2013
Eurotechnology International Co. Ltd.
June 2013
The Eurotechnology Group’s One Stop Shop Solution to Field Tubular Inspection, Machining
and Accompanying Services
Page 1 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Table of Contents
Overview .............................................................................................................................. 3
Total Tubular & Drilling Equipment Management Services: ................................................. 5
Business Line Descriptions.................................................................................................... 6
Inspection Services ............................................................................................................... 6 QA/QC & 3rd Party Surveillance Services ................................................................................... 6 Rig Inspection Services ............................................................................................................... 6 Miscellaneous Inspection Services ............................................................................................. 7
Machine Shop & Welding Services ....................................................................................... 7 Threading .................................................................................................................................. 7 Tungsten Redress ...................................................................................................................... 7 General Machining & Repairs ..................................................................................................... 7 Hardbanding Services ................................................................................................................ 7
Rental Tools and Equipment ................................................................................................ 8
NDT Training ......................................................................................................................... 8
NDT Level III Service ............................................................................................................. 9
Engineering& Technical Support ........................................................................................ 10
Inspection Services ............................................................................................................. 11 Portable Drill Pipe Inspection Systems ........................................................................................ 14 Inspection of BHA's, Fishing Equipment and other Rotary Equipment ........................................ 15 Rig Inspection ............................................................................................................................. 16
Machine Shop & Related Services ...................................................................................... 17 Repair of Tubulars ....................................................................................................................... 17 Refurbishment of Rotary Tools ................................................................................................... 17 Local Manufacturing: .................................................................................................................. 17 Tubular Repair: ........................................................................................................................... 18 Thread repairs or new cuts ......................................................................................................... 19
Breakout, Refurbish and Makeup Services ......................................................................... 21
Refurbishment and Repair of Pressure Control and related Equipment: ........................... 22 Sub Arc Welding .......................................................................................................................... 23 Vertical and Horizontal Turning .................................................................................................. 23
Page 2 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Welding Services ................................................................................................................ 24 Tungsten Redressing/Hard facing ............................................................................................... 24 Stabilizers redressing .................................................................................................................. 24 Grinding Services ........................................................................................................................ 25 General Welding ......................................................................................................................... 25 Stress Relieving / Post weld Heat Treatment: ............................................................................. 26
Hardbanding Services ......................................................................................................... 27
Refurbishment of Handling Equipment and Manual Rig Tongs .......................................... 28
Shot/GRIT Blast Bay: .......................................................................................................... 29
Spray Painting Area: ........................................................................................................... 29
Pressure Testing ................................................................................................................. 30
Wire Rope Sling Testing ...................................................................................................... 31
In Conclusion ...................................................................................................................... 32
Page 3 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Overview
The Eurotechnology Group is the oil and gas industry’s leading independent
provider of inspection technologies, innovated threading systems and related equipment required to establish a one stop solution to the inspection, repair and
refurbishment of tubulars, drilling, completion and related equipment and
accessories.
The one stop solution is targeted generally at the drilling contractor, smaller
operating companies and service companies trying to reduce overhead and focus on their core competencies, rather than expending energies on support services
to their operations.
The one stop shop solution offers the customers the following advantages from just one source:
1. One service entity to interface with assigned focal point 2. Logistical support from the dock to the yard, to the rig and back to base.
3. Tubular Management system, Storage and material tracking systems
4. Servicing, repair and refurbishment of drill strings and BHA tools
5. Oilfield Machine Shop Services 6. Refurbishment, assembly and testing of completion assemblies
7. Tungsten redress welding services
8. General welding and fabrication services 9. Procurement and Supply of tubulars, drilling and completion equipment
10.Rental of drill strings, BHA and related equipment.
The customer by taking the one stop shop approach is able to leave a good part
of its operational support to one qualified service company which is in turn
allows the client to focus on what it does best.
To facilitate a fast set up of a field support services operation, Eurotechnology
has developed a containerised approach to the various inspection, threading and
drilling tool refurbishment requirement. This enables the equipment to be assembled and tested at the plant before being shipped. This also allows for the
training of personnel on the actual equipment that they will help set up and then
operate in a field environment.
While the service equipment is being manufactured and assembled ready for
shipment, the local service company would prepare the infrastructure as defined
by Eurotechnology so when the shipment(s) arrive on location the installation and commissioning times are very time efficient and the operation is made ready
to service its customers in as short a time as possible.
