16
Jensen Global's mission is to assist in your manufacturing process by providingthe most extensive selection of dispensing production supplies and solutionswith the highest level of service and support.
We offer products and application solutions based on specific requirements. Ourcommitment is to supply equipment and supplies to increase manufacturing andassembly productivity while reducing associated costs. In addition to stockconsumables, we have the ability to manufacture custom tips and products formany unique applications.
As an industry leader in dispensing, we have over 200 different combinations ofneedles and syringes available for the electronics, ink jet, dental, aerospace,industrial and medical manufacturing markets.
Jensen Global, Inc's headquarters and warehouse are located in downtown SantaBarbara, California. We have an extensive distribution and sales representationnetwork throughout North America, Europe and Asia.
Visit our website for more information: www.jensenglobal.com or contact our sales technicians: [email protected]
Tel (805) 965-3668 Fax (805) 456-2039
Table of Contents
Needles and Tip Caps
1
Syringes
Equipment
Accessories
IT Series, Custom Length, 45o & 90o Bent Needles
Tapered, Teflon®, Peek™, & Oval Needles
NT Series & All Metal Reusable Needles
Air Syringes
Manual Syringes
Syringe Specifications
Controllers (Foot Valves & Shot Meters)
Valves & Wands
Systems, Pressure Tanks & Epoxy Guns
Positive / Linear Displacement Syringe Systems
...................................................................................... 2-4
...........................................................
5-7
8-11
.................................................................................................................
............................................................................................................
...........................................................................................................
...........................................................................................................
.......................................................................
..........................................................................
...................................................................................................
..........................................................................
...........................................................................................................
..........................................................................
3
2
5
4
7
6
9
8
10
11...............................................................
Teflon® is a registered trademark of DuPontPEEK™ is a trademark of Victrex PLC
Flux and Multi-Purpose Bottles
Finger Switch
Needle & Syringe Kits
...............................................................................................................
.......................................................................................
.................................................................................................
12
12
12
12-13
Cartridges & Nozzles
Fittings & Tubing
Static Mixers
.....................................................................................................
.................................................................................................................
...........................................................................................................
13
13
13
Syringe Adapters .......................................................................................................... 7
Syringe Tip Caps & End Caps ......................................................................................... 7
.................................................................................................................
Scabbards & Needle Covers 4............................................................................................
IT Series 45o & 90o angled needles are bent with a smooth radius, 1/4" from the dispensing tip.
www.jensenglobal.com
Nee
dles
Jensen Global provides the most extensive needle selection available. Alldisposable needles use a threaded hub design made of polypropyleneand are bonded using UV adhesive for strength.
IT Series needles are color coded based on the international standard and are made with polypropylene luer
IT Series Custom length needles are available in stock 5/16", 6/16", 2", and 3". Other lengths available.
Bulk (1K)JG14-0.5JG15-0.5JG16-0.5JG17-0.5JG18-0.5JG19-0.5JG20-0.5JG21-0.5JG22-0.5JG23-0.5JG24-0.5JG25-0.5JG26-0.5JG27-0.5JG30-0.5
1/2 inch needles 1.5 inch needles1 inch needlesGauge141516171819202122232425262730
Bag (50)JG14-0.5XJG15-0.5XJG16-0.5XJG17-0.5XJG18-0.5XJG19-0.5XJG20-0.5XJG21-0.5XJG22-0.5XJG23-0.5XJG24-0.5XJG25-0.5XJG26-0.5XJG27-0.5XJG30-0.5X
Custom bend location and varying degree bends are available upon special request.
Gauge15182022252730
