+ All Categories
Home > Documents > The explosion protection recom- Explosion proof type … proof type Lighting Fittings Explosion...

The explosion protection recom- Explosion proof type … proof type Lighting Fittings Explosion...

Date post: 30-Apr-2018
Category:
Upload: hoangkhanh
View: 224 times
Download: 2 times
Share this document with a friend
4
Explosion proof type Lighting Fittings Explosion proof type Control Boxes SEIWA offers industrial lighting products with high Japanese quality SEIWA’s LED lighting fitting series PERLE PUR contributes to eco-friendly society through environmental load reduction in four factors: Co2 emissions, power consumption, maintenance cost, and waste. ECOLOGY for the Earth Environment ECOLOGY for the Earth Environment 2013.5 (2)SO The information in this brochure is as of May 2013. It is subject to change without notice. This brochure is printed in eco-friendly vegetable-oil based ink. For ordering or further information, contact us. Lamp fitting Installation of new fitting Installation completed Removal Removal Removal of old fitting Approved items Approved items Terminal box Suspension pipe Lamp fitting Terminal box The lamp fitting, suspension pipe, and terminal box are approved as a package. Since the lamp fitting, suspension pipe, and terminal box are approved, the terminal box connected to the mains must also be replaced. Since the lamp fitting with a built-in terminal box is approved, the existing terminal box on the conduit need not be removed. Lamp fitting with a built-in terminal box is approved. Installation of new fitting Installation completed Removal of old fitting Left intact Left intact Left intact Replacement Removal Replacement Note: For use of the existing conduit, the mounting pipe of the old fitting must fit the new fitting. If the pipe size is not suitable, consult us. The mains conduit must be removed. Increase in replacement work cost and man-hours Point to notice Point to notice Point to notice Updated fitting Approved items of flameproof lighting fitting Replacement of existing lighting fitting as per explosion protection recommended practices A broad lineup of terminal box built-in products for retrofitting! A broad lineup of terminal box built-in products for retrofitting! ←See this mark on the inside pages of this brochure. series Explosion proof type LED lighting fittings Explosion proof type fluorescent lighting fittings series LGAA /LGLA AGAC /TGAC Updated fitting with a built-in terminal box that permits the use of the existing conduit Existing fitting http://www.seiwa.co.jp Head Office: 36, Shin-ike, Terada, Joyo, Kyoto Prefecture, 610-0192 Japan Tel.81-774-55-8181 Fax.81-774-58-2034 Tokyo Branch: Izumikokusaisangyo Bldg, 3-3 Kanda-Mitoshirocho, Chiyoda-ku, Tokyo, 101-0053 Japan Tel.81-3-5217-2111 Fax.81-3-5217-2112 SEIWA ELECTRIC MFG. CO., LTD. The explosion protection recom- mended practices state that con- nection of an electrical apparatus with an external conductor should be made inside a terminal box. →Recommended practices for explosion- protected electrical installations in general industries (gases and steam explosion pro- tection 2006) "2141 Method of connecting an electrical apparatus with an external conductor" The mains conduit need not be removed. Terminal box built-in type available Substantial reduction in replacement work cost and man-hours
Transcript
Page 1: The explosion protection recom- Explosion proof type … proof type Lighting Fittings Explosion proof type Control Boxes SEIWA offers industrial lighting products with high Japanese

Explosion proof type Lighting FittingsExplosion proof type Control Boxes

SEIWA offers industrial lighting products with high Japanese quality

SEIWA’s LED lighting fitting series PERLE PUR contributes to eco-friendlysociety through environmental load reduction in four factors:Co2 emissions, power consumption, maintenance cost, and waste.

ECOLOGYfor the EarthEnvironment

ECOLOGYfor the EarthEnvironment

2013.5 (2)SO

The information in this brochure is as of May 2013. It is subject to change without notice.

This brochure is printed in eco-friendlyvegetable-oil based ink.

For ordering or further information, contact us.

