t e s t i n g t o p e r f e c t i o n

Digital Force & Torque Gauges

Advanced Force Gauge

The Advanced Force Gauge (AFG) is the most versatile and fully-featured digital force gauge on the market. It can be used hand-held or fixed to a manual or motorised test stand to allow testing under controlled speed conditions. The AFG is fitted with a high-precision “internal” loadcell accurate to ±0.1% of full scale. For added flexibility the AFG is able to recognise data from a range of external ‘Smart’ force and torque sensors, so you can use it as a universal display for remote applications (see pages 5 to 10).

• Accuracy ±0.1% of full-scale• 10 capacities - from 2.5 N to 2500 N• Peak capture - Ultimate max + 1st peak• Data output - RS232, digimatic and analogue • Pass/Fail Alarms - audible and visual• Overload warning with trend bar• Wide range of grips and fixtures

Key Features:

Outstanding accuracy combined with extensive features

Mecmesin

RS232, Mitutoyo, Analogue data output for easy data transmission. A calibrated analogue output can be supplied as an option

Recognises data from a range of external force & torque transducers see pages 5-10

Highly Accurate to ±0.1% full-scale

View the 1st peak and ultimate peak readings On-board memory stores up to 500 readings

Internal loadcell stud for quick and easy change of accessories and fixtures. Loadcell stud 10-32 UNF male (5/16 UNC male for AFG 1000 N & 2500 N)

Reversible display - view readings even when the gauge is positioned away from you

Audible & visual pass/fail alarms set a threshold for immediate alert when limits are exceeded

Measurements made in N, kN, mN, lbf, ozf, kgf and gf with a sampling rate of 5000 Hz

Rugged metal housing ideal for factory or outdoor use

AFG and accessories shown in carry case

The dual level design of the keypad ensures that operation of this powerful gauge is simple, thereby making it ideal for use from production shop floor to R&D.

Housed in an ergonomically shaped, rugged aluminium case, the AFG is powered by either mains-adaptor or standard rechargeable AAA batteries.

All models carry CE marking and are supplied in a robust carrying case with standard accessories and a calibration certificate traceable to UK national standards.

See page 14 for details of accessories supplied.

• Accuracy ±0.1% of full scale • Full scale deflection of loadcell typically 0.5 mm

• Operating temperature 10°C - 35°C

Compression test on medical device

versatile rugged accurate

AFG shown mounted to the MultiTest-dV motorised test stand

Pull test on anchorage points

AFG Specification Table - Capacity & Resolution (eg 250 N x 0.05 N)

Mecmesin

Model Part No. mN N kN gf kgf ozf lbfAFG 2.5 850-412 2500 x 0.5 2.5 x 0.0005 - 250 x 0.05 - 9 x 0.002 0.55 x 0.0001AFG 5 850-413 5000 x 1 5 x 0.001 - 500 x 0.1 0.5 x 0.0001 18 x 0.005 1.1 x 0.0002AFG 10 850-414 10000 x 2 10 x 0.002 - 1000 x 0.2 1 x 0.0002 35 x 0.01 2.2 x 0.0005AFG 25 850-415 25000 x 5 25 x 0.005 - 2500 x 0.5 2.5 x 0.0005 90 x 0.02 5.5 x 0.001AFG 50 850-416 50000 x 10 50 x 0.01 - 5000 x 1 5 x 0.001 180 x 0.05 11 x 0.002AFG 100 850-417 - 100 x 0.02 - 10000 x 2 10 x 0.002 350 x 0.1 22 x 0.005AFG 250 850-418 - 250 x 0.05 - 25000 x 5 25 x 0.005 900 x 0.2 55 x 0.01AFG 500 850-419 - 500 x 0.1 - 50000 x 10 50 x 0.01 1800 x 0.5 110 x 0.02AFG 1000 850-420 - 1000 x 0.2 1 x 0.0002 - 100 x 0.02 3500 x 1 220 x 0.05AFG 2500 850-421 - 2500 x 0.5 2.5 x 0.0005 - 250 x 0.05 9000 x 2 550 x 0.1

The Advanced Force & Torque Indicator (AFTI) is a high-specification display unit with all the features and benefits of the AFG, for use with Mecmesin ‘Smart’ force and torque sensors. These plug one-at-a-time into the AFTI enabling it to automatically register either force or torque sensors for a variety of test applications. ‘Smart’ sensors may also be used with Mecmesin’s Advanced Force Gauge (AFG).

