The Daily Miller 2016

millerwww.millerdivision.com

N º 2 / 3 € 2 0 1 6

MILLER DIVISIONNEW COLLECTION

Longboards, cruiserssurf skates, backpacks

and more...

THE NEWSUMMER CAMPS

Surf & Skate Camps!

INTERVIEWSOkuda Art:

Kaos Temple

Mischo Erban:World Speed Record

22

3.

4.

5.

8.

9.

55.56.

59.

62.

INDEXPublisherYou are Miller

Skate in numbers

Our spot for longboardWest Park, Madrid

Surf & Skate CampsThe new summer camps

Miller CollectionNew longboards, cruisers, protectors, backpacks...

Miller Freeride Team

I Miller Division FreerideEl Soplao

Mischo ErbanThe fastest man in the world

OkudaKaos Temple or the“Sistine Chapel of Skate”

The

Daily MillerDirected by

Ricardo Garrudo

Written byIván García Arozamena

Enrique Becerril

Managing Editor / Art and DesignMaría Burgueño

PhotographyLuis de las Alas

RidersCristina Gutiérrez / Derek Blanquer

Santos Múgica/ Fabrizio ClausiSean Gunning / Iván García (Voodoo)

Adam Warchol / Teko BarrioAngel Calvo/ Jos Salaris

Ruth Sierra/ Fernando PenillaUlises Diaz/ Borja Cueto

Sergio Garrudo/ Paula Garrudo Adrián Guridi / Ana Welsh

CreditsSunset Camper, Doc Caribbean, Mischo

Erban, Okuda San Miguel, Vissla,Daniel Nuez, Luis Lemin, Riderland Skate

Camp, Los Locos Surf Camp, Art Surf Camp, SSSA, Church Brigade and all of

you supporting us.

[email protected]

FRONT COVERPhoto: Luis de las AlasRiders: Cristina Gutiérrez and Fernando Penilla

3

Four years have passed since Miller was born but there is something that has never changed and that is the eagerness with which we began. This eagerness continues being what drives us to continue creating specific products for each rider and modality. During these years, we have learnt a great deal with our team of riders, collaborators and artists, clients and friends, adjusting ourselves to meet their needs at each moment.

Our motto continues to be the same: “YOU ARE MILLER”. We still need you, your way of seeing things, of enjoying the little things in life, how you value each little detail, details that are important to us and encourage us to continue growing in everything connected to skateboards and this form of life we have chosen.

You are

Miller

4

55

The Paseo de Camoens is in the Parque del Oeste (West Park), a park located in Madrid, between the road towards La Coruña, the University City and the district of Moncloa. Back in the day, this area was the main rubbish tip of the city, but fortunately, in 1906 the authorities changed the use for it to be used and enjoyed by the inhabitants of Madrid. It then became a place for walks and rest, a green area that, with the passing of time, has become a place to escape from the city, meters away from the Madrid Historical Centre.

Fortunately for athletes, and in particular, for skaters and longboarders, in 2003, the City Council of Madrid approved cutting off the traffic on Paseo de Camoens and Calle Ruperto Chapí during weekends and bank holidays with the purpose of preserving this green area and offering an outdoor space close to the city centre.

Skate and longboard riders did not go to this place much before 2006-2007, but after, and coinciding with the boom of longboard disciplines, no weekend or bank holiday went past without riders doing their tricks, dancing, practising slalom or simply carving away in this now legendary spot that the riders themselves have baptised as WEST PARK.

The West Park is an ideal spot for riders of all levels because it has a first very large area with a slight inclination but sufficient to practice slalom, dancing, carving or freestyle. A more prominent downward slope follows this, with four bends for those seeking stronger sensations and more speed and skids. This more prominent area is ideal for fast carvings. The best thing about it is that it is surrounded by trees and green areas that help you forget about being in such a bustling and stressing city, like Madrid.

Many are the riders that have visited this incredible spot and did their little bit to give it more standing

and acknowledgement. Many renowned riders like Ra, Quique, Jabirras, Marjetes, Jörge and Bea (lachicadelacurva), the Caribbean family, Álvaro Rivas, Ricardo Damborenea (RD), Red (40sk8), Javi and Dany Navarro (Javiboards), Sergio, Willy, Jaime (Roadrider), David (Nothink), Sophie and many more that gathered there on Sundays to share something as simple as a hobby, to feel the wind on their faces and in short, be children again, have ridden down its asphalt.

The best thing about this is that we will never be able to forget this spot now thanks to the efforts of photographers and filmmakers like Gordon Dionne (MyProfe), Alberto Alepúz (PERROPRO) and Juan Rayos, who have portrayed both the magic and the riders of this spot in many of their photos and videos. In particular, MyProfe has also been taking photographs of practically every rider that has ridden the asphalt at WEST PARK each Sunday since 2009. So, if you have skated on this spot, it is very likely that you have been caught on his camera. Juan Rayos and Perropro have also delighted us with the most cinematographic or documentary side of this spot in some of their videos. Thank you for this!

Also, the WEST PARK has hosted several skate and longboard events and, in some cases, has brought together more than 500 people united by a piece of wood with a pair of trucks and four wheels. Some examples are the 1st Spanish Slalom Championship, the International Longboard Day or events like the Noche en Negro and El Patín más Rustiko.

Do not miss this spot in spring and summer, because in these times of the year, skating sessions begin in the morning and do not cease until sundown with a picnic in-between, much laughter and a unique atmosphere.

West Park

By Doc Car ibbean

A legendary spot in Madrid

Photo : SSSA

Lately and especially in summer, surf schools, surf camps and skate camps are really easy to come across.

They have become part of our environment and daily life, but this was something nearly unimaginable until not so long ago. Surf and skate were minority sports and everyone learnt as best they could. All this has changed now; the number of riders has increased and the amount of people wanting to learn has led to the success of all these schools and camps.

These camps and schools have also begun to teach longboard skate courses and hold activities, for when there are no

waves, to learn how to skate and to perfect the positions or correct bad postures on land, which would otherwise be harder to achieve in the water.

Skate camps are also more and more common; a safe and fast way of learning and meeting new friends at the same time.

An example of a skate camp is RIDERLAND in Chiclana, Cadiz, in the south of Spain, captained by José Panes (PITU), an all-time skater.

One day, he realised that what he did best in the world was skate and share his experiences with new skaters. Seeing the skate parks full of children skating and learning as best they could, it was very clear to him: He was going to open a skate camp!

At the same time, our friend “Captain Jairock” mentioned the project and the possibility of giving Pitu a hand.

After this, everything came easy and the RIDERLAND school/camp is now a reality, not to mention one of the best valued by students, parents and skaters that visit it.