Lamp fitting

Installation of new fitting

Installation completed

RemovalRemoval

Removal of old fitting

Approved items

Approved items

Terminal box

Suspensionpipe

Lamp fitting

Terminalbox

The lamp fitting, suspension pipe, and terminal box are approvedas a package.

Since the lamp fitting, suspension pipe, and terminal box are approved, the terminal box connected to the mains must also be replaced.

Since the lamp fitting with a built-in terminal box is approved,the existing terminal box on the conduit need not be removed.

Lamp fitting with a built-in terminal box is approved.

Installation of new fitting

Installation completed

Removal of old fitting

Left intact

Left intactLeft intact

ReplacementRemovalReplacement

Note: For use of the existing conduit, the mounting pipe of the old fitting must fit the new fitting. If the pipe size is not suitable, consult us.

The mains conduitmust be removed.

Increase in replacementwork cost and man-hours

Point to notice Point to noticePoint to notice

Updated fitting

Approved items of flam

eproof lighting fittingReplacem

ent of existing lighting fitting as per explosion protection recommended practices

A broad lineup of terminal box built-in products for retrofitting! A broad lineup of terminal box built-in products for retrofitting! ←See this markon the inside pages of this brochure.

seriesExplosion proof type LED lighting fittings Explosion proof type fluorescent lighting fittings

seriesLGAA /LGLA AGAC /TGAC

Updated fitting with a built-in terminal box that permits the use of the existing conduit

Existing fitting

http://www.seiwa.co.jp

Head Office:36, Shin-ike, Terada, Joyo, Kyoto Prefecture, 610-0192 JapanTel.81-774-55-8181 Fax.81-774-58-2034

Tokyo Branch:Izumikokusaisangyo Bldg, 3-3 Kanda-Mitoshirocho, Chiyoda-ku, Tokyo, 101-0053 JapanTel.81-3-5217-2111 Fax.81-3-5217-2112

SEIWA ELECTRIC MFG. CO., LTD.

The explosion protection recom-mended practices state that con-nection of an electrical apparatus with an external conductor should be made inside a terminal box.→Recommended practices for explosion-protected electrical installations in general industries (gases and steam explosion pro-tection 2006) "2141 Method of connecting an electrical apparatus with an external conductor"

The mains conduitneed not be removed.

Terminal boxbuilt-in type

available

Substantial reductionin replacement workcost and man-hours

Page 2: The explosion protection recom- Explosion proof type … proof type Lighting Fittings Explosion proof type Control Boxes SEIWA offers industrial lighting products with high Japanese

SEIWA occupies a leading positionin the flameproof lighting fitting industrythrough many achievements in Japan and abroad.Since its foundation in 1945, SEIWA ELECTRIC MANUFACTURING Co., Ltd. has delivered industrial lighting fittings, road and tunnel lighting fittings, and street and landscape lighting fittings to many customers. Particularly in the factory/plant industrial lighting field, we have supplied flameproof lighting fittings suitable for any environment and conditions, enjoying a high reputation for the safety and reliability of our products in Japan and foreign countries. Also we were quick to enter into the optoelectronics field. We have succeeded in uniquely developing blue light emitting diodes. Today we have a mass production system for various LED devices and continue to expand the lineup of LED lighting fittings. SEIWA's industrial lighting fittings, which are based on self-developed LED devices and manufactured by our integrated production system, are offering security and safety to enrich your daily lives.

Developed GM type sockets (waterproof type sockets).SEIWA ELECTRIC MANUFACTURING Co., Ltd. was established.

Delivered waterproof fluorescent lighting fittings first in Japan and introducedthe brand

Developed flameproof fluorescent lighting fittings first in Japan.

Introduced a lineup of flameproof high-frequency lighting fittings series.

Acquired ISO9001 certification.

Introduced a lineup of IEC-compliant flameproof lighting products.

The waterproof fluorescent lighting fittings factory was approved as a JIS factory.

Started the sale of blue LEDs. Launched the world's thinnest blue chip LEDs (surface-mount type).

