The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 1 of 18
Certification Body Locations:
1 COV – Central Office Praha Novodvorská 994, 142 21 Praha 4
2 Office Brno třída Kpt. Jaroše 25, 602 00 Brno
3 Office Ostrava Teslova 2, 702 00 Ostrava
4 Office Plzeň Zikmunda Wintra 21, 320 16 Plzeň
5 Office Praha Novodvorská 994, 142 21 Praha 4
6 Office Ústí nad Labem Malátova 2509/14, 400 01 Ústí nad Labem
Certification of products (including material products, processes, services)
Material Products
Ordinal number1
Product/Product group name Certification scheme Specification of standards
(normative documents)
1.* General machinery
Metal-working machinery
Compressors
Pumps
Conveyors
Fans
SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN ISO 12100
ČSN EN ISO 13857
ČSN EN ISO 13855
ČSN EN ISO 13850
ČSN EN 349+A1
ČSN EN ISO 14120
ČSN EN ISO 13849-1
ČSN EN ISO 4413
ČSN EN ISO 4414
ČSN EN ISO 14119
ČSN EN 60204-1 ed. 2
ČSN EN 60204-1 ed. 3
ČSN EN 547-1+A1
ČSN EN 547-2+A1
ČSN EN 547-3+A1
ČSN EN ISO 13851
ČSN EN 60447 ed. 2
ČSN ISO 3864-1
ČSN EN ISO 14122-1
ČSN EN ISO 14122-2
ČSN EN ISO 14122-3
ČSN EN ISO 14122-4
ČSN EN ISO 13732-1
ČSN EN 842+A1
ČSN EN 894-1+A1
ČSN EN 981+A1
ČSN EN 1012-1
ČSN EN 809+A1
ČSN ISO 1050
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 2 of 18
Ordinal number1
Product/Product group name Certification scheme Specification of standards
(normative documents)
ČSN ISO 1819
ČSN ISO 7149
ČSN ISO 9851
ČSN EN ISO 16089
ČSN EN ISO 16090-1
ČSN EN ISO 23125
ČSN EN 12717+A1
ČSN EN ISO 16093
ČSN EN 61000-6-2 ed.3
ČSN EN 61000-6-4 ed.2
2.* Appliances and machines for
large kitchens and commercial
use
Cooking ranges, ovens and hob
elements
Multi-purpose frying and
cooking pans
Dishwashing machines
Food warmers
Kitchen machines
Vending machines
SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN 60335-1 ed. 3 +O2,
A1, A2
ČSN EN 60335-2-12 ed. 2
+A2
ČSN EN 60335-2-36 ed. 3
ČSN EN 60335-2-37 ed. 3
ČSN EN 60335-2-38 ed. 3
ČSN EN 60335-2-39 ed. 3
ČSN EN 60335-2-42 ed. 3
ČSN EN 60335-2-47 ed. 3
ČSN EN 60335-2-48 ed. 3
ČSN EN 60335-2-49 ed. 3
ČSN EN 60335-2-50 ed. 3
ČSN EN 60335-2-58 ed. 3
ČSN EN 60335-2-62 ed. 2
ČSN EN 60335-2-64 ed. 2
ČSN EN 60335-2-75 ed. 2
ČSN EN 60335-2-90 ed. 3
ČSN EN 60335-2-99
ČSN EN 60335-2-109, A1,A2
ČSN EN 55014-1 ed.4
ČSN EN 55014-2 ed.2
3.* Cooling equipment for
industrial and commercial use
SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN ISO 12100
ČSN EN ISO 13857
ČSN EN ISO 13850
ČSN EN ISO 14119
ČSN EN ISO 14120
ČSN EN 378-1
ČSN EN 378-2
ČSN EN 60204-1 ed. 2
ČSN EN 60204-1 ed. 3
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 3 of 18
Ordinal number1
Product/Product group name Certification scheme Specification of standards
(normative documents)
ČSN EN 60335-1 ed. 3 +O2,
A1, A2
ČSN EN 60335-2-89 ed. 2
ČSN EN 61000-6-2 ed. 3
ČSN EN 61000-6-4 ed. 2
4.*
Lighting for commercial use SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN 60598-1 ed. 6+A1
ČSN EN 60598-2-1
ČSN EN 60598-2-3 ed. 2
ČSN EN 60598-2-17 +A2+Z1
ČSN EN IEC 60598-2-17
ČSN EN 60598-2-18
ČSN EN 61347-1 ed. 3
ČSN EN 61347-2-11
ČSN EN 61347-2-13 ed. 2
ČSN EN 62031
ČSN EN 55032 ed.2
ČSN EN 55103-2 ed.2
ČSN EN 61000-3-2 ed.4
ČSN EN 61000-3-3 ed. 3
ČSN EN 62471
5.* Measurement, control and
laboratory equipment for
professional use
SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN 61010-1 ed. 2+A1
ČSN EN 61010-2-010 ed. 3
ČSN EN 61010-2-020 ed. 2
ČSN EN 61010-2-020 ed.3
ČSN EN 61010-2-040 ed. 2
ČSN EN 61010-2-051 ed. 3
ČSN EN 61010-2-201, Z1
ČSN EN IEC 61010-2-201 ed.