1/2 inch needles 1.5 inch needles1 inch needlesBag (50)JG15-0.5X-*JG18-0.5X-*JG20-0.5X-*JG22-0.5X-*JG25-0.5X-*JG27-0.5X-*JG30-0.5X-*
Bag (50) -JG18-1.5X-*JG20-1.5X-*JG22-1.5X-*JG25-1.5X-*JG27-1.5X-* -
Bag (50) -JG18-1.0X-*JG20-1.0X-*JG22-1.0X-*JG25-1.0X-*JG27-1.0X-* -
Bulk (1K)JG15-0.5-*JG18-0.5-*JG20-0.5-*JG22-0.5-*JG25-0.5-*JG27-0.5-*JG30-0.5-*
Bulk (1K) -JG18-1.5-*JG20-1.5-*JG22-1.5-*JG25-1.5-*JG27-1.5-* -
Bulk (1K) -JG18-1.0-*JG20-1.0-*JG22-1.0-*JG25-1.0-*JG27-1.0-* -
Gauge1416182022252730
Bag (50)JG14-2.0XJG16-2.0XJG18-2.0XJG20-2.0XJG22-2.0X - - -
5/16 inch needles 6/16 inch needles 2 inch needles 3 inch needlesBulk (1K)JG14-2.0JG16-2.0JG18-2.0JG20-2.0JG22-2.0 - - -
Bag (50)JG14-3.0XJG16-3.0XJG18-3.0XJG20-3.0XJG22-3.0X - - -
Bulk (1K)JG14-3.0JG16-3.0JG18-3.0JG20-3.0JG22-3.0 - - -
Box (50) - -JG18-516PJG20-516P - -JG27-516PJG30-516P
Bulk (1K) - -JG18-516JG20-516 - -JG27-516JG30-516
Bag (50) - -JG18-0.375XJG20-0.375XJG22-0.375XJG25-0.375X - -
Bulk (1K) - -JG18-0.375JG20-0.375JG22-0.375JG25-0.375 - -
IT Series, Custom and 45o & 90o Needle SpecificationsColorOliveOrangePurpleWhitePinkBrownYellowGreenBlackLight BlueRedBlueCreamTanLavender
Gauge141516171819202122232425262730
Inside DiameterIn mm
1.7531.4991.3461.2190.9650.8380.6350.5590.5080.4060.3810.3050.2790.2290.152
0.0690.0590.0530.0480.0380.0330.0250.0220.0200.0160.0150.0120.0110.0090.006
0.0830.0720.0650.0580.0490.0430.0360.0330.0280.0250.0220.0200.0190.0160.012
2.1081.8291.6511.4731.2451.0920.9140.8380.7110.6350.5590.5080.4830.4060.305
Outside DiameterIn mm
Orders for in stock needles received by2pm PST ship the same day
Box (50)JG14-0.5PJG15-0.5PJG16-0.5PJG17-0.5PJG18-0.5PJG19-0.5PJG20-0.5PJG21-0.5PJG22-0.5PJG23-0.5PJG24-0.5PJG25-0.5PJG26-0.5PJG27-0.5PJG30-0.5P
Bulk (1K)JG14-1.5JG15-1.5JG16-1.5JG17-1.5JG18-1.5JG19-1.5JG20-1.5JG21-1.5JG22-1.5JG23-1.5JG24-1.5JG25-1.5JG26-1.5JG27-1.5 -
Bag (50)JG14-1.5XJG15-1.5XJG16-1.5XJG17-1.5XJG18-1.5XJG19-1.5XJG20-1.5XJG21-1.5XJG22-1.5XJG23-1.5XJG24-1.5XJG25-1.5XJG26-1.5XJG27-1.5X -
Box (50)JG14-1.5PJG15-1.5PJG16-1.5PJG17-1.5PJG18-1.5PJG19-1.5PJG20-1.5PJG21-1.5PJG22-1.5PJG23-1.5PJG24-1.5PJG25-1.5PJG26-1.5PJG27-1.5P -
Bulk (1K)JG14-1.0JG15-1.0JG16-1.0JG17-1.0JG18-1.0JG19-1.0JG20-1.0JG21-1.0JG22-1.0JG23-1.0JG24-1.0JG25-1.0JG26-1.0JG27-1.0JG30-1.0
Bag (50)JG14-1.0XJG15-1.0XJG16-1.0XJG17-1.0XJG18-1.0XJG19-1.0XJG20-1.0XJG21-1.0XJG22-1.0XJG23-1.0XJG24-1.0XJG25-1.0XJG26-1.0XJG27-1.0XJG30-1.0X
Box (50)JG14-1.0PJG15-1.0PJG16-1.0PJG17-1.0PJG18-1.0PJG19-1.0PJG20-1.0PJG21-1.0PJG22-1.0PJG23-1.0PJG24-1.0PJG25-1.0PJG26-1.0PJG27-1.0PJG30-1.0P
Bag (50) - -JG18-516XJG20-516X - -JG27-516XJG30-516X
* Insert degree bend (45 or 90) in place of asterik: example (JG18-0.5X-45 or JG20-1.5-90).
Box (50)JG15-0.5P-*JG18-0.5P-*JG20-0.5P-*JG22-0.5P-*JG25-0.5P-*JG27-0.5P-*JG30-0.5P-*
Box (50) -JG18-1.0P-*JG20-1.0P-*JG22-1.0P-*JG25-1.0P-*JG27-1.0P-* -
Box (50) -JG18-1.5P-*JG20-1.5P-*JG22-1.5P-*JG25-1.5P-*JG27-1.5P-* -
2
lock hubs with 304 stainless steel tubing. They are bonded with a clear UV adhesive for exceptional strength. Theluer lock utilizes an outside thread design for secure locking onto a syringe or valve.
Packaging options include clear bags of50, special ESD-safe (conductive) boxesof 50, or bulk bags of 1000 needles.
3
Nee
dles
Gauge141618202224
Tapered needles are made of polypropylene, reduce material back pressure, offer scratch free dispensing,
Peek™ needles offer material compatability similar to Teflon® yet are more rigid for accurate material
Teflon® needles are made with flexible Teflon® tubing, bonded with UV adhesive, and have an outside luer
2 inch teflonGauge1416182022232430
Bag (50)JG14-0.5TXJG16-0.5TXJG18-0.5TXJG20-0.5TXJG22-0.5TXJG23-0.5TXJG24-0.5TXJG30-0.5TX
Bulk (1K)JG14-0.5TJG16-0.5TJG18-0.5TJG20-0.5TJG22-0.5TJG23-0.5TJG24-0.5TJG30-0.5T
Bag (50)JG14-2.0TXJG16-2.0TXJG18-2.0TXJG20-2.0TXJG22-2.0TX - - -
Bulk (1K)JG14-2.0TJG16-2.0TJG18-2.0TJG20-2.0TJG22-2.0T - - -
1/2 inch teflon
2 inch peek
Gauge141830
Bag (50)JG14-0.5PKXJG18-0.5PKXJG30-0.5PKX
Bulk (1K)JG14-0.5PKJG18-0.5PKJG30-0.5PK
Bag (50)JG14-2.0PKXJG18-2.0PKX
Bulk (1K)JG14-2.0PKJG18-2.0PK
1/2 inch peek
Ga1416182022232430
Tapered Specifications
A variation to the IT & NT Series (stainless steel tube) needles,Tapered, Teflon® and Peek™ needles offer excellent compatabilitywith many adhesives and materials that are difficult to dispense.
Teflon® Specifications
ColorOlivePurplePinkYellowBlackLight BlueRedLavender
Inside Diam.In mm
1.6761.3461.0670.8640.7110.6600.5590.305
0.0660.0530.0420.0340.0280.0260.0220.012
0.0820.0650.0540.0460.0400.0380.0340.024
2.0831.6511.3721.1681.0160.9650.8640.610
Outside Diam.In mmGa
141618202224
ColorSalmon/orangeGreyGreenPinkBlueRed
Inside Diam.In mm
1.7531.4991.3461.2190.9650.838
0.0690.0590.0530.0480.0380.033
Length1.25"1.25"1.25"1.25"1.25"1.25"
Ga141830
Peek™ Specifications
ColorOlivePinkLavender
Inside Diam.In mm
1.6761.0670.305
0.0660.0420.012
***
***
Outside Diam.In mm
Oval needles produce a flat deposit of thick materials such as pastes and sealants for specialty applications.