Delivered lighting fittings for the Kanmon Tunnel (Japan's first undersea tunnel).

Developed increased-safety fluorescent lighting fittings first in Japan.

Acquired ISO14001 certification.

1949

1950

1958

1957

1955

1973

1989

1999

2003

2004

2006

2007

2008

2010

2011

2002

2000

Flameproof fluorescent lighting fittings and high-intensity discharge lightingfittings received Chinese certification (NEPSI).

CHANGSHU SEIWA ELECTRIC Co., Ltd. started the production and sale offlameproof lighting products. Flameproof high-frequency fluorescent lightingfittings (AZAC) received Chinese certification (NEPSI).

Developed three-band white LEDs.

Developed barrier-free LED's.

The new LED factory building with LED facilities went into full-scale operationin April 2011.

Introduced a lineup of LED lighting fittings series. Flameproof high-frequencyfluorescent lighting fittings (ANPA) received Chinese certification (CQST).

In the industrial lighting field, we have long supplied lighting fittings for use in harsh environments such as explosive atmospheres of plants and oil refineries.Based on high technical expertise, we continue to expand the lineup of LED lighting products including flameproof products to suit any production site condition.

In the information display system field, we supply a wide range of products as communication tools in the advanced informa-tion society including information display systems for roads and rivers, tunnel disaster prevention systems, LED information displays, and LED traffic lights. In the lighting field, we have plenty of experience in lighting for ordinary roads, expressways, tunnels, and landscapes.

In the noise suppression field, we develop and manufacture products for shielding or preventing electromagnetic noise which is increasing with the spread of digital devices. As for cable protection products, since the introduction of the “Cutting Duct” series in 1963, we have maintained our position as a pioneer in the field, offering various eco-friendly and user-friendly cable accessories. In addition, we utilize our LED development technology to supply LED modules which meet any customer needs.

Head Office of SEIWA Electric Mfg. Co., Ltd.

LED & LightingLED & Lighting

Social SystmsSocial Systms

ComponentComponent

●Industrial lighting fittings●LED products for lighting

●Information display systems●Road/tunnel lighting fittings

History of SEIWA's industrial lighting business

●Noise suppression products●Cable protection products●LED module products

ISO9001 certificate

ISO14001 certificate

Japan's first waterproof fluorescent lighting fitting

GM type socket

Flameproof Hf fluorescentlighting fitting

Kanmon Undersea Tunnel

Tunnel lamp

Increased safety LED lighting fittings

New LED building

Blue LED

Three-band white LED

Changshu Seiwa Electric Co., Ltd.

Page 3: The explosion protection recom- Explosion proof type … proof type Lighting Fittings Explosion proof type Control Boxes SEIWA offers industrial lighting products with high Japanese

LEDLighting Fittings

LGBAseries

Higher brightness than fluorescent lamps and compact aluminum die casting.

Full Lineup of Flameproof LED Lighting Products

AC100~240V50/60Hz66.5W(66W type)/45W(44W type)6,650 lm(66W type)/4,550 lm(44W type)100 lm/W(66W type)/101 lm/W(44W type)White LED5,000 K

Ra 65IP 65Exed B+H2T4Aluminum die castingMelamine resin baking finish Approximate Munsell color 10YR7/1 Entries: 4 ways with 3 plugsApprox.11.5kg(LGBA061241V2)

LGBA0612(66W type)LGBA0608(44W type)

Zone1/2Hazardous Area

IP 65Degree of protection

Type of protection60,000 hLamp Life

Explosion proof type LED Lighting Fittings■Equivalent to two FHF32W (high power) lamps

Japan's first product operable on both AC and DC power.

