+ All Categories
Home > Documents > TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf ·...

TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf ·...

Date post: 25-Mar-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
59
GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD. has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017 ''General Requirements for the Competence of Testing & Calibration Laboratories'' for its facilities at B-10, KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT, INDIA in the field of TESTING Certificate Number: TC-6166 Issue Date: 10/08/2019 Valid Until: 09/08/2021 This certificate remains valid for the Scope of Accreditation as specified in the annexure subject to continued satisfactory compliance to the above standard & the relevant requirements of NABL. (To see the scope of accreditation of this laboratory, you may also visit NABL website www.nabl-india.org) Signed for and on behalf of NABL N. Venkateswaran Chief Executive Officer
Transcript
Page 1: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

GEO TEST HOUSE - A DIVISION OF GEO DESIGNS &RESEARCH PVT. LTD.

has been assessed and accredited in accordance with the standard

ISO/IEC 17025:2017''General Requirements for the Competence of Testing &

Calibration Laboratories''for its facilities at

B-10, KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT, INDIA

in the field of

TESTINGCertificate Number: TC-6166

Issue Date: 10/08/2019 Valid Until: 09/08/2021

This certificate remains valid for the Scope of Accreditation as specified in the annexure subject to continuedsatisfactory compliance to the above standard & the relevant requirements of NABL.

(To see the scope of accreditation of this laboratory, you may also visit NABL website www.nabl-india.org)

Signed for and on behalf of NABL

N. VenkateswaranChief Executive Officer

Page 2: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

Permanent Facility

1 CHEMICAL- BUILDINGMATERIAL

Admixture - Concrete Admixture Chloride ion content IS 6925 Reaffirmed2018: 1973

2 CHEMICAL- BUILDINGMATERIAL

Admixture - Concrete Admixture Dry material content % IS 9103 Reaffirmed2018: 1999

3 CHEMICAL- BUILDINGMATERIAL

Admixture - Concrete Admixture pH IS 9103 Reaffirmed2018: 1999

4 CHEMICAL- BUILDINGMATERIAL

Admixture - Concrete Admixture Relative density IS 9103 Reaffirmed2018: 1999

5 CHEMICAL- BUILDINGMATERIAL

Aggregates (Coarse & Fine) Organic Impurities (Fine aggregatesonly)

IS 2386 (Part 2)Reaffirmed 2016: 1963

6 CHEMICAL- BUILDINGMATERIAL

Aggregates (Fine) Alkali Aggregate Reactivity IS 2386 (Part 7)Reaffirmed 2016: 1963

7 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC Chlorides (As Cl) IS 4032 Reaffirmed2019: 1985

8 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC Insoluble residue IS 4032 Reaffirmed2019: 1985

9 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC) Alkalies as (K2O) IS 4032 Reaffirmed2019: 1985

10 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC) Alumina Oxide (as Al2O3) IS 4032 Reaffirmed2019: 1985

11 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC) Calcium Oxide as (CaO) IS 4032 Reaffirmed2019: 1985

12 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC) Iron Oxide (as Fe2O3) IS 4032 Reaffirmed2019: 1985

13 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC) Loss on ignition, percent by mass IS 4032 Reaffirmed2019: 1985

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 1 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 3: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

14 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC) Magnesium oxide (MgO) IS 4032 Reaffirmed2019: 1985

15 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC) Silicon Dioxide (As SiO2) IS 4032 Reaffirmed2019: 1985

16 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC) Sulphur as SO3 IS 4032 Reaffirmed2019: 1985

17 CHEMICAL- BUILDINGMATERIAL

Cement-(OPC,PPC,PSC,SRPC) Alkalies as (Na2O) IS 4032 Reaffirmed2019: 1985

18 CHEMICAL- BUILDINGMATERIAL

Concrete & Mortar Chloride IS 14959 (Part - 1 & 2)Reaffirmed 2016: 2001

19 CHEMICAL- BUILDINGMATERIAL

Concrete & Mortar Sulphates BS 1881 (Part 124) :2015

20 CHEMICAL- BUILDINGMATERIAL

Flyash Alumina Oxide (as Al2O3) IS 1727 Reaffirmed2018: 1967

21 CHEMICAL- BUILDINGMATERIAL

Flyash Calcium Oxide as (CaO) IS 1727 Reaffirmed2018: 1967

22 CHEMICAL- BUILDINGMATERIAL

Flyash Chlorides (As Cl) IS 4032-1985reaffirmed 2019: 1985

23 CHEMICAL- BUILDINGMATERIAL

Flyash Iron Oxide (as Fe2O3) IS 1727 Reaffirmed2018: 1967

24 CHEMICAL- BUILDINGMATERIAL

Flyash Loss on ignition, percent by mass IS 1727 Reaffirmed2018: 1967

25 CHEMICAL- BUILDINGMATERIAL

Flyash Magnesium oxide (MgO) IS 1727 Reaffirmed2018: 1967

26 CHEMICAL- BUILDINGMATERIAL

Flyash silicon Dioxide IS 1727 Reaffirmed2018: 1967

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 2 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 4: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

27 CHEMICAL- BUILDINGMATERIAL

Flyash Sulphur Trioxide (as SO3) IS 1727 Reaffirmed2018: 1967

28 CHEMICAL- BUILDINGMATERIAL

GGBS- Ground granulated blastfurnace slag

Alumina Oxide as (Al2O3) IS 4032 Reaffirmed2019: 1985

29 CHEMICAL- BUILDINGMATERIAL

GGBS- Ground granulated blastfurnace slag

Calcium Oxide as (CaO) IS 4032 Reaffirmed2019: 1985

30 CHEMICAL- BUILDINGMATERIAL

GGBS- Ground granulated blastfurnace slag

Loss on ignition , percent by mass IS 4032 Reaffirmed2019: 1985

31 CHEMICAL- BUILDINGMATERIAL

GGBS- Ground granulated blastfurnace slag

Magnesium Oxide IS 4032 Reaffirmed2019: 1985

32 CHEMICAL- BUILDINGMATERIAL

GGBS- Ground granulated blastfurnace slag

Silicon Dioxide (As SiO2) IS 4032 Reaffirmed2019: 1985

33 CHEMICAL- BUILDINGMATERIAL

Tiles - Acid resistance / Ceramic /Vitrified Tiles

Resistance to Chemicals - acidsand alkalis

IS 4457 :2007Reaffirmed 2017, IS13630 Part 8:Reaffirmed 2017: 2006

34 CHEMICAL- BUILDINGMATERIAL

Tiles - Acid resistance / Ceramic /Vitrified Tiles

Resistance to house hold chemicals& swimming pool salts

IS 4457 :2007Reaffirmed 2017, IS13630 Part 8Reaffirmed 2017: 2006

35 CHEMICAL- BUILDINGMATERIAL

Tiles - Acid resistance / Ceramic /Vitrified Tiles

Staining Test IS 13630 (Part 7 & 8)Reaffirmed 2017: 2006

36 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS

Galvanised Articles, Zinc coatediron, steel & Structural steel

Mass of Zinc Coating IS 6745 Reaffirmed2016, ASTM A90/90M:2013

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 3 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 5: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

37 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS

Metallic Coatings : Metal & alloys -Aluminum Setion, Steel & StructuralSteel Articles

Powder Coating Thickness ASTM D-6132: 2017

38 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Chromium ASTM E 1251 : 2017

39 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Titanium ASTM E 1251 : 2011

40 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Copper ASTM E 1251 : 2011

41 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Iron ASTM E 1251 : 2011

42 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Lead ASTM E 1251 : 2011

43 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Magnesium ASTM E 1251 : 2011

44 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Manganese ASTM E 1251 : 2011

45 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Nickel ASTM E 1251 : 2011

46 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Silicon ASTM E 1251 : 2011

47 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Tin ASTM E 1251 : 2017

48 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Vanadium ASTM E 1251 : 2011

49 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Zinc ASTM E 1251 : 2011

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 4 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 6: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

50 CHEMICAL- METALS& ALLOYS

Aluminum & its alloys Zirconium ASTM E 1251 : 2011

51 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Aluminium IS 15338: : 2003

52 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Antimony Bruker QuantronGmbHOperationnManualIHTP: 2002

53 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Arsenic Bruker QuantronGmbHOperationnManualIHTP: 2002

54 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Boron Bruker QuantronGmbHOperationnManualIHTP: 2002

55 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Carbon IS 15338: 2003

56 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Chromium IS 15338: 2003

57 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Cobalt Bruker QuantronGmbHOperationnManualIHTP: 2002

58 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Copper IS 15338: 2003

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 5 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 7: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

59 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Lead Bruker QuantronGmbHOperationnManualIHTP: 2002

60 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Manganese IS 15338 : 2003

61 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Molybdenum IS 15338: 2003

62 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Nickel IS 15338: 2003

63 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Niobium Bruker QuantronGmbHOperationnManualIHTP: 2002

64 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Phosphorous IS 15338: 2003

65 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Silicon IS 15338: 2003

66 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Sulphur IS 15338 : 2003

67 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Tin Bruker QuantronGmbHOperationnManualIHTP: 2002

68 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Titanium Bruker QuantronGmbHOperationnManualIHTP: 2002

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 6 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 8: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

69 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Tungsten Bruker QuantronGmbHOperationnManualIHTP: 2002

70 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Vanadium IS 15338: 2003

71 CHEMICAL- METALS& ALLOYS

Cast Iron & its Alloys Zirconium Bruker QuantronGmbHOperationnManualIHTP: 2002

72 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Aluminium ASTM E 415 : 2017

73 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Antimony ASTM E 415 : 2017

74 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Arsenic ASTM E 415 : 2017

75 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Chromium ASTM E 415 : 2017

76 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Cobalt ASTM E 415 : 2017

77 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Manganese ASTM E 415 : 2017