2
ČSN EN 61326-1 ed. 2
6.* Office machines and
information technology for
professional use
SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN 60950-1 ed. 2 + Z1
ČSN EN 62368-1
ČSN EN 60950-21
ČSN EN 60950-22
ČSN EN 60950-22 ed.2
ČSN EN 55032 ed.2
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 4 of 18
Ordinal number1
Product/Product group name Certification scheme Specification of standards
(normative documents)
7.* Household sockets and plugs SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN IEC 60884-1 + A1 + A2
ČSN 35 4516 + Z1
8.* Transportable pressure
equipment
SCH1a)V8 P540-031p4
based on the scheme 1a)
of ČSN EN
ISO/IEC 17067:2014
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
NZS 5454
ČSN EN ISO 11439
ČSN EN ISO 9809-1
ČSN EN ISO 9809-2
ČSN EN ISO 11120
CSA/ANSI NGV 2
9.* Permanently installed outdoor
fitness equipment
SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN 16630
10.* Playing field equipment –
Football goals
Handball goals
Tennis equipment
Volleyball equipment
Basketball equipment
SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN 748+A1
ČSN EN 749
ČSN EN 1510
ČSN EN 1271
ČSN EN 1270
11.* Playground surfacing SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN 1177
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 5 of 18
Ordinal number1
Product/Product group name Certification scheme Specification of standards
(normative documents)
12.* Shower enclosures SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN 14428+A1
13.* Playground equipment SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN 1176-1 ed.2
ČSN EN 1176-2 ed. 2
ČSN EN 1176-3 ed. 2
ČSN EN 1176-4 ed. 2
ČSN EN 1176-5
ČSN EN 1176-6 ed.2
ČSN EN 1176-10
ČSN EN 1176-11
14. * Ladders SCH1a)V8 P540-031p4
SCH3 V8 P540-031p4
(based on the
scheme 1a),3 of ČSN
EN
ISO/IEC 17067:2014,
based on testing and
inspection)
ČSN EN 131-1 ed.2
ČSN EN 131-2+A2
ČSN EN 131-3
ČSN EN 131-4
ČSN EN 131-6
ČSN EN 131-7
1) Asterisk at the ordinal number identifies that within the scope of accreditation, the certification body is allowed to include
new/updated/revised normative documents from time to time. Updated list of normative documents provided within the
scope of accreditation is available at the Certification Body from the Certification Body Manager.
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 6 of 18
Processes, services
Ordinal number
Process/service name Certification scheme Specification of standards
(normative documents)
1. Welding process in manufacture
of metal structures and fabricated
metal products
ČSN EN ISO 3834-2:2006
ČSN EN ISO 3834-3:2006
ČSN EN ISO 3834-4:2006
EN ISO 3834-2:2005
EN ISO 3834-3:2005
EN ISO 3834-4:2005
2. Welding process in manufacture
(and repair) of machinery and
equipment n.e.c.
