Driving performance with a flexible range of controllers Control solutions for industry Due to possible changes in standards and equipment, the features described in this document in the form of text and images are subject to confirmation by Schneider Electric. Publication: Schneider Electric Photos: Schneider Electric Design: pemaco Print: 04/2010 Schneider Electric Industries SAS DIACED1110010EN Head Office 35, rue Joseph Monier - CS30323 F92505 Rueil-Malmaison Cedex FRANCE www.schneider-electric.com ART. 837782 The choice is yours... Modicon M340 I/O Maximum DIO in rack 1024 2048 63 488 Maximum I/O in rack 256 512 3 968 ARCHITECTURE Maximum number of racks 4 16 189 Maximum length between racks 30 metres 700 metres (250 deport rack, 100 extended rack) 4 572 Type of rack 4-6-8-12 slots 4-6-8-12 slots 2-3-4-6-10-16 slots Hot swapable modules All except CPU Add/remove I/O module in run mode - - Yes COMMUNICATION CAPABILITIES Ethernet/IP and Modbus TCP Up to 128 devices, FDR, Web pages CANopen On CPU port - PROFIBUS DP Remote Master connected on Ethernet Supports 126 slaves and up to 2 KW Input and 2 KW Output data. With a COM DTM for integration of tools based on FDT/DTM technology. CPU Battery No battery required - Backup and storage on an SD Card - Data on memory flash Required Integrated ports in CPU USB + Ethernet, CANopen, Modbus USB + Ethernet, CANopen USB + Modbus + Ethernet File storage In SD Card 128 MB maximum with FTP access - - APPLICATION STRUCTURE Multitask Yes EXPERT MODULES Conformal coating For harsh environments and extended temperature (-25°C to +70°C) For harsh environments Counting Up to 36 channels Up to 1MHz Up to 500 kHz Motion With Motion Function Block over CANopen in Unity Pro - PTO module Module 2 independent axis, up to 200kHz per channel, up to 36 channels With CFY stepper modules 2 axes - Axis module No synchronized axis Linear interpolation Complex trajectory With Sercos Weighing Partnership solution with CAPP Module 8 weighing sensors/2 expert channels - RTU module In rack module: DNP3, IEC 101/104 and Modbus RTU protocols Via W@de RTU or ETG 3000 gateways Time stamping module With RTU module - Yes Process control, programmable loop Library Library up to 30 loops Library up to 100 loops Availability - Hot standby CPU Hot standby CPU and redundant power supply Safety - Preventa module on Modbus /CANopen SIL2 or SIL3 system configuration Our Programmable Automation Controllers (PACs) are built to suit the needs of the process industry. The hardware is modular and scalable and supports a full range of input/output modules, along with dedicated communications and fieldbus modules, for connection to smart devices and instrumentation. Our PACs form a key part of PlantStruxure TM . PlantStruxure TM is a collaborative system that allows industrial and infrastructure companies meet their automation needs and at the same time deliver on growing energy management requirements. In a single environment, measured energy and process data can be analyzed and used to yield a holistically optimised plant. PlantStruxure is not only easy to engineer and simple to maintain, it delivers a clear picture of what is happening in your process. It integrates easily with third party devices and provides added value in the form of Historian and Manufacturing Execution System functionalities. In short, PlantStruxure helps you drive increased return on assets and meets your application needs. > Scalable for changing times From tens of I/O to hundreds of thousands, it means that you can start out small and grow as your requirements change. > Flexible because your process is unique Our system supports the architectures that you need for your application. Single site, multiple sites, distributed control, local or remote control, discrete, process, safety, batch, all within the one system. > Integrated to reduce risk From devices to MES, all of the system components are designed to work with each other and with our chosen technology partners. > Collaborative to increase efficiency It is open to exchange information with other plant and business software, and fosters an environment of collaboration by delivering the process information you need in the way that you like to see it. Modicon Premium Modicon Quantum
Transcript
Driving performance with a fl exible range of controllers Control solutions for industry
Due to possible changes in standards and equipment, the features described in this document
in the form of text and images are subject to con� rmation by Schneider Electric.