LGLA1501

AC100~220V DC100~110V50/60Hz17W(AC power)/15W(DC power)1,050 lm60 lm/W(AC power)/ 70 lm/W(DC power)White LED5,000 K

Ra 65IP 65Exed B+H2T4Stainless steelMelamine resin baking finish Approximate Munsell color 10YR7/1 Entries: 4 ways with 3 plugsApprox. 5kg(LGLA150142)

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°500

100200

300400500

100200

300400

●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

*Pipe Pendant (short) ●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

*Pipe Pendant (short)

●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

*Pipe Pendant (short)

●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

*Pipe Pendant (short)

●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

*Pipe Pendant (short)

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

Note: The recommended replacement frequency of flameproof lamps is every 15 years and their useful life is 20 years (ambient temperature 30℃, 10 hrs of lighting per day, 3000 hrs of lighting per year)

A solution to all problems inherent in existing products with incandescent lamps. Vaper Tight Type LED Lighting Fittingsfor Inside Inspection■Equivalent to an incandescent 100 W lamp for inside inspection

AC100~200V,200~240V50/60Hz22W900 lm41 lm/WWhite LED5,000 K

Ra 65IP 65Exde CT5Aluminum alloyMelamine resin baking finish Approximate Munsell color 10YR7/1 Entry: one wayApprox.4.0kg

●Mounting bracket (option) ●Mounting bracket (option)

●Protection Guard(option)

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°2500

5001000

150020002500

5001000

15002000

LCTC 19181

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°2500

5001000

150020002500

5001000

15002000

Easy to replace an existing incandescent lighting fitting with this product.

Explosion proof type Fluorescent Lighting Fiitings

Certified by the National Supervision and Inspection Centre for ExplosionProtection and Safety of Instrumentation (NEPSI).

Certified by the China National Quality Supervision and Test Centre forExplosion Protected Electrical Products (CQST).

1234567

891011121314

1234567

891011121314

1234567

891011121314

1234567

891011121314

1234567

891011121314

1234567

891011121314

1234567

891011121314

1234567

891011121314

FML36EX

IP 65Degree of protection

LGAAseries

TGACseries

Compact, highly robust and durable and easy to install.

IP 65Degree of protection

40,000 hLamp Life

AC100~200V,200~240V50/60Hz36.5W(33W type)/25.5W(22W type)3,100 lm(33W type)/2,100 lm(22W type)85 lm/W(33W type)/82 lm/W(22W type)White LED5,000 K

Ra 65IP 65Exed B+H2T4Aluminum die castingMelamine resin baking finish Approximate Munsell color 10YR7/1Entries: 4 ways with 3 plugsApprox. 9kg(LGAA06641V2)

Explosion proof type FluorescentLighting Fiitings

Explosion proof type FluorescentLighting Fiitings

Explosion proof type FluorescentLighting Fiitings

AGACseries

Explosion proof type FluorescentLighting Fiitings

AC100~242V50/60Hz35W2,900 lm83 lm/WFluorescent Lamp5,000 K

Ra 84IP 65ExnAd B+H2T4Aluminum die castingMelamine resin baking finish Approximate Munsell color 10YR7/1Entries: 4 ways with 3 plugsApprox. 8.5kg(TGAC36141/TGAC36146)

Brightness equivalent to a 400 W mercury vapor lamp.

AC100~240V50/60Hz144W12,050 lm83 lm/WWhite LED5,000 K

Ra 70IP 65Exde B+H2T6XAluminum alloy castingMelamine resin baking finish Approximate Munsell color 10YR7/1Entries: 4 ways with 3 plugsApprox. 22kg(LZIA3304941)

Zone1/2Hazardous Area

IP 65Degree of protection

Type of protection60,000 hLamp Life

Exde B +H2T6X

Zone1/2Hazardous Area

IP 65Degree of protection

Type of protection40,000 hLamp Life

IP 65Degree of protection

40,000 hLamp Life

Exde CT5

Zone 2Hazardous Area Type of protection

ExnAd B +H2T4Type of protectionExdnA B +H2T3XIP 65

Degree of protectionZone 2

Hazardous Area

AC100~200V,200~240V50/60Hz22W900 lm41 lm/WWhite LED5,000 K

Ra 65IP 65

Aluminum alloyMelamine resin baking finish Approximate Munsell color 10YR7/1

Approx. 2.5kg

Lamp FHF32EX AC100~242V50/60Hz91W(two 45W Lamps) 69W(two 32W Lamps)4,950 lm×2(two 45W Lamps) 3,520 lm×2(two 32W Lamps)109 lm/W(two 45W Lamps) 102 lm/W(two 32W Lamps)Fluorescent Lamp5,000 K