ČSN EN ISO 3834-2:2006
ČSN EN ISO 3834-3:2006
ČSN EN ISO 3834-4:2006
EN ISO 3834-2:2005
EN ISO 3834-3:2005
EN ISO 3834-4:2005
3. Welding process in manufacture
of motor vehicles and other
transport equipment
ČSN EN ISO 3834-2:2006
ČSN EN ISO 3834-3:2006
ČSN EN ISO 3834-4:2006
EN ISO 3834-2:2005
EN ISO 3834-3:2005
EN ISO 3834-4:2005
4. Welding of rail vehicles and their
parts
ČSN EN ISO 3834-2:2006
ČSN EN ISO 3834-3:2006
ČSN EN ISO 3834-4:2006
EN ISO 3834-2:2005
EN ISO 3834-3:2005
EN ISO 3834-4:2005
ČSN EN 15085-2:2008
EN 15085-2:2007
5. Welding process in construction ČSN EN ISO 3834-2:2006
ČSN EN ISO 3834-3:2006
ČSN EN ISO 3834-4:2006
EN ISO 3834-2:2005
EN ISO 3834-3:2005
EN ISO 3834-4:2005
6. Welding process in repair of
motor vehicles
ČSN EN ISO 3834-2:2006
ČSN EN ISO 3834-3:2006
ČSN EN ISO 3834-4:2006
EN ISO 3834-2:2005
EN ISO 3834-3:2005
EN ISO 3834-4:2005
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 7 of 18
Ordinal number
Process/service name Certification scheme Specification of standards
(normative documents)
7. Cosmetics - Good manufacturing
practice (GMP)
SCH6 V8 P540-031p4
(based on the Scheme 6
of ČSN EN
ISO/IEC 17067:2014,
based on the
Management System
Audit)
ČSN EN ISO 22716:2008
EN ISO 22716:2007
8. Certification of chain-of-custody of forest based products for the area of:
8.1 Unhewn timber, other forest
products, timber chips
TD CFCS 2003:20123)
chapt. 8 to 14
TD CFCS 2002:20132)
as amended by national versions
of the document, for example:
PEFC ST 2002:2013
PEFC D ST 2002:2013
PEFC ITA 1002:2013
8.2 Tools, toys, sports equipment and
musical instruments
8.3 Wood, timber, including sawn or
impregnated
8.4 Veneer sheets, plywood,
lamiboards, particle boards,
fibreboards and other boards,
parts, components etc.
8.5 Construction works and their parts
8.6 Wooden containers
8.7 Other products of wood except
furniture
8.8 Pulp from wood or other cellulose
pulpwood
8.9 Paper, cardboard and paperboard
8.10 Corrugated paper, cardboard and
paperboard, containers of paper
and paperboard
8.11 Household and sanitary goods and
toilet requisites of paper
8.12 Wallpaper
8.13 Other articles of paper, cardboard
and paperboard
8.14 Wood charcoal and fuel wood
8.15 Wooden seating furniture, its
parts, industrial services and
manufacture
8.16 Other wooden office and shop
furniture, industrial manufacture
8.17 Wooden kitchen furniture,
industrial manufacture
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 8 of 18
Ordinal number
Process/service name Certification scheme Specification of standards
(normative documents)
8.18 Other wooden furniture
8.19 Timber structures
8.20 Floor and wall covering
8.21 Other products made of wood
8.22 Decoration products made of
wood, paper and cork
8.23 Non-wood forest products
8.24 Products made of wood, cork and
wicker
8.25 Products for printing
9. Certification of sustainable biofuel production chain process and verification of greenhouse
gases emission reports of motor petrol or diesel suppliers
9.1 Certification of sustainable biofuel
production chain process
§ 21 p. 5 and § 34 p. 3
of Act No.
201/2012 Coll., on air
protection, as amended
§ 9 and Annex No. 5 of the
Government Regulation No.
189/2018 Coll. on sustainability
criteria for biofuels and the
reduction of greenhouse gas
emissions from fuels
9.1.1 Certification of quality
management systems of suppliers
of products meeting sustainability
criteria
9.1.2 production, import or sale of
biofuels and import or sale of
motor gasoline or diesel fuel
with added biofuel1)
9.1.3 production, import or sale of
liquid or gaseous products for
biofuel production
9.1.4 sale or import of biomass
9.2 Verification of greenhouse gases
emission reports of motor petrol
or diesel suppliers
§ 20 p. 4 of Act No.