78 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Molybdenum ASTM E 415 : 2017

79 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Nickel ASTM E 415 : 2017

80 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Niobium ASTM E 415 : 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 7 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 9: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

81 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Nitrogen ASTM E 415 : 2017

82 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Phosphorous ASTM E 415 : 2017

83 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Silicon ASTM E 415 : 2017

84 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Sulphur ASTM E 415 : 2017

85 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Tin ASTM E 415 : 2017

86 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Titanium ASTM E 415 : 2017

87 CHEMICAL- METALS& ALLOYS

Low Alloy Steel & its Alloys Vanadium ASTM E 415 : 2017

88 CHEMICAL- METALS& ALLOYS

Low Alloy Steel and its Alloys Copper ASTM E 415 : 2017

89 CHEMICAL- METALS& ALLOYS

Low Alloys Steel & its Alloys Boron ASTM E 415 : 2017

90 CHEMICAL- METALS& ALLOYS

Low Alloys Steel & its Alloys Carbon ASTM E 415 : 2017

91 CHEMICAL- METALS& ALLOYS

Stainless Steel Boron Bruker QuantronGmbH OperationManual IHTP: 2001

92 CHEMICAL- METALS& ALLOYS

Stainless Steel Carbon ASTM E-1086 : 2014,IS 9879: 1998Reaffirmed : 2015

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 8 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 10: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

93 CHEMICAL- METALS& ALLOYS

Stainless Steel Chromium ASTM E-1086 : 2014,IS 9879 : 1998Reaffirmed : 2015

94 CHEMICAL- METALS& ALLOYS

Stainless Steel Copper ASTM E-1086 : 2014,IS 9879: 1998Reaffirmed: 2015

95 CHEMICAL- METALS& ALLOYS

Stainless Steel Manganese ASTM E-1086 : 2014,IS 9879 : 1998Reaffirmed: 2015

96 CHEMICAL- METALS& ALLOYS

Stainless Steel Molybdenum ASTM E-1086 : 2014,IS 9879 : 1998Reaffirmed: 2015

97 CHEMICAL- METALS& ALLOYS

Stainless Steel Nickel ASTM E-1086 : 2014,IS 9879: 1998Reaffirmed: 2015

98 CHEMICAL- METALS& ALLOYS

Stainless Steel Niobium Bruker QuantronGmbH OperationManual IHTP-: 2001

99 CHEMICAL- METALS& ALLOYS

Stainless Steel Nitrogen Bruker QuantronGmbH OperationManual IHTP: 2001

100 CHEMICAL- METALS& ALLOYS

Stainless Steel Phosphorous ASTM E-1086 : 2014,IS 9879:1998Reaffirmed: 2015

101 CHEMICAL- METALS& ALLOYS

Stainless Steel Silicon ASTM E-1086 : 2014,IS 9879: 1998Reaffirmed: 2015

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 9 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 11: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

102 CHEMICAL- METALS& ALLOYS

Stainless Steel Sulphur ASTM E-1086 : 2014,IS 9879: 1998Reaffirmed: 2015

103 CHEMICAL- METALS& ALLOYS

Stainless Steel Titanium Bruker QuantronGmbH OperationManual IHTP: 2001

104 CHEMICAL- METALS& ALLOYS

Stainless Steel Tungsten Bruker QuantronGmbH OperationManual IHTP: 2001

105 CHEMICAL- METALS& ALLOYS

Stainless Steel Vanadium Bruker QuantronGmbH OperationManual IHTP: 2001

106 CHEMICAL- METALS& ALLOYS

Steel castings Carbon ASTM E 415 : 2017

107 CHEMICAL- METALS& ALLOYS

Steel castings Chromium ASTM E 415 : 2017

108 CHEMICAL- METALS& ALLOYS

Steel castings Copper IS 8811 Reaffirmed2018 :1998,ASTM E415 : 2017

109 CHEMICAL- METALS& ALLOYS

Steel castings Manganese ASTM E 415 : 2017

110 CHEMICAL- METALS& ALLOYS

Steel castings Nickel ASTM E 415 : 2017

111 CHEMICAL- METALS& ALLOYS

Steel castings Phosphorous ASTM E 415 : 2017

112 CHEMICAL- METALS& ALLOYS

Steel castings Silicon ASTM E 415 : 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 10 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 12: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

113 CHEMICAL- METALS& ALLOYS

Steel castings Sulphur ASTM E 415 : 2017

114 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Accelerated storage Stability IS 133 Part 1Reaffirmed 2018: 2013

115 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Ash Content IS 101 (Part 8/ Sec. 3)Reaffirmed 2014: 1993

116 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Colour IS 101 (Part 4 / Sec.2)Reaffirmed 2014: 1989

117 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Dry film Thickness IS 101 (Part 3/ Sec. 2)Reaffirmed 2014: 1989

118 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Drying Time(a)Surface Dry(b)HardDry(c)Tack free Dry

IS 101 (Part 3/ Sec. 1)Reaffirmed 2017: 1986

119 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Finish IS 101 (Part 3 / Sec. 4)Reaffirmed 2014: 1987

120 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Freedom from yellowing IS 133 Part 1Reaffirmed 2018: 2013

121 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Gloss @ 60 IS 101 (Part 4/ Sec. 4)Reaffirmed 2017: 1988

122 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Mass in Kg/10 liters IS 101 (Part 1/ Sec. 7)Reaffirmed 2014: 1987

123 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Non Volatile matter. IS 101 (Part 8/ Sec. 2)Reaffirmed 2017: 1990

124 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Pencil Hardness test IS 101 (Part 5/ Sec. 1)Reaffirmed 2014: 1988

125 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Residue on Sieve IS 101 (Part 8/ Sec. 1)Reaffirmed 2014: 1989

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 11 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 13: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

126 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Resistance to acid IS 9862 : 2017

127 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Resistance to Alkali. IS 9862 : 2017

128 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Resistance to heat IS 101 (Part 7/ Sec. 3)Reaffirmed 2015: 1990

129 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Resistance to water IS 101 (Part 7/ Sec. 1)Reaffirmed 2014: 1989

130 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Volatile Matter IS 101 (Part 2/ Sec. 2)Reaffirmed 2017: 1986

131 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Volume Solids IS 101 (Part 8/ Sec. 6)Reaffirmed 2014: 1993

132 CHEMICAL- PAINTS &SURFACE COATING

Ready Mix Paints, Enamels,Varnishes, Epoxy

Water content IS 101 (Part 2/ Sec.1) :2018

133 CHEMICAL- SOIL ANDROCK

Bentonite Copper as CuO IS 6186 Reaffirmed2015: 1986

134 CHEMICAL- SOIL ANDROCK

Bentonite Gel Formation index IS 6186 Reaffirmed2015: 1986

135 CHEMICAL- SOIL ANDROCK

Bentonite Loss on Ignition IS 6186 Reaffirmed2015: 1986

136 CHEMICAL- SOIL ANDROCK

Bentonite Manganese as MnO IS 6186 Reaffirmed2015: 1986

137 CHEMICAL- SOIL ANDROCK

Bentonite Matter Soluble in water IS 6186 Reaffirmed2015: 1986

138 CHEMICAL- SOIL ANDROCK

Bentonite pH IS 6186 -1986reaffirmed 2015: 1986

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 12 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 14: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

139 CHEMICAL- SOIL ANDROCK

Lime Stone & Dolomite Aluminium as Aluminium Oxide(Al2O3)

IS 1760 Part 3Reaffirmed 2017: 1992

140 CHEMICAL- SOIL ANDROCK

Lime Stone & Dolomite Calcium as Calcium Oxide (CaO) IS 1760 Part 3Reaffirmed 2017: 1992

141 CHEMICAL- SOIL ANDROCK

Lime Stone & Dolomite Chloride as Cl IS 1760 Part 5Reaffirmed 2017: 1991

142 CHEMICAL- SOIL ANDROCK

Lime Stone & Dolomite Iron as Iron Oxide (Fe2O3) IS 1760 Part 3Reaffirmed 2017: 1992

143 CHEMICAL- SOIL ANDROCK

Lime Stone & Dolomite Loss On Ignition IS 1760 Part 1Reaffirmed 2017: 1991

144 CHEMICAL- SOIL ANDROCK

Lime Stone & Dolomite Magnesium as Magnesium Oxide(MgO)

IS 1760 Part 3Reaffirmed 2017: 1992

145 CHEMICAL- SOIL ANDROCK

Lime Stone & Dolomite Silicon as Silicon Dioxide (SiO2) IS 1760 Part 2Reaffirmed 2017: 1991

146 CHEMICAL- SOIL ANDROCK

Soil Calcium Carbonate IS 2720 (Part 23)Reaffirmed 2015: 1976

147 CHEMICAL- SOIL ANDROCK

Soil Chloride (as Cl) BS 1377-3: 2018

148 CHEMICAL- SOIL ANDROCK

Soil Electrical Conductivity, milimhos/cm IS 14767 Reaffirmed2016: 2000

149 CHEMICAL- SOIL ANDROCK

Soil Loss on Ignition,% BS 1377-3: 2018

150 CHEMICAL- SOIL ANDROCK

Soil Organic Carbon , % BS 1377-3: 2018

151 CHEMICAL- SOIL ANDROCK

Soil Organic Matter, % IS 2720 (Part 22)Reaffirmed 2015 :1972,BS 1377-3: 2018

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 13 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 15: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

152 CHEMICAL- SOIL ANDROCK

Soil pH Value IS 2720 (Part 26)Reaffirmed 2016 :1987,BS 1377-3: 2018

153 CHEMICAL- SOIL ANDROCK

Soil Redox Potential, mv BS 1377-3: 2018

154 CHEMICAL- SOIL ANDROCK

Soil Total Dissolved Solids IS 2720 (Part 21)Reaffirmed 2015:1977,BS 1377-3: 2018