Gauge151820
Orders for in stock needles received by2pm PST ship the same day
Bag (50)JG14-1.25TTXJG16-1.25TTXJG18-1.25TTXJG20-1.25TTXJG22-1.25TTXJG24-1.25TTX
Bulk (1K)JG14-1.25TTJG16-1.25TTJG18-1.25TTJG20-1.25TTJG22-1.25TTJG24-1.25TT
1.25 Inch taperedBox (50)JG14-1.25TTPJG16-1.25TTPJG18-1.25TTPJG20-1.25TTPJG22-1.25TTPJG24-1.25TTP
Box (50)JG14-0.5TPJG16-0.5TPJG18-0.5TPJG20-0.5TPJG22-0.5TPJG23-0.5TPJG24-0.5TPJG30-0.5TP
Bag (50)JG15-0.5VXJG18-0.5VXJG20-0.5VX
Box (50)JG15-0.5VPJG18-0.5VPJG20-0.5VP
Bulk (1K)JG15-0.5VJG18-0.5VJG20-0.5V
Box (50)JG14-0.5PKPJG18-0.5PKPJG30-0.5PKP
1/2 inch oval
Teflon® is a registered trademark of DuPontPEEK™ is a trademark of Victrex PLC
* see www.jensenglobal.com for further specifications
Gauge1418
and are 1.25" in length. Hub connections are a luer lock with an outside thread design.
hub. They offer scratch-free dispensing and are excellent with cyanoacrylates and anaerobics.
placement.
Box (50) - -
Nee
dles
NT Series needles are manufactured with polished 304 stainless steel and are cut burr-free. They have
1/2" needlesJG05M-0.5DJG06M-0.5DJG07M-0.5DJG08M-0.5DJG09M-0.5DJG10M-0.5DJG11M-0.5DJG12M-0.5DJG13M-0.5DJG14M-0.5DJG15M-0.5DJG16M-0.5DJG17M-0.5DJG18M-0.5DJG19M-0.5DJG20M-0.5DJG21M-0.5DJG22M-0.5DJG23M-0.5DJG24M-0.5DJG25M-0.5DJG26M-0.5DJG27M-0.5DJG30M-0.5D
1" needlesJG05M-1.0DJG06M-1.0DJG07M-1.0DJG08M-1.0DJG09M-1.0DJG10M-1.0DJG11M-1.0DJG12M-1.0DJG13M-1.0DJG14M-1.0DJG15M-1.0DJG16M-1.0DJG17M-1.0DJG18M-1.0DJG19M-1.0DJG20M-1.0DJG21M-1.0DJG22M-1.0DJG23M-1.0DJG24M-1.0DJG25M-1.0DJG26M-1.0DJG27M-1.0D
1.5" needlesJG05M-1.5DJG06M-1.5DJG07M-1.5DJG08M-1.5DJG09M-1.5DJG10M-1.5DJG11M-1.5DJG12M-1.5DJG13M-1.5DJG14M-1.5DJG15M-1.5DJG16M-1.5DJG17M-1.5DJG18M-1.5DJG19M-1.5DJG20M-1.5DJG21M-1.5DJG22M-1.5DJG23M-1.5DJG24M-1.5DJG25M-1.5DJG26M-1.5DJG27M-1.5D -
2" needlesJG05M-2.0DJG06M-2.0DJG07M-2.0DJG08M-2.0DJG09M-2.0DJG10M-2.0DJG11M-2.0DJG12M-2.0DJG13M-2.0DJG14M-2.0DJG15M-2.0DJG16M-2.0DJG17M-2.0DJG18M-2.0DJG19M-2.0DJG20M-2.0DJG21M-2.0DJG22M-2.0DJG23M-2.0DJG24M-2.0DJG25M-2.0DJG26M-2.0DJG27M-2.0D -
All Metal, Reusable needles are made with a chrome plated hub and 304 stainless tubing. Sold in bags
Gauge050607080910111213141516171819202122232425262730
1/2 inch needlesBag (50)JG14-0.5HPXJG15-0.5HPXJG16-0.5HPXJG18-0.5HPXJG19-0.5HPXJG20-0.5HPXJG21-0.5HPXJG22-0.5HPXJG23-0.5HPXJG25-0.5HPXJG27-0.5HPXJG30-0.5HPX
Bulk (1000)JG14-0.5HPJG15-0.5HPJG16-0.5HPJG18-0.5HPJG19-0.5HPJG20-0.5HPJG21-0.5HPJG22-0.5HPJG23-0.5HPJG25-0.5HPJG27-0.5HPJG30-0.5HP
Bulk (1000)JG14-1.5HPJG15-1.5HPJG16-1.5HPJG18-1.5HPJG19-1.5HPJG20-1.5HPJG21-1.5HPJG22-1.5HPJG23-1.5HPJG25-1.5HPJG27-1.5HP -
Bag (50)JG14-1.5HPXJG15-1.5HPXJG16-1.5HPXJG18-1.5HPXJG19-1.5HPXJG20-1.5HPXJG21-1.5HPXJG22-1.5HPXJG23-1.5HPXJG25-1.5HPXJG27-1.5HPX -
Bag (50)JG14-1.0HPXJG15-1.0HPXJG16-1.0HPXJG18-1.0HPXJG19-1.0HPXJG20-1.0HPXJG21-1.0HPXJG22-1.0HPXJG23-1.0HPXJG25-1.0HPXJG27-1.0HPX -
Bulk (1000)JG14-1.0HPJG15-1.0HPJG16-1.0HPJG18-1.0HPJG19-1.0HPJG20-1.0HPJG21-1.0HPJG22-1.0HPJG23-1.0HPJG25-1.0HPJG27-1.0HP -
1.5 inch needles1 inch needlesGauge141516181920212223252730
Metal Specifications
OD In ODmm
-
www.jensenglobal.com4
NT Series Specifications
ID In IDmm4.8014.3943.8103.4292.9972.6922.3882.1591.8031.6001.3721.1941.0670.8380.6860.5970.5080.4060.3300.3050.2540.2540.2030.152
0.1890.1730.1500.1350.1180.1060.0940.0850.0710.0630.0540.0470.0420.0330.0270.0240.0200.0160.0130.0120.0100.0100.0080.006
0.2190.2030.1800.1650.1480.1340.1200.1090.0950.0830.0720.0650.0580.0500.0420.0360.0320.0280.0250.0220.0200.0180.0160.012
5.5635.1564.4574.1913.7593.4043.0482.7692.4132.1081.8291.6511.4731.2701.0670.9020.8130.7110.6350.5590.5080.4570.4060.305
