Ef�cient, cost-effective and adaptable to many applications, the 9000 series Quik-Adjust beam platform can take your tape application system to the next level. We install our equipment in your plant and provide you with on-going technical service and support, ensuring you obtain optimum production levels.

ENHANCED FUNCTIONALITY COMBINED WITH EASE OF USE

Improved design• Durable guide arm assembly with near zero backlash

• Each guide arm can be moved the full length of beam

• Guide arm cover protects equipment from starch

• Dual beams available for all models

Improved operations and handling• Reduces setup time and faster changeovers

• Reduces waste and variability

• Less frequent cleaning

• Requires minimal maintenance with standard shop hardware tools

THE 9000 SERIES INCLUDES THREE MODELS TO MEET YOUR OPERATIONS REQUIREMENTS

All models available in either single or dual-beam options.

The 9000 series Quik-Adjust™ beam platform raises the bar on tape application technology.

PACKAGING

9300 9500 9700MANUAL DIGITAL AUTOMATED

Easy manual operation Easy to read digital readout for accurate setup Stores up to 200 recipes for accurate and repeatable setup

Easily adjusted without tools Closed feedback for repeatable setup Automated guide arm positioning for changeovers in seconds

™

QA 9300

Our easiest setup, no special tools required.

• Durable, easy-to-read scale on front of beam

• Each guide arm can be moved the full length of beam

• No tools required for moving guide arms into position

• Manual �ne tune adjustment within +/-1mm or 0.04 inch

• Not necessary to remove beam from corrugator to move guide arms

• Lightweight, easy to maneuver and �ts in narrow spaces

• Can easily be upgraded to 9500 or 9700 model

QA 9500

Reduce setup time and waste with our repeatable closed-loop digital readout.

• Easy-to-read digital readout

• Temporary “zero-out” display for easier repositioning

• Repeatable and accurate guide arm placement

• No tools required for moving guide arms into position

• Each guide arm can be moved the full length of beam

• Guide arm positioning within +/-1mm or 0.04 inch

• Can easily be upgraded to 9700 model

“After the initial calibration, the Quik-Adjust beam has been virtually maintenance free.” – Customer testimonial

Guide arm pointer for repeatable placement.

Quickly �ne tune within +/-1mm or .04 inch. English or metric measurements available. Model 9300.

No tools required to operate. Quick release lock levers. Models 9300 and 9500.

Web edge camera system optional on all models.

Starch shield pivots up for easy access. Standard on all models.

Features QA 9300 QA 9500 QA 9700

Beam weight (lbs/kgs) 213 / 96 218 / 98 293 / 132

Guide arm travel (in/mm) 110 / 2794 110 / 2794 110 / 2794

Guide arm minimum spacing (in/mm) 2.5 / 63.5 2.5 / 63.5 2.62 / 66.55

Number of guide arms single beam 8 8 8

Number of guide arms dual beam 8/8 8/8 8/8

Starch shield standard Yes Yes Yes

Position feedback No Yes Yes

Gang beam adjustable Yes Yes Yes

Guide arm backlash +/-1mm or +/-0.04 inch +/-1mm or +/-0.04 inch +/-1mm or +/-0.04 inch

Number of recipes stored N/A N/A 200

Air requirements No No No

Power requirements N/A 120VAC/240VAC 120VAC/240VAC

Guide arm crash detection N/A N/A Yes

Jog guide arm mode N/A N/A Yes

Select guide arms for gang adjust N/A N/A Yes

Dual beam - upper independent of lower Yes Yes Yes

CE Certi�ed available for Europe

9000 SERIES MODEL COMPARISON

QA 9700

Advanced technology ensures smooth, mistake-proof operation and offers automated process options.

• Touch-screen programming and diagnostics

• Automated guide arm positioning

• Closed loop stepper control system

• Each guide arm can be moved the full length of beam

• Guide arms can move in multiple directions simultaneously

• Guide arm positioning within +/-1mm or 0.04 inch

• No homing routine needed, even after power failure

• No air required

• Automated �ne tune and gang adjust

• Back-to-back order capability without pulling beam from corrugator

• Wi-Fi remote control panel available as option

Model 9700 - Touch screen programming, displays target and actual positions. Manual mode allows you to move individual guide arms.

Heavy duty, wide casters provide better maneuverability.

IMPORTANT: It is the user’s responsibility to test and determine the suitability of a product for the user’s intended use. Any product samples provided for testing are provided in accordance with standard limited warranties as stated on our technical data sheets.

© H.B. Fuller Company, 2016. 0100 – Rev. 05/2016

Join the Conversation | www.hbfuller.com/connect

For more information about our company, visit www.hbfuller.com.

STATE OF THE ART PLATFORM FOR DRY ENDSimple and easy to use applicator for on-the-board tape applications

• Staging from the side of beam

Supports roll-to-roll splicing

No need to carry tapes over the corrugator

Optional cut and hold feature

•

•

•

SMARTER ADHESIVES. BETTER PROTECTION.At H.B. Fuller, we make it our business to know your industry and processes inside out, and bring in-depth knowledge to help solve the speci�c challenges you face. We provide adhesive solutions for many different types of packaging including case and carton, end-of-line, �exible packaging, retail ready, packaging containment, specialty and more. Connect what matters to your business today with H.B. Fuller.

Manual DigitalCat walk Recommended Optional

Guide Arm Travel (in/mm) 110 / 2794 110 / 2794

Guide Arm Minimum Spacing (in/cm) 4.5 / 11.43

Number of Guide Arms 4/6/8

Guide arm positioning Ruled Digital

Power requirements 120VAC / 240VAC 120VAC / 240VAC

Recommended dispenser DE Model VIII, 4/6/8 out

Modular Applicator Basic / Basic+Cut/hold Basic / Basic+Cut/hold

9200DE 9400DE 9600DE

AutomaticOptional

110 / 2794

Automated

120VAC / 240VAC

Basic / Basic+Cut/hold

4.5 / 11.43 4.5 / 11.43

4/6/8 4/6/8

DE Model VIII, 4/6/8 out DE Model VIII, 4/6/8 out

Features