Stellaris LM3S2965 CAN Evaluation Kit
Kit Overview
The Stellaris LM3S2965 CAN Evaluation Kit
provides a compact and versatile
evaluation platform for CAN enabled
Stellaris ARM® Cortex™-M3-based
microcontrollers. Each board has an In-
Circuit Debug Interface (ICDI) that
provides hardware debugging functionality
not only for the on-board Stellaris devices,
but also for any Stellaris microcontroller-
based target board. The evaluation kits
contain all cables, software, and
documentation needed to develop and run
applications for Stellaris microcontrollers
easily and quickly. The Stellaris LM3S2965
CAN Evaluation Kit is a fully operational CAN Network-in-a-box, with a quickstart sample application that
includes a CAN network and CAN traffic, and features:
Simple setup: USB cable provides serial communication, debugging, and power
LM3S2965 CAN Evaluation Board, with:
o 50 MHz Stellaris LM3S2965 ARM Cortex-M3-based microcontroller with integrated CAN
o 128x64 pixel 16-shade monochromatic OLED display
o User-programmable push buttons and LED
o Magnetic speaker
o Convenient reset push button and power indicator LED
o Serial in-circuit debug interface over USB
o Powered over USB with included USB cable
o Break-out pads for all LM3S2965 I/O
LM3S2110 CAN Device Evaluation Board, with:
o 25 MHz Stellaris LM3S2110 ARM Cortex-M3-based microcontroller with integrated CAN
o User-programmable push buttons and LED
o Convenient reset push button and power indicator LED
o Serial in-circuit debug interface over USB
o Powered over CAN with included CAN cable
o Break-out pads for all LM3S2110 I/O
For More Details: http://www.ti.com/tool/ek-lm3s2965
Stellaris LM3S6965 Ethernet Evaluation Kits
Kit Overview
Stellaris LM3S6965 Evaluation Kits
provide a compact and versatile
evaluation platform for Ethernet
enabled Stellaris ARM® Cortex™-M3-
based microcontrollers. Each board
has an In-Circuit Debug Interface
(ICDI) that provides hardware
debugging functionality not only for
the on-board Stellaris devices, but
also for any Stellaris microcontroller-
based target board. The evaluation
kits contain all cables, software, and
documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly. The
Stellaris LM3S6965 Ethernet Evaluation Kit features:
LM3S6965 Evaluation Board
Stellaris LM3S6965 microcontroller with fully integrated 10/100 (MAC+PHY) Ethernet controller
Simple setup: USB cable provides serial communication, debugging, and power
OLED graphics display with 128 x 64 pixel resolution and 16 shades of gray
User LED, navigation switches, and select pushbuttons
Magnetic speaker
All LM3S6965 I/O available on labeled break-out pads
Standard ARM® 20-pin JTAG debug connector with input and output modes
MicroSD card slot
Retracting Ethernet cable, USB cable, and JTAG cable
Quickstart sample application runs with or without Ethernet (direct connection to your PC), right out of the
box, including an embedded web server
For More Details: http://www.ti.com/tool/ek-lm3s6965
LM3S811 Evaluation Kits
Kit Overview
Measuring just 3.5" by 1.5", the
Stellaris LM3S811 Evaluation Kit is
exceptional for its compactness
and versatility, spanning the
design spectrum from evaluation
to prototyping to application-
specific design by functioning as
both an evaluation platform for the
Stellaris LM3S811 microcontroller
and a serial in-circuit debug
interface for any Stellaris
microcontroller-based target
board. The kit features:
LM3S811 Evaluation Board
50 MHz Stellaris LM3S811 ARM Cortex-M3-based microcontroller
96x16 pixel OLED display
User-programmable push button and LED
Convenient reset push button and power indicator LED
Thumbwheel potentiometer input to the on-chip ADC
Serial in-circuit debug interface over USB
Stellaris Peripheral Driver Library, which provides a convenient, no-hassle method of initializing,
programming, and controlling peripherals on Stellaris microcontrollers
Stellaris CD packed with:
o Evaluation version of the software tools
o Complete documentation: datasheets, schematics, applications notes, and programming examples
o Quickstart guide
o Quickstart application source code
o StellarisWare® Peripheral Driver Library and example source code
o Port and example application using FreeRTOS.org™ small footprint real time operating system
For More Details: http://www.ti.com/tool/ek-lm3s811
LM3S8962 Ethernet+CAN Evaluation Kits
Kit Overview
Stellaris LM3S8962 Evaluation Kits
provide a compact and versatile
evaluation platform for Ethernet + CAN
enabled Stellaris ARM® Cortex™-M3-
based microcontrollers. Each board has
an In-Circuit Debug Interface (ICDI)
that provides hardware debugging
functionality not only for the on-board
Stellaris devices, but also for any
Stellaris microcontroller-based target
board. The evaluation kits contain all
cables, software, and documentation
needed to develop and run applications
for Stellaris microcontrollers easily and quickly. Kits feature:
LM3S8962 Evaluation Board
Stellaris LM3S8962 MCU with fully-integrated 10/100 embedded Ethernet controller
OLED graphics display with 128 x 96 pixel resolution
User LED, navigation switches, and select pushbuttons
Magnetic speaker
LM3S8962 I/O available on labeled break-out pads
Standard ARM® 20-pin JTAG debug connector with input and output modes
Standalone CAN device board using Stellaris LM3S2110 microcontroller
