Product NewsTHE DRAG SPECIALTIES FEBRUARY 2019
1 +49 (0) 6501 96 95 -2000 • partseurope.eu
PRO PIPE 2-INTO-1 EXHAUST SYSTEMS• Includes tuned length stepped headers
with a highly efficient merge collector that feeds into the stepped 41/2” megaphone design
• Complete with header and collector heat shields, as well as a shield over the first step of the megaphone muffler body
• CNC-machined chrome-plated billet end cap
• Flat plane mounting panel for 12 mm O2 sensors; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
• Available in chrome or matte black finishNOTE: Not for Softail models with
Heritage-style saddlebags.
PART # DESCRIPTIONFOR 18-19 FLFB/ FXBR MODELS1800-2384 Black1800-2383 Chrome
SLASH-CUT MUFFLERS• Classic slash-cut styling• Boosts horsepower and torque• Removable dB reducer• SAE J2825 Sound Level Compliant• Sold in pairs
PART # DESCRIPTIONFOR 18-19 FXBB, FXLR, FXBR, FLFB, FLSL MODELS1801-13511 Black ceramic1801-13542 Black ceramic1801-13521 Chrome1801-13552 ChromeFOR 18-19 FLHC, FLDE MODELS1801-13531 Chrome1801-13562 Chrome1 With catalytic converters.2 Race only.
1801-1354
1801-1356
1800-2384
1800-2383
2 +49 (0) 6501 96 95 -2000 • partseurope.eu
Product NewsTHE DRAG SPECIALTIES
FEBRUARY 2019
WHOLE HOG 900 WATT AMP/ SPEAKER KIT • Complete 900 watt/6 speaker kit• Designed to work with factory
charging system – no upgrade required
• Includes fairing speakers, rear speakers, and 6,5” speakers with adapters for the fairing lower glove boxes
• Speaker adapters for fairing lower glove boxes give simple access to factory coolant tank
• Main portion of lower speaker adapter is gloss black to match factory inner fairing
• Includes Wild Boar Audio amp with special mounting plate (see note)
• All amps fit inside fairing, are bolt-in and 100% plug-and-play
• Amplifiers feature R.E.M.I.T Technology for excellent FM reception from a Class D amp
• Kit comes complete with all wiring and hardware to complete the installation
Note: A radio reflash may be required for best performance.
Note: Requires removal of CB module, if equipped.
PART # DESCRIPTION4405-0534 For 14-19 FLHTK/ FLHTCUTG models
LOWER SPEAKER AMP KIT • Features a plug-and-play, 300-watt
2-channel amplifier• Wild Boar Audio 6,5” 4-ohm speakers• R.E.M.I.T. technology for excellent FM
reception from a Class D amp• Includes side plate to mount amp
inside fairing• Includes adapters to properly mount
speakers in lowers• Easily added to bikes with Wild Boar Ultra
Kit (PART #4405-0499) already installedNOTE: A radio reflash may be required.NOTE: Requires removal of CB module
on FLH models (if equipped).
PART # DESCRIPTION4405-0533 For 14-19 FLHTK models
HOGTUNESHogtunes audio products are designed first and foremost for motorcyclists! All of their products are designed to deliver the ultimate listening experience when on the bike. From a long-distance cruise to cranking out the tunes at a local bike night, Hogtunes products has the audio setup that is right for you and your bike. And every product is manufactured to the highest quality standards so it will perform for years down the road.