Advanced Force & Torque Indicator

These sensors are ideal for mounting onto your own test rigs and jigs to monitor load application. They can also be used for checking calibration of your machinery to assess whether it is applying the expected load.

Force

Torque

All the functions of the AFG but without the “internal” loadcell

Mecmesin

RS232, Mitutoyo, Analogue data output for easy data transmission

Overload warning with trend bar and on board memory of 500 readings

Tension, compression and torque measurement with full unit conversion of displayed value

Fully interchangeable ‘Smart’ sensors - No need for additional calibration of display or sensor, just ‘Plug & Play’

1st & ultimate peak capture

Measurements made in N, lbf, kgf, kN, N.m, kgf.cm, lbf.in, gf.cm and ozf.in with a sampling rate of 5000 Hz

force & torque plug-in sensors adaptable

‘Smart’ Force & Torque Sensors

Advanced Force & Torque Indicator

All sensors are fitted with 1.5 m cable length, are fully interchangeable and are supplied with Calibration Certificates traceable to UK National Standards. As standard they are delivered in cardboard transit cases.

• Sensors for torque, tension & compression• Calibration Certificates traceable to UK National Standards• Resolution - 1:5000 • Overload warning feature• 1.5 m cable length as standard - longer cable available upon request

Key Features:

Mecmesin

All dimensions quoted for the force and torque sensors are for reference only. Please contact the Mecmesin Sales Department for tolerance information if your application is dimensionally critical.

Overload protection by software warning is typically 120% of full scale for all items (without accessories), with additional mechanical overload protection being up to a minimum of 150% of full scale.

All gauges and sensors are calibrated under controlled laboratory conditions at a temperature of 20°C ±2°C. Resolution for all sensors is typically 1:5000 - e.g. a 5000 N loadcell resolves to 1 N.

Junior S-Beam - ‘Smart’

Tension & Compression Sensors

The Junior S-Beam is suitable for measuring tension and compression. Ideal for applications where available space is limited. Dedicated fixtures can be fitted via threaded holes.

L

W

H

THREAD

L

W

H

THREAD

S-Beam - ‘Smart’The S-Beam provides an economical solution to general force measurement applications where space is not restricted. Dedicated fixtures can be fitted via threaded holes.

L W

H

Thread

ø

H

Thread

CylindricalS-BeamAccuracy ±0.25% of full scale * Uni-directional calibration (please specify tension or compression)

Accuracy ±0.25% of full scale

“Smart” Sensors for use with AFTI display or Advanced Force Gauge (AFG)

** **

** 6mm added to the overall width of the central portion due to the protective cover

Mecmesin

Part No. Capacity L (mm) W (mm) H (mm) Thread870 – 101 1 N 100 gf 3.5 ozf 17.5 7 19 M3 x 0.5870 – 102 2.5 N 250 gf 9 ozf 17.5 7 19 M3 x 0.5870 – 103 5 N 500 gf 18 ozf 17.5 7 19 M3 x 0.5870 – 104 10 N 1 kgf 2.2 lbf 17.5 7 19 M3 x 0.5870 – 105 25 N 2.5 kgf 5.5 lbf 17.5 7 19 M3 x 0.5870 – 106 50 N 5 kgf 11 lbf 17.5 7 19 M3 x 0.5870 – 107 100 N 10 kgf 22 lbf 17.5 8 19 M3 x 0.5870 – 108 250 N 25 kgf 55 lbf 17.5 7 19 M3 x 0.5870 – 109 500 N 50 kgf 110 lbf 17.5 7 19 M3 x 0.5