155 CHEMICAL- SOIL ANDROCK

Soil Total Soluble Sulphate % IS 2720 (Part 27)Reaffirmed 2015:1977,BS 1377-3: 2018

156 CHEMICAL- WATER Drinking Water Magnesium (as Mg) IS 3025 (Part 46)Reaffirmed 2019 :1994,APHA 23rd-Ed3500 -Mg method B:2017

157 CHEMICAL- WATER Drinking Water Manganese (as Mn) IS 3025 (Part 59)Reaffirmed 2017 :2006, APHA 23rd Ed3125 method B : 2017

158 CHEMICAL- WATER Drinking Water Strontium APHA 23rd Ed 3500-Srmethod C: 2017

159 CHEMICAL- WATER Drinking Water Acidity IS 3025 (PART 22)Reaffirmed 2019 :1986, APHA 23rd Ed2310 method B: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 14 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 16: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

160 CHEMICAL- WATER Drinking Water Alkalinity IS 3025 (Part 23)Reaffirmed 2019 : 1986, APHA 23rd Ed 2320method B: 2017

161 CHEMICAL- WATER Drinking Water Aluminium (as Al) IS 3025 (Part 55)Reaffirmed 2019 :2003, APHA 23rd Ed3125 method B: 2017

162 CHEMICAL- WATER Drinking Water Ammonia (as total ammonia - N) IS 3025 (PART 34)Reaffirmed 2019 :1988,APHA 23rd Ed4500-NH3 C: 2017

163 CHEMICAL- WATER Drinking Water Antimony (as Sb) Annexex. G of IS13428 Reaffirmed 2014: 2005, IS 15302Reaffirmed 2014 :2003, APHA 23rd Ed3125 B: 2017

164 CHEMICAL- WATER Drinking Water Arsenic (as As) IS 3025 (Part 37)Reaffirmed 2019 :1988, APHA 23rd Ed3125 method B: 2017

165 CHEMICAL- WATER Drinking Water Barium (as Ba) Annexex F of IS 13428Reaffirmed 2014 :2005, IS 15302Reaffirmed 2014 :2003, APHA 23rd Ed3125 method B: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 15 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 17: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

166 CHEMICAL- WATER Drinking Water Boron (as B) IS 3025 (PART 57)Reaffirmed 2017 :2005, APHA 23rd Ed3500 method B: 2017

167 CHEMICAL- WATER Drinking Water Cadmium (as Cd) IS 3025 (Part 41)Reaffirmed 2019 :1992, APHA 23rd Ed3125 method B: 2017

168 CHEMICAL- WATER Drinking Water Calcium (as Ca) IS 3025 (Part-40)Reaffirmed 2019 : 1991: APHA 23rd Ed 3500-Ca method B & 3120method B: 2017

169 CHEMICAL- WATER Drinking Water Chloride (as Cl) IS 3025 (Part 32)Reaffirmed 2019 :1988, APHA 23rd Ed4500-Cl method B:2017

170 CHEMICAL- WATER Drinking Water Chromium (as Cr) Annex. J of IS 13428Reaffirmed 2014 :2005, APHA 23rd Ed3125 method B: 2017

171 CHEMICAL- WATER Drinking Water Cobalt (as Co) APHA 23rd Ed 3500-Co method C: 2017

172 CHEMICAL- WATER Drinking Water Colour IS 3025 (Part 4)Reaffirmed 2017 :1983, APHA 23rd Ed2120 method B : 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 16 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 18: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

173 CHEMICAL- WATER Drinking Water Copper (as Cu) IS 3025 (Part 42)Reaffirmed 2019 :1992, APHA 23rd Ed3125 method B: 2017

174 CHEMICAL- WATER Drinking Water Iron (as Fe) IS 3025 (Part 53)Reaffirmed 2019 :2003, APHA 23rd Ed3500 - Fe method A :2017

175 CHEMICAL- WATER Drinking Water Lead (as Pb) IS 3025 (Part 47)Reaffirmed 2019 :1994, APHA 23rd Ed3125 method B : 2017

176 CHEMICAL- WATER Drinking Water Mercury (as Hg) IS 3025 (Part 48)Reaffirmed 2019 :1994, APHA 23rd Ed3500 -Hg method B &C: 2017

177 CHEMICAL- WATER Drinking Water Molybdenum (as Mo) IS 3025 (PART 2)Reaffirmed 2019 :2004, APHA 23rd Ed3500-Mo method C:2017

178 CHEMICAL- WATER Drinking Water Nickel (as Ni) Annex. L of IS 13428Reaffirmed 2014 :2005, APHA 23rd Ed3125 method B: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 17 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 19: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

179 CHEMICAL- WATER Drinking Water Nitrate IS 3025 (Part 34)Reaffirmed 2019 :1988, APHA 23rd Ed4500 -NO3- : 2017

180 CHEMICAL- WATER Drinking Water Nitrite IS 3025 (Part34)Reaffirmed 2019 :1988, APHA 23rd Ed4500 -NO2- : 2017

181 CHEMICAL- WATER Drinking Water pH IS 3025 (Part 11)Reaffirmed 2017 :1983,APHA 23rd Ed4500 - H+: 2017

182 CHEMICAL- WATER Drinking Water Phosphates (as P) IS 3025 (PART 31)Reaffirmed 2019 :1988, APHA 23rdEd.4500: 2017

183 CHEMICAL- WATER Drinking Water Potassium (as K) APHA 23rd Ed 3500-Kmethod C: 2017

184 CHEMICAL- WATER Drinking Water Selenium (as Se) IS 15303 Reaffirmed2014 : 2003, APHA23rd Ed 3125 methodB : 2017

185 CHEMICAL- WATER Drinking Water Sodium (as Na) IS 3025 (Part 45)Reaffirmed 2019 :1993, APHA 23rd Ed3500 - Na method C:2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 18 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 20: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

186 CHEMICAL- WATER Drinking Water Sulphate (as SO4 ) IS 3025 (Part 24)Reaffirmed 2019 :1986, APHA 23rd Ed4500 - SO42- C: 2017

187 CHEMICAL- WATER Drinking Water Total hardness (as CaCO3 ) IS 3025 (PART 21)Reaffirmed 2019 :2009, APHA 23rd Ed2340-method B& C:2017

188 CHEMICAL- WATER Drinking Water Total Solids IS 3025 (Part 15)Reaffirmed 2019 :1984, APHA 23rd Ed.2540 -method C: 2017

189 CHEMICAL- WATER Ground Water, Bore Water Nitrate IS 3025 (Part 34)Reaffirmed 2019 :1988, APHA 23rd Ed4500 -NO3- : 2017

190 CHEMICAL- WATER Ground Water, Bore Water Acidity IS 3025 (Part 22)Reaffirmed 2019 :1986, APHA 23rd Ed2310 method B: 2017

191 CHEMICAL- WATER Ground Water, Bore Water Alkalinity IS 3025 (Part 23)Reaffirmed 2019 :1986, APHA 23rd Ed2320 method B: 2017

192 CHEMICAL- WATER Ground Water, Bore Water Aluminium (as Al) IS 3025 (Part 55)Reaffirmed 2019 :2003, APHA 23rd Ed3125 method B: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 19 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 21: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

193 CHEMICAL- WATER Ground Water, Bore Water Ammonia (as total ammonia - N) IS 3025 (Part-34)Reaffirmed 2019 :1988, APHA 23rd Ed4500-NH3 C: 2017

194 CHEMICAL- WATER Ground Water, Bore Water Antimony (as Sb) Annexex. G of IS13428 Reaffirmed 2014:2005, IS 15302Reaffirmed 2014 :2003,APHA 23rd Ed 3125 B:2017

195 CHEMICAL- WATER Ground Water, Bore Water Arsenic (as As) IS 3025 (Part 37)Reaffirmed 2019 :1988, APHA 23rd Ed3125 method B: 2017

196 CHEMICAL- WATER Ground Water, Bore Water Barium (as Ba) Annexex F of IS 13428Reaffirmed 2014 :2005, IS 15302Reaffirmed 2014 :2003,APHA 23rd Ed 3125method B: 2017

197 CHEMICAL- WATER Ground Water, Bore Water Boron (as B) IS 3025 (Part 57)Reaffirmed 2017 :2005,APHA 23rd Ed 3500method B: 2017

198 CHEMICAL- WATER Ground Water, Bore Water Cadmium (as Cd) IS 3025 (Part 41)Reaffirmed 2019 :1992,APHA 23rd Ed 3125method B: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 20 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 22: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

199 CHEMICAL- WATER Ground Water, Bore Water Calcium (as Ca) IS 3025 (Part-40)Reaffirmed 2019 :1991, APHA 23rd Ed3500- Ca method B &3120 method B: 2017

200 CHEMICAL- WATER Ground Water, Bore Water Chloride (as Cl) IS 3025 (Part 32)Reaffirmed 2019 :1988,APHA 23rd Ed 4500-Clmethod B: 2017

201 CHEMICAL- WATER Ground Water, Bore Water Chromium (as Cr) Annex. J of IS 13428Reaffirmed 2014 :2005,APHA 23rd Ed 3125method B: 2017

202 CHEMICAL- WATER Ground Water, Bore Water Cobalt (as Co) APHA 23rd Ed 3500-Co method C: 2017

203 CHEMICAL- WATER Ground Water, Bore Water Colour IS 3025 (Part 4)Reaffirmed 2017 :1983,APHA 23rd Ed 2120method B : 2017

204 CHEMICAL- WATER Ground Water, Bore Water Copper (as Cu) IS 3025 (Part 42)Reaffirmed 2019 :1992, APHA 23rd Ed3125 method B: 2017

