8
TECHNICAL PARAMETERSDoors opening to the outside Doors opening to the inside
Mounting a door frame in a plasterboard wall
Clear opening:
Openingin the wall
Width of the door frame
206 210,4 212
210 214,4 216
220 224,4 226
230 234,4 236
240 244,4 246
250 254,4 256
260 264,4 266
270 274,4 276
Openingin the wall
Width of the door frame
70 78,7 82
80 88,7 92
80 plus 92,7 96
90 98,7 102
90 plus 102,7 106
100 108,7 112
It is possible to manufacture doors in customised dimensions: height up to 300 cm, width up to 120 cm
System 'COMPLETE'
It is a modern and minimalistic design based on the idea of invisible elements such as a hidden door frame,
hidden system of fittings or a possibility to finish the door with the same material as the wall regardless of the
solution. The system consists of:
ź double door in a classic system with two wings: one movable and one passive ź double door in a dresser system, both wings are activeź door made wholly of glass with a hidden door frame and an aesthetic piano hingeź sliding system without a door frame with a hidden guideź plinth strip levelled with the wallź system for hiding technical cabinets, utility niches, hiding places
Double doorsFinishing:Mirror
The aluminium structure of the door enables finishing it with a different material on each side, which is
impossible in case of a traditional wooden door.The panels used on the door wings can also be used for wall facing and the door frame enables easy levelling
and aesthetic finishing.
Dooors opening outside Doors opening inside
door frame together with the door profile are authorial and patented products of Zeromur with
appropriate technical approvals. The system is characterised by that it is made of materials and elements of the
highest quality:
ź aluminium profiles pressed by the Swedish concern SAPA – a worldwide
leader in aluminium productionź door profile in two anode colours: natural and brushed steel with an
enhanced thickness of the layer resistant to scratchesź the aluminium construction is bonded with a glue made by the Swiss
producer Sika – a leader in production of chemical gluesź hinges are regulated in 3 planes and are certificated by ift Rosenheim
Instituteź (200 000 thousands of opening cycles)ź magnetic-mechanical lock made by KFV, a German producerź XPS filler made by DOW Chemicals enhances the thermal and acoustic
insulation as well as improves the wing stiffness
The application of the above mentioned elements made by renowned producers allows for making a system
of the highest quality that will ensure safety, comfort and design for long years.The aluminum construction allows for making a door up to 300 cm high and for significant reduction of the
door weight making usage of heavier finishing materials possible.
The
The aluminium door system Zeromur consists of an aluminium door frame hidden in the wall and a door wing made of
a multi-chamber aluminium profile. Zeromur allows for levelling of the door with the wall surface giving the effect of
hidden door. The following materials can be used for finishing the door:
ź acrylic, CRYSTAL glass acrylic ź metalized boardsź glass, mirror, lacobel ź wall papers, leather, fabricsź ceramic tiles, sinter, mosaic, concrete, stone ź wall paint, structural plastersź varnished surface, HPL laminates, veneers ź other materials
The Zeromur door system can be fitted with additional elements:• idden door closer GEZE • drop seal • Assa Abloy door lock• various types of locks: • toilet • insertion • key
Mounting a door frame in a masonry wall
Facing a door frame with tiles
10
0/1
50
un
d m
eh
r
10
0/1
50
un
d m
eh
r
75
/10
0
Height of the door frame
Height of the door frame
zeromurTransporowa 1/770-715 Szczecin+48 91 463 64 [email protected]
TECHNICAL PARAMETERSDoors opening to the outside Doors opening to the inside
Mounting a door frame in a plasterboard wall
Clear opening:
Openingin the wall
Width of the door frame
206 210,4 212
210 214,4 216
220 224,4 226
230 234,4 236
240 244,4 246
250 254,4 256
260 264,4 266
270 274,4 276
Openingin the wall
Width of the door frame
70 78,7 82
80 88,7 92
80 plus 92,7 96
90 98,7 102
90 plus 102,7 106
100 108,7 112
It is possible to manufacture doors in customised dimensions: height up to 300 cm, width up to 120 cm
System 'COMPLETE'
It is a modern and minimalistic design based on the idea of invisible elements such as a hidden door frame,
hidden system of fittings or a possibility to finish the door with the same material as the wall regardless of the
solution. The system consists of:
ź double door in a classic system with two wings: one movable and one passive ź double door in a dresser system, both wings are activeź door made wholly of glass with a hidden door frame and an aesthetic piano hingeź sliding system without a door frame with a hidden guideź plinth strip levelled with the wallź system for hiding technical cabinets, utility niches, hiding places
Double doorsFinishing:Mirror
The aluminium structure of the door enables finishing it with a different material on each side, which is
impossible in case of a traditional wooden door.The panels used on the door wings can also be used for wall facing and the door frame enables easy levelling
and aesthetic finishing.