Ethernet cable, CAN ribbon cable, USB and JTAG cables
CD containing evaluation software tools, documentation, quickstart guide, StellarisWare® software, and
example source code
For More Details: http://www.ti.com/tool/ek-lm3s8962
MSP430 Wireless Development Tool
Description
The eZ430-RF2500 is a complete wireless
development tool for the MSP430 and
CC2500 that includes all the hardware and
software required to develop an entire
wireless project with the MSP430 in a
convenient USB stick. The tool includes a
USB-powered emulator to program and
debug your application in-system and two
2.4-GHz wireless target boards featuring
the highly integrated MSP430F2274 ultra-
low-power MCU. Projects may be
developed and instantly deployed using
the included battery expansion board and
AAA batteries. All the required software is included such as a complete Integrated Development
Environment and SimpliciTI, a propriety low-power star network stack, enabling robust wireless networks
out of the box. The eZ430-RF2500 uses the MSP430F22x4 which combines 16-MIPS performance with a
200-ksps 10-bit ADC and 2 op-amps and is paired with the CC2500 multi-channel RF transceiver designed
for low-power wireless applications.
The eZ430-RF emulator interface may be used with any Spy Bi-Wire enabled MSP430, such as the F22xx
and F20xx series, and is fully compatible with the eZ430-F2013 and eZ430-T2012 target boards. The
emulator interface can be used to download and debug your target applications, and can transmit serial data
to your PC while in or out of a debug session.
Features
CC2500 - 2.4 GHz, ISM band multi-channel low power transceiver
2 LEDs and 1 pushbutton
Supports development with some 2xx Spy Bi-Wire devices (refer to Table 1-1 in MSP430 Hardware Tools
User's Guide for complete compatibility list)
Supports MSP430 Application UART allowing serial communication to PC
Supports eZ430-T2012 and eZ430-RF2500T target boards
Removable USB stick enclosure
SimpliciTI, low power network stack
Example wireless sensor network project measuring temperature, voltage and signal strength
For More Details: http://www.ti.com/tool/ez430-rf2500
eZ430-Chronos-868 - Chronos: Wireless development tool in a watch
Overview
The eZ430-Chronos is a highly integrated,
wireless development system based for
the CC430 in a sports watch. It may be
used as a reference platform for watch
systems, a personal display for personal
area networks, or as a wireless sensor
node for remote data collection.
Based on the CC430F6137 <1 GHz RF
SoC, the eZ430-Chronos is a complete
CC430-based development system
contained in a watch. This tool features a
96 segment LCD display and provides an
integrated pressure sensor and 3-axis
accelerometer for motion sensitive control. The integrated wireless feature allows the Chronos to act as a
central hub for nearby wireless sensors such as pedometers and heart rate monitors. The eZ430-Chronos
offers temperature and battery voltage measurement and is complete with a USB-based CC1111 wireless
interface to a PC.
The eZ430-Chronos watch may be disassembled to be reprogrammed with a custom application and
includes an eZ430 USB programming interface.
What's Included:
eZ430-Chronos wireless watch
eZ430 USB programming and debugging interface
CC1111 USB RF access point
Mini Phillips screwdriver
CD containing documentation and development software
More Information
For More Details: https://estore.ti.com/Product3.aspx?ProductId=1735
MSP430 USB Stick Development Tool
Description
The eZ430-F2013 is a complete
MSP430 development tool
including all the hardware and
software to evaluate the
MSP430F2013 and develop a
complete project in a convenient
USB stick form factor. The
eZ430-F2013 supports the Code
Composer Studio and IAR
Embedded Workbench Integrated
Development Environments to
provide full emulation with the option of designing with a stand-alone system or detaching the removable
target board to integrate into an existing design. The USB port provides enough power to operate the ultra-
low-power MSP430 so no external power supply is required.
Features
eZ430-F2013 development tool including a USB debugging interface and detachableMSP430F2013 target
board
eZ430-F2013 target board
o LED indicator
o 14 user accessible pins
eZ430 debugging and programming interface
o Supports development with some 2xx Spy Bi-Wire devices (refer to Table 1-1 in MSP430 Hardware Tools
User's Guide for complete compatibility list)
o Supports eZ430-T2012 and eZ430-RF2500T target boards
Removable USB stick enclosure
Includes IAR Kickstart and Code Composer Studio which include an assembler, linker, source-level debugger
and limited C-compiler
Full documentation on CD-ROM
For More Details: http://www.ti.com/tool/ez430-f2013
TMS320F2808 Experimenter Kit
Description
The new C2000 Experimenter Kits from Texas Instruments are ideal products for OEMs to use for initial
device exploration and testing. The 2808 Experimenter Kit has a docking station with access to all
controlCARD signals, breadboard areas and RS-232, JTAG connectors, and features on board USB JTAG
emulation. Each kit contains a 2808 controlCARD. The controlCARD is a complete board level module that
utilizes and industry-standard DIMM form factor to provide a low-profiles single-board controller solution. .