We are strongly committed to new generations and anyone that steps onto a skateboard for the first time. This is the reason Miller Division actively collaborates with a great number of skate and longboard associations and schools, as well as surf & skate camps from day one. Providing the necessary material and everything they can to give many children the opportunity of skating or learning about the skate, who would otherwise find it hard.

Who does not remember their first ollies or their first skid? The sensation of happiness lasted all day! At Miller, we would like to continue seeing those beaming faces!!!

These sensations and what the children transmit is what leads us to support schools, associations and camps.

8

SURF & SKATECAMPS

The new summer campsBy Iván García Arozamena

Photo: “Los Locos” Surf School

Photo: “Los Locos” Surf School

Photo: Rocio Muriel

9

millerCollection 2016

READY... STEADY...SKATE! ! !

10

11

12

Edges

Contribute to the traction of the foot to the board. More rounded edges free your feet (dancing, freestyle) and, conversely, more squared edges have a better grip (freeride, slide...)..

Wheel wells Concave at the height of the wheels, to achieve an added space between the wheels and the board. With this, we prevent the feared wheelbites, a guide to know where your feet are and a better grip on heels and pointer.

Concaves

The different concaves fit with each model, to adapt to the modality for which each longboard has been designed. A subtle concave allows moving freely on the longboard (dancing, cross step, etc.), while a medium to high concave grabs the foot to the board better (slide, freeride, etc.). We also have the double concave that helps adjusting the foot to the maximum for a more ergonomic grip (freeride, downhill).

Drop lowered

This shape of the board is designed so that the gravity center is lower to achieve more stability.

Countersink trucksBy countersinking the trucks the screws are flush to prevent you from stumbling if you move your feet to the nose or tail of the board..

Rock finish Rock finish (worn effect) to make the wheels skid from the first day.

Grip and design, all in one

We have visually enhanced the form of the grip tape on some of the models with the intention of introducing graphics on the upper side of the longboards... Stylish on the top and bottom.

LIGHTCONCAVE

EXTRA-LIGHTCONCAVE

MEDIUMCONCAVE

MEDIUM-HIGHCONCAVE

DOUBLECONCAVE

ROUNDSQUARE

EDGE

SQUAREDEDGE

ROUNDEDEDGE

SUPERSQUARED

EDGE

Every detail countsEdges, concaves, wheelbites...

At Miller, we know the importance of every single component of a longboard: board, trucks, wheels, bearings, sandpaper, concave, etc. as well as the benefits every improved detail can offer. That’s why we

adapt each improvement to each modality or use as much as possible, ensuring that everything fits perfectly.

Founded back in 1992 and based in Boulder, Colorado, Seismic Skate Systems is one of the oldest longboard brands. The company designs and manufactures the wheels that have achieved more podiums at the highest level. Using the most advanced materials and engineering technologies to radically improve the riding experience of all elite riders who are looking for the highest performance.

The Hot Spot, possibly the fastest wheel in the world, is the wheel that the skater, Mischo Erban, who holds the Guinness World Record and IGSA Record of 130.08 MPH, uses.

Its argument is simply to provide the urethane formula with more grip and rebound, with lower resistance to rolling than any other formula on the market. In addition, its core with Hub technology makes these wheels surprisingly lightweight and with a greater acceleration, the most versatile Seismic wheel around.

Miller, as the champions of the world do, trusts in the Seismic wheels.

13

Its zebra bamboo plies and its two layers of fiberglass make this longboard a true spring, thanks to its flex, ready to accelerate the return energy of each turn.

Bamboo makes it flexible and very light. The two layers of alternately laminated fiber will provide the necessary resistance to flex again and again without losing its pop and original flex.

If you are looking for a longboard for cruising, pumping or carving, this will be your best ally.

Seismic Wheels

Return On Pressure

BAM

BOO

FIBE

RG

LASS

ZEBR

A B

AM

BOO

FIBE

RG

LASS

BAM

BOO

X.R.K.P

Xtreme Reverse King pinYour turns will have no limits with the new special geometry front xrkp trucks! Thanks to their extreme turning angle, superior to conventional rkp (reverse king pin) trucks, you will be able to do surprising turns, and at the same time, increase the pumping and a boost similar to when you carve on a wave. All this without contraptions, bearings, springs or useless pieces, reducing the weight and volume but increasing their useful life, because they hardly have any additional maintenance compared to traditional trucks with bushings.

CARVING SLIDE

DANCING FREESTYLE

FREERIDE

CRUISERSERIES

Back in the 70’s, people used skates in a very different way. There were no major tricks and people simply did turns simulating being on

a wave. Nowadays, these types of skates, the smaller ones, are perfect for getting around fast and performing one or two old school tricks.

15

SunriseThe cruiser family grows! You won’t want to let it go! 27.5 inches long to have just what you need and 8.2 inches wide so your foot rides as comfortable as possible. Your space and stability issues will no longer be a problem. Manoeuvrable and stable ! What more can you ask for in a cruiser? Put it in the boot, go to the beach and between swim and swim... Slide!

Sweet HomeIs there anything better than home? There is indeed. The Sweet Home 27.5”. With the same features as the Sunrise: a single kick, l ight concave, 5” truck.. . A cruiser with the perfect size and added width. Your rides will be easy-peasy. Limited series.

Length: 27,5” Width: 8,2” Wheelbase: 14,2” Wood: 7 x plies100% Canadian MapleGrip: High performanceTrucks: Miller high quality steel 5”Hardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 60mm, 80a

Technical featuresCARVING

SLIDE DANCING

FREESTYLEFREERIDE

DOWNHILL PUMPING

CRUISINGRAMPS

HHHHHHHHHHHHH

HHHHHHHHHHH

100%CANADIAN

MAPLE

HIGHPERFORMANCE

GRIPTAPE

ABEC 7CHROME STEEL

BEARINGS

MEDIUMCONCAVE

CREEK60MM / 80A

ROUNDSQUARE

EDGE

16

The CampsAre you ready for the skate camp? Well, this is your skateboard! Skate on all types of terrains with its form inspired by the skateboards of the 90’s, its 60 mm wheels and 5” trucks! Street, Cruising, Ramps, Slalom…

Length: 31” Width: 8.5” Wheelbase: 14,93” Wood: 7 x plies100% Canadian MapleGriptape: High performanceTrucks: Miller high quality steel 5”Hardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 60mm, 80a

Technical features

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL PUMPING

CRUISINGRAMPS

HHHHHHHHHHHHHHHHHHHHHHHHHHHH

100%CANADIAN

MAPLE

HIGHPERFORMANCE

GRIPTAPE

ABEC 7CHROME STEEL

BEARINGS

MEDIUMCONCAVE

CREEK60MM / 80A

COLOUREDPLY

ROUNDSQUARE

EDGE

Photo: I.G.