Part No. Capacity L (mm) W (mm)** H (mm) Thread870 – 002 100 N 10 kgf 22 lbf 51 13 64 M6 x 1870 – 004 200 N 20 kgf 44 lbf 51 13 64 M6 x 1870 – 009 500 N 50 kgf 110 lbf 51 19 76 M6 x 1870 – 001 1000 N 100 kgf 220 lbf 51 19 76 M10 x 1.5870 – 006 2500 N 250 kgf 550 lbf 51 25 76 M12 x 1.75870 – 008 5000 N 500 kgf 1100 lbf 51 25 76 M12 x 1.75870 – 003 10 kN 1000 kgf 2200 lbf 51 25 76 M12 x 1.75870 – 007 25 kN 2500 kgf 5500 lbf 76 25 108 M16 x 2

Part No. Capacity Ø (mm) H (mm) Thread870 - 011 *50 kN 5000 kgf 11 000 lbf 70 120 M36 x 3870 - 010 *100 kN 10 000 kgf 22 000 lbf 70 120 M36 x 3

Cylindrical

Load Button Cell - ‘Smart’

Accuracy ±1% of full scale

Accuracy ±1% of full scale

Ø D2Ø D1

H1

H2

ØD2ØD1

H1

H2

Ø D3

T

Dimensions are approximate. Detailed drawings available upon request

The Load Button Cell is a miniature sensor for compression measurement only, where available space is very limited. For optimum results apply compressive load to the top of the sensor’s central dome.

Mecmesin

Part No. Capacity ØD1 (mm) ØD2 (mm) ØD3 (mm) H1 (mm) H2 (mm) T878 - 008 100 N 10 kgf 22 lbf 25 5 19 8 1.3 4/40UNC878 - 009 250 N 25 kgf 55 lbf 25 5 19 8 1.3 4/40UNC878 - 010 500 N 50 kgf 110 lbf 31 8 25 10 1.3 6/32UNC878 - 011 1000 N 100 kgf 220 lbf 31 8 25 10 1.3 6/32UNC878 - 012 2500 N 250 kgf 550 lbf 31 8 25 10 1.3 6/32UNC878 - 013 5000 N 500 kgf 1100 lbf 31 8 25 10 1.3 6/32UNC878 - 014 10 kN 1000 kgf 2200 lbf 31 8 25 10 1.3 6/32UNC878 - 015 20 kN 2000 kgf 5500 lbf 38 11 32 16 2 6/32UNC878 - 016 50 kN 5000 kgf 11 000 lbf 38 11 32 16 2 6/32UNC

Part No. Capacity ØD1 (mm) ØD2 (mm) H1 (mm) H2 (mm)878 - 002 100 N 10 kgf 22 lbf 19 5 6.4 0.6878 - 003 250 N 25 kgf 55 lbf 19 5 6.4 0.6878 - 004 500 N 50 kgf 110 lbf 19 5 6.4 0.6878 - 005 1000 N 100 kgf 220 lbf 19 5 6.4 0.6878 - 006 5000 N 500 kgf 1100 lbf 19 5 6.4 0.6

Load Button

Compression Only Sensors

Miniature Series

Sub-miniature Series

Static Torque Transducer - ‘Smart’ (mid & high-torque)For mounting to a bench or integrating into a complete test rig. Equipped with male square drive for easy fitting of adaptors.

Static Torque Sensors

H

W

D

H

W

D

Accuracy ±0.5% of full scale

“Smart” Sensors for use with AFTI display or Advanced Force Gauge (AFG)

Mecmesin

Model Part No. Capacity Sq Drive Male H (mm) W (mm) D (mm)ST1.5 872 - 001 1.5 N.m 15 kgf.cm 13 lbf.in 3/8” 75 60 70ST6 872 - 009 6 N.m 60 kgf.cm 53 lbf.in 3/8” 75 60 70ST10 872 - 004 10 N.m 100 kgf.cm 90 lbf.in 3/8” 75 60 70ST15 872 - 006 15 N.m 150 kgf.cm 133 lbf.in 3/8” 87 80 90ST60 872 - 008 60 N.m 600 kgf.cm 530 lbf.in 3/8” 87 80 90ST100 872 - 003 100 N.m 1000 kgf.cm 870 lbf.in 1/2” 93 80 90ST150 872 - 005 150 N.m 1500 kgf.cm 1300 lbf.in 1/2” 93 80 90ST600 872 - 007 600 N.m 6000 kgf.cm 5200 lbf.in 3/4” 113.5 78.7 100ST1000 872 - 002 1000 N.m 10000 kgf.cm 8850 lbf.in 1” 124 78.7 100

