Date post: | 02-Apr-2018 |
Category: |
Documents |
Upload: | manuel-alvarez |
View: | 215 times |
Download: | 0 times |
7/27/2019 TG_SB-EN
http://slidepdf.com/reader/full/tgsb-en 2/4
2 03/2012 SB-JP-TG-EN
Based in Charlotte, North Carolina, SPX
Corporation (NYSE: SPW) is a global Fortune
500 multi-industry manuacturing leader. For
more inormation, please visit www.spx.com
Gear pumps are used in all types o
manuacturing industries or the transportation
o both thin and thick liquids, rom diesel
uels to chocolate. The Johnson Pump brand
heavy duty pumps are designed around high
reliability as well as long lie.
TopGear oers a combination o strong design
with small or large clearances, unique gear
tooth prole and options such as electrical
heating and built-on saety relie valves.
The extensive TopGear series is divided into
three ranges; the TG G-range or general
purposes, the TG H-range or high demanding
applications and the TG L-range that oers
high eciency when transporting low viscosity
fuids. For applications demanding leak-ree
operation a magnetically driven, TG MAG, is
available.
TopGearWhen reliability is the priority
TG G & TG H ranges
IMPROVED PRIMI NG, LOW NPSHR
• Ports above centerline
• Oversized ports or better ecency
IMPROVED DES IGN FOR LOW AND HIGH
VI SCOUS M E DIA
• Optimized gear tooth prole
• Smooth fow
HIGH EFFICIENCY
• Axial rotor locking
• Adjustable clearances
• Balanced hydraulic design
ELIM INATED LEAKAGE DUR ING
THERMAL EXPANSION
• Pin cover
• Saety sealed
SEVERAL MATERIAL OPTIONS
• Shat seal materials
• Bearing materials
• Hydraulicparts
PROLONGED
SERVICE L IFE
• Double ball bearingdesign
• Adjustable axial clearance
• Allows V-belt drive
• Accepts higher axialorces
MIN IMU M OF MAINTENANCE
• Cartridge design
• Simple design
M A X IM IZ ED L IF ET IM E
• Compact rotor
• Strong shats
• Maximized bearing design
• Possibility or selection o hardmetal bearings
• On seals thanks to seal relie channel
LESS DOWNTIME
• Front and back pull-out
FLANGE CONNECTIONS OPTIONS
• EN• ANSI
7/27/2019 TG_SB-EN
http://slidepdf.com/reader/full/tgsb-en 4/4
FOR YOUR LOCAL RE PRESE NTATIVE:
www.johnson-pump.com/JPIndustry/JohnsonPump_distributors.htm
SPX FLOW TECHNOLOGY BELGIUM N .V .
Evenbroekveld2-4•BE-9420Erpe-Mere,BELGIUM
P: +32 (0)53 60 27 15
F: +32 (0)53 60 27 01
SPX reserves the right to incorporate our latest design and material changes without notice or obligation.Design eatures, materials o construction and dimensional data, as described in this bulletin, are provided or your inormation only and should not be relied upon unless
conrmed in writing. Please contact your local sales representative or product availability in your region. For more inormation visit www.spx.com and www.johnson-pump.com.
The green “>” is a trademark o SPX Corporation, Inc.
ISSUED 03/2012 SB-JP-TG-EN
COPYRIGHT © 2012 SPX Corporation
TopGear
Internal Gear Pumps
OptionsSHAFT SEAL OPTIONS
Shaft seal options include packed gland, single and double
mechanical seals,
lip seals and
cartridge seals.
Magnetic drive available as the
TG MAG.
JACKET OPTIONS
Heating and cooling jackets
guarantee the perormance o
the pump in a start-up or a shut-down procedure. They also
provide the pump with the best condition or the seals during
operation. Dierent options: thermal oil, steam or electrical
heating.
SAFETY RELIE F
VA LVE OPTION S
Built-on saety relie valves
protect the pump, as well
as other equipment in the
system, rom over pressure.
When the pump is used bi-
directionally, a double saety
relie valve is available.