17

JFKFinally, Riders have what they deserve! First-class! Fly with this extra wide skateboard, both in axles and the board itself. Ramps, Street, Cruising…The rider force one is now here!

Duck UnitThe duck unit is here! Disembark with this pool board and its 8.7” wide, double kick, 6” axles... Any mission will be a piece of cake with the Duck Unit 31”!

Length: 31” Width: 8,7” Wheelbase: 14,93” Wood: 7 x plies100% Canadian MapleGrip: High performanceTrucks: Miller high quality steel 6”Hardware: AllenBearings: Abec 7Chrome steelWheels: Creek 60mm, 80a

Technical features

100%CANADIAN

MAPLE

HIGHPERFORMANCE

GRIPTAPE

ABEC 7CHROME STEEL

BEARINGS

MEDIUMCONCAVE

CREEK60MM / 80A

COLOUREDPLY

ROUNDSQUARE

EDGE

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL PUMPING CRUISING

RAMPS

HHHHHHHHHHHHHHHHHHHHHHHHHHHHH

18

JungleThe City can be a jungle, but we have a solution: Jungle 29. 7 Canadian Maplewood plies, single kick, smooth concave, 60 mm wheels... Street, Slalom, Quarters... No limits!

Length: 29” Width: 8” Wheelbase: 15,67” Wood: 7 x plies100% Canadian MapleGrip: Transparent thick sandTrucks: Miller high quality steel 5”Hardware: Allen Bearings: Abec 7 Chrome steelWheels: Creek 60mm, 80a

CARVING SLIDE

DANCING FREESTYLE

FREERIDE

DOWNHILLPUMPING CRUISING

RAMPS

HHHHHHHHHHHHHHH

HHHHHHHHHHHHH

Technical features

CANADIANMAPLE

ABEC 7CHROME STEEL

BEARINGS

COLOUREDPLY

ROUNDSQUARE

EDGE

MEDIUMCONCAVE

LegacyThe essence of skateboarding in its purest form! Your first tricks on a luxury skate thanks to its smooth concave, single kick, Canadian Maple laminate, zebra bamboo and Seismic wheels.

Length: 29” Width: 8” Wheelbase: 15,67” Wood: 6 x plies Canadian Maple,1 x ply bambooGriptape: High qualityTrucks: Miller high quality steel 5”Hardware: AllenBearings: Abec 7 Chrome steelWheels: Seismic Rippler 59mm, 86a

CARVING SLIDE

DANCING FREESTYLE

FREERIDE

DOWNHILL PUMPING CRUISING

RAMPS

HHHHHHHHHHHHHHH

HHHHHHHHHHHHH

6 PLIES 100%CANADIAN

MAPLE

HIGHQUALITY

GRIPTAPE

ABEC 7CHROME STEEL

BEARINGS

SEISMICRIPPLER

59MM

COLOUREDPLY

ROUNDSQUARE

EDGE

MEDIUMCONCAVE

1 PLYBAMBOO

ZEBRA

Technical features

19

20

SURF SKATESSERIES

Surfing the asphalt has never been so easy. We present the new Surf Wheels collection by Miller. Feel total freedom to turn!! Thanks to its special geometry front trucks, the turning angle is higher compared to conventional trucks RKP (reverse kingpin). The back trucks (standard geometry) will give you the stability you need. Both trucks are also higher, so you don’t have to worry about the feared wheelbites. This enables

you to do surprising turns, and it also gives you pumping and a boost similar to when you carve on a wave. You won’t need to use your foot to gain impulse and you can even increase speed! All this without contraptions, bearings, springs or useless pieces, which reduces the weight and volume, and increases their useful life, because they hardly need any maintenance.

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING

RAMPS

21

MundakaA model inspired by one of the best left-handers of the world with a sandy seabed located in the North of Spain. Carve, pump and successfully overcome any obstacle that comes your way with its front XRKP truck, its 30” single kick board and 70 mm wheels.

Length: 30”Width: 9,8”Wheelbase: 16,12”Wood: 7 x plies 100% Canadian MapleGriptape: High performanceFront Trucks: Miller special system. 356 premium Aluminum, press casting, 160mm (6,5”)Back Trucks: Miller standard skateboard extra high. 356 premium Aluminum, press casting, 160mm (6,5”)Hardwhare: 1,25” Allen screwBearing: Abec 9 with nylon cage rubber shieldWheels: Creek 70mm 78a

Technical features

KirraSet in the heart of the Gold Coast, we find Kirra; Fast long right-handers and never-ending tubes... A wave demanding a lot of speed to overcome its obstacles. Prepare your quiver! Front XRKP truck, 31.5” single kick board and 70 mm wheels. Carve, turn and squeeze every bit of its energy!

Length: 31,5”Width: 10”Wheelbase: 17,71”Wood: 7 x plies 100% Canadian MapleGriptape: High performanceFront Trucks: Miller special system. 356 premium Aluminum, press casting, 160mm (6,5”)Back Trucks: Miller standard skateboard extra high. 356 premium Aluminum, press casting, 160mm (6,5”)Hardwhare: 1,25” Allen screwBearing: Abec 9 with nylon cage rubber shieldWheels: Creek 70mm 78a

Technical features

X.R.K.P.

X.R.K.P.

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING

RAMPS

HHHHHHHHHHHHHHHHHHHHHHHHHHHHHH

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING

RAMPS


100%CANADIAN

MAPLE

HIGHPERFORMANCE

GRIPTAPE

ABEC 9CHROME STEEL

BEARINGS

EXTRALIGHT

CONCAVE

CREEK70MM / 78A

ROUNDSQUARE

EDGE

COLOUREDPLY

100%CANADIAN

MAPLE

HIGHPERFORMANCE

GRIPTAPE

ABEC 9CHROME STEEL

BEARINGS

EXTRALIGHT

CONCAVE

CREEK70MM / 78A

ROUNDSQUARE

EDGE

COLOUREDPLY

22

CARVERSERIES

Longboards inspired on the classic surfboards. Its pintail form, inverted trucks and large and soft wheels are ideal for lengthy rides and

surfing the asphalt. Bend after bend, carving until your legs can do no more.

GreetingsThe Greetings! A very handy and versatile longboard, thanks to its 36”, medium concave and top mount. Designed for any rider and weight.

DonutsWith the same features as the Greetings, the Donuts has high-quality griptape and a very special design.

