 64057570 Side Split Leather Palm- Gauntlet Cuff 2XLarge 2.69

F. North Grip-N® Hot MillNitrile Coated Gloves

• Knit design allow hands to breathe,unlike cut and sewn hot mills

• Nitrile N-Coating on palm providesexcellent grip and longer life

• Provides protection against intermittent heat up to 400°F• Steamproof version has three layer design with the middle layerproviding resistance to steam

• Sold per pairPart Number Description Size PriceNOS 51/7146 N-Coated, Knitwrist Men’s 3.09NOS 51/7146SP N-Coated Steamproof, Knitwrist Men’s 4.09

A B

C D

E

F



A. Sperian Bull Dog™ Gloves• 7 cut, standardweight, 100% DuPont™Kevlar® liner• Full leather palm and reinforced thumb crotch• Complete protection with leather wrapped between fingers• Cut and abrasion protection in an economically priced style• Sold per pairPart Number Description Size PricePER KV18-45 Sperian Bull Dog™ Men’s 8.79

B. Sperian Top Dog Gloves• Shell of Kevlar® Armor® an engineered yarn of DuPont™Kevlar® andstainless steel, ANSI/ASTM cut level 4 for superior protection

• Premium leather palm is reinforced with DuPont™Kevlar® stitching foradded durability in wet or oily applications

• Reinforced thumb crotch extends the life of the gloves• Ideal for the paper and pulp industry, blade or glass handling, metalstamping and automotive or steel manufacturing

• Sold per pairPart Number Description Size PricePER KV18-55 Sperian Top Dog Men’s 16.89

C. Sperian Tuff-Coat II™ Gloves• 10 cut, mediumweight 100% Kevlar® knit shell• Blue natural latex rubber palm and fingertip coating provides cut, puncture,and outstanding abrasion resistance with a secure grip

• ANSI cut level 2• Ideal for handling sheet metal or glass, construction, light fabrication,shipping and receiving and general plant use

• Sold per pairPart Number Description Size PricePER KV300-S Sperian Tuff-Coat II™ Small 6.29PER KV300-M Sperian Tuff-Coat II™ Medium 6.29PER KV300-L Sperian Tuff-Coat II™ Large 6.29PER KV300-XL Sperian Tuff-Coat II™ XLarge 6.29

D. Best® Nitri-Flex® Kevlar® Gloves• Kevlar® knitted liner provides great cut resistance• Palm-dipped in nitrile, Nitri-Flex® Kevlar® delivers comfort and heavy-dutyabrasion and puncture resistance

• Ideal for applications involving shearing, metal fabrication and assembly,general construction, facility maintenance and warehouse jobs

• Sold by the pairPart Number Description Size PriceB13 4900-07 Nitri-Flex® Kevlar® Small 7.49B13 4900-08 Nitri-Flex® Kevlar® Medium 7.49B13 4900-09 Nitri-Flex® Kevlar® Large 7.49B13 4900-10 Nitri-Flex® Kevlar® XLarge 7.49

E. Best® Nitri-Flex® Ultimate Gloves• Breathable Kevlar®-Lycra® seamless stretch liner is ergonomicallydesigned for maximum comfort

• Flat-dipped, green nitrile coating features a textured grip for superior handlingand tactile sensitivity

• Abrasion and cut-resistance• Sold per pairPart Number Description Size PriceB13 5900-07 Nitri-Flex® Ultimate Small 5.09B13 5900-08 Nitri-Flex® Ultimate Medium 5.09B13 5900-09 Nitri-Flex® Ultimate Large 5.09B13 5900-10 Nitri-Flex® Ultimate XLarge 5.09

F. Best® ZorbIT™ Ultimate Gloves• Cut-resistantKevlar® fibersare spunwith super-stretchable,super-breathable Lycra®

• Sponge-nitrile coating• Ultimate grip in wet, oily and dry applications• Excellent cut and abrasion resistance• Sold per pairPart Number Description Size PriceB13 4560-07 ZorbIT™ Ultimate Small 4.69B13 4560-08 ZorbIT™ Ultimate Medium 4.69B13 4560-09 ZorbIT™ Ultimate Large 4.69B13 4560-10 ZorbIT™ Ultimate XLarge 4.69

Hand

Protec

tion

A

B

C

D E

F


G

25

HandProtection

andSleeves

E. HyFlex® CR2 Gloves• Features an innovative linerwith an optimal level of Dyneema®, Lycra® and nylon• Gray liner is combined with a polyurethane palm coating to ensure excellentdexterity and grip

• Ideal for glass and metal handling applications, even when slightly oily• Sold per pairPart Number Description Size PriceANE 11-627-6 HyFlex® CR2 6 7.59ANE 11-627-7 HyFlex® CR2 7 7.59ANE 11-627-8 HyFlex® CR2 8 7.59ANE 11-627-9 HyFlex® CR2 9 7.59ANE 11-627-10 HyFlex® CR2 10 7.59ANE 11-627-11 HyFlex® CR2 11 7.59

F. HyFlex® CR+ Gloves• Kevlar® Stretch Armor technology• HyFlex® CR+, featuring Intercept Technology™ is lightweight, supercut-resistant and flexible

• Palm dipped foam nitrile coating for superior wet and oil grip• Sold per pairPart Number Description Size PriceANE 11-501-6 HyFlex® CR+ 6 10.89ANE 11-501-7 HyFlex® CR+ 7 10.89ANE 11-501-8 HyFlex® CR+ 8 10.89ANE 11-501-9 HyFlex® CR+ 9 10.89ANE 11-501-10 HyFlex® CR+ 10 10.89

G. Metalist® Foam Gloves• Ergonomically designed for a natural, relaxed fit• Kevlar® woven into the high stress areas of the soft cotton liner• Flexible, foam nitrile coating provides added cut resistance and a sure gripon dry or oily surfaces

• A lightweight nitrile safety cuff protectswrist and forearm• Additional sizes available• Sold per pairPart Number Description Size PriceANE 28-507-9 Metalist® Foam 9 5.39ANE 28-507-10 Metalist® Foam 10 5.39

A

D E

F


A. GoldKnit® 100% Kevlar® String Knit Gloves• 100% Kevlar® string knit gloves are available in three weights• Designed to protect hands from sharp edges of metals, ceramics, glassand other materials

• Offers cut abrasion• Gloves are ambidextrous to help save in replacement costs• Sold per pairPart Number Description Size PriceANE 70-200-7 GoldKnit® Lightweight 100% Kevlar® 7 2.59ANE 70-200-8 GoldKnit® Lightweight 100% Kevlar® 8 2.59ANE 70-200-9 GoldKnit® Lightweight 100% Kevlar® 9 2.59ANE 70-200-10 GoldKnit® Lightweight 100% Kevlar® 10 2.59ANE 70-215-7 GoldKnit® Mediumweight 100% Kevlar® 7 3.69ANE 70-215-8 GoldKnit® Mediumweight 100% Kevlar® 8 3.69ANE 70-215-9 GoldKnit® Mediumweight 100% Kevlar® 9 3.69ANE 70-215-10 GoldKnit® Mediumweight 100% Kevlar® 10 3.69ANE 70-225-7 GoldKnit® Heavyweight 100% Kevlar® 7 6.29ANE 70-225-8 GoldKnit® Heavyweight 100% Kevlar® 8 6.29ANE 70-225-9 GoldKnit® Heavyweight 100% Kevlar®® 9 6.29ANE 70-225-10 GoldKnit® Heavyweight 100% Kevlar® 10 6.29

B. Kevlar® GoldKnit®100%Mediumweight Sleeves• 18" double-layered sleeves knitted from 100% Kevlar® fibers• Provide cut-resistance, flexibility and comfort and protects forearms fromminor heat and burn injuries

• Thumbslot prevents the sleeve from twisting, or is also available withoutthe thumbslot

• Sold individuallyPart Number Description PriceANE 70-128-18 18" Kevlar® Knit 2.69ANE 70-118-18 18" Kevlar® Knit with Thumb Slot 2.69

C. Assemblers 100 Kevlar® Sleeves• 100% Kevlar® interlock fabric that is as lightweight as it is breathable• High level of cut resistance, abrasion resistance and comfort• Knitwrist with thumbslot for additional protection in the palm and wrist• Sold individuallyPart Number Description PriceANE 59-408-22 22" Assemblers 100 Sleeve with Thumb Slot 7.99

D. HyFlex® CR Gloves• Stretch Kevlar® liner provides excellent resistance to cuts, nicks & abrasion• Foam nitrile coating channels away oil from the glove surface providinga secure grip

• Exceptional comfort, grip and dexterity• Black palm coating hides soil• Extended cuff offers extra cut protection around the wrist• Sold per pairPart Number Description Size PriceANE 11-500-6 HyFlex® CR 6 4.69ANE 11-500-7 HyFlex® CR 7 4.69ANE 11-500-8 HyFlex® CR 8 4.69ANE 11-500-9 HyFlex® CR 9 4.69ANE 11-500-10 HyFlex® CR 10 4.69ANE 11-500-11 HyFlex® CR 11 4.69

C

B



Hand

Protectio

nandErgonomic

Products

A. Valeo® Leather Mechanic’s Anti-Vibration GlovesThe sueded double leather palms of these gloves feature AVG® padding toabsorb vibration. Genuine leather in the palm and fingers enhance dexterity.The stretch knit padded backs and elastic cuffs with hook and loop closuresprovide long-wearing comfort. Sold per pair.Part Number Description Color Size PriceV14 GMLA-MD Mechanic’s Black Medium 10.09V14 GMLA-LG Mechanic’s Black Large 10.09V14 GMLA-XL Mechanic’s Black XLarge 10.09V14 GMLA-2XL Mechanic’s Black 2XLarge 10.09V14 GMLA-MD-TAN Mechanic’s Tan Medium 10.09V14 GMLA-LG-TAN Mechanic’s Tan Large 10.09V14 GMLA-XL-TAN Mechanic’s Tan XLarge 10.09V14 GMLA-2X-TAN Mechanic’s Tan 2XLarge 10.09