Page 4 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
As the machine shop operation develops and moves to offering the customer a
more specialised service offering such as the local manufacture of products as
indicated later in this overview and the operation undertakes more specialized services such as refurbishment of pressure control and related equipment a
more permanent facility will be required to better control the environment and
protect the assets that are not designed to cope with field type operations.
For the end user that prefers a
more permanent approach to
the facility, Eurotechnology would undertake to work with
the customer on the design of
the different structures requirement and assist
technically as the construction
takes place.
The Eurotechnology Group is
flexible in how it works with the
different service providers that wish to leverage of the
considerable experience
Eurotechnology has in its group and to this end we are very
willing to work with the end
user on a solution that suits the
business model they envision.
Page 5 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
The Eurotechnology Group “One Stop Shop Service”
Concept
Total Tubular & Drilling Equipment Management Services:
Supply Chain;
o Procurement of tubulars, tools, equipment and products to the oil
and gas industry
Rental:
o Short to long term rental of Tubulars, BHA, Tools and Equipment
Advanced Inspection Services:
o Drill Strings & BHA
o Casing and Tubing
o QA/QC & 3rd Party Inspection Services
o Rig Based Inspections
Refurbishment & Repairs:
o Machine shop services
o Hardbanding services
o Tungsten Redress
o Welding Services
Logistic Control / Material Management:
o State of the art tracking systems, Material Reporting & Web based
proprietary Material Tracking system
Storage (when available):
o Facilities for clients including 24/7 recordable video surveillance
o Short and long term storage for the end users
o Specially designed storage racking systems
o Load in / load out and transportation organised for the end user
Page 6 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Business Line Descriptions
Inspection Services
State of the art electromagnetic and propriety technology full
length ultrasonic inspection services:
Drill Stem and its BHA Rotary Tool Components
Oil Country Tubular Goods (Casing & Tubing) Tubing Work Strings
Line Pipe
Drilling Tool and Equipment Inspection
Completion Assemblies & associated components
Rotary Drill Stem Products and Specialty Tools Non-magnetic BHA equipment
Directional, Electric Wire Line & Slick line packages
QA/QC & 3rd Party Surveillance Services
Vendor Inspection Services
Quality Assurance & Quality Control
3rd Party Surveillance Mill Surveillance Inspection
Rig Inspection Services
API 14 Derrick surveys utilising Rope Access
LOLER Lifting surveys controlled and monitored via Data Base
Extensive Hull, Tank & Deck Gauging Surveys
Top Drive, Travel Block & Crown Block Inspections Dolly track alignment
Rig Wide Surveys
Pad eye Recertification Crane Pedestal/Boom Inspections
Various NDT Techniques utilising Rope Access
Chain Inspections Spud Can Inspections
Leg & Chord Inspections via Rope Access
Page 7 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Miscellaneous Inspection Services
Material Analysis
Video Boroscope Inspection Field Gradient Inspections (Hot Spot Testing)
Hardness Testing
Photographic Logging
Machine Shop & Welding Services
Threading
Threading of Casing, Tubing and Rotary connections
Re-cutting / repair of API Casing, Tubing and Rotary connections
Repair and refurbishment of Premium threaded tubulars under licence
from the OEM provider once the shop is operational and accredited to ISO
Tungsten Redress
Tungsten Redress of drilling and fishing tools such as stabilizers, mills
and tungsten dresses equipment.
General Machining & Repairs
Machining and Welding Services including refurbishment of well heads,
pressure control equipment, valves and manifolds
Hardbanding Services
Licensed Applicators of most Proprietary Wires including Arnco 100;
300 & 350XT Duraband® NC Certified Applicator
ULTRABAND™ NM
Specialized in In-Field Repair of the 18˚ Box Taper
Page 8 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Rental Tools and Equipment
Rentals to the operating companies, drilling contractor and service companies of
drill strings and BHA components, work strings, specialised drilling tools and equipment including drilling jars, shock tools, stabilizers and pressure control
equipment etc. either through a direct investment or via an association with
third parties when deemed appropriate.
NDT Training
Eurotechnology is a leading provider of applied inspection technologies training programmes and certification for both internal operations as well as third party
client’s personnel for the following disciplines.
From its roots in the North Sea, Eurotechnology & NDT Eagle has been supplying NDT training to the different industries which use NDT Inspection processes.