Model Part No. Capacity Drive H (mm) W (mm) D (mm)TT-ST0.05 872 - 030 50 mN.m 500 gf.cm 7 ozf.in Bore Ø3 H7 75 50 50TT-ST0.20 872 - 032 200 mN.m 2000 gf.cm 28 ozf.in Bore Ø3 H7 75 50 50TT-ST0.50 872 - 033 500 mN.m 5 kgf.cm 4.5 lbf.in ¼” HEX Socket 91 50 50TT-ST1 872 - 034 1 N.m 10 kgf.cm 9 lbf.in ¼” HEX Socket 91 50 50TT-ST2 872 - 035 2 N.m 20 kgf.cm 18 lbf.in ¼” HEX Socket 91 50 50

Static Torque Transducer – ‘Smart’ (low-torque)For mounting to a bench or integrating into a complete test rig. Equipped with ¼” HEX Socket or 3mm bore for fitting of adaptors.

Top View of all TT models

Bench Mounting StandPart No 432-401 suitable for ‘mid & high-torque’ ST Torque Sensors

Side view of TT-ST0.05 and TTST0.20

(Ø3 H7 bore)

Side view of TT-ST0.50, TT1 and TT-ST2

(¼” HEX Socket)Accuracy ±0.5% of full scale

Ø33 Ø18 Ø7,50

45,50

067

75,50

5041

-0,0146 -0,01

Ø3H7 (2x)

Ø33 Ø18 Ø10,50

0

21,7522,85

61,35

91,35

L

Øfor TS Model)

3/8” Drive

3/8”sq male driver

Mecmesin

Static ‘Mini’ Torque Screwdriver - ‘Smart’ (low-torque)For hand-held applications requiring the measurement of miniature torque below 1 N.m.Not suitable for applications, which require multiple rotations of the sensor - use Rotary Torque Transducers (see page 9).

Model Part No. Capacity Drive L1 (mm) Ø (mm)TTH0.01 871 - 100 10 mN.m 100 gf.cm 1 ozf.in Bore Ø3 H7 135 22TTH0.05 871 - 101 50 mN.m 500 gf.cm 7 ozf.in Bore Ø3 H7 135 22TTH0.10 871 - 102 100 mN.m 1000 gf.cm 14 ozf.in Bore Ø3 H7 135 22TTH0.20 871 - 105 200 mN.m 2000 gf.cm 28 ozf.in Bore Ø3 H7 135 22TTH0.50 871 - 103 500 mN.m 5 kgf.cm 4.5 lbf.in ¼” HEX Socket 151 22TTH1 871 - 104 1 N.m 10 kgf.cm 9 lbf.in ¼” HEX Socket 151 22

Accuracy ±0.5% of full scale

TTH0.01-TTH0.20 TTH0.50 and TTH1

Bore Ø3 H7 ¼” HEX Socket

Static Torque Screwdriver - ‘Smart’ (mid-torque)For mid capacity applications. Used as hand-held devices or may be mounted in a bench stand for stationary use Part No 432-402. Not suitable for applications, which require multiple rotations of the sensor - use Rotary Torque Transducers (see page 9).

Accuracy ±0.5% of full scale

Model Part No. Capacity Drive L (mm) Ø (mm) Weight (g)TS0.3 871-004 0.3 N.m 3 kgf.cm 2.6 lbf.in 3/8” sq male/3 jaw chuck 143 43 660TS1.5 871-002 1.5 N.m 15 kgf.cm 13 lbf.in 3/8” sq male/3 jaw chuck 143 43 660TS3 871-003 3 N.m 30 kgf.cm 26 lbf.in 3/8” sq male/3 jaw chuck 143 43 660TS6 871-005 6 N.m 60 kgf.cm 53 lbf.in 3/8” sq male/3 jaw chuck 143 43 660TS10 871-001 10 N.m 100 kgf.cm 90 lbf.in 3/8” sq male/3 jaw chuck 143 43 660