205 CHEMICAL- WATER Ground Water, Bore Water Iron (as Fe) IS 3025 (Part 53)Reaffirmed 2019 :2003,APHA 23rd Ed 3500 -Fe method A : 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 21 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 23: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

206 CHEMICAL- WATER Ground Water, Bore Water Lead (as Pb) IS 3025 (Part 47)Reaffirmed 2019 :1994,APHA 23rd Ed 3125method B: 2017

207 CHEMICAL- WATER Ground Water, Bore Water Magnesium (as Mg) IS 3025 (Part 46)Reaffirmed 2019:1994,APHA 23rd Ed3500 -Mg method B:2017

208 CHEMICAL- WATER Ground Water, Bore Water Manganese (as Mn) IS 3025 (Part 59)Reaffirmed 2017 :2006,APHA 23rd Ed 3125method B: 2017

209 CHEMICAL- WATER Ground Water, Bore Water Mercury (as Hg) IS 3025 (Part 48)Reaffirmed 2019 :1994, APHA 23rd Ed3500 -Hg method B &C: 2017

210 CHEMICAL- WATER Ground Water, Bore Water Molybdenum (as Mo) IS 3025 (Part 2)Reaffirmed 2019 :2004,APHA 23rd Ed 3500 -Mo method C: 2017

211 CHEMICAL- WATER Ground Water, Bore Water Nickel (as Ni) Annex. L of IS 13428Reaffirmed 2014 :2005,APHA 23rd Ed 3125method B: 2017

212 CHEMICAL- WATER Ground Water, Bore Water Nitrite IS 3025 (Part 34)Reaffirmed 2019 :1988,APHA 23rd Ed 4500 -NO2- : 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 22 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 24: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

213 CHEMICAL- WATER Ground Water, Bore Water pH IS 3025 (Part 11)Reaffirmed 2017 :1983,APHA 23rd Ed 4500 -H+: 2017

214 CHEMICAL- WATER Ground Water, Bore Water Phosphates (as P) IS 3025 (Part 31)Reaffirmed 2019 :1988,APHA 23rd Ed.4500:2017

215 CHEMICAL- WATER Ground Water, Bore Water Potassium (as K) APHA 23rd Ed 3500 -K method C: 2017

216 CHEMICAL- WATER Ground Water, Bore Water Selenium (as Se) IS 15303 Reaffirmed2014 :2003, APHA23rd Ed 3125 methodB: 2017

217 CHEMICAL- WATER Ground Water, Bore Water Sodium (as Na) IS 3025 (Part 45)Reaffirmed 2019 :1993,APHA 23rd Ed 3500 -Na method C: 2017

218 CHEMICAL- WATER Ground Water, Bore Water Strontium APHA 23rd Ed 3500 -Sr method C: 2017

219 CHEMICAL- WATER Ground Water, Bore Water Sulphate (as SO4 ) IS 3025 (Part 24)Reaffirmed 2019 :1986,APHA 23rd Ed 4500 -SO42- C: 2017

220 CHEMICAL- WATER Ground Water, Bore Water Total hardness (as CaCO3 ) IS 3025 (Part 21)Reaffirmed 2019 :2009,APHA 23rd Ed. 2340 -method B & C: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 23 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 25: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

221 CHEMICAL- WATER Ground Water, Bore Water Total solids IS 3025 (Part 15)Reaffirmed 2019 :1984,APHA 23rd Ed.2540method C: 2017

222 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Alkalinity IS 3025(PART23)Reaffirmed2019:1986, APHA 23rdEd 2320 method B:2017

223 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Acidity IS 3025 (PART22)Reaffirmed2019:1986, APHA 23rdEd 2310 method B:2017

224 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Aluminium (as Al) IS 3025 (PART55)Reaffirmed2019:2003,APHA 23rdEd 3125 method B:2017

225 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Ammonia (as total ammonia - N) IS 3025 (PART34)Reaffirmed2019:1988 , APHA23rd Ed 4500- NH3 C:2017

226 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Antimony (as Sb) Annexex. G of IS13428 Reaffirmed2014:2005, IS 15302Reaffirmed 2014:2003,APHA 23rd Ed 3125method B: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 24 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 26: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

227 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Arsenic (as As) IS 3025 (PART37)Reaffirmed2019:1988, APHA 23rdEd 3125 method B:2017

228 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Barium (as Ba) Annexex F of IS 13428Reaffirmed2014:2005,IS 15302Reaffirmed 2014:2003,APHA 23rd Ed 3125method B: 2017

229 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Boron (as B) IS 3025 (PART57)Reaffirmed2017:2005, APHA 23rdEd 3500 method B:2017

230 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Cadmium (as Cd) IS 3025 (PART41)Reaffirmed2019:1992, APHA 23rdED 3125 method B:2017

231 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Calcium (as Ca) IS 3025 (PART40)Reaffirmed2019:1991, APHA 23rdEd 3500-Ca method B& 3120 method B: 2017

232 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Chloride (as Cl) IS 3025 (PART32)Reaffirmed2019;1988, APHA 23rdEd 4500-cl methood B:2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 25 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 27: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

233 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Chromium (as Cr) Annex. J of IS 13428Reaffirmed 2014:2005,APHA 23rd Ed 3125method B: 2017

234 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Cobalt (as Co) APHA 23rd Ed 3500-Co method C: 2017

235 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Colour IS 3025 (PART4)Reaffirmed2017:1983, APHA 23rdEd 2120 method B:2017

236 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Copper (as Cu) IS 3025 (PART42)Reaffirmed2019:1992, APHA 23rdEd 3125 method B:2017

237 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Iron (as Fe) IS 3025 (PART53)Reaffirmed2019:2003, APHA 23rdEd 3500-Fe method A:2017

238 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Lead (as Pb) IS 3025 (PART47)Reaffirmed2019:1994, APHA 23rdEd 3125 method B:2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 26 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 28: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

239 CHEMICAL- WATER Packaged Drinking water, Packagednatural mineral water

Magnesium (as Mg) IS 3025(Part46)Reaffirmed2019:1994, APHA23rdEd 2012 3500-Mgmethod B: 2017

240 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Manganese (as Mn) IS 3025 (Part59)Reaffirmed2017:2006 , APHA22nd Ed 2012 3125method B: 2017

241 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Mercury (as Hg) IS 3025 (PART48)Reaffirmed2019:1994, APHA 23rdEd 3500-Hg method B& C: 2017

242 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Molybdenum (as Mo) IS 3025 (PART2)Reaffirmed2019:2004 , APHA23rd Ed 3500-Momethod C: 2017

243 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Nickel (as Ni) Annex. L of IS 13428Reaffirmed 2014:2005,APHA 23rd Ed 3125method B: 2017

244 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Nitrate IS 3025 (PART34)Reaffirmed2019:1988, APHA 23rdEd 4500-NO3-: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 27 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 29: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

245 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Nitrite IS 3025 (PART34)Reaffirmed2019:1988, APHA 23rdEd 4500-NO2-: 2017

246 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

pH IS 3025 (PART11)Reaffirmed2017:1983, APHA 23rdEd 4500-H+: 2017

247 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Phosphates (as P) IS 3025 (PART31)Reaffirmed2019:1988, APHA 23rdEd 4500: 2017

248 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Potassium (as K) APHA 23rd Ed 3500-Kmethod C: 2017

249 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Selenium (as Se) IS 15303 Reaffirmed2014:2003, APHA 23rdEd 3125 method B:2017

250 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Sodium (as Na) IS 3025 (PART45)Reaffirmed2019:1993, APHA 23rdEd 3500-Na method C:2017

251 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Strontium APHA 23rd Ed 3500-Srmethod C: 2017

252 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Sulphate (as SO4) IS 3025 (PART24)Reaffirmed2019:1986, APHA 23rdEd 4500-SO42- C:2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 28 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 30: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

253 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Total hardness (as CaCO3 ) IS 3025 (PART21)Reaffirmed2019:2009, APHA 23rdEd 2340 method B & C:2017

254 CHEMICAL- WATER Packaged Drinking Water,Packaged natural mineral water

Total solids IS 3025 (PART15)Reaffirmed2019:1984, APHA 23rdEd 2540 method C:2017

255 CHEMICAL- WATER Waste Water COD IS 3025 (Part58)Reaffirmed 2017 :2006, APHA 23rd Ed5220 method B & C :2017

256 CHEMICAL- WATER Waste Water Magnesium (as Mg) IS 3025 (Part46)Reaffirmed 2019 :1994,APHA 23rd Ed3500 -Mg method A:2017

257 CHEMICAL- WATER Waste Water Manganese (as Mn) IS 3025 (Part59)Reaffirmed 2017 :2006, APHA 23rd Ed3125 method B : 2017

258 CHEMICAL- WATER Waste water Sulphide (as H2 S) IS 3025 (Part29)Reaffirmed2019:1986, APHA 23rdEd. 4500 - S2- F: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 29 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 31: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

259 CHEMICAL- WATER Waste water Turbidity IS 3025 (Part10)Reaffirmed2017:2017, APHA 23rdEd. 2130 -method B:2017

260 CHEMICAL- WATER Waste water Vanadium (as V) APHA 23rd Ed. 3125method B: 2017

261 CHEMICAL- WATER Waste Water Acidity IS 3025 (Part 22)Reaffirmed 2019:1986,APHA 23rd Ed 2310method B: 2017

262 CHEMICAL- WATER Waste Water Alkalinity IS 3025 (Part23)Reaffirmed2019:1986, APHA 23rdEd 2320 method B:2017

263 CHEMICAL- WATER Waste Water Aluminium (as Al) IS 3025 (Part55)Reaffirmed2019:2003, APHA 23rdEd 3121 method B:2017

264 CHEMICAL- WATER Waste Water Ammonia (as total ammonia - N) IS 3025 (Part-34)Reaffirmed2019:1988, APHA 23rdEd 4500-NH3 C: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 30 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 32: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

