Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 1 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
SUMMARY OF TEST RESULTS
TEST REQUESTED CONCLUSION REMARKEuropean Council Directive 2011/65/EU on the Restriction ofthe Use of Certain Hazardous Substances in Electrical andElectronic Equipment (RoHS)
PASS -
Phthalates Content – European Council Directive 2011/65/EUon the Restriction of the Use of Certain Hazardous Substancesin Electrical and Electronic Equipment (RoHS) with itsAmendments up to EU No. 2015/ 863 Annex II
PASS -
GUANGDONG ESTTECHNOLOGY CO., LTD.
Spark ZhangManager, Chemical Department
RT/ZHREMARKIf there are questions or concerns on this report, please contact the following persons:Report Enquiry: (86) 83081888 Ext. 618 E-mail: [email protected]
Business Contact: (86) 83081888
APPLICANT : KONKA GROUP CO., LTD.15-24F, Konka R&D Building, No.28 Keji South 12th Road,Science and Techmology Park, Yuehai Subdistrict, NanshanDistrict, Shenzhen, Guangdong, China
DATE OF SUBMISSION : 11 Apr 2019
TEST PERIOD : 11 Apr 2019 to 7 May 2019
SAMPLE DESCRIPTION : LED TV
Model No. : UDL49MK662ANTS, HY-TVS49UH-002,LED A49UHD0819BS
Buyer: /
Trade name : KONKA, HYUNDAI, Aya
Manufacturer : /
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 2 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
1. Material List
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
001 Black plastic Cover, LED TV -
002 White printed black plastic button label, LED TV -
003 White printed black plastic Label, LED TV -
004 Coppery metal Nut, cover, LED TV -
005 Black plastic Frame, LED TV -
006 Gray soft plastic withadhesive
Adhesive tape, frame, LEDTV -
007 Black plastic Screen frame, LED TV -
008 Black soft plastic withadhesive
Adhesive tape, screenframe, LED TV -
009 Gray soft plastic Adhesive tape, screenframe , LED TV -
010 Black plastic Holder, PCB, LED TV -
011 Gray metal Holder, LED TV -
012 Silvery metal Holder, LED TV -
013 Black plastic Holder, LED TV -
014 Black plastic Foot, LED TV -
015 Black soft plastic Pads, foot, LED TV -
016 Black coated silvery metal Screw, LED TV -
017 Silvery metal Screw, LED TV -
018 Black coated silvery metal Back, LED TV -
019 Black plastic Insulation board -
020 Gray plastic Fixed, back, LED TV -
021 Beige plastic Fixed, back, LED TV -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 3 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
022 Gray soft plastic withadhesive Patch, back, LED TV -
023 Bright black plastic withadhesive Adhesive tape -
024 Transparent plastic Fixed, back, LED TV -
025 Transparent plastic Screen protection board -
026 Camouflage plastic Screen protection board -
027 Translucent plastic Screen protection board -
028 Translucent plastic Screen protection board -
029 White plastic Screen protection board -
030 Yellow/white plastic Lamp bead, LED, back,LED TV -
031 White printed silvery metal PCB, back, LED TV -
032 Transparent plastic LED, back, LED TV -
033 Black soft plastic Pad, back, LED TV -
034 White plastic Connector, back, LED TV -
035 Rice white plastic Connector, back, LED TV -
036 Beige plastic Connector, LED wire, LEDTV -
037 Red plastic Wire jacket -
038 White plastic Wire jacket -
039 Transparent gray body Screen board -
040 Green/coppery plastic Connector, screen, board,LED TV -
041 Black plastic Patch, connector, screenboard -
042 Beige plastic Connector, PCB -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 4 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
043 Black plastic Holder, connector, PCB -
044 Silvery metal Horn, connector, PCB -
045 Blue printed white plastic Information belt -
046 Black plastic with adhesive Adhesive tape -
047 Black body SMD IC -
048 Brown body SMD capacitor -
049 Gray body SMD inductance -
050 White printed green plastic PCB -
051 Black plastic Box, speaker, LED TV -
052 Black soft plastic Ring, box, speaker, LEDTV -
053 Black plastic with adhesive Adhesive tape, box,speaker, LED TV -
054 Black plastic Ring, speaker, LED TV -
055 Black paper Paper plate -
056 Black paper Dust cap -
057 White paper card Speaker -
058 Coppery metal Wire -
059 Silvery solder Solder on paper card -
060 Silvery metal Contact plate -
061 Black metal Magnet -
062 Silvery metal Core of speaker -
063 Black glue Glue -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 5 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
064 Red plastic Wire jacket -
065 Red printed black plastic Wire jacket -
066 Black plastic Line converter -
067 White plastic Wire jacket -
