The Nation's Automotive Toolbox Spring 2013

DISTRIBUTED BY:

The Nation’sAutomotive Toolbox ®

2013 Spring Vol.124Prices Valid April Thru June 2013

Your Cousin In The Tool Business!

Incidental Shipping Charges May Be Added to the Selling Price

Get the Full Range of 3/8” Full Polish Drive Sockets!

Tighten Or Loosen Quickly With a Flip of the Reversing Lever

FREE 4 Piece Metric Add On Set & Rack(Value $129)

FREE

FREE 34 Piece Quick Chuck Bit Set with Purchase

KD8055056 Piece 3/8” Drive SAE & Metric Socket SetGearwrench Technology Allows for the Socket to Withstand Increased Leverage Where Higher Torque is Needed• Full size polished and stubby ratchets features low profile heads• 6 Point sockets includes: 1/4” - 1” Standard and 1/4” - 7/8” Deep Sockets, 6 - 19mm Standard and Deep Sockets • Ratchet, 3” and 6” Extension and Universal Joint

$179.95

KD962012 Piece Reversible Metric Ratcheting Wrench SetFully Polished Hardened Steel Resists Corrosion and Incidental Damage • Surface drive eliminates fastener rounding on the open end • 72 Tooth ratcheting gear - only 5° swing to move the fastener • Sizes 8 - 19MM FREE 4 Piece Topper Set Included with purchase

$179.65

Sizes 21, 22, 24, and 25mm in a 16 Slot Wrench Rack

VG544TIdeal for Use in Steel Fabricating and Body Shop Repair• Hardened teeth and jaw tips are designed to grip from a multitude of different angles • Clamping Set Contains: (1) 10R®, (2) 11R®, (2) 6R® Locking Pliers and T-shirt

$99.955 Piece Vise Grip Welding Set

DWDCS310S13 POSITION CORDLESS SAWKeyless lever-actionblade clamp for quick blade changes• (1) 12V MAX* Li-Ion

Battery Pack and charger

$199.95

FREESee Page 118

Features Safety Quick Change Bit Chucks

FREE 34 Piece Cordless Tool

Driver Set(Value $75)

FREE

FREEEach Set Includes 6 Point Sizes 3/8” - 3/4”

and 10 - 19mm Universal Sockets

FREE 3/8” SAE and Metric 6 Point Flex Socket Sets (Value $185)

Now You Have a Cousin in the Tool Business!

The Nation’s Automotive ToolboxThe Nation’s Automotive Toolbox®

TABLE OF CONTENTSAC Repair ...............................................2-12 AC Disconnects ........................................17 Air Brush ....................................................98 Air Hammers .................................92,93,110. Air Line ...............................72,96-98,10.6-10.9 Air Operated Rivet Guns ..........................80. Air Ratchets ......................................110.-113 Angle Drills ..............................................115. Antifreeze ..................................................14 ATF Repair ............................................17,42 Auto Dark Helmets ....................................78 Axle..................................................25.,29,32 Axle Jacks .......................................45.,47,48 Ball Joint ...............................................25.-27 Battery Service .....................................5.2-5.8 Bead Breaker ............................................38 Bearing ..................................20.,23,25.,27,29 Bench Grinders .........................................5.1 Bit Sets ................................115.-116,125.,139 Blow Guns ...............................................10.9 Body Picks .................................................73 Body Repair .........................................70.-98 Booster Pacs .............................................5.5. Borescope .................................................63 Brake Repair .........................................28-36 Brass Punch Sets .......................................79 Brushes .............................................10.4,10.6 Bucket Pumps ......................................39,40. Caliper Tools ........................................33,34 Cam/Timing Tools ...............................19,20. Carts ...................................................99,10.0. Chain Hoists ..............................................5.1 Chassis Repair ................................24-27,64 Chisels .............................................69,70.,79 Circuit Testers .......................................64,65. Cleaning ...................................10.2,10.4-10.6 Clutch Tools ...............................................30. Code Readers .....................................60.-63 Collision Repair ....................................72-74 Compression Testers .................................19 Compressors ..........................97,98,110.,111

Cordless ...........................................112-118

Couplers ..........................................10.6-10.8 Crankshaft ...........................................20.-24 Creepers ............................................99,10.0. Cut Off Tools .........................................89-91 Cutting Kits ................................................75. Cutting Pliers ...............................80.,126-130. Cylinder Bore .......................................33,34 Dent Pullers ..........................................71,73 Detailing ...............................................85.-87 Diagnostic ............................................5.3-63 Dial Indicators ......................................33,34 Die Grinders, Acces. ............................88-94 Disconnects ....................................17,24,31 Door Tools .............................................81,84 Drilling .......................................114-116,125. Drip Pans ...................................................42 Drop Lights .......................................119,120. Electrical Test..............................5.2-5.6,64-66 Engine Ear .................................................64 Engine Repair .......................16-24,28,29,5.0. Engravers ..................................................69 Exhaust ...................................................2,29 Extension Sets .........................................137 Extractors.....................................76,131-133

Fan Clutch ...........................................22,28 Fasteners ...................................................83 Fault Finders .........................................62,63 Files ..........................................................126 Filter Crusher .............................................44 Filter Wrenches .....................................43,44 Filters,Air ....................................................94 Flange Tools ..............................................80. Flaring .............................................10.,35.,36 Flashlights .....................................1,121-124 Flex Hones ............................................29,38 Fluid Transfer ........................................39-44 Freon Detectors ........................................11 Front End ...................................................27 Fuel Service ..........................................17-19 Funnels ............................................15.,42,43 Fuses .........................................................64 Gasket Punch ...........................................23 Gasket Scrapers .......................................89 General Purpose Shop Tools ...............28,29 Generators, Inverters .............................3,83 Glasses ....................................................10.3 Gloves ................................10.1,10.2,10.4,10.6 Grease, Lube ..................................39-42,66 Grinders .....................................5.1,86,87,90. Hammers and Striking Tools ...........71,71.73 Head Bolt Sockets.....................................23 Headlight Aiming....................................10.5. Heat Guns/Heaters .............................. 3, 82 Hex Bit Sets ................... 29, 135.,136,139,146 Hole Saws ..................................................75. Hose and Acces. .............................10.6-10.8 Hose Clamp Pliers ....................................14 Impact Sockets ................................146-15.2 Impact Wrenches ............................110.-117 Import Specialty ..................................19-24 Jacks and Stands .....................................47 Jacks and Stands ................................46-49 Knives ..................................................12-.13 Leak Detection .........................................24 Lighting ............................................119-125. Magnets ...............................................67,68 Manuals ....................................................64 Measuring .......................................33,34,72 Mirrors ...................................................67,68 Motorcycle Tools .......................................23 Multimeters ..........................................5.7-62 Needle Scalers .......................................110. O Rings .................................................64,66 OBD II....................................................5.9-62 Oil Change ..........................................41-44 Oxygen Sensor .........................................23 Paint Equip ...........................................95.-98 Parts Kits ..........................................64,66,83 Parts Trays ................................................134 Parts Washers ..........................................10.4 Picks ...........................................13,15.,67,68 Pilot Bearing Pullers and ..........................23 Pipe Plug Sockets ................................43,44 Pipe Wrenches ..........................126,130.,131 Pliers .......................................66,80.,126-130. Polishers ..........................................86,87,90. Porta Power ...............................................72 Power Probe .........................................62,63 Pressure Testers .........................................15. Pressure Testers ....................................14,15.

Pressure Washers ................................... 10.5.,10.6 Pry Bars ............................................................ 70. Pullers .................................................... 20.,21,27 Pumps ................................................... 30.,39,40. Punches ................................................ 70.,79,81 Radiator ..................................................... 13-15. Radio Tools ...................................................... 68 Ratchets ................................... 138,143,147,149 Razor Scrapers ........................................... 66,84 Regulators ....................................................... 94 Rivet Guns ............................................. 74,80.,81 Safety ............................................................ 10.3 Sand Blasters .................................................. 88 Sanders .............................................73,74,87-90. Saws ............................................. 75.,87,115.,118 Scan Tools ................................................. 5.8-63 Scrapers ................................................ 66,69,84 Screw/Nut Drivers .................................. 132-135. Serpentine ...................................................... 22 Sharpeners ..................................................... 13 Shoes............................................................. 10.2 Shop Equipment..................................... 2,14,15. Short Testers ............................................... 62,63 Slide Hammers........................................... 20.,71 Smoke Machines ............................................ 5.8 Snips ...................................................80.,126-130. Socket Holders ....................................... 143,145. Socket Sets ................................137-143,146-15.2 Soldering .................................................... 82,83 Spark Plug ........................................... 16,18,148 Spot Weld ................................................... 75.,80. Spray Guns ................................................ 96-98 Sprayers .......................................................... 45. Stethescopes .................................................. 64 Strut ............................................................ 25.,27 Stud Welders ................................................... 77 Suction Cups .................................................. 74 Tap and Die .................................................. 131 Tarps ................................................................ 96 Test Leads .................................................. 64,65. Thermometers ................................................... 8 Thread Repair ..................................... 16,32,131 Tie Rod ....................................................... 25.,26 Tire Repair ...................................31,33,36-39, 66 Tool Boxes ................................................. 99,10.0. Tool Holders ........................................... 143,145. Torches .................................................. 78,82,83 Torque Multipliers .................... 140.,144,148,149 Torx .....................................................28,133-137 TPMS ................................................................ 63 Trailer Tools ...................................................... 45. Transmission .....................................17,30., 45.,49 Triple Square .......................................... 135.,139 Tubing Tools ........................................... 10.,35.,36 Unlocking Tools ............................................... 69 UV Detection ..................................................... 6 Vacuum Pumps ................................................ 3 Vacuums ................................................ 10.4,10.6 Vise Grips ......................................80.,81,126-128 Vises ................................................................ 5.1 Washers .................................................. 10.4-10.6 Welding ...................................................... 75.-78 Wheel Sockets ............................... 32,38,39,136 Window Tools ........................................ 74,81,84 Wire Strippers .....................................65.,127-130. Wrenches .........................................131,139-143

Newark, NJ - Charlotte, NC

1




GREAT VALUES FROM TRUSTED BRANDS

Choose from Vacuum Ready or Standard Styles!

MAX Sanders Offer Comfort With Less Vibration and its Lightweight Ergonomic Design• MAX Power — Powerful 0.27 hp motor and variable-speed regulator, with double bearing design • Exhaust silencer includes a multi-stage noise suppression filter • Ergonomic grip is uniquely designed with an anti-slip rubber compound

UV414565

UV ReChaRgeable Spot gUn leak kit

$204.31 OT7196

UniVeRSal CRank & Cam Seal SeRViCe kitRemoves and Installs Camshaft and Crankshaft

Seals Without Damage. • Kit services seal sizes of 21.5mm to 64mm.

$184.12 CV526

Flange type axle & FRont Wheel hUb pUlleRFor use on Cars and Light trucks. • Range is 3-3/4” to 4-1/2” for use on 4,5,

or 6 bolt stud design and all non-C lock GM axles

$30.75

Features the NEW UV PhazerRechargeable LED Lightand Services up to 64 Vehicles• Includes components and dye for R-12 and

R-134a systems.

CV559

pink mini batteRy JUmp StaRteR10 Jumps on a SingleCharge with 900 Peak Amps• Features built-in charging circuit with

automatic shutoff and 10 watt halogen spotlight

$112.82 FL4253599

Vt02 ViSUal iR theRmal temp imageRGet the Complete Picture with

a Blended Visual and Thermal Image of the Target Area

• Detect Issues Instantaneously

$1,147.44 PT011289210

plaStiC bUtane Welding kitRepair All Types of PlasticDamaged Parts in Any Industry!• Great for motorcycle fenders, snow mobile, off road, hobby, home and more!

$177.36

WS47009

ConVeRtible CReepeR oR Seat 40” Fully Padded CreeperMetal Frame Creeperwith Push-Pin Releasefor Easy Conversion toRolling Seat• Made in the USA

$188.00 TLXTLF-NF31D-BLK

1000 lUmen ReChaRgeable led light

Random orbital Sanders with pSa or hook and loop pads

Three Modes of Brightness: 1000 lumens / 500 lumens / <100 lumens with a Beam Distance of 705 ft.

• Length 9 3/4” FREE Gift Card with Purchase

$189.00 SK7412

3 Side adJUStable plieRSDesigned for use on Round Objects Providing

Three Points of Contact for a More Aggressive Grip

• Handles sizes 1/2” - 4”

$53.95

$10.00

Item # Cutting Motion Speed Vac Pad Price

IR8101MAX 3/32” 0-11500 No PSA $266.42

IR8102MAX 1/16” 0-10500 No PSA $266.42

IR8103MAX 3/8” 0-9500 No PSA $266.42

IR8201MAX 3/32” 0-11500 Yes H&L $257.19

IR8202MAX 1/16” 0-10500 Yes H&L $257.19

IR8203MAX 3/8” 0-9500 Yes H&L $279.55

Seasonal

Pages 2-11

Engine Service Chasis/Brake/Tire

Body RepairDiagnostic/UtilityBattery/Lube/Lifting

Storage/Power Tools Lighting Hand Tools

Pages 12-24 Pages 25-39

Pages 71-98Pages 57-70Pages 40-56

Pages 119-124 Pages 125-156Pages 99-119

2




SEASONAL AND SHOP PRODUCTS

Port-a-Cool Evaporative Coolers are completely assembled and ready to operate, right out of the box. They are made using one-piece molded plastic polyethylene housing which eliminates leaking and rust.• The First Choice for use in Professional Sports. Just use a 3/4” garden hose connection to supply the water to cool your zone.Item # Fan Speeds CFM Amps Cool Area Sq’ Water Price

PAC2KCYC01 Personal 2 3400/3000 5.6 700 16 $1,078.83

PAC163SVT 16” 3 2500/3300/3900 5.3 900 42 $1,732.76

PAC2K361S 36” 1 9600 12.4 2500 32 $2,821.15

PAC2K482S 48” 2 11000/20000 13.7 4000 40 $4,689.96

MADE IN U.S.A.

evaporative Cooling Stations

SP1030200

1600 CFm poRtable aiR bloWeR• Features 3 speed air control, 2 operating positions, and 30 ft. power cord, cord wrap for easy storage, • 1/2 Peak HP

$386.17

WoRld Wind 3 Speed Fan3-Speed Fan Switch, Built-in overload protection• Moves air up to 300 CFM,• Heavy duty, industrial fan for indoor or outdoor use• Heavy Duty 3-Prong Plug with 14AWG x 3C Gauge Wire.• 8.5ft. Cord CSA approved• Plastic pads prevent scratching or damage to work surface and blower unit• Sturdy handle (2) 110V AC outlets

PACCYC02

CyClone 2000 poRtable Cooling StationWhat a Great Way to Keep Your Immediate

Work Area Cool! This Unit Will Lower a 500 Square foot Area up to 30°

• Uses standard 120 Volt AC Power• 2000 CFM, with an 8 Gallon reservoir• Water level sight tube and sump drain• 3/4” garden hose connection for longer

running• Cools without chemicals or refrigerants• Dimensions 24” wide x 35” deep x 31”

height

$793.25

SP1032100

3 Speed aiR moVeRThe heavy-duty Professional AirMover is designed to power up to 500 CFM• Features 3 speed air control• Cord Length: 10 Feet

$93.35

Item # Style Size Self Con. Price

EXACT400DYNO High Heat 4”x11’ No $295.10

EXACT500 Standard 5”x11’ No $332.97

EXACT600 Standard 6”x11’ No $420.53

EXAFLT250 Flared End 2.5”x11’ Yes $120.95

EXAFLT300 Flared End 3”x11’ Yes $146.13

EXAFLT350 Flared End 3.5”x11 Yes $149.96

EXAFLT400 Flared End 4”x11’ Yes $235.21

exhaust tubing hoses

AO8710 $87.43

160powder

Free

100powdered,

latex

100powdered,

nitrile

160powder

Free

50powdered,

latex

Item # Size Mil Price

SS6591 Small 5 $10.08

SS6592 Med. 5 $10.08

SS6593 Large 5 $10.08

SS6594 XL 5 $10.08


SS6602 Med. 14 $20.00

SS6603 Large 14 $20.00

SS6604 XL 14 $20.00

SS6605 XX-L 14 $20.00


SS6607 Med. 5 $14.82

SS6608 Large 5 $14.82

SS6609 XL 5 $14.82

SS6610 XX-L 5 $15.29


SS66516 Small 6 $18.11

SS66517 Med. 6 $18.11

SS66518 Large 6 $18.11

SS66519 XL 6 $18.11

RaVen blaCk, textURed gloVeS With beaded CUFF nitRile deRma-lite blUe, textURed W/beaded CUFF

thiCkSteR textURed blUe goVeS ValUe-toUCh, Smooth gloVeS With beaded CUFF


SS650-1001 Small 8 $18.27

SS650-1002 Med. 8 $18.27

SS650-1003 Large 8 $18.27

SS650-1004 XL 8 $18.27

dyna gRip textURed latex gloVeSSuperior Puncture &Abrasion Resistance


3




SEASONAL AND SHOP PRODUCTS

Item # CFM Price

CCVP6S 6 $188.72

CCVPC2SU 2 $118.97

CCVPC4SU 4 $153.85

AR75000

dUal aUtomatiC ReCyCle gUaRd FoR R134a• Compatible with all automatic A/C service

equipment• Switches automatically from recover to recharge• High and Low side protection all in one• Traps shavings, desiccant particles, sealant & debris

$463.24

Unit Incorporates High and Low Side Charging

Single Stage Vacuum pumps

automatic and manual aC Recycling machines

Oil-mist preventer exhaust cap keeps the oil in the pump not on the floor. No Hassle One Year Warranty

From Now until July 31, Buy a Robinair Recycling Product (#’s 34288,34788,34788-H or 34988) and receive a free Oil and Filter maintenance kit. Go to robinair.com to claim your free goods. Also enter your new purchase for a chance to win one of 5 cash prizes.