3 +49 (0) 6501 96 95 -2000 • partseurope.eu
Product NewsTHE DRAG SPECIALTIES
FEBRUARY 2019
PERFORMANCE SERIES 200W AUDIO KITS• Kit includes 200W amplifier and two
7,5” waterproof fairing speakers• Speakers feature 140W max power, 100W RMS and
2-ohm impedance• Amplifier is a 2-channel at 100W each, 200W total • Amp mounts into custom bracket system with slots to relocate
two feature modules such as CB, MP3, or satellite radio• Amp measures 61/2” x 43/4” x 13/4”
PERFORMANCE SERIES 200W AMP KIT• Full-range class D amplifier• Fully shielded from AM and FM radio interference• 2 channels at 100W RMS per channel (200W total)• Plug-n-play wiring harness• Amplifier measures 61/2” X 43/4” x 13/4”
PART # DESCRIPTION4405-0525 For 06-13 FLHX/ FLHT
PART # DESCRIPTION4405-0526 For 06-13 FLTR
PART # DESCRIPTION4405-0524 For 98-13 FLHT/ FLHX/ FLTR
4405-0526
4405-0525
4405-0525
4 +49 (0) 6501 96 95 -2000 • partseurope.eu
Product NewsTHE DRAG SPECIALTIES
FEBRUARY 2019
EXFIL-48 BACKPACK• Designed by riders, for riders and packed with
moto-centric features• Bottom outside pouch folds out to reveal
two rugged zipper compartments and wrench pockets
• Vertical compression straps keep things from bouncing around, secure the bag to luggage racks and can be used to add a bedroll or jacket to the outside of the bag
• Two large internal pockets that can be rolled up when not in use to increase interior volume
• Main interior compartment has a padded laptop sleeve with elastic retainers
• Top outer pouch has a fleece-lined pocket for delicate objects like glasses or a phone
• Center compression straps cinch to reduce bulk and shifting while riding
• Holds up to 48 355ml (12 US fluid ounce) cans
• Features ventilated mesh material over molded Bio-Foam inserts to allow for airflow
• Bottom portion of the bag is PVC-coated for water-resistance and easier clean up
• Constructed from 1600-denier/ PVC outer shell with high-viz orange interior lining
• Dimensions: 29 cm W x 25,5 cm D x 45,5 cm T (111/2” x 10” x 18”)
LUGGAGE RACK FOR COBRA SISSY BARS• Bolt-on a strong and good looking luggage rack to
an existing Cobra sissy bar• Rack platform is made from sturdy steel and
designed to bolt-on in minutes• Available in chrome or black powder-coat finish
DETACHABLE SQUARE BACKREST KITS• A detachable backrest offers the best of both
worlds for your passenger• The convenience of a comfortable back
support for your passenger, with the ability to quickly remove
• Each is bike-specific and arrives with mounting hardware, bar, and pad
• Does NOT require the relocation of turn signals
• Optional luggage rack bolts directly to backrest see the 2019 Parts Europe FatBook catalog
• Available in chrome and black
PART # DESCRIPTIONFOR 18-19 FLFB/ FLFBS/ FXBR/ FXBRS MODELS1510-0415 Chrome1510-0416 Black
PART # DESCRIPTIONFOR 18-19 FLSB1501-0621 35,5 cm (14”) Chrome1501-0622 35,5 cm (14”) Black
1501-0621
1501-0622
1510-0415
1510-0416
PART # DESCRIPTION3517-0450 Exfil-48 backpack
5 +49 (0) 6501 96 95 -2000 • partseurope.eu
Product NewsTHE DRAG SPECIALTIES
FEBRUARY 2019
AIRHAWK BIGSEAT™ BACKREST SOLO SEAT• This is the next generation of the renowned Danny Gray Big Seat• Seat has two inflatable air cells in the driver’s portion• The Airhawk’s Comfort Seating System is now integrated into the seat• The results are the custom design and production capabilities of Danny Gray
with Airhawk’s clinician-approved Dry Floatation® technology• Airhawk’s patented system eliminates painful pressure points and is fully
customizable to each rider’s contour• Now, riders can enjoy the same benefits they’ve always known of Airhawk but
have them built into a revolutionary seat• With this patent-pending design, riders can also appreciate continuous
airflow through the seat, reducing heat build-up and keeping them cool and dry; no hot seat
• An integrated pump and relief valve make it possible to adjust the air pressure while seated