265 CHEMICAL- WATER Waste Water Antimony (as Sb) Annexex. G of IS13428 Reaffirmed2014:2005, IS 15302Reaffirmed 2014:2003,APHA 23rd Ed 3125method B: 2017

266 CHEMICAL- WATER Waste Water Arsenic (as As) IS 3025 (Part37)Reaffirmed2019:1988, APHA 23rdEd 3125 method B:2017

267 CHEMICAL- WATER Waste Water Barium (as Ba) Annexex F of IS 13428Reaffirmed 2014:2005,IS 15302 Reaffirmed2014:2003, APHA 23rdEd 3125 B: 2017

268 CHEMICAL- WATER Waste Water BOD IS 3025 (Part44)Reaffirmed2019:1993, APHA 23rdEd 5210 method B:2017

269 CHEMICAL- WATER Waste Water Boron (as B) IS 3025 (Part57)Reaffirmed2017:2005, APHA 23rdEd 3500 method B:2017

270 CHEMICAL- WATER Waste Water Cadmium (as Cd) IS 3025 (Part41)Reaffirmed2019:1992, APHA 23rdEd 3125 method B:2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 31 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 33: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

271 CHEMICAL- WATER Waste Water Calcium (as Ca) IS 3025 (Part-40)Reaffirmed2019:1991, APHA 23rdEd 3500- Ca method B& 3120 method B: 2017

272 CHEMICAL- WATER Waste Water Chloride (as Cl) IS 3025 (Part32)Reaffirmed2019:1988, APHA 23rdEd 4500-Cl method B:2017

273 CHEMICAL- WATER Waste Water Chromium (as Cr) Annex. J of IS 13428Reaffirmed 2014:2005,APHA 23rd Ed 3125method B: 2017

274 CHEMICAL- WATER Waste Water Cobalt (as Co) APHA 23rd Ed 3125method B: 2017

275 CHEMICAL- WATER Waste Water Colour IS 3025 (Part4)Reaffirmed2017:1983, APHA 23rdEd 2120 method B :2017

276 CHEMICAL- WATER Waste Water Copper (as Cu) IS 3025 (Part42)Reaffirmed2019:1992, APHA 23rdEd 3125 method B:2017

277 CHEMICAL- WATER Waste Water Dissolved oxygen APHA 23rd Ed. 4500-Omethod B ,C & D: 2017

278 CHEMICAL- WATER Waste Water Electrical Conductivity IS 3025 (Part 14)Reaffirmed 2019: 1984

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 32 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 34: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

279 CHEMICAL- WATER Waste Water Iron (as Fe) IS 3025 (Part53)Reaffirmed2019:2003, APHA 23rdEd 3500 - Fe method A: 2017

280 CHEMICAL- WATER Waste Water Lead (as Pb) IS 3025 (Part47)Reaffirmed2019:1994, APHA 23rdEd 3125 method B:2017

281 CHEMICAL- WATER Waste Water Mercury (as Hg) IS 3025 (Part48)Reaffirmed2019:1994, APHA 23rdEd 3500 -Hg method B& C: 2017

282 CHEMICAL- WATER Waste Water Molybdenum (as Mo) IS 3025 (Part 2)Reaffirmed 2019:2004,APHA 23rd Ed 3125method B: 2017

283 CHEMICAL- WATER Waste Water Nickel (as Ni) Annex. L of IS 13428Reaffirmed 2014:2005 ,APHA 23rd Ed 3125method B: 2017

284 CHEMICAL- WATER Waste Water Nitrate IS 3025 (Part34)Reaffirmed2019:1988, APHA 23rdEd 4500 -NO3- : 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 33 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 35: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

285 CHEMICAL- WATER Waste Water Nitrite IS 3025 (Part34)Reaffirmed2019:1988, APHA 23rdEd 4500 -NO2- : 2017

286 CHEMICAL- WATER Waste Water pH IS 3025 (Part11)Reaffirmed2017:1983,APHA 23rdEd 4500 - H+: 2017

287 CHEMICAL- WATER Waste Water Phosphates (as P) IS 3025 (Part31)Reaffirmed2019:1988, APHA 23rdEd.4500: 2017

288 CHEMICAL- WATER Waste Water Potassium (as K) APHA 23rd Ed 3500 -K method B: 2017

289 CHEMICAL- WATER Waste Water Selenium (as Se) IS 15303 Reaffirmed2014:2003, APHA 23rdEd 3125 method B:2017

290 CHEMICAL- WATER Waste water Silica (as Si) IS 3025 (Part 35)Reaffirmed 2019: 1988

291 CHEMICAL- WATER Waste Water Sodium (as Na) IS 3025 (Part 45)Reaffirmed 2019:1993,APHA 23rd Ed 3500 -Na method C: 2017

292 CHEMICAL- WATER Waste Water Strontium APHA 23rd Ed 3500 -Sr method B: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 34 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 36: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

293 CHEMICAL- WATER Waste Water Sulphate (as SO4 ) IS 3025 (Part24)Reaffirmed2019:1986, APHA 23rdEd 4500 - SO42- C:2017

294 CHEMICAL- WATER Waste water Sulphite (as SO3) APHA 23rd Ed. 4500 -SO32- : 2017

295 CHEMICAL- WATER Waste Water Suspended Solids IS 3025 (Part17)Reaffirmed2017:1984 , APHA23rd Ed 2540 methodD: 2017

296 CHEMICAL- WATER Waste water Temperature IS 3025 (Part9)Reaffirmed2017:1984, APHA 23rdEd. 2550 -method B:2017

297 CHEMICAL- WATER Waste water Total dissolved Solids IS 3025 (Part16)Reaffirmed2017:1984, APHA 23rdEd. 2540 -method C:2017

298 CHEMICAL- WATER Waste water Total hardness (as CaCO3 ) IS 3025 (Part21)Reaffirmed2019:2009: APHA 23rdEd. 2340 -method B &C: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 35 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 37: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

299 CHEMICAL- WATER Waste Water Total Kjeldhal’s Nitrogen IS 3025 (Part34)Reaffirmed2019:1988,APHA 23rdEd. 4500- N orgmethod B & C: 2017

300 CHEMICAL- WATER Waste Water Total solids IS 3025 (Part15)Reaffirmed2019:1984, APHA 23rdEd. 2540 : 2017

301 CHEMICAL- WATER Waste water Zinc (as Zn) IS 3025 (Part49)Reaffirmed2019:1994, APHA 23rdEd. 3125 method B:2017

302 CHEMICAL- WATER Water Turbidity IS 3025 (Part 10)Reaffirm Year 2017,APHA 22nd Ed. 20122130 -method B: 1984

303 CHEMICAL- WATER Water Turbidity IS 3025 (Part 10)Reaffirm Year 2017,APHA 22nd Ed. 20122130 -method B: 1984

304 CHEMICAL- WATER Water for Construction Purpose Chloride (as Cl) IS 3025 (Part 32)Reaffirmed 2019 :1988,APHA 23rd Ed 4500-Clmethod B: 2017

305 CHEMICAL- WATER Water for Construction Purpose Inorganic solids IS 3025 (Part 18)Reaffirmed 2017: 1984

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 36 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 38: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

306 CHEMICAL- WATER Water for Construction Purpose Neutralization with 0.02 N H2SO4 IS 3025 (Part 23)Reaffirmed 2019 :1986,APHA 23rd Ed 2320-method B: 2017

307 CHEMICAL- WATER Water for Construction Purpose Neutralization with 0.02 N NaOH IS 3025 (Part 22)Reaffirmed 2019 : 1986APHA 23rd Ed 2310-method B: 2017

308 CHEMICAL- WATER Water for Construction Purpose Organic solids IS 3025 (Part 18)Reaffirmed 2017: 1984

309 CHEMICAL- WATER Water for Construction Purpose pH IS 3025 (Part 11)Reaffirmed 2017 :1983, APHA 23rd Ed4500 - H+: 2017

310 CHEMICAL- WATER Water for Construction Purpose Sulphate IS 3025 (Part24)Reaffirmed 2019 :1986, APHA 23rd Ed4500 - SO42- C: 2017

311 CHEMICAL- WATER Water for Construction Purpose Suspended Solids IS 3025 : (Part17)Reaffirmed 2017 :1984 , APHA 23rd Ed.2540 – method D: 2017

312 CHEMICAL- WATER Water for Irrigation Purpose Alkalinity IS 3025 (Part23)Reaffirmed2019:1986, APHA 23rdEd 2320 method B:2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 37 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 39: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

313 CHEMICAL- WATER Water for Irrigation Purpose Boron (as B) IS 3025 (Part57)Reaffirmed2017:2005, APHA 23rdEd 3500 method B:2017

314 CHEMICAL- WATER Water for Irrigation Purpose Calcium (as Ca) IS 3025 (Part-40)Reaffirmed2019:1991, APHA 23rdEd 3500- Ca method B& 3120 method B: 2017

315 CHEMICAL- WATER Water for Irrigation Purpose Electrical Conductivity IS 3025 (Part14)Reaffirmed 2019:1984

316 CHEMICAL- WATER Water for Irrigation Purpose Magnesium (as Mg) IS 3025 (Part46)Reaffirmed2019:1994,APHA 23rdEd 3500 -Mg methodB: 2017

317 CHEMICAL- WATER Water for Irrigation Purpose Nitrate IS 3025 (Part34)Reaffirmed2019:1988, APHA 23rdEd 4500 -NO3- : 2017

