Testing and MeasurementLab Solutions
Pressure transducers
Gain and offset pots
Water basin
Flow meter
Drain tap
Tanks
High-powered pump
Outlet orifice/plug
Measurement and instrumentation is a fundamental topic in engineering. Without accurate and reliable measurement of physical quantities such as temperature, strain, pressure, and position we will not be able to reliably monitor and control processes. Having an in-depth understanding of the concepts allows engineers to design, implement, and maintain complex engineering systems. With Quanser’s measurement and instrumentation line of products, you can teach the fundamentals of sensors, signal conditioning, and computer-based data acquisition.
Products pictured are not to scale. Additional workstation components may be required. For full product information and system configurations, visit www.quanser.com
SENSORS AND SIGNAL CONDITIONINGSensors are key building blocks of any measurement and instrumentation system. They provide a means to measure physical quantities such as temperature, pressure, strain, displacement, and velocity. Understanding signal conditioning techniques is equally important when designing and implementing state-of-the-art measurement systems. Quanser’s line of measurement and instrumentation products are suited to teach and demonstrate the fundamentals of common sensors and signal conditioning by allowing students to measure real-world physical quantities.
Introduction to SensorsOur engineering trainer boards incorporate a comprehensive range of sensors and switches, ideally suited for teaching introductory electro-mechanical measurement, sensor behavior, and calibration techniques.
Fluid & Pressure MeasurementThe Coupled Tank is a bench-scale plant suited to introduce measurement and calibration of fluid flow, liquid level, and pressure.
NI ELVIS II+ sold separately
Heating chamber
Variable speed fan
Ambient tempertature
sensor
Heating element Heating chamber temperature sensor
Channel temperature sensor
QNET HVAC Board
QNET Mechatronic Sensors Board
Magnetic field sensor
Pressure sensor
Potentiometer
Strain gauge
Reflective optical sensorEncoder
Piezo vibration
sensor
Ultrasonic distance sensor
Infrared distance sensor
Thermistor
Snap action switch
Coupled Tanks
Products pictured are not to scale. Additional workstation components may be required. For full product information and system configurations, visit www.quanser.com
DATA ACQUISITION SYSTEMSSince computers operate in the digital domain, analog signals must be converted into their digital equivalent before they are manipulated by a computer. Likewise, a digital signal from a PC must be converted to an analog signal before it can control a process. Quanser’s ground-breaking USB DAQs offer an extensive range of A/D and D/A hardware features and software support which provide a precise, reliable way to acquire and process large amounts of data in real-time. In the classroom, Quanser DAQs can be used to teach concepts such as sampling rate and signal aliasing.
Q8-USB
Mechanical Motion MeasurementsThe modular rotary motion platform is ideal for measurement and calibration of strain, angular displacement, angular velocity, vibration, and actuation.
Temperature Measurement & ControlThe Heat Flow introduces students to temperature measurement and control techniques. It is equipped with a coil-based heater and a blower, and three fast-settling platinum RTD temperature sensors.
Rotary Servo with Flexible Link
Strain guage
Encoder
Tachometer
DC motor/gearbox
Heat Flow
Fast settling, platinum tranducer
temperature sensors
Axial Fan Blower
Heater
Q1-cRIO for NI CompactRIO* QTB for NI myRIO*
*myRIO and CompactRIO sold separately
+1-905-940-3575 | [email protected] | |© Copyright 2017 Quanser Inc. Products and/or services pictured and referred to herein and their accompanying specifications may be subject to change without notice. Products and/or services mentioned herein are trademarks or registered trademarks of Quanser Inc. and/or its affiliates. All rights reserved.