Advance single stage design pulls deep vacuums fast!

AR72161

a/C ChaRge gUaRd FoR hybRid VehiCleS• Eliminates risk of electrical damage caused by

PAG oil entering electric compressors• Incorporates High and Low side refrigerant

charging $530.54

ML91585-B

poRtable eVaCUation/ChaRging StationA lightweight, durable, steel frame cart that contains all the necessary tools to quickly and conveniently charge the A/C system. • Extruded aluminum manifold with long

lasting valve design• 2 1/2” gauges, hoses and manual couplers• 240 lb capacity scale & 6 CFM vacuum pump

$830.65

$3610.86 $5888.59 $3717.95 $4264.96 $4700.85 $4275.93 $5368.80 $5668.24 $6354.48Features CCAR2788S CCFA1234 ML69788-A ML69789 ML69789-H RA34288 RA34788 RA34788-H RA34988

Air Purge Yes Yes Yes Yes Yes Yes Yes Yes Yes

Automatic Automatic Fully Automatic Fully Fully Manual Fully Fully Fully

Database — — Included Included Included — Optional Optional Optional

Dye Inject — — — — — — — — Yes

Flush — — — — Yes — — — Yes

HFO Freon — Yes — — — — — — —

Hybrid Yes Yes — — Yes — — Yes —

LCD Display Yes Yes Yes Graphic Graphic Yes Yes Yes Yes

Oil Injector Yes Yes Yes Yes Yes — Yes — Yes

Printer — — — Yes Yes — — — Yes

Programable Yes Yes Yes Yes Yes Semi Yes Yes Yes

R12/22 Freon — Yes — — — — — — —

R134A Freon Yes Yes Yes Yes Yes — Yes Yes Yes

Tank 50 Lb 50 Lb 30 Lb Int. 30 Lb Int. 30 Lb Int. 30 Lb Int. 30 Lb Int. 30 Lb Int. 30 Lb Int.

Vacuum Pump 6 CFM 6 CFM 6 CFM 6 CFM 6 CFM 3 CFM 3 CFM 3 CFM 3 CFM

Vacuum Test Yes Yes Yes Yes Yes Yes Yes Yes Yes

ML69134-A

134a ReFRigeRant identiFieRThe refrigerant identifier helps to confirm the

quality of 134A refrigerant in A/C system. • Delivers a quick and accurate analysis in a

rugged compact package. • Provides automatic step by step indication of

refrigerant analysis process. 95% pass / fail indication

$863.65

Ra34788-hRa34788 Ra34988CCaR2788S Ra34288CCFa1234 ml69788-a ml69789 ml69789-h

RA34411-B

34788 Sd databaSe inFoRmation Update• Charge capacity is imported to the charge model• No more guessing how much oil to add back when replacing components.

$245.31

4




AC CHARGING AND DIAGNOSTICS

ML99872-A

ML66661

R134a bRaSS maniFold• Includes Manual quick couplers and 60” hoses

$99.58

Manufacturers Include all major brands.SPECIFICATIONS: Connection: 1/2” acme or 1/4” flare. Battery Life: 50-60 hours continuous use, Low Battery Indicator: Special ICON on LCD

72” digital maniFold Set With VeChiCle SpeCiFiC data

$239.98

ML66661-KIT

aC pRomotional paCkageGet all the basic needs at once with this AC bundle pack. Kit includes:• R134a Brass Manifold, 60” Hoses, Economy Couplers • Air Operated Light Duty Vacuum Pump • 3-IN-1 Side Mount Can Tap Valve • Universal Valve Core Remover • 1” Pocket Analog Dial Thermometer 0 to 220?F• Compact UV Leak Locator Kit (53580)• Charging and Depressor Assortment (91207)

$245.13

ML89660-PRO5

alUminUm bloCk maniFold With Site glaSS• Aluminnum site glass block with 60” Hoses in a Plastic Box• Uses Standard couplers designed to work in the tightest quarters. Also can be used with existing R12 hoses and snaps easily to A/C service ports• Includes 85530 3 in 1 can tap tool for use on R-12, R-134a & 2oz oil cans

$128.44

ML89660-UV

alUminUm maniFold and UV dye inJeCtoR paCkage• R134A Aluminnum site glass block with 60” Hoses in a Plastic Box• Uses Standard couplers designed to work in the tightest quarters. Also can be used with existing R12 hoses and snaps easily to A/C service ports• Includes 10 Application Mini Dye Injector

$128.44

ML89661-UV

alUminUm maniFold and UV dye inJeCtoR paCkage• R134A Aluminnum site glass block with 60” Hoses in a Plastic Box• Uses manual couplers with spring loaded depressors and will not damage service valves.

$148.83

FJ6785

R134a alUminUm maniFold pRomo kit• 72” hoses with Manual

Couplers • Includes Thermometer, Valve

Core Remover, and R134a Can Tap in a Plastic Case

$121.75

R134 ReFRigeRant tankS

ML64010

30 LBS R134A Recovery Tank Without Float Switch

$154.22

ML66010

50 LBS R134A Recovery Tank Without Float Switch

$176.45

ML66011

50 LBS R134A Recovery Tank With Float Turn off Switch

$246.11

ML67010

30 LBS R134A Recovery Tank With Float Turn off Switch

$223.90

FJ6761B

R134 alUminUm bloCk maniFold Set• 72” Hoses-Quik Couplers • Aluminum Block Design with

Sight Glass.• Anti-Flutter Design Gauges.• Additional Access Port.

$76.54

RA19740

R134a tank exhale FilteR• Used inline between the tank fill hose and the

virgin refrigerant tank to help prevent any tank debris from getting inside the A/C RRR machine

$76.70

MLC284660-CL

R134a bRaSS 60” gaUge Set• R134A Brass gauge set

with 60” hoses, Heavy duty manual couplers, protective gauge guards and flutter free gauges

$88.79

MLC289772-CL

R134a alUminUm 72” gaUge Set• R134A Aluminum gauge set

with 72” hoses, Heavy duty manual couplers, protective gauge guards and flutter free gauges

$97.80

MLC293996-PB-CL

delUxe dUal alUminUm 96” gaUge Set• Deluxe Dual R-12 / 134A Aluminum gauge set

with 96” hoses. • Includes heavy duty manual couplers, tank

adapter, gauge guards, flutter free gauges in plastic box

$106.67

ML53010

nitRogen pReSSURe teSt kit• 1?4” SAE flare outlet port, with control valve, to

keep pressure on the regulator at all times• HP gauge 4400 psig (300 bar), LP gauge 1000

psig (70 bar)• Kits come with leak testing gauge and charging

hose$222.67 RA48134A

R134a bRaSS maniFold kit• R134 brass manifold, hose set and service

couplers • 90° manual couplers, 60” R134a Hose Set

$96.83

RA49134A

R134a alUminUm maniFold kit• R134 aluminum manifold, hose set and service

couplers• 90° manual couplers , 60” R134a Hose, case

$113.12


5




AC CHARGING AND DIAGNOSTICS VACUUM PUMPS AND CHARGING EQUIPMENT

90 psi minimum air pressure required. Fitting Size- 1/4” M.F. x 1/2” ACME

ML90062-A

3 CFm VaCUUm pUmpHigh performance single stage with a deep vacuum 3 CFM air displacement with an ultimate vacuum of 75 Microns.• 1/4 Horse Power pump, 1720 RPM

$153.75

ML91200

aiR opeRated VaCUUm pUmp• Requires 4.5 CFM/90 PSI shop air. No moving parts, no oil required, 1.3 CFM air displacement venture type pump will pull up to 29 inches of vacuum (Hg.) at sea level. Includes 1/4” flare (R12) connection and 1/2” ACME (R134a) connection.

$66.86

FJ6900

1.3 CFm aiR VaCUUm pUmp

$35.08

FJ6905

1.5 CFm VaCUUm pUmpTwo Stage Performance Using Twin-Port Technology. Designed for Home & Commercial Use, R12 andR22 Use (1/4” SAE Fitting Included), Automotive R134a Use (1/2” ACME Fitting Included). Includes8oz. of vacuum pump oil

$114.33

FJ6912

5 CFm VaCUUm pUmpTested-Proven-Reliable. Specifications: 5.0 CFM 75 Micron Rating 1/4” M.F. x 1/2” Acme Fitting Size 115V,60 1Ph. 1/3 HP 1725 RPM 8.0 Oz. Oil Capacity

$177.79

Two Stage Performance Using Twin-Port Technology™

ML90066-A

6 CFm VaCUUm pUmp• Powers from a 1/4 horse motor with 75 microns of ultimate pull• Uses maximum single stage power to give the feel of heavier duty pumps

New double piston compressor and cooling by the largest fan and condenser in the market makes the new 69300 series the most complete solution to your recovery needs!• Includes an oil separation module, filter dryer and sight glass• Revolutionary double piston oil-less compressor• Safety high pressure switchFor use with all refrigerants including R410A

$182.60

FJ6909

3 CFm VaCUUm pUmpTwo Stage Performance

Using Twin-Port Technology Lightning Fast Design Removes Moisture and Non-Condensable gases that can destroy any A/C or Refrigeration system Lightweight

• Micron Rating: 75, Fitting Size: 1/4” M.F. x 1/2” ACME. Voltage: 115V, 60 HZ, Motor: 1/3 HP, Motor RPM: 1725,

$144.04

ML90062-A-KIT

teChniCianS Shop aC ValUe paCkAll the components needed for basic AC test and maintenance. This kit includes:• 90062-A Single stage 3 CFM Vacuum Pump • R134a Brass Manifold, 60” Hoses, with Manual Couplers • 3-in-1 Side Mount used on R-12, R-134a & 2oz oil cans • Universal Electronic Leak Detector 55100 featuring multiple Detection levels with Visual Leak Level Indicator

$422.98

ML90059

1.5 CFm VaCUUm pUmp• 1/6 horespower motor • Internal check valve on pump access fitting prevents oil blow out. • Ultimate vacuum 100 microns

$134.52

ML69110

CeRtiFied aUtomotiVe aC ReCoVeRy SyStemThis system is designed to meet SAE J2810 and is compact, lightweight and works with all refrigerants. The unit offers a state of the art ½ hp oil-less compressor with a built-in high volume cooling fan.• Offers a State of the Art 1/2 hp Oil-less Compressor with a built-in High Volume Cooling Fan for Fast Recovery • Designed Certified to meet SAE J2810• Includes Recovery Unit, 30 lb DOT Tank, a 60” Yellow Service Hose, 72” Blue and Red Conversion Hoses, UL Approved High and Low Side R134a Manual Couplers and Oil Purge Bottle

$1,310.99

Recovers and Removes Oil From Refrigerant.

Item # Picture Style Price

ML69300 A Industrial $977.26

ML69360 B Automotive with Tank $1,561.91

tWin tURbo ReCoVeRy maChineS

FJ6916

7 CFm VaCUUm pUmp Single Stage• Cools down as deep and fast a Vacuum as a

two stage pump• Two stage performance using twin-port

technology™• Removes moisture and non-condensable gases • 1/4” M.F x 1/2” Acme, 75 micron rating 3/4

horse, 3450 RPM• Oil Capacity 17 ounce, comes with 2 bottles of oil

$239.92

Item # CFM Price

RA15115 1.5 $118.56

RA15310 3 $162.92

RA15510 5 $214.12

R134a brass manifoldVacumaster Pumps feature 1/4” Flare & 1/2” ACME Intake Ports• Quickly pulls down the system

ML98100

aiR Content analyZeRWhen an A/C system leaks, refrigerant is lost and air enters the system creating inefficient inner AC atmospheric conditions. • Air Content Analyzer can be used

on or off the supply tank for regular monitoring of air that is in the system of tank

$78.79

6




AIR CONDITIONING UV LEAK DETECTION

UV471500

SpotgUn inJeCtion SyStem• Easy Loading Pre-Filled Dye Cartridges• Connects To Low Side Port & Prevents Venting Of Refrigerant Into The Atmosphere, Works With R-12 And R134A Refrigerants• Includes: 1 Universal Dye Cartridge

$152.82

UV332010

• Spotgun jr. Injector, LED• Light, univ. A/c dye cartridge• R-134a adapter, r-12 adapter• Glasses, service stickersUV332220

SpotgUn JR / piCo lite kit• Spotgun jr. Injector, pico-lite• Light, univ. A/C dye cartridge• R-134a adapter, r-12 adapter• Glasses, service stickers

$102.30$74.79

UVIEW OILS & DYE SAE J2297 OEM APPROVED

UV399020 Spot Gun Jr. Replacement Dye $46.75

UV488108E 8 Oz. Ester Oil Cartridge $13.67

UV488125P Pag Oil Cartridge 125 Visc. $13.67

UV499108 Universal 8oz. AC Dye Cartridge $54.42

UV499109 Universal A/C Dye Cartridge with eBOOST $40.44

UV488016P E-Boost Universal Pag Oil with Dye $18.13

UV Leak Detection

SpotgUn JR led lite kit

FLRLD2

UV ReFRigeRant leak deteCtoR FlaShlight• Six UV LEDs • Laser pointer clearly locates center• Three LED flashlight with 100,000 hr LED life

$76.84

BG130221

pRo Shot dye inJeCtion SyStemThe Most Precise and Accurate Injection System on the Market. • The Pro-Shot gun measures exactly 1/8oz of dye• Eliminates over-injection • Includes 8oz cartridge of Stay- Brite Universal AC Dye.

$150.31

FRee!UV Flashlight

FJ618

Contains 12 oz R134a, and 1 oz of Leak Stop withred dye and O’ ring conditioners.• View leaks without the aid of UV lights

$14.82

R134a Red dye pRemiUm ReFRigeRant With leak Stop

FJ9140

R134a Stop leak With Red deteCtion dyeWill only seal holes in rubber hoses & enlarges “O” rings

$6.34

CG946KIT

SUpeR Seal pRemiUm a/C SyStem leak RepaiR kit• Permanently seals leaks in

condensers, evaporators, accumulators, compressors, gaskets, o-rings, metal lines & rubber hoses.

• Professional formula is easily installed

$49.02

RA16234

aC dye inJeCtion SyStem• No guesswork – apre-measured application every time.• One squeeze injects a pre-measure amount

(1/8 oz.) of dye. No more adding too much dye.• Brightest dyes in the industry, exceeds all

industry performance standards• Meets the new SAE J2297 standard for use with

both R134A and R1234YF

$140.52

UV413065

UV-phaZeR ReChaRgeableHigh Power UV LED Fluoresces dye brighter than

the competition• Lithium-Ion battery provides 2 hours of power• Adjustable focus and a rugged aluminum

housing make it super versatile.• Includes charger and UV enhancing glasses

$89.09

UV332005

40 VehiCle phaZeR UV light dye kitUV-Phazer BLACK witha high power True-UV LED (3 AAA batteries)• Spotgun Jr. injection system with R-12 and

R-134a adapters.• Universal A/C dye cartridges (4 x 1oz/30mL)• UV enhancing glasses.• Services up to 40 vehicles, includes Service

Stickers. Rugged storage case

$125.21

UV413075

UV-phaZeR light 3aaaUV Phazer™ Black (AAA Batteries) • High Power UV LED Fluoresces dye brighter than

the competition• Three included AAA batteries provide 3 hours of

power• Adjustable focus and rugged aluminum

housing make it super versatile.• Includes UV enhancing glasses

$77.01 UV414565

64 VehiCle SpotgUn ReChaReable phaZeR kit• Services up to 64 vehicles Includes: • UV Phazer BLACK Rechargeable UV LED Light• Spotgun™ injection gun with R-12 and R-134a

adapters.• Universal A/C dye cartridge (8 oz./240 ml)• UV enhancing glasses• Service stickers. Rugged storage case

$204.31


7




UV LEAK DETECTIONAIR CONDITIONING UV LEAK DETECTION

leak gUaRd aC inSURanCe kit

FUTP8620CS

opti-lite CoRdleSS FlaShlight kit• Power comparable to 50-watt lamps• Inspection range of up to 2 feet (0.6m) or more, 100,000-hour bulb life, Powered by 3 AA batteries and Fluorescence-enhancing glasses included.

$31.43

FUTP8621

UV SyRinge StaRteR kitIncludes: OPTI-Lite™ 6-LED flashlight, Syringe A/C dye injector with hose for R-134a and R-12 adapter/purge fitting, 1 oz bottle co-solvent free universal A/C dye, services up to 4 vehicles, 1 oz bottle Dye-Lite All-In-One standard oil dye, services 1 vehicle, - 1 oz water-based bottle Dye-Lite, coolant dye, services 1 vehicle, 8 oz bottle of GLO-AWAY dye cleaner, fluorescence-enhancing glasses.

$77.80

FUTP8626

opti-lite eZ-Shot dye kit• This Basic AC Starter kit gets the tech diagnosing for leaks more quickly than any other kit made.

$157.42

FUTP8627

eZ JeCt opti lite kitIncludes:TP-8620CS OPTI-Lite™ 6-LED, economy flashlight, EZ-Ject™ injector with universal A/C dye cartridge for servicing up to 14 vehicles, 1 oz bottle Dye-Lite, All-In-One™ standard dye for oil, fuel, ATF, PS and hydraulic leaks, services 1 vehicle, 1 oz bottle Dye-Lite coolant/auto body leak dye, services 1 vehicle and Fluorescence-enhancing glasses and plastic case

$90.86

FUTP8647

optimax JR eZ-JeCt UV kitComplete OPTIMAX Jr /EZ-Ject™ kit – Powerful, Professional and Affordable!• Includes EZ-Ject™ dye injector is the easiest, most accurate and most compact method of servicing a vehicle’s A/C system with dye.

