2
The Formwork Experts. Framed formwork Framax Xlife A formwork system sets new standards formtechinc.com
| Date post: | 17-Apr-2018 |
| Category: |
Documents |
| Upload: | phungtuong |
| View: | 221 times |
| Download: | 1 times |
The Formwork Experts.
Framed formwork Framax XlifeA formwork system sets new standards www.doka.comformtechinc.com
Art.
no. 9
3145
3714
// 1
2/20
13 e
n-US
, NAM
Fast Workingthanks to optimized design
Framax Xlife speeds up progress on your site with its � small number of easy-to handle component parts � quick lightweight clamp - only a hammer is required for assembly
� versatile tie solutions, taper ties, she bolts or thru-rods with tubes
� gang ability to fly entire pre-assembled units with one pick into place
� fast assembly that is consistently over 100 sq. ft. per man-hour
Consistent Concrete Finishthanks to superior product quality
Highly economical thanks to � 7/8 thick Xlife plywood that provides a consistent finish � 7/8 thick Xlife plywood that is sealed in the frame with hot caulking & attached with screws from the back
Innovative Systemthanks to detailed design specific to the US & Canadian market place
Save time in the details thanks to � imperial dimensioned corner panels so there is no need to convert from inches to millimeters to form the details
� stripping corners that allow for relief in a core at one location � universal panels for up to 42" columns at 1880 psf � hinged universal pilaster forms for fast stripping of gangs between pilasters
� steel filler panels to eliminate wood fillers
High Safetyfor your site
The accident risk is reduced, and legally compliant working conditions are ensured, by having � six safety tie off handle connections that are built into every panel and meet OSHA requirements
Outstanding concrete surface No fracturing of the surface when nails pierce the Xlife panel face
A formwork system sets new standards
Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 6" (15 cm) increment-grid, no matter whether the panels are stood upright or on their sides. All the connectors and accessories fit seamlessly into this grid – making for fast forming-times and high efficiency.
USA | T 877-365-2872 | [email protected] | Canada | T 866-923-6629 | [email protected] | www.doka.com
Xlife sheet
Birch plywood
48575 Downing StreetWixom, MI 48393 800.876.4857 [email protected]
formtechinc.com
