The Construction Products Regulation (CPR) grace period is almost over!Will you be ready on July 1?
Belden is working diligently to make sure its cabling products comply with CPR rules:
• Made investments in state-of-the-art equipment and resources
• Measuring Belden cable to new CPR standards
• Ensuring all applicable Belden cables are certified by a third-party Notified Body
• Making adjustments to databases and online generators; part numbers, technical data sheets, labeling, CE markings, Declarations of Performance and cable printing
• Supporting and Training our partners so they are ready
July 1, 2017: All cable for fixed installations in buildings and civil engineering works in the EU must comply with each country’s Euroclass rating, in order to meet CPR regulations.
Are you prepared? You can Be Certain Belden is!
Important Date
Learn more at http://info.belden.com/cpr
DoP Number: 1887ENH-6201 1. Unique identification code of the product type: 1887ENH 2. Description of the product type: TWIN ISTP CAT.7 1887ENH - GRAY 4x2xAWG23
3. Intended use: Supply of communication in buildings and other civil engineering works with the
objective of limiting the generation and spread of fire and smoke 4. Contact address:
Belden Wire & Cable BV Edisonstraat 9 5928 PG Venlo The Netherlands Tel. +31 (0) 773 878 346 Email: [email protected]
5. System or systems of assessment and verification of constancy of performance of the construction product: System 3 6. Notified body code: 2659 7. Declared performance:
Essential characteristics Performance Harmonized technical specification
Reaction to fire Dca-s1,d1,a1 EN 50575:2014
Dangerous substances None
8. The performance of the product as identified is in conformity with the declared performance in
point 7. 9. This declaration of performance is issued under the sole responsibility of the manufacturer
identified in point 4. Signed for and on behalf of the manufacturer by: Name and function signer Mr. R. Reubsaet, Quality Manager EMEA Place Date Signature Venlo 8/3/2017
CPR Testing in Action
Precise cable mounting
Multiple cables tested
Cable removed from chamber
PC measures heat release
Align ladder vertically
Burnt length is classified
Graph of heat release
Test is witnessed by 3rd party
Precise burnt length measured
Label with DoP and classification
Belden Technical Support +31 (0) 773 878 346 www.beldensolutions.com©Copyright 2017, Belden Inc. CONSTRUCTION-PRODUCTS-REGULATION_BR_OTHR_BDC_0317_E_EMEA
Belden, Belden Sending All The Right Signals, GarrettCom, Hirschmann, Lumberg Automation, Tofino Security, Tripwire and the Belden logo are trademarks or registered trademarks of Belden Inc. or its affiliated companies in the United States and other jurisdictions. Belden and other parties may also have trademark rights in other terms used herein.