318 CHEMICAL- WATER Water for Irrigation Purpose pH IS 3025 (Part 11)Reaffirmed2017:1983,APHA 23rdEd 4500 - H+: 2017

319 CHEMICAL- WATER Water for Irrigation Purpose Potassium (as K) APHA 23rd Ed 3500 -K method B: 2017

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 38 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 40: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

320 CHEMICAL- WATER Water for Irrigation Purpose Sodium (as Na) IS 3025 (Part 45)Reaffirmed 2019:1993,APHA 23rd Ed 3500 -Na method C: 2017

321 CHEMICAL- WATER Water for Irrigation Purpose Sodium adsorption ratio IS 11624 Reaffirmed2015: 1986

322 CHEMICAL- WATER Water for Irrigation Purpose Total dissolved Solids IS 3025 (Part16)Reaffirmed2017:1984, APHA 23rdEd. 2540 -method C:2017

323 MECHANICAL-BUILDINGSMATERIALS

Cast iron Manhole Cover Dimension Test IS 1726, Reaffirmed2017: 1991

324 MECHANICAL-BUILDINGSMATERIALS

Cast iron Manhole Cover Load Test IS 1726, Reaffirmed2017: 1991

325 MECHANICAL-BUILDINGSMATERIALS

Precast Concrete Manhole Cover Load Test IS 12592, Reaffirmed2013: 2002

326 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

10% Fines Value IS 2386 Part 5,Reaffirmed 2016: 1963

327 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Abrasion value IS 2386 Part 4,Reaffirmed 2016: 1963

328 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Bulk density IS 2386 Part 4,Reaffirmed 2016: 1963

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 39 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 41: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

329 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Crushing value IS 2386 Part 4,Reaffirmed 2016: 1963

330 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Deleterious Material IS 2386 Part 1,Reaffirmed 2016: 1963

331 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Elongation Index IS 2386 Part 1,Reaffirmed 2016: 1963

332 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Flakiness index IS 2386 Part 1,Reaffirmed 2016: 1963

333 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Impact value IS 2386 Part 3,Reaffirmed 2016: 1963

334 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Sieve analysis (Gradation) IS 2386 Part1,Reaffirmed 2016:1963

335 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Soundness by MgSO4 IS 2386 Part 5,Reaffirmed 2016: 1963

336 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Soundness by Na2SO4 IS 2386 Part 5,Reaffirmed 2016: 1963

337 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Specific gravity IS 2386 Part 3,Reaffirmed 2016 : 1963

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 40 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 42: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

338 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Coarse, Gradedaggregates, Key aggregate, StoneMetal, Ballast)

Water absorption IS 2386 Part 1,Reaffirmed 2016: 1963

339 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Fine, Stone dust, Sand, Crusher dust, Binding & Screeningmaterial)

Bulk density IS 2386 Part 3: 1963

340 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Fine, Stone dust, Sand, Crusher dust, Binding & Screeningmaterial)

Material Finer than 75 micron IS 2386 Part 1,Reaffirmed 2016: 1963

341 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Fine, Stone dust, Sand, Crusher dust, Binding & Screeningmaterial)

Sieve analysis (Gradation) IS 2386 Part 1,Reaffirmed 2016: 1963

342 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Fine, Stone dust, Sand, Crusher dust, Binding & Screeningmaterial)

Specific gravity IS 2386 Part 3,Reaffirmed 2016: 1963

343 MECHANICAL-BUILDINGSMATERIALS

Aggregates (Fine, Stone dust, Sand, Crusher dust, Binding & Screeningmaterial)

Water absorption IS 2386 Part 3,Reaffirmed 2016: 1963

344 MECHANICAL-BUILDINGSMATERIALS

Autoclaved Aerated Cellular Block Density IS 6441 (Part 1)Reaffirmed 2017: 1972

345 MECHANICAL-BUILDINGSMATERIALS

Autoclaved Aerated Cellular Blocks Compressive Strength IS 6441 (Part 5)Reaffirmed 2017: 1972

346 MECHANICAL-BUILDINGSMATERIALS

Autocleaved Aerated Cellular Block Drying Shrinkage 6441 (Part 2 )Reaffirmed Year 2017:1972

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 41 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 43: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

347 MECHANICAL-BUILDINGSMATERIALS

Autocleaved Aerated CellularBlocks

Dimensions IS 2185 (Part 3)Reaffirmed 2015: 1984

348 MECHANICAL-BUILDINGSMATERIALS

Bitumen Absolute Viscosity IS 1206 Part2,Reaffirmed 2014:1978

349 MECHANICAL-BUILDINGSMATERIALS

Bitumen Ductility IS 1208, Reaffirmed2014: 1978

350 MECHANICAL-BUILDINGSMATERIALS

Bitumen Kinematic Viscosity IS 1206 Part 3,Reaffirmed 2014: 1978

351 MECHANICAL-BUILDINGSMATERIALS

Bitumen Loss on Heating IS 1212, Reaffirmed2014: 1978

352 MECHANICAL-BUILDINGSMATERIALS

Bitumen Matter Soluble in Trichloroethylene IS 1216, Reaffirmed2014: 1978

353 MECHANICAL-BUILDINGSMATERIALS

Bitumen Penetration at 25oC (1/10mm) IS 1203, Reaffirmed2013: 1978

354 MECHANICAL-BUILDINGSMATERIALS

Bitumen Softening Point IS 1205, Reaffirmed2014: 1978

355 MECHANICAL-BUILDINGSMATERIALS

Bitumen Specific Gravity IS 1202, Reaffirmed2013: 1978

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 42 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 44: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

356 MECHANICAL-BUILDINGSMATERIALS

Bitumen Thin Film oven test - Loss in mass IS 9382, Reaffirmed2014: 1979

357 MECHANICAL-BUILDINGSMATERIALS

Bituminous Concrete Mix Binder content IRC SP 11 : 1984

358 MECHANICAL-BUILDINGSMATERIALS

Bituminous Concrete Mix Density of the mix ASTM D 2726 : 14:2017

359 MECHANICAL-BUILDINGSMATERIALS

Bituminous Concrete Mix Marshall flow ASTM D6927-15: 2015

360 MECHANICAL-BUILDINGSMATERIALS

Bituminous Concrete Mix Marshall stability ASTM D6927-15: 2015

361 MECHANICAL-BUILDINGSMATERIALS

Burnt Clay bricks, Fly Ash Bricks Compressive strength IS 3495 Part 1,Reaffirmed 2016: 1992

362 MECHANICAL-BUILDINGSMATERIALS

Burnt Clay bricks, Fly Ash Bricks Dimensions IS 1077, Reaffirmed2016, IS 13757Reaffirmed 2016: 1992

363 MECHANICAL-BUILDINGSMATERIALS

Burnt Clay bricks, Fly Ash Bricks Efflorescence IS 3495 Part 3,Reaffirmed 2016: 1992

364 MECHANICAL-BUILDINGSMATERIALS

Burnt Clay bricks, Fly Ash Bricks Water absorption IS 3495 Part 2,Reaffirmed 2016: 1992

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 43 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 45: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

365 MECHANICAL-BUILDINGSMATERIALS

Cement (OPC, PPC, SRC, PSC) Fineness (Blains) IS 4031 Part 2,Reaffirmed 2018: 1999

366 MECHANICAL-BUILDINGSMATERIALS

Cement(OPC, PPC,SRC, PSC) Setting Time IS 4031 Part 5,Reaffirmed 2019: 1998

367 MECHANICAL-BUILDINGSMATERIALS

Cement(OPC, PPC,SRC, PSC) Soundness (Le Chatlier) IS 4031 Part 3,Reaffirmed 2019: 1988

368 MECHANICAL-BUILDINGSMATERIALS

Cement(OPC,PPC,SRC,PSC) Drying Shrinkage IS 4031 Part 10,Reaffirmed 2019: 1988

369 MECHANICAL-BUILDINGSMATERIALS

Cement(OPC,PPC,SRC,PSC) Compressive Strength IS 4031 Part 6,Reaffirmed 2019: 1988

370 MECHANICAL-BUILDINGSMATERIALS

Cement(OPC,PPC,SRC,PSC) Consistency IS 4031 Part 4,Reaffirmed 2019: 1988

371 MECHANICAL-BUILDINGSMATERIALS

Cement(OPC,PPC,SRC,PSC) Density IS 4031 Part 11,Reaffirmed 2019: 1988

372 MECHANICAL-BUILDINGSMATERIALS

Cement(OPC,PPC,SRC,PSC) Fineness by Dry Sieve IS 4031 Part 1,Reaffirmed 2016: 1996

373 MECHANICAL-BUILDINGSMATERIALS

Cement(OPC,PPC,SRC,PSC) Soundness (Autoclave) IS 4031 : 2014

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 44 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 46: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

374 MECHANICAL-BUILDINGSMATERIALS

Concrete (Hardened), Cube,Cylinder, Core, Beam

Modulus of Elasticity IS 516, Reaffirmed2018 : 1959

375 MECHANICAL-BUILDINGSMATERIALS

Concrete (Hardened), Cube,Cylinder, Core, Beam

Water Penetration of Concrete Morth Specification /DIN 1048: 1965

376 MECHANICAL-BUILDINGSMATERIALS

Concrete (Hardened), Cube,Cylinder, Core, Beam

Compressive Strength IS 516. Reaffirmed2018 : 1959

377 MECHANICAL-BUILDINGSMATERIALS

Concrete (Hardened), Cube,Cylinder, Core, Beam

Flexural Strength IS 516, Reaffirmed2018 : 1959

378 MECHANICAL-BUILDINGSMATERIALS

Flooring Tiles (Ceramic/ GlazedVitrified)

Breaking Strength IS 13630 Part 6,Reaffirmed 2017: 2006

379 MECHANICAL-BUILDINGSMATERIALS

Flooring Tiles (Ceramic/ GlazedVitrified)