Approved Inspection / NDT Training & Personnel Certification (Note1)
Advanced NDT Techniques (EMI; UT; ET ; F.L.U.T.) NDT Methods (MT ; PT ; UT ; VT; RI ; RT)
Weld Inspection Processes (3.0; 3.1; 3.2)
ASNT / PCN Level III Consultant
In addition to training Eurotechnology’s personnel it is anticipated that the NDT
inspection training business will be expanded into the various customers that
carry out in-house inspection processes in both the oil and gas operating sectors including the industrial plants and refineries that should have a large
requirement for various NDT disciplines.
Note 1 Inspection Terminology
EMI: Electromagnetic Inspection technologies F.L.U.T: Full Length Ultrasonic Testing
ET: Eddy Current Testing UT: Ultrasonic Testing
MT: Magnetic Particle Testing PT: Liquid Penetrant Testing
VT: Visual Thread Inspection RT: Radiographic Testing RI: Radiographic Interpretation
Page 9 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
NDT Level III Service
The Level III inspector qualification for the NDT industry is best in class and
when combined with experience gained from various projects and disciplines the Level III inspector becomes indispensable to establishing and supporting a
successful inspection, machining and related operation.
In addition to providing the technical support based on qualification and
experience, the Level III inspector in a field operation will arrange the different
NDT training, examination and certification of the NDT related inspectors.
EUROTECHNOLOGY GROUP offers NDT Level III services that include:
Personnel qualification services, procedure development and review, third party overview, witness and problem resolution.
Personnel qualification services include documentation review, training
and qualification examinations. Documentation review and examinations are performed to assure
education, training, experience and qualification examinations meet
the appropriate code, specification and client requirements.
Eurotechnology’s Level III engineer is certified to:
TÜV Nord CERT Germany Magnetic Particle Testing (MT) Level III
Liquid Penetrant testing (PT) Level III
Visual Testing (VT) Level III Ultrasonic Testing (UT) Level III
Electro Magnetic Testing (ET) Level III
Radiographic Testing (RT) Level III
CSWIP
Rotary Tool Supervisor Level III
Drillstem Senior Inspector Level III DGZfP: NDT Master
Page 10 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Engineering& Technical Support
While the NDT Level III inspector is the technical resource for the inspection and
related services it takes a totally different discipline to support the machine shop and related services as indicated below.
To ensure adherence to the clients requirements, the different specifications and OEM certification criteria, it is very important that the machine shop and other
services are technically lead through an experience engineering function that has
external support to ensure that operation stays abreast with the latest in technology and accreditation and the customer has someone to technically
interface with.
The Engineering department would offer a full design service in-house from “concept to completion” backed up with a fully documented design package to
meet API or relevant customer standards.
The local engineering group would offer 2-D design solutions in the form of
AutoCAD from conceptual layouts to detailed machining drawings, giving the
customer the opportunity to visualize the solution to their problem prior to
manufacture.
Services offered by the Engineering GROUP Engineering Department would in
order to support the machine shop and related operations include:
Operations Engineering Support
Machine Shop Engineering Support Field Support & Design
Engineering Project Coordination
Material Selection
Equipment Modifications & Repair Special Orders/One-offs
Design Drafting
Conceptual Layouts Detailed Manufacturing Drawings
Design Testing & Verification
Research & Analysis (performance & failure) Cost Implication Assessment
Technical Support (API, DS1 & ISO) as well as the OEM’s for
accreditation
Page 11 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Inspection Services
The Eurotechnology Group is the Oil and Gas Industry’s leading independent
supplier of advanced inspection technologies
The fixed head units supplied by the Eurotechnology Group are a combination of
EMI, full length ultrasonic inspection and end area ultrasonic inspection which can be supplied as a EMI unit, EMI with an ultrasonic end area inspection unit,
Ultrasonic System or a combination of all
The fixed head unit can be configured to include:
External Cleaning of the pipe body
Transverse and Three-dimensional Defect Detection Longitudinal / oblique
Average wall loss via EMI
Full length Wall thickness measurement via the Ultrasonic inspection process Grade comparison
Ultrasonic End Area Inspection
Typical Size Range: 2 3/8” to 13 3/8” OD
If the EMI unit does not include ultrasonic inspection and wall thickness in the
original build, the unit can be built with a provision to retrofit this at a later date.
Whatever configuration is provided it would be beneficial to include an allowance
to incorporate the end area ultrasonic inspection for DS1 category 5.
The fixed head unit’s strength is the high rate of through put and additional
inspection capabilities it offers vs. portable type equipment current being offered
for the most part.