OD In ODmm
Gauge141516181920212223252730
ColorWhiteBrownCharcoalGreenLight GreenPinkPurpleBlueOrangeRedGreyLavender
ID In ID mm1.61.321.190.840.690.580.510.410.330.250.200.15
0.0630.0520.0470.0330.0270.0230.0200.0160.0130.0100.0080.006
0.0830.0720.0650.0500.0420.0360.0320.0280.0250.0200.0160.012
2.111.831.651.271.070.910.810.710.640.510.410.31
Scabbards (Needle Tip Caps) & Needle Covers protect dispensing needles when not
Gauge1416182022
Bag (50)JG14-SCXJG16-SCXJG18-SCXJG20-SCXJG22-SCX
Bulk (1000)JG14-SCJG16-SCJG18-SCJG20-SCJG22-SC
Bulk (1000)JGNCJGNC1.5
Needle covers
Scabbards
Bag (50)JGNCXJGNC1.5X
DescriptionNeedle Cover for 0.5" & 1.0" for IT & NT Series needlesNeedle Cover for 1.5" IT & NT Series needles
Description14 gauge for IT, NT & all tapered needles (14,16,18,20,22,24)16 gauge scabbard for IT & NT Series needles18 gauge scabbard for IT & NT Series needles20 gauge scabbard for IT & NT Series needles22 gauge scabbard for IT & NT Series needles
GaugeAll gaugesAll gauges
outside threaded hubs and are color coded using the national color standard.
of 12 needles. Made to order.
being used. Scabbards cover and seal just the tip to prevent drying or curing of material in the needle or syringe,whereas needle covers protect only the needle from bending and fit over part of the hub.
Size03cc05cc10cc30cc50cc
Luer Lock Syringe Barrels with Stoppers
Air Operated syringes consist of a heavy duty syringe barrel reser-
Case400018001500 600 500
Syringe Barrels are manufactured with a heavy flange, customdesigned for air dispensing and include grey plastic, drip-freestoppers (50cc is made of thermal rubber). Convenientlypackaged with barrels and stoppers in one bag.
Qty/bag 50 40 30 20 10
ClearJG3A-50JG5A-40JG10A-30JG30A-20JG50A-10
ClearJG3A-BLLJG5A-BLLJG10A-BLLJG30A-BLLJG50A-BLL
Black UVJG3A-50-UVBJG5A-40-UVBJG10A-30-UVBJG30A-20-UVB -
Yellow UVJG3A-50-UVAJG5A-40-UVAJG10A-30-UVAJG30A-20-UVA -
Luer Lock Syringe Barrels - Bulk
Size03cc05cc10cc30cc50cc
Black UVJG3A-BLL-UVBJG5A-BLL-UVBJG10A-BLL-UVBJG30A-BLL-UVB -
Yellow UVJG3A-BLL-UVAJG5A-BLL-UVAJG10A-BLL-UVAJG30A-BLL-UVA -
Syringe Barrels are manufactured with a heavy flange, customdesigned for air dispensing. (500 piece minimum or bulkcase quantity).
Case400018001500 600 500
GreyNo DripJG3A-GJG5A-GJG10A-GJG30A-G -
Syringe Air Stoppers - Bulk
Size03cc05cc10cc30cc50cc
BlueStraight WallJG3A-GBJG5A-GBJG10A-GBJG30A-GB -
WhiteRubberJG3A-GWJG5A-GWJG10A-GWJG30A-GWJG50A-GW
Syringe stoppers are specifically designed for air dispensing.Grey, drip-free standard stoppers are the most common, butalso available in straight wall (blue) for heavy materials, andwhite thermal rubber. (500 piece minimum or case quantity).
Case1500 350 800
Barrel &StopperJG6AT-40JG30AT-20JG50AT-10
Taper Tip Air Syringe Packages & Bulk
Size06cc30cc50cc
BarrelJG6T-1JG30T-1JG50T-1
StopperJG6T-2AJG30T-2AJG50A-GW
Taper tip syringes are a one piece molded barrel which have atapered nozzle tip and use a black rubber stopper. The taperedtip can be cut back for more material flow. Pre-packed inconvenient bags or sold in bulk (500 piece minimum or casequantity).
Qty/bag 40 20 10
Bulk ComponentsPre-packaged Bags
Syrin
ges
Orders for in stock syringes receivedby 2pm PST ship the same day
* Add a B at the end of any barrel/stopper package above for high viscosity straight wall stopper; add a W on the end for white thermal rubber stopper
5
voir plus a stopper, which is available in a grey plastic drip-free design,a straight wall high viscosity blue stopper, or a thermal rubber whitestopper. These syringes are sold in convenient pre-packed bags or ineconomical bulk cases.