23

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING


100%CANADIAN

MAPLE

ABEC 7CHROME STEEL

BEARINGS

CREEK70MM / 80A

COLOUREDPLY

MEDIUMCONCAVE

ROUNDSQUARE

EDGE

Length: 36” Width: 9,3” Wheelbase: 25,12” Wood: 8 x plies 100% Canadian MapleGrip: Greetings: Transparent thick sandDonuts: High quality griptape

Trucks: Miller reverse high quality Steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

Technical features

24

FlamingoWould you like to be the most sophisticated chick around? With the Flamingo pintail and its 40” long, you will have the necessary space to move your feet as you wish. Carve...cruise... and feel the stability thanks to its countersink trucks and 70 mm wheels.

ExplorerThe new Explorer! A 40” pintail, maneuverable and with a medium concave that gives you an extra grip, perfect for carving, pumping, cruising, freeride... are you ready for adventure?

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING

HHHHHHHHHHHHHHHHHHHHHHHHH

Length: 40” Width: 9.5” Wheelbase: 26,59” Wood: 8 x plies 100% Canadian MapleGrip: Transparent thick sandTrucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

Technical features

25

2626

Hopi Kachina CollectionMyths and legends

At Miller, we feel inspired by nature. This is why, in this new collection illustrated by the artist Pablo Burgueño “Cue”, we have wanted to honour a tribe that represents all the values for how they

care for nature: The Hopi Tribe. The history of this tribe has left a very special footprint over the years in how they treat the living beings surrounding them and how they live in harmony with nature.

The Hopi Tribe are natives of North America based in Arizona. They are the oldest known inhabitants of America. There are many myths and legends on their origin, but they know very well that they came to this planet from another world and they still conserve dolls or small figures with helmets and astronaut suits dating back over 2000 years from their old handicrafts. According to these people, these figures represented beings that came from the stars.

These beings left, but promised to return, and made it clear to The Hopi Tribe that they were the custodians of a wisdom that must be transmitted to humanity. They pass this knowledge on by teaching people about nature, and how to live with it to keep a painstaking conservation of the planet Earth. They insist on treating all forms of life as sacred: animals, trees, vegetation, water, and the entire planet... They are aware of a universal plan for the creation and conservation of our beautiful world and have integrated this concept into their daily lives. The Hopi prophecies, written on two stone slabs that they have kept for over 10,000 years, gather an entire collection of instructions on how to live in peace and harmony with the universe. These slabs also warn us about what could happen

if we do not take heed.

The Hopi Tribe has never ceased to warn us that we are at the last shaking of the earth. They call this era “ The Times of Transformation”, where we must live in harmony with the environment, with the Earth and with our neighbours. All the natural disasters could be minimised with a change of conscience, but if we don’t change, our civilisation will be condemned to disappear. The KACHINAS are ancestral spirits that are at the mid-point between gods and men, some with good powers and others with evil powers. These Kachinas are represented by colourful paintings, dolls with feathers, masks, dances and ceremonies. They intercede with the spirits of the other world on behalf of their Hopi brothers living on the Earth.They can bring rain; bountiful harvest and well-being provided the appropriate ceremonies are held, which usually consist of dramatised dances where they represent the personality of each Kachina making use of colourful masks.Many of these dances are carried out around a bonfire, in an environment with great fervour, music and fun due to its double meaning: religious and social. These dances display the kindness of this village towards Mother Nature.These are happy days for the younger generations of Hopi, because the Kachinas will provide large quantities of corn, beans, melons and peaches, and as a gift for the younger people, the Hopi carve the KACHINA dolls that are handed down to the children for them to familiarise themselves with the many Kachinas and lean about life matters.Each Kachina has its own name and it is said that there are approximately 300 to 400 Kachinas.

Source : www. ind ioshopi .com

27

R.O.P.TM

Return On PressureLayer Construction

27

HemisThe Hemis comes from the Arizona Plains, inspired by the Hoppi Katsina. A piece of history in our top-of-the-range Longboard in the Carver series! Its board with 2 plies of bamboo + 1 ply of zebra-strand bamboo + 2 plies of fibreglass plus Seismic wheels will take you as far as you wish. Specially designed for carving, thanks to its energy return. Feel the Hoppi spirit run through your veins!

TawaThe Supreme God, the God of the Sun of the Hopi Indians. The Tawa model is a Longboard conceived to make the most of all the turns. Thanks to its 2 plies of bamboo + fibreglass + vertical bamboo, you will have a return energy that to accelerate the skate on each turn when you carve. Assured stability and added dropthrough system. Perfect for carving, pumping, cruising…

Length: 38” Width: 9,5” Wheelbase: 26,53” Wood: 3 x plies bamboo,2 x plies fiberglassGrip: High performance transparent Trucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Seismic Hot Spot 70mm, 81a

Length: 38,27” Width: 9,2” Wheelbase: 28,16” Wood: 3 x plies Bamboo2 x plies fiberglassGrip: High performance transparent Trucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

Technical features

Hemis

Tawa

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING


HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH

Hemis Tawa

100%BAMBOO

ABEC 7CHROME STEEL

BEARINGS

SEISMICHOT SPOT

EXTRA-LIGHTCONCAVE

HPTRANSPARENT

GRIP

TWO PLIESFIBERGLASS

SQUAREDEDGE

100%BAMBOO

ABEC 7CHROME STEEL

BEARINGS

CREEK70MM / 80A

EXTRA-LIGHTCONCAVE

HPTRANSPARENT

GRIP

TWO PLIESFIBERGLASS

SQUAREDEDGE

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING

FREESTYLESERIES

Freestyle is a modality where everything makes sense, regardless of the trick you perform or how you use your longboard. Let your imagination

fly... Flat tricks, dancing, carving... Feel the freedom with no limits. No pre-set rules, just those you create yourself.

Photo: Toni 3sesenta

29

Cytrus 41”The dropthrough family grows! We have used the new and most versatile freestyle forms and measurements in this new model: twin tip, medium concave, dropthrough system... A perfect longboard for practically anything thanks to its added stability! Slide with an acid touch!

Cytrus 38” With the same shape as the Cytrus 41” but in 38”. Dropthrough, medium concave. An all-terrain with stability and very maneuverable. Perfect for the smallest riders and for girls.

Length: 41” Width: 9” Wheelbase: 30,8” Wood: 8 x plies 100% Canadian MapleGriptape: High qualityTrucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

Length: 38,2” Width: 8,76” Wheelbase: 28,16” Wood: 8 x plies 100% Canadian MapleGriptape: High qualityTrucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

Technical features

Cytrus 41

Cytrus 38CARVING

SLIDE DANCING

FREESTYLEFREERIDE

DOWNHILL PUMPING CRUISING

HHHHHHHHHHHHHHHHHHHHHHHHHHH

100%CANADIAN

MAPLE

HIGHQUALITY

GRIPTAPE

ABEC 7CHROME STEEL

BEARINGS

MEDIUMCONCAVE

CREEK70MM / 80A

COLOUREDPLY

SQUAREDEDGE

30

HeimdallFrom the faraway lands of the north, the Heimdall is a longboard similar in technical features to the Park Stickers 41”. Twin-tip shape, dropthrough system, countersink trucks, medium concave and round square edges. In short, a Longboard for everything!