B. Valeo® Driver’s Anti-Vibration GlovesGenuine full grain leather Driver’s Anti-Vibration Gloves feature AVG® protectionin the thumb, palm and all fingers. Glove style incorporates a shirred elasticpull-on cuff. Tan. Sold per pair.Part Number Description Size PriceV14 GLAF-SM Driver’s Small 11.79V14 GLAF-MD Driver’s Medium 11.79V14 GLAF-LG Driver’s Large 11.79V14 GLAF-XL Driver’s XLarge 11.79

C. Valeo® VEL Industrial Back SupportTo prevent back injury, practice safe lifting techniques and give musclesadditional support by wearing this exclusive Industrial Back Support. Easy touse and comfortable to wear, the power mesh back makes this 9" wide supportlightweight and breathable. It features a double hook and loop closure, fivesupport stays and detachable adjustable suspenders. Machine washable. Usewaist measurement to determine size. Black.Part Number Description Size PriceV14 VEL-S Industrial VEL Back Support Small (26"-30") 11.39V14 VEL-M Industrial VEL Back Support Medium (30"-34") 11.39V14 VEL-L Industrial VEL Back Support Large (34"-38") 11.39V14 VEL-XL Industrial VEL Back Support XLarge (38"-42") 11.39V14 VEL-XXL Industrial VEL Back Support 2XLarge (42"-46") 11.39

D. Ergodyne® ProFlex® Rounded Cap Knee PadsRounded caps allow swiveling and pivoting during continuous on-the-groundjobs. Wicked™ treated 840D nylon fabric cover stands up to tough jobs while1⁄2" EVA padding provides firm, consistent support without bottoming out.Biomechanically designed contoured side cuts allow greater knee motion,and woven elastic straps with buckles or hook and loop closure adjust to anexact fit without collecting dust and grime. Knee Pads wipe clean with a dampcloth. Black with white. Sold per pair.Part Number Description Closure PriceE57 18301 ProFlex® 300 Rounded Cap Knee Pads Hook and Loop 12.49E57 18300 ProFlex® 300 Rounded Cap Knee Pads Buckle 11.29

E. Ergodyne® ProFlex® Slip-Resistant Cap Knee PadsSlip-resistant long rubber cap grips work surface while contoured side cutsallow greater knee motion and reduce binding. Covered inWicked™ treated840D nylon fabric, thick EVA foam offers support and protection. Durable buckleclosure easily fastens and stays free of dust and grime. Black. One size.Sold per pair.Part Number Description PriceE57 18335 ProFlex® 335 Slip-Resistant Cap Knee Pads 14.19

F. Valeo® NeopreneWrap-AroundWrist SupportThe universal sizedWSSWrap-AroundWrist Support is constructed of terry-lined vented neoprene with a nylon outer shell. A hook and loop closure keepssupport secure, and it is machine washable. One size fits most. Ambidextrous.Part Number Description Size PriceV14WSS WSSWrist Support Universal 3.19

G. Ergodyne® ProFlex® Elbow SupportDurable nylon-laminated neoprene forms the sleeve and keeps it from bindingand chafing. Long-lasting and comfortable, the support is designed for jobs thatrequire repetitive armmotion. For sizing, measure around largest part of forearm.Part Number Description Size PriceE57 16002 ProFlex® 500 Small (9"-10") 6.29E57 16003 ProFlex® 500 Medium (10"-11") 6.29E57 16004 ProFlex® 500 Large (11"-12") 6.29E57 16005 ProFlex® 500 XLarge (12"-13") 6.29

A

B C

D E

F G



A

27

50" Coat Front

A. Stanco INDURA® Ultra Soft® Coveralls9 oz. INDURA® Ultra Soft® full featured coveralls have an elastic waistband,by-swing back allowing full shoulder and armmovement, wide pass throughpocket openings with concealed snap, and concealed brass zipper frontclosure. They meet hazard/risk category 2 with an arc rating of 12.4 cal/cm2.Part Number Description Size Color PriceSTN US9681NB-L Level 2, 12.4 cal Coveralls Large Navy 72.49STN US9681NB-XL Level 2, 12.4 cal Coveralls XLarge Navy 72.49STN US9681NB-2XL Level 2, 12.4 cal Coveralls 2XLarge Navy 79.79

B. Stanco INDURA® Flame Resistant CoverallsThe INDURA® Coveralls are the ideal, comfortable choice for constant wear ina workplace where exposure to flame or other thermal sources is occasional.Contractor’s style coveralls feature an elastic waistband, zipper front closureand a variety of pockets. Available in orange(OR) or navy blue(NB). Specify colorand size when ordering.Part Number Description Size Color PriceSTN FRI-681 9 oz INDURA® Coveralls Small-XLarge Specify 51.39STN FRI-681 9 oz INDURA® Coveralls 2XLarge Specify 51.39

C. Stanco Nomex® IIIA Flame Resistant CoverallsContractor's style coveralls are constructed with a two-way brass zipper frontclosure with by-swing back. They feature a variety of pockets. The elasticwaistband provides a comfortable fit, while the five-thread safety stitchingprovides excellent durability. Available in navy blue(NB), orange(OR), or royalblue(RB). Choose standard 4.5 oz. Nomex® or heavyweight 6 oz. Nomex®.Specify color and size.Part Number Description Size Color PriceSTN NX4-681 4.5 oz Nomex® Coveralls Small-XLarge Specify 87.19STN NX4-681 4.5 oz Nomex® Coveralls 2XLarge Specify 87.19STN NX6-681 6 oz Nomex® Coveralls Small-XLarge Specify 106.99STN NX6-681 6 oz Nomex® Coveralls 2XLarge Specify 106.99

D. NSAAluminized Protective WearAluminized ProtectiveWear provides excellent protection from radiant heat.Constructed of 16 oz. Aluminized Acrysil, both the 30" jacket and the 50" coatfeature snap front and cuff. The Aluminized Acrysil Aprons feature leather strapwith slide snap. Both Aluminized Thermobest™ Legging and Spat have Velcro®

closure down the back. Made in USA.Part Number Description Size PriceN33 C17ASLG30 30" Aluminized 16 oz Acrysil Jacket Large 123.99N33 C17ASXL30 30" Aluminized 16 oz Acrysil Jacket XLarge 118.99N33 C17AS2X30 30" Aluminized 16 oz Acrysil Jacket 2XLarge 130.99N33 C17ASLG50 50" Aluminized 16 oz Acrysil Coat Large 157.99N33 C17ASXL50 50" Aluminized 16 oz Acrysil Coat XLarge 157.99N33 C17AS2X50 50" Aluminized 16 oz Acrysil Coat 2XLarge 172.99N33 A02AS24I36I Aluminized Acrysil 16 oz Bib Tie Apron 24" x 36" 32.69N33 A02AS24I48I Aluminized Acrysil 16 oz Bib Tie Apron 24" x 48" 41.79N33 L05TATALGVCX Aluminized Thermobest™ 19 oz Leggings Large 53.39N33 L05TATAXLVCX Aluminized Thermobest™ 19 oz Leggings XLarge 60.09N33 L09TATALGVCX Aluminized Thermobest™ 19 oz Spats Large 30.39

E. NSA Aluminized Norbest 913™ SleevesAluminized Norbest 913™ Sleeves, a blend of carbon and KEVLAR®, providesuperior protection from heat, sparks and molten metal splash. 18" length.Made in USA. Sold by the pair.Part Number Description Length PriceN33 S02NJ18I Sleeves 18" 43.09

F. NSA Aluminized Thermobest™ 19 oz. Fitted HoodThe KEVLAR®/fiberglass blend aluminized Thermobest™ 19 oz. Fitted Hood hasan adjustable ratchet suspension system and replaceable windowwith goldfilm to reflect heat. Made in USA.Part Number Description PriceN33 H58TARG Hood 237.99

C

F O R Y O U R S A F E T Y

The flame resistance of INDURA® Ultra Soft® isguaranteed for the life of the garment provided themanufacturer’s laundering instructions are followed.