Dooors opening outside Doors opening inside
door frame together with the door profile are authorial and patented products of Zeromur with
appropriate technical approvals. The system is characterised by that it is made of materials and elements of the
highest quality:
ź aluminium profiles pressed by the Swedish concern SAPA – a worldwide
leader in aluminium productionź door profile in two anode colours: natural and brushed steel with an
enhanced thickness of the layer resistant to scratchesź the aluminium construction is bonded with a glue made by the Swiss
producer Sika – a leader in production of chemical gluesź hinges are regulated in 3 planes and are certificated by ift Rosenheim
Instituteź (200 000 thousands of opening cycles)ź magnetic-mechanical lock made by KFV, a German producerź XPS filler made by DOW Chemicals enhances the thermal and acoustic
insulation as well as improves the wing stiffness
The application of the above mentioned elements made by renowned producers allows for making a system
of the highest quality that will ensure safety, comfort and design for long years.The aluminum construction allows for making a door up to 300 cm high and for significant reduction of the
door weight making usage of heavier finishing materials possible.
The
The aluminium door system Zeromur consists of an aluminium door frame hidden in the wall and a door wing made of
a multi-chamber aluminium profile. Zeromur allows for levelling of the door with the wall surface giving the effect of
hidden door. The following materials can be used for finishing the door:
ź acrylic, CRYSTAL glass acrylic ź metalized boardsź glass, mirror, lacobel ź wall papers, leather, fabricsź ceramic tiles, sinter, mosaic, concrete, stone ź wall paint, structural plastersź varnished surface, HPL laminates, veneers ź other materials
The Zeromur door system can be fitted with additional elements:• idden door closer GEZE • drop seal • Assa Abloy door lock• various types of locks: • toilet • insertion • key
Mounting a door frame in a masonry wall
Facing a door frame with tiles
10
0/1
50
un
d m
eh
r
10
0/1
50
un
d m
eh
r
75
/10
0
Height of the door frame
Height of the door frame
zeromurTransporowa 1/770-715 Szczecin+48 91 463 64 [email protected]
Finishing:Acrylic
Sliding doorsGHOSTFinishing:Acrylic
Finishing:Printed glass
Finishing:Stone
Finishing:Printed glass wykończenie:
szkło drukowane
Finishing:Acrylic
Finishing:Acrylic
Sliding doorsGHOSTFinishing:Acrylic
Finishing:Printed glass
Finishing:Stone
Finishing:Printed glass wykończenie:
szkło drukowane
Finishing:Acrylic
Finishing:Acrylic
Sliding doorsGHOSTFinishing:Acrylic
Finishing:Printed glass
Finishing:Stone
Finishing:Printed glass wykończenie:
szkło drukowane
Finishing:Acrylic
Finishing:Acrylic
Sliding doorsGHOSTFinishing:Acrylic
Finishing:Printed glass
Finishing:Stone
Finishing:Printed glass wykończenie:
szkło drukowane
Finishing:Acrylic
Finishing:Acrylic
Sliding doorsGHOSTFinishing:Acrylic
Finishing:Printed glass
Finishing:Stone
Finishing:Printed glass wykończenie:
szkło drukowane
Finishing:Acrylic
TECHNICAL PARAMETERSDoors opening to the outside Doors opening to the inside
Mounting a door frame in a plasterboard wall
Clear opening:
Openingin the wall
Width of the door frame
206 210,4 212
210 214,4 216
220 224,4 226
230 234,4 236
240 244,4 246
250 254,4 256
260 264,4 266
270 274,4 276
Openingin the wall
Width of the door frame
70 78,7 82
80 88,7 92
80 plus 92,7 96
90 98,7 102
90 plus 102,7 106
100 108,7 112
It is possible to manufacture doors in customised dimensions: height up to 300 cm, width up to 120 cm
System 'COMPLETE'
It is a modern and minimalistic design based on the idea of invisible elements such as a hidden door frame,
hidden system of fittings or a possibility to finish the door with the same material as the wall regardless of the
solution. The system consists of:
ź double door in a classic system with two wings: one movable and one passive ź double door in a dresser system, both wings are activeź door made wholly of glass with a hidden door frame and an aesthetic piano hingeź sliding system without a door frame with a hidden guideź plinth strip levelled with the wallź system for hiding technical cabinets, utility niches, hiding places
Double doorsFinishing:Mirror
The aluminium structure of the door enables finishing it with a different material on each side, which is
impossible in case of a traditional wooden door.The panels used on the door wings can also be used for wall facing and the door frame enables easy levelling
and aesthetic finishing.
Dooors opening outside Doors opening inside
door frame together with the door profile are authorial and patented products of Zeromur with
appropriate technical approvals. The system is characterised by that it is made of materials and elements of the
highest quality:
ź aluminium profiles pressed by the Swedish concern SAPA – a worldwide
leader in aluminium productionź door profile in two anode colours: natural and brushed steel with an
enhanced thickness of the layer resistant to scratchesź the aluminium construction is bonded with a glue made by the Swiss
producer Sika – a leader in production of chemical gluesź hinges are regulated in 3 planes and are certificated by ift Rosenheim
Instituteź (200 000 thousands of opening cycles)ź magnetic-mechanical lock made by KFV, a German producerź XPS filler made by DOW Chemicals enhances the thermal and acoustic
insulation as well as improves the wing stiffness
The application of the above mentioned elements made by renowned producers allows for making a system
of the highest quality that will ensure safety, comfort and design for long years.The aluminum construction allows for making a door up to 300 cm high and for significant reduction of the
door weight making usage of heavier finishing materials possible.