068 White printed black plastic Wire jacket -
069 Blue plastic Wire jacket -
070 Blue printed black plastic Wire jacket -
071 Silvery metal Wire -
072 White plastic Connector -
073 Silvery metal Horn ,connector, speaker -
074 Black plastic Holder, AC adapter -
075 Black plastic Case, AC adapter -
076 Silvery metal AC plug -
077 Silvery metal Contact plate -
078 Transparent plastic Wire sleeve -
079 Red plastic Wire jacket -
080 Black plastic Wire jacket -
081 Silvery metal Wire -
082 White plastic Connector -
083 Silvery metal Horn, connector -
084 Black plastic Wire sleeve -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 6 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
085 Transparent plastic LED cover -
086 White plastic Connector -
087 Beige plastic Connector -
088 Silvery metal Horn, connector -
089 Gray plastic Wire jacket -
090 Pink plastic Wire jacket -
091 Silvery metal Wire -
092 Black plastic LED -
093 Transparent plastic LED -
094 Silvery metal Horn, LED, PCB, LED TV -
095 White printed green plastic PCB -
096 Black plastic Button frame, PCB, LEDTV -
097 Black plastic Button, PCB, LED TV -
098 Black plastic Holder, button, PCB, LEDTV -
099 Gray plastic Holder, button, PCB, LEDTV -
100 Silvery metal Horn, button, PCB, LEDTV -
101 Silvery metal Case, button, PCB, LEDTV -
102 Dark red plastic Wire jacket -
103 Dark gray plastic Wire jacket -
104 Silvery metal Wire -
105 White printed green plastic PCB -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 7 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
106 Silvery metal Contact plate -
107 Beige plastic Connector -
108 Silvery metal Cover, PCB -
109 Gray soft plastic Cable jacket -
110 Black plastic Wire jacket -
111 Yellow plastic Wire jacket -
112 White plastic Wire jacket -
113 Green plastic Wire jacket -
114 Red plastic Wire jacket -
115 Black plastic Wire sleeve(small) -
116 Black plastic Wire sleeve(big) -
117 Silvery metal Wire -
118 White printed green plastic PCB -
119 White plastic Connector -
120 Silvery metal Horn, connector -
121 Blue plastic Wire jacket -
122 Black plastic Wire jacket -
123 Silvery metal Wire -
124 Silvery metal Case, USB, PCB -
125 Black plastic Holder, USB, PCB -
126 Silvery metal Horn, USB, PCB -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 8 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
127 Silvery metal Case, soundtrack, PCB -
128 White plastic Ring, soundtrack, PCB -
129 Red plastic Ring, soundtrack, PCB -
130 Blue plastic Ring, soundtrack, PCB -
131 Green plastic Ring, soundtrack, PCB -
132 Black plastic Holder, soundtrack, PCB -
133 Black plastic Case, XSU06, PCB -
134 Silvery metal Horn, XSU06, PCB -
135 Black plastic Case, headset, PCB -
136 Silvery metal Contact plate -
137 Silvery metal Box, XS102, PCB -
138 Silvery metal Head, XS102, PCB -
139 Black plastic Holder, XS102, PCB -
140 Silvery metal Horn, XS102, PCB -
141 Silvery metal Case, XS103, PCB -
142 Black plastic Holder, XS103, PCB -
143 Silvery metal Horn, XS103, PCB -
144 Silvery metal Case, VGA, PCB -
145 Silvery metal Screw, VGA, PCB -
146 Silvery metal Case, HDMI, PCB -
147 Black plastic Holder, HDMI, PCB -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 9 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
148 Silvery metal Horn, HDMI, PCB -
149 Silvery metal Case, XS610, PCB -
150 Black plastic Holder, XS610, PCB -
151 Coppery metal Horn, XS610, PCB -
152 Black plastic Box, XS620, PCB -
153 Silvery metal Case, XS620, PCB -
154 Black plastic PPT sleeve, PCB -
155 Beige plastic Connector, PCB -
156 Ricer white plastic Connector, PCB -
157 White printed black plastic Electrolytic capacitorsleeve -
158 Silvery metal Electrolytic capacitor shell -
159 Black soft plastic Rubber seal -
160 Grey metal Aluminum foil -
161 Silvery metal Aluminum foil -
162 Brown paper Electrolytic paper -
163 Silvery metal Pin of electrolytic capacitor -
164 black plastic Connector, PCB -
165 Silvery metal Horn, connector, PCB -
166 Silvery metal Crystal -
167 White plastic Fixed, PCB -
168 Black body SMD IC -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 10 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
169 Black body SMD resistor -
170 Gray body Inductance -
171 Black body SMD diode -
172 Brown body SMD capacitor -
173 Silvery solder Solder, PCB -
174 White printed green plastic PCB, LED TV -
175 White printed black plastic Electrolytic capacitorsleeve -
176 Silvery metal Electrolytic capacitor shell -
177 Black soft plastic Rubber seal -
178 Grey metal Aluminum foil -