Syrin
ges
Orders for in stock syringes receivedby 2pm PST ship the same day
Manual syringes consist of barrel, stopper, and plunger for manual
Unassembled Silicone-Free Non-Calibrated
Assembled Calibrated Manual Syringes
LS (1000)JG1CCLSJG3CCLSJG5CCLSJG10CCLSJG20CCLSJG30CCLSJG50CCLS
Clear Luer LockJGM3LL-SFJGM5LL-SFJGM10LL-SFJGM30LL-SF
Size01cc03cc05cc10cc20cc30cc50cc
Qty/bag 200 100 50 25 20 10 5
Luer Lock (LL) -JG3CCLL-100JG5CCLL-50JG10CCLL-25JG20CCLL-20JG30CCLL-10JG50CCLL-5
LL (1000) -JG3CCLLJG5CCLLJG10CCLLJG20CCLLJG30CCLLJG50CCLL
Size03cc05cc10cc20cc30cc
Qty/bag 20 20 15 10 10
PlungerJG3-PJG5-PJG10-PJG20-PJG30-P
LL BarrelJG3-BLLCJG5-BLLCJG10-BLLCJG20-BLLCJG30-BLLC
StopperJG3-GJG5-GJG10-GJG20-GJG30-G
Luer Lock (LL)JGM3LL-20JGM5LL-20JGM10LL-15JGM20LL-10JGM30LL-10
Prepackaged BagsIncludes Barrel, Stopper & Plunger
Bulk Components1000 piece minimum
Size06cc10cc30cc50cc
Qty/bag 20 15 20 5
PlungerJG5M-PJG10M-PJG30M-PJG50M-P
T BarrelJG6T-1JG10T-1JG30T-1JG50T-1
StopperJG5M-SJG10M-SJG30M-SJG50M-S
Taper Tip (T)JG6MT-20JG10MT-15JG30MT-20JG50MT-5
Prepackaged Bags Bulk Components
Luer Lock
Taper Tip
Size03cc05cc10cc30cc
Black UV LLJGM3LLUVB-SFJGM5LLUVB-SFJGM10LLUVB-SFJGM30LLUVB-SF
These luer lock syringe packages offer silicone free dispensing. Thestoppers are not lubricated, yet slide effortlessly inside the barrel.Each bag includes barrels, rubber stoppers, and plungers.
Yellow UV LLJGM3LLUVA-SFJGM5LLUVA-SFJGM10LLUVA-SFJGM30LLUVA-SF
Qty/bag 20 20 15 10
Luer lock syringes come unassembled without any calibrations andare sold in packages or bulk. Offered in luer lock style only.
Fully assembled and calibrated syringes are available inconvenient packages or bulk. Offered in luer slip or the morepopular luer lock style, both accepting all dispensing needles.
Luer Slip (LS)JG1CCLS-200JG3CCLS-100JG5CCLS-50JG10CCLS-25JG20CCLS-20JG30CCLS-10JG50CCLS-5
Unassembled Non-Calibrated Manual Syringes
www.jensenglobal.com6
deposit of materials. Options include fully assembled syringes, cali-brated or plain syringe barrels, silicone free stoppers, luer lock, luerslip, taper tip, and come pre-packaged or in bulk.
Syrin
ges
Syringe Specifications
.372
.497
.636
.886
2.912.733.574.65
0.4540.5830.7371.002
1.2351.2521.3281.742
OD(C)
allows pressurization of a syringe to dispense a metered amount of material ergonomically and with precision.
Standard Adapters are economical and specifically designed with an o-ring seal to fitall Jensen Global air syringes and some other manufacturers seal. Tubing OD: 1/4"
7
JG3A-XJG5A-XJG10A-XJG30A-XJG50A-X
3cc adapter, hose and quick connect5cc adapter, hose and quick connect10cc adapter, hose and quick connect30cc adapter, hose and quick connect50cc adapter, hose and quick connect
JG3CCUSAJG5CCUSAJG10CCUSAJG30CCUSA
3cc adapter, 6 ft hose and quick connect5cc adapter, 6 ft hose and quick connect10cc adapter, 6 ft hose and quick connect30cc adapter, 6 ft hose and quick connect
ID(B)
Length (A)
Flange (D)
Catalog Page
55
.507
.8953.5755.152
0.5831.020
1.2121.742
OD(C)
ID(B)
Length (A)
Flange (D)
AirSyringe
06cc30cc
Air Syringe
03cc05cc10cc30cc
Catalog Page
5555
.372
.478
.579
.776
.891
.183
.372
.478
.579
2.6522.9833.8304.2704.8253.1642.7433.0793.871
0.4680.5530.6610.8741.0050.2690.4680.5530.661
0.8481.0581.1571.5301.6610.7580.8481.0581.157
OD(C)
ID(B)
Length (A)
Flange (D)
ManualSyringes
03cc05cc10cc20cc30cc01cc03cc05cc10cc
Catalog Page
666666666
Syringe TypeLuer LockLuer LockLuer LockLuer LockLuer LockLuer SlipLuer SlipLuer SlipLuer Slip
Syringe Type
Syringe Type
Luer LockLuer LockLuer LockLuer Lock
Taper TipTaper Tip
Same specifications for manual silicone free syringe barrels on page 6
Same specifications for manual taper tip syringe barrels on page 6
Same specifications for manual non-calibrated syringes on page 6
Universal Adapters are designed to fit Jensen Global air syringes, as well as manyother manufacturers' syringes, using a gasket seal. Tubing OD: 5/32"
Unique Delrin® 1cc Adapter is a custom made adapter for pre-filled 1cc syringesof frozen epoxies and other materials filled in a 1cc air syringe with the followingdimensions: ID (.22"); OD (.31"); Flange (.675"). Part # JG1CCUSA
Syringe Adapters are the connection between the syringe and dispensing equipment / shot meters. It
Syringe Tip Caps & End CapsThese caps are designed to keep material inside the syringe from curing. Luer lock tipcaps connect to all syringe tip in place of a needle, and come in black or clear. Red endcaps are size specific and fit Jensen Global air syringes.