$105.93

FUTP3400-0601 Universal engine oil dye 6 pack $36.92

FUTP3405 Single application oil, fuel, atf universal dye $5.25

FUTP3812 Hybrid A/C Dye Kit Includes 3, specially packaged hybrid dye capsules and injection parts $76.79

FUTP3820-0601 R 134a PAG oil bottles, 6 pack $57.98

FUTP3900-0601 Coolant System Dye for standard coolants, 6 pack $24.44

FUTP3920-0601 Auto Body Leak Check dye 6 pack $27.14

FUTP3940-0601 Dye-Lite® Rite-Blend™ Dye – For Extended Life Coolants! including red/orange or yellow $27.14

FUTP9760-0108 8 Oz. R134A Pag Big EZ Dye Cartridge $62.77

FUTP9770-004CS 4 Oz big ez 32 vechicle universal dye cartridge $51.16

FUTP9770-0108 EZ Cartridge Universal Dye 8 oz Cartridge $62.77

FUTP9875-0601 Universal R-134a, Mini-EZ cartridges 6 pack $32.99

AC Dyes meet standard J2297

SG51018

tWin-taSk 3CUV titaniUm• Combination of 6 UV LED’S and 1 Xenon Bulb • 3 Modes of Lighting. Push-button switching • Uses 3 C Alkaline Batteries

$55.79

UV480300

• LeakGuard permanently and safely seals A/C leaks in both rubber and metal components. • It works by seeking out the oxygen present at the leak point. When combined with the pressure in the system, LeakGuard™ is pushed through the leak causing it to congeal and form a permanent chemical weld at the leak point.

$77.56

Get Your Customers On The Freon Insurance Plan

Item # LED Power Price

ML53512-UV 12 AAA $27.69

ML53517-UV 17 AAA $38.56

True UV flashlights constructed of Heavy duty aircraft aluminum, easy grip texture with anodized finish. UV glasses and batteries included.

dual power Uv light

CG88DC

UV pUSating aCtion lightPulsating light makes finding UV dyes easier• Adjustable focal lengthdetects leaks up tp 20 • On/off strobe function• Uses 3 x AAA battery powered (included).

$33.54

ML53518-UV

dUal poWeR UV lightRechargeable UV Flashlight• Twist the handle to zoom the UV light in or out• AAA battery holder provides backup power to

flashlight (3 AAA batteries included)• Battery Life: 3 to 5 hours continuous leak

detection• Includes safety glasses• 154 - 170 µW/cm2 which is compatible to a 50

watt UV flashlight• Battery: Lithium Li-Ion, full discharge and cut-off

discharge of 4.2V and 2.75V • 53518-UV includes 110V charger

$88.91

8




THERMOMETERS AND AC SERVICE TOOLS

Popular Parts Kits

TZ45201 270 Piece HNBR O-Ring Assortment $8.18

TZ45202 407 Piece SAE O-Ring Assortment $17.21

TZ45203 419 Piece Metric O-Ring Assortment $17.21

FJ6070

• Contains 50 pieces Fits all brand name aftermarket hoses for R12/R134

$23.41

B

C

D

FJ2850

eConomy SCale• 9” x 9” platform• 175 lb. capacity

$147.88

RA18576

• 4 stems, 6 o-rings, 14 mm, 12 stem o-rings.• 12 valve core depressors, 12 hose gaskets, 1/4”.• 6 Quick SealTM o-rings for R-134a., 2 caps with straps, 1/2” Acme.. O-ring lubricant. Valve core remover/installer. 4 color-coded Lexan® handwheels and screws. Set of R-134a coupler o-rings, high- and low-side.

$90.07

R134a popUlaR paRtS kit

UniVeRSal ChaRging hoSe RepaiR kit

MostPoplular

ML98210-A

aCCU-ChaRge ii pRogRammable ReFRigeRant SCale• Charge Programming allows user to program

desired quantities• Before charge is complete, an alarm will sound

allowing user ample time to turn off refrigerant supply.

• Allows user to know the amount of refrigerant that is left in the tank at any time

• Capacity of 240 lbs, removeable platform

$234.65 ML98300

SmaRt ChaRge aUtomatiC FReon SCale• Program and automatically transfer refrigerant

to and from the A/C system.• Over 700 models of cars from around the world

is contained in the scale’s memory.$525.96

ML98230

ChaRging Solinoid modUleCharging Module turns theML98210 ACCU-CHARGE II into an Automatic

Programmable Scale. • Module allows the user to control the exact

amount of refrigerant.• Includes a short hose for tank connection, USB

cord, & 1/4” FL-1/2” ACME adapter

$179.13

pocket and handheld thermometers

A

Item # Style Range Notes Price

Pocket, Digital, and Laser Non-Contact ThermometersRA10597 A Pocket 0-220F 1” Small Face Analog $10.72

RA10945 B Pocket 0-220F 1.75” Large Face Analog $13.11

RA43230 C Pocket -40 to 390F Digital Dual Degree $31.10

ML52220 D Pocket 0-200F Small Face Analog $8.66

ML52223-A E Pocket -58 to 302F 1” Digital Face $24.24

ML52224ASP F Infra-Red -58 to 932F Laser sighting non contact. Includes #52220 in carry case $61.39

ML52225-A-SP G Infra-Red -83 to 1400F Laser sighting non contact. Includes thermocoupler to contact measure up to 1900F $149.95

ML52224-C H Infra-Red -58 to 932F Dual Laser sighting non contact $68.72

RKMT6 I Infra-Red -20 to 932F Laser sighting non contact. 10:1 ratio at focus point. Includes case $86.99

RKST25 J Infra-Red -25 to 999°F Smart sight Dual Laser sighting non contact. 16:1 ratio at focus point. Includes case $135.86

LG13800 K Pocket -58° to 572° F Folding probe, magnetized backing for hands-free operation. $22.86

LG13801 L Infra-Red -76° to 1022° F Dual laser w/12:1 true spot technology. Water resistant, Hi/Low alarms $114.79

LG13802 M Infra-Red -58° to 1200° F UV work, features 12:1 distance / spot ratio with max capture $109.21

Use there thermometers for various diagnostics for AC, Brake, Engine and Chassis Repair. Most digital units measure in dual modes.

Top quality components packed in an easy pick package• Contains the most popular sizes

E

F G

H I J K

Item # Type Price

ML98310 Wireless Refrigerant Scale $275.19

ML98315 Wireless Refrigerant Scale with Solenoid $380.77

Wireless unit prevents unwanted tangles in wires• Tank capacity feature allows user

to know the amount of refrigerant in the tank at any time.

Wireless Refrigerant Scales

L M

Item # Pics. Use Price

ML81290 A R134A Large Bore Valve Core Remover $8.47

ML81490 B R134A Under Pressure Remover and Replaces $53.01

ML91290 C Universal Valve Core Remover $8.47

B C

A

Valve Core Removal tools

MLC298210-CL

220lb eleCtRoniC ChaRging SCale• 220lb capacity, heavy duty load cell for years of reliable service. • Large LCD control box

$164.00


9




THERMOMETERS AND AC SERVICE TOOLS AC LINE, MANIFOLD FITTINGS AND COUPLERS

FJ2128

a/C SyStem FlUSh SolVent• Removes moisture, acid and contaminants-100% enviromentally friendly Gallon size

$78.55

ML85530

3-in-1 Side moUnt Can tapUsed on R-12, R-134a & 2ozoil cans

$16.80

ML91046A

aC SyStem FlUSh kit• Includes flush gun, hose and

canister adapter, to clean contaminents from AC systems

$63.74

Item # Desc. MFG Price

FJ6005 A Hi Side 14 mm x 1.5 FJC $13.61

FJ6006 A Lo Side 14 mm x 1.5 FJC $13.61

FJ6025 B R12 to R134 Retro Kit FJC $29.34

ML82214 CEZ Snap Swivel High 14m-F x 16m

MSTCL $51.91

ML82224 C E-Z Snap Low Side 14m-F x 16m MSTCL $51.91

ML82834 DManual R134a Quick High -14m-F- x 16m

MSTCL $39.89

ML82834-E EManual Quick High 1/4 Flared Male x 16M

MSTCL $39.89

ML82934 DManual R134a Quick Low -14m-F- x 16m

MSTCL $39.89

ML82934-E EManual Quick Low 1/4 Flared Male x 16M

MSTCL $39.89

MLC282834-E-CL F High R12 hose to134A MSTCR $23.08

MLC282934-E-CL F Low R12 hose to134A MSTCR $23.08

MLC66234-CL G High side std 14m MSTCR $18.82

MLC66334-CL G Low side std14m MSTCR $18.82

RA18174 H Low Side Manual w/Safety Sleeve ROB $32.20

RA18175 H High Side Manual w/Safety Sleeve ROB $32.20

RA18190A I Low Side Blue w/Safety Sleeve ROB $51.14

RA18191A I High Side Red Safety ROB $51.14

RA18192 I Compact Quick Safety Set ROB $97.85

RA18341 J Automatic Type Set ROB $37.78

Manual couplers feature an internal safety mechanism which makes for a custom fit depression without damage to the valve.

FJ2680

ReplaCement aC ValVe CoRe and tool kit5 Different Valve Cores andTools for Standard and Large Valve Cores. • 37 Pieces 20 Part # 2672, 3 Part # 2673, 4 Part #

2674, 4 Part # 2676, 4 Part # 2677, 1 Part # 2744, 1 Part # 2745

$62.66

AR72921

CliCk loCk SeCURity FReon line CapS• Patented caps show if A/C system has been opened• Unique serial numbers allow easy Repair Order tracking• Allows you to check for potential refrigerant

cross-contamination$52.04

AR76050

mUlti-USe VehiCle line eaSy SpliCe kit• Quick, effective line repair with no line removal Installs in five minutes or less• No special tools or adhesives needed• For A/C, Transmission, Power Steering and Heater

lines. Burst tested to 2300 PSI. Fits in tight places• 8 times more sealing surface than standard

compression fittings. One each 5/16”, 3/8”, 1/2”, 5/8”, 3/4” Repair Kits

$196.42

A

R134 manual and automatic Quick Couplers

Item # Color Size MFG Price

ML84372 RYB Set 72” MSTL $73.05

ML84721 Blue 72” MSTL $23.82

ML84722 Yel/Shut 72” MSTL $31.12

ML84723 Red 72” MSTL $24.29

ML84725 Yellow 72” MSTL $25.60

ML84961 Blue 96” MSTL $29.16

ML84962 Yellow 96” MSTL $36.02

ML84963 Red 96” MSTL $29.16

FJ6448 RB/Coup 120’ FJC $108.64

RA60096 Set 96” ROB $143.24

RA64240 RB Set 240” ROB $103.79

FJ6072

tank and hoSe ConneCtion aSSoRtment• Popular connection fittings for R12 and R134• Connects hoses• Connections to Freon tanks, and more

$48.68ML82836

x-long R134a high Side adaptoR• High side extra long coupler for access to select

BMW / Volvo models$43.85

ML85525

ReFRigeRant ChaRging kit• Refrigerant U-Charge kit with top can tap and

low side coupler and charging hose

$19.67

ML91334-A

R12 / 134a ChaRging hoSe RepaiR kit• Contains gaskets, O rings and depressors to

repair R-12 and 134A hoses

$25.85

ML91339

hnbR o Ring kit 270 pCS• Assorted HNBR rubber rings generally used in AC

systems to gap the connection to create leak proof seals

$31.87B

C D

E F

G

J

H

I

10




AC SERVICE TOOLS AND KITS

AO7886

a/C CompReSSoR ClUtCh inStalleR/RemoVeR kit• Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors, Sanden compressors SD505, 507, 510, 575, 708 & 709

$39.03

ML70092

FlaRing Set, doUbleFlaRing and CUtting tool Set• Heavy duty tube cutter ML70033 (1/8” to 1 1/8” tubing);• Standard 45° flaring tool flares 7 sizes: 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” and 5/8” O.D. tubing• Five double flaring adapters cover 3/16”, 1/4”, 5/16”, 3/8” and 1/2” O.D.

$76.49

ML71100

iSo metRiC bUbble FlaRing tool Set• Flares without removing brake lines from the vehicle. • Includes hardened steel bar and carrying case. • Set includes: Adapters for 4.75mm, 6mm, 8mm and 10mm tubing

$92.86

• For 3/16”, 1/4”, 5/16” and 3/8” (4,6,and 8mm) O.D. tubing Open side design slips over tube. • Makes smooth short radius bends up to 90 degrees. Calibrated to show angle of bend

delUxe ClUtCh hUb pUlleR & inStalleR kit• Kit contains a complete offering of A/C compressor clutch hub pullers and installers for GM, Ford, Chrysler and imports Includes a compressor identification chart and comes in a custom molded caseML91000A $104.68

ML71475

• Fabricates push connect flare, 1/4”, 5/16” & 3/8”• GM fuel line flare 5/16” & 3/8”• 5 Double flaring adaptors for 3/16” - 1/2”• Metric bubble flare 4.75, 6, 8, & 10mm

$466.79

UniVeRSal hydRaUliC FlaRing tool Set

FJ2830

• Easily removes orifice tubes without damage.Use for standard and “T”-top orifice tube

$27.54

ML92311

delUxe oRiFiCe tool SeRViCe kit• 5 piece universal kit will remove and install any style orifice tube

$35.12

ML71480

37° FlaRing & doUble FlaRing hydRaUliC tool kit• This kit fabricates 37 Degree Push Connect Flare 3/16, 1/4, 5/16, 3/8, and 1/2”• Applications include Aviation, Motorcycle and Industry

$384.25

ML71550

baSiC a/C hoSe CRimpeR kit• Crips hoses fast & easy• Comes with four die sets for hose sizes (#6, #8, #10, & #12) and base for bench mounting

$229.47

ML71500

hydRa-kRimp delUxe a/C hoSe CRimpeR kit• Fabricate A/C hoses as easy as 1, 2, 3!• Hand held hydraulic press is portable• Dies snaps quickly into holding fixture• Comes with a complete set of dies for for sizes #6 , #8, #10, & #12 standard and reduced barrier hose

$868.07

ML70069-A

4 in one tUbing bendeR

$37.87

oRaFiCe tUbe RemoVeR and inStalleR kit

ML58490

UniVeRSal R12/R134a ValVe CoRe kit• Allows the user to remove or install the service port valve core without losing the systems charge. • Covers R12 and R134a systems. Includes five valve core arbors, high and low R134a couplers, ball valve assembly and 1/4”, 3/16”, 1/8” adapters for R12 systems.

$199.51

Use Ml71201-001A-REPK To Field Service Your Hydroflare Tool. Consists Of Assorted Parts.

SRRFT351

FlaRing tool kit• Just dial and activate your required operation

and the flaring is completed instantly sizes 3/16” to 3/8”. Reduce flaring labor by 20 minutes or more per job

• Creates 45° & single (mushroom and bubble) flares; 45° sizes - 3/16”, 1’4”, 5/16” & 3/8” and DIN - 3/16” (4.75 mm)

$365.25

OT6502

maSteR FlaRing tool kit6 Kits in One - Covers all the capabilities of the

following separate kits; • Single Flare Standard Lines 3/16” – 5/8”, 4mm

– 14mm• Double Flare Standard Lines 3/16” – 1/2”, 4mm

– 10mm• Bubble Flare Standard Lines 3/16” – 1/2”,

4.75mm – 10mm$126.58

ML71099-TC

gm tRanSmiSSion Cooling line die / adaptoR• GM transmission cooling line die and

adaptor set to be used in 71475 to prefrom production quality flares for Jiffy Style.

$43.85


11




AC SERVICE AND LEAK DETECTIONAC SERVICE TOOLS AND KITS

mUlti FReon leak deteCtoR

UniVeRSal FReon leak deteCtoR With UV light attaChment

CCLS790B

Detects all refrigerant and blends-R12, R22, R502, R123, R134a. 18” Flex probe, ten sensititvity levels. Visual and audible leak location and intensity indicators. Patented selective Water Vapor Filter allows operation in damp environments and checking evaporator leaks. Exceeds SAE J1627 moving probe specifications.

RA22791

inFRa-Red leak deteCtoR• Three sensitivity levels down to 0 15 oz./year.• Automatically recalibrates in highly contaminated areas to help pinpoint the exact location of the leak.• Senses CFC, HFC and HCFC blend refrigerants.• 8-hour lithium Ion battery lasts all day long• Visual alert and peak button make it easy to find leaks in noisy environments.

$523.32

Advanced Infrared Sensor Designed To Last A Minimum Of 10 Years.

OT4535

a/C ClUtCh hUb RemoVeR/inStalleR Set• For damage-free removal and installation of the clutch hubs on these air conditioning compressors: GM-Harrison DA-6, HR-5, V-5, A-6 and early R4; Nippondenso Ford/Chrysler A590, C171, FS-6, 6P148A (new style); Sanden & Sankyo; York/ Tecumseh HR980; Zexel/Mitsubishi CH series.

$102.75

Designed for confined spaces. Unique ratcheting action operates like a socket ratchet but cuts copper, aluminum, stainless steel, and PVC. Spring-loaded adjusting screw applies continuous pressure while cutting.

RatCheting tUbing CUtteRS

RA420711/8” to 1/2” tubing.

