When YG-1 introduced the ENMX09 insert it set a new standard for high-feed insert design and performance, but the New ENMX09 takes performance and productivity to a whole new level. With its increased thickness, it’s built to take on tough applications with absolute authority through its reinforced edge design. Its larger diameters provide for higher removal rates and more time-saving performance.
For more information or to find a distributor, call 800.765.8660.
* Offer applies to US stock standard products and cannot be combined with any other offer or special agreements. Other restrictions may apply.
T H E H I G H - F E E D H F4 M I L L A N D T H E N E W E N M X09:
Introducing ...the High-Performance Dream Team from YG-1.
The BEST just got BETTER!
BETTER Process Stability through increased thickness
BETTER Cutting Performance through larger cutting diameter
BETTER Deals:
Reinforced edge design
Wide flank face for strong clamping
Increased thickness
Corner cost-efficiency
Positive rake angle for lower cutting force
Low entering angle for high feed rate
800 - 765 - 8665BEST VALUE IN THE WORLD OF CUTTING TOOLS yg1usa.com
Buy 50 ENMX09 INSERTS for 1-in., 1.25-in. and 1.5-in. END MILLS and 2-in. FACE MILL and
Get a High-Feed HF4 End Mill/Face Mill FREE! *
BUY 70 ENMX09 INSERTS for 2.5-in. and 3-in. FACE MILLS and Get a High-Feed HF4 Face Mill FREE!*
BUY 100 ENMX09 INSERTS for 4-in. and 6-in. FACE MILLS and Get a High-Feed HF4 Face Mill FREE!*