Most inspection is charged to the client on a per joint basis and when set up
correctly with the personnel to finish the tools joint and connections, the fixed
head unit will be able to complete on average up to four times the inspection verses using the buggy type system which is very much more manual and less
effective process limited to only transverse and wall loss inspection.
The fixed head unit with a combination of EMI and Ultrasonic inspections that
offers something that differentiates the inspection service offering well in
advance of what is currently offered via local inspection companies.
Page 12 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
End area finishing, note enclosed inspection cabins
Load on Rack
Full Length EMI inspection Unit with Ultrasonic end area and external cleaning
Page 13 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Ex
Examples of the interior of the Inspectors Control Cabin. The control Cabin
configuration is dependent on Model and Inspection capabilities selected
Page 14 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Portable Drill Pipe Inspection Systems
EUROTECHNOLOGY GROUP employs the latest state of the art real time
computerised inspection system to inspect the tube of used drill pipe and tubing at field locations.
The Dual Function unit is Advanced Real Time Inspection System based around a
portable buggy type system that includes not only transverse and three dimensional inspections but full length average wall loss.
Supporting the inspection of the drill pipe are inspection equipment for the bottom hole assembly (BHA) as well as Refacing equipment (sandpaper type) to
polish the rotary connection face should minor imperfections be present.
Page 15 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Inspection of BHA's, Fishing Equipment and other Rotary
Equipment
In additional to the various tubular
types, the client will require a full range of inspection services for their
Bottom Hole Assemblies (BHA) and
other tools and equipment
The Eurotechnology BHA inspection kit
is designed accompany the fixed head units, the field type drill pipe unit as
well being used for the various
miscellanies inspection requirement.
The BHA inspection kit has the
capability to inspect all the different
types of rotary and handling equipment including non-magnetic tools and
equipment:
MPI inspection of threads, end areas and bodies. Visual and Full dimensional checks
Dye Penetrant Testing
Accompanying Services also include
Ultrasonic Testing
Hardness Testing Pipe straightening
Page 16 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Rig Inspection
The Eurotechnology Group offers a full rig site inspection service including the
following items:
Drilling/Work-over rig mast’s, crown block and substructure
Lifting equipment i.e. slings, wire ropes, cranes, forklifts, hooks, baskets,
containers, shackles, pad-eyes handling equipment Elevators, Rig tongs
Wellhead running tools
Hooks, travelling blocks etc. Dead line tie downs, raising line – pad-eyes, sockets, rings
Mud pumps – pistons, modules, valve cups, manifolds
All lines carrying pressure
Rig site inspection services include magnetic particle, liquid penetrant, visual,
mechanical measurements, ultrasonic inspection methods and hydrostatic
testing.
Page 17 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Machine Shop & Related Services
When establishing a oilfield machine shop it has to be considered as to what services the machine shop will provide to the end user as each facet of the
service will require specialist personnel and equipment
Repair of Tubulars
The EUROTECHNOLOGY GROUP machine shop management system is designed to operate in accordance to ISO 9001-2008, ISO 1400: 2004 and BS OHSAS
18001: 2007 along with the appropriate API standards 5CT, 6A, 7 and 16A for
example for the machining and re-cutting API rotary, casing and tubing connections and the various drilling equipment.
In addition to the API rotary connections, the machine shop will be designed
with accreditation to the tubular manufacturer’s propriety connections in mind.
Refurbishment of Rotary Tools
The machine shop would have the capability to strip down rotary equipment
such as drilling jars, shock tools and downhole motors, inspect and reassemble
the equipment
Local Manufacturing:
The move from providing machine shop services to establishing a selective local
manufacturing unit is a natural progression especially having the engineering
group already established
While additional machine tools will be required a start-up operation this would
most likely initially cover items such as those indicated below:
General and Precision Machining Works
Coupling and Flow Coupling, per API Spec. 5CT
Crossover Subs & Pup Joints, Lift Subs and Lift Plugs, Mills, Wash pipe extensions, Overshot’s etc.
Certified welding to API, DNV 2.7.1 and ANSI
Page 18 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Downhole Tools
Pressure Control Equipment (DSA's etc.)