201/2012 Coll., on air
protection, as amended
§ 20 p. 3 of the Act No. 201/2012
Coll., on air protection, as
amended, § 6 of the Government
Regulation No. 189/2018 Coll.
on sustainability criteria of
biofuels and the reduction of
greenhouse gas emissions from
fuels
9.2.1 Verification of greenhouse gases
emission reports of fuel suppliers
1) Applies only to the sale or import of motor gasoline or diesel fuel with added biofuel within the system of conditional tax exemption or free tax circulation from another European Union member state 2) TD CFCS 2002:2013 is a translation of PEFC document: PEFC ST 2002:2013 Chain of Custody of Forest Based Products – Requirements, Second Edition. 3) TD CFCS 2003:2012 is a translation of PEFC document: PEFC ST 2003:2012
Requirements for Certification Bodies operating Certification against the PEFC International
Chain of Custody Standard
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 9 of 18
Accreditation for authorization/notification purposes
Ordinal
number1 Product/Product group name
Conformity assessment
procedure/module
Basic requirements: Product
specifications/characteristics/technical
standards2)
1. Machinery according to NV No. 176/2008 Coll., resp. Directive 2006/42 / EC
1.1 1.1 Circular saws (single- or
multi-blade) for working with
wood and material with similar
physical characteristics or for
working with meat and
material with similar physical
characteristics:
Sawing machinery with fixed
blade(s) during cutting, having
a fixed bed or support with
manual feed of the workpiece
or with a demountable power
feed
Government
Regulation No.
176/2008 Coll., as
amended
(2006/42/EC)
EC type examination
Comprehensive
quality assurance
Annex No. 1, Government
Regulation No. 176/2008 Coll.,
1.2 2. Hand-fed surface planing
machinery for woodworking
1.3 3. Thicknessers for one-side
dressing having a built-in
mechanical feed device, with
manual loading and/or
unloading for woodworking
1.4 4. Band-saws with manual
loading and/or unloading for
working with wood
1.5 5. Combined machines for
timber processing
1.6 6. Hand-fed tenoning
machinery with several tool
holders for woodworking
1.7 7. Hand-fed vertical spindle
moulding machinery for
working with wood
1.8 9. Presses, including press
brakes, for cold working of
metals with manual insertion or
extraction, with stroke more
than 6 mm and speed more
than 30 mm/s
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 10 of 18
Ordinal
number1 Product/Product group name
Conformity assessment
procedure/module
Basic requirements: Product
specifications/characteristics/technical
standards2)
1.9 10. Injection or compression
plastics-moulding machinery
with manual loading or
unloading
1.10 11. Injection or compression
rubber-moulding machinery
with manual loading or
unloading
1.11 13. Manually loaded trucks for
the collection of household
refuse incorporating a
compression mechanism
1.12 16. Vehicle servicing lifts
1.13 17. Devices for the lifting of
persons or of persons and
goods involving a hazard of
falling from a vertical height of
more than three metres
2. Simple pressure vessels according to Government Regulation No. 119/2016 Coll., Resp
Directive 2014/29 / EC
2.1 Simple pressure vessels Government
Regulation No.
119/2016 Coll., as
amended
2014/29/EC
Modul B
Modul C1
Modul C2
Modul C
Annex No. 1, Government
Regulation No. 119/2016 Coll.,
3. Construction products to Government Regulation No. 163/2002 Coll.
3.1 Metallic structural sections/
profiles.
Hot-rolled, cold-formed or
otherwise produced cross-
sections / profiles of various
shapes (T, L, H, U, Z, I, groove
profiles, angles, closed
profiles, tubes), flat products
(sheets, thin sheets, strips),
bars, castings, forgings made
of various metallic materials,
unprotected or protected by
Government
Regulation
No.163/2002 Coll.
§6
TN 04_01_01
TN 04_01_02
TN 04_01_03
TN 04_01_04
TN 04_01_05
TN 04_01_06
TN 04_01_09
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 11 of 18
Ordinal
number1 Product/Product group name
Conformity assessment
procedure/module
Basic requirements: Product
specifications/characteristics/technical
standards2)
corrosion treatment. For use in
metal structures or in
composite metal and concrete
structures (product group 4/1)
3.2 Structural metal building parts
a) Finished metal products,
such as beams, columns,
staircases, piles and piles, rails
and sleepers, products with
cross-sections cut to size for
certain applications (except
sleepers) These products can
be used in load-bearing
structures. They may be
unprotected or protected
against corrosion, welded or
non-welded
(product group 4/2)
Government
Regulation
No.163/2002 Coll.