Supplied as standard with both 3/8” sq male drive & 3/8” opening 3 jaw chuckPart No 432-113 1/2” opening Chuck Assembly for use with ‘TS’ Torque Screwdriver (optional extra)

0 6 31 116

128,

6013

4,90

Ø22

Ø17

,50

Ø7,

50

Ø24

Ø10

,50

0 21,7

5

40,8

5

144,

8515

1,15

Ø22

“Smart” Sensors for use with AFTI display or Advanced Force Gauge (AFG)

Model Part No. Capacity Drive L1 (mm) L2 (mm) L3 (mm) Ø (mm) Max rpmFAST 2 N.m sq 877 - 020 2 N.m 20 kgf.cm 18 lbf.in 1/4” square 70 16 10 40 1000FAST 2 N.m rd 877 - 021 2 N.m 20 kgf.cm 18 lbf.in Ø 9mm round* 70 28 28 40 5000FAST 6 N.m sq 877 - 022 6 N.m 60 kgf.cm 53 lbf.in 1/4” square 70 16 10 40 1000FAST 6 N.m rd 877 - 023 6 N.m 60 kgf.cm 53 lbf.in Ø 9mm round* 70 28 28 40 5000FAST 15 N.m sq 877 - 024 15 N.m 150 kgf.cm 133 lbf.in 1/4” square 70 16 10 40 1000FAST 15 N.m rd 877 - 025 15 N.m 150 kgf.cm 133 lbf.in Ø 9mm round* 70 28 28 40 5000FAST 60 N.m sq 877 - 026 60 N.m 600 kgf.cm 530 lbf.in 3/8” square* 70 24 13 50 1000FAST 60 N.m rd 877 - 027 60 N.m 600 kgf.cm 530 lbf.in Ø 14mm round* 70 28 28 50 5000FAST 150 N.m sq 877 - 028 150 N.m 15.3 kgf.m 111 lbf.ft 1/2” square 70 35 19 50 1000FAST 150 N.m rd 877 - 029 150 N.m 15.3 kgf.m 111 lbf.ft Ø 19mm round* 70 55 55 50 5000

Model Part No. Capacity A Shaft Length (mm) B Shaft Ø (mm)TTR0.05 877 - 030 50 mN.m 500 gf.cm 7 ozf.in 11.2 Ø 3h8TTR0.10 877 - 031 100 mN.m 1000 gf.cm 14 ozf.in 10.4 Ø 5h8TTR0.20 877 - 032 200 mN.m 2000 gf.cm 28 ozf.in 10.4 Ø 5h8TTR0.50 877 - 033 500 mN.m 5 kgf.cm 4.5 lbf.in 17.75 Ø 8h8TTR1 877 - 034 1 N.m 10 kgf.cm 9 lbf.in 17.75 Ø 8h8

Mecmesin

Rotary Torque Transducers - ‘Smart’ (mid & high-torque)A complete range of sensors for measuring rotary torque. Suitable for dynamic torque applications with multiple revolutions (e.g. window-winder mechanism).

Round Drive

L2 L3

L1

Ø

L2 L3

Keyway

Male square drive (Female at

opposite end)

Round Drive

L2 L3

L1

Ø

L2 L3

Keyway

Male square drive (Female at

opposite end)

• Accuracy ±1% of full scale * fitted with keyway

• Maximum axial force is 40 N • Maximum lateral radial force is 50 N

‘FAST’ (mid and high torque) range

Mini Rotary Torque Transducers- ‘Smart’ (low-torque)A complete range of mini sensors for measuring rotary torque below 1 N.m.

Accuracy ±0.5% of full scale TTR0.05 - TTR0.20 TTR0.50 - TTR1

‘Mini’ (low-torque) TTR range

Rotary Torque Sensors

Ø24 -0,020

49 51

8 51

Ø8h8

49 5112 16 17

,75

51BA

Specialised Loadcells

Mecmesin

Specialised Loadcells - ‘Smart’In addition to the standard range of sensors, Mecmesin also offers specialised loadcells dedicated to specific applications. A few examples are shown below. Contact our sales department for further details.

