+ All Categories
Home > Documents > (that can be fitted with accessories) · 1 14/10/2013 101 mm 56 mm 216 mm 2 1 cla k 2 1 cla c k 3 2...

(that can be fitted with accessories) · 1 14/10/2013 101 mm 56 mm 216 mm 2 1 cla k 2 1 cla c k 3 2...

Date post: 23-Mar-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
1
1 14/10/2013 56 mm 101 mm 216 mm 3 1 2 2 1 c l a c k 336803 P N 344212 BT00648-b- Dimensional data Description 2 WIRE handset that can be fitted with accessories, wall mounted or table top installation. It has auxiliary function pushbuttons. It can be accessorised with additional pushbuttons and signalling LED (traditional wiring), as well as call exclusion card, 346800. Using the configuration procedure, the user can decide which function to associate to the auxiliary function pushbutton. When the 344212 handset is installed on video or mixed audio/video systems as the last device of the riser, or apartment line, an INPUT/OUTPUT termination 3499 must be connected to the handset itself. Technical data Power supply from SCS BUS: 18 – 27 Vdc Stand by absorption: 5 mA Max. operating absorption: 35 mA Operating temperature: 5 - 40°C P - Auxiliary function pushbutton The auxiliary function pushbutton on the handset 344212 can be used to perform several functions, determined by the value of the configurator connected to P. Configurator in P Auxiliary pushbutton function 0 Light actuator control 1 - 7 Activation of the audio function on the entrance panel configured with P = 1 to 7 9 Call to the Switchboard, in systems with the 8/2-WIRE interface 346150 Related items 337242 Handset table-top base 346800 Extra bell and/or call exclusion card 336803 AMP cable for connection on table-top base 337430 Additional pushbutton 3499 Line termination Legend 1 - Door lock key 2 - Key for auxiliary functions 3 - Bell volume adjustment Wall mounted installation Table installation Configuration The handset must be physically configured: N - handset number The N configurator assigns to each handset an identification number within the system. The handsets must be configured in progressive order. In case of handsets with parallel connection (max 3) inside the apartment without 346850 apartment interface, these must be configured using the same N configurator. Table installation of the handset with base 337242 5 - Brown 6 - Brown-white Handset suitable for wall mounted installation without the need of any accessories SPRINT handset (that can be fitted with accessories) EN 2 WIRE Video Door Entry system
Transcript
Page 1: (that can be fitted with accessories) · 1 14/10/2013 101 mm 56 mm 216 mm 2 1 cla k 2 1 cla c k 3 2 1 2 1 cla k 336803 N P 344212 BT00648-b-Dimensional data Description 2 WIRE handset

1

14/10/2013

56 mm101 mm

216

mm

2

1

c l a c k

2

1

clack

3 12

2

1

c l a c k

336803

PN

344212

BT00648-b-

Dimensional data

Description

2 WIRE handset that can be fitted with accessories, wall mounted or table top installation.It has auxiliary function pushbuttons.It can be accessorised with additional pushbuttons and signalling LED (traditional wiring), as well as call exclusion card, 346800. Using the configuration procedure, the user can decide which function to associate to the auxiliary function pushbutton.When the 344212 handset is installed on video or mixed audio/video systems as the last device of the riser, or apartment line, an INPUT/OUTPUT termination 3499 must be connected to the handset itself.

Technical data

Power supply from SCS BUS: 18 – 27 VdcStand by absorption: 5 mAMax. operating absorption: 35 mAOperating temperature: 5 - 40°C

P - Auxiliary function pushbuttonThe auxiliary function pushbutton on the handset 344212 can be used to perform several functions, determined by the value of the configurator connected to P.

Configurator in P Auxiliary pushbutton function0 Light actuator control1 - 7 Activation of the audio function on the entrance panel configured with P = 1 to 79 Call to the Switchboard, in systems with the 8/2-WIRE interface 346150

Related items

337242 Handset table-top base346800 Extra bell and/or call exclusion card336803 AMP cable for connection on table-top base337430 Additional pushbutton3499 Line termination

Legend

1 - Door lock key2 - Key for auxiliary functions 3 - Bell volume adjustment

Wall mounted installation

Table installationConfiguration

The handset must be physically configured:N - handset numberThe N configurator assigns to each handset an identification number within the system. The handsets must be configured in progressive order.In case of handsets with parallel connection (max 3) inside the apartment without 346850 apartment interface, these must be configured using the same N configurator. Table installation of the handset

with base 3372425 - Brown6 - Brown-white

Handset suitable for wallmounted installationwithout the need of any accessories

SPRINT handset(that can be fitted with accessories)

EN

2 WIRE Video Door Entry system

Recommended