§5a, §6
TN 04_02_01_a_b
TN 04_02_02_a
TN 04_02_03_a
TN 04_02_04_a
TN 04_02_05_a
TN 04_02_07_a
TN 04_02_08_a
TN 04_02_09_a_b
3.3 Products for outdoor drainage
systems
(a) Manhole covers and gullies
b) Manholes and inspection
manholes, steel steps, ladders
and handrails for manholes and
manholes (excluding concrete
manholes)
(product group 7/4)
Government
Regulation
No.163/2002 Coll.
§5a, §8
TN 07_04_01_a
TN 07_04_03_b
3.4 Pipe assemblies, pipes, tanks,
leak alarm system and overfill
prevention equipment, fittings,
adhesives, joints, joints and
gaskets, pipes and pipelines,
supporting structures for pipes
and pipelines, safety
accessories (only plastic,
fiberglass tanks and metal,
pipes, fittings and their
assemblies of steel and cast
iron)
(a) installations for the
transport / distribution / storage
of water not intended for
human consumption
Government
Regulation
No.163/2002 Coll.
§7, §8
TN 07_08_09_a_c
TN 07_08_10_a_c
TN 07_08_12_a_c
TN 07_08_13_a_c
TN 07_08_14_a_c
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 12 of 18
Ordinal
number1 Product/Product group name
Conformity assessment
procedure/module
Basic requirements: Product
specifications/characteristics/technical
standards2)
(c) in installations for the
transport / distribution / storage
of water not intended for
human consumption and for
heating systems, insofar as they
are subject to an energy saving
requirement
(product group 7/8)
3.5 Assemblies (piping and supply
systems), pipes, tanks, valves,
taps, pumps, water meters,
protective and safety
equipment, fittings, adhesives,
joints, joint seals and gaskets,
membranes, coatings,
lubricants, lubricants in
transport installations /
distribution / supply of water
intended for human
consumption up to taps at
consumers and including taps
(only plastic, fiberglass and
metal tanks, pipes, fittings and
their assemblies of steel and
cast iron)
(product group 7/9)
Government
Regulation
No.163/2002 Coll.
§5
TN 07_09_09
TN 07_09_10
TN 07_09_12
TN 07_09_13
TN 07_09_14
3.6 Pipe assemblies, pipes, tanks,
escape alarm systems and
overfill prevention devices,
fittings, adhesives, joints and
gaskets, pipes, support
structures for pipes and pipes,
safety accessories (only pipes,
fittings and their assemblies of
steel)
(a) in gas / fuel transport /
distribution / storage
installations intended to supply
the heating / cooling systems of
buildings from an outdoor
storage tank or the last network
control device to enter the
building's heating / cooling
systems
Government
Regulation
No.163/2002 Coll.
§5a, §7
TN 07_10_05_b_c
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 13 of 18
Ordinal
number1 Product/Product group name
Conformity assessment
procedure/module
Basic requirements: Product
specifications/characteristics/technical
standards2)
(b) in installations subject to
fire resistance requirements,
used for the transport /
distribution / storage of gas /
fuel intended to supply heating
/ cooling systems of buildings
from an outdoor storage tank or
the last network control device
to enter the building heating /
cooling systems
(c) in installations subject to
reaction to fire requirements,
used for the transport /
distribution / storage of gas /
fuel intended to supply heating
/ cooling systems of buildings
from an outdoor storage tank or
the last network control device
to enter the building heating /
cooling systems
(product group 7/10)
3.7 Door frames
(product group 8/5)
Government
Regulation
No.163/2002 Coll.
§7
TN 08_05_01
3.8 Road equipment
d) Road restraint systems - eg
crash barriers, bridge rails
(except concrete)
(product group 9/5)
Government
Regulation
No.163/2002 Coll.
§5a
TN 09_05_03_d
3.9 Installations for the preparation
of hot water and central
heating, excluding installations
firing gaseous fuels, heat
pumps
(only storage water heaters
except solid fuel, heat
exchangers and exchanger
stations, electric instantaneous
heaters, electric radiators,
electric boilers, heat pumps,
storage tanks)
(product group 10/5)
Government
Regulation
No.163/2002 Coll.
§7
TN 10_05_03
TN 10_05_07
TN 10_05_10
TN 10_05_11
TN 10_05_14
TN 10_05_15
TN 10_05_16
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 14 of 18
Ordinal
number1 Product/Product group name
Conformity assessment
procedure/module
Basic requirements: Product
specifications/characteristics/technical
standards2)
3.10 Refrigeration, air-conditioning
and ventilation equipment, air-
conditioning units (excluding
heat recovery, refrigeration and
freezing equipment)
(product group 10/8)
Government
Regulation
No.163/2002 Coll.