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING


Palm Beach& NativeA combination of technical features makes the Palm Beach and Native one of the most versatile and manoeuvrable longboards around. Let your imagination loose on any terrain and modality thanks to its dropthrough system and 38”. Freestyle, carving, cruising, freeride.. . You name it!

Length: 41” Width: 9” Wheelbase: 30,8” Wood: 8 x plies 100% Canadian MapleGrip: High performanceTrucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

Length: 38,2” Width: 8,76” Wheelbase: 28,16” Wood: 8 x plies 100% Canadian MapleGrip: High performanceTrucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

Technical features

Heimdall

Native & Palm Beach

100%CANADIAN

MAPLE

MEDIUMCONCAVE

HIGHPERFORMANCE

GRIP

ABEC 7CHROME STEEL

BEARINGS

CREEK70MM / 80A

COLOUREDPLY

SQUAREDEDGE

31

32

33

Travel Stickers41” & 38”The most versatile longboard of the range. Dropthrough, medium concave, Canadian maple, medium flex. If you are looking for fun, this is your longboard. Freestyle, carving, freeride, slide.. Available in 41” and 38”

Travel Stickers 41 Length: 41” Width: 9” Wheelbase: 30,8”

Travel Stickers 38 Length: 38,2” Width: 8,76” Wheelbase: 28,16”

Wood: 8 x plies100% Canadian MapleGriptape: High qualityTrucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

Technical features

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING


100%CANADIAN

MAPLE

MEDIUMCONCAVE

HIGHPERFORMANCE

GRIP

ABEC 7CHROME STEEL

BEARINGS

CREEK70MM / 80A

COLOUREDPLY

SQUAREDEDGE

Length: 38,27” Width: 9,2” Wheelbase: 28,16” Wood: 3 x plies Bamboo2 x plies fiberglassGrip: Transparent thick sandTrucks: Miller reverse high quality steel 180 mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

Technical features

PhysisFinally here we have the expected Physis Miller! A vertically and horizontally laminated bamboo board with two layers of horizontal fiberglass. Lightweight and flexible! Perfect for carving, pumping and cruising.

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING


SQUAREDEDGE

100%BAMBOO

ABEC 7CHROME STEEL

BEARINGS

CREEK70MM/ 80A

EXTRA-LIGHTCONCAVE

TRANSPARENTTHICK SAND

GRIP

TWO PLIESFIBERGLASS

R.O.P.TM

Return On PressureLayer Construction

34

100%CANADIAN

MAPLE

HIGHQUALITY

GRIPTAPE

ABEC 7CHROME STEEL

BEARINGS

MEDIUMCONCAVE

CREEK70MM / 80A

COLOUREDPLY

ROUNDSQUARE

EDGE

Dropthrough, medium concave, double kick, 40 inches... Skating has never been so easy! If you love freestyle, here is the perfect quiver for you! ! Choose between three designs and let your imagination fly! ! Wheelies, flips, combos....

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING


Length: 39,5” Width: 9,3” Wheelbase: 28,16” Wood: 8 x plies100% Canadian MapleGriptape: High qualityTrucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

Technical features

Road

Trip

Shib

uya H

eadq

uart

ers

35

CARVING SLIDE

DANCING FREESTYLE

36

37

Malibu & CommanderLongboard surf? Longboard skate? You will not know whether you are in the water or on the asphalt until you look down... A perfect longboard for those that want to do freestyle in the purest form!Double kick, medium concave, topmount system and its 41” are perfect for freestyling, dancing, carving...

CARVING SLIDE

DANCING FREESTYLE

FREERIDEDOWNHILL

PUMPING CRUISING

HHHHHHHHHHHHHHHHH

HHHHHHHHHHHHHH

Length: 41” Width: 9,14” Wheelbase: 28,18” Wood: 8 x plies 100% Canadian MapleGrip: High performanceTrucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Creek 70mm, 80a

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING


Technical features

TatankaThe great Tatanka! The Indians loved, respected and admired it! It is said that they came to take their last breath as a form of absorbing its virtues spiritually. The Tatanka is a Longboard for everything! Freestyle, freeride, downhill, carving, dancing... Double kick, double concave, twin tip, micro dropped lowered and wheel wells included in the shape. Without a doubt, this Miller Longboard has the most complete board of the entire collection!


Technical features

100%CANADIAN

MAPLE

HIGHPERFORMANCE

GRIP

ABEC 7CHROME STEEL

BEARINGS

CREEK70MM / 80A

COLOUREDPLY

DOUBLECONCAVE

ROUNDSQUARE

EDGE

100%CANADIAN

MAPLE

HIGHPERFORMANCE

GRIP

ABEC 7CHROME STEEL

BEARINGS

CREEK70MM / 80A

COLOUREDPLY

ROUNDSQUARE

EDGE

MEDIUMCONCAVE

38

FREERIDESERIES

Slopes, speed and slides are all synonyms of freeride. Specific longboards to bear the speed better than any other. Are you one of the

chosen ones? Now, find yourself a slope and get your heart racing!

39

Length: 36,31” Width: 9,75” Wheelbase: 25,12” Wood: 8 x plies 100% Canadian MapleGrip: High performance transparentTrucks: Miller reverse high quality Steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Seismic Hot Spot 70mm 81a

Technical features

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING


SpeedwayDouble concave, micro dropped lowered, tail, wheel wells included in the shape... The perfect machine for freeride and downhill! You will place your feet on it without even looking

at it. The stability and comfort will let you slide like you never thought possible. All this combined with its seismic wheels make it the star of the Freeride and Downhill range!

100%CANADIAN

MAPLE

HIGHPERFORMANCE

GRIP

ABEC 7CHROME STEEL

BEARINGS

SEISMICHOT SPOT

COLOUREDPLY

DOUBLECONCAVE

ROUNDSQUARE

EDGE

40

SoulThe soul of the sea, of the waves, the wind, freedom... A design inspired by the artisan technique of surfboards with authentic souls! A Longboard with added width, a top mount, light concave and with a tail. It will be one of the best options for any situation! Carving, street and, above all, for freeride and downhill!