ProtectiveClothing

FE

D

A/B

Bib Tie Apron



Protectiv

eClothing

All button snapsblack anodizedto prevent arcflashback

Convenientoutsidepocket forstorage

All seamsdouble lockstitchedwith Kevlar®

Underarm gussetallows for easiermovement

All stresspoints rivetreinforced

Adjustablesnaps at wrist

A B

All seamsdouble lockstitchedwith KEVLAR®

All stresspoints rivetreinforced

All buttonsnaps leatherreinforced

Soft, pliable, durableside split leather,specially tanned forheat resistance

Adjustablesnaps at wrist

Soapstonepocket oneach sleeve

All buttonsnaps blackanodized toprevent arcflashback

A. Leather Bib ApronBourbon brown Leather Bib Apron features crossed back straps for comfort,a side-release buckle for easy on/off, and two chest pockets.Part Number Description Size PriceRAD 64055140 Bib Apron 24" x 30" 16.09RAD 64055141 Bib Apron 24" x 36" 18.59RAD 64055142 Bib Apron 24" x 42" 19.89RAD 64055143 Bib Apron 24" x 48" 22.19

B. Leather Split Leg Bib ApronSplit Leg Bib Apron allows freedom of movement and excellent protectionwith bourbon brown leather. Crossed back straps provide comfort. Otherfeatures include a side-release buckle for easy on/off, two chest pockets andside-release buckles down the legs.Part Number Description Size PriceRAD 64055144 Split Leg Bib Apron 24" x 36" 19.29RAD 64055145 Split Leg Bib Apron 24" x 42" 21.39RAD 64055146 Split Leg Bib Apron 24" x 48" 23.69

D. Leather Cape Sleeve and BibDurable side split bourbon brown leather is specially tanned for heat resistance.Cape Sleeve seams are double lock-stitched with KEVLAR®, and snaps areblack anodized to prevent arc flashback. Cape Sleeve also features onesoapstone pocket on each sleeve, adjustable wrists, rust-resistant platedhardware and rivet-reinforced stress points. Snap attachment Bibs featurea side release buckle. Cape Sleeve and Bib sold separately.Part Number Description Size PriceRAD 64055071 Leather Cape Sleeve Medium 30.39RAD 64055072 Leather Cape Sleeve Large 30.39RAD 64055073 Leather Cape Sleeve XLarge 30.39RAD 64055074 Leather Cape Sleeve 2XLarge 33.49RAD 64055075 Leather Cape Sleeve 3XLarge 36.49RAD 64055079 Leather Bib – Fits Cape Sleeves Small-XLarge 14" 7.39RAD 64055085 Leather Bib – Fits Cape Sleeves Small-XLarge 20" 9.69RAD 64055091 Leather Bib – Fits Cape Sleeves Small-XLarge 24" 13.19RAD 64055080 Leather Bib – Fits Cape Sleeves 2XLarge-3XLarge 14" 8.09RAD 64055086 Leather Bib – Fits Cape Sleeves 2XLarge-3XLarge 20" 10.69RAD 64055092 Leather Bib – Fits Cape Sleeves 2XLarge-3XLarge 24" 14.49

CLeather Jacket

All hardwareplated toprevent rust

D Leather Cape Sleeve

All buttonsnapsleatherreinforced

All hardwareplated toprevent rust

C. Leather JacketSpecially tanned for heat resistance, this 30" Leather Jacket is made ofsoft, durable bourbon brown side split leather. KEVLAR® double lock-stitchedseams add heat resistance and strength. Underarm gussets allow freedom ofmovement while adjustable snaps at wrists and back customize fit. Featuresinclude convenient outside pocket, soapstone pockets on each sleeve, platedhardware to prevent rust, leather reinforced black anodized snaps and rivetreinforced stress points.Part Number Description Size PriceRAD 64055062 30" Leather Jacket Medium 53.29RAD 64055063 30" Leather Jacket Large 53.29RAD 64055064 30" Leather Jacket XLarge 53.29RAD 64055065 30" Leather Jacket 2XLarge 58.59RAD 64055066 30" Leather Jacket 3XLarge 63.89



A

ProtectiveClothing

B

C

21⁄4" Elastic Standard Elastic

D

Westex® Proban® FR7A® is designed for light-duty welding only and maintainsflame resistance for up to 50 homewashings at 145°F or 25 commercialwashings up to 165°F. Garments must be kept clean to ensure protection.

F O R Y O U R S A F E T Y

A. MediumWeight Leather/FR Cotton JacketA great combination of flame retardant cotton and side split leather for comfortand protection in one garment. Workers will appreciate the combination ofcotton and leather since it is cooler than wearing all leather. The body of the30” jacket is 9 oz. royal blue flame retardant 100% cotton, Proban® FR7A®.Jacket features an inside pocket for small items, soap stone pocket on eachsleeve, and anodized button snaps. Sleeves are made of premium quality sidesplit cowhide, specially tanned for heat resistance. Sleeve seams are doublelock-stitched with KEVLAR® thread. Wrist snaps are double leather reinforced.Part Number Description Size PriceRAD 64055161 30" Leather/FR Cotton Jacket Medium 30.19RAD 64055162 30" Leather/FR Cotton Jacket Large 30.19RAD 64055163 30" Leather/FR Cotton Jacket XLarge 30.19RAD 64055164 30" Leather/FR Cotton Jacket 2XLarge 33.19RAD 64055165 30" Leather/FR Cotton Jacket 3XLarge 36.19

B. Lightweight Flame Retardant Cotton JacketProtect workers from sudden flame exposure and light sparks. FR Jackets aremade ofWestex® Proban® FR7A® 100% cotton fabric. Proban® FR7A® is designedto self extinguish when exposed to flame or thermal ignition sources, anddesigned for light-duty welding only. The fabric will not shrink, melt or drip moltenresidues. Jackets are cool, comfortable and washable. Lightweight 9 oz. cotton.Part Number Description Size PriceRAD 64054961 30" 9 oz FR Cotton Jacket Medium 13.29RAD 64054962 30" 9 oz FR Cotton Jacket Large 13.29RAD 64054963 30" 9 oz FR Cotton Jacket XLarge 13.29RAD 64054964 30" 9 oz FR Cotton Jacket 2XLarge 14.59RAD 64054965 30" 9 oz FR Cotton Jacket 3XLarge 15.89

C. Flame Retardant Cotton Cape Sleeve & BibThe combined Cape Sleeve and Bib is designed for protection from sparksand flames on front of body, arms and shoulders, with back ventilation forlight-duty welding only. Anodized button snap closure. Made of 100% cotton9 oz. Proban® FR7A®. Cape Sleeve and Bib sold separately.Part Number Description Size PriceRAD 64054971 9 oz FR Cotton Cape Sleeve Medium 10.39RAD 64054972 9 oz FR Cotton Cape Sleeve Large 10.39RAD 64054973 9 oz FR Cotton Cape Sleeve XLarge 10.39RAD 64054974 9 oz FR Cotton Cape Sleeve 2XLarge 11.39RAD 64054975 9 oz FR Cotton Cape Sleeve 3XLarge 12.39RAD 64054979 9 oz FR Bib, Fits Cape Sleeves, Medium-XLarge 14" 2.89RAD 64054985 9 oz FR Bib, Fits Cape Sleeves, Medium-XLarge 20" 3.59RAD 64054991 9 oz FR Bib, Fits Cape Sleeves, Medium-XLarge 24" 5.19

D. Flame Retardant Cotton SleevesWestex® Proban® FR7A® flame retardant 100% cotton is designed for light-dutywelding only and will self extinguish when exposed to flame or thermal ignitionsources. The fabric will maintain its flame resistance for up to 50 homewashings. Sold per pair.Part Number Description Length PriceStandard Elastic at Both EndsRAD 64054950 9 oz FR Cotton Sleeves 18" 3.69RAD 64054952 9 oz FR Cotton Sleeves 23" 4.69Standard Elastic, Snap atWristRAD 64054951 9 oz FR Cotton Sleeves 18" 3.8921⁄4" Elastic at Both EndsRAD 64054953 9 oz FR Cotton Sleeves 18" 4.69RAD 64054954 9 oz FR Cotton Sleeves 23" 6.09


D

30

Head

and

Face

Prot

ectio

n

Headgear and Adapters

Cap & FaceshieldSold Separately

437 Capshield• All plastic, totally dielectic device for slotted caps• Curved plastic channel fits over the bill of thecap and includes pivoting blades which snapeasily into cap slots• Visors are secured with integral plastic lugsPart Number Description PriceJAC 3002444 437 Capshield 9.99

137 Capshield• Metal device for non-slotted caps• Curved aluminum channel and coilspring attachment

Part Number Description PriceJAC 3002445 137 Capshield 17.99

Faceshields• Ideal for 170SB headgear• Available in polycarbonate,propionate acetate and mesh steel• Larger sizes provide additionalprotection from top, bottom and sides• Meets ANSI Z87.1 Standard forsecondary eye protection except meshsteel which does not meet standard

Material ShapeImpact

ResistanceScratch

ResistanceHeat

Resistance Optics

Polycarbonate Molded/Sheet Best Better Best Best

Propionate Molded Better Good Good BetterAcetate Sheet Better Best Better Best

Faceshield Materials

Polycarbonate• Optical-grade .060" thick polycarbonate from extruded sheets or injectionmolded resin provides superior secondary impact protection and increasedscratch resistance• Clear, IR/UV 3.0, IR/UV 5.0Part Number Description Size PriceJAC 3002832 34-60 PC Clear (Molded) 151⁄2"x8"x.060 8.99JAC 3002813 34-63 IR/UV 3.0 151⁄2"x8"x.060 11.79JAC 3002810 34-65 IR/UV 5.0 151⁄2"x8"x.060 12.99

Propionate• Injection molded, .060” thick propionate offers outstanding impact resistanceand distortion-free optics• Clear and dark greenPart Number Description Size PriceJAC 3002843 915-60 Clear 151⁄2"x9"x.060 5.99JAC 3002831 915-63 Dark Green 151⁄2"x9"x.060 8.29

Acetate• High-grade cast sheet acetate available in .040" thickness protects againstdust, small particles, and chemical splash• Aluminum bound• Clear, light green and dark greenPart Number Description Size PriceJAC 3002847 8040 Clear 12"x8"x.040 3.59JAC 3002846 8042 Dark Green 12"x8"x.040 3.39JAC 3002848 34-40 Clear 151⁄2"x9"x.040 4.59JAC 3002817 34-41 Light Green 151⁄2"x9"x.040 6.59JAC 3002845 34-42 Dark Green 151⁄2"x9"x.040 6.39

40-Mesh Black Steel Screen• Not intended for impact protection- Does not meet ANSI standards• Apply over a faceshield to dissipate heating, preventing visor fromwarping inhigh heat applications

Part Number Description Size PriceJAC 3002812 40 Steel Screen 151⁄2"x9" 8.89

A. Fixed Front Welding GogglesRigid thermoplastic frame offers superiorheat and impact protection that fits easilyover glasses. Comes with a tough,Shade 5 polycarbonate lens. Comfort andprotection together with a contoured shapethat fits snug to keep out dirt and light with anadjustable elastic band to keep them firmly in place.