Bulk (1K)JG-TCBJG-TCCJG3A-BLLECJG5A-BLLECJG10A-BLLECJG30A-BLLEC
DescriptionBlack LL tip capClear LL tip cap3cc air red end cap5cc air red end cap10cc air red end cap30cc air red end cap
Part #JG-TCBXJG-TCCXJG3A-BLLEC-50JG5A-BLLEC-40JG10A-BLLEC-30JG30A-BLLEC-20
505050403020
Qty
Delrin® is a registered trademark of DuPont
Part # Description
Part # DescriptionJG3A-X6JG5A-X6JG10A-X6JG30A-X6JG50A-X6
Part #3 ft hose3 ft hose3 ft hose3 ft hose3 ft hose
6 ft hose6 ft hose6 ft hose6 ft hose6 ft hose
Equi
pmen
t
JGDFV25 Pneumatic Foot Valve is a purely pneumatic valve
Dispensing Controls Pneumatic foot pedals and time-pressure controllers are used for
JGDFV25V Pneumatic Vacuum Foot Valve has all the
JGD300S Analog Syringe Shot Meter is a pneumatic yet
ERGONOMIC
ERGONOMIC
JGD500SMT SMT Dispensing Re-work Station
Specifications for Shot MetersPart #JGD300SJGD500SJGD500SMT
Weight2.4 lb2.1 lb2.1 lb
L x H x D4.5 x 6.25 x 7.754.5 x 6.25 x 7.754.5 x 6.25 x 7.75
Timer.01-30 sec.008-99.99 sec.008-99.99 sec
MaterialVacuumYesYesYes
Specifications for Foot ValvesPart #JGDFV25JGDFV25V
Weight3.2 lb3.2 lb
L x W x H6.75 x 3.8 x 3.756.75 x 3.8 x 3.75
Timern/an/a
MaterialVacuumn/aYes
AirInput1-100psi1-100psi
AirInput1-100psi1-100psi1-100psi www.jensenglobal.com
8
syringes or valve/tank dispensing. These controls provide excellent ergonomics, efficiency andaccuracy.
pedal that includes a built-in regulator and gauge to control the flow of material,and a simple step-to-activate design built inside a protective housing. Theback of the unit has a 1/4 inch female thread with a standard male quickconnect included. The foot pedal has a syringe adapter inlet port built-in to fitstandard 1/4" OD tubing plus a reducer adapter to accept 5/32 OD tubing.
features of the JGDFV25 plus a built-in vacuum venturi regulator which allowspull back of material into the needle, reducing dripping and stringing of thematerial.
electonicallycontrolled dispenser. The JGD300S is an economical dispenserthat still gives the operator time control, to reproduce an amount of material.The timer ranges from 00.01 to 30 seconds, with a vacuum pull back featureincluded. You can bypass the timer by dispensing in manual mode. Optionalfinger switch available.
incorporates every feature of the JGD500S, plus a vacuum pick up wand con-trolled by the JGD500SMT's built in flow regulator. The pick up tool connects tothe front of the dispenser, and the strength of the pick up vacuum is controlledby a miniature flow regulator knob specifically placed on the back panel. Sev-eral sizes of suction cups are included.
JGD500S Digital Syringe Shot Meter is a pneumatic yetelectronically controlled dispenser. This time-pressure system has 10 pro-gram memory storage and a timer range from 0.008 to 99.99 seconds. Inmanual INT mode, the timer counts up, giving you the ability to determine whattime you require with your application. Also included is sequential dispensing;ie: whatever programs are stored, the sequential dispensing cycles througheach program. Vacuum pull back is a standard feature included. Optionalfinger switch available.
Equi
pmen
t
Dispensing Valves
JGD-MPW Pinch WandA manual dispensing wand has a flexible silicone pinchtube and is excellent for solder masks and other flowablematerials which require 50 psi or less to dispense. Thepinch tube is easily replaced, therefore making cleanup easy and quick. The front of the wand has a luer lockfemale fitting, allowing use of any size dispensingneedle. Length (6.73") Diameter (.63")
JGD700D Diaphragm Valve JGD710N Needle Valve
JGD720HPS Spool Valve JGD740S Spray Valve
JGD301 Vacuum Pick Up WandThis advanced vacuum pick up wand has a built-in ven-turi right in the handle and connects directly to an airsource or the JGD200SMT dispenser. It is whisper-quiet,comes with two different angled tips, and three suctioncups. Length (5.25" w/o needle) Diameter (.48")
JGD200SVC Spray Valve ControllerThis advanced controller is designed specifically for theJGD740S spray valve, and controls pre-atomization andspraying of materials such as conformal coatings andmaterials up to 1000 cps. Visit www.jensenglobal.comfor pictures and further specifications.
The Diaphragm valve is designed to dis-pense low to medium viscosity materialsand is excellent for cyanoacrylates andanaerobics, UV adhesives and MEK. TheJGD200S can control the valve opening andthe valve's internal spring provides a cleanshut off of material. Length (3.1") Diameter(.936")
JGD730AV Auger Pump
The needle valve is excellent for a widerange of shot sizes and materials up to100,000cps. It can be operated with theJGD200S using the internal spring to closeit for low or medium viscosity materials. Forhigher viscosity materials, the JGD200Vuses air to open and close the valve. Typi-cal materials are adhesives, epoxies, sili-cones, inks and lubricants. Length (4.5")Diameter (1.0")
The spool valve is designed for high pres-sure applications and high viscosity materi-als up to 300,000 cps. It is spring closed forlow to medium viscosity materials, using theJGD200S controller. For heavier materials,use the JGD200V which allows for two wayair control. The rear action closing of thevalve creates a pull back action that preventsdripping. Suggested materials are RTV andsilicones, greases, and solder mask. Length(4.7") Diameter (1.5")
The spray valve is pneumatically actuatedand uses air pressure to dispense low tomedium viscosity materials, generally upto 1000 cps. Air pressure supplied to the aircap provides atomization and can be con-trolled by the JGD200SVC to initiate just be-fore material is dispensed. Spray outputcan be varied by the fine adjustment knobcontrolling needle stroke distance. Sug-gested materials include lubricants, sol-vents, inks, and conformal coatings. Length(4.2") Diameter (1.0")
The Auger pump is a positive displacementvalve excellent for solder paste, filled epoxies,underfill, and encapsulants. The valve has afeed screw, with various pitches available,which rotates and displaces the material.Viscosity range is from 50,000 to 500,000cps. It is designed to be integrated with anxyz table. Length (3.99") Overall Diameter(2.14") Valve Body Diameter (.904")
9
Equi
pmen
tSolder Mask Bulk Dispenser system is designed to accept 1 gallon of solder
Stainless Steel Pressure Tanks allow for material storage and dispensing. Each tank
Custom Pressure Tanks are designed around industry standard bottles of cyanoacrylates
Two-Part Epoxy Syringe Guns 50ml gun accepts a 1:1 ratio dual syringe cartridge (usually
Part #JGD1000-1JGD1000-2JGD1000-3JGD1000-4
Description1 gallon tank, one operator system1 gallon tank, two operator system, and material manifold1 gallon tank, three operator system,and material manifold1 gallon tank, four operator system, and material manifold
10
Part #JGD1GJGD2.5GJGD2.5GBPJGD5GJGD5GBP
Description1 gallon stainless steel pressure tank, top ported, with regulator & gauge2.5 gallon stainless steel pressure tank, top ported, with regulator & gauge2.5 gallon stainless steel pressure tank, bottom ported, with regulator & gauge5 gallon stainless steel pressure tank, top ported, with regulator & gauge5 gallon stainless steel pressure tank, bottom ported, with regulator & gauge
Part #JGD1LBMJGD1LTJGD2500
DescriptionMiniature safety cyanoacrylate tank1 liter tank for UV adhesive bottles2 gallon batch mixer tank with 1/2 horsepower motor,jiffy mixing blades, regulator & gauge
Part #JGD-104JGD-25-94
DescriptionManual 1:1 gun for 50ml dual epoxy syringe 25ml x 25mlPneumatic 1:1 gun for 50ml dual epoxy syringe 25ml x 25ml
mask (water soluable or peelable mask), and can be configured for 1, 2, 3 or 4 operators.A simple operating pinch tube wand allows for manual dispensing of solder mask throughany desired needle. The 1 gallon pressure tank has a large opening to allow easy pouringof solder mask from a 1 gallon or larger container and easy access for cleaning. Thissystem is purely pneumatic and easy to set up and operate.