179 Silvery metal Aluminum foil -
180 Brown paper Electrolytic paper -
181 Silvery metal Pin of electrolytic capacitor -
182 Black printed yellow plastic Electrolytic capacitorsleeve -
183 Beige plastic Connector -
184 Yellow plastic withadhesive
Adhesive tape oftransformer -
185 Black plastic Frame of transformer -
186 Transparent plastic Wire jacket -
187 Coppery metal Wire -
188 Black metal Magnet -
189 Coppery metal Coil of transformer -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 11 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
190 Black plastic Holder, inductance -
191 Green core Core of inductance -
192 Black core Core of inductance -
193 Coppery metal Coil of inductance -
194 Yellow plastic Capacitor sleeve -
195 Silvery/black plastic Filler, capacitor -
196 Gray plastic Capacitor sleeve -
197 Beige plastic Housing, PCB -
198 Green body Resistor -
199 Pink body Resistor -
200 Blue body Capacitor -
201 Transparent body Glass diode -
202 Dark red body VDF902 -
203 Silvery/black body Diode -
204 Red plastic Fuse sleeve -
205 Black plastic Holder, fuse, PCB -
206 Silvery metal Horn, fuse, PCB -
207 White glue Glue -
208 Black body SMD IC -
209 Black body SMD resistor -
210 Black body SMD diode -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 12 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
211 Brown body SMD capacitor -
212 White body Cement resistance -
213 Black coated silvery metal Heat sink -
214 Silvery metal Jump wire -
215 Silvery solder Solder, PCB -
216 Yellow printed greenplastic PCB, LED TV -
217 Black plastic Case, AC plug -
218 Black plastic Holder, AC plug -
219 Silvery metal AC plug -
220 Black soft plastic Cable jacket -
221 Blue plastic Wire jacket -
222 Brown plastic Wire jacket -
223 Coppery metal Wire -
224 Black plastic Case, AC out plug -
225 Black plastic Holder, AC out plug -
226 Coppery metal Contact plate -
227 White printed black plastic Cover, remote control -
228 Black plastic Base, remote control -
229 Silvery metal Spring -
230 White printed gray softplastic Remote control button -
231 Red soft plastic Remote control button -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 13 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
TestItem(s) Sample Photo Item / Component
Description(s) Location(s) Style(s)
232 Green soft plastic Remote control button -
233 Yellow soft plastic Remote control button -
234 Blue soft plastic Remote control button -
235 White/red soft plastic Remote control button -
236 Black plastic Battery cover -
237 Transparent plastic LED, PCB -
238 Silvery metal Horn, LED, PCB -
239 White printed black plastic Electrolytic capacitorsleeve -
240 Silvery metal Electrolytic capacitor shell -
241 Black soft plastic Rubber seal -
242 Grey metal Aluminum foil -
243 Silvery metal Aluminum foil -
244 Brown paper Electrolytic paper -
245 Silvery metal Pin of electrolytic capacitor -
246 Transparent plastic withadhesive Adhesive tape -
247 Silvery metal Button patch -
248 Black body SMD IC -
249 Silvery solder Solder, PCB, LED TV -
250 Brown/green plastic PCB, LED TV -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 14 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
2. Test Result2.1: XRF Screening test resultsTest Method: Cadmium, Lead, Mercury, Chromium, Bromine
-With reference to IEC 62321-3-1: 2013 -XRF Screening ProcedureInstrument: Energy dispersive X-ray fluorescence spectrometer
Material No.
ppm[mg/kg]Pb Cd Hg Cr Br
Limit (mg/kg)
1000 100 1000 CrⅥ:1000 PBB: 1000PBDE: 1000
001 ND ND ND ND D(*1)002 ND ND ND ND ND003 ND ND ND ND ND004 D(*2) ND ND ND NA005 ND ND ND ND ND006 ND ND ND ND ND007 ND ND ND ND D(*1)008 ND ND ND ND ND009 ND ND ND ND ND010 ND ND ND ND D(*1)011 ND ND ND D(*3) NA012 ND ND ND D(*3) NA013 ND ND ND ND ND014 ND ND ND ND D(*1)015 ND ND ND ND ND016 ND ND ND D(*3) NA017 ND ND ND D(*3) NA018 ND ND ND ND NA019 ND ND ND ND D(*1)020 ND ND ND ND ND021 ND ND ND ND ND022 ND ND ND ND ND023 ND ND ND ND ND024 ND ND ND ND ND025 ND ND ND ND ND026 ND ND ND ND ND027 ND ND ND ND ND028 ND ND ND ND ND029 ND ND ND ND ND030 ND ND ND ND ND031 ND ND ND ND NA032 ND ND ND ND ND033 ND ND ND ND ND034 ND ND ND ND ND
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 15 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
