Tilt Mount Pitched Roof Structure South facing on an east west building TerraGen Environmental Group Inc. 51b Caldari Road, Unit 16, Concord, Ontario L4K 4G3 Tel: 905-760-1000 www.terragensolar.ca T • Lightweight • Quick and easy install • Fewer components • No rear wind screen • Customized for every project • Optional attachments where required • Adaptable for either standing seam clamps or hanger bolts • Effective use of roof areas due to flexible row spacing • Portrait or Landscape capabilities • Meets all wind and snow load requirements Advantages • Suitable for all 60 cell and 72 cell as well as frameless modules • Module warranties maintained Overview
Transcript
Tilt MountPitched Roof StructureSouth facing on an east west building
TerraGen Environmental Group Inc. 51b Caldari Road, Unit 16, Concord, Ontario L4K 4G3Tel: 905-760-1000 www.terragensolar.ca
T
• Lightweight
• Quick and easy install
• Fewer components
• No rear wind screen
• Customized for every project
• Optional attachments where required
• Adaptable for either standing seam clamps or hanger bolts
• Effective use of roof areas due to flexible row spacing
• Portrait or Landscape capabilities
• Meets all wind and snow load requirements
Advantages
• Suitable for all 60 cell and 72 cell as well as frameless modules
• Module warranties maintained
Overview
AdjustableEnd-Clamp
AdjustableMid-Clamp Cross Adapter Top Rail
Bonding IntegratedSplice
GroundingClip (option one)
GroundingClip (option two) Pre-Assembled Tilt Leg
M8 BoltAssembly
Grounding Lug(optional) Bottom Rail
T-BoltAssembly
Roof Attachment (optional)
1 2 3 4
6 7 8 9
10 1311 12
5
51b Caldari Road, Unit 16Concord, ON L4K 4G3
Tel: 905-760-1000Fax: 905-760-1099
Environmental Group Inc.
T
Base Rail Placement• Roof attachment points are identified and connected
• Base rail is connected to the roof attachment point
• PV array is measured & marked
• Base rails are lined up and joined with splices
Tilt Leg and Top Rail Attachment• Distances between rows are measured and tilt legs
attached to the bottom rails
• Top rails are then attached with patented click-technology
Module Installation• Modules are placed onto the top rails according to
the module manufacturer’s specifications
• Module clamps are installed and cables are placed and secured