Technical features

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING


100%CANADIAN

MAPLE

HIGHPERFORMANCE

GRIP

ABEC 7CHROME STEEL

BEARINGS

CREEK70MM / 80A

COLOUREDPLY

ROUNDSQUARE

EDGE

MEDIUMCONCAVE

DaytonaThe Daytona is surprising for its improvements: double kick, drop through, drop lowered, double concave,

Seismic wheels... You can use it for any mode: carving, freestyle, slide, freeride and even downhill.

Length: 40,6” Width: 9,78” Wheelbase: 30,43” Wood: 8 x plies 100% Canadian MapleGriptape: High qualityTrucks: Miller reverse high quality steel 180mmHardware: AllenBearings: Abec 7 Chrome steelWheels: Seismic Hot Spot 70mm, 81a

Technical features

100%CANADIAN

MAPLE

HIGHQUALITY

GRIPTAPE

ABEC 7CHROME STEEL

BEARINGS

SEISMICHOT SPOT70MM/ 81A

COLOUREDPLIES

DOUBLECONCAVE

SQUAREDEDGE

CARVING SLIDE

DANCING FREESTYLE

FREERIDE DOWNHILL

PUMPING CRUISING


41

Photo: Aaron Lemon Fresh

42

PROTECTIVEGEAR

&HARDWARE

43

Slide/FreerideGloves

•High quality goat leather •High density PU puck •Double reinforcement layer on fingers•Micro-drilled leather on the back•Ultra breathable

•Slim fit•Anti-impact 3mm foam on palm •Velcro closure•Very flexible, safe and comfortable

Protect your hands when you skate. At Miller, we have developed two new ranges of gloves that meet our requirements for quality, design and performance. The first, made of nylon, neoprene and leather with pucks on the palms and fingers, is specially designed for freeride and slide, while the second, more technical, is designed in high-quality goat leather and has pucks on the palm, for freeride and downhill. Security at your fingertips!

•Anti-impact 3mm foam on palm •High density PU bar and puck •Edge and clamp exterior reinforced•Slim fit·Available in two colours

Freeride

Freeride Advantage

Navy

Turquoise

Brown

Pink

44

Downhill, freeride, freestyle, carving, slalom, cruising... No matter the mode. Skate safely and protect your ideas! At Miller we have created a range of helmets, in which the safety and design are one: the outside in high-quality ABS and

finished with rubber; inside, in interchangeable and washable towel liner; straps in white, and anti-chafe protection for the chin. Safety and style with Miller!

Pro-Helmet

Highperformance

ABS

Ultrabreathable

Superlightweight

Low fitpro design

Multi-impactdesign

TurquoiseNavy Pink

Pro-Helmet II

Orange

From the skatepark to the hills, safety is our main concern. That is why at Miller, we have developed a helmet with a safety certificate. A perfect combination of protection, shape and style. Don’t let anything stop you from skating safely!Dually certified by the UNE-EN 1078 for both skateboards and bikes

Exterior very resistant ABS, extra ventilation and a matte finish.Built with EPS liner inside.It has a removable system with a wheel to adjust the helmet to the perimeter of your skull.Interior padding, extra comfort.Anti-chafe protection for the chin.

BlackWhite

45

Skateboard Wheels

Features

Skateboards wheels. Available in 53 mm 100a and 54 mm 99aSHR Premium formula

Knee &Elbow pads

•Ergonomically designed for confort•Anatomically constructed for best fit•Compact knee and elbow pad with high density contoured EVA foam •Impact resistant polyethylene caps securely attached with rienforced rivet •Neoprene and velcro clousure for easy entry•Available sizes: S, M, L and Kids

Rider Pack

Hardware All parts of a skate and a longboard are important, even the small ones! That is why we incorporate a new range of hardware.

Bearings

Features

Available in abec 5 and abec 7Spacers includedChrome Steel ballsNylon bearing retainers

Chrome Steel 22 mm outer racers and 8 mm inner racersFast and resistant to impacts

Hardware

Features

Available in 7/8”, 1” and 1.25”Philips headHigh grade tempered alloy

steel boltsHold fast nylon lock tight

T-tool

Features

FEATURES:9/16” TRUCKS (14 mm)½” WHEELS (13 mm)3/8” HARDWARE (10 mm)Phillips and Allen key

A multi function 5 in 1 skateboard tool made in a tough plastic construction with everything you could possibly need to assemble

46

BACKPACKCOLLECTION

At Miller, we know that each day is an adventure: the city, beach or mountain, surfing or trudging the streets, at school or work... Always from one place to another... In constant movement...

The new Miller Backpack Collection develops a concept of backpack inspired by retro-mountain, nature, timeless colours and simple forms; versatile and functional, just what you need, with a touch of style and ease... But caring for the even the smallest of details.

47

Print Series Dress your back with the coolest prints!

Store your computer securely in its

purpose-made inner pocket. Set the

style wherever you go!

Trop

ical H

eat

Coo

rdin

ates

Composition•Outer fabric: 900D polyester, PU coating, 300gr/m2 •Lining: 100% polyester

48

Simple and versatile. This is what the

new Miller bags are like. With a casual

style and super versatile. Space for a

laptop and an outer pocket with extra

capacity. Move like you’ve never moved

before with the usual colours!

Classic Series

Top-

Clas

s

Endl

ess

Sum

mer

Vars

ity


Photo: M.B.

NationalParks

50

51

NationalParks

Inspired and in homage to the

American National Parks that celebrate

their 100 anniversary this year. For

them, the past and the present have

never been so united in caring for nature.

Like all models of Miller backpacks, it

includes a space for a laptop.

Sierra With the Sierra model, there will be

no day that won’t resist it. A super

breathable back, space for your laptop

and a compartment for your glasses.

The backpack that will accompany you

in any situation.

Composition•Outer fabric: 900D polyeste, PU coating, 300gr/m2 •Lining: 100% polyester


Over 15”Laptop Pocket

15”Breathable MeshShoulder Straps

and back

22L VolumeCapacity

22L

Fully Lined30*14.5*46cmSize

52

Broker You no longer have an excuse to not go

to the office with your characteristic

style! Be organised thanks to its multiple

compartments, space for your laptop,

documents, etc. Discretion and style on

your back!


Simple and versatile. This is what the

new Miller bags are like. With a casual

style and super versatile. Space for a

laptop and an outer pocket with extra

capacity. Move like you’ve never moved

before with the usual colours!

Lake

Composition•Outer fabric: 900D polyester, PU coating, 300gr/m2 •Lining: 100% polyester Over 15”

Laptop Pocket

15”Breathable Mesh 20L

Capacity

20L

Fully Lined30*16*45cmSize

Finesttote bag

53

The new Miller bag! Take

whatever you need without

losing your style.