035 ND ND ND ND ND036 ND ND ND ND ND037 ND ND ND ND ND038 ND ND ND ND ND039 ND ND ND ND ND040 ND ND ND ND ND041 ND ND ND ND ND042 ND ND ND ND ND043 ND ND ND ND ND044 ND ND ND ND NA045 ND ND ND ND D(*1)046 ND ND ND ND ND047 ND ND ND ND ND048 ND ND ND ND ND049 ND ND ND ND ND050 ND ND ND ND ND051 ND ND ND ND D(*1)052 ND ND ND ND ND053 ND ND ND ND ND054 ND ND ND ND ND055 ND ND ND ND ND056 ND ND ND ND ND057 ND ND ND ND ND058 ND ND ND ND NA059 ND ND ND ND ND060 ND ND ND ND NA061 ND ND ND ND NA062 ND ND ND ND NA063 ND ND ND ND ND064 ND ND ND ND ND065 ND ND ND ND ND066 ND ND ND ND ND067 ND ND ND ND ND068 ND ND ND ND ND069 ND ND ND ND ND070 ND ND ND ND ND071 ND ND ND ND NA072 ND ND ND ND ND073 ND ND ND ND NA074 ND ND ND ND ND075 ND ND ND ND ND076 ND ND ND ND NA077 ND ND ND ND NA078 ND ND ND ND ND079 ND ND ND ND ND080 ND ND ND ND ND
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 16 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
081 ND ND ND ND ND082 ND ND ND ND ND083 ND ND ND ND NA084 ND ND ND ND ND085 ND ND ND ND ND086 ND ND ND ND ND087 ND ND ND ND ND088 ND ND ND ND NA089 ND ND ND ND ND090 ND ND ND ND ND091 ND ND ND ND NA092 ND ND ND ND ND093 ND ND ND ND ND094 ND ND ND ND NA095 ND ND ND ND D(*1)096 ND ND ND ND ND097 ND ND ND ND ND098 ND ND ND ND ND099 ND ND ND ND ND100 ND ND ND D(*3) NA101 ND ND ND ND NA102 ND ND ND ND ND103 ND ND ND ND ND104 ND ND ND ND NA105 ND ND ND ND D(*1)106 ND ND ND ND NA107 ND ND ND ND D(*1)108 ND ND ND ND NA109 ND ND ND ND ND110 ND ND ND ND ND111 ND ND ND ND ND112 ND ND ND ND ND113 ND ND ND ND ND114 ND ND ND ND ND115 ND ND ND ND ND116 ND ND ND ND ND117 ND ND ND ND NA118 ND ND ND ND D(*1)119 ND ND ND ND ND120 ND ND ND ND NA121 ND ND ND ND ND122 ND ND ND ND ND123 ND ND ND ND NA124 ND ND ND D(*3) NA125 ND ND ND ND D(*1)126 ND ND ND ND NA
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 17 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
127 ND ND ND ND NA128 ND ND ND ND D(*1)129 ND ND ND ND D(*1)130 ND ND ND ND D(*1)131 ND ND ND ND D(*1)132 ND ND ND ND D(*1)133 ND ND ND ND D(*1)134 ND ND ND ND NA135 ND ND ND ND D(*1)136 ND ND ND ND NA137 ND ND ND ND NA138 ND ND ND D(*3) NA139 ND ND ND ND ND140 ND ND ND ND NA141 ND ND ND D(*3) NA142 ND ND ND ND ND143 ND ND ND ND NA144 ND ND ND ND NA145 ND ND ND ND NA146 ND ND ND ND NA147 ND ND ND ND ND148 ND ND ND ND NA149 ND ND ND ND NA150 ND ND ND ND ND151 ND ND ND ND NA152 ND ND ND ND D(*1)153 ND ND ND ND NA154 ND ND ND ND ND155 ND ND ND ND D(*1)156 ND ND ND ND ND157 ND ND ND ND ND158 ND ND ND ND NA159 ND ND ND ND ND160 ND ND ND ND NA161 ND ND ND ND NA162 ND ND ND ND ND163 ND ND ND ND NA164 ND ND ND ND D(*1)165 ND ND ND ND NA166 ND ND ND ND NA167 ND ND ND ND ND168 ND ND ND ND ND169 ND ND ND ND ND170 ND ND ND ND ND171 ND ND ND ND ND172 ND ND ND ND ND
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 18 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
173 ND ND ND ND NA174 ND ND ND ND D(*1)175 ND ND ND ND ND176 ND ND ND ND NA177 ND ND ND ND ND178 ND ND ND ND NA179 ND ND ND ND NA180 ND ND ND ND ND181 ND ND ND ND NA182 ND ND ND ND ND183 ND ND ND ND D(*1)184 ND ND ND ND ND185 ND ND ND ND ND186 ND ND ND ND ND187 ND ND ND ND NA188 ND ND ND ND NA189 ND ND ND ND NA190 ND ND ND ND ND191 ND ND ND ND ND192 ND ND ND ND ND193 ND ND ND ND NA194 ND ND ND ND D(*1)195 ND ND ND ND ND196 ND ND ND ND D(*1)197 ND ND ND ND D(*1)198 ND ND ND ND ND199 ND ND ND ND ND200 ND ND ND ND ND201 ND ND ND ND ND202 ND ND ND ND ND203 ND ND ND ND ND204 ND ND ND ND ND205 ND ND ND ND ND206 ND ND ND ND NA207 ND ND ND ND ND208 ND ND ND ND ND209 ND ND ND ND ND210 ND ND ND ND ND211 ND ND ND ND ND212 ND ND ND ND ND213 ND ND ND ND NA214 ND ND ND ND NA215 ND ND ND ND NA216 ND ND ND ND D(*1)217 ND ND ND ND ND218 ND ND ND ND D(*1)
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 19 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
219 D(*2) ND ND ND NA220 ND ND ND ND ND221 ND ND ND ND ND222 ND ND ND ND ND223 ND ND ND ND NA224 ND ND ND ND ND225 ND ND ND ND D(*1)226 ND ND ND ND NA227 ND ND ND ND ND228 ND ND ND ND D(*1)229 ND ND ND ND NA230 ND ND ND ND ND231 ND ND ND ND ND232 ND ND ND ND ND233 ND ND ND ND ND234 ND ND ND ND ND235 ND ND ND ND ND236 ND ND ND ND D(*1)237 ND ND ND ND D(*1)238 ND ND ND ND NA239 ND ND ND ND ND240 ND ND ND ND NA241 ND ND ND ND ND242 ND ND ND ND NA243 ND ND ND ND NA244 ND ND ND ND ND245 ND ND ND ND NA246 ND ND ND ND ND247 ND ND ND D(*3) NA248 ND ND ND ND ND249 ND ND ND ND NA250 ND ND ND ND ND
Remark:-mg/kg is equal to ppm (parts per million)(*1) The screening result was found in the inconclusive region, thus the further wet chemistry tests aresuggested.(*2) The screening result was found above the limit, thus the further wet chemistry tests are suggested.(*3) The chromium screening result was found in the inconclusive region, thus the further wet chemistrytests are suggested.