Part Number Description Size PriceRAD 64005086 Shade 5 Rigid Fixed Front Goggles 2" X 4" 6.69RAD 64005090 Shade 5 Fixed Front Goggles Soft Frame 2" X 4" 9.19

B. Lift-Front Welding GogglesSoft contoured vinyl frame fits snug toyour face and over eyeglasses. A toughpolycarbonate lens (Shade 5) is fitted to aneasy-to-use lift frame for maximum on-the-jobversatility. Hooded vents prevent fogging andoffer good ventilation.

Part Number Description Size PriceRAD 64005088 Lift-Front Soft Frame Goggles 2" X 4" 12.49


170SB Headgear• 170SB is ideal for usewith Jackson faceshields• 45 head size adjustments and fivecrown adjustments• Ratchet system eliminates backing offby the push and turn design• A lower ratchet strap offers addedcomfort and strength

Part Number Description PriceJAC 3002436 170SB Headgear 12.99

Faceshields

382 B Adapter• Easiest, least costly adapter• Mounts visors to slotted caps• Includes an integral spark deflector andpivoting blades• Visors secured with integral plastic lugsPart Number Description PriceJAC 3002441 382 B Cap Adapter 10.69

282 B Capmount Adapter• Mounts visor instantly on a wide variety ofnon-slotted caps with integral plastic lugs• Uses clips pressed over the cap rim for firmfit; removes with thumb pressure• Not to be used with caps that have slotswith rain troughs

Part Number Description PriceJAC 3002440 282 B CapMount Adapter 16.49

82 B Capmount Adapter• Quick detach brackets that join any visor andspark deflector with plastic pins to any capequipped with #87 mounting blades

Part Number Description PriceJAC 3002438 82 B CapMount Adapter 13.19JAC 3002435 Mounting Blades 2.79

C

AB

RAD 64005090

RAD 64005086



B. Super Cobra™ 24SS Autodarkening HelmetThe Radnor® Super Cobra™-24SS is the perfect welding helmet for generalpurpose stick, MIG and TIG from 10 amps. The Super Cobra™ is a single shade10.5 with a light state of 3. This is a great value with features including internaladjustments for sensitivity, delay/grind mode.Part Number Description Size PriceRAD 64005101 Super Cobra™ 24SS 2" x 41⁄4" 130.99

Features Cobra™ 24S Super Cobra™ 24SS Cobra™ 40Vi Cobra™ 45ViVViieewwiinngg AArreeaa 1-3⁄8 x "3-3⁄4" 1-3⁄8 x "3-3⁄4" 1-3⁄8 x "3-3⁄4" 1-7⁄8" x 3-7⁄8"FFiilltteerr DDiimmeennssiioonnss 2" x 4-1⁄4" 2" x 4-1⁄4" 90mm x 110mm 4-1⁄2" x 5-1⁄4"SShhaaddee Single Shade #10

Light State #3SingleShade #10.5Light State #3

Var Shade #9-13 (Ext Adj)Light State #4

Var Shade #7-14 (Ext Adj)Light State #3

UUVV//IIRR PPrrootteeccttiioonn ((LLiigghhtt oorr DDaarrkk)) Up to Shade #16 Up to Shade #16 Up to Shade #16 Up to Shade #16SSeennssiittiivviittyy AAddjjuussttmmeenntt No Internal Adjustment External Adjustment External AdjustmentGGrriinndd MMooddee No Internal Adjustment Internal Adjustment Internal AdjustmentDDeellaayy CCoonnttrrooll No Internal Adjustment Internal Adjustment Internal AdjustmentDDaarrkk ttoo LLiigghhtt DDeellaayy 0.2 seconds 0.1 or 2.0 seconds 0.1 or 2.0 seconds 0.1 or 2.0 secondsTTIIGG RRaattiinngg 40 amps 10 amps 5 amps 5 ampsSSwwiittcchhiinngg SSppeeeedd 1/2,000 1/2,000 1/10,000 1/10,000PPrriimmaarryy PPoowweerr SSuuppppllyy Solar Cell Solar Cell Solar Cell Solar CellBBaacckk--uupp PPoowweerr SSuuppppllyy Rechargeable Lithium Battery Rechargeable Lithium Battery Rechargeable Lithium Battery Rechargeable Lithium BatteryOOppeerraattiinngg//SSttoorraaggee TTeemmppeerraattuurree 14° to 148°F 14° to 148°F 14° to 148°F 14° to 148°FEEnncclloossuurree IInntteeggrriittyy Water and Dust Resistant Water and Dust Resistant Water and Dust Resistant Water and Dust ResistantWWaarrrraannttyy 2 years 2 years 2 years 2 years

A. Cobra™ 40Vi Autodarkening HelmetsThe Radnor® Cobra-40Vi is the perfect welding helmet for all weldingapplications including low amp TIG from 5 amps. The 40Vi features three arcsensors and has an infinite variable shade range from 9 to 13 with a light stateof 4. Outside command center has adjustments for shade selection andsensitivity. Internal adjustments for delay/grind mode.Part Number Description Size PriceRAD 64005150 Cobra™ 40Vi-Black 90mm x 110mm 149.99RAD 64005151 Cobra™ 40Vi-Blue 90mm x 110mm 149.99RAD 64005152 Cobra™ 40Vi-Jetstar 90mm x 110mm 157.99RAD 64005153 Cobra™ 40Vi-Speedway 90mm x 110mm 157.99RAD 64005154 Cobra™ 40Vi-Blaze 90mm x 110mm 157.99

C. Cobra™ 24S Autodarkening HelmetThe Radnor® Cobra™-24S is the perfect welding helmet for general purpose stickand MIG welding applications. Single shade 10 with a light state of 3. Notrecommended for TIG welding less than 40 amps.Part Number Description Size PriceRAD 64005100 Cobra™ 24S 2" x 41⁄4" 108.99

Welding Helm

ets and Accessories

A B C

Shade Selector Sensitivity Mode

SENSITIVITY, DELAY AND GRIND MODE D. Cobra™ 45Vi Autodarkening HelmetThe Radnor® Cobra-45Vi is the perfect weldinghelmet for all welding applications including lowamp TIG from 5 amps. The 45VI features a 30%larger viewing area and the widest infinite variableshade range from 7 to 14. Outside command centerhas adjustments for shade selection and sensitivity.Internal adjustments for delay grind mode.

RAD 64005104RAD 64005103

Part Number Description Size Price RAD 64005103 Cobra™ 45Vi-Black 41⁄2" x 51⁄4" 174.99RAD 64005104 Cobra™ 45Vi-Jetstar 41⁄2" x 51⁄4" 184.99


32

37

A

Hear

ing

Prot

ectio

n

37

37C

B

E

37

SmartFit ® Process Industry

A. Peltor® NEXT™ Nitro™ Disposable EarplugsCatch the attention of todays younger workforce with the explosive orange,pink, red and purple ultra-soft foam of Nitro™ Earplugs. Because of thisextremely soft formulation, Nitro™ Earplugs are the NEXT™ best thing to wearingno earplugs at all – except that they provide a noise jamming NRR of 32.Available with or without a LiveWire™ cord. Sold per box.Part Number Description Packaged PriceCAS P1000 Nitro™ Uncorded 200 pr/bx 15.59CAS P1001 Nitro™ Corded 100 pr/bx 18.99

B. Peltor® NEXT™ No-Touch™ Disposable Foam EarplugsPart of the NEXT™ generation of innovative earplugs, No-Touch™ soft purple foam plugs are fused with a LiveWire™ stem to provide easy, proper andhygienic insertion right out of the box. No roll down is required, and the stemeliminates foam contact with fingers. The tapered shape inserts easily, thenforms a canal-hugging seal for a NRR of 29. Available with or without LiveWire™cord. Sold per box.Part Number Description Packaged PriceCAS P2000 No-Touch™ Uncorded 100 pr/bx 28.99CAS P2001 No-Touch™ Corded 100 pr/bx 48.99

C. E-A-Rsoft® FX™ Disposable EarplugsHow can workers get the highest level of hearing protection with a comfortablefit? Choose E-A-Rsoft® FX™ Earplugs. Tests show that they provide the highestlevel of protection available from earplugs in the industry. Their custompolyurethane foam formulation is designed for slow recovery and superiorsoftness in the ear canal. In a plug-to-plug comparison, wearers said they wouldchoose FX™ Earplugs based on softness and best fit. NRR 33. Sold per box.Part Number Description Packaged PriceCAS 312-1261 E•A•Rsoft® FX™ Uncorded 200 pr/bx 17.99CAS 312-1274 E•A•Rsoft® FX™ Corded 100 pr/bx 18.99CAS 312-1260 E•A•Rsoft® FX™ Corded 200 pr/bx 37.99

D. Howard Leight® Max® Disposable EarplugsWorkers who need to block out loud noise demand the best protection andcomfort available in an earplug. That’s where Max® earplugs come in. Theworld’s most-used polyurethane earplug, Max® offers superior noise-blockingperformance in a single-use earplug. Its new enhanced contoured shape is easier to insert and resists backing out of the ear canal, while its softer foamdelivers superior long-wearing comfort – delivering solid performance that yourworkers can depend on. NRR 33. Sold per box. Part Number Description Packaged PriceHLI MAX-1 Max® Uncorded 200 pr/bx 19.99HLI MAX-30 Max® Corded 100 pr/bx 17.99