Dimensions & Surface quality IS 13630 Part 1,Reaffirmed 2017 : 2006

380 MECHANICAL-BUILDINGSMATERIALS

Flooring Tiles (Ceramic/ GlazedVitrified)

Flatness IS 13630 Part 1,Reaffirmed 2017: 2006

381 MECHANICAL-BUILDINGSMATERIALS

Flooring Tiles (Ceramic/ GlazedVitrified)

Modulus of Rupture IS 13630 Part 6,Reaffirmed 2017: 2006

382 MECHANICAL-BUILDINGSMATERIALS

Flooring Tiles (Ceramic/ GlazedVitrified)

Perpendicularity IS 13630 Part 1,Reaffirmed 2017: 2006

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 45 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 47: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

383 MECHANICAL-BUILDINGSMATERIALS

Flooring Tiles (Ceramic/ GlazedVitrified)

Scratch hardness(Moh’s Hardness) IS 13630 Part 13,Reaffirmed 2017: 2006

384 MECHANICAL-BUILDINGSMATERIALS

Flooring Tiles (Ceramic/ GlazedVitrified)

Straightness IS 13630 part 1,Reaffirmed 2017: 2006

385 MECHANICAL-BUILDINGSMATERIALS

Flooring Tiles (Ceramic/GlazedVitrified)

Water absorption IS 13630 Part 2,Reaffirmed 2017: 2006

386 MECHANICAL-BUILDINGSMATERIALS

Fresh Concrete/ Admixtures Air content IS 1199, Reaffirmed2018: 1959

387 MECHANICAL-BUILDINGSMATERIALS

Fresh Concrete/ Admixtures Bleeding IS 9103, Reaffirmed2018: 1999

388 MECHANICAL-BUILDINGSMATERIALS

Fresh Concrete/ Admixtures Flexural Strength IS 516, Reaffirmed2018: 1959

389 MECHANICAL-BUILDINGSMATERIALS

Fresh Concrete/ Admixtures Flow IS 9103, Reaffirmed2018: 1999

390 MECHANICAL-BUILDINGSMATERIALS

Fresh Concrete/ Admixtures Setting Time IS 8142, Reaffirmed2016: 1976

391 MECHANICAL-BUILDINGSMATERIALS

Fresh Concrete/ Admixtures Slump IS 9103, Reaffirmed2018: 1999

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 46 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 48: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

392 MECHANICAL-BUILDINGSMATERIALS

Hardened Concrete Rapid Chloride Ion PenetrationResistance through ElectricalConductance

ASTM C1202: 2019

393 MECHANICAL-BUILDINGSMATERIALS

Pozzolana (Fly ash /GGBS, FuelAsh , Bottom Ash, Micro silica)

Lime reactivity IS 1727, Reaffirmed2018: 1967

394 MECHANICAL-BUILDINGSMATERIALS

Pozzolana (Fly ash /GGBS, FuelAsh, Bottom Ash, Micro silica)

Soundness by Le-Chatlier IS 1727, Reaffirmed2018 : 1967

395 MECHANICAL-BUILDINGSMATERIALS

Pozzolana (Fly ash/GGBS, FuelAsh , Bottom Ash, Micro silica)

Compressive strength IS 1727, Reaffirmed2018: 1967

396 MECHANICAL-BUILDINGSMATERIALS

Pozzolana (Fly ash/GGBS, FuelAsh , Bottom Ash, Micro silica)

Soundness by Autoclave IS 1727, Reaffirmed2018 : 1967

397 MECHANICAL-BUILDINGSMATERIALS

Pozzolana(Fly ash / GGBS, FuelAsh , Bottom Ash, Micro silica)

Fineness- Specific surface (Blains) IS 1727, Reaffirmed2018 : 1967

398 MECHANICAL-BUILDINGSMATERIALS

Pozzolana(Fly ash /GGBS, FuelAsh , Bottom Ash, Micro silica)

Setting time IS 1727, Reaffirmed2018 : 1967

399 MECHANICAL-BUILDINGSMATERIALS

Pozzolana(Fly ash/GGBS, FuelAsh, Bottom Ash, Micro silica)

Sieve Analysis (45 micronsretained)

IS 1727, Reaffirmed2018 : 1967

400 MECHANICAL-BUILDINGSMATERIALS

Pozzolana(Flyash/GGBS, Fuel Ash,Bottom Ash, Micro silica)

Specific Gravity IS 1727, Reaffirmed2018 : 1967

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 47 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 49: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

401 MECHANICAL-BUILDINGSMATERIALS

Precast Concrete Blocks, Paverblock

Abrasion Resistance(Loss involume)

IS 15658, Reaffirmed2017: 2006

402 MECHANICAL-BUILDINGSMATERIALS

Precast Concrete Blocks, Paverblock

Compressive Strength IS 15658 Reaffirmed2017, IS 2185 Part 1,Reaffirmed 2015 :2005:2006

403 MECHANICAL-BUILDINGSMATERIALS

Precast Concrete Blocks, Paverblock

Dimensions IS 15658. Reaffirmed2017 : 2006

404 MECHANICAL-BUILDINGSMATERIALS

Precast Concrete Blocks, Paverblock

Water absorption IS 15658, Reaffirmed2017: 2006

405 MECHANICAL-BUILDINGSMATERIALS

Precast Concrete Manhole Cover Dimension Test IS 12592, Reaffirmed2013: 2002

406 MECHANICAL-MECHANICALPROPERTIES OFMETALS

Reinforcement Steel StructuralSteel

Tensile Strength IS 1608 Part 1: 2018

407 MECHANICAL-MECHANICALPROPERTIES OFMETALS

Reinforcement Steel StructuralSteel

Yield Strength/ 0.2% Proof stress,N/mm2

IS 1608 Part 1: 2018

408 MECHANICAL-MECHANICALPROPERTIES OFMETALS

Reinforcement Steel StructuralSteel Steel

Bend Test IS 1599, Reaffirmed2017: 2012

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 48 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 50: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

409 MECHANICAL-MECHANICALPROPERTIES OFMETALS

Reinforcement Steel StructuralSteel Steel

Elongation, % IS 1608 Part 1: 2018

410 MECHANICAL-MECHANICALPROPERTIES OFMETALS

Reinforcement Steel StructuralSteel Steel

Mass per Meter, Kg/m IS 1786, Reaffirmed2013: 2008

411 MECHANICAL-MECHANICALPROPERTIES OFMETALS

Reinforcement Steel StructuralSteel Steel

Re-bend Test IS 1786, Reaffirmed2013: 2008

412 MECHANICAL-MECHANICALPROPERTIES OFMETALS

Wire Strand 0.2% Proof Load IS 14268 : 2017

413 MECHANICAL-MECHANICALPROPERTIES OFMETALS

Wire Strand Breaking Strength of Strand IS 14268 : 2017

414 MECHANICAL-MECHANICALPROPERTIES OFMETALS

Wire Strand Elongation IS 14268 : 2017

415 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS

PVC Pipe/ SWR Pipe/CPVC/HDPE/UPVC

Dimension IS 12235 Part1,Reaffirmed 2014:2004

416 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS

PVC Pipe/ SWR Pipe/CPVC/HDPE/UPVC

Hardness Shore D IS 13360 (Part 5 / Sec11) , Reaffirmed 2018:2013

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 49 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 51: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

417 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS

PVC Pipe/ SWR Pipe/CPVC/HDPE/UPVC

Heat ( Vicat ) softening point IS 12235 Part 2,Reaffirmed 2014: 2004

418 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS

PVC Pipe/ SWR Pipe/CPVC/HDPE/UPVC

Hydrostatic Pressure test IS 13592 ,Reaffirmed2018: 2013

419 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS

PVC Pipe/ SWR Pipe/CPVC/HDPE/UPVC

Density IS 12235 Part 14,Reaffirmed 2014: 2004

420 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS

PVC Pipe/ SWR Pipe/CPVC/HDPE/UPVC

Resistance to external blows IS 4985, Reaffirmed2015: 2000

421 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS

PVC Pipe/ SWR Pipe/CPVC/HDPE/UPVC

Reversion test of pipe IS 12235 Part 5,Reaffirmed 2014: 2004

422 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS

PVC Pipe/ SWR Pipe/CPVC/HDPE/UPVC

Tensile Strength IS12235 Part13,Reaffirmed 2014 :2004

423 MECHANICAL- SOILAND ROCK

Bentonite Density of Slurry ASTM D4380: 2012

424 MECHANICAL- SOILAND ROCK

Bentonite Liquid Limit IS 2720 (Part 5)): 1985RA 2015

425 MECHANICAL- SOILAND ROCK

Bentonite Marsh Cone Viscosity ASTM D6910: 2019

426 MECHANICAL- SOILAND ROCK

Bentonite Moisture Content IS 2720 (Part 2): 1973RA 2015

427 MECHANICAL- SOILAND ROCK

Bentonite Sand Content by Grain SizeAnalysis (0.075 to 4.75 mm)

IS 2720 (Part 4): 1985RA 2015

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 50 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 52: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

428 MECHANICAL- SOILAND ROCK

Bentonite Swelling Power IS 6186: 1986 RA2015; Annexure A-5

429 MECHANICAL- SOILAND ROCK

Rock Density IS 13030: 1991 RA2016

430 MECHANICAL- SOILAND ROCK

Rock Point Load Index IS 8764: 1998 RA 2014

431 MECHANICAL- SOILAND ROCK

Rock Porosity IS 13030: 1991 RA2016

432 MECHANICAL- SOILAND ROCK

Rock Scratch Hardness IS 13630 (Part 13):2006 RA 2016

433 MECHANICAL- SOILAND ROCK

Rock Slake Durability Index IS 10050: 1981 2016

434 MECHANICAL- SOILAND ROCK

Rock Specific Gravity IS 1124: 1974 RA 2017

435 MECHANICAL- SOILAND ROCK

Rock Tensile Strength by Brazilian Test IS 10082: 1981 RA2016

436 MECHANICAL- SOILAND ROCK

Rock Unconfined Compressive Strength IS 9143: 1979 RA 2016

437 MECHANICAL- SOILAND ROCK

Soil California Bearing Ratio IS 2720 (Part 16): 1987RA 2016

438 MECHANICAL- SOILAND ROCK

Soil Consolidation - Pre ConsolidationPressure, PcCompression Index,CcRange 0.1 to 0.5MU 0.03 @ 0.3