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 20 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
Guidelines: XRF Screening limits for different matrices
MaterialsConcentration (ppm)
Cd Cr Pb Hg Br
Metallic BL≤70<X≤130<OL BL≤700<OL BL≤700<
X≤1300<OLBL≤700<
X≤1300<OL NA
Polymeric BL≤70<X≤130<OL BL≤700<OL BL≤700<
X≤1300<OLBL≤700<
X≤1300<OL BL≤200<X
ElectronicCompone
ntsDL<X≤150<OL BL≤500<OL BL≤700<
X≤1300<OLBL≤500<
X≤1500<OL BL≤200<X
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 21 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
2.2: Confirmation Test ResultsTest Methods: for total Lead, Cadmium, Mercury
-Ref. to IEC 62321-4: 2013 & IEC 62321-5: 2013, analysis was performed by ICP-AES or AAS.For Hexavalent Chromium
-Ref. to IEC 62321-7-1: 2015, nalysis was performed by Spot-test and water-boiling procedure.(Metal)-Ref. to IEC 62321-7-2: 2017, analysis was performed by UV/VIS(Polymeric and electronics).-Ref. to International Standard ISO 17075: 2007(Leather and other materials).
For PBBs, PBDEs-Ref. to IEC 62321-6: 2015, analysis was performed by GC-MS.
Pb Cd Hg Cr(Ⅵ) PBBs PBDEs
Limitppm(mg/kg)
1000 100 1000 1000 1000 1000
MaterialNo.
ppm(mg/kg)Pb Cd Hg Cr(Ⅵ) PBBs PBDEs
001 - - - - ND ND004 37000(*1) - - - - -007 - - - - ND ND010 - - - - ND ND011 - - - Negative - -012 - - - Negative - -014 - - - - ND ND016 - - - Negative - -017 - - - Negative - -019 - - - - ND ND045 - - - - ND ND051 - - - - ND ND095 - - - - ND ND100 - - - Negative - -105 - - - - ND ND107 - - - - ND ND118 - - - - ND ND124 - - - Negative - -125 - - - - ND ND128 - - - - ND ND129 - - - - ND ND130 - - - - ND ND131 - - - - ND ND132 - - - - ND ND133 - - - - ND ND135 - - - - ND ND138 - - - Negative - -141 - - - Negative - -
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 22 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
152 - - - - ND ND155 - - - - ND ND164 - - - - ND ND174 - - - - ND ND183 - - - - ND ND194 - - - - ND ND196 - - - - ND ND197 - - - - ND ND216 - - - - ND ND218 - - - - ND ND219 12000(*1) - - - - -225 - - - - ND ND228 - - - - ND ND236 - - - - ND ND237 - - - - ND ND247 - - - Negative - -
Remark:(*1) According to Annex of 2011/65/EU, Lead as an alloying element in copper alloy containing up to 4 %lead by weight should be exempted.
Note / Key:ND = Not Detected “D” = detected “BL” = below Limit“X” = Inconclusive Range “DL” = Detection Limit “OL” = over LimitNA = Not Applicable 10000 mg/kg = 1 %mg/kg = milligram(s) per kilogram = ppm = part(s) per millionDetection Limit : See Appendix.