Pinch Sensor Donut Loadcell

Pedal Force Accelerator Hand Gripper

Pedal Force Accelerator in action

Basic Force Gauge

The Basic Force Gauge (BFG) is designed for easy operation and provides outstanding tension and compression measurement performance and reliability at an affordable price.

Supplied as standard with calibration certificate traceable to national standards.

Constructed in a rigid yet lightweight aluminium housing, with its ergonomically attractive shape, the BFG can be used as a hand-held instrument, or alternatively it can be mounted to manual or motorised test stands to allow testing under more controlled conditions.

Mecmesin

Captures peak readings in tension or compression

Internal loadcell stud for quick and easy change of accessories and fixtures. Loadcell stud 10-32 UNF male (5/16 UNC male BFG 1000 N & 2500 N)

RS232, Mitutoyo, Analogue data output for easy data transmission

‘Live’ display mode for applications requiring loads to be continuously monitored

Measurements made in N, kN, mN, lbf, ozf, kgf and gf with a sampling rate of 1000 Hz

Accurate to ±0.25% full-scale

Rugged metal housing ideal for factory or outdoor use

“Live” and “Peak Hold” display with data-output in metal housing

BFG with accessories shown in carry case

All models carry CE marking and are supplied in a robust carrying case with standard accessories and a calibration certificate traceable to UK national standards.

See page 14 for details of accessories supplied.

easy-to-use ergonomic robust• Accuracy ±0.25% of full range• 6 capacities - from 10 N up to 2500 N• Peak capture - in tension and compression• Wide range of grips and fixtures

Key Features

BFG shown mounted to the MDD manual test stand

BFG Specification Table - Capacity & Resolution (e.g. 200 N x 0.05 N)

Mecmesin

Model Part No. mN N kN gf kgf ozf lbfBFG 10 853-410 10000 x 2 10 x 0.002 - 1000 x 0.2 1 x 0.0002 35 x 0.01 2.2 x 0.0005BFG 50 853-411 50000 x 10 50 x 0.01 - 5000 x 1 5 x 0.001 180 x 0.05 11 x 0.002BFG 200 853-412 - 200 x 0.05 - 20000 x 5 20 x 0.005 720 x 0.2 44 x 0.01BFG 500 853-413 - 500 x 0.1 - 50000 x 10 50 x 0.01 1800 x 0.5 110 x 0.02BFG 1000 853-414 - 1000 x 0.2 1 x 0.0002 - 100 x 0.02 3500 x 1 220 x 0.05BFG 2500 853-417 - 2500 x 0.5 2.5 x 0.0005 - 250 x 0.05 9000 x 2 550 x 0.1

• Accuracy ±0.25% of full scale• Full scale deflection of loadcell typically 0.5 mm

• Operating temperature 10°C - 35°C

Compact Force Gauge+

The Compact Force Gauge+ (CFG+) is a pocket-sized, lightweight force gauge designed for elementary tension and compression measurement. Powered by disposable AA batteries, the CFG+ is delivered with a Declaration of Conformity as standard. A Calibration Certificate can be ordered separately.

The CFG+ provides a simple digital alternative to traditional analogue spring balances. It is ideal for users with a limited budget, who only measure on an occasional basis for non-critical applications.

• Accuracy ±0.5% of full scaleNote: The following units are available on the majority of CFG+ models.Those that differ are marked by an asterisk with details given below: kN*, N, mN, kgf, gf**, lbf, ozf * Not available on the CFG+ 50 N** Not available on the CFG+ 200 N or 500 N Hand-held drawer testing

CFG+ Specification Table

Mecmesin

Model Part No. N kgf lbfCFG+ 50 860-021 50 x 0.05 5 x 0.005 11 x 0.01CFG+ 200 860-022 200 x 0.2 20 x 0.02 44 x 0.05CFG+ 500 860-023 500 x 0.5 50 x 0.05 110 x 0.1

Peak readings captured at 500 Hz with an accuracy of ±0.5% of full scale

Measurements made in N, lbf, ozf, kgf and gf with a resolution of 1:1000

Housed in a lightweight plastic case

Loadcell stud 10-32 UNF male

RS232 output for easy data transmission

low cost peak hold portable

“Peak Hold” display in ABS plastic housing

Accessories

Each Mecmesin gauge comes with a set of standard accessories to help perform basic tension or compression tests.