• Optional pillion pad and backrests (sold separately, see 2019 Parts Europe FatBook) provide additional comfort for any length ride
• Small backrests measure 23 cm W x 12,5 cm T (9” x 5”); large backrests measure 25,5 cm W x 20,5 cm T (10” x 8”)
SPEEDCRADLE™ SOLO SEAT• Designed for added stability and control in high-speed situations, heavy
crosswinds and turbulent environments• Seat pushes you down and forward approximately 51 mm (2”)• Pronounced rise at the seat tip helps to lock rider in saddle to mitigate torso
torque and loss of control
STEP-UP LS SEATS• Saddlemen has collaborated with top freestyle performers to create the new
T-sport inspired step-up lattice stitch (LS) seats• Infuse old-school lattice stitch retro styling with a modern twist• High lumbar keeps the rider locked into the seat• Feature Saddlemen’s Ultra-Foam which is formulated to provide a perfect
balance of rigidity and user compliance with integrated GelCore™ technology• Black or brown whisper-grain SaddleHyde™ covers• Installs easily with all necessary mounting hardware and instructions included
WIDE TRIPPER™ SOLO FRONT AND REAR SEATS• Seat design lets you ride low and still be comfortable• Cut narrow at nose for better ground reach• Detailed stitch work in the highly durable black, synthetic glove leather cover• Fully adjustable driver backrest is easily removable without tools• Marine-grade fiberglass baseplate
PART # DESCRIPTIONFOR 08-19 FLHT/ FLHR/ FLHX/ FLTR0801-1150 Double diamond stitch w/ charcoal gray thread
PART # DESCRIPTIONFOR 08-19 FLHT/ FLHR/ FLTR/ FLHX0801-1149 Double diamond stitch
PART # DESCRIPTIONFOR 04-05 FXD (EXCEPT FXDWG)0803-0607 Black0803-0608 Brown
PART # DESCRIPTIONFOR 18-19 FLDE/ FLHC0802-1078 Front w/ driver backrest; 32 cm (12,5”) W0802-1101 Rear; 25,5 cm (10”) W
0802-1078
0803-0607
0803-0608
0802-1101
6 +49 (0) 6501 96 95 -2000 • partseurope.eu
Product NewsTHE DRAG SPECIALTIES
FEBRUARY 2019
PREDATOR SEATS• Select seats have Solar-reflective leather in the seating area and automotive-
grade vinyl on the sides; patented process reduces surface temperature by as much as 14 °C (25 °F) for a cooler seat, higher durability and longer life over conventional leather or vinyl
• Custom-molded polyurethane foam for maximum comfort and styling• 5 mm (3/16”) ABS thermoformed seat base for a perfect fit• Rubber bumpers and fully carpeted bottom to protect paint• Fit with all Drag and most H-D sissy bars• Include all mounting hardware
SOLENOID END COVER/ STARTER BUTTONS• Constructed from aluminum with a chrome finish• Replaces the solenoid end cover and
includes mounting screws• Fits most 91-17 OEM and aftermarket
starter motors
38 MM (11/2”) “BIG” BUFFALO BARS• Handlebars for the “biggest fattest” look• Feature a full 38 mm (11/2”) diameter in the
clamping area (except T-Bars)• Custom bends for the ultimate in comfort• Slotted and notched for Throttle-By-
Wire applications• Designed for use with 96 and newer style
controls and master cylinders• Optional gauge mounts are available
separately for T-Bars; see the 2019 Parts Europe FatBook
NOTE: Accept heated grips and hydraulic clutch.
FENDER SKINS• Feature leather perimeters with a finished edge• Felt liner to protect paint• Include black zinc washer and screw to complete installation• Hugs fender perfectly• Designed to match Drag Specialties solo seats• Will work with most OEM and accessory solo seats
PART # DESCRIPTIONFOR 18-19 FXFB (72 CM L OVERALL X 30,5 CM W FRONT X 15 CM W REAR) (281/4” X 12” X 6”) 0802-11301 Smooth0802-11312 Smooth1 Automotive-grade vinyl.2 Solar-reflective leather.
PART # DESCRIPTION
2110-0978For 1,0, 2,0, 2,4 and 2,6kW starters
2110-0979 For 1,2 and 1,4kW starters2110-0980 For 1,6 and 1,8kW starters
CHROME DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACKFOR 96-19 MODELS (EXCEPT BELOW)0601-4325 30,5 cm (12”) Zero T-Bar 30,5 cm (12”) 63,5 cm (25”) 21,5 cm (8,5”) 0 cm (0”)0601-4326 35,5 cm (14”) Zero T-Bar 35,5 cm (14”) 63,5 cm (25”) 21,5 cm (8,5”) 0 cm (0”)FOR 15-19 FLTRX/ FLTRU0601-4324 25,5 cm (10”) T-Bar 25,5 cm (10”) 79 cm (31”) 21,5 cm (8,5”) 20,5 cm (8”)