$37.78

RA420801/4” to 7/8” tubing.

$43.01

RA420901/4” to 1-1/8” tubing.

$56.68

ML55100-R-KIT

aC eleCtRoniC leak deteCtion ValUe bUndleBonus: Includes and R134a Brass Manifold with 60” Hoses, ManualCouplers, and a 3-in-1 Side Mount Can Tap Valve• Offers an accurate and reliable solution to Electronic Leak Detection.• 3 Levels Of Sensitivity (5 Levels Of Detection)• Visual Leak Level Indicator• Detects Leaks As Small As 1/10 oz Per Year• Detects All Refrigerants, CFC’S, HCFC’S, HFC’S• Includes a Custom Molded Carrying Case

Meets all US and International standards for utomotive use including SAE J2913 for HFO-1234yf,SAE J2791 for R-134a and European Standard EN14624:2005.• New E_MOS™ sensor technology incorporates a proprietary pulse modulation design to increase both battery and sensor life.

$269.13

CG312KIT

UndeR pReSSURe ValVe CoRe RemoVal kitRemove the valve core without loss of vacuum. • The VCR kit allows for servicing both high side & low side ports • Extractor shaft assemblies allow service of all valve cores in all R-134a and R12 systems

$87.89

$179.82

Patented selective Water Vapor Filter allows operation in damp environments and checking evaporator leaksRA16600

R12 R134 eleCtRoniC FReon leak deteCtoR• For all CFC, HCFC, and HFC refrigerants. • Uses corona discharge technology. • Audible and visual leak indications.

$224.83

Make instant repairs to A/C lines on hun-dreds of vehicles with this easy-to-use kit. • Repair damaged rubber and aluminum lines including pinholes, cracks, kinks, and more• On-the-car repairs made simple• Make connections easily by hand; no specialty tools required• Covers most common line sizes• Both kits contain hose, compression unions and line adapters designed specifically for A/C repair applications• Conforms to SAE J2064 specifications for low permeability• Pressure rated up to 600 PSI

SRRAC1347 47 Piece Kit $437.87

SR-RAC138780

87 Piece Bonus Kit $599.00

SRRAC128

a/C line RepaiR/in line FilteR kitRepair a damaged A/C line or install an in-line filter in as little as 5 minutes with this unique,dual-purpose repair kit.• REPAIR CARS, TRUCKS & SUVÜS - Works on hundreds of domestic and foreign vehicles• REDUCE LABOR - Avoid difficult work removing and installing lines

$70.73

The fast and affordable solution for repairing damaged A/C line including pinholes, cracks, and corrosion. Make both aluminum to aluminum and aluminum-to-rubber repairs.• Kits include compression union, rubber hose adapter, clamp holder, and clamps (hose sold separately)• Available in 3/8”, 1/2”, 5/8”, and 3/4” sizes

SRRAC638 3/8” $27.22

SRRAC812 1/2” $26.42

SRRAC1058 5/8” $26.42

SRRAC40 3/8”, 1/2”, 5/8”, & 3/4” $109.83

CCLDA1000UV $192.31

FRee!

MLC55100-CL

eleCtRoniC ReFRigeRant leak deteCtoR• Electronic refrigerant leak detector detects all

refrigerants as low as .1oz per year. • Digital microprocessor controlled, color LCD

indicators packaged in custom molded case$164.00

12




KNIVES AND SHARPENING TOOLS

Bayonet Out the Front

Item # Pic OAL Handle Blade Price

SWBLOP3R A 7.7” 4.3” 3.4” $54.79

SWEE2BS B 7.7” 4.4” 3.3” $59.78

SWCK109 C 7.4” 4.4” 3.0” $18.12

SW911N D 8.2” 4.8 3.4 $74.73

SWCK111S E 7.3” 4.2” 3.1” $20.71

SWFR F 8.0” 4.7” 3.3” $24.79

SWMP4LBS G 8.6” 5.0” 3.6” $59.78

SWCK114L H 11” 6” 4.9 $31.12

SW32C I 8” 5” 3” $22.11

SW3600C J 8.1” 4.75” 3” $19.52

SW3600CS K 8.1” 4.75” 3”S $19.52

SW3700 L 8” 4.7” 3” $19.52

SW3700S M 8” 4.7” 3”S $19.52

SWBLOP3R N 7.7” 4.3” 3.4” $54.79

SWBLOP3RS O 7.7” 4.3” 3.4”S $54.79

SWBLOP3TBL P 7.7” 4.3” 3.4” $54.79

SWBLOP3TBLS Q 7.7” 4.3” 3.4”S $54.79

SWATL R 8.5 4.8 3.7 $54.53

SWOTF2DB S 7.7 4.7 3 $54.79

SWSWFRS T 7.7 4 3.3 $24.79

SWMP6S U 7.7 4.3 3.4 $59.78

Item # Description Price

Ken Onion Chives feature SpeedSafe easy opening, and a safety blade lock. Blade Length, 1-15/16”, closed 2-7/8”

KR1600 Silver $57.66

KR1600BLK Black $90.62

KR1600PINK Pink $56.00

KR1600SS Stainless $70.02

KR1600VIB Rainbow $90.62

Kershaw Leaks feature speed-safe assisted Open thumb-stud folder with index finger lever and safety lock. Blade length 3”, handle length: 4”, overall length: 7”

KR1660 Silver $61.78

KR1660BB Black/Blue $61.78

KR1660BR Black/Red $70.00

KR1660CB Composite $98.86

KR1660OCC OCC $84.02

KR1660PINK Pink $65.89

KR1660ST Serrated $61.78

KR1660TROUT Trout $70.00

KR1660VIB Rainbow $107.10


SWSCHSA Dual $49.80

SWSCHSAD Single $49.80

Chives/leaks

H

Black Ops MAGIC 3rd Generation

Extraction & Evasion Assisted Open

24-7 Folder Drop Point

First Response Rescue Knife

Extreme Ops Folder Serrated Drop Point Blade

First Response Drop Point Rescue

M&P MAGIC2nd Generation Assisted Opening

poWeR glide Single edge• PowerGlide brings back the

design of the “Paratrooper” knife with updated materials & technology. Simply split the handles and draw them apart for the blade to appear.

• Features Zytel alloy for lighter weight • Blade shape has a modern utility design.• Comes with a cell-phone style carrying clip-

holster, allowing the knife to be worn securely while hanging from equipment.

• Length, Open: 9.325”, Length, Closed: 5.625”, Blade Length: 3.875”

$24.79

Liner Locking Dagger Knife

Karambit Framelock

Tanto Tiger Camo Tactical

Tanto Tiger Camo Tactical Serrated

Drop Point Special Tactical

Drop Point Special Tactical Serrated

Black Ops 3 MAGIC Assist Smoke Red

Black Ops 3 MAGIC Assist Smoke Red Serrated

Tanto Black Ops 3 MAGIC Assist Smoke Blue

Tanto Black Ops 3 MAGIC Assist Smoke Blue Serrated

I

J

K

L

M

N

O

P

Q

R

S

T

U

A

B

C

D

E

F

G

SWPGBT

Viper Side opening knives

Features a safety locked blade that easily releases through the side.• Blade 3.2”• Handle 4.5”

Guarantees a perfectedge on all types of blades• Features 70, 120, 600, and 1000 grit stones and

honing oil

dURa edge ShaRpening SyStem

VMSSGHI

all pURpoSe Utility kniFe blade With magnetiC StoRage• Stainless Steel Blade With 2

Component Handle & Thumb Stop

• Magnetic Base Keeps Knife Close At Hand

$26.35ISSCKIT1 $49.82

Swat Tactical

First Response Rescue

Magic Super Serrated


13




KNIFE SHARPENERS, POCKET AND UTILITY KNIVES

Item # Blade” OAL” Price

KR1257 7 12 $16.83

KR1259 9.25 14.25 $17.70

KR1280 10 15.5 $26.58

KR1287 7.5 12.75 $23.03

KR1445 2.5 6.12 $20.38

KR1446 2.75 6.62 $22.15

KR1447 3.5 8.12 $31.03

KR1550 3.25 7.75 $82.37

KR1560 3.25 7.75 $74.13

KR1560ST 3.25 7.75 $74.13

KR1605 3 7.25 $39.91

KR1605CKTST 3 7.25 $39.91

KR1620 2.25 5.75 $57.66

KR1620BL 2.25 5.75 $61.78

KR1620C 2.25 5.75 $65.89

KR1620FL 2.25 5.75 $60.13

KR1620GRN 2.25 5.75 $61.78

KR1620RD 2.25 5.75 $61.78

KR1620ST 2.25 5.75 $57.66

KR1620VIB 2.25 5.75 $98.86

KR1620YL 2.25 5.75 $57.66

KR1670BLK 3.37 7.87 $90.62

KR1670DS-BLK 3.37 7.87 $90.62

KR1670GB-BLKST 3.37 7.87 $98.86

KR1670OL-BLK 3.37 7.87 $90.62

KR1730SS 3 6.87 $44.33

KR1760 3.12 7.37 $61.78

KR1820 3 7.12 $61.78

KR1830 3 7.37 $35.46

KR1835T-BLKST 3.12 7.25 $35.46

KR1840 3.5 7.87 $74.13

KR1860 3.5 8.5 $90.62

KR1870 3.25 7.87 $90.62

KR1880 3.25 7.25 $82.37

KR1920 3.37 7.62 $32.92

KR1950 3.75 9 $44.33

KR1960 2.75 6.87 $35.46

KR1970 3 7.12 $35.46

KR1980ST 3.12 7.12 $35.46

KR1990 3.25 7.37 $35.46

KR3650 3.12 7 $39.91

KR3700 2.5 6 $31.03

KR8000OL 3 7.25 $53.21

K8100GRYST 3 7.25 $53.21

KR8200GRY 3 7.25 $53.21

KR8200RD 3 7.25 $53.21

KR8200RD Funxion DIYKR8100GRYST Funxion

KR1870 Knockout

KR1950 Tremor

KR1980ST RJII Serrated

KR8000OL Funxion Olive

KR1990 Brawler

KR1835TBLKST Kuro

KR1446 3/4 Ton

KR1257 Fillet

KR1259 Fillet

KR1280 Curved Breaking

KR1287 Narrow FilletKR1445 Half Ton

KR1447 One Ton

KR1550 Blackout

KR1560 Whirlwind

KR1560ST Whirlwind Ser

KR1605 Clash

KR1605CKTST Clash Ser

KR1620 Scallion

KR1620BL Scallion Blue

KR1620C Scallion Camo

KR1620FL Scallion Frame Lock

KR1620GRN Scallion Green

KR1620RD Scallion Red

KR1620ST Scallion Serrated

KR1620VIB Scallion Rainbow

KR1620YL Scallion Yellow

KR1670BLK Blur Black

KR1670DSBLK Blur Dessert

KR1670GBBLKST Blur Glass Breaker

KR1670OLBLK Blur Olive

KR1730SS Zing

KR1760 Skyline

AP334CD

2 Step kniFe ShaRpeneR2 Step Knife Sharpener • Features pre angled

coarse and fine ceramic rods that maintain an accurate edge.

$4.97

knife and tool SharpenersOnly 10 seconds to sharpen all types of knives, cleavers, axes, machetes, and many other cutting tools.

AP001C Knife Sharpener $12.28

AP002C Shear Sharpener $9.92

AP005C Camo Knife Sharpener $17.02

KR1830 Oso Sweet

KR1860 Piston

KR1820 Needs Work KR1840 Shallot

KR1880 Echelon

KR1920 Select Fire

KR1960 Drone

Burst

KR3650 Volt II

KR3700 Kurai Carbon

KR8100GRYST Funxion

KR8200GRY Funxion DIY

KR1970 Burst

14




RADIATOR SERVICE

The Most Economical Unit toEvacuate, Test and Refill Engine Cooling Systems• Connects easily to most engine cooling

systems-simply connect to radiator filler neck or reservoir tank.

• No need to cut header hoses or disconnect radiator hoses

• Accurately pre-mixes water and anti-freeze in convenient 3 gallon (11.3L) holding reservoir

FJ43645

maSteR RadiatoR adaptoR and Cap pReSSURe teSt kitFor Use in Testing Radiators and Radiator Caps• Confirms Radiator and Cooling Systems

Leaks• Test Radiator Caps for Proper Operation• Includes Adapters for Late Model GM & Ford• Use for most brands on car manufacturers

$304.54

EZS102

eZ Red antiFReeZehydRometeR• Range From +32(F) To-60(F)

$10.77

TA13840

gReat big hookeR JR• 11” overall length with 6” exposed shaft.

$13.03

TA19750

hoSe Clamp plieRS Set• Jaws rotate to access at any angle• Ratcheting locking mechanism.

$24.44

MYMV4506

UniVeRSal RadiatoR adaptoR• Universal design fits most automotive radiators and expansion tanks• Inlet fits standard adapter available on all brands of pressure testers

$57.69

OT4525

Cable hoSe Clamp plieRS• Allows technician to access the flat-type hose clamps located in hard-toreach areas. • Pliers has locking mechanism to hold clamp in the open position, • Heavy-duty 24” cable flexes to almost any position. Pliers is spring loaded to the open

$57.05

MH45650

CatS paW hoSe Clamp plieR• Solid, One Piece Construction!• Handles Standard & Space Saver Clamps up to 2- 3/32”• Locking Device For Control & Comfort!

$79.95

KD3791 3/4” $16.78

KD3792 1-1/4” $29.18

KD3793 2-1/2” $46.77

Universal Design Fits Most Automotive Radiators and Expansion Tanks

handles Standard & Space Saver Clamps up to 2- 3/32”

Soft hose pinching pliers

LT998

oVeR the hoSe Clamp RemoVeRHose clamp pliers reaches around the hose to

encapsulate clamp compressing tips. • Tool allows the mechanic to easily rotate the

clamp to a position where it can be easily accessed for removal using this tool.

$21.49

FJ43650

RadiatoR pReSSURe teSt kitDesigned to fit most domestic & foreign

major car brands. Includes pressure testing pump with gauge and hose, thermometer adaptors for testing.

• Use for: Chrysler, Ford, GM, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Lexus, Honda, Audi, BMW, Mercedes Benz, Jeep, SAAB, Volvo, and VW

• May also work on other brands not listed.$197.40

Used to pinch rubber hoses to stop flow of

SK7601 0.75 $18.91

SK7602 1.25 $27.77

SK7603 2.5” $51.18

Solid Steel Hose Pinching PliersPliers Have Comfort Grip Rubber Handles and are Self Locking for Secure Clamp Offs

TA14300

mighty CUtteRMakes accurate, straight cuts with clean edges

on rubber or plastic hose, PVC pipe and certain types of wire and wire cable

• Handles up to 1 1/8” O.D. material• For automotive, autobody, marine and aviation shop.

$23.14

KD82060

2 pC loCking hoSe Clamp plieR Set• Innovative waffle iron design securely grabs and locks the wire hose clamp

in place• 2 pc set includes 7” and 9” pliers• Chrome plated for a lifetime of corrosion

resistance• Ideal for cooling systems, hydraulic work, and

brake lines• Drop forged head provides extra strength and durability

$59.38

KD82115

hoSe Clamp Cable plieRS• Dual sided clamp allows for a range of 0-2” and 1-3”• Lock mechanism keeps hose

clamps steady during work• Great for cooling systems,

hydraulic work, and brake lines

$71.38

MH60008

RadiatoR hook and piCk Set• 90 Degree Hook, C-Hook, 45 Degree Hook, Cotter Pin Puller • 10” Overall Length Heat Treated and Tempered

Steel with Dominator handle

$54.99

AO9409A

Cable hoSe Clamp plieRS• Allows for removal of plastic and/or metal self- tightening hose clamps with diameters of 11/16” - 2-1/2” (18mm - 54mm)

$56.66

UV570000

VaCUFill RadiatoR SeRViCe CenteR

$1,369.85


15




RADIATOR SERVICE

TX106

antiFReeZe teSteR• Large Professional Size 16 1/4

$18.26

SN12270

RadiatoR pReSSURe teSteR kit• Operates to 30 psi for new high pressure cooling systems in Audi, BMW, Mercedes, Volkswagen, and other late model cars

$106.56

UV550500

aiR liFt ii RadiatoR ReFill tool• Allows technician to quickly refill the cooling system and eliminate air locks that cause overheating, Connects to shop air supply• Made of composite plastic

$121.64

AHFZ128 A Nissan, Eagle, Mazda Cooling System Adaptor $51.93

AHFZ138 B Dodge, Toyota, Mitsubishi Cooling System Adaptor $51.93

AHFZ148 C 2000 Toyota Tundra, Celica GT-S, MR2 Spider. $40.00

AHFZ22 D VW, Audi cooling sys adaptor $35.01

AHFZ25 E Volvo, Jeep, Saab, Sterling Adapt $35.01

AHFZ29 F Small Asian Cap Tester $13.93

AHFZ35A G GM & Ford 94 up sprt/SUV $49.91

AHFZ41 H 1996-2008 Audi A4; 1993-2008 Audi A6, VW Passat, and new Beetle; 1999 VW Golf and Jetta

$49.91

AHFZ47 I Applicable 2004 and newer Mazda 3, and Vovo S40 series. $49.80

AHFZ55 J Tank Adapter for Dodge Sprinter VanApplicable to 2007-2008 Dodge Sprinter Van

$48.79

AHFZ1002 K European Set. Includes AHFZ 22, AHFZ 25, AHBMW350, AHFZ41, AHFZBMW345, AHFZM0349

$259.31

C

E

G

H I

L

UV550000

aiR liFt SyStem• Allows technician to quickly refill the cooling system and eliminate air locks that cause overheating, Connects to shop air supply• Brass manifold

$176.92

K

D

AO78585

UniVeRSal RadiatoR pReSSURe teSteR & VaCUUm type Colling SyStem kit• Unit is suitable for domestic and import vehicles• Color coded radiator test caps make it easy to choose the suitable test cap for the job• Special design of vacuum purge & refill tool connection fits nearly all type of radiator opening• 17pcs, uncluding universal adaptor and Test Caps for testing cooling systems on most domestic and import vehicles

$382.28

A B

UV560000

gaS and dieSel CombUStion leak teSting kit• Confirms if the engine head is cracked by diagnosing radiator gases• Dual Chamber filters out alkaline particles that may causea false positive• Universal test solution for gas and diesel stock just one chemical• C/W 16 ounce test fluid good for 16 applications.