E. Howard Leight® Laser Lite® Disposable EarplugsThe bright idea in hearing protection. Its high visibility magenta and yellowcolors make compliance checks quick and easy. Laser Lite® has self-adjustingfoam which expands gently inside the ear canal for comfortable long-term wear,while its contoured T-shape delivers easy handling. NRR 32. Sold per box.Part Number Description Packaged PriceHLI LL-1 Laser Lite® Uncorded 200 pr/bx 17.99HLI LL-30 Laser Lite® Corded 100 pr/bx 18.99

F. Howard Leight® SmartFit® Reusable EarplugsThe only multiple-use earplug with Conforming Material Technology™, SmartFit®uses body heat to adapt to the shape of the ear canal for a comfortable,personalized fit. With a detachable cord system, HearPack® carry case andspecial application styles available, it’s the ultra-smart choice for todays diverseworkplace. NRR 25. Sold per box.Part Number Description Packaged PriceHLI SMF-30W-P SmartFit® Process Industry, Paper Bag 100 pr/bx 68.99HLI SMF-30 SmartFit®, HearPack® 100 pr/bx 58.99HLI SMF-30BU SmartFit® Blue, Nylon Cord, Poly Bag 100 pr/bx 68.99

G. Peltor® WorkTunes® 26 AM/FM Stereo Radio MuffsGet solid NRR 26 protection and AM/FM stereo entertainment all in onelightweight, adjustable headset. Slimline cup design, easy height adjustmentand wide cushions seal effectively and comfortably. Operating features includeintuitive controls, easy battery replacement, and an antenna with high receptionsensitivity. Two included AA batteries provide 180 hours of operating time.Part Number Description NRR PriceCAS HRX79AGU WorkTunes® 26 26 58.99

37

SmartFit ® with HearPack®

G

37


D

37

FSmartFit ® Blue

37

37


33

3M™ Adflo™ Powered Air Purifying Respirator System

Adflo™ with Clear Visor

Adflo™ with Speedglas™ Headgear

This 3M™ powered air-purifying respirator (PAPR) has a stackable feature,which means that the 3M™ Adflo™ Organic Vapor/Acid Gas (OV/AG)Cartridge 15-0399-99X02 can be stacked onto the high efficiency (HE)particle filter for additional protection against certain organic vapors,sulfur dioxide, chlorine, and hydrogen chlorine, and hydrogen chloridevapors. The user can selectively replace the HE filter or OV/AG Cartridgeas needed: both do not need to be changed at the same time. NiMHbattery charges in less than three hours with a smart charger that won’tovercharge. Audible and visual alarms signal low airflow and low batterycharge. Its slim profile is designed to go into tight spaces, and is designedto be ergonomically compatible for welders.

Part Number Description PriceH03 16-1101-21 Adflo™ PAPR HE System with Speedglas™ 1,175.00

FlexView HWR and Auto-Darkening Filter 9002XH03 16-3301-21 Adflo™ PAPR HE plus OV/AG System 1,245.00

with Speedglas™ FlexView HWR Helmet and Auto-Darkening Filter 9002X

H03 16-1101-40 Adflo™ PAPR HE System with ClearVisor 875.00H03 16-3301-40 Adflo™ PAPR HE plus OV/AG System with ClearVisor 870.00H03 15-1101-21 Adflo™ PAPR HE System with Speedglas™ 1,144.00

Helmet 9000HWR and Auto-Darkening Filter 9002XH03 15-3301-21SW Adflo™ PAPR HE plus OV/AG System 1,195.00

with Speedglas™ Helmet 9000HWR with SideWindows and Auto-Darkening Filter 9002X

Five-Step Particle Filter Indicator Now it’s easier than ever for a welder to determine particulate loading before the particle filter clogs and requiresreplacement. A new five-step particle filter indicator (included with your Adflo™) now lets you quickly see howmuch filter capacity you have left. It allows you to complete your project efficiently without wondering whether ornot your filter needs changing.


A

Respiratory Protection

B

C

3M™ products shown in this flyer must be used in accordance with OSHA regulations and the user instructions, warnings, and limitations accompanying each product.

A. 3M™ Particulate Welding Respirator 8515, N95 Suggested for welding, brazing, soldering, cutting, grinding, sanding, sweepingand bagging applications, the 8515, N95 provides comfortable respiratoryprotection from certain particles. Patented one-way 3M™ Cool Flow™ Exhalation Valve, M-noseclip and lightweight construction help provide cooler, dry comfortand a secure fit. The 8515, N95 features a 3M™Welding Web. The protectivelayers of this respirator are flame resistant as demonstrated per ASTM D2859-96. Not a substitute for a faceshield. Sold per box.Part Number Description Packaged Price3MR 8515 Particulate Respirator 8515, N95 10/bx 17.99

B. 3M™ Particulate Welding Respirator 8212, N95 with FacesealDesigned for welding, torch cutting and metal pouring applications, the 8212, N95 respirator helps provide long wearing, comfortable protection. Adjustablestraps and a faceseal, cake-resistant filter media, advanced electret media andthe 3M™ Cool Flow™ Exhalation Valve help make it cool and comfortable. Its slimdesign allows it to fit easily under most welding hoods. Sold per box.Part Number Description Packaged Price3MR 8212 Particulate Welding Respirator 8212, N95 10/bx 39.99

C. 3M™ Particulate Respirators 8214 and 8514, N95The 8214 and 8514, N95 are well suited for maintenance welding operations,torch cutting, brazing, soldering, and metal pouring. Features include patentedadvanced electret media, 3M™ Cool Flow™ Exhalation Valve, adjustable straps,and cake-resistant filter material. The 8214 also has a conformable faceseal.Helps provide relief from nuisance level organic vapors and ozone. Nuisancelevel refers to concentration of organic vapors not exceeding OSHA PEL orapplicable exposure limits, whichever is lower. 3M™ recommeded for ozoneprotection up to 10 times the OSHA PEL or applicable exposure limits,whichever is lower. (Not NIOSH approved for ozone). Sold per box.Part Number Description Packaged Price3MR 8214 8214, N95 Respirator/Nuisance 10/bx 48.99

Level Organic Vapor Relief3MR 8514 8514, N95 Respirator/Nuisance 10/bx 47.99

Level Organic Vapor Relief



A. IR Lens Eyewear• Stylish sculpted, ultra light frame with a wraparound lens for

superior frontal and peripheral protection• Click-to-fit comfort settings in the temple are hidden for a more

streamlined appearance• Available in shade 3.0 IR and 5.0 IR green for infrared protection• Scratch resistant lenses block 100% of UV rays• Meets ANSI Z87+ StandardPart Number Description Frame PriceRAD 64051120 3.0 IR Lens Black 8.59RAD 64051121 5.0 IR Lens Black 8.59

B. 1300 Series Single Lens Eyewear• Unique unitary lens is 8-base superior and optically correct• Universal bridge with flexible nose pads• Bayonet style temples, ergonomic grip non-slip temple tip and rugged

three-barrel hinge• Polycarbonate lens filters 100% of UV rays• Meets ANSI Z87+ StandardPart Number Lens Description Frame PriceRAD 64051351 Clear Black 2.29RAD 64051352 Clear Anti-Fog Black 2.69RAD 64051353 I/O Clear Black 2.69RAD 64051354 Gray Black 2.29RAD 64051355 Mirror Black 3.29RAD 64051361 Clear Silver 2.69RAD 64051362 Clear Anti-Fog Silver 3.19RAD 64051363 I/O Clear Silver 3.29RAD 64051364 Gray Silver 2.49

C. 1300 Series Sport Lens Eyewear• Wrapped temple styling, ergo-grip sleeve and a non-slip nosepiece• Attractive and comfortable at the right price• Lens features scratch resistant coating for a longer wear life• Blocks 100% of harmful UV rays• Meets ANSI Z87+ StandardPart Number Lens Description Frame PriceRAD 64051301 Clear Black 2.29RAD 64051302 Gray Black 2.29RAD 64051303 Mirror Black 3.49RAD 64051315 Amber Black 2.89RAD 64051304 Clear Blue 2.29RAD 64051305 Gray Blue 2.29RAD 64051313 Clear Crimson 2.59RAD 64051311 I/O Clear Crimson 2.99RAD 64051312 Mirror Crimson 3.49RAD 64051314 Clear Anti-Fog Crimson 2.99

D. 1200 Series Universal Lens Eyewear• Durable nylon universal-fit frame with adjustable click-to-fit temples• Scratch-resistant lenses block 100% of UV rays and features seamless

integrated sideshields• Meets ANSI Z87.1+ StandardPart Number Lens Description Frame PriceRAD 64051201 Clear Blue 1.29RAD 64051202 Gray Blue 1.29RAD 64051203 Clear Black 1.29RAD 64051204 Gray Black 1.29

E. 1100 Series Visitor Spec Eyewear• Durable polycarbonate material• Blocks 100% of UV rays• Meets ANSI Z87.1+ StandardPart Number Lens Description Frame PriceRAD 64051101 Clear Clear 0.69

F. Disposable Lens Cleaning StationsEliminate refilling and maintenance. Wall mount or set on counter. Choose aMini Station, which includes 650 tissues and a 31⁄2 oz. spray bottle of anti-fog,anti-static fluid that won’t scratch polycarbonate, plastic or glass lenses. TheStandard Station contains 1520 6" x 5" tissues and a large 16 oz. bottle of lenscleaning solution. Sold by the each.Part Number Description PriceRAD 64051433 Mini Station 3.39RAD 64051434 Standard Station 9.29