PART # DESCRIPTIONFOR 18-19 SOFTAILS (35,5 CM L X 16,5 CM W) (14” X 61/4”)1405-0279 W/ smooth automotive-grade vinyl center1405-0280 W/ embossed faux gator leather center1405-0281 W/ flame stitch automotive-grade vinyl center
0601-4324
0601-4325
0802-1131
1405-0280
1405-0281
1405-0279
2110-0980
7 +49 (0) 6501 96 95 -2000 • partseurope.eu
Product NewsTHE DRAG SPECIALTIES
FEBRUARY 2019
V80 LONG-BLOCK ENGINE• Stock-height basic engine is a direct
bolt-in replacement for aging 80” H-D Big Twin Evolution engines
• Compatible with EFI• Does not include carb or ignition; use
stock or aftermarket carburetor and air cleaner
• 508 cam• Forged rocker arms
• 585 valve springs• 8,4:1 flat top cast pistons• S&S standard oil pump• S&S performance
replacement heads• 31/2” x 41/4” bore and stroke• Wrinkle black finish
CLARITY CAM COVERS• Allows for viewing of the internal moving engine components• CNC-machined from billet aluminum• Hardware included• Available with chrome, Contrast Cut™ and Black Ops™ finishes The RSD Clarity Cam Covers contain two pre-installed Lexan® polycarbonate
windows. These windows are very resistant to almost everything a motorcycle will be exposed to. However, extra care and preparation must be taken when
installing the cam cover near the exhaust system. The Lexan® polycarbonate windows must be at least 5/16” away from the exhaust pipe to insure the temperature does not exceed the capabilities of the Lexan®. Additional clearance is recommended to preserve the optical clarity of the Lexan® window as well as reducing the amount of heat introduced to the engine from the exhaust. Take measurements when installing the exhaust system and make sure that the exhaust NEVER contacts the Lexan® windows, bolts or the aluminum cam cover. Lexan® is very durable but it must be treated just like any plastic and cannot come into contact with the exhaust pipes. The Lexan® windows, just like any plastic, will melt if in direct contact with the exhaust pipe. If the Lexan® windows have less than adequate clearance premature discoloration, cracking or melting may occur causing severe failure and/or possible injury to the rider. RSD recommends the use of “high pipes” or exhaust that runs above the cam cover, which eliminates any potential exhaust contact.
TECHNICAL GUIDELINES FOR CLARITY CAM COVER:1. There must be at least 5/16” between the exhaust and
the Lexan® windows, bolts and cover.2. Absolutely no contact between the Lexan® windows,
bolts or aluminum cam cover. 3. Do not use brake cleaner, acetone or any harsh chemicals during installation.4. Use Plexus cleaner for cleaning. If any other cleaners are used,
read the label to verify compatibility with Lexan®.
V111 COMPLETE ENGINE• Complete engine includes ignition and Super E carburetor with teardrop air cleaner• Short stroke produces less vibration and longer engine life• Includes piston cooling jets and large cooling fins to increase cooling efficiency• HVHP (High Volume High Pressure) oil pump• 9,8:1 compression ratio• S&S 585 cam and lightweight single coil valve springs minimize valve train noise• S&S forged rocker arms• S&S Super Stock™ ignition system• Shorter than stock height engine makes installation easy• Natural finish engine includes chrome-plated rocker covers, air cleaner cover, oil
pump, gear cover, tappet blocks and pushrod tubes• Gloss black finish engine includes gloss black rocker covers, air cleaner cover, oil
pump, gear cover, tappet blocks and pushrod tubes
PART # DESCRIPTION
0901-0230 For 70-99 custom Big Twin chassis, with alternator-style primary
PART # DESCRIPTIONFOR 17-19 M-EIGHT MODELS0940-1729 Contrast Cut0940-1730 Chrome0940-1731 Black Ops
PART # DESCRIPTIONFOR 84-99 EVOLUTION BIG TWIN CHASSIS W/ CARBURETED ENGINE0901-0228 Natural finish0901-0229 Gloss black finish