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 23 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
2.3: Detection Limit
List of Analytes Detection Limit and Maximum Allowable Limit [ Compliance Test for European Council Directive2011/65/EU ] :
No. Name of Analytes
Detection Limit (mg/kg)
MaximumAllowable Limit
(mg/kg)
X-ray fluorescence (XRF)[a]
WetChemistryPlastic
Metallic /glass /ceramic
Others
1 Lead (Pb) 100 200 200 10 10002 Cadmium (Cd) 50 50 50 10 1003 Mercury (Hg) 100 200 200 10 10004 Chromium (Cr) 100 200 200 NA NA5 Chromium VI (Cr VI) NA NA NA 10 /See [a, b] 1000 / Negative[b]
6 Bromine (Br) 200 NA 200 NA NA
7
Polybromobiphenyls (PBBs)- Bromobiphenyl (MonoBB)- Dibromobiphenyl (DiBB)- Tribromobiphenyl (TriBB)- Tetrabromobiphenyl (TetraBB)- Pentabromobiphenyl (PentaBB)- Hexabromobiphenyl (HexaBB)- Heptabromobiphenyl (HeptaBB)- Octabromobiphenyl (OctaBB)- Nonabromobiphenyl (NonaBB)- Decabromobiphenyl (DecaBB)
NA NA NA Each 50 Sum 1000
8
Polybromodiphenyl ethers (PBDEs)- Bromodiphenyl ether (MonoBDE)- Dibromodiphenyl ether (DiBDE)- Tribromodiphenyl ether (TriBDE)- Tetrabromodiphenyl ether (TetraBDE)- Pentabromodiphenyl ether (PentaBDE)- Hexabromodiphenyl ether (HexaBDE)- Heptabromodiphenyl ether (HeptaBDE)- Octabromodiphenyl ether (OctaBDE)- Nonabromodiphenyl ether (NonaBDE)- Decabromodiphenyl ether (DecaBDE)
NA NA NA Each 50 Sum 1000
[a]The principle of this method was evaluated and supported by two studies organized by IEC TC 111 WG3. These studieswere focused on detecting the presence of Cr VI in the corrosion protection coatings on metallic samples.
[b]
Result(s) of Cr VI for metallic material(s) was (were) expressed in term of positive and negative. Negative means theabsence of Cr VI on the tested areas and the result(s) was (were) regarded as in compliance with European Parliament andCouncil Directive 2011/65/EU, Article 4(1). While, positive means the presence of Cr VI on tested areas and the result(s)was (were) regarded as in conflict with European Parliament and Council Directive 2011/65/EU, Article 4(1).
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 24 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
BBP/DBP/DEHP/DIBP Content – European Council Directive 2011/65/EU on the Restriction of theUse of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) with itsAmendments up to EU No. 2015/ 863 Annex II
Test Methods:With reference to International Standard IEC 62321-8, Sample was extracted with organic solvent and thenanalyzed by Gas Chromatograph Mass Spectrometer.
Test Item(s) Item / Component Description(s) Location(s) Style(s)
001 Black plastic Cover, LED TV -
002 White printed black plastic button label, LED TV -
003 White printed black plastic Label, LED TV -
005 Black plastic Frame, LED TV -
006 Gray soft plastic with adhesive Adhesive tape, frame, LEDTV -
007 Black plastic Screen frame, LED TV -
008 Black soft plastic with adhesive Adhesive tape, screenframe, LED TV -
009 Gray soft plastic Adhesive tape, screenframe , LED TV -
010 Black plastic Holder, PCB, LED TV -
013 Black plastic Holder, LED TV -
014 Black plastic Foot, LED TV -
015 Black soft plastic Pads, foot, LED TV -
019 Black plastic Insulation board -
020 Gray plastic Fixed, back, LED TV -
021 Beige plastic Fixed, back, LED TV -
022 Gray soft plastic with adhesive Patch, back, LED TV -
023 Bright black plastic with adhesive Adhesive tape -
024 Transparent plastic Fixed, back, LED TV -
025 Transparent plastic Screen protection board -
026 Camouflage plastic Screen protection board -
027 Translucent plastic Screen protection board
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 25 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
028 Translucent plastic Screen protection board
029 White plastic Screen protection board
030 Yellow/white plastic Lamp bead, LED, back,LED TV
032 Transparent plastic LED, back, LED TV
033 Black soft plastic Pad, back, LED TV
034 White plastic Connector, back, LED TV
035 Rice white plastic Connector, back, LED TV
036 Beige plastic Connector, LED wire, LEDTV
037 Red plastic Wire jacket
038 White plastic Wire jacket
040 Green/coppery plastic Connector, screen, board,LED TV
041 Black plastic Patch, connector, screenboard
042 Beige plastic Connector, PCB
043 Black plastic Holder, connector, PCB
045 Blue printed white plastic Information belt
046 Black plastic with adhesive Adhesive tape
050 White printed green plastic PCB
051 Black plastic Box, speaker, LED TV
052 Black soft plastic Ring, box, speaker, LEDTV
053 Black plastic with adhesive Adhesive tape, box,speaker, LED TV