A

E

EyePr

otec

tionan

dLe

nsClea

ning

Stations

F

B

C

D



B75 S19-220

B75 S45-1964

A

B75 S19-210

B

FEN 320004620000

FEN 32004600000

C

InspectionWindow

InspectionWindow

Alarm

Headrest

Nozzle

Armrest

Waste Reservoir Drain Spout

Open View

D

A. BradleyWall-Mounted Eye and Eye/FaceWashWall-Mount Eyewash Units have 10" yellow impact resistant plastic or stainlesssteel eyewash bowl and twin spray heads with flow control for safe/steadywater flow. Activated with large, highly visible push handle and 1⁄2" chrome-plated brass stay-open ball valve. Water supply is 1⁄2" NPT female and waste is11⁄4" NPT female. Meets ANSI Z358.1-2004 Standard.Part Number Description Wash Bowl PriceB75 S19-220 Wall-Mount Eyewash Plastic 177.99B75 S19-220B Wall-Mount Eyewash Stainless Steel 219.99B75 S19-220FW Wall-Mount Eye/Face Wash Plastic 195.99B75 S19-220T Wall-Mount Eye/Face Wash Stainless Steel 237.99B75 S45-1964 Retrofit Cover for Plastic Bowl 103.99

B. Bradley Pedestal-Mounted Eyewash and Eye/FaceWashWith 10" diameter plastic or stainless steel bowls, Eyewash and Eye/Face Washunits feature Bradtect™ yellow coated galvanized steel pipe pedestals and floorflanges. All sprayhead assemblies include flow control and pop-off dust covers.Chrome-plated Eyewash sprayheads gently cleanse eyes and exceed minimum0.4 gpm water flow at 30 psi. ABS plastic perforated disc Eye/Face Washsprayheads exceed minimum 3 gpm water flow at 30 psi to cleanse eyes andface. Both meet ANSI Z358.1-2004 Standard.Part Number Description Wash Bowl PriceB75 S19-210 Pedestal Eyewash Plastic 220.99B75 S19-210B Pedestal Eyewash Stainless Steel 275.99B75 S19-210FW Pedestal Eye/Face Wash Plastic 251.99B75 S19-210Y Pedestal Eye/Face Wash Stainless Steel 319.99

C. Sperian SalineWall StationInstall a durable Sperian Saline Wall Station wherever immediate flushing isneeded. Sperian Saline Wall Station provides safe, first response care until theinjured person can be helped to an ANSI-compliant emergency eyewashdevice. Comes complete with wall-mounting hardware. The Single Bottle WallStation holds one 16 or 32 oz. bottle, and the Double Bottle Wall Station holdstwo 32 oz. bottles of sterile Sperian Saline Solution. Bottles are sterile, singleuse bottles.Part Number Description Size PriceFEN 320004600000 Single Bottle Wall Station 16 oz Bottle 15.69FEN 320004610000 Single Bottle Wall Station 32 oz Bottle 19.89FEN 320004620000 Double Bottle Wall Station 32 oz Bottles 29.49FEN 320004540000 Replacement Solution 16 oz Bottle 5.29FEN 320004550000 Replacement Solution 32 oz Bottle 7.29

D. Fendall 2000™ Sterile Emergency Eyewash StationThe ingenious design of the Fendall 2000™ delivers a steady, soft ribbon of 100%sterile saline solution from a 100% sterile delivery system, minimizing the risk offurther injury. Alarm sounds upon activation and completion to ensure a full 15minute flush. Ergonomic design with arm/headrest enables better compliance,and easy-view side windows allow quick expiration date checks of the 24-month cartridge. Deactivation button and integrated waste containmentease maintenance. Unit comes complete with emergency eyewash station sign,mounting bracket, installation DVD and tamper seal. Sterile Saline Solutioncartridge sold separately. Meets ANSI Z358.1-2004 Standard.Part Number Description PriceFEN 320020000000 Fendall 2000™ Station 313.29FEN 32ST20500000 Sperian Sterile Saline Refill Cartridge 206.69FEN 320010600000 Sperian Universal Cart 337.29FEN 320010650000 Sperian Universal Stand 79.99

E. STOKO® STOKODERM® BeforeWork Skin CreamSTOKODERM® Skin Cream is for use when both oil and water hazards are present,making it ideal for machine shops. Contains Eucoriol®. Products are silicone-free.Part Number Description Packaged PriceS55 28555524 STOKODERM® 100ml Tube 3.49S55 31146 STOKODERM® 1000ml Softbottle® 22.19

F. STOKO® LOTIONStockhausen Skin Care Conditoners provide revitalizing and conditioning effectsto keep skin healthy and to help avoid dermatitis. Conditioners can soothe chafingand eczema, and replace lost moisture and oils to keep skin smooth. STOKO®

LOTION is quick to absorb into skin and is ideal after bathing. Silicone-free.Part Number Description Packaged PriceS55 28210625 STOKO® LOTION 250ml Bottle 4.09S55 31144 STOKO® LOTION 1000ml Softbottle® 10.19

G. GOJO® Fast Wipes®Heavy-duty hand cleaning towels are pre-moistened with an exclusive orangeformula that quickly removes grease, grime, irritating chemicals and dirt fromhands right at the job site. Proven to save time by eliminating trips to the washstation or sink. Great for when soap and water are not readily available.Part Number Description Packaged PriceGOJ 6282-06 Resealable Container 25 each 4.19GOJ 6285-06 Convenient 9" x 10" 60/pk 8.79GOJ 6298-04 Bucket 81⁄2" x 11" 130/pk 19.79GOJ 6299-02 Bucket 73⁄4" x 11" 225/ea 26.79

Eyewash

andSkin

Care

G

F

H

E

H. GOJO® Natural Orange™ Hand CleanerNatural Orange™ Hand Cleaner uses the power of a petroleum-free citrusingredient to clean hands of moderate to heavy soils. It also contains lanolin,aloe and jojoba to protect and condition skin as it cleans. Recommended foradhesive, asphalt, carbon, cement, graphite, grease, grime, paint, printer’sink, putty, shellac, stain and tar. Natural Orange™ with pumice adds thescrubbing properties of this naturally-occurring mineral to help remove stubbornsoils from skin. Choose half or one gallon dispenser pump.Part Number Description Packaged PriceGOJ 0948-06 Natural Orange™ 1⁄2 gal pump 8.59GOJ 0945-04 Natural Orange™ 1 gal pump 12.89GOJ 0958-06 Natural Orange™ with Pumice 1⁄2 gal pump 8.59GOJ 0955-04 Natural Orange™ with Pumice 1 gal pump 12.89



Description Grab & Industrial Soft SoftCool Welding Small Large

36" x 30" Fire Blanket/Burn Wrap - - - 112" x 16" Burn Dressing (pre-cut holes for facial burns) - 1 1 18" x 18" Burn Dressing - - - 14" x 16" Burn Dressing - 1 2 14" x 4" Burn Dressing 1 2 2 32" x 6" Burn Dressing - 2 - -3" x 4 yd Sterile Gauze Roll - - 2 4Unit Dose Packets of Burn Gel 2 - - -Dispenser Box of Unit Dose Burn Jel - 1 - -Elastic Bandage - 1 - -Scissors 1 - 1 1Instruction Card - 1 1 1

Burn Kits

A. Burn Jel®Unlike petroleum products which can actually trap the heat in a burn, this waterbased, water-soluble gel actually draws the heat away from skin and dissipatesit on contact. It relieves pain fast, while it cools and soothes the affected area.Contains Lidocaine HCL 2.0%.Part Number Description Packaged PriceW49 BJ4-24 Burn Jel® 4 oz bottle 4.59W49 600U-1 Burn Jel® 3.5 gram Foil Packs 25/bx 13.79W49 100U-6 Burn Jel® 3.5 gram Foil Packs 6/bx 3.39

B. Cool JelThis topical cooling gel cools and soothes minor burns, sunburns, scalds, cutsand abrasions. Water-based and water-soluble, it won’t stick to a wound andcan be easily rinsed away. Cool Jel also forms a protective barrier to helpprotect the wound from airborne contaminants that may delay healing.Part Number Description Packaged PriceW49 CJ25-600 Cool Jel 3.5 gram Foil Packs 25/bx 8.19

C. Fire BlanketsWater-Jel® Fire Blankets are soaked in a water based, water-soluble gel torelieve pain, cool the burn and protect against airborne contamination all in oneeasy step. Fire Blankets consist of a 100% worsted wool carrier. In addition tobeing a one-step burn care product, they can also be used to put out smallfires, extinguish flames on a victim and protect a rescuer from heat and flame.Blankets can be placed directly over burnt clothing, and the gel can be easilyrinsed off with water or sterile saline. Fire Blankers do not contain lidocainePart Number Description Size PriceW49 P3630-04 Burn Wrap in Pouch 36" x 30" 48.19W49 3630-04 Burn Wrap in Canister 36" x 30" 42.19W49 7260-04 Fire Blanket in Canister 6' x 5' 99.89W49 9672-04 Heat Shield in Canister 8' x 6' 145.99W49 TM-10 Mounting Bracket for Fire Blanket 7260-04 38.79

D. Sterile Burn DressingsWater-Jel® Sterile Burn Dressings are soaked in a water based, water-solublegel to relieve pain, cool the burn and protect against airborne contamination allin one easy step. Sterile Burn Dressings consist of a medical grade non-wovenpolyester soaked in a water based, water-soluble gel and are available in sixconvenient sizes. The gel can be easily rinsed off with water or sterile saline.Dressings do not contain lidocaine.Part Number Description Size PriceW49 0206-60 Dressing 2" x 6" 2.49W49 0404-60 Dressing 4" x 4" 3.09W49 0416-28 Dressing 4" x 16" 6.09W49 0818-20 Dressing 8" x 18" 8.89W49 0820-20 Dressing for Hand Burns 8" x 20" 11.69W49 1216-20 Facial Mask Burn Dressing 12" x 16" 11.69