0901-0228
0901-0229
CLARITY HYDRAULIC CLUTCH ACTUATORS• CNC-machined from
billet aluminum• Available in Black Ops™, Contrast
Cut™ and chrome finishes• Requires a master cylinder with
an 11/16” bore and requires custom hydraulic line (not included)
PART # DESCRIPTIONFOR 17-19 FLHT/ FLHR/ FLHX/ FLTRX MODELS1105-0230 Contrast Cut1105-0231 Chrome1105-0232 Black Ops
1105-0230
1105-0231
1105-0232
0940-17310940-1729 0940-1730
8 +49 (0) 6501 96 95 -2000 • partseurope.eu
Product NewsTHE DRAG SPECIALTIES
FEBRUARY 2019
TRACKER™ SERIES PISTON KITS• Forged piston crown with generous valve
pockets for big valves and cams• Precision-fit rings selected for each
application for ultimate sealing• Force-fed pin oiling provides
enhanced lubrication of the piston pin• Pressure seal groove reduces
ring lifting and power loss• ArmorGlide® skirt coating
reduces friction, providing quieter operation and improving scuff resistance
• Valued-packaged with two pistons, rings, piston pins and circlips
FINNED STARTER END ACCENTS• Cast-aluminum
construction, chrome or satin black and machined finishes
• Hassle-free tool-less installation using high-temp, automotive-grade 3M® VHB™ adhesive tape
• Styled to match the complete line of Kuryakyn Finned accessories
FINNED STARTER COVERS• Direct bolt-on replacement for the plain stock
Twin Cam starter end cover with classic finned styling• Cast from quality A380 aluminum• Available in chrome or satin black
and machined finishes• Looks great with Finned Transmission Cover Accents
and Finned Timing Covers, both sold separately
PART # DESCRIPTIONFOR 12-17 TWIN CAM 103 AND 07-13 TWIN CAM 96 BORED TO 1691CC (103 CU. IN.) VM-RING PACKAGE (10,5:1 COMP.)0903-15651 Std.0903-15661 0,010” 0903-15671 0,020” FOR 99-06 TWIN CAM 88 BORED TO 95 CU. IN. VM-RING PACKAGE (9,5:1 COMP.)0903-15581 Std.0903-15591 0,010”0903-15601 0,020”FOR 99-06 TWIN CAM 88 BORED TO 95 CU. IN. VM-RING PACKAGE (10,5:1 COMP.)0903-15611 Std.0903-15621 0,010”0903-15631 0,020”FOR 99-06 TWIN CAM 88/95 BORED TO 97 CU. IN. VM-RING PACKAGE (10,5:1 COMP.)0903-15641 Std.FOR 84-99 EVOLUTION 1340CC 80 CU. IN (FLAT TOP) X-RING PACKAGE (8,5:1 COMPRESSION/9,5:1 COMPRESSION W/ SCREAMIN’ EAGLE HEADS)0903-1576 Std.0903-1577 0,010”0903-1578 0,020”0903-1579 0,030”
PART # DESCRIPTIONFOR 84-99 EVOLUTION 1340CC 80 CU. IN (DOMED TOP) X-RING PACKAGE (10:1 COMPRESSION)0903-1580 Std.0903-1581 0,010”0903-1582 0,020”0903-1583 0,030”FOR 86-19 883 XL BORED TO 1200CC (REVERSE DOME) (9,5:1 COMP.) X-RING PACKAGE0903-15682 Std.0903-15692 0,010”0903-15702 0,020”0903-15712 0,030”FOR 86-19 883 XL BORED TO 1200CC (REVERSE DOME) (10:1 COMP.) X-RING PACKAGE0903-15722 Std. 0903-15732 0,010” 0903-15742 0,020” 0903-15752 0,030” 1 Requires Screamin’ Eagle module on fuel-injected models. 2 08-19 models will require the use of 1200cc cylinders.
PART # DESCRIPTIONFOR 17-19 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU AND H-D FL TRIKES2110-0947 Chrome2110-0948 Satin black and machined
PART # DESCRIPTIONFOR ALL 99-17 TWIN CAM MODELS2110-0949 Chrome2110-0950 Satin black and machined
2110-0948
2110-0947
2110-0950
2110-0949
9 +49 (0) 6501 96 95 -2000 • partseurope.eu
Product NewsTHE DRAG SPECIALTIES
FEBRUARY 2019
12-POINT CASE BOLT KIT• Quality 12-point hardened stainless steel bolts with a “SHOW”
corrosion-resistant finish• Feature precision-rolled threads for optimum engagement, to prevent galling
and promote more consistent torque loading• Wide underhead flange design provides even load distribution for optimum
sealing of surfaces – preventing leaks• Top engine builders demand quality fasteners! Secure your engine
with complete confidence• Eliminates thread problems associated with chromed hardware• Tensile strength rated @ 170.000 psi; superior and stronger than OEM and
stronger than grade 8 fasteners• Manufactured by ARP® to Feuling’s® exact specifications• Includes 14 case bolts and moly assembly lubricant for installation
