A R C T I C C H I L L E R G R O U P
Arctic Boost Option
Manufacturer of Premium Efficiency Cooling SolutionsThe Arctic Chiller Group
PRODUCT RELEASE
• Available for both air-cooled and water-cooled units
• Previouslyunseencompressorefficiencies
• Allows compressor to run down to a 1.1 pressure ratio
• Suitable for higher leaving chilled water temperatures as in data center or chilled beam applications
• Refrigerant pump ensures proper compressor motor cooling during low lift operation
• Eliminates the need for a water-side economizer and all of the associated space, control points, and unstable loop temperatures associated with one
• No switchover procedure is required
• Zero maintenance required on the system
• Can replace the integral free-cooling coil optional on air-cooled chillers
Allows wider range of application including higher chilled water temps, lower condensing temps, and better continuous unloading.
120
100
80
60
40
SDT ˚F
SST ˚F 30 35 40 45 50 55 60 65 70
Low Lift comp Map
Low Lift zone
Standard map
1.1 Pr
1.5 Pr
Water-cooled unit Air-cooled unit with high leaving water temperature
Low lift option extends the compressor operating envelope
2019
F INAL IST
United States Canada71 Industrial Park Road 2100 Steeles Avenue EastNewberry, SC 29108 Brampton, ON L6T 1A7(803) 321-1891 (905) 789-9988Toll Free: (800) 849-7778 Toll Free: (800) 339-8982Fax: (803) 321-1898 Fax: (905) 789-9989
Visit our website at www.arcticchillergroup.com
PR-100-1905
The Arctic Chiller Group
NowPossible:Improvedultra-highefficienciesshownatlowloadpointsandvariousfallingcondensingtemperatures
Refrigerant pump on the motor-cooling line ensures the proper operation of the compressor as it runs in the low lift area of the operating envelope.
Typical water side economizerArctic Boost liquid pump
versus