Assorted Fishing Tools, Mills, Shoes etc. Gaskets, nuts and studs
Tubular Repair: The innovated CNC In-situ Threading Lathes are recognised by the OCTG industry as being the leading unit and while there are several size combinations a typical unit would cover a size range from 2 3/8” to 20” OD tubulars. The In-Situ Threading unit is designed for an operation that has a high through put with typical cycle times indicated below
CONNECTION
TYPE
OUTSIDE
DIAMETER
CONNECTION
CUTTING
CYCLE TIME
MACHINE
RPM
LOAD
LAZER TRU-
UP/OFFLOAD TIME (est)
API BUTTRESS
5-1/2”
(140mm)
60secs 500 rpm 45 secs.
API BUTTRESS
7”
(177.80mm)
90secs 390rpm 45 secs.
API BUTTRESS
9-5/8”
(244.50mm)
125secs 280rpm 60 secs.
API BUTTRESS
13-3/8”
(339.70mm)
170secs 210rpm 60 secs.
API BUTTRESS
18-5/8”
(473mm)
350secs 150rpm 90 secs.
API BUTTRESS
20” (508mm) 400secs 130rpm 90 secs.
PREMIUM (typical)
5-1/2”
(140mm)
120secs 500rpm 45 secs.
PREMIUM (typical)
7”
(177.80mm)
180secs 390rpm 45 secs.
PREMIUM (typical)
9-5/8”
(244.50mm)
250secs 280rpm 60 secs.
PREMIUM (typical)
13-3/8”
(339.70mm)
340secs 210rpm 60 secs.
Page 19 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Thread repairs or new cuts
Rotary & other API Connections:
Lifting subs
Crossover Subs Line Pipe
Drill Pipes
Drill Collars
Tubing Casing
Stabilizers
Mills and Other Drilling Tools and Equipment
Propriety Connections
The In-situ range of CNC threading equipment is approved by the major OEM tubular manufacturing for field applications
Typical Specification for a 20” Series 2000 Machine System.
Fanuc 32i-TB Series control mounted in a custom pendant.
Fanuc Screen display function with remote access for on-line diagnostic and operational support from In-Situ(if required).
1 off HMOP Fanuc handy panel.
Custom designed Fanuc Picture screen for Operator assistance and
Diagnostic CE marked Rittal enclosure housing all control gear and associated
equipment.
In-Situ Rotating head with CNC controlled X Axis movement to allow turning operations on stationary pipe.
Fanuc Alpha iI40/6000HV AC Spindle motor.
Z Axis linear movement by four precision preloaded linear bearings. Dual preloaded precision ballscrews on Z Axis.
1 SET Sandvik Capto toolholders .
X axis Direct feedback via Renishaw Resolute® scale (Closed Loop).
Moog® Rotary data communication for X Axis scale. Z axis Direct feedback via Heidenhain scale (Closed Loop).
Programmable In-Situ Servo controlled 4 Jaw Chuck 22” through bore.
Operating range 22"- 2 7/8" without Jaw change. Programmable 4 off High accuracy pipe alignment lasers integrated
with the Pendleslide® pipe alignment system.
Hydraulic power pack to suit.
Page 20 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Fully integrated high pressure (up to 70Bar) coolant system with paper
band filter.
Through spindle coolant. Swarf conveyor.
Completely enclosed machine guarding, operator sliding access door
with safety interlock system. 1 set of Fanuc Manuals, Installation layout, Maintenance, Parts and
operation manuals.
1 Set of Foundation Drawings and elevation details.
Necessary outputs (Machine in cycle, Pipe Clamped/Unclamped, Emergency stop) to interface with handling equipment.
The Eurotechnology advanced In-situ CNC threading lathe, containerised and
ready to operate
Page 21 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Breakout, Refurbish and Makeup Services
This service offers the end user a complete strip down, inspection, reassemble
and test of downhole drilling equipment such as drilling and fishing jars, accelerators and shock tools. It also offers a completion makeup and testing
service to the operating company.
Page 22 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Refurbishment and Repair of Pressure Control and
related Equipment: The company has the capabilities to bore and machine large parts with diameter up to 78’’ and depths up to 67’’ for:
Blow out Preventer (BOP’s) with single ram and double rams.
Rotary hose Body annular single and double.
Bonnet.
Valve.
Mud cross. Fluid ends.
Drilling spool.
Gate valve Manual / Hydraulic and check valve. Flange and adapter.
Kill line and choke manifold.
General and precision Machining Works
Page 23 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Sub Arc Welding
Cladding and rebuild of Pressure Control and related Equipment
Vertical and Horizontal Turning
Horizontal Boring
CNC Vertical Turning Lathe
Page 24 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Welding Services
The typical oilfield machine shop welding operations is designed to cover different tools from the redress of Stabilizers and mills to the fabrication of items
such as baskets
Tungsten Redressing/Hard facing The redressing and hard facing of drilling tools, and fishing tools is carried out using:
Tungsten carbide inserts. Trapezoidal shaped inserts.