Ra 84IP 65ExdnA B+H2T3XAluminum die castingMelamine resin baking finish Approximate Munsell color 10YR7/1Entries: 4 ways with 3 plugsApprox. 13.5kg(AGAC45241)

Lamp

Provided with an inverter to ensure higher efficiency and save more energythan when a copper-iron ballast is used.

Excellent in corrosion-resistance, robustness, and air and water tightness.

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°250

50100

150200250

50100

150200

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°250

50100

150200250

50100

150200

MountingType

Pipe Pendant (short)Pipe Pendant

○○

○○

-○

BracketSpecial Pipe Pendant

Pipe MountingStanchion

Pipe Pendant (short)Pipe Pendant

○○

○-

-○

BracketSpecial Pipe Pendant

Pipe MountingStanchion

LGAA066(33W type)LGAA064(22W type)

LZIA33040(Separate Control Unit )LZIA33049(Built-in Control Unit)

AGAC452(two 45W Lamps)AGAC322(two 32W Lamps)

Pipe Pendant (short)Pipe Pendant

○○

○○

○○

BracketSpecial Pipe Pendant

Pipe MountingStanchion

Pipe Pendant (short)Pipe Pendant

○○

○○

-○

BracketPole Mounting

Pipe MountingStanchion

Pipe Pendant (short)Pipe Pendant

○○

○○

-○

BracketSpecial Pipe Pendant

Pipe MountingStanchion

A-AB-B

Distribution on the plane vertical to the pipe axisDistribution on the plane horizontal to the pipe axis

Pipe Pendant (short)Pipe Pendant

○○

○○

-○

BracketSpecial Pipe Pendant

Pipe MountingStanchion

123

456

789

Rated VoltageFrequencyPower Consumption

Luminous FluxEnergy EfficiencyLight Source

Correlated Color TemperatureGeneral Color Rendering IndexDegree of Protection

101112

1314

■Equivalent to one FHF32W (high power) lampExplosion proof type LED Lighting Fittings

IP 65Degree of protection

60,000 hLamp Life

LZIAseries

Explosion proof type LED Lighting Fittings■Equivalent to a 400W mercury vapor lamp

LGLAseries

■Equivalent to an incandescent 100W lamp

Explosion proof type LED Lighting Fittings

LZTA19181

Explosion proof type LED Lighting Fittingsfor Inside Inspection■Equivalent to an incandescent 100 W lamp for inside inspection

TGAC361

123

456

789

Rated VoltageFrequencyPower Consumption

Lamp FluxEnergy EfficiencyLight Source

Correlated Color TemperatureGeneral Color Rendering IndexDegree of Protection

101112

Type of ProtectionBody Material Finish

1314EntriesWeight

Exed B +H2T4

Zone1/2Hazardous Area

Type of protectionExed B +H2T4

Zone1/2Hazardous Area

Type of protectionExed B +H2T4

55□120

998 200

35

300190 310

372 282

310

372 282

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°500

100200

300400500

100200

300400

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°500

100200

300400500

100200

300400

25

110

295

φ196

12

122120°

φ197

R76.5

φ107

φ178158

60°

60°

R79

φ102

12

158

218

500

100200

300400500

100200

300400

13428 180

35

335190

55□120

442

24040Controller support

450

φ39818.5

Energy Saving Long Life Mercury-free Free of UV/IFrays

Low Insect-attractivenessEnergy Saving Long Life Mercury-free Free of UV/IF

rays Low Insect-

attractiveness

Type of ProtectionBody Material Finish

EntriesWeight

Terminal boxbuilt-in type

available

MountingType

MountingType

MountingType

MountingType

MountingType

Terminal boxbuilt-in type

available

Terminal boxbuilt-in type

available

Terminal boxbuilt-in type

available

●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

*Pipe Pendant (short)