Publication: Schneider Electric
Photos: Schneider Electric
Design: pemaco
Print:
04/2010
Schneider Electric Industries SAS
DIA
CE
D1
110010E
N
Head Of� ce
35, rue Joseph Monier - CS30323
F92505 Rueil-Malmaison Cedex
FRANCE
www.schneider-electric.com
ART. 837782
The choice is yours...
Modicon M340
I/O
Maximum DIO in rack 1024 2048 63 488
Maximum I/O in rack 256 512 3 968
ARCHITECTURE
Maximum number of racks 4 16 189
Maximum length between racks 30 metres 700 metres (250 deport rack,
100 extended rack)
4 572
Type of rack 4-6-8-12 slots 4-6-8-12 slots 2-3-4-6-10-16 slots
Hot swapable modules All except CPU
Add/remove I/O module in run
mode
- - Yes
COMMUNICATION CAPABILITIES
Ethernet/IP and Modbus TCP Up to 128 devices, FDR, Web pages
CANopen On CPU port -
PROFIBUS DP Remote Master
connected on Ethernet
Supports 126 slaves and up to 2 KW Input and 2 KW Output data.
With a COM DTM for integration of tools based on FDT/DTM technology.
CPU
Battery No battery required - Backup and storage
on an SD Card - Data on memory � ash
Required
Integrated ports in CPU USB + Ethernet, CANopen, Modbus USB + Ethernet, CANopen USB + Modbus + Ethernet
File storage In SD Card 128 MB maximum
with FTP access
- -
APPLICATION STRUCTURE
Multitask Yes
EXPERT MODULES
Conformal coating For harsh environments and extended
temperature (-25°C to +70°C)
For harsh environments
Counting Up to 36 channels Up to 1MHz Up to 500 kHz
Motion With Motion Function Block over CANopen in Unity Pro -
PTO module Module 2 independent axis, up to
200kHz per channel, up to 36 channels
With CFY stepper modules 2 axes -
Axis module No synchronized axis Linear interpolation
Complex trajectory
With Sercos
Weighing Partnership solution with CAPP Module 8 weighing sensors/2 expert
channels-
RTU module In rack module: DNP3, IEC 101/104
and Modbus RTU protocolsVia W@de RTU or ETG 3000 gateways
Time stamping module With RTU module - Yes
Process control, programmable
loopLibrary Library up to 30 loops Library up to 100 loops
Availability - Hot standby CPU Hot standby CPU and redundant power
supply
Safety - Preventa module on Modbus /CANopen SIL2 or SIL3 system con� guration
Our Programmable Automation Controllers (PACs) are built to suit the needs of the process industry. The hardware is modular and scalable and supports a full range of input/output modules, along with dedicated communications and fi eldbus modules, for connection to smart devices and instrumentation.
Our PACs form a key part of PlantStruxureTM.
PlantStruxureTM is a collaborative system that allows industrial and infrastructure companies meet their automation needs and at the same time deliver on growing energy management requirements. In a single environment, measured energy and process data can be analyzed and used to yield a holistically optimised plant.
PlantStruxure is not only easy to engineer and simple to maintain, it delivers a clear picture of what is happening in your process. It integrates easily with third party devices and provides added value in the form of Historian and Manufacturing Execution System functionalities. In short, PlantStruxure helps you drive increased return on assets and meets your application needs.
> Scalable for changing timesFrom tens of I/O to hundreds of thousands,
it means that you can start out small and grow
as your requirements change.
> Flexible because your process
is uniqueOur system supports the architectures that you
need for your application. Single site, multiple sites,
distributed control, local or remote control, discrete,
process, safety, batch, all within the one system.
> Integrated to reduce risk From devices to MES, all of the system components
are designed to work with each other and with our
chosen technology partners.