E. Burn KitsBe prepared for any burn emergency with Water-Jel® Burn Kits.Grab&Cool™Burn Kits offer unit dose packets, a 4" x 4" burn dressing and a pair of scissors all ina clear handy package. These kits are easily accessible in a counter-top display.The Industrial/Welding Kit is an industry specific kit packed with the products youneed in a weatherproof plastic box. TheSoft-Sided Kits are made of heavy-dutynylon. Each carrying bag features sewn-in inner pockets for organization and easyaccess of first response burn supplies. See chart for kit contents.Part Number Description Size PriceW49 2004 Grab & Cool™ Burn Kit - 4.79W49 IWK-5 Industrial Welding Kit - 47.09W49 EBK1-6 Small Soft-Sided Burn Kit 13"L x 8"H x 2"W 57.29W49 EBK2-3 Large Soft-Sided Burn Kit with Blanket 15"L x 12"H x 31⁄2"W 100.99

Burn

Care

Prod

ucts

A

C

D

E

B


A. Radnor® Three-Shelf Industrial First Aid CabinetThe Three-Shelf Cabinet is ideal when space is limited. Lightweight enoughto be portable or can be wall mounted. Durable metal construction with whitepowder coat assures long-lasting wear with minimal maintenance. Thethree-shelf cabinet is available with a standard fill or can be customized tomeet your company’s specific needs. Standard cabinet fill may vary from photodue to state OSHA requirements. Meets ANSI Z308.1-2003 Standard.Part Number Description Size PriceRAD 64058004 Three-Shelf First Aid Cabinet 15"W x 17"H x 51⁄2"D 97.49RAD 64058005 Empty Three-Shelf Cabinet 15"W x 17"H x 51⁄2"D 37.69

B. Swift Woven Adhesive BandagesComfortable woven fabric bandages flex to conform to every movement. Openweave design lets skin breath for fast healing. Designed with a comfortablenon-stick pad and a secure seal all around the wound to prevent contamination.Heavy-duty bandages have an aggressive adhesive that will stick in grease, oilor water.Part Number Description Packaged PriceHeavy-DutySH4 010812 Fingertip XLarge 25/bx 2.69SH4 010813 Fingertip Regular 40/bx 2.59SH4 010810 7⁄8" x 3" 50/bx 2.49SH4 010811 Knuckle 40/bx 3.19SH4 010819 2" x 3" 25/bx 2.79Regular WovenSH4 016433 3⁄4" x 3" 100/bx 2.79SH4 016459 1" x 3" 100/bx 3.19SH4 013940 Knuckle 40/bx 2.39SH4 016408 8-Shape Fingertip 50/bx 4.19SH4 019433 3⁄4" x 3" Bulk 650/tray 15.39SH4 019459 1" x 3" Bulk 650/tray 19.79

C. Swift Disposable Instant Cold PacksProvides temporary relief for minor swelling, sprains and strains. To use, simplylocate the inner liquid bag and squeeze firmly to rupture. Shake contents toactivate. Pack can be wrapped in a thin cloth, and then applied to injured area.Part Number Description Size PriceSH4 35185MK Junior Cold Pack, boxed 5" x 6" 0.69SH4 30100K Standard Cold Pack, boxed 6" x 9" 0.99SH4 80185MK Junior Cold Pack 5" x 6" 0.39SH4 80100K Standard Cold Pack 6" x 9" 0.49

D. Splinter Out™Individually wrapped, and sterile. This Splinter Out™ remover is ready forimmediate use.Part Number Description Packaged PriceSH4 320001 Splinter Out™ 10/bx 1.79

FirstAidand

Sqwincher

®Products


Part Number Description PriceSQW 600106 64 oz Serva-Station (includes 2 pumps, rack, cup dispenser, 2 sleeves of cups) 49.39SQW 200101 12 oz Cups, 100/tube 5.19SQW 500101 Replacement Pump 2.79SQW 600105 1 Gallon Bubba Keg Cooler 15.29SQW 400103 3 Gallon Cooler 22.69SQW 400105 5.5 Gallon Cooler 24.89SQW 060100-OR Qwik Stik, Orange, 500 ea/case 14.69SQW 060102-FP Qwik Stik, Fruit Punch, 500 ea/case 14.69SQW060101-MB Qwik Stik, Mixed Berry, 500 ea/case 14.69SQW060103-LA Qwik Stik, Lemonade, 500 ea/case 14.69SQW060104-PT Qwik Stik, Peach Tea, 500 ea/case 14.69SQW 060105-RB Qwik Stik, Raspberry, 500 ea/case 14.69SQW 060300-AS Hot Stik, Apple Spice, 500 ea/case 8.79SQW 060301-GT Hot Stik, Green Tea, 500 ea/case 8.79

Dispensing Supplies, Accessories & Sqwincher® Lite Qwik Stik

Sqwincher® - The Drink of Industry

C

A

B

E

D

Description Yield Grape Orange Fruit Punch Lemon-Lime Lemonade Tropical Cooler Cherry Mixed Berry Cool Citrus PriceFast Packs (50/bx) (4bx/ca) 1 pkt=6 oz SQW 015302 SQW 015304 SQW 015305 SQW 015308 SQW 015303 SQW 015309 SQW 015301 SQW 015300 SQW 015310 10.79/bxPowder 9.53 oz (20/bx) (4bx/ca) 1 pkt=1 gal SQW 016006 SQW 016004 SQW 016005 SQW 016008 SQW 016003 SQW 016009 SQW 016001 SQW 016002 SQW 016011 25.79/bxPowder 23.83 oz (32 pkt/ca) 1 pkt=21⁄2 gal SQW 016046 SQW 016041 SQW 016042 SQW 016043 SQW 016040 SQW 016049 SQW 016047 SQW 016048 SQW016050 95.69/caPowder 47.66 oz (16 pkt/ca) 1 pkt=5 gal SQW 016406 SQW 016404 SQW 016405 SQW 016408 SQW 016403 SQW 016409 SQW 016401 SQW 016400 SQW 016402 84.69/caLiquid Concentrate 128 oz (4/ca) 1 gal=6 gal SQW 040202 SQW 040204 SQW 040205 SQW 040208 SQW 040203 SQW 040209 SQW 040201 SQW 040200 SQW 040210 33.19/caLiquid Concentrate 64 oz (6/ca) 1 btl=5 gal SQW 030322 SQW 030324 SQW 030325 SQW 030328 SQW 030323 SQW 030329 SQW 030321 SQW 030320 SQW 030330 36.59/caLiquid Concentrate 32 oz (12/ca) 1 btl=21⁄2 gal SQW 020222 SQW 020226 SQW 020225 SQW 020224 SQW 020223 SQW 020229 SQW 020221 SQW 020220 SQW 020230 40.69/caLiquid Concentrate 12.8 oz (20/ca) 1 btl=1 gal SQW 040302 SQW 040304 SQW 040305 SQW 040308 -- -- -- -- -- 29.79/caCans 12 oz (24/ca) 1 can=12 oz SQW 100102 SQW 100104 SQW 100105 SQW 100108 SQW 100103 SQW 100109 -- -- -- 12.29/ca


38

Faci

lity

Mai

nten

ance

B

A

C

Slikwik® SOC™


A. NOTRAX® Pebble Trax® Mat - Superior Quality• Industrial Wet/Dry AreaMat• Rubber top resists against welding sparks• Easy to clean non-directional top surface• Pebble-embossed SBR rubber is combined with dense closed cell foambase with exclusive UniFusion™ technology

• Sloped beveled foam on all four undersides allows easy access on andoff mat

• 1⁄2" or 1" overall thickness• 3 year manufacturer’s warrantyPart Number Description Thickness Color PriceS57 480-2X3-BL 2'x 3' Mat 1⁄2" Black 30.19S57 480-3X5-BL 3'x 5' Mat 1⁄2" Black 75.49S57 480-3X12-BL 3'x 12' Mat 1⁄2" Black 180.99S57 480-2X75-BL 2'x 75' Roll 1⁄2" Black 754.99S57 480-3X75-BL 3'x 75' Roll 1⁄2" Black 1,132.00S57 480-4X75-BL 4'x 75' Roll 1⁄2" Black 1,510.00S57 980-2X3-BL 2'x 3' Mat 1" Black 43.49S57 980-3X5-BL 3'x 5' Mat 1" Black 108.99S57 980-3X12-BL 3'x 12' Mat 1" Black 260.99S57 980-2X75-BL 2'x 75' Roll 1" Black 1,085.00S57 980-3X75-BL 3'x 75' Roll 1" Black 1,628.00S57 980-4X75-BL 4'x 75' Roll 1" Black 2,171.00

B. NOTRAX® Cushion-Ease® Rubber Anti-FatigueMat -Best Quality• Industrial Wet/Dry AreaMat• Grease-resistant resilient rubber mat• Unique support design offering exceptional fatigue relief• Large hole drainage keeps moisture and debris away fromworker platform• Interlock together to customize for your application• 3⁄4" overall thicknessPart Number Description Thickness Color PriceS57 550-36X36-BL 3" x 3", Drainage Holes 3⁄4" Black 45.49S57 550-36X60-BL 3" x 5" Drainage Holes 3⁄4" Black 75.69S57 556-3X3-BL 3' x 3', Solid 3⁄4" Black 46.19S57 551-F0003-YL 3' Female Ramp Yellow 11.89S57 551-F0005-YL 5' Female Ramp Yellow 19.79S57 551-M0003-BL 3' Male Ramp Black 9.49S57 551-M0005-BL 5' Male Ramp Black 15.79