054 Black plastic Ring, speaker, LED TV
063 Black glue Glue
064 Red plastic Wire jacket
065 Red printed black plastic Wire jacket
066 Black plastic Line converter
067 White plastic Wire jacket
068 White printed black plastic Wire jacket
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 26 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
069 Blue plastic Wire jacket
070 Blue printed black plastic Wire jacket
072 White plastic Connector
074 Black plastic Holder, AC adapter
075 Black plastic Case, AC adapter
078 Transparent plastic Wire sleeve
079 Red plastic Wire jacket
080 Black plastic Wire jacket
082 White plastic Connector
084 Black plastic Wire sleeve
085 Transparent plastic LED cover
086 White plastic Connector
087 Beige plastic Connector
089 Gray plastic Wire jacket
090 Pink plastic Wire jacket
092 Black plastic LED
093 Transparent plastic LED
095 White printed green plastic PCB
096 Black plastic Button frame, PCB, LEDTV
097 Black plastic Button, PCB, LED TV
098 Black plastic Holder, button, PCB, LEDTV
099 Gray plastic Holder, button, PCB, LEDTV
102 Dark red plastic Wire jacket
103 Dark gray plastic Wire jacket
105 White printed green plastic PCB
107 Beige plastic Connector
109 Gray soft plastic Cable jacket
110 Black plastic Wire jacket
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 27 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
111 Yellow plastic Wire jacket
112 White plastic Wire jacket
113 Green plastic Wire jacket
114 Red plastic Wire jacket
115 Black plastic Wire sleeve(small)
116 Black plastic Wire sleeve(big)
118 White printed green plastic PCB
119 White plastic Connector
121 Blue plastic Wire jacket
122 Black plastic Wire jacket
125 Black plastic Holder, USB, PCB
128 White plastic Ring, soundtrack, PCB
129 Red plastic Ring, soundtrack, PCB
130 Blue plastic Ring, soundtrack, PCB
131 Green plastic Ring, soundtrack, PCB
132 Black plastic Holder, soundtrack, PCB
133 Black plastic Case, XSU06, PCB
135 Black plastic Case, headset, PCB
139 Black plastic Holder, XS102, PCB
142 Black plastic Holder, XS103, PCB
147 Black plastic Holder, HDMI, PCB
150 Black plastic Holder, XS610, PCB
152 Black plastic Box, XS620, PCB
154 Black plastic PPT sleeve, PCB
155 Beige plastic Connector, PCB
156 Ricer white plastic Connector, PCB
157 White printed black plastic Electrolytic capacitor sleeve
159 Black soft plastic Rubber seal
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 28 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
164 black plastic Connector, PCB
167 White plastic Fixed, PCB
174 White printed green plastic PCB, LED TV
175 White printed black plastic Electrolytic capacitor sleeve
177 Black soft plastic Rubber seal
182 Black printed yellow plastic Electrolytic capacitor sleeve
183 Beige plastic Connector
184 Yellow plastic with adhesive Adhesive tape oftransformer
185 Black plastic Frame of transformer
186 Transparent plastic Wire jacket
190 Black plastic Holder, inductance
194 Yellow plastic Capacitor sleeve
195 Silvery/black plastic Filler, capacitor
196 Gray plastic Capacitor sleeve
197 Beige plastic Housing, PCB
204 Red plastic Fuse sleeve
205 Black plastic Holder, fuse, PCB
207 White glue Glue
216 Yellow printed green plastic PCB, LED TV
217 Black plastic Case, AC plug
218 Black plastic Holder, AC plug
220 Black soft plastic Cable jacket
221 Blue plastic Wire jacket
222 Brown plastic Wire jacket
224 Black plastic Case, AC out plug
225 Black plastic Holder, AC out plug
227 White printed black plastic Cover, remote control
228 Black plastic Base, remote control
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 29 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
230 White printed gray soft plastic Remote control button
231 Red soft plastic Remote control button
232 Green soft plastic Remote control button
233 Yellow soft plastic Remote control button
234 Blue soft plastic Remote control button
235 White/red soft plastic Remote control button
236 Black plastic Battery cover
237 Transparent plastic LED, PCB
239 White printed black plastic Electrolytic capacitor sleeve
241 Black soft plastic Rubber seal
246 Transparent plastic with adhesive Adhesive tape
250 Brown/green plastic PCB, LED TV
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 30 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
Test Parameter: BBP DBP DEHP DiBP -
Limit (%): 0.1 0.1 0.1 0.1 -
Test Item(s) Result (%) Conclusion
001 ND ND ND ND PASS
002 ND ND ND ND PASS
003 ND ND ND ND PASS
005 ND ND ND ND PASS
006 ND ND ND ND PASS
007 ND ND ND ND PASS
008 ND ND ND ND PASS