comes with a regulator, gauge and pressure relief valve. They are available in 1, 2.5 & 5 gallon capacities.
bought pre-filled from a material manufacturer). Dual syringe accepted is 25ml x 25ml. Available in amanually controlled gun or pneumatically actuated version.
and UV Adhesives. The JGD1LBM fits 500 gram bottles of cyanoacrylate and is made of a clear extrudedacrylic shield for viewing of the material bottle. The JGD1LT is made for 1 liter UV adhesive bottles, and theJGD2500 batch mixer is used for pouring two or multi-component materials with a minimum of one hourworking life.
SpecificationsDiameter
JGD1GJGD2.5GJGD2.5GBPJGD5GJGD5GBP
HeightWeightPart #9.84 lb7.15 lb7.15 lb8.82 lb8.82 lb
8.50"14.65"14.65"24.80"24.80"
9.00"8.62"8.62"8.62"8.62"
IDHeightWeightPart #JGD1LBMJGD1LTJGD2500
2.13 lb 8.75" 2.75"
Specifications
visit www.jensenglobal.com forspecification on the JGD1LT & JGD2500
AirManual
Equi
pmen
t
Positive / Linear Displacement Syringe Dispenser
A break through in syringe dispensing where extreme accu-racy is required. This air-free positive displacement systemuses an auger with a custom designed stopper to displacematerial through the syringe. It operates using only electricityand has a built in motor in the handle to rotate the auger insidethe syringe. The syringe level, viscosity changes and tem-perature fluctuations have little or no effect on the dispensedshot. Available in three different output variations. All systemscome with 5 ft. gun cord and choice of high or standard torque.
Size Qty Pre-packed Description03cc 50 JG3AF-50 03cc barrel and mechanical stopper05cc 40 JG5AF-40 05cc barrel and mechanical stopper10cc 30 JG10AF-30 10cc barrel and mechanical stopper30cc 20 JG30AF-20 30cc barrel and mechanical stopper
Air Free Syringe Packages
Part #D600001RS232
Accessories
SDAV Small Deposit DisplacementLow TorqueD130111 3, 5, & 10ccD130211 30cc onlyD130311 3, 5, 10 & 30cc
High TorqueD131411 3, 5, & 10ccD131611 30cc onlyD131511 3, 5, 10 & 30cc
Min rate(cc/sec)
Max rate(cc/sec)
3cc5cc10cc30cc
Syringe MinVol (cc)
MaxVol (cc)
.00023
.00039
.00065
.00129
03.005.010.030.0
.006
.010
.016
.032
.138
.238
.392
.771
MDAV Medium Deposit DisplacementLow TorqueD850111 3, 5, & 10ccD850211 30cc onlyD850311 3, 5, 10 & 30cc
High TorqueD851411 3, 5, & 10ccD851611 30cc onlyD851511 3, 5, 10 & 30cc
Min rate(cc/sec)
Max rate(cc/sec)
3cc5cc10cc30cc
Syringe MinVol (cc)
MaxVol (cc)
.00045
.00079
.00131
.00257
03.005.010.030.0
.011
.020
.033
.064
0.2670.4770.7831.543
LDAV Large Deposit DisplacementLow TorqueD110111 3, 5, & 10ccD110211 30cc onlyD110311 3, 5, 10 & 30cc
High TorqueD111411 3, 5, & 10ccD111611 30cc onlyD111511 3, 5, 10 & 30cc
Min rate(cc/sec)
Max rate(cc/sec)
3cc5cc10cc30cc
Syringe MinVol (cc)
MaxVol (cc)
.00090
.00158
.00261
.00514
03.005.010.030.0
.023
.040
.065
.129
0.5520.9541.5673.086
www.jensenglobal.com
11
Mechanical stopper pictured-used with luer lock air syringe barrels
DescriptionStand for SDAV, MDAV or LDAV gunConnector for storage and transfer of programs
Acc
esso
ries
Dispensing / Squeeze Bottles A variety of squeeze bottles are offered from ½ oz. through
Needle & Syringe Kits These convenient kits include a sample of a wide variety of needles,
Part #JG120NKJG120NSJG120A
1/2 oz HDPE Cylinder & LL black cap1oz bellows (accordian) w/ luer insert1oz LDPE Boston Round & LL black cap2oz LDPE Boston Round & LL black cap4oz LDPE Cylinder & LL black cap8oz HDPE Cylinder & LL black cap
DescriptionJG0.5BCJG1.0ACJG1.0BCJG2.0BCJG4.0BCJG8.0BC
JG0.5BJG1.0AJG1.0BJG2.0BJG4.0BJG8.0B
JGC-512JGC-512NJGC24-410JGC-512WLJG1.0A-LL
Bottle & LLCap (10/bag)
Bulk Bottles
Bottle Caps
www.jensenglobal.com12
JG805FS Finger Switch is designed to be used in conjunction with any of Jensen Global's shot
20-410 n/a20-41020-41020-41024-410
NeckSize
Black Luer Lock (LL) capNatural/clear (LL) capBlack Luer Lock (LL) capWhite closed capLuer insert for accordian bottle
Description
20-410 n/a20-41020-41020-41024-410
Neck
20-41020-41024-41020-410n/a
Neck
1/2 oz HDPE Cylinder bottle1oz bellow (accordian) bottle1oz LDPE Boston Round bottle2oz LDPE Boston Round bottle4oz LDPE Cylinder bottle8oz HDPE Cylinder bottle
Description
Description500+ piece variety kit includes standard, teflon & tapered needles, tip capsSelection of most popular needles plus 3,5,10 & 30cc air and manual syringesIncludes JG120NS kit plus 3,5,10 & 30cc standard adapters
8 oz. The bottles have a uniquely designed luer lock cap which accept standard luer lock dispensingneedles. Boston Round bottles have a rounded neck. Cylinder bottles have a squared off neck. Bellowsbottles are accordian shaped. LDPE = low density polyethylene; HDPE = high density polyethylene. LuerLock (LL) caps are designed specifically for Jensen Global needles, and fit all other manufacturers' needles.
meter dispensing controllers. It can be attached to any size syringe or valve, as an alternative to theelectronic foot pedal. The connection to the controller can be modified for use with several other controllerson the market.
needles and syringes, or needles and syringes with standard syringe adapters.
1 2 3 4 5 6
7 8 91011
1 53 42 6
7 98 10 11
Fittings & Tubing
Static Mixers connect to the end of dual syringes or cartridges and mix two-component materials.
Cartridges & Nozzles are an alternative product when syringes are too small of a capacity.
Part #CLD-25-10CLD-60-10CLD-120-10CHD-25-10CHD-60-10CHD-120-10CLD-PB-10CLD-P-10CHD-14THR-10CHD-FC-10CHD-252-10CHD-254-10CHD-410-10CHD-420-10
JG160-424JG160-624JG160-624LLJG160-818JG160-818LLJG160-824JG160-840LLJG160-830JG161-230JG161-236LLJG190-212JG190-324LLJG190-416JG190-416LLJG190-521JG190-612JG190-612LLJG190-620JG190-620-SJG190-620LLJG160-HB-01
DescriptionLow density cartridge- 2.5 ozLow density cartridge- 6.0 ozLow density cartridge- 12.0 ozHigh density cartridge- 2.5 ozHigh density cartridge- 6.0 ozHigh density cartridge- 12.0 ozWiper plunger- blackWiper plunger- naturalRed Threaded plug for cartridgeRed Flange-wide end of cartridge1/6 opening x 2.5 inches1/8 opening x 2.5 inches1/32 opening x 4 inches1/16 opening x 4 inches
2424241818242430303612241616211212202020
Type-Endsteppedsteppedluer locksteppedluer locksteppedluer locksteppedsteppedluer lockluer slipluer lockluer slipluer lockluer slipluer slipluer lockluer slipluer slipluer lock
.189"
.248"
.248"
.366"
.366"
.366"
.366"
.366"
.497"
.497"
.093"
.125"
.187"
.187"
.213"
.250"
.250"
.250"
.250"
.250"
Elements DiameterPart #
turns luer slip or stepped nozzle into luer lock
Qty /Bag1010101010101010101010101010
13
Acc
esso
ries
Cartridges are available in low or high density and three different capacities (2.5oz., 6oz. and 12oz.).Cartridge accessories include plunger wipers, flange/end cap and threaded plugs. 1/4" threadednozzles screw into the cartridge for bead and dot dispensing.
StyleBellBellBellBellBellBellBellBellBellBellBayonetBayonetBayonetBayonetBayonetBayonetBayonetBayonetBayonetBayonet
1 53 42 6 7 98
11
10
12 13 15 1614 17
18 19 20 2321 22
DescriptionMetal male luer lock adapter to 1/8" nptMetal male luer lock adapter to 1/4" nptMetal male luer lock adapter to 1/4-28Metal male luer lock adapter to 5/16-28Metal male luer lock adapter to 10-32Metal male luer lock to small barb(1/8"ID or smaller)Metal male luer lock to medium barb(1/8"ID; 1/4"OD tube)Needle adapter 5/16-28 for JGD-MPWPlastic male luer lock adapter w/ 1/4-28 threadPlastic male luer lock adapter w/ 10-32 thread
Luer AdapterJGF-V1TJGF-V2TJGF-V3TJGF-V4TJGF-V5TJGF-V6BJGF-V7BJG26014LF-SMTLL-1F-XMTLL-1
1 2 3 4 5 6 7 8 910
DescriptionFemale luer to luer (connects two syringes together)Polypropylene compresion fitting 1/8 male npt to 1/4"od tube1/8 female npt x 1/4 metal coupler for JGD200SGreyfitting 1/4" od to 5/32" od tube quick connectBlue/black fitting 1/4 to 5/32 tube quick connect1/4 male npt x 1/4 metal coupler for other shot metersTwo ear clamp (oc clamp)
Misc FittingsF-FTLC-1JGF200-1JGF200-2JGF200-3JGF200-4JGF200-5JG-OCCLAMP
11121314151617
DescriptionPolyurathane blue flexible air tube 5/32 odPolyethylene green tubing 5/32Polyethylene green tubing 1/4Blue silicone tubing for JGD-MPW wand1/4 od air adapter tubingMaterial line for JGD-MPWBlack UV polyethylene tubing
TubingPU-156-4LRPE-2.5AGPE-4AGJG1013JGF-AL14JGFAL14LPE-4AB
18192021222324
24
Connection to the material is either bell or bayonet style, and dispensing end can be luer slip, luer lock,or stepped. Static mixers are sold per each.