§7
TN 10_08_01
TN 10_08_02
TN 10_08_03
TN 10_08_04
TN 10_08_10
TN 10_08_11
TN 10_08_12
TN 10_08_13
TN 10_08_14
3.11 Distribution systems of air-
handling and air-conditioning
equipment
(b) for applications not subject
to fire safety requirements
(product group 10/9)
Government
Regulation
No.163/2002 Coll.
§8
TN 10_09_01_b
TN 10_09_02_b
3.12 Tanks and reservoirs (of a
capacity exceeding 300 litres)
for the storage of
environmentally hazardous
substances other than tanks and
containers for gases (excluding
concrete)
(product group 10/12)
Government
Regulation
No.163/2002 Coll.
§5a
TN 10_12_01
TN 10_12_03
TN 10_12_04
TN 10_12_05
3.13 Electrical cables, household
outlets and plugs (excluding
cables)
(product group 10/13)
Government
Regulation
No.163/2002 Coll.
§7
TN 10_13_01
4. Construction products to Government Regulation No. 305/2011
4.1 DOORS, WINDOWS, SHUTTERS, GATES AND RELATED BUILDING HARDWARE
4.1.1 Doors and gates (with or without
related hardware)
For the reported specific uses
and / or uses subject to other
specific requirements, in
particular noise, energy,
tightness and safety in use (NO
for fire / smoke
compartmentation and NO for
escape routes)
(according to CD 1999/93 / EC
as amended by CD 2011/246 /
Regulation (EU) No.
305/2011, System 3
ČSN EN 13241+A2
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 15 of 18
Ordinal
number1 Product/Product group name
Conformity assessment
procedure/module
Basic requirements: Product
specifications/characteristics/technical
standards2)
EC)
4.2 COMMUNICATION EQUIPMENT: ROAD EQUIPMENT
4.2.1 Masts for road lighting for
communications
(according to CD 96/579 / EC
as amended by CD 1999/453 /
EC)
Regulation (EU)
No.305/2011, System
1
ČSN EN 40-5
ČSN EN 40-6
4.3 WASTE WATER ENGINEERING PRODUCTS
4.3.1 Kits for waste water pumping
station and effluent lifting
plants
For all essential characteristics
except reaction to fire
(according to CD 2015/1959)
Regulation (EU)
No.305/2011, System
3
ČSN EN 12050-1
ČSN EN 12050-2
ČSN EN 12050-3
ČSN EN 12050-4
4.3.2 Septic tanks
Kits and elements for waste
water treatment plants and on-
site treatment equipment
For all essential characteristics
except reaction to fire
(according to CD 2015/1959)
Regulation (EU)
No.305/2011, System
3
ČSN EN 12566-1+A1
ČSN EN 12566-3+A2 z: Z2
ČSN EN 12566-6 z: Z2
ČSN EN 12566-7 z: Z2
4.3.3 Prefabricated drainage
channels.
For all essential characteristics
except reaction to fire
(according to CD 2015/1959)
Regulation (EU)
No.305/2011, System
3
ČSN EN 1433 , ch. A1 outside Art.
6.3.3, 6.3.4, 6.3.5
4.4 ROOF COVERS, ROOFLIGHTS, ROOF WINDOWS AND ANCILLARY PRODUCTS
4.4.1 Walkways and footholds, roof
safety hooks and anchorages
For the applications to which
they apply regulations on
performance indicators fire
from outside
For uses other than those
specified in groups (1/6), (2/6),
(3/6), (4/6), (5/6)
(according to CD 98/436/EC as
amended by CD 2001/596/EC)
Regulation (EU)
No.305/2011, System
3
ČSN EN 12951
4.5 STRUCTURAL METALLIC PRODUCTS AND ANCILLARIES
4.5.1 Structural metallic Regulation (EU) ČSN EN 10025-1
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 16 of 18
Ordinal
number1 Product/Product group name
Conformity assessment
procedure/module
Basic requirements: Product
specifications/characteristics/technical
standards2)
sections/profiles
Hot rolled, cold molded or
otherwise manufactured
cross-sections / profiles of
various shapes (T, L, H, U, Z,
I, groove profiles, angles,
closed profiles, tubes), flat
products (sheets, thin sheets,
strips), bars, castings, forgings
made of various metal
materials, unprotected or
protected against corrosion
coatings.