A wide selection of accessories exclusive to Mecmesin are available. See our Accessory Catalogue for an extensive range of grips and fixtures, to enable you to complete thousands of different tests. Alternatively make use of our experienced team of engineers to provide a customised grip to solve your particular problem.

Table of standard accessories delivered with each gauge:

Mecmesin ensures all customers receive a high level of on-going service and support. This includes offering a prompt and cost-effective calibration service. Though calibrations can be completed in our comprehensive in-house facility, customers also have the option of our on-site calibration service.

Service & Calibration

A 6 mm Ø - 5/16 UNC thread (432-122)B 6 mm Ø - 10-32 UNF (F) (432-120)C 3.2 mm Ø - 10-32 UNF (F) (432-118)D 19 mm Ø - 10-32 UNF (F) (432-121)E 19 mm Ø - 5/16 UNC (F) (432-125)

F 30 mm long - 5/16 UNC (F-M) (432-008)G 30 mm - 10-32 UNF (F) to 10-32 UNF (M) (432-006)H 30 mm - 10-32 UNF (F) to M6 (M) (432-007)I Mains adaptor/charger (304-004) - 220V 2-pin round (304-005) - 220V 3-pin square (304-006) - 110V 2-pin flatJ Calibration certificate traceable to national standards * Part numbers shown in brackets

D

C

B

A

I

G

H

F

E

Mecmesin

Model Capacity A B C D E F G H I JAFG 2.5, 5, 10, 25, 50 N • • • • • •AFG 100, 250, 500 N • • • • • •AFG 1000, 2500 N • • • • •

BFG 10, 50 N • • • • • •BFG 200, 500 N • • • • • •BFG 1000, 2500 N • • • • •

CFG+ 50 N • • • •CFG+ 200 N • • • •CFG+ 500 N • • • •

J

Mecmesin - a world leader in affordable force and torque testing solutionsSince 1977, Mecmesin has assisted thousands of companies achieve enhanced quality control in design and production.

The Mecmesin brand represents excellence in accuracy, build, service, and value. In production centres and research labs worldwide, designers, engineers, operators, and quality managers endorse Mecmesin force and torque testing

systems for their high performance across countless applications.

www.mecmesin.com

The Mecmesin global distribution network guarantees your testing solution is rapidly delivered and efficiently serviced, wherever you are

brochure ref: 431-126-16

DISTRIBUTOR STAMP

AlgeriaArgentinaAustralia

AustriaBangladesh

BelgiumBrazil

BulgariaCambodia

CanadaChile

ChinaColombia

Costa RicaCroatia

Czech RepublicDenmarkEcuador

EgyptEstoniaFinlandFrance

GermanyGreece

HungaryIndia

IndonesiaIran

IrelandIsraelItaly

JapanKorea

KosovoLaos

LatviaLebanonLithuania

MacedoniaMalaysia

MexicoMoroccoMyanmar

NetherlandsNew Zealand

NorwayParaguay

Peru

PhilippinesPoland

PortugalRomania

RussiaSaudi Arabia

SerbiaSingapore

SlovakiaSlovenia

South AfricaSpain

Sri LankaSweden

SwitzerlandSyria

TaiwanThailand

TunisiaTurkey

UKUruguay

USAVietnam

France Mecmesin France w: www.mecmesin.fre: contact@mecmesin.fr

Head Office Mecmesin Limited w: www.mecmesin.come: sales@mecmesin.com

Germany Mecmesin GmbH w: www.mecmesin.dee: info@mecmesin.de

China Mecmesin (Shanghai) Pte Ltd

w: www.mecmesin.cne: sales@mecmesin.cn

North America Mecmesin Corporation

w: www.mecmesincorp.come: info@mecmesincorp.com

Asia Mecmesin Asia Co. Ltd

w: www.mecmesinasia.come: sales@mecmesinasia.com

Mecmesin reserves the right to alter equipment specifications without

prior notice. E&OE

t e s t i n g t o p e r f e c t i o n