Tungsten carbide
Stabilizers redressing
EUROTECHNOLOGY GROUP provides its customer
with the technology advanced welding system for
the tungsten redress of stabilizers.
The tungsten redress process will extend the life of downhole tools, thereby reducing costs and
improving productivity
Page 25 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Grinding Services
After redressing of the various stabilizers and mills, they are then ground to
meet the nominal OD required by the end user
General Welding
The EUROTECHNOLOGY GROUP offers general welding and fabrication services
to its clients such as tanks, transport baskets and other general welding
requirements
Page 26 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Stress Relieving / Post weld Heat Treatment:
To cope with the
different stress relieving
and heat treating operations from
Pressure Control
Equipment to Rotary
Tools, a significant capability is required.
Eurotechnology offers
an electric oven for Heat Treatment with a
volume capacity of 9m3
and a heating capacity
of 1200o C maximum temperature. Lower
capacity ovens are also
available.
Page 27 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Hardbanding Services
Eurotechnology offers the latest in Hardbanding technologies utilizing the
propriety Eurotechnology Hardbanding
systems
EUROTECHNOLOGY GROUP is certified
by the OEM to apply Arnco, Duraband & ULTRABAND™ NM Hardbanding
products.
Page 28 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Refurbishment of Handling Equipment and Manual Rig
Tongs
Load test for rig handling equipment can be performed to pressures from 1.3 bar (2,5 Ton/in2) -
276 bars (500 Ton/in2), SWL such tests are
carried out on:
Tongs (Hydraulic, Pneumatic or Manual)
Elevator (Single joint, Slip, Collar or
Spider)
The testing operation is monitored through a CCTV and recorded digitally as well
as on a chart and provided to the end user along with a report on the work carried out.
Page 29 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Shot/GRIT Blast Bay:
The Shot / GRIT Blast Unit comes with a complete re-cycling and filtration
system and is used to strip clean the drilling tools and handling equipment so they can be reassembled and re-painted them as part of the overall check and
test operation.
The Blasting systems come in a pre-containerised version or with the equipment
ready to install in a fixed structure
Spray Painting Area:
The spray paint area can either be a permanent installation or a containerised version equipped with an environmentally friendly paint booth to ensure that the
tested, repaired and manufactured equipment is sent out in an “as new”
condition
Page 30 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Pressure Testing
EUROTECHNOLOGY GROUP provides a wide range of pressure testing equipment for both a permanent or
containerised installation.
The equipment is designed to perform high pressure
testing Hydraulic and Hydrostatic with pressures from
2,000 Psi up to 20, 000 Psi.
Blow out Preventer (BOP) with single & double rams;
Annular (BOP). Choke Manifold.
Gate Valve, Check Valve, Valve inside BOP & Mud Cross.
Kill Line, Choke Line, Lower Kelly and Upper Kelly; Completion assemblies
Typical Containerised System can be based on either an 20 or 40 foot container plus a smaller container for test panel and recording systems
Page 31 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
Wire Rope Sling Testing
Several types of wire rope sling testers are available to meet the requirement of
the local operating company and drilling contractor, examples are indicated below:
100Tons, 10m
Bed
Digital monitor LED
readout
113Tons, 9.14m
Bed
Desktop + Software
100Tons, 10m
Bed
Desktop + Software
100Tons, 10m
Bed
Desktop + Software
Page 32 of 32
P.O Box: 4275 Al Khobar 31952 Kingdom of Saudi Arabia. Tel No. +9 66 3 5107172 Fax No. + 966 3 8938496 Email: [email protected] Web: www.eurotechhnologygroup.com
Eurotechnology International Co. Ltd is Registered in the Kingdom of Saudi Arabia;
Capital SAR 8,000,000: CR No. 2051049665 & Branch CR No 2052002032
Office: 6C, Floor: 6, Al Meflah Building, Prince Abdul Mohsin St. Al Khobar, Kingdom of Saudi Arabia
In Conclusion
• The Eurotechnology Group is the forerunner in field
technologies for inspection, machining and related
operations providing a one stop shop approach to the end-
users.
– One Company,
– One Interface,
– Focused Service Delivery using latest technologies
– Consolidated Oilfield inspection and machine shop
capability in a managed approach.