A-AB-B

Distribution on the plane vertical to the pipe axisDistribution on the plane horizontal to the pipe axis

A-AB-B

Distribution on the plane vertical to the pipe axisDistribution on the plane horizontal to the pipe axis

A-AB-B

Distribution on the plane vertical to the pipe axisDistribution on the plane horizontal to the pipe axis

Page 4: The explosion protection recom- Explosion proof type … proof type Lighting Fittings Explosion proof type Control Boxes SEIWA offers industrial lighting products with high Japanese

●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

*Special Pipe Pendant●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

*Special Pipe Pendant

●Protection Guard(option)

●Protection Guard(option) ●Protection Guard(option)

AZACseries ANPAseries

Explosion proof type Ceramic Metal Halide Lighting Fittings

Explosion proof type Control Boxes

Other Devices

Control Units for Control Box

Explosion proof typef High-Pressure Sodium Vapor Lighting Fittings

AC100~242V / AC220V50/60Hz / 50Hz91W(two 45W Lamps) 69W(two 32W Lamps)4,950 lm×2(two 45W Lamps) 3,520 lm×2(two 32W Lamps)109 lm/W(two 45W Lamps) 102 lm/W(two 32W Lamps)High-frequency Fluorescent Lamp 5,000 K

Ra 84IP 65Exde CT5Body: Aluminum alloy, Lamp protective cover: Hard glassApproximate Munsell color 10YR7/1 M20×1.5Approx. 13kg

1234567

891011121314

1234567

891011121314

1234567

891011121314

1234567

891011121314

Explosion proof type FluorescentLighting Fiitings

Explosion proof type FluorescentLighting Fiitings

Zone1/2Hazardous Area

Zone1/2Hazardous Area

Zone1/2Hazardous Area

Zone1/2Hazardous Area

IP 65Degree of protection Type of protection

Exde B +H2T3X

YZ32RZ/G-HFFHF32EXLamp YZ32RZ/G-HF YZ36RZLamp

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°250

50100

150200250

50100

150200

CM360~190F・LLamp NH360~180F・LLamp

Zone1/2Hazardous Area

IP 65Degree of protection Type of protection

Exde CT5

AC100~242V / AC220V50/60Hz / 50Hz90W(two 45W Lamps) 73W(two 36W Lamps)4,700 lm×2(two 45W Lamps) 2,520 lm×2(two 36W Lamps)104 lm/W(two 45W Lamps) 69 lm/W(two 36W Lamps)High-frequency Fluorescent Lamp 5,000 K

Ra 84IP 65ExnAd CT4Body: GRP, Cover: Polycarbonate RAL7032M20×1.5Approx. 5.5kg

Zone2Hazardous Area

IP 65Degree of protection Type of protection

ExnAd CT4

SZABseries NZABseries

Ra 85IP 65Body:Exde B+H2T3X Ballast: Exse T4XAluminum alloyMelamine resin baking finish Approximate Munsell color 10YR7/1 Entries: 4 ways with 3 plugsApprox. 18.0kg(SZAB36941 200V )

Zone1/2Hazardous Area

IP 65Degree of protection Type of protection

Exde B +H2T3X

Ra 25IP 65Body:Exde B+H2T3X Ballast: Exse T4XAluminum alloyMelamine resin baking finish Approximate Munsell color 10YR7/1 Entries: 4 ways with 3 plugsApprox. 18.0kg(NZAB36941 200V )

AC 200V 220V 230V 240V50/60Hz390W(CM360F・L)37,000lm(CM360F・L)94.9 lm/W(CM360F・L)Ceramic Metal Halide Lamp4,000 K