$80.02

FJ43610

Coolant VaCUUm kitUses Shop Air to Evacuate & Leak Test an Auto’s

Cooling System• Use to Refill Coolant in Minutes

$104.66

LS24680

expanded Spill FRee FUnnel kitEliminates trapped air pockets which can cause

erratic cooling system and heater performance.• Now access radiator caps located under

engine shrouds or in fender wells with new included adaptors.

$37.80

LS60450

RadiatoR petCoCk WRenCh Set• Includes long and short wrenches to fit many

applications. Works on most import and domestic vehicles.

$17.01

Item # Size Price

ML90934 2 OZ $8.77

ML90935 6.5OZ $21.87

Aluminum filled epoxy putty for strong long lasting repairs to all aluminum components. • Easily repair any radiator, condenser, evaporator, A/C line, or aluminum based product

aluminum bonding epoxy

RA75240

Coolant/batteRy ReFRaCtometeRMeasuring the freezing point of either propylene

or ethylene glycol based cooling systems. • Also checks the strength of electrolyte solution

batteries• High-quality optics with ultra smooth focusing. • Scale range: 32° F to -60° F

$76.70

16


The Nation’s Automotive Toolbox®


SPARK PLUG REPAIR AND ENGINE SERVICE

5.4 Spark Plug RepairThread Repairand Replacement

HC4833

OXYGEN SENSOR THREAD REPAIR KIT• Piloted reamer – no drilling necessary to assure

perfect alignment of the new tapped hole$133.50

ET38900

FORD SPARK PluG INSTAllER KIT• Used to repair damaged heads from blown

spark plugs with an alloy steel insert.• Saves time, increases profit for the shop.

Repair time could be as low as 20 minutes$358.97

LS65600

5.4l BROKEN PluG REMOVER• This tool set removes the broken spark

plug from 2004 and up Triton 3 valve per cylinder engines,

$92.21

ET39200

5.4 SPARK PluG PORCElIN EXTRACTOR• The New Ford Spark Plug Porcelain extractor

works to remove broke porcelain from Ford 5.4L engines Allows user to adhere extractor to porcelain and remove from the frozen stainless steel sleeve

$22.22

ET391

FORD SPARK PluG REMOVAl KIT• This tool kit is needed for the removal of

sparks plugs that break off in the cylinder head during removal on 5.4L Ford engines

$66.18

HC5621

Inch Coarse Master Set to repair 1/4-20” x .375 Length, Thread Size 5/16-18” x .469 Length, Thread Size 3/8-16” x .562 Length, Thread Size 7/16-14” x .656 Length, Thread Size 1/2-13” x .750 Length and Instalation Tools (one Per Size), and 4 Drill Bits (One Per Size).

$186.95

HC5625

Inch Fine Master Set to repair 10-32 x .285 Length, Thread Size 1/4-28” x .375 Length, Thread Size 5/16-24” x .469 Length, Thread Size 3/8-24” x .562 Length, Thread Size 7/16-20” x .656 Length, Thread Size 1/2-20” x .750 Length, and Instalation Tools (one Per Size), and Instalation Tools (one Per Size), and 4 Drill Bits (One Per Size).

$271.06

HC5626-125

Metric Fine Master Set to repair: M5x0.8 x 7.5mm Length, M6x1 x 9.0mm Length, M8x1.25 x 12.0mm Length, M10x1.25 x 15.0mm Length, and Instalation Tools (one Per Size), and 4 Drill Bits (One Per Size).

$171.43

HC5626-150

Metric Coarse to repair M5x0.8 x 7.5mm Length, M6x1 x 9.0mm Length, M8x1.25 x 12.0mm Length, M10x1.5 x 15.0mm Length, and 4 Taps (One Per Size), and Instalation Tools (one Per Size), and 4 Drill Bits (One Per Size).

$158.93

Item # Size Thread Price

HC5521-1 12.-24 Coarse $33.65

HC5521-10 5/8”-11 Coarse $56.97

HC5521-12 3/4”-10 Coarse $72.46

HC5521-14 7/8”-9 Coarse $157.87

HC5521-16 1”-8 Coarse $182.65

HC5521-2 8”-32 Coarse $33.65

HC5521-3 10”-24 Coarse $31.58

HC5521-4 1/4”-20 Coarse $24.66

HC5521-5 5/16”-18 Coarse $24.66

HC5521-6 3/8”-16 Coarse $24.66

HC5521-7 7/16”-14 Coarse $26.57

HC5521-8 1/2”-13 Coarse $32.29

HC5521-9 9/16”-12 Coarse $56.97

HC5523-12 12 x 1.25 Spark $116.43

HC5523-14 14 x 1.25 Spark $141.78

HC5523-18 18 x 1.5 Spark $155.16

HC5528-10 5/8”-18 Fine $64.70

HC5528-12 3/4”-16 Fine $80.26

HC5528-3 10”-32 Fine $38.92

HC5528-4 1/4”-28 Fine $38.92

HC5528-5 5/16”-24 Fine $38.92

HC5528-6 3/8”-24 Fine $38.92

HC5528-7 7/16”-20 Fine $38.92

HC5528-8 1/2”-20 Fine $43.23

HC5528-9 9/16”-18 Fine $64.70

HC5542-10 10MM -1 Fine $64.70

HC5543-10 10MM -1.25 Fine $52.31

HC5543-11 11MM -1.25 Fine $57.82

HC5543-12 12MM -1.25 Fine $61.74

HC5544-12 12MM-1.5 Fine $72.95

HC5544-14 14MM-1.5 Fine $82.79

HC5546-16 16mm-2 Fine $82.79

HC5546-10 10MM-1.5 Coarse $39.74

HC5546-11 11MMX1.5 Coarse $46.04

HC5546-12 12MM-1.75 Coarse $49.14

HC5546-14 14MM-2 Coarse $75.05

HC5546-18 18MM-2.5 Coarse $87.10

HC5546-3 3MM-0.5 Coarse $73.27

HC5546-4 4MM-0.7 Coarse $42.68

HC5546-5 5MM-0.8 Coarse $35.67

HC5546-6 6MM - 1 Coarse $34.51

HC5546-7 7MM-1 Coarse $40.07

HC5546-8 8MM-1.25 Coarse $32.42

HC5546-9 9MM-1.25 Coarse $39.74LS65000

DEEP HOlE AluMINuM HEAD M14X1.25 SPARK PluG HOlE REPAIR KIT• Replaces stripped spark plug threads on

aluminum heads with 14mm spark plugs. Installs a new spark plug thread insert in original thread location.

$110.65

With Heli-Coil threads, tapped holes are strengthened and thread life is dramatically increased even after repeated assembly and disassembly.

HC1130

HEAD BOlT REPAIR KITTypically used in Cadillac, Honda, Toyota & other

import vehicles• Use on sizes 11mm x 1.5mm• Kit includes:- High speed drill bit, High speed

steel tap, Installation tool, 12 stainless steel inserts.

$297.85

HC1130

HC4833

CV39300

Designed to aid in the repair of a common problem in the Ford Triton family of motors.• This kit will speed repair of damaged threads

or blowouts in 30 minutes or less per cylinder. • Needed for 3-valve 5.4 L and 6.8 L engines

built before October and November 2007 and 3-valve 4.6 L engines built beforefound in 2004–2008 Ford, Lincoln and Mercury.

$274.73

FORD TRITON 3-VAlVE INSERT INSTAllER KIT

17




TRANSMISSION, AND FUEL LINE SERVICE

TA34580

TRANSMISSION ANDENGINE OIl PRESSuRE TESTER KIT• Check oil pressure in automatic transmissions

and engines.• Adapters provide coverage of most domestic

and imported cars and light trucks including late models. Includes 6’ of oil proof hose and 10 assorted fittings.

$101.43

LT940

GAS TANK FuEl PuMP REMOVAl TOOl• Removes plastic fuel pump

retaining rings.• Versital adjustable design fits

most plastic retaining rings.$24.68

OT6763

FORD 6.0l FuEl HIGH PRESSuRE TEST ADAPTER SET• High Pressure Fuel Rail Adapters are required to

connect to the vehicle’s fuel lines on different style 6.0 Ford systems since there was a change in 2004

$42.55

OT6766

FORD 6.0l INJECTOR HARNESS CONNECTOR RElEASE TOOl• Required for removal of the vehicle’s injector

wiring harness without causing damage to the component.

$42.55

LS12230 A Oxygen Sensor Thread Chaser, Size: M18x1.5 $5.65

LS20020 B Limited Access Spark Plug Chaser, Size: M14x1.25, 3/8” Drive $6.59

LS22710 C Disconnect Set For Jiffy-Tite, 22720 3/8” Jiffy-tite Disconnect, 22730 1/2”, 22740 5/8” 39%, 22750 5/8” 30%

$75.90

LS22930 D 3/8” Low Profile Jiffy Tite Disconnect $18.90

LS37500 E GM Fuel Module Disconnect, 98 and later full size pickups $6.59

LS37000 F AC/Fuel Line Disconnect Tool $9.10

LS39400 G 6 Piece Angled Disconnect Tool Set, Six sizes: 5/16” ,3/8”, 1/2”, 5/8”, 3/4” and 7/8”

$17.34

LS39660 H Transmission Oil Cooler Line Scissors 3/8” x 1/2” $11.32

LS39890 I 3 Piece Angled Fuel Disconnect Set, 3/8”, 5/16”, 5/8” $7.54

LS39900 J Master Line Disconnect Set $56.25

LS39210 K Main Fuel Line Disconnect For Nissan and Toyota $18.90

C

EG

D F

ABK

I

SL69800

VOlVO FuEl PuMP SOCKET• Designed to remove the left

and right fuel pump retaining nuts on all late model Volvos.

• This tool also gives easy access to the XC90’s left tank unit retaining nut without removing the large frame under the seat bottom

$48.31

TA53770

QuICK COuPlER FuEl INJECTION TESTER• Can easily be expanded to

provide additional coverage using Tool Aid’s quick coupler adapters to create a custom kit.

• Includes Cat. No. 53908, Large Schrader Valve Test Adapter for GM and Chrysler.

• 2-1/2 In diameter gage with dual scale and hang-up hook measures 100 PDI and 7 BAR.

$59.85

LS68210

IPR FORD DIESEl SOCKT• Used to remove and replace the Injector Pressure Regulator

(IPR) on. Ford 6.0L and other diesel engines.

$29.30

J

H

ET230TNZ

QuICK CONNECT FuEl lINE DISCONNECT SET• Low profile design also allows the user to pry off

trouble connectors. • Opening is 3/4” and tapers down to 1/8” for

multi size use$22.49

ET244TNZ

HEATER HOSE DISCONNECT SET• 40 degree offset to help work around

obstructions. Sizes5/8” to 1”.$31.82

LS63000

COMPACT FuEl lOCK RING TOOl• Remove and Install Plastic Fuel Tank Lock Rings

from 4” to 7-1/4” Without Damage.• Works on the new smaller GM serrated rings and

traditional rings.$42.53

LS39160

FuEl lINE RETAINING ClIP TOOl SETCompact Tool Design Fits Tight Spaces.• Two sizes, 3/8’’ and 5/16’’ are designed to

release the nylon retaining clip used on the fuel lines of newer GM and Chrysler vehicles with electric fuel pumps.

$9.43

OT5613

VACuuM PRESSuRE GAGE KIT• Quickly diagnose internal engine problems

such as bad rings, valves and leaking head gaskets.

• Dual scale gauge reads 0-30 in. Hg vac and 0-70 cm Hg, also reads 0-15 psi and 0-100 kPa.

$41.49

SRRTR555

DEluXE TRANSMISSION OIl COOlER lINE REPAIR KITReplace or repair

transmission oil cooler lines for virtually any vehicle within minutes!

• Make repairs on both 5/16” & 3/8” lines

• Perfect for damaged lines including rust, cracks, pinholes, and more

$285.88

CMA311

12” lONG FEElER GAuGE SET• For long reach applications, especially diesel.

12” blades • .0015. to .040”. Metric markings included. Blades are removable.

$20.54

CM2380

10” lONG 5/8” SPARK PluG SOCKET• Extra-long socket with thin wall combines for

great accessibility. • Ideal for use on Toyota hemi-style plugs, plus

marine, small engine and specialty motors.$25.96

18




FUEL INJECTION AND ENGINE SPECIALTY TOOLS

SRRKP1200

FuEl lINE REPAIR AND REPlACEMENT KIT• This fuel line repair kit will save time and

labor, while increasing profits. Save up to 75% off installation time. Convenient push button thumb release makes connections quick and easy. Nylon lines are flexible. No more difficulty handling rigid steel lines.

$223.08

DEluXE FuEl PRESSuRE TESTER ADAPTER KIT

MTV400-0050

DETERGENT CONCENTRATED FuEl ClEANER• Exclusive Hydrobond Technology

uses proprietary chemistry to “steam clean” combustion chamber deposits.

$18.01

SRRFPT22

FuEl INJECTION PRESSuRE TEST KIT• Accurately diagnose fuel delivery problems with this advanced tester including faulty fuel pumps, pressure regulators, fuel lines, check valves, and fuel filters.

$330.94

TA58000

QuICK COuPlER MASTER FuEl INJECTION PRESSuRE TEST KIT• 4 foot hose provides more mobility• Bleed off valve with 6’ of translucent hose safely

depressurizes system after completion of testing.• Includes two gages with dual ranges: 1-100 PSI

(0-7 BAR) and 0-50 PSI (0-3.5 BAR).• Bleed off valve with 6’ of translucent hose safely

depressurizes system after completion of testing.

$376.87

TA53980

QuICK COuPlERDESIGN FuEl TESTER• Includes 2 Gages• Tests Ford, GM and Chrysler vehicles with multi-port and some TBI• In plastic storage case

$138.42

TA53950

FuEl INJECTIONPRESSuRE TESTER• 2 Gages and Quick Coupler• Tests ford , gm , Chrysler and ford vehicles with

multi-port and some tbi.$127.92

TA56250

MulTI-PORT FuEl INJECTION PRESSuRE TESTER SYSTEM• For domestic and foreign vehicles• In storage case with quick couplers.

$191.36

TA36330

IGNITION SPARK TESTER KIT• Quickly diagnose electrical fuel injection, IAC

and spark plug circuits$53.85

TA23900

IN-lINE IGNITIONSPARK CHECKER• Visually check condition of each cylinder

$7.13

TA23970

IN-lINE SPARK CHECKER KIT FOR RECESSED PluGS• A must for testing newer vehicles with recessed

spark plugs• Troubleshoots virtually all domestic and import

cars, SUV’s & trucks• Provides information not available with OBD II

code reading devices• Shows a duplicate view of the ignition spark

$20.59

Quickly diagnose “no start” and engine misses conditions in the electrical fuel injection and spark plug circuits.

TA36350

IN-lINE RECESSED SPARK CHECKER IAC AND NOID lIGHT KIT• Use to test spark plug circuits, electronic fuel

injection signals and idle air control circuits. Includes the recessed in line spart testing apparatus:

• 8 Noid Lights for checking GM PFI, Ford TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI, BOSCH 2 and GM MULTEC 2

• 2 IAC Test Lights for straight and 90° applications$71.19

TA34000

uNIVERSAl COMPRESSION TESTER FOR GASOlINE ENGINESAdapters fit 14 & 18mm plugs. Gage

range 0-300 psi & 0-21 bar.$64.57 TA33600

EXHAuST BACK PRESSuRE TESTER• Threads into the Oxygen Sensor Port.• Kit includes 41” hose and 12MM and 18MM

adapters to fit most domestic and imported vehicles.

$54.24SRRFIC903

INTAKE SYSTEM ClEANER CANISTERCleans gum, varnish, and carbon deposits where fuel flows through• Helps increase gas mileage

performance• Easy to use — simply fill with

Air Intake Cleaning solution and connect into vacuum line

$112.13

SRRFPT290

Universal adapter set connects fuel pressure testers and injection cleaner canisters to virtually any vehicle.• 21-piece kit fits over 90% of domestic and

foreign vehicles

$244.18

IV5612

DIGITAl COMPRESSION TESTERThis versatile Digital Compression

Tester accurately graphs and measures BAR, PSI, kPa, Digital Pressure and more on a large and easy to read LCD display

• Pro quality features helps graph and analyze compression readings and variance

$350.84

19




FUEL INEJECTION, SPECIALTY CAM ALIGNMENT AND ENGINE TOOLS

LGTU-32-6

DuRAMAX GM 6.6l DIESEl FuEl SYSTEM TEST KIT• For diesel fuel pressure and vacuum testing

on GM 6.6L Duramax engines • Gauge assembly with 6-ft. hose and quick

coupler $217.99

$294.48AH6800TDI

TIMING BElT TOOl SET FOR VW T.D.I.Used for setting & adjusting the cam/crank/pump timing on 1999–2008 VW TDI engines. • Kit contains the #3359 TDI, Lock Pin, #3428

New Style TDI Cam Lock Bar, #H 2587-1 & #H 2587-2 Timing Belt Tensioner Spanner Wrenches, #T 10115 Tensioner Lock Pins, #T 10050 Crankshaft Stop & the #T 10100 Oval Pulley Crankshaft Stop.