IS 2720 (Part 15): 1986RA 2016

439 MECHANICAL- SOILAND ROCK

Soil Direct Shear - Cohesion, CAngle ofShearing ResistanceRange 10 to60°MU 2.91 @ 28.41°

IS 2720 (Part 13): 1986RA 2016

440 MECHANICAL- SOILAND ROCK

Soil Free Swell Index IS 2720 (Part 40): 1977RA 2016

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 51 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 53: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

441 MECHANICAL- SOILAND ROCK

Soil Grain Size Analysis (0.075 to4.75mm)Hydrometer AnalysisRangeupto 100%MU 2.62 @ 15.60%

IS 2720 (Part 4): 1985RA 2015

442 MECHANICAL- SOILAND ROCK

Soil Heavy Compaction - Maximum DryDensityOptimum MoistureContentRange 5 to 25%MU 1.182@ 11.65%

IS 2720 (Part 8): 1983RA 2015

443 MECHANICAL- SOILAND ROCK

Soil Light Compaction - Maximum DryDensityOptimum MoistureContentRange 5 to 30%MU 0.91 @15.2%

IS 2720 (Part 7): 1980RA 2016

444 MECHANICAL- SOILAND ROCK

Soil Liquid limit IS 2720 (Part 5): 1985RA 2015

445 MECHANICAL- SOILAND ROCK

Soil Permeability IS 2720 (Part 17): 1986RA 2016

446 MECHANICAL- SOILAND ROCK

Soil Plastic limit IS 2720 (Part 5): 1985RA 2015

447 MECHANICAL- SOILAND ROCK

Soil Relative Density (Density Max &Min)

IS 2720 (Part 14): 1983RA 2015

448 MECHANICAL- SOILAND ROCK

Soil Shrinkage Limit IS 2720 (Part 6): 1972RA 2016

449 MECHANICAL- SOILAND ROCK

Soil Specific Gravity IS 2720 (Part 3 / Sec1):1980 RA 2016

450 MECHANICAL- SOILAND ROCK

Soil Swelling Pressure IS 2720 (Part 41): 1977RA 2016

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 52 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 54: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

451 MECHANICAL- SOILAND ROCK

Soil Triaxial Compression - Cohesion,CAngle of ShearingResistanceRange upto 40°MU [email protected]°2. IS 2720 Part 12 1981 RA2016

IS 2720 (Part 11): 1993RA 2016

452 MECHANICAL- SOILAND ROCK

Soil Unconfined Compression Strength IS 2720 (Part 10): 1991RA 2015

453 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Buckling IS 4020 (Part 9)Reaffirmed 2018: 1998

454 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Dimension IS 4020 (Part 2)Reaffirmed 2018: 1998

455 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Edge loading IS 4020 (Part 7)Reaffirmed 2018: 1998

456 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) End immersion test IS 4020 (Part 13)Reaffirmed 2018: 1998

457 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Flexure Test IS 4020 (Part 6)Reaffirmed 2018: 1998

458 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Glue adhesion test IS 4020 (Part 25): 1998

459 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Impact Indentation IS 4020 (Part 5)Reaffirmed 2018: 1998

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 53 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 55: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

460 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Knife test IS 4020 (Part 14)Reaffirmed 2018: 1998

461 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Misuse test IS 4020 (Part 11)Reaffirmed 2018: 1998

462 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Moisture IS 2202 (Part 1)Reaffirmed 2017: 1999

463 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Screw withdrawal strength IS 4020 Part 16Reaffirmed 2018: 1998

464 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Shock Resistance IS 4020 (Part 8)Reaffirmed 2018: 1998

465 MECHANICAL- WOODAND WOODPRODUCTS

Flush door shutter (Plywood/PVC) Slamming test IS 4020 (Part 10)Reaffirmed 2018: 1998

466 MECHANICAL- WOODAND WOODPRODUCTS

Plywood (General, Marine,Concrete Shuttering, Decorative,PVC, WPC

Glue shear strength IS 1734 Part 4Reaffirmed 2013: 1983

467 MECHANICAL- WOODAND WOODPRODUCTS

Plywood (General, Marine,Concrete Shuttering, Decorative,PVC, WPC)

Adhesion of plies IS 1734 Part 5Reaffirmed 2013: 1983

468 MECHANICAL- WOODAND WOODPRODUCTS

Plywood (General, Marine,Concrete Shuttering, Decorative,PVC, WPC)

Moisture content IS 1734 Part 1Reaffirmed 2013: 1983

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 54 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 56: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

469 MECHANICAL- WOODAND WOODPRODUCTS

Plywood (General, Marine,Concrete Shuttering, Decorative,PVC, WPC)

Static bending Strength Modulus ofRupture

IS 1734 Part 11Reaffirmed 2013: 1983

470 MECHANICAL- WOODAND WOODPRODUCTS

Plywood (General, Marine,Concrete Shuttering, Decorative,PVC, WPC)

Tensile strength Along the grain IS 1734 Part 9Reaffirmed 2013: 1983

471 MECHANICAL- WOODAND WOODPRODUCTS

Plywood (General, Marine,Concrete Shuttering, Decorative,PVC, WPC)

Water resistance (Glue shearstrength)

IS 1734 Part 6Reaffirmed 2013: 1983

472 MECHANICAL- WOODAND WOODPRODUCTS

Timber/ Wood Density IS 1708 Reaffirmed2015: 1986

473 MECHANICAL- WOODAND WOODPRODUCTS

Timber/ Wood Moisture IS 287: Reaffirmed2017 1993IS 11215:1993

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 55 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 57: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

Site Facility

1 MECHANICAL- SOILAND ROCK

Soil Block Vibration by Foced Vibration -Coefficient of Elastic UniformCompression, Cu

IS 5249: 1992 RA 2015

2 MECHANICAL- SOILAND ROCK

Soil Dry Density by Core Cutter Method IS 2720 (Part 29): 1975RA 2015

3 MECHANICAL- SOILAND ROCK

Soil Dynamic Cone Penetration IS 4968 Part 1 & 2Reaffirmed 2016: 1976

4 MECHANICAL- SOILAND ROCK

Soil Earth Resistivity by Wenner's FourElectrode method

IS 3043: 2018

5 MECHANICAL- SOILAND ROCK

Soil Load Test on Piles1. CompressionLoad TestRange 5 to 1800 MT2.Lateral Load TestRange 1 to 100MT3. Pull-out Load TestRange 1 to100 MT

IS 2911 (Part 4): 2013RA 2018

6 MECHANICAL- SOILAND ROCK

Soil Modulus of Subgrade Reaction (K-Value)

IS 9214: 1979 RA 2016

7 MECHANICAL- SOILAND ROCK

Soil Plate Load Test IS 1888: 1982 RA 2016

8 MECHANICAL- SOILAND ROCK

Soil Standard Penetration IS 2131: 1981 RA 2016

9 NON-DESTRUCTIVE-BUILDINGMATERIALS -REINFORCEDCONCRETESTRUCTURES

Reinforced Concrete Pile Low Strain Impact Integrity onPilesRange 3200 to 4500 m/sMU 50@ 3875 m/s

ASTM D5882: 2016

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 56 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 58: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

Site Facility

10 NON-DESTRUCTIVE-BUILDINGMATERIALS -REINFORCEDCONCRETESTRUCTURES

Reinforced Concrete Structures Depth of Carbonation BS EN 14630: 2006

11 NON-DESTRUCTIVE-BUILDINGMATERIALS -REINFORCEDCONCRETESTRUCTURES

Reinforced Concrete Structures Depth of Cover BS 1881 Part 204:1988

12 NON-DESTRUCTIVE-BUILDINGMATERIALS -REINFORCEDCONCRETESTRUCTURES

Reinforced Concrete Structures Half Cell Potential Difference ASTM C876: 2015

13 NON-DESTRUCTIVE-BUILDINGMATERIALS -REINFORCEDCONCRETESTRUCTURES

Reinforced Concrete Structures Rebound Hammer IS 13311 (Part 2): 1992RA: 2013

14 NON-DESTRUCTIVE-BUILDINGMATERIALS -REINFORCEDCONCRETESTRUCTURES

Reinforced Concrete Structures Ultrasonic Pulse Velocity IS 516 (Part 5 / Sec 1):2018

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 57 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019

Page 59: TESTING ISO/IEC 17025:2017 RESEARCH PVT. LTD. GEO TEST ...geogroup.in/UploadImage/scopelist1.pdf · has been assessed and accredited in accordance with the standard ISO/IEC 17025:2017

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

Site Facility

'NOTE- The Laboratory has demonstrated competence for the stated scope for WATER. This however does not fully cover thespecification requirements of BIS for the Packaged Drinking Water as per IS 14543 and the Packaged Natural Mineral Water IS13428.'

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name GEO TEST HOUSE - A DIVISION OF GEO DESIGNS & RESEARCH PVT. LTD., B-10,KRISHNA INDUSTRIAL ESTATE, GORWA, VADODARA, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6166 Page No. : 58 / 58

Validity 10/08/2019 to 09/08/2021 Last Amended on 26/09/2019


Recommended