C. SPC BattleMat™• BattleMat™ features an industrial camouflage and a heavy duty approach

to cleaning up spills• Universal sorbent ideal as walk-on mats or single use absorbents in

manufacturing plants and similar environmentsPart Number Description Size Absorbs/Weight PriceSOR BM15 15" Perfed/ Roll 15" x 150' 25 gl/18 lbs 69.69SOR BM30 30" Perfed/ Roll 30" x 150' 52 gl/34 lbs 151.99

D. SPC ENV™ Oil Sorbent-Contractor Grade• Oil only sorbent equally effective on land or water• Efficient single-ply constructionPart Number Description Size Absorbs/Weight Packaged PriceSOR ENV500 Lightweight Pads 15" x 19" 26 gl/8 lbs 100/ba 28.99SOR ENV200 Lightweight Pads 15" x 19" 51 gl/16 lbs 200/ba 48.49SOR ENV300 Mediumweight Pads 15" x 19" 28 gl/10 lbs 100/ba 32.29SOR ENV100 Heavyweight Pads 15" x 19" 33 gl/12 lbs 100/ba 41.39SOR ENV510 Lint-Free Boom 5" x 10' 32 gl/19 lbs 4/ea 65.59SOR ENV810 Lint-Free Boom 8" x 10' 65 gl/38 lbs 4/ba 79.59SOR ENV150 Mediumweight Roll 30" x 150' 44 gl/22 lbs 1/ba 68.29

E. SPC SOC™

• Dependable, flexible tubes that contain and absorb liquids• Molds around corners and conforms to uneven surfaces• Corncob-filled SOC™ offering exceptional value for picking up allbut aggressive fluids

Part Number Description Size Absorbs/Weight Packaged PriceSOR SW-46 Slikwik® SOC™ 3" x 31⁄2' 20 gl/50 lbs 40/ca 51.59

D

E



JTR 89220022 Gallon

A

JTR 89120012 Gallon

B

C

D

A. Sure-Grip® EX Safety CabinetsProtect workers, reduce fire risks, and improve productivity by storinghazardous liquids in high performance Sure-Grip® EX Safety Cabinets.Constructed of sturdy all-welded 18-gauge, double-walled steel with 11⁄2" ofinsulating air space for fire resistance. Fail-safe, three-point self-latchingsystem provides easy, positive door closure. Three durable stainless steelbullet latches offer optimum longevity with increased heat resistance. Exclusivefeatures of Sure-Grip® EX safety cabinets include: U-Loc™ padlockable paddlehandle which is supplied with two keys and accepts an optional padlock;Haz-Alert™ reflective labeling; and SpillSlope™ safety shelves which directincidental spills to the back and bottom of leak proof sump. All cabinets meetOSHA and NFPA requirement and are FM approved.Part Number Description Size (H xW x D) PriceManual Closing DoorsJTR 892300 22 Gallon, 1 Shelf 35" x 35" x 22" 474.99JTR 893000 30 Gallon, 1 Shelf 44" x 43" x 18" 480.99JTR 893300 30 Gallon, 1 Shelf 35" x 36" x 24" 560.99JTR 894500 45 Gallon, 2 Shelves 65" x 43" x 18" 558.99JTR 896000 60 Gallon, 2 Shelves 65" x 34" x 34" 635.99JTR 899000** 90 Gallon, 2 Shelves 65" x 43" x 34" 917.99Self-Closing DoorsJTR 892320 22 Gallon, 1 Shelf 35" x 35" x 22" 524.99JTR 893020 30 Gallon, 1 Shelf 44" x 43" x 18" 594.99JTR 894520 45 Gallon, 2 Shelves 65" x 43" x 18" 689.99JTR 896020 60 Gallon, 2 Shelves 65" x 34" x 34" 739.99JTR 899020** 90 Gallon, 2 Shelves 65" x 43" x 34" 1,387.00Sliding Self-Closing DoorsJTR 893040 30 Gallon, 1 Shelf 44" x 43" x 18" 559.99JTR 894540 45 Gallon, 2 Shelves 65" x 43" x 18" 655.99** OSHA Code 29CFR 1910.106 states that not more than 60 gallons may be Class I and II liquids.

B. Compac CabinetsSafely store up to 15 gallons of flammable liquids in space-efficient yellowCompac Cabinets. Designed for use on countertops and under counters or asstand-alone units, each cabinet has one self-latching door, available in manualor self-close styles. FM approved.Part Number Description Size (H xW x D) PriceCompac CabinetsJTR 891200 12 Gallon, 1 Shelf, Manual Closing 35" x 231⁄4" x 18" 348.99JTR 891500 15 Gallon, 1 Shelf, Manual Closing 44" x 231⁄4" x 18" 387.99JTR 891220 12 Gallon, 1 Shelf, Self Closing 35" x 231⁄4" x 18" 346.99JTR 891520 15 Gallon, 1 Shelf, Self Closing 44" x 231⁄4" x 18" 389.99

C. Drum Cabinets for FlammablesBuilt with the same standard as regular safety cabinets, but designed to houseone or two 30 to 55 gallon drums. All vertical drum cabinets feature a half-depthshelf to enable access to drum pumps and funnels while providing additionalstorage capacity. Cabinets with capacity of (1) 55 gallon drum are FM approved.Part Number Description Capacity Size (H xW x D) PriceVertical DrumsJTR 896200 2 Door, Manual (1) 55 Gallon Drum 65" x 34" x 34" 743.99JTR 896220 2 Door, Self-Close (1) 55 Gallon Drum 65" x 34" x 34" 837.99JTR 899100** 2 Door, Manual (2) 55 Gallon Drums 65" x 59" x 34" 1,195.00Vertical Drums with RollersJTR 896260 2 Door, Manual (1) 55 Gallon Drum 65" x 34" x 34" 824.99JTR 896270 2 Door, Self-Close (1) 55 Gallon Drum 65" x 34" x 34" 765.99JTR 899160** 2 Door, Manual (2) 55 Gallon Drums 65" x 59" x 34" 1,276.00HorizontalJTR 899300 2 Door, Manual (1) 55 Gallon Drum 50" x 30" x 48" 743.99JTR 899320 2 Door, Self-Close (1) 55 Gallon Drum 50" x 30" x 48" 837.99RampJTR 25932 Drum ramp for all drum cabinets 241⁄2" x 28" 97.49** OSHA Code 29CFR 1910.106 states that not more than 60 gallons may be Class I and II liquids.

D. Steel Drum FunnelSteel Drum Funnel features a 103⁄4" mouth to collect liquids, fusible link-activatedcover, and 6" brass flame arrester. Made in USA. FM approved.Part Number Description PriceJTR 08207 Steel Drum Funnel 143.49

E. Type I Safety CanType I Safety Cans have a single spout for filling and pouring and a self-closing,leakproof lid. Cans up to one gallon have a trigger release handle while largercapacities have a swinging handle to greatly ease carrying heavier loads.Counterbalance design with full-fisted grip handle offers gravity-assistedpouring. Equipped with an FM-tested dual-density flame arrester and positivepressure relief mechanism. Constructed of steel with reinforcing ribs tostrengthen sidewalls. Powder coat paint finish. FM approved, UL and ULC listed.Meets OSHA and NFPA StandardsPart Number Description Capacity PriceJTR 10201 Type I Red Steel Safety Can for Flammables 1⁄2 Gallon 22.69JTR 10301 Type I Red Steel Safety Can for Flammables 1 Gallon 22.59JTR 10501 Type I Red Steel Safety Can for Flammables 2 Gallons 24.59JTR 10555 Type I Red Steel Safety Can for Flammables 2.5 Gallons 27.89JTR 10801 Type I Red Steel Safety Can for Flammables 5 Gallons 23.79

JTR 896260

FacilityM

aintenance

E


© 2007 Airgas, Inc. Printed in USA. Prices are current as of 12/1/2007. Pricing andproduct availability are subject to change without notice. All safety products shownin this catalog must be used in accordance with the user instructions, warnings andlimitations accompanying each product.

Contact your Airgas Representative today toplace an order or get your questions answered.

Airgas Ordering and Information

If you have an immediate productneed, check out our eBusinesswebsite atwww.airgas.com.There you'll find over 139,000products available 24 hours a day.

We are confident thatYou'll find it with us.SM

You'll find it with us.SM

Heat treatingmetal?Airgas has the right process for the job.

Airgas, along with process

engineers from our Airgas

Merchant Gases business, bring

the very latest engineering

solutions for heat treating metal

right to your operations.

Whether your metal treatingprocess involves carburizing/carbonitriding, hardening,annealing, nitriding/nitrocarburizing,brazing or cryotreating, providingthe right industrial gas atmospherefor the process will have a majorimpact on your bottom line. Whilemetal treating accounts for 5 to 10percent of your manufacturing cost,it can increase your overall productvalue by as much as 25 percent.

Airgas understands the thermaltreatment industry. Our expertscan engineer the right solutionto help improve your operatingcosts, product quality, processcontrol, workplace safety, andsystem productivity.

Contact AirgasMerchant Gasesto help determine the right gasesand the right process atmospherefor your operations. We’ll even setup and maintain a safe, reliableinternal gas supply tailored to yourspecific needs.

Call AirgasMerchant GasesTOLL-FREE

1-800-242-0105

Turning Up the Heat...

2A MCM-169

866-924-7427Find the Airgas location nearest you.

07 Metal Work 01-40.qxd:2005 Facility Safety #174CB.qxd 11/13/07 1:30 PM Page 40

Date post:	01-Apr-2016
Category:	Documents
Upload:	ermarketing
View:	245 times
Download:	6 times

TESTE ERMARKETING

Documents