TA34900

DIESEl ENGINE COMPRESSION TESTER SET• Consists of five of the most popular diesel

adapters for Audi, small Cummins, Ford/International, GM, Mercedes Benz, Volkswagen and Volvo.

$171.84

WA76462

uNIVERSAl ElECTRONIC QuICK PROBE• Probe is specifically designed to detect the

vibrations emitted when the injector fires.• Adjustable sensitivity using the thumb-wheel• Bright LED strobe will flash each time the injector

opens and closes$140.99

WA76562

COP QuICK PROBE KV TESTERThe fastest way to verify the firing of a Coil Over

Plug ignition coil and spark plug.• Eliminates the need for back -probing coil wires • Variable sensitivity (VS) for greater diagnostic

accuracy Super Bright LED kV Strobe and Green LED Arc Indicator

$143.76

AHMC1400

MINI COOPER ENGINE AlIGHNMENT TOOl SET• Makes an impossible job possible by using

the right tools • Used on the N14 Turbocharged engines,

most cars 2009 and newer

$300.68

AHT40070

V6 VW AuDI CAM HOlDING TOOl 3.2l2 Cam Lock Clamps Used for lockingcamshafts when setting valve timing. • Audi: 3.2L V6 4v (BKH), 4.2L V8 4v (BAR, BNS,

BVJ, BYH and CAUA) and 5.2L V10 4v (BXA and BSM)

• VW: 2.5L I5 (BGP, BGQ, BPR, BPS, CBTA and CBUA)

• Order T40069 locking pins to aid in this repair

$212.84

AHBMW6208

BMW ENGINE TIMING TOOl SETUsed to Set Timing on Cams of Both Cylinder

Heads • Includes Hold Down Tool for Cam Fixtures • Crankshaft Timing Pin Included • Applicable to: N62 and N73 Engines

$301.93

MY5530

PROFESSIONAl COMPRESSION TESTER KIT

$94.51

• Full coverage kit, automotive, industrial, marine, and small engines.cylingers and valve train damage.

• 6.5” 14mm short thread hose, 12” 14mm short thread hose, 12” 14mm long thread hose, 12” 18mm short thread hose.

• 14mm female, and 18mm long reach adapters.• Small engine/Motorcycle adapters - 10mm &

12mm. Air hold quick connector adapter

TA35450

6.7l FORD DIESEl TESTING ADAPTOR• Uses the glow plug hole as the testing port• 8mm-1.00 thread, 6” long hose

$26.13

Specialty Diesel Test Kits

LGTU-32-3

INTERNATIONAl DIESEl FuEl SYSTEM TEST KITUsed to perform pressure and restriction

testing of fuel systems on International engines VT365, T444E, DT466, DT530, and DT570.

• Contains: two gauges (0 - 100 PSI gauge, and 0 - 30 inHg gauge), a 4-ft. hose and four adapters.

$359.22

LGTU-32-4PB

FORD POWER STROKE DIESEl PRESSuRE TEST KIT• For diesel fuel pressure testing on Ford Power

Stroke engines 1994 to present. • Includes a 100 PSI gauge, a bleed off

valve hose assembly, and all the adapters necessary to pressure test the fuel system on Power Stroke engines.

$331.10

LGTU-32-7

OIl PRESSuRE TEST KIT FOR HIGH PRESSuRE SYSTEMS• Used to diagnose the inline pressure, pressure

loss to one head, and oil pump deadhead pressure

• Applicable: Ford Power Stroke 6.0L and 7.3L as well as International T444E and VT 365E engines.

$917.99

AHFM2330

2.3 MAZDA AND FORD TIMING KITUsed on all of the 2.3L engines. (Turbo and

Naturally Aspirated)• Applicable to: Mazda: 3 (2004-2009), 5 (2006-

2010), 6 (2003-2008), Mazda speed 3 (2007-2012), Mazda speed 6 (2006-2007) and CX-7 (2007 -2012).

$76.13

TA34300

HEAVY DuTY COMPRESSION TESTER FOR GASOlINE ENGINESTest gasoline engines ondomestic and foreign cars, trucks, motorcycles, snowmobiles and lawn mowers. • Flex hose eliminates need to remove auxiliary

equipment such as power brakes and steering, air conditioning and manifold. Screw-in adapters guarantee accuracy over push-in type testers.

$130.63

LGTU-32-2

BASIC DIESEl FuEl PRESSuRE TEST KIT• Used to test fuel pressure between the lift

pump and the injection pump on diesel engines.

• Includes 100 PSI gauge assembly with 4-ft. hose, pressure relief valve and 6-ft. clear PVC tube, 5 banjo bolt adapters ranging from 8mm to 14mm and 1 Repair Kit.

• Can be used to test most diesel engines from single cylinder to V32 models.

$232.29

20




IMPORT SPECIALTY PULLERS AND CAM TOOLS

OT4579

SlIDE HAMMER SET• Two- and three-way cross blocks and cone

provide the perfect jaw configuration• Set also includes a grip wrench adapter and a

dent puller attachment for sheet metal or other unique pulling requirements.

$126.38

OT4532

7 TON - MulTI-PuRPOSE BEARING AND PullEY PullER KIT• Wide Spread Crossbar with 3 pin-hole; 7-1/4” to 9”• 2 pair of long reach jaws gives user reach

options of 5-1/2” and 9-1/2”• 2 long reach forcing screws (live center) for

pushes of 4-1/2” to 10-1/2”

$224.82

OT4534

MulTIPuRPOSEBEARING & PullER SET• Spread: 3” to 5”, Reach: 1” to 2-1/4”

$203.51

AHT40011

3 PIECE lOCKING PIN SET• 3 Piece locking pin set used to lock the timing belt tensioner while relieving pressure from the belt. Applicable: VW/Audi 3.0L V6 (5V), some 1.8L 4 Cyl (5V) turbo and 4.2L V8

5V with timing belt.

$19.30

AHT40026

CRANK lOCK PIN• Crank Lock Pin used to lock the crankshaft

at TDC position when replacing the timing belt. Applicable: Audi 3.0L V6 (5V). Used in conjunction with tools T 40011, T 40028, and T 40030.

$48.70

AHT40028

CAMSHAFT ADJuSTING SOCKET• Camshaft Adjusting Socket

used to adjust variable valve timing on the exhaust side camshaft to basic position. Applicable: Audi 3.0L V6 (5V). Used in conjunction with tools T 40011, T 40026, and T 40030.

$52.22

AHT40030

CAMSHAFT AlIGNMENT FIXTuRE• Camshaft alignment fixture used

to hold and align the camshafts. Applicable: Audi 3.0L V6 (5V), used in 2002-2005 Audi A4 and 2002-2004 Audi A6. Used in conjunction with tools T 40011, T 40026, and T 40028.

$282.01

OT4527

BEARING SPlITTER PullER SET• Push Puller is thread

matched to the splitter.• Interchangeable legs shorten or

lengthen the range of pull.• Designed of high quality tool grade materials for

a lifetime of use.• For use on most bushing or bearing jobs up to 3”

in diameter.

$147.28

OT4518

5-TON BAR-TYPE PullER-BEARING SEPARATOR SET• Includes two popular bearing “splitters” (2” and 3”), four sets of hex push-puller legs and a bar-type puller head

with a 9/16” forcing screw• 5” puller cross-bar with a 6-1/4” forcing screw

$120.06

For a wide range of pulling jobs, including: bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, and harmonic balancers.

VW AUDI CAM TOOL

FIX

AHT10252

VW-AuDI CAMSHAFT lOCKING TOOl• Camshaft Locking Tool for the 2006-2008 VW/Audi 2.0L Turbo Engines (BPY). • Used in conjunction with: AHT40080, AHT10115 & AHH2587-2.

$137.58

OT4581

BlIND HOlEBEARING PullER SET• For pulling jobs requiring an internal pull, such

as pilot bearings.• Four collet sizes: 7/16” to 1/2”, 9/16” to 11/16”,

5/8” to 1”, 1” to 1-1/4”.$193.81

OT4526

HEAVY DuTY SINGlE PRESSuRE BEAM BEARING SPlITTER• Push Puller is thread matched to the splitter.• Interchangeable legs shorten or lengthen the

range of pull.• For use on most bushing or bearing jobs up to

4” in diameter.

$244.21

AHT4306

AuDI 3.0 lITER TIMING TOOl SET• Do the job like the dealer• Applicable: Audi 3.0L V6 5V, used in 2002-2005 Audi A4 & 2002-2004 Audi A6.

$414.54

OT6540

REAR AXlE BEARING PullER SET• Set contains slide hammer and popular

attachments needed for servicing flange type floating rear axle bearing and seals

• 7495A fits min. bearing tube I.D. of 1” and max axle tube I.D.of 1-7/8”. 7496A fits min. bearing tube I.D. of 1-5/16” and max axle

$222.89

AHT40005

CAMSHAFT AlIGNMENT TOOl FOR AuDI 40V V-8Used to hold both camshafts at TDC position while replacing the timing belt. Used in with #3242. • Applicable: Audi/VW with 40v V8 (5v per

cylinder) with timing belt.$163.49

AH7200

CAMSHAFT PullEY HOlDER KITFits belt-driven 4, 6 and8 cylinder Toyotas & VW/Audi 1.8L,2.0L turbo, 2.0L BBW, 2.5L, 3.2L.& Comes w/ 3 sets of interchangeable pins. • Overall length 18”. 12” Spread between pins

at tip of arms, when pivot arm is at 90º. • GM Pins sold separate (7200-4)

$160.09

CV95400

MASTER IN lINE DOWEl PIN PullERMaster Set includes both SAE and Metric Collets• Extracts Dowels without the use of a slide

hammer.• Can be used with air ratchet, or traditional

ratchet.• SAE sizes includes 3/16, 1/4, 5/16, 3/8, and 1/2• Metric sizes Includes 4, 5, 6, 8, 10, and 12MM

$215.49

OT7793

MASTER BOlT GRIP PullER KITIncludes:• One heavy duty, forged, three way puller flange • Two different length live center forcing screws • Four live center adapters • Eleven sets of heavy duty, washer head,

hardened steel bolts • One special set of shoulder bolts for the 3300

/3800 GM V6 $184.12

OT7196

uNIVERSAl CRANK & CAM SEAl SERVICE KITRemoves and installscamshaft and crankshaft seals on cars and truck/van/suv’s without damage. • The interchangeable seal install adapters are

designed for use with the cam or crank bolt. Kit services seal sizes of 21.5mm to 64mm.

$184.12

OT7419

TIMING TENSIONER lOCKING PIN SET• This pin set is used to lock timing belt or chain

tensioners once they have been compressed, required during the service procedure.

• 6 pin set with clip to cover most all applications.$12.37

21




HARMONIC STEERING AND ENGINE PULLEY TOOLS

AO7846

HARMONIC BAlANCERPullER SET• Designed for use on harmonic balancers,

crankshaft pulleys, steering wheels and gear pulleys

• Can be used on tapped flywheels of electric or two-cycle motors

$65.14

AO7874

POWER STEERINGPullEY KIT• Removes pressed-on alternator and power

steering pulleys• Installs late model GM alternator & power

steering pulleys including Quad 4$25.80

OT4530

• A complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles.

• Fits pulley hubs with diameters of 1- 1/8”, 1-1/4”, 1- 5/16” and 1-3/8”.

• Includes the necessary adapters for servicing: GM 3.1 L, 3100, 3400, and 3800 V6 engines, GM 2.3L Quad 4 four-cylinder engines and Ford 4.6L, 5.4L, and 5.8L modular V8 engines.

$62.26

OT6294

MASTER BOlT PullER SET• Covers almost every car,

pick-up, & SUV• Use for: harmonic

balancers, steering wheels, crankshaft pulleys, and gears.

$144.45

OT6667

GM/CHRYSlER/MISuBISHI HARMONIC DAMPER PullEY PullERUse on the following:•GM 2000 Generation III

4.8L, 5.3L, 5.7L 6.0L, and 8.1L V8s.

Also works on Cadillac 4.5, 4.6, and 4.9L V8s beginning in1988. Chevrolet trucks 2003–later 4.2L I6, 2004–current 3.5L I5 and 2005–current 2.8L I4.

$103.80

KD3970

HONDA ACuRA CRANKSHAFT HOlDING TOOl• Fits most Honda & Acura 4-cylinder applications

from 1990 and up.ir.• Works with 1/2” square driv

$49.44

KD41600

MulTI uSE PullER KIT• Master Bolt Grip Kit works on harmonic

balancers, steering wheels, crankshaft pulleys, and gears.

$61.89

OT4531

HARMONIC BAlANCER REMOVER INSTAllER SET• For easy removal

of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft.

• Adapter sizes included: M16 x 2.0, M14 x 1.5, M12 x 1.5, 1/2”-20, 7/16”-20, 3/4”-16, 5/8”-18, and 9/16”-18.

$137.21

POWER STEERING PuMP PullEY KIT

OT7790

MASTER FlANGE-TYPE PullER SET• Versatile puller capable of removing a wide

variety of components having tapped pulling holes, including harmonic balancers, gears, crankshaft pulleys, etc.

• Capable of handling 2- or 3-way bolt pulling applications.

$134.69

SL64400

3.4l TOYOTA HARMONIC DAMPER PullERY HOlDER• This tool works on the following trucks and SUV’s. 4 Runner 1996-2002• T100 pickup 1996-1998. Tacoma pickup 1996-

2004. Tundra pickup 2000-2004

$85.93

CV750

22 PIECE AlTERNATOR DECOuPlER KIT• Used to install and or remove Alternator

Decoupler Pulleys • The tool can be used on products produced by

all of the major ADP manufacturers, such as INA, Gates and Litens.

$112.09

OT7984

MASTER STEERING WHEEl SERVICE SET• Includes a forged puller flange with 5 sets of

hardened hex head bolts for 2 or 3 way pulling configurations and steering wheel puller legs

$160.47

OT6616

ECOTEK WATER PuMP TOOl• Tool saves costly loss of timing on

2002-2008 GM 2.2L and 2.4L

$52.92

CM8088

10MM 12 POINT BOSCH AlTERNATOR TOOlUsually the only tool needed for most jobs!• Applications include VW, Audi, BMW, Mercedes,

Opel, Porsche, Renault and Ford. Use with 1/2” drive tools

$19.50

LS57650

AlTERNATOR DECOuPlER PullER TOOl KITFive piece kit for removing and installing many

alternator Decoupler pulleys on the most popular vehicles

• Kit works on both OAD and OWC pulleys. • Can be used while the alternator is on or off the

vehicle.$33.08

SL64900A

HARMONIC DAMPNER PullEY SET• Spring loaded legs for leg position retention• Remove the harmonic damper pulleys found

on many Chrysler and G.M. engines• Eliminates the time consuming process of

removing the radiator or other components

$118.61

CV753

13 PIECE AlTERNATOR PullEY SERVICE KITUsed to service many popular late model vehicles

with both OWC and OAD alternator pulleys.• Covers most US, Euro, makes and models with

both on and off vehicle$68.64

CV195

POWER STEERING PuMP PullEY REMOVER/INSTAllERRemove and install power steering pump pulleys

on most cars with Saginaw, Thompson, and Ford C111 and C2 power steering pumps.

• Fits 1-1/8”, 1-1/4”, 1-5/16” and 1-3/8” pulley hub diameters, including 1988–newer GM cars equipped with Quad 4 engines;

$63.91

22




SERPENTINE, PULLEY AND STEERING TOOLS

SL63600

AuDI AND VW FAN CluTCHPullEY HOlDING TOOl• For Audi 1996 - 2001 A6

2.8L V-6 & VW 1998 & later Passat 3.0L V-6

• Use SL63600 with companion tool SL62100

$85.93

KD3680

GEAR WRENCHSERPENTINE BElT TOOl• 100% coverage of all vehicles including the 3/4 Volvo• Easy access with both crowsfoot and socket sizes

$90.63SL62100

32MM BMW &AuDI FAN CluTCH WRENCH• BMW & Audi Fan Clutch Wrench

$46.37

KD41620

STEERING WHEEl PullER KIT• Remove steering wheels from most domestic

and import cars with or without telescoping tilt columns.

• Use the puller legs with the steering wheel puller to remove steering wheels on late model GM vehicles

$59.67

SL99800A

GM / CHRYSlER WATER PuMP FAN CluTCH PullEY HOlDER• Used on vehicles using pressed on pulleys. • With the use of a 36 mm open end wrench

part #88550, #93260 or #95210 the technician can loosen and tighten the fan clutch on many 1998 and later trucks/suv’s

$85.93

SL10200

TOYOTA SERPENTINE BElT WRENCH• Saves time, no need to use a vehicle hoist to

R&R serpentine belt• Specially designed 12 point 14 mm/19 mm

sockets• Applications: 2002 - present Camry; 2004

- 2008 Solara; 2009 - present Matrix; 2001 - present Highlander; and 2004 - present Rav 4

$75.19

SL10800

3 PIN FAN CluTCH PullEY HOlDING TOOl• Works on the 2009 and later 5.7 liter Hemi

Truck engine• Engages the hard to reach holes on the

conical shaped water pump pulley.$85.93

SL10950

HONDA / ACuRA SERPENTINE BElT TENSIONER WRENCH • Fits 2006 & later Civics and works on most

Honda and Acuras• 6 point 19 mm won’t strip the aluminum hex

on the belt tensioner$75.19

SL10900

FORD DIESEl FAN CluTCH PullEY HOlDING TOOl• Works on 2011 - newer 6.7 Liter Ford Diesel

Power Stroke. 100% Made in USA$85.93

LS43600

uNIVERSAl FAN CluTCH WRENCH SET• A Nearly Universal Fan Clutch Wrench Set!