For use in metal structures or
in composite metal and
concrete structures.
(according to CD 98/214/EC as
amended by CD 2001/596/EC)
No.305/2011, System
2+
ČSN EN 10088-4
ČSN EN 10088-5
ČSN EN 10340
ČSN EN 10210-1
ČSN EN 10219-1
ČSN EN 15088
4.5.2 Structural metal building parts.
Finished metallic products such
as trusses, girders, columns,
stairs, ground piles, bearing
piles and sheet piling, cut to
size sections designed for
certain applications, and rails
and sleepers.
They may be unprotected or
protected against corrosion,
welded or non-welded.
For use in frame constructions
and building foundations
(according to CD 98/214/ EC
as amended by CD
2001/596/EC)
Regulation (EU)
No.305/2011, System
2+
ČSN EN 1090-1+A1
4.6 PIPES, TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED
FOR HUMAN CONSUMPTION
4.6.1 Pipes
in installations for the
transport/distribution/storage of
gas/fuel intended for the supply
of building heating/ cooling
systems, from the external
storage reservoir or the last
Regulation (EU)
No.305/2011, System
3
ČSN EN 10255+A1
ČSN EN 1057+A1
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 17 of 18
Ordinal
number1 Product/Product group name
Conformity assessment
procedure/module
Basic requirements: Product
specifications/characteristics/technical
standards2)
pressure reduction unit of the
network to the inlet of the
heating/ cooling systems of the
building
(according to CD 1999/472/EC
as amended by CD
2001/596/EC)
4.6.2 Tanks
in installations for the
transport/distribution/storage of
gas/fuel intended for the supply
of building heating/ cooling
systems, from the external
storage reservoir or the last
pressure reduction unit of the
network to the inlet of the
heating/ cooling systems of the
building
(according to RK 1999/472/EC
as amended by RK
2001/596/EC)
Regulation (EU)
No.305/2011, System
3
ČSN EN 12285-2
4.6.3 Tanks
in installations in areas subject
to resistance to fire regulations,
used for the transport/
distribution/storage of gas/fuel
intended for the supply of
building heating/cooling
systems, from the external
storage reservoir or the last
pressure reduction unit of the
network to the inlet of the
heating/ cooling systems of the
building
(according to CD 1999/472 /
EC as amended by CD
2001/596 / EC)
Regulation (EU)
No.305/2011, System
1
ČSN EN 12285-2
4.6.4 Pipes
in installations in areas on
which are subject to fire
reaction regulations used for
transport / distribution / storage
gas / fuel intended for
Regulation (EU)
No.305/2011, System
1
ČSN EN 1057+A1
The Appendix is an integral part of
Certificate of Accreditation No. 212/2020 of 31/03/2020
Accredited entity according to ČSN EN ISO/IEC 17065:2013:
TÜV SÜD Czech s.r.o. Product Certification Body
Novodvorská 994, 142 21 Praha 4
Page 18 of 18
Ordinal
number1 Product/Product group name
Conformity assessment
procedure/module
Basic requirements: Product
specifications/characteristics/technical
standards2)
supplying systems for heating /
cooling buildings from an
outdoor storage tank or the last
network pressure control
station to enter heating/cooling
systems buildings. (according
to RK 1999/472/EC as
amended by RK 2001/596/EC)
1) Asterisk at the ordinal number identifies that within the scope of accreditation, the certification body is allowed to include
new/updated/revised technical specifications listed in the relevant conformity assessment procedure for the assessment of
conformity with safety requirements. The precondition is that the product area, regulations and conformity assessment
procedure must not change. Updated list of normative documents provided within the scope of accreditation is available
at the Certification Body (from the Certification Body Manager). 2) Current list of standards/normative documents is available from the Certification Body at Certification Body Manager or
on the website of the Certification Body.
Explanations and abbreviations:
CPR - Construction Products Regulation (Regulation (EU) No. 305/2011 of the European Parliament
and of the Council of 9 March 2011, laying down harmonized conditions for the marketing of
construction products and repealing Council Directive 89/106/EEC)
NZS - New Zealand Standard
ANSI - American National Standards Institute