009 ND ND ND ND PASS
010 ND ND ND ND PASS
013 ND ND ND ND PASS
014 ND ND ND ND PASS
015 ND ND ND ND PASS
019 ND ND ND ND PASS
020 ND ND ND ND PASS
021 ND ND ND ND PASS
022 ND ND ND ND PASS
023 ND ND ND ND PASS
024 ND ND ND ND PASS
025 ND ND ND ND PASS
026 ND ND ND ND PASS
027 ND ND ND ND PASS
028 ND ND ND ND PASS
029 ND ND ND ND PASS
030 ND ND ND ND PASS
032 ND ND ND ND PASS
033 ND ND ND ND PASS
034 ND ND ND ND PASS
035 ND ND ND ND PASS
036 ND ND ND ND PASS
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 31 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
Test Parameter: BBP DBP DEHP DiBP -
Limit (%): 0.1 0.1 0.1 0.1 -
Test Item(s) Result (%) Conclusion
037 ND ND ND ND PASS
038 ND ND ND ND PASS
040 ND ND ND ND PASS
041 ND ND ND ND PASS
042 ND ND ND ND PASS
043 ND ND ND ND PASS
045 ND ND ND ND PASS
046 ND ND ND ND PASS
050 ND ND ND ND PASS
051 ND ND ND ND PASS
052 ND ND ND ND PASS
053 ND ND ND ND PASS
054 ND ND ND ND PASS
063 ND ND ND ND PASS
064 ND ND ND ND PASS
065 ND ND ND ND PASS
066 ND ND ND ND PASS
067 ND ND ND ND PASS
068 ND ND ND ND PASS
069 ND ND ND ND PASS
070 ND ND ND ND PASS
072 ND ND ND ND PASS
074 ND ND ND ND PASS
075 ND ND ND ND PASS
078 ND ND ND ND PASS
079 ND ND ND ND PASS
080 ND ND ND ND PASS
082 ND ND ND ND PASS
084 ND ND ND ND PASS
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 32 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
Test Parameter: BBP DBP DEHP DiBP -
Limit (%): 0.1 0.1 0.1 0.1 -
Test Item(s) Result (%) Conclusion
085 ND ND ND ND PASS
086 ND ND ND ND PASS
087 ND ND ND ND PASS
089 ND ND ND ND PASS
090 ND ND ND ND PASS
092 ND ND ND ND PASS
093 ND ND ND ND PASS
095 ND ND ND ND PASS
096 ND ND ND ND PASS
097 ND ND ND ND PASS
098 ND ND ND ND PASS
099 ND ND ND ND PASS
102 ND ND ND ND PASS
103 ND ND ND ND PASS
105 ND ND ND ND PASS
107 ND ND ND ND PASS
109 ND ND ND ND PASS
110 ND ND ND ND PASS
111 ND ND ND ND PASS
112 ND ND ND ND PASS
113 ND ND ND ND PASS
114 ND ND ND ND PASS
115 ND ND ND ND PASS
116 ND ND ND ND PASS
118 ND ND ND ND PASS
119 ND ND ND ND PASS
121 ND ND ND ND PASS
122 ND ND ND ND PASS
125 ND ND ND ND PASS
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 33 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
Test Parameter: BBP DBP DEHP DiBP -
Limit (%): 0.1 0.1 0.1 0.1 -
Test Item(s) Result (%) Conclusion
128 ND ND ND ND PASS
129 ND ND ND ND PASS
130 ND ND ND ND PASS
131 ND ND ND ND PASS
132 ND ND ND ND PASS
133 ND ND ND ND PASS
135 ND ND ND ND PASS
139 ND ND ND ND PASS
142 ND ND ND ND PASS
147 ND ND ND ND PASS
150 ND ND ND ND PASS
152 ND ND ND ND PASS
154 ND ND ND ND PASS
155 ND ND ND ND PASS
156 ND ND ND ND PASS
157 ND ND ND ND PASS
159 ND ND ND ND PASS
164 ND ND ND ND PASS
167 ND ND ND ND PASS
174 ND ND ND ND PASS
175 ND ND ND ND PASS
177 ND ND ND ND PASS
182 ND ND ND ND PASS
183 ND ND ND ND PASS
184 ND ND ND ND PASS
185 ND ND ND ND PASS
186 ND ND ND ND PASS
190 ND ND ND ND PASS
194 ND ND ND ND PASS
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 34 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
Test Parameter: BBP DBP DEHP DiBP -
Limit (%): 0.1 0.1 0.1 0.1 -
Test Item(s) Result (%) Conclusion
195 ND ND ND ND PASS
196 ND ND ND ND PASS
197 ND ND ND ND PASS
204 ND ND ND ND PASS
205 ND ND ND ND PASS
207 ND ND ND ND PASS
216 ND ND ND ND PASS
217 ND ND ND ND PASS
218 ND ND ND ND PASS
220 ND ND ND ND PASS
221 ND ND ND ND PASS
222 ND ND ND ND PASS
224 ND ND ND ND PASS
225 ND ND ND ND PASS
227 ND ND ND ND PASS
228 ND ND ND ND PASS
230 ND ND ND ND PASS
231 ND ND ND ND PASS
232 ND ND ND ND PASS
233 ND ND ND ND PASS
234 ND ND ND ND PASS
235 ND ND ND ND PASS
236 ND ND ND ND PASS
237 ND ND ND ND PASS
239 ND ND ND ND PASS
241 ND ND ND ND PASS
246 ND ND ND ND PASS
250 ND ND ND ND PASS
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 35 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
Note / key:
BBP = Butyl benzyl phthalate (CAS No: 85-68-7) DBP = Dibutyl phthalate (CAS No: 84-74-2)
DEHP = Di(2-ethylhexyl) phthalate (CAS No:117-81-7)
DiBP = Diisobutyl phthalate (CAS No:84-69-5)
ND = Not detected % = percent 10000 mg/kg = 1 %mg/kg = milligram(s) per kilogramDetection Limit (%) : Each 0.005
Remark:- The amendment will be effective on 22 July 2019. For medical devices and control
instruments, effective date will be 22 July 2021.
Test Report
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.
Report No. ESTC-190411009Date: 7 May 2019Page 36 of 36
EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China
2. Photo of the Submitted Sample
EST Technology authenticate the photo on original report only*** End of Report ***