51 MM (2”) FORK-MOUNTED LED DRIVING LIGHTS• Super-bright 3000 lumen output per light• Pure white light rated at 6000 Kelvin• Waterproof black light housings• Lights turn with steering for added visibility• Sold in pairs• Mounting hardware included
STATIC SEQUENTIAL SIGNAL MODULES• Allows three separate LED
lights installed on the rear of the bike to flash sequentially
• LEDs will also perform brake and running light functions
• Includes color-coded replacement rear fender harness and installation instructions
• Built-in load-equalizer prevents rapid flashing
• Static sequential flashing: When the turn signal button is pressed, the first LED will light up followed by the second and third before all three shut off and the sequence starts again
PART # DESCRIPTION2401-1055 For 18-19 Softail
PART # DESCRIPTION2001-1820 For 99-13 FLHT/ FLHX/ FLHR/ FLTRX/ FLTRU/ FLHXXX2001-1821 For 14-19 FLHT/ FLHX/ FLHR/ FLTRX/ FLTRU/ FLRT
PART # DESCRIPTIONSTATIC MODULES
2050-0304 For 97-13 HD models, 99-03 XL (except FXCW, 10-13 FLHX, FLTR)
2050-0305 For 10-13 FLHX/ FLTR Street and Road Glide models only2050-0306 For 09-13 FLH/ FLTRSE
STAR SERIES HANDGUARD LED TURN SIGNAL KIT • Super bright LED lights• White running light, amber turn signal• Works with OEM turn signals• Four wire installation• Use optional plug-n-play wire harnesses in place of stock turn signals• Requires Star Series handguards and mount kit (sold separately);
see the 2019 Parts Europe FatBook
PART # DESCRIPTIONFOR STAR SERIES HANDGUARDS 2020-1701 LED turn signal kit2040-2286 Plug-n-play wire harness for 14-19 FLHX/ FLTRX
2040-2287 Plug-n-play wire harness for 04-13 FLTR, 07-17 FXD (except FXDL/S)
Shown installed on handguard
2001-1821
2001-1820
2020-1701
2050-0304
10 +49 (0) 6501 96 95 -2000 • partseurope.eu
Product NewsTHE DRAG SPECIALTIES
FEBRUARY 2019
PROFILE 21” FRONT FENDER • Medium-length curvaceous design wraps tire perfectly• Stamped from one-piece 14-gauge steel• Direct bolt-on black anodized spacers included
LOW PROFILE REAR AXLE/ ADJUSTER KITS• Kit contains rear axle,
axle adjusters and safety E-clip
• Constructed of 304 stainless steel with machine finish
• 25 mm axle diameter• Easy to adjust with
laser-etched settings
39/49 PRO SHORT STEEL FRONT FENDERS• Unique design allows a 3,50” x 21” wheel with a 120/70-21” tire in a 39 mm
narrow glide fork or a 49 mm mid glide fork for an amazing look• Direct bolt-on black anodized billet bracket makes installation a snap• Stamped from 14-gauge steel
PART # DESCRIPTION1401-0689 For 18-19 FXBB/ FXLR, 06-17 FXDB/ FXDL/ FXDLS
PART # DESCRIPTIONFOR 09-19 FLHT/ FLHR/ FLTR/ FLHX MODELS0214-1761 Black anodized 0214-1763 Gold anodized0214-1762 Red anodized
PART # DESCRIPTION
1401-0688For 18-19 FXBB/ FXLR, 06-17 FXDB/ FXDL/ FXDLS w/ Mid Glide 49 mm forks
1401-0690 For 99-05 Dyna, 88-19 XL w/ Narrow Glide 39 mm forks
0214-1762
0214-17610214-1763
1401-0690
11 +49 (0) 6501 96 95 -2000 • partseurope.eu
Product NewsTHE DRAG SPECIALTIES
FEBRUARY 2019
TWIN RAIL MINI FLOORBOARDS• The perfect blend of
versatility, stylishness and comfort
• Multiple mounting points and splined peg adapters allow for maximum adjustability
• Can be used as passenger floorboards, highway pegs, or driver floorboards
• Seamlessly complements OEM styling
• Male mounts included• Sold in pairs
TWIN RAIL FOOTRESTS• Larger than footpegs but smaller than
floorboards, these footrests are perfectly sized
• Adjustable positioning for maximum comfort and clean style
• No modification required• Easy bolt-on installation• Sold in pairsNOTE: See the 2019 Parts Europe
FatBook for an explanation of footpeg mount styles.
PART # DESCRIPTION1621-0893 Chrome
PART # DESCRIPTION1621-0894 Black
PART # DESCRIPTIONCHROME1620-1861 W/o mounts1620-1862 W/ male mounts1620-1863 W/ M-Eight Softail driver mounts
PART # DESCRIPTIONBLACK1620-1864 W/o mounts1620-1865 W/ male mounts1620-1866 W/ M-Eight Softail driver mounts
1621-0894
1620-18611620-1863
1620-1865
1621-0893