+ All Categories
Home > Documents > The Gutter Guzzlers Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn.

The Gutter Guzzlers Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn.

Date post: 16-Jan-2016
Category:
Upload: martin-mathews
View: 212 times
Download: 0 times
Share this document with a friend
Popular Tags:
7
EF 151 Team Project 6 The Gutter Guzzlers Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn
Transcript
Page 1: The Gutter Guzzlers Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn.

EF 151 Team Project 6The Gutter Guzzlers

Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn

Page 2: The Gutter Guzzlers Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn.

The Gutter Guzzlers

Page 3: The Gutter Guzzlers Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn.

IntroductionOur projects goal was to design and build a

contraption that could lift a 1 kg weight 1 meter in the air in roughly 10 seconds

The parts were found around EST 13 and the parts that were bought were cheap and easily found

Page 4: The Gutter Guzzlers Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn.

OverviewThe first step in this design is to fill the top

bucket with about 2 L of water. When ready we simply open the valve that is connected to the bottom of the top bucket so the water will run down the gutter and fill the bucket at the end of the gutter, which will eventually lift the 1 kg weight.

Page 5: The Gutter Guzzlers Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn.

The Contraption

Page 6: The Gutter Guzzlers Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn.

Potential EnergyThe Water – Potential Energy to Kinetic

Energy

The Bucket- Potential Energy to Kinetic Energy

Page 7: The Gutter Guzzlers Jonathan Wallace, Ben Goodrich C.J. Hurt, Richard Bryn.

ConclusionOur contraption took around 6 hours to build

and required help from all of the team, planning took even longer to get it right.

Complication – LEAKSFinally we are done with 151, good luck to

all.


Recommended