Have your personal objects

readily accessible at all times.

26 x 17 cm.

Multipurpose cases



Finesttote bag

Miller DivisionPol. Ind. Barros, 29 · 39408 Barros, Cantabria, Spain

[email protected]

SEE YOUSOON

55

MILLER FREERIDE "A" TEAM

Santos Múgica Gil“ Santos” · 29/06/1983 · Cantabria · He lives in Barcelona · 6 years

skating · He has competed in Maryhill · Lover of his home

land spots · A usual face in the Eurotour · Board: MILLER PRO

MODEL

Fabrizio Clausi“Fabri” · 30/06/1998 · Altea · 7 years skating · He participates in

the EUROTOUR · He stakes in the Alicante mountains · Board:

MILLER PRO MODEL · Favourite spot: Mijas

D. Derek Blanker“Derek” · 06/01/1982 · Benidorm · Team Manager at MILLER

DIVISION · 4 years skating · Lover of the Alicante spots · He

participates in the EUROTOUR · Board: MILLER DIVISION

prototype deck

Israel Cameselle Esperón“Irra”· 16/12/1978 · Vigo · 4 years skating · He skates all over Galicia·

Favourite spots: Noia, Inferno · Board: MILLER PRO MODEL · He

participates in the EUROTOUR · He organizes the “O’Inferno” Freeride

56

A spectacular circuit, both for its perfect surface

and slope inclination, and its bends, as if

carefully traced with a drawing pen, like those

of a real F1 circuit!

5656

The weather in the North of Spain is very unpredictable in spring and the clouds threatened to linger for quite a long time during the last week of April. However, the weather changed on the 2nd of May, enabling over 100 Riders from all over Spain to enjoy a weekend jam-

packed with Freerides and Downhills.

This was the beginning of the “1st Miller Division Freeride - El Soplao”, one of the most cherished projects of the Cantabrian brand, born from the experience during the past three years, in the sponsorship and collaboration of Freerides in Europe.

Where did it take place? There was no doubt about it: the new La Florida-El Soplao road, which leads to the famous El Soplao cave. Discovered at the beginning of the twentieth century with the mining industry of La Floica, it is considered one of the major wonders of geology, attracting thousands of visitors each year.A spectacular circuit, both for its perfect surface and slope inclination, and

5757

its bends, as if carefully traced with a drawing pen, like those of a real F1 circuit! With all the safety measures (2 ambulances, inspectors on each bend, a race director, extra straw bales on the entire circuit, etc.) and, of course, a fast way back up (2 buses) which made the countless descents much faster.

The first descents began on Saturday morning. Some areas were wet at the beginning but gave way to dry asphalt shortly after. For many, this was an unknown spot, but for others a very frequented place. For Fede and Santos Múgica (Race Director and a Miller Rider), this is their perfect spot.

Unlike everything else in Freerides and Downhills, the organisation decided not to stop for breaks at midday, nor while getting back up or during descents; (completely non-stop!) so, the circuit was open all day and the riders were able to descend and rest whenever they pleased, which was great for them.

The first eliminating rounds began in the afternoon, because, in addition to Freeride, there was also a two-leg race. People crowded around to see the riders on each bend, but, above all, on bend 3, where they arrived at full speed and where there was bound to be a show.

On Sunday, the circuit also awaited with dry asphalt and a special warmth. Above all, the road was really looking forward to receiving the riders and visitors again, of enjoying the amazing descents again and the most awaited finals.

The classification, after super-fast legs, was the following: 1º Javier Tato, 2º Adria Arquimbau, 3º Alfred Cano Bipo.

In short, an unbeatable weekend, where all the riders ended up exhausted from skating in a spectacular circuit, which everyone ended up falling in love with, until their legs could do no more. We would like to congratulate the Race Director, Santos Múgica and Enrique Becerril for all their effort and dedication and, of course all the riders for raising the bar so much and the audience that cheered and warmed the event.

Check our Facebook page for the 2016 dates! ! ! See you at the next event!

I MILLERDIVISIONFREERIDEEl SoplaoBy Iván García Arozamena

MISCHO ERBANThe fastest man in the world!

Mischo was born in Prague in the Czech Republic. From there, he moved to Austria and then Canada, which is where he lives now. Behind the man holding the world speed record on a longboard, 130,08 Km/h., there is a friendly, healthy and modest person, full of hopeful

anticipation. We had the opportunity to meet him in Munich a couple of years ago and since then, we have always wanted to know more about the fastest man on earth.

You spent your childhood between several countries… When a child goes through an experience like this it changes his life. When and where did you start skating?

I owned a skateboard when I was young but never really used it other than to push myself around on one knee. It wasn’t until I was in university that I needed a convenient form of transport to get from class to class. It was then when I bought my first longboard. You could say that moving to Vernon, BC was the pivotal ingredient to fuelling my downhill career. If Silver Star Rd hadn’t been literally on my doorstep, I don’t think I would have become the rider that I ended up becoming. I could hitch-hike up the road as often as I liked… I definitely put in a lot of hours into that road!

Competition is something that is always inside the human being. When did you feel the desire to start competing in the skate world?

I didn’t feel the need to compete until after the first race that I entered. That is also when I got the desire to organise my own event for the benefit of others. Jody “Shnitzel” Wilcock was the person responsible for convincing me to enter The Attack of Danger Bay 3 which was the first race I took part in. It definitely set me on a path I didn’t expect.

We strongly believe that there is a great backstory behind the decision to go for the Guinness Record. We´d really like to know all about it!

I think it’s the best story ever! The story of “why not?!” It’s the same impetus behind my decision to beat downhill, to race, to travel and definitely to do the record. It was just natural to go for it considering the last record was well overdue and needed to be broken in order to reflect the current potential of downhill skateboarding. I simply acted on an idea, but that being said it wouldn’t have been possible without Recon Instruments who I am greatly indebted to for believing in my dream and me, and making it happen!

Can you remind us the name of the road where you got the Guinness

59

Record? Why did you choose that place precisely? Is this choice the result of a deep meditation or did you simply feel that it was “the road”?

I chose the road at Les Éboulement because it was a proven record setting road by the streetluge trio The Three Bobs. They set the streetluge record at a blistering 157.41 km/h with Bob Touchette taking the golden run. The road is safe and has a beautiful setting, overlooking the St. Lawrence River just and hour and a half away from Québec City.

Regarding the technical details, did you decide your set-up, wheels and axles to skate as fast? Did it take many trials before going straight for the Guinness Record?

There wasn’t much thinking really. I just went with the same setup that I had already used for top speed in Colorado. I suppose I could have tested some more but I knew it was a solid setup. I think

the next time I do another gravity record I would love to do it on a top mount.