Kit is complete with Code Composer Studio™ IDE v3.3 C28x™ Free 32K Byte Version. C2000 applications
software with example code and full hardware details also available. No external JTAG emulator is required
as the docking station has on board USB JTAG emulation.
Features
TMS320F2808 MCU based controlCARD
Docking station with on board USB JTAG emulation
Code Composer Studio™ IDE v3.3, C28x™ Free 32K Byte Version
Applications software and example code also available for download
For More Details: http://www.ti.com/tool/tmdsdock2808
EZ430-RF256x Bluetooth Evaluation Tool
Description
The eZ430-RF256x is a complete TI Bluetooth® evaluation and
demonstration tool for the MSP430 and TI's Bluetooth that includes
all the necessary hardware and software in a convenient USB stick.
The tool includes a USB-powered emulator to program and debug
your application and two Bluetooth target boards featuring the highly
integrated MSP430BT5190 ultra-low-power MCU & Panasonic
PAN1323 module. The required embedded software comes pre-
flashed on the MSP430 device for ease of use out of the box. The tool also comes with a sample PC game
that you can play using the target board as a remote controller. Users may download the eZ430-RF256x
Software Development Kit (SDK) to develop and instantly demonstrate Bluetooth applications using the
included battery expansion board and AAA batteries. The eZ430-RF256x SDK includes MindTree's Ethermind
Bluetooth stack, Serial Port Profile (SPP) and embedded sample applications running on FreeRTOS.
NOTE: The eZ430-RF256x SDK license requires that the MSP430BT5190 must be used only in combination
with TI's Bluetooth solutions which are a part of Panasonic modules such as PAN1325 for production. This
kit comes with the PAN1323 module for evaluation only. For production use, please use the PAN1315 or
PAN1325 modules.
Features
PAN1323 Bluetooth module with antenna (contains TI CC2560A device)
MSP430BT5190 – 25MHz, 256KB Flash, 16KB RAM, 12 Bit ADC, 4 USCIs, 32-bit HW Multi
Pre-flashed eZ430-RF256x SDK with MindTree’s Ethermind Bluetooth stack, Serial Port Profile (SPP) and
embedded sample applications running on FreeRTOS
Interactive sample PC game for demonstration of Bluetooth use in a remote control application
VTI’s 3 axis accelerometer (CMA3000-D01) with user selectable 2 g and 8 g measurement range and
capable of sub-10 uA current consumption at 40 Hz sample rate.
Temperature sensors with accuracy as low as +/- 2 degrees Celsius from -40C to +85C.
Supports software development with the MSP430BT5190 microcontroller
Removable USB stick enclosure
2 LEDs
3 pushbuttons
For More Details: http://www.ti.com/tool/ez430-rf256x
Also Check: https://estore.ti.com/EZ430-RF256X-EZ430-RF2560x-Bluetooth-Evaluation-Tool-P2732.aspx
CC2530 Mini ZNP Kit
Description
The CC2530 ZigBee Network Processor Mini
Development Kit is the perfect introduction
to ZigBee wireless sensor networks!
The CC2530ZNP Mini Development Kit is
designed for engineers who want to get
familiar with the ZigBee Network Processor
concept without having to port a lot of
software to get up and running. The ZigBee
Network Processor allows adding ZigBee
interface to any application using a simple
serial interface.
The development kit comes with three
target boards which allow users to set up a small ZigBee network. Two boards can be mobile using two AAA
batteries provided in the kit. The kit sensor boards include accelerometer, temperature sensor, and light
sensor that can be used in conjunction with led lights and push buttons to develop simple demo applications.
The free IAR MSP430 kickstart compiler can be used for developing, downloading and debugging software on
the kit - no additional tools are required. The eZ430 USB stick included in the kit is used both as debug
probe and USB serial port interface
The example software includes 30+ educational MSP430 wireless sensor applications that provide step by
step examples how to develop wireless sensor applications:
UART Interface Basic ZigBee applications
Light Sensor Interface o ZigBee Packet Error Rate tester
Accelerometer Interface o Secure ZigBee Communication
Simple ZigBee applications o Basic ZigBee Networks
o Coordinator o Simple API
o Router o Full ZigBee API
o End-Device o Coordinator/Router/End-device
o ZigBee Packet Error Rate tester
o Secure ZigBee Communication
For More Details: http://www.ti.com/tool/cc2530zdk-znp-mini
AM3359 Industrial Communications Engine (ICE)
For More Details: http://www.ti.com/tool/tmdxice3359#0
Spartan 3E Starter Board
http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,400,792&Prod=S3EBOARD
Available Quantities = 3