The
The aluminium door system Zeromur consists of an aluminium door frame hidden in the wall and a door wing made of
a multi-chamber aluminium profile. Zeromur allows for levelling of the door with the wall surface giving the effect of
hidden door. The following materials can be used for finishing the door:
ź acrylic, CRYSTAL glass acrylic ź metalized boardsź glass, mirror, lacobel ź wall papers, leather, fabricsź ceramic tiles, sinter, mosaic, concrete, stone ź wall paint, structural plastersź varnished surface, HPL laminates, veneers ź other materials
The Zeromur door system can be fitted with additional elements:• idden door closer GEZE • drop seal • Assa Abloy door lock• various types of locks: • toilet • insertion • key
Mounting a door frame in a masonry wall
Facing a door frame with tiles
10
0/1
50
un
d m
eh
r
10
0/1
50
un
d m
eh
r
75
/10
0
Height of the door frame
Height of the door frame
zeromurTransporowa 1/770-715 Szczecin+48 91 463 64 [email protected]
TECHNICAL PARAMETERSDoors opening to the outside Doors opening to the inside
Mounting a door frame in a plasterboard wall
Clear opening:
Openingin the wall
Width of the door frame
206 210,4 212
210 214,4 216
220 224,4 226
230 234,4 236
240 244,4 246
250 254,4 256
260 264,4 266
270 274,4 276
Openingin the wall
Width of the door frame
70 78,7 82
80 88,7 92
80 plus 92,7 96
90 98,7 102
90 plus 102,7 106
100 108,7 112
It is possible to manufacture doors in customised dimensions: height up to 300 cm, width up to 120 cm
System 'COMPLETE'
It is a modern and minimalistic design based on the idea of invisible elements such as a hidden door frame,
hidden system of fittings or a possibility to finish the door with the same material as the wall regardless of the
solution. The system consists of:
ź double door in a classic system with two wings: one movable and one passive ź double door in a dresser system, both wings are activeź door made wholly of glass with a hidden door frame and an aesthetic piano hingeź sliding system without a door frame with a hidden guideź plinth strip levelled with the wallź system for hiding technical cabinets, utility niches, hiding places
Double doorsFinishing:Mirror
The aluminium structure of the door enables finishing it with a different material on each side, which is
impossible in case of a traditional wooden door.The panels used on the door wings can also be used for wall facing and the door frame enables easy levelling
and aesthetic finishing.
Dooors opening outside Doors opening inside
door frame together with the door profile are authorial and patented products of Zeromur with
appropriate technical approvals. The system is characterised by that it is made of materials and elements of the
highest quality:
ź aluminium profiles pressed by the Swedish concern SAPA – a worldwide
leader in aluminium productionź door profile in two anode colours: natural and brushed steel with an
enhanced thickness of the layer resistant to scratchesź the aluminium construction is bonded with a glue made by the Swiss
producer Sika – a leader in production of chemical gluesź hinges are regulated in 3 planes and are certificated by ift Rosenheim
Instituteź (200 000 thousands of opening cycles)ź magnetic-mechanical lock made by KFV, a German producerź XPS filler made by DOW Chemicals enhances the thermal and acoustic
insulation as well as improves the wing stiffness
The application of the above mentioned elements made by renowned producers allows for making a system
of the highest quality that will ensure safety, comfort and design for long years.The aluminum construction allows for making a door up to 300 cm high and for significant reduction of the
door weight making usage of heavier finishing materials possible.
The
The aluminium door system Zeromur consists of an aluminium door frame hidden in the wall and a door wing made of
a multi-chamber aluminium profile. Zeromur allows for levelling of the door with the wall surface giving the effect of
hidden door. The following materials can be used for finishing the door:
ź acrylic, CRYSTAL glass acrylic ź metalized boardsź glass, mirror, lacobel ź wall papers, leather, fabricsź ceramic tiles, sinter, mosaic, concrete, stone ź wall paint, structural plastersź varnished surface, HPL laminates, veneers ź other materials
The Zeromur door system can be fitted with additional elements:• idden door closer GEZE • drop seal • Assa Abloy door lock• various types of locks: • toilet • insertion • key
Mounting a door frame in a masonry wall
Facing a door frame with tiles
10
0/1
50
un
d m
eh
r
10
0/1
50
un
d m
eh
r
75
/10
0
Height of the door frame
Height of the door frame
zeromurTransporowa 1/770-715 Szczecin+48 91 463 64 [email protected]
![Links [countywindows.localworldlab.co.uk] · composite doors. Designed to match and complement aluminium profile, the ‘Links’ door looks like aluminium, feels like aluminium](https://static.documents.pub/doc/80x56/5f5c7cf6dac7055e127295da/links-composite-doors-designed-to-match-and-complement-aluminium-proile.jpg)