We´re really interested in your feelings... Rolling at 130 Km/h…Do you have time to think about anything or is your mind full of adrenaline?

The first runs are definitely filled with some adrenaline but the more you do the same run over and over again that excitement fades away and turns into time to focus and process your body position and all the ways you can squeeze out more speed. This all becomes futile after a while and you simply have to accept the given speed cap for the given parameters at play. It is wishful thinking that one day a road will be paved longer and steeper than what is currently out there.

Is there any place you like to go or where you “hide” before an event of this kind? Do you need concentration or do you prefer to be with your friends and family? Tell us how you prepare yourself.

There’s no need to hide! I just try to ride as often as possible and I had spent a lot of time riding Silver Star Rd before the event. Just be active and in shape and try not to stress. It’s just a run down a steep road… one that makes you smile a lot! ;)

Surely some of our readers are considering obtaining a Guinness Record... What do you recommend?

Depends on where, when and what. The Guinness World Records website has all the information you need to attempt a record and to what extent you want their involvement. If you still have more questions, you can email them for more help. It’s rather simple if you get one of their representatives to be present at your event but be prepared to pay a lot more than you expect. You can always do it on a low budget with a lower cost, but if you go down this route, be prepared to do a lot more documentation work and verification of data and results. That all gets submitted to GWR for them to verify and approve your attempt. This all takes time. In the end, you get what you pay for.

Finally, we would like to know something about your new RG on an electric longboard. What can you tell us about this?

Next Generation Vehicles asked me to test their NEXTboard in May 2015 and I was hooked on the potential it had, especially when they told me how fast they wanted to take this board. We talked about setting a record and we ended up doing that in the fall. The new electric skateboard record was set at 95.83 km/h! A little bit slower than we had hoped for but there are still some obstacles that need to be overcome and I think we will be ready for another attempt in 2016. I can’t wait to have another chance!

Thanks a lot Mischo, we are delighted to have you share your experiences with us. We really hope you continue inspiring riders as much –or more- than you´re doing now.

Thank you very much! Skate safe, skate fast!

Your skateboard. Your rules. Your style

626262

Born on the 19th of November 1980 in Santander, based in Madrid since 2000 and a graduate in Fine Arts at the Complutense University of Madrid. His works on railway tracks and abandoned factories of his hometown were clearly recognisable from his beginnings in 1997. In parallel to his street works, Okuda also began to produce more intimate works in his study, with which he evolved towards a more personal path from 2009 onwards.

Geometric structures and multi-coloured print are combined with grey bodies and organic forms in artistic pieces that could well be catalogued as Pop Surrealism with a clear street essence. His works often pose contradictions on existentialism, the universe, infinity, the meaning of life and the false freedom of capitalism, and they display a clear conflict between modernity and our roots; in short, between the human being and him himself.

His works of arts can be seen in the streets and galleries of all over the world: India, Mali, Mozambique, United States, Japan, Chile, Brazil, Peru, South Africa, Mexico and the entire European continent.

Perhaps this is the most asked question in artists’ interviews, but it has to be asked all the same: Are artists born or created? Was Okuda born with his art or was it developed throughout his life and experiences?The artist is born, but with discipline, full dedication and self-belief, one grows bigger and better.

When you first start to create art, it was on railway tracks, abandoned places... What was your “first-time” like? What did you feel? It was simply a game. I didn’t have such a strong feeling for everything I did as I do now. I was always out in the street and I was always drawing. It was obvious and natural to do it in

With the limited series Yee Ha

Skateboard “KAOS STAR by

OKUDA”, inspired by the KAOS

TEMPLE, Miller Division, by

the hand of IAM GALLERY, is

committed to opening a new

space for artistic expression in

his collections, incorporating

unique pieces where art and

skate combine as never before.

~ Okuda ~Kaos Temple or the

“Sistine Chapel of Skate”

Photos : E l Ch ino Pomares

6363

the street too. Even through the feeling you get when you see your name written in different and unique forms, in many places, was very special. And perhaps that was what motivated me never to stop.

What goes through your mind when your works of art no longer decorate an abandoned factory in Santander, but streets all over the world?Well, I am nobody, nothing is too good, and I still have thousands of countries and cultures to capture my soul, my fingerprint and from which to absorb the experiences, people and places. No limits in the sky…

From all the places you have created works of art, which one is your favourite? Which is most special to you?Perhaps before the church, I had several things that I am proud of: my Kaos Star sculpture located permanently in Gorky Park, Moscow, for Artmossphere in 2014. The fountain I painted for the Bonnarroo Festival in 2013 in Tennessee, or my largest work, the 16-floor building I did last September in Kiev.

Kaos Temple. How does this project reach you? How did the idea come up?The magic of the Internet... I see Isma, my friend, on Facebook, who is a friend of the guys that manage the space, the Church Brigade, and it was at that instant when I fell in love with the place without even having seen it in person.

With this project, you say you want to change the History of Art and after seeing the result, how do you think you achieved it?It’s not me that says it; it was simply a strong statement, not too far from reality, that we use to strengthen our crowdfunding. At the end, I think we have united worlds and to a certain extent, we have also changed history a little, because a street artist goes inside to paint one of the most classic elements of History of Art.

The Kaos Temple is The Skate Church. What is your motivation for this sport? Do you practice it now or have you done in the past? What modality?I practised it every day until I was 15, because due to my parents working in the hospitality sector, my brothers and I were always on the streets of my neighbourhood.

Could this be a way of making a reference to fond memories on top of a skate? Is there something romantic or nostalgic in this?Yes, to a certain extent, the fact that the church has the supplement of a skate makes it even more perfect and nostalgic for me, of course.

I guess the idea of making a limited series of a skateboard board came to you fast, what is the story behind it?Within our crowdfunding, created with my Ink and Movement team, the first element that came to us and that the space itself warranted was a skate board. As well as a series of stained glass windows, silk-screen printing, books... Incidentally, I need to thank Red Bull, Montana Colors, Socketines and Miller Division for their sponsorship and support in this project.

What is the next artistic challenge you have in mind?Well, I have scheduled many projects for next year, such as attend the Art Beijing, China; several murals/buildings with the Jew Holocaust theme in Hungary, Bulgaria and Romania; and I hope to go to Australia this year too. In general, my intention is to continue growing and producing at this rhythm and this level... Don’t stop...I invite you all to follow me on my diary / Instagram @okudart

+++ Love & thx to everyone +++

© Miller Division 2016

millerwww.millerdivision.com

Date post:	25-Jul-2016
Category:	Documents
Upload:	miller-division
View:	217 times
Download:	2 times

The Daily Miller 2016

Documents