• Unique hooked wrench design will hold bolted on water pump pulleys

• 1/2” square drive allows extra force to be applied.

$66.19

LS43300

PNEuMATIC FAN CluTCHWRENCH SET FORD GM & CHRYSlER• Set includes 7 driving wrenches that fit Ford, GM

and Chrysler. • Driving wrench sizes include: 36mm, 1 1/2”, 1

9/16”, 41mm, 42mm, 1 7/8” and 2”. Use with an air hammer.

$171.30

SL61500B

G.M. DIESEl WATER PuMP FAN CluTCH PullEY HOlDERUsed on vehicles using pressed on pulleys. • G.M. 6.5 Liter diesel engine 2000-2001.• suzu-Duramax 6.6 6.6 Liter

$85.93

LG5139

FlEXIBlE lIGHTED SERPENTINE BElT TOOl• LED ensures easy visibility on dark engine

compartments.• Extra-long 33” length

$32.84

SL11250

BMW SPRINTER VAN OFFSET PullEY HOlDER•R&R BMW 4.0 Liter and 4.4 liter V-8 engines with

bolt on water pump pulleys.• Sprinter Vans 3.0 Liter, Dodge 07-09, Mercedes

2010 and later$85.93

SL11500

SMAll PIN CAM GEAR HOlDER• Small diameter pins (10mm) with special groove• Works great on early Honda’s and Acura’s 1988-

1995 Civics and Integras$85.93

OT4803

uNIVERSAl PullEY HOlDER SETUse to hold pulleys, clutch hubs, flywheels, gears,

and sprockets with internal or external teeth up to a 4” diameter.

• 5, 6, 7, 10, and 16mm pin sets.$93.41CV752

VARIABlE PIN SPANNER WRENCH SETFits many different types of pulleys having slots or holes • Wrench is adjustable from 1-1/4 inch to 5

inches; works with a 1/2 inch drive ratchet or breaker bar.

$73.37

OT6613

VARIABlE PIN SPANNER WRENCH KIT• Universal design fits many different types of

pulleys having slots or holes, including camshaft pulleys and Wrench is adjustable from 1-1/4 inch to 5 inches; works with a 1/2 inch drive ratchet or breaker bar.

$93.43

OT7424

BElT HOlDING TOOl• Keeps belt from falling off of a pulley during belt installation.• Super strong magnet to hold the belt firmly on

the pulley.• Multiple holders can be used for belt

applications that fit around many pulleys.• Durable plastic housing with magnet for steel/

iron pulley applications.$20.73

AHMC114

MINI COOPER SERPENTINE TOOl SETEach set comes with a onelarge and one small 12 point wrench. • ONLY SOLD AS A PAIR, since you can not distinguish which tool is needed to visibility issues.

$143.93

23




ENGINE, BUSHING AND BEARING SERVICE

LS12800

MASTER PNEuMATICBEARING RACE AND SEAl DRIVER SET• This Master Set Contains 11 Drivers to Fit

Automobiles and Trucks up to 1 Ton.• This set also includes 2 handles, one for

hammering and a pneumatic handle for use with an air hammer.

$119.88

SL88750A

uNIVERSAl COMPACT OXYGEN SENSOR WRENCH 6/12 POINT

$31.14

LS12390

DuAl DRIVE OXYGEN SENSOR SOCKETTool comes with both 1/2” and3/8” drive; Fits oxygen sensor applications with a heat shield.

$23.74

KD41720

8 PIECE MASTER OXYGEN SENSOR SOCKET KITAllows for easy removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches on many import and domestic vehicles• 1-3/16”, 7/8” (22mm), 1-1/16” (27mm), 7/8”

(22mm), 7/8” (22mm), 7/8” (22mm) Low

$69.13

OT4572

lARGE VAlVE SPRING COMPRESSOR• Two valve spring adapters, fit valve spring

retainers up to 1” and 1-3/16”.• Jaw opening (A) of 1-3/8” to 5-5/8” throat

clearance of 5-7/8”.$79.91

Item # Pics Spread Reach Price

OT4420 A 3/8” to 1 1/2” 3/16” to 1 1/4” $51.89

OT4421 B 5/8” to 1 1/2” 3/16” to 1 1/4” $28.64

OT4422 C 3/8” to 1 1/2” 3/16” to 1 1/4”. $57.27

Item # Spread Price

SU210MZB Nissan $17.07

SU212MZB Honda $17.07

SU214MZB Toyota $17.95

Item # Size Price

CM8600 Small - 1/2” Drive $31.96

CM8605 Large - 3/4” Drive $52.95Remove pilot bearings, thrust washers, and smaller bearings hidden in a shaft or housing

These 1/2” Drive Impact Sockets are Specially Sized for Tightening and Removing Most OEM Head Bolt Screws from These Brands of Vehicles

• Small: Fits hydraulic cylinders on vehicles with gland nuts from 1” to 3-3/4” / 25 to 95mm. Reverses to work on 1/4” or 7/32” pinholes. • Large: fits 2” to 6” / 51 to 152mm (pin to pin). Reverses to work on 17/64” or 21/64” pinholes.

Head Bolt SocketsSpanner Style Gland Nut

Wrenches

C

B

A

Pilot Bearing Pullers andAttachments

OT4842

HEAVY DuTY VAlVE SPRING COMPRESSOR• Heavy duty c-frame has a 9” opening and a 5”

throat. • Kit includes 16mm, 19mm, 23mm, 25mm, and

30mm valve spring retainer adapters.$103.78

OT4838

PISTON RING COMPRESSOR SET W/RING EXPANDER6 Ring set covers 2 7/8” thru 4 3/8” piston

diameters.• Compressor pliers feature a ratcheting lock to

hold the handles in position$93.41

OT4840

PISTON RING COMPRESSOR SETIncludes 12 chrome plated compressor sleeves

covering 1 3/8” thru 4 3/8” diameter piston applications.

• Both feature a ratcheting lock to hold the handles in position

$164.72

CM2112

VAlVE SPRING AND SEAl COMPRESSOR KITReplaces valves springs and valve stem

oil seals without the need to remove the cylinder head.

• Applications include BMW, VW, Audi, Hyundai, Toyota, Ford, Renault, Opel, Seat and Clio.

$119.96

CM2235

VAlVE SPRING COMPRESSOR KITUse with the cylinder head or off the car• Tool bolts to the head while the lever pivots

from the base to compress the spring. • Services most domestic and import car

engines.$127.96

LS59370

STRETCH BElT REMOVER INSTAllERCombination removal and

installation tool for most stretch belt applications found on many accessory drive systems.

• Unique magnetic faces hold the tool in place on the pulley.

$21.71

LS17630

uNIVERSAl SEAl INSTAllERUsed to install many sizes of seals.• The flexible arms of the spider keep the seal

centered during installation. Includes two driver and spider sizes along with long and short handles.

$64.43

LS39000

NO-SlIP” PullEY PullER/INSTAllERRemoves and Installs Pressed onPower Steering, Alternator and Air Pump Pulleys.• Fits most domestic models including GM 3.1

and Quad 4 engines. • Works on traditional V shaped pulleys and

serpentine belt system pulleys

$67.94

OT4437

8 PIECE OXYGEN SENSOR SOCKET SET• Special set of sensor, O2, and switch sockets

covers most applications found on todays vehicles to provide easy removal and installation of hard to reach sensors.

$98.62

24




Import Specialty

SPECIALTY AND IMPORT SERVICE TOOLS

D

AH3462 A VW/Audi Cylinder Head Bolt Socket (#10 Polydrive) $32.62

AH3391 B VW/Audi Camshaft Alignment Tool (V-6/5 valve per C $172.07

AH3243 C VW/Audi Camshaft Alignment Tool (V-6/2Valve per Cycle $172.57

AH6632 D Vw/audi coil pack puller $46.59

AH6500X-18 E 1/2” Drive 18mm 12 Point VW Rear Axle Socket 2006 Jetta and Golf R&R rear axle bolt $34.79

AHBMW2280 F BMW Dual Fan and Water Pump Removal for BMW M60, M62, and M62 TU (V8) and M10, M20 and M30 with 32mm fan clutch nuts $69.21

AHBMW400 G BMW Camshaft Alignment Tool (4and 6 cycle engines) $238.17

AHM0349 H Mercedes Radiator Adapter For Cooling System $54.86

AHHON1419 I Honda Civic, Accord, Odyssey & Pilot Serpentine Belt Wrench 25” Long 14mm & 19mm 12-Point Secured Sockets, for Engagement Every 30 Degrees. $46.33

AHM2010ACP J Fuel/Evap Angled Clamp Pliers for the replacement of new style Fuel/EVAP hose clamps. $53.80

AHMC100 K Mini Cooper Serpentine Belt Tool used for relieving tension on belt tensioner. Applicable to: “Supercharged” Mini Cooper Models. $103.16

AHSPR886 L Dodge Sprinter & Chrysler Crossfire Transmission Dipstick. Use in conjunction with factory repair literature to get correct fluid level measurements. $68.97

AHSP1412 M BMW Spark Plug Socket, 12 Point 14mm $36.31

AHSU3625 N Subaru Cam Sprocket Holder for 2005 and newer 2.5L Turbo and the 3.6L 6 cylinder engines. $137.80

AHTOY1914 OToyota Serpentine belt tool equipped with 14mm & 19mm, 12 point securing attachments. Applicable to: 1998–2005 Corolla, 2004 Matrix, 2008 Highlander V6 (Non Hybrid), 2002 RAV4 & 4.7L & 5.7L V8 used in Tundra & Sequoia through 2008.

$43.43

AHH2592 PVW Multitooth Adapter Spline for Free Wheel Pulley. Used for the R and R of the free-wheel pulley on the alternator (same as VW factory tool# 3400). Use in conjunc tion with the AHS3054X-10 Socket (not included). This tool is applicable to VW Jetta with 1.9 liter TDI engines.

$38.79

AHS54X-14 Q 14MM 12 Point VW Rear Brake Caliper Socket. Ideal for Use on Rear Brake Caliper Bolts. Applicable to: 2006 and Newer VW Jetta and Passat $38.55

AH200-7 R 7mm Stud Remover Used for BMW applications $24.02

AHAU40178 S Engine Oil Dipstick For Audi 2009 Audi; 2009 A4, A5 and A6 with engines; 2.0L TFSI, 3.2L FSI and 4.2L FSI $69.14

AHM1620 T Mercedes Motor Mount Wrench Fits 272 and 273 engines $34.00

AHBMW11860 U BMW Head Bolt Socket T60 Torx and 195mm long $49.47

J

CM

L

B

N

H

F

G

VOlKSWAGEN AuDI12 POINT AXlE NuT SOCKET SET• 14MM Allen, 17MM Allen for VW- Audi A6 1999-

2004 newer Audi A4. 30MM 1/2” Drive Socket Mid 99 and newer Golf, Jetta, Cabrio and Beetle. 32MM 3/4” Drive Socket - VW Touareg

$102.66

OT5609

CYlINDER lEAK DOWN TESTER• Quickly diagnose internal

engine problems such as bad rings, valves and leaking head gaskets.

• Dual 2-1/2” gauges with protective outer boot.

• Scales read 0-100 psi and 0-700 kPa. • Pressure regulated manifold. • Long flex 24” 14 mm hose. • 10 mm, 12 mm and 18 mm thread adapters.

$103.80

AH6500

A

E

I

Serpentine Tools

K

O P Q RS

SL69610

12 MM X 1.75 THREAD• Use on Chrysler, GM, Ford, Mazda, Saturn, Volvo,

Isuzu, Saab and other vehicles with 12 mm X 1.75 thread.

$26.86

SL69630

14 MM X 1.5 THREAD• Use on 1999 - present GM, Ford, Dodge full size 2

wheel drive trucks and SUV’s, Chrysler, GM, Ford, Honda, Nissan, Infinity, VW, Audi, Mazda, Volvo, Mitsubishi, Kia, Hummer, and other vehicles with 14 mm X 1.5 thread.

$26.86

Hub Bearing Removers for use with Air Hammers

KSCLT-2PB

CYlINDER lEAK TEST SET• Pinpoints bad valves, worn rings, cracked cylinder walls, and blown head gaskets. • Features a precision regulator with a combination M14 and M18 adapter on a 26” hose assembly and has dual easy-to-read gauges

$119.34

TU

AHSU7250

SuBARu CRANK PullEY HOlDER• 1/2” Drive, Ratchet NOT included • Used to Hold the Crankshaft on 2.5L (Non-

Turbo) DOHC Subaru. Comparable to Subaru #499977100

$103.71OT7484

uNIVERSAl TIE ROD ADJuSTER• Unique lever design will turn hex rack ends or

hex shafts from 1” to 1 5/8”.$59.14 CV185

FRONT END SERVICE SET• Two Pitman Arm Pullers for large or small ball

joint applications. Two Ball Joint Separators. Three different Tie Rod Pullers.

$136.41

25




STRUT, BALL JOINT AND CHASSIS REPAIR

SL65130

HONDA/ACuRA BuSHING X-TRACTOR• Easily and quickly remove and install trailing

arm bushing in 15 minutes per side versus the Honda factory “book” time of 1.8 hours per side.

• Comes updated with an adapter ring to fit between the existing cup and bushing for Acura Integras 1990-1993.

• No need to disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines and emergency brake cables.

$230.71

Correctly Installs The Seal Onto The Axle Shaft and Into The Wheel Knuckle, Preventing Front Hub Vacuum Leaks That Would Cause The 4WD To Not Engage.

OT6697

FORD AXlE SHAFT SEAl INSTAllER lATE MODEl F250/350• Works on 2005-newer Ford F-250,

F-350, 4X4s having the vacuum-operated front axle.

$106.58

OT6698

FORD AXlE SHAFT SEAlINSTAllER lATE MODEl F450/550• Works on 2005-newer Ford F-450,

F-550, 4X4s having the vacuum-operated front axle.

$125.97

OT6695

FORD VACuuM HuB INSTAllER• Works on 1998–newer Ford F-250, F-350, F-450,

and F-550 4X4s having the vacuum-operated front axle.

$103.80

LS41400

STEPPED PICKlE FORK KIT• Step Design Helps Keep Tool from Bouncing Back When Separating Ball Joints, Steering Dampeners, Tie Rods, Pitman Arms and Other • Applications. Six tools in one. One handle for

hammering; one for use with an air hammer (.401” shank). Forks are heavy-duty heat-treated, alloy steel forgings. Steps can be resharpened if needed.

$60.88

OT6591

STRuTTAMER EXTREMESimply the most effectivecompressor for virtually anystraight, conical, or offset spring.• Extreme duty design to handle the heavier springs found on mid- and some full-size truck strut assemblies.• 2:1 reduction gearbox - standard. Allows for

a 2:1 torque compression increase when compressing struts.

• Open-ended design means you can take the strut in and out, quickly and easily.

• The arms adjust in and out, up and down, to accept many sizes of springs.(2-1/2” to 10” diameter)(2-1/2” to 24” vertical stroke)

$912.58

OT7180

uNIVERSAl BEARING CuP INSTAllER• Designed for installing wheel bearing cups of

tractor/trailer wheels from 11000 to 50000 lb. capacity

• Adjusts from 3 5/8” to 6 1/2” dia. bearing cup O.D.

$368.27

OT7503

OuTER TIE ROD REMOVER• Works on FWD and RWD import and domestic

vehicles.• Up to 5 tons of force can be applied.

$93.43

LS38210

HuB REMOVAl KIT FOR DODGE• Separates the Frozen Hub Assembly from the

Steering Knuckle on Dodge Vehicles.• Tool drives against loosened retaining bolts to

separate assembly. • Prevents damage to the knuckle and complete

hub assembly.

$41.58

Axle Shaft Installers

KD41690

FRONT END SERVICE KIT• Comprehensive set allows for easy removal of

the most popular types of Pitman arms, tie rods, and ball joints

• Kit Contents, Pitman Arm Puller 22 x 140mm, Tie Rod Puller, Universal Ball Joint Separator, Tie Rod End Puller and Pitman Arm Puller and Universal Tie Rod End Remover

$136.72

OT7822A

GM TORSION BAR uNlOADING TOOl• Accommodates the beefed-up torsion bar• Works on 1988 and newer GMC and Chevrolet

1/2- 3/4- and 1-ton pickups; S-10 Blazers S-15 Jimmys 4WD pickups with 4.3L V-6 engines; and 1991 and newer Olds Bravada.

$184.12

BK7400

WAll MOuNT STRuT COMPRESSOR• Handles the heaviest coil-over-shocks, the Ford F-150 and even the Toyota RAV-4 without need for additional adaptors. • The front is now opened for easier access with added longer handles for extra torque.

$1,150.85

SM71410

AXlE POPPERBreak loose hafl shafts with ease. • Tapered ends of the fork allow the technician to

strike the Axle Popper Wedge or use it as a pry bar to release the half shaft.

• The Shim is included to fill the gap between the half shaft and the transaxle on some vehicles.

$62.95

JDTC-614

T.O.M.C.A.T. CAMBER ADJuSTMENT TOOl• Makes Camber Adjustment a One-Man Job• Inflatable air bladder fits between tire and strut

for easy and controlled adjustment of camber settings.