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°250

50100

150200250

50100

150200

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°125

2550

75100125

2550

75100

180°

120°120°

150° 150°

90° 90°

60° 60°

30° 30°

0°125

2550

75100125

2550

75100

ANPA452(two 45W Lamps)ANPA451(one 45W Lamp)ANPA362(two 36W Lamps)ANPA361(one 36W Lamp)

AZAC452(two 45W Lamps)AZAC322(two 32W Lamps)

Pipe Pendant (short)Pipe Pendant

○○

○○

-○

BracketSpecial Pipe Pendant

Pipe MountingStanchion

Pipe Pendant (short)Pipe Pendant

○○

○-

○○

BracketSpecial Pipe Pendant

Pole MountingStanchion

Pipe Pendant (short)Pipe Pendant

○○

○-

○○

BracketSpecial Pipe Pendant

Pole MountingStanchion

Pipe Pendant (short)Pipe Pendant

○○

○○

-○

BracketSpecial Pipe Pendant

Pipe MountingStanchion

Used to control the power supply for a pump or mixer in a hazardousarea where explosion or corrosion may occur. For a combination of control units and their specifications, please feel free to consult us.

ZE1A

ZERAZBP・ZMBP

ZCGS

IP 65Degree of protection

Type of protectionExde CT5

ZE2A

IP 65Degree of protection

Type of protectionExde CT5

ZE5A ZS

IP 65Degree of protection

Type of protectionExde CT5

ZE6A

IP 65Degree of protection

Type of protectionExde CT5

Type of protectiond2G5

Type of protectiond2G5

ZEBA

IP 65Degree of protection

Type of protectionExde CT5

ZECA

IP 65Degree of protection

Type of protectionExde CT5

Type of protectionExd BT5

*Information in this brochure is as of May 2013. It is subject to change without notice.

For ordering or further information, please contact us.http://www.seiwa.co.jp

Head Office:36, Shin-ike, Terada, Joyo, Kyoto Prefecture, 610-0192 JapanTel.81-774-55-8181 Fax.81-774-58-2034

Tokyo Branch:Izumikokusaisangyo Bldg, 3-3 Kanda-Mitoshirocho, Chiyoda-ku, Tokyo, 101-0053 JapanTel.81-3-5217-2115 Fax.81-3-5217-2112

SEIWA ELECTRIC MFG. CO., LTD.

You can use this brochure as a poster.

取付形状

1386

176

188

696

40

156

170

12

取付形状

1292

176150

174

122

852

40

φ298

327

852

40

φ298

327

AC 200V 220V 230V 240V50/60Hz390W(NH360F・L)45,000 lm(NH360F・L)115 lm/W(NH360F・L)High-pressure Sodium-Vapor Lamp2,050 K

MountingType

MountingType

●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

*Pipe Pendant (short)

●Dimensions (in mm)

●Light Distribution (in cd/1000┍m)

*Pipe Pendant (short)

A-AB-B

Distribution on the plane vertical to the pipe axisDistribution on the plane horizontal to the pipe axis

A-AB-B

Distribution on the plane vertical to the pipe axisDistribution on the plane horizontal to the pipe axis

High-brightness lamp that provides higher efficiency and color renderingindex and longer life than a mercury vapor lamp.

A highly efficient high-pressure sodium vapor lamp that ensures high costperformance.

Stanchion type available.One-unit wall-mounted type Two-unit wall-mounted type

Six-unit wall-mounted type 24-unit wall-mounted type

Five-unit wall-mounted type

Nine-unit wall-mounted type

Indicator

Fail-safe GuardVariable Resistor Buzzer

Keyed SelectorSwitch

Cam Switch

Push LockPushbutton Switch

Pin LockPushbutton Switch

Selector Switch

Pushbutton Switch Ammeter/Frequency Meter

Fail-safe Cover(Switch Type)

Flameproof Type Plug Socket Explosionproof Cable GlandFlameproof Circuit BreakerFlameproof Motor Breaker

This brochure is printed in eco-friendlyvegetable-oil based ink.


Recommended