> Collaborative to increase effi ciencyIt is open to exchange information with other plant
and business software, and fosters an environment
of collaboration by delivering the process information
you need in the way that you like to see it.
Modicon Premium Modicon Quantum
A large choice of power supplies
To � t the size of the rack.
To accomodate your electrical
distribution network strategy.
Communication modules for Ethernet and major fi eldbuses
High-capacity Converged
Ethernet modules control
Modbus TCP and EtherNet/IP
devices simultaneously.
Dedicated modules connect
to devices through Modbus,
CANopen, ASinterface,
Pro� bus, Interbus and WorldFIP.
Distributed I/O> From simple pre-wired systems to I/O integration platforms,
the Modicon STB range provides solutions whatever
your requirements.
> Five communication protocols.
> High availability: dual Ethernet link.
> Re� ex functions for fast processes.
Use SoCollaborative Engineering to con� gure
your Modicon PAC to help you accelerate
your engineering work� ow.
Multi-racks and extendable racks
Can expand as your system
grows.
Minimises cabinet space.
High density I/O options to reduce cabinet space and system cost
A wide catalog of I/O modules - digital, analog and specialist - is available
A fl exible hardware offerBuilt for the process industry
SoCollaborativeEngineering
Suitable for harsh environments
Conformal coating.
Extended temperature.
Meets international standards
The Modicon PAC
conforms to standards
all around the world.
Certifi ed for use in SIL3 applications
Unity ProConfi guration of Modicon Programmable Automation
Controllers
Vijeo CitectDesign the operation environment
of your system
Web DesignerDesign of Web based diagnostics
and monitoring applications
UAG / sg2
Management of the system from
a single location
LibrariesTested and validated process and device objects for
system engineering
Satisfying your needs throughout your system’s life cycle
Yourprocess
Reduce your maintenance costs> Cut system-related downtime and get your plant
up and running quickly.
> Redundant network topologies continue to operate even
when a network link fails.
> Hot standby architectures ensure continuity
in the process, even when one PAC is off-line.
> Faulty Device Replacement to quickly upload con� guration
data to a new device.
> Secured access to the controller program for fast diagnosis.
> Spare parts seervices to minimise downtime.
Smoothly upgrade from existing installations> Thanks to quick wiring adaptors and dedicated
communication cards, you can migrate your old
PLC hardware to the new Modicon PAC while
still preserving your wiring.
> Easily upgrade your existing control
con� guration using software convertors.
Design
Operate
OptimiseMaintain
Renew
Reduce your installation costs> Five IEC 1131-3 languages to mix as you choose.
> Distributed I/O on Ethernet reduce cabling costs while
increasing subsystem architecture � exibility.
> FDT/DTM make it easy to con� gure devices.
> Tested and validated application libraries focused
on the process industry.
> Detect devices on the network and add
them to your con� guration in one easy
step using Fieldbus Discovery.
> Add devices to the con� guration easily
through DTM and EDS � les.
Operate your process more effi ciently> Self-checking hardware and integrated
diagnostics notify the user of any system
issues.
> Multitasking functions and control program
segmentation ensure the best utilisation
of controller resources.
> Fast processing scan times up to 1 ms.
> Dedicated hardware modules and
speci� c functionality deliver regulatory
control, as well as cascade, motion,
discrete and more.
> Built-in RTU features provide upstream
communications with master stations and
downstream communications with other
RTU substations, and slave � eld devices.
Implement tighter process control> Tested and validated application libraries focused
on the process industry
- Fuzzy Logic
- Sequencing
- Multivariable Predictive Control
- Advanced Process Control
> Our controllers support Multivariable
Predictive Control functions to enable
you to operate your process closer to the
limits and maximise economic returns.
> Our modernisation services provide you
with a turnkey solution to update your aging
systems according to your speci� c needs
and requirements, allowing you to select the
approach that is right for you.
A scalable selection of CPUs and memory options to satisfy your needs