• Camber can be easily set with wheels on the ground.

• Eliminates the need for special camber bolts. $235.65

OT6494

ClAMSHEll STRuT COMPRESSORFits a wide range of strutsand requires no special adapter shoe.• Safety locking pins hold the compressor jaws in

place.• Tool compresses springs of 4” to 9” O.D., with wire

diameters of 7/16” to 11/16”.• Built to use with an impact wrench

$275.29

OT6578

HuB ClAMP EXPANDER KITRemove most stubborn struts and ball joints with

ease.• Mounts in the pinch bolt holes and drives the

anvil into the pinch slot, expanding the mount for easy component removal.

$116.27

26




BUSHING, BALL JOINT, CHASSIS AND AXLE REPAIR

OT6539

TRuCK MASTER BAll JOINT SERVICE KITThis 55+ piece kit covers pressinball joints on the following:• Toyota, Hyundai, KIA, Infinity, Isuzu, Nissan,

Chrysler, Dodge, Jeep, Plymouth, Mitsubishi,• Ford, Lincoln, Mercury, Mazda, Chevrolet, Buick,

Oldsmobile, Pontiac, Cadillac, GMC, Hummer.$863.19

OT6529

MASTER BAll JOINT SET DOMESTIC AND FOREIGN AuTOS• Master Service Kit - 50+ piece set.• Comprehensive manual includes diagrams

with instructions eliminating guesswork of which adapters are required.

$681.46

ET91800

REAR BEARING PullER•Saves time and effort, Quickly and easily

remove rear bearing wheel axles. • No more banging with a slide hammer to

remover these difficult bearings. • Use the yoke and feet to set the removal foot

over the bearing. Use an air wrench and remove the bearing completely

$72.07

AO7865

BAll JOINT & 4WHEEl SERVICE TOOl• The heavy duty tool set is excellent for removal

and installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins

• It will remove even rusted and corroded parts$105.23

AO7868

uNIVERSAl BAll JOINT ADAPTOR SET• Includes all the receiving tubes and removing/

installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles.

$84.00

KS2577

FlOATING AXlE RESTORER SET• Aids in the servicing of front and rear floating

axle housings on sport utility vehicles, light and medium duty trucks and vans

• Sizes include: 1-5/8” x 16, 1-13/16” x 16, 2” x 16, 2” x 16LH, 2-1/8” x 16, 2-1/4” x 16, 38 x 1.50mm

$188.33

AO7897

MASTER BAll JOINT SERVICE KIT• Removes and replaces ball joints• C frame press alone can be used to remove

and replace universal joints• Set includes all the receiver tubes and

removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles through 1997

$186.52

LS46800

MASTER INNER TIE ROD SET• Works on Inner Tie Rods with Inaccessible

Wrench Flats.• The inner tie rod can be removed and installed

without removing the rack.

$132.41

MH29910

AuTO ADAPTING TIE ROD TOOlDesigned to remove and mount inner tie rods on

vehicles. • Features a roller and cam mechanism that

adapts itself automatically to every kind of shape and diameter of the inner tie rod.

• Range: 35mm - 45mm / 1-3/8” - 1-3/4”• Works on 99% of inner tie rod models.

$170.97

Item # Size Sale

SU10213 1-59/64” $22.81

SU10214 2-9/64” $22.95

3/4” Drive Impact Ball Joint Sockets For Select Chrysler Cars And SUV’s

SL11100

MANuAl BuSHING KITService a wide range of bushings without removing components from the vehicle. • Comes with 22 cups and receivers for 100’s

of size combinations (Range OD 44 mm / ID 34 mm to OD 90 mm / ID 80 mm)

• 4 acme thread spindles, 10 mm, 12 mm, 14 mm & 16 mm featuring ball bearing thrust washers to insure smooth operation

$656.19

OT6559

BAll JOINT MASTER SERVICE KIT• Complete coverage of Car and Truck/Van/SUV

applications. With 70+ adapters, c-frame and application guide means there is nothing else to add for servicing ball joints.

• Contains application charts and diagrams with step-by-step instructions.

$1,026.21

CV94800

uNIVERSAl HuB PullERTool will remove wheel hubs mounted on tapered

axles and press fit rear brake drums. • Can be adjusted by legs to an 8-in. diameter

bolt circle. • Made of alloy steel and drop forged, this heavy

duty tool has a center screw 1-in.-14 x 9-in. with a 1-1/8-in. hex head.

$113.49

CV956

9-WAY SlIDE HAMMER PullER SETPulls flange-type rear axles and most front-wheel

drive hubs.• Two- and three-way cross blocks and cone

provide the perfect jaw configuration for most jobs.

• Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.

$123.08

CV526

FlANGE TYPE AXlE & FRONT WHEEl HuB PullER• Range is 3-3/4-in. to 4-1/2-in. • For use on 4,5, or 6 bolt stud design and all

non-C lock GM axles.

$30.75

27




STRUT, BALL JOINT. CHASSIS REPAIR AND U-JOINT

Tie Rod Tools foruse in Pneumatic Air Hammers

OT4520

DIFFERENTIAlSIDE BEARING PullER SET• Includes 4 step plate adapters to fit carrier bearings.• Reach: 1-5/8”. Spread: 2-5/8” to 3-3/8”.• Forcing screw is 3/4”-16 mm x 6-11/16” lg.

$145.35

SU212ZUMDL

FORD DRIVE lINE FlEX IMPACT SOCKET• 12mm 12 Point 1/2” Universal Impact

Socket, 4-9/16” long

$31.23

TA62200

COIl SPRING COMPRESSORSingle Action Coil Spring Compressor Remove,

install and compress coil springs that can be reached through the center of the coil. Acme threads.

$66.18

TA63000

uNIVERSAlMACPHERSONSTRuT COIl SPRING TOOlUse with impact wrench or hand tool ON or OFF the car.car. Contains complete instructions and safety kit. Not for use on any unusually large MacPherson Strut springs which have a coil outside diameter of over 6” or a wire diameter larger than 5/8”. Do not use on General Motors “A”, “C”, “J” or “X” Body cars.

$43.56

OT5190

HEAVY-DuTY uNIVERSAl JOINT PullER• Fits practically all Class 7 and 8 trucks, including:

Spicer drivelines 1610, 1710, 1760, 1810, 1880 Spicer SPL 140, 170, and 250 “Life Series” Meritor (Rockwell) 16N, 17N, 18N, 1710 Meritor RPL 20 and 25 “Permalube” Series

$358.58

TA61800

STRuT AlIGNMENT lEVEl• Use to restore strut to original alignment position

after repair or replacement. • Super strong magnet mounts on brake rotor or

spindle. Works on all vehicles equipped with MacPherson Struts.

$32.92

Quickly and easily removes sealed U-joint cups without the need for hammering or heat.

KD3995

INDEXIBlE SEAl PullER• Provides 11 total positions for unmatched

access• Easy to use spring loaded button firmly locks the

position in place

$29.94

KD43990

• Indexes every 20 degrees to allow for better access and hand protection

• Works with manual or pneumatic hammer attachments

$82.42

LS54640

PNEuMATIC TIE ROD RATTlER• Loosens bolts and clamps on tie rods for

removal or adjustment. • Use with an air hammer to vibrate seized

clamps and bolts on many sizes of tie rods. Standard .401” shank

$26.46

TRuCK PITMAN ARM PullER• Services medium- and

heavy-duty trucks. Max jaw spread: 2-1/4”.

OT7311A

PITMAN ARM PullER

$94.46

OT6496

SuV PITTMAN ARM PullER• Labor intensive removal of steering sector is

now unnecessary. • Compact design of puller allows easy access

to the Pitman arm. • Fits most domestic SUVs and pickups.

$104.86

• Services cars and light trucks to 3/4-ton

OT7310A $104.86

TA66370

10 lBS FRONT WHEEl AND HuB PullER SET• Heavy duty 10 lb. Slide Hammer on Steel Shaft

reduces effort, time and labor to make a tough job easy.

• Pullers fit 4, 5 and 6 bolt patterns for use on most domestic and imported cars and light trucks.

• Easily removes front wheel hubs and flange type rear axles.

• Axle and Hub Pulling Adapter accepts other 5/8”-18 female threaded pulling attachments.

$137.05

TA66350

FRONT WHEEl HuB PullERSeparates the front hub fromthe axle on front wheel drive cars.• Can be used with any slide hammer having a

5/8”-18 male thread or the included 5/8”-18 x 5 1/2” long Forcing Screw.

• Hex Nut makes using with a standard slide hammer easy.

$31.49 OT6299

5 PIECE TIE ROD PICKlE FORK SEPARATOR SET• Used to remove shock linkage, tie rods, and ball

joints.• Includes: 11” lengths 1-1/8” , 1-5/8”, and 1-7/16”

Fork Spread; Sizes 16” length X 11/16” , and 15/16” Fork Spread

$121.11

TA91000 A .401 Tie Rod Tool Sleeve Breaker $20.75

TA91025 B .401 Tie Rod Separator Tool 21/32 $43.89

TA91700 B .401 Ball Joint Separator 15/16 $43.08

TA92350 B .498 Tie Rod Tool Sleeve Breaker $30.70

Made from Hardened Steel to Disengage Stubborn Parts

A

B

SL68600A

HONDA/ACuRA BAll JOINT REPAIR KITSame 1 Hour per Side in Labor Time• Removes and installs lower ball joints on the car

versus removing steering knuckle and using a shop press

• Updated design used with quick disconnect or spring type air hammers

• Works on Honda / Acura and many other makes of automobiles

$125.42

28




Shop Tools

ENGINE, CHASSIS AND BRAKE SERVICE

LS21400

LS19380LS13250

LS13600

LS14900

LS11770

LS12050LS12060

LS21600

LS36880

LS45900

LS50350

LS57340

LS52000

LS64250

LS63250LS63600

LS75500

LS63500

LS50750

LS51750

LS45750 LS20130

LS41800LS45300

LS38350 LS35400 LS35260

LS33850LS34400LS34550

LS32750LS32500LS30800

LS28100 LS28600 LS29200 LS30280

LS28500LS26000

LS24400LS26530

LS22850LS22500 LS26280

Item # Description Sale LS11770 Ford Radio Removal Tool $7.54

LS12050 Magnetic Chuck Key, 1/4 & 3/8” $19.36

LS12060 Magnetic Chuck Key, 3/8 -3/4” $23.91

LS13250 Oil Pressure Switch Skt 2-5/8 Xl $9.43

LS14900 Terminal Release Tool For GM $15.10

LS18000 Universal Cam Bearing Removal Tool $207.54

LS19380 Inductive Pencil Type Spark Tester $8.95

LS20130 Magnetic Glove Dispenser $25.52

LS21400 24” Bar Magnetic Tool Holder $36.86

LS22500 Thermostat Gasket Cleaner $23.14

LS22850 2 Piece Hose Pinchers Set $6.59

LS26000 Tamperproof Torx Set T10-T40 $18.90

LS26280 10 Piece External Master Torx Set $35.91

LS28500 Strap Filter Wrench $23.60

LS29200 3/8 Drive Impact Driver Set $38.77

LS30280 Automatic Center Punch $17.01

LS34400 Pneumatic Exhaust Pipe Stretcher $124.49

LS34550 Handy Bearing Packer $25.10

LS35260 Plastic Fastener Remover $11.32

LS35400 Upholstery Remover $8.95

LS36880 Dual Overhead Cam Lock Sprocket Holder $37.80

LS45300 Harmonic Balancer Puller for GM 3300 & 3800 $43.47

LS45750 Inner Tie Rod Removal Socket Set $89.17

LS52000 Razor Blade Scraper $11.32

LS57340 Steering Wheel Lock Plate Removal Kit $22.66

LS75500 Combustion Leak Detector $40.64

LS18000

LS40750

PARKING BRAKE CABlE REMOVER• Allows Technician to Remove Parking Brake

Cable by Compressing the Spring.

$9.43TA17380

DISC BRAKE CAlIPER BRuSH• Thin profile accesses narroy areas

• Angled Brush Head, compfrtable grip$8.73

Item #Jaw Max

Depth Price

Heaviest carriage clamp available from Wilton. Black Oxide Coating. Oscillating head, sliding cross pin handle and ductile iron frame

WL22001 2.5” 1.75” $13.09

WL22002 3” 1-7/8” $15.10

WL22003 4” 2-1/16” $21.14

WL22004 5” 2-1/2” $23.36

WL22005 6” 2-3/4” $29.89

WL22006 8” 3-1/4” $39.23

WL22007 10” 3-5/8” $46.70

WL22008 12” 3-5/8” $57.91

WL22009 14” 3-3/4” $74.73

LS17350

IMPACT PIPE STRETCHER KIT• Stretches Pipe on or off

the vehicle up to 4-1/4” • Use with an impact

wrench to quickly stretch pipes.

$237.83

OT6500

O2 SENSOR WRENCH• Flexible head design assists in the removal of

stubborn O2 sensors that are 7/8’’ in diameter, a common size to most vehicles.

$67.80LS51300

PARKING BRAKE ADJuSTING SPOON FOR FORD• Double-Ended Tool Speeds Star Wheel Adjusting on Ford F-150. Also Works on F-250/F-350

Super Duty Trucks with Dana 80 Rear Axles.$14.64

POPulAR uNDER CAR TOOlS

LS49100

GM SINGlE SPRING INSTAll/REMOVE TOOlQuickly and Easily Releases Tension on Large and

Small Single Spring Brakes on GM Vehicles.• Uses the hook to grab onto the spring while the

tool tip is used as a fulcrum to pry the spring free. Used to re-install the w spring also.

$34.02

LS17060

5” ADAPTOR FOR IMPACT PIPE STRETCH• Use with Lisle models

17350and 34400 Tailpipe Expander with the 17540 #4 Adapter.

$56.73

29




ENGINE, CHASSIS AND BRAKE SERVICE

KD2031

EXHAuST TAIl PIPE CuTTER• Exhaust and Tail Pipe Cutter Cuts pipe from 3/4”

to 3” in diameter. 15 blades effectively cut pipe so only 1/4 turn is needed to complete cut.

$53.49

OT6980

BRAKE DRuM AND ROTOR PullER• Handles brake drums, rotors, drive wheels, gears,

flywheels, and pulleys.• Spread to 12-3/4” and 5” of reach.• 7-tons of force Can be used with air tools to

reduce time and fatigue.$164.74

Item # Size Grit Price

BUBC1 1” 180 $20.00

BUBC1/2 1/2” 180 $17.09

BUBC10MM 10MM 180 $16.09

BUBC1-1/2 1-1/2” 180 $25.78

BUBC11/4 1-1/4” 180 $23.36

BUBC11/8 1-1/8” 180 $21.66

BUBC12MM 12MM 180 $16.78

BUBC13/4 1-3/4” 180 $26.91

BUBC13/8 1-3/8” 180 $23.98

BUBC14MM 14MM 180 $17.16

BUBC15/16 15/16” 180 $18.46

BUBC1-5/8 1-5/8” 180 $23.83

BUBC18MM 18MM 180 $18.08

BUBC2 2” 180 $27.91

BUBC21/2 2-1/2” 180 $32.57

BUBC21418 2-1/4” 180 $29.35

BUBC23/4 2-3/4” 180 $35.95

BUBC3 3” 180 $41.70

BUBC3/4 3/4” 180 $19.10

BUBC5/8 5/8” 180 $18.15

BUBC7/8 7/8” 180 $19.29

BUGB31/2 3-1/2” 180 $48.71

BUGB31/4 3-1/4” 180 $45.70

BUGB41/8 4-1/8” 180 $57.47

BUGB4-5/8 4-5/8” 180 $64.05

BUGBD3 3” 180 $66.27

BUGBD31/4 3-1/4” 180 $68.40

BUGBD4 4” 180 $80.57

BUGBD41/2 4-1/2” 180 $94.41

BUGBD5 5” 180 $107.43

BUGBD6 6” 120 $123.95

Item # Size Price

IP8080 Stainless $14.05

IP8081 Brass $17.31

The Flex-Hone® Tool is a perfect solution for many of your finishing, deburring and edge-bending needs.

BRAKE AND ENGINE CYlINDER HONES

TX419X

• Fits GM front wheel drive vehicles with engine torque struts used on most transverse mounted engines.

• Replaces existing torque strut (dogbone) and allows engine to be tilted forward for engine work

$60.18

LS31500

EXHAuST CuT-OFF TOOl 1-3/8”-2.5”Cuts Out-of-Round Pipes. • Four knife-edged cutting wheels cut quickly and

cleanly. • Less than 1/3 turn cuts all the way around the pipe.

$37.80

OT6703

lINE FluID STOPPER KITKit seals all types of rubber and steel lines • Includes 2 banjo style fitting stoppers, 2 steel

line stoppers, 6 line plugs, a line disconnect tool, and a long reach line pinch?off tool for hard to reach hoses.

$103.80

Cam Tools

OT6468 B 2.0L Cam Pulley Holding Tool For Probe $17.60

OT6469 C Bird, Couger, Mustang ,Mountaineer $42.55

OT6470 D 3.8, 5.0L Sensor Sync Tool Explorer , Mustang, Windstar, Mountaineer

$42.55

OT6471 E 3.0L Cam Sensor Synchronizing Tool Taurus, Sable $16.57

OT6472 F 3.0, 4.0L Sensor Synchronizing Tool Explorer, Ranger, Tarus, Windstar, Saab

$32.15

OT6473 G 3.0L Sensor Synchronizing Tool Ranger, Tarus, Windstar, Sable $48.77

OT6474 H 2.0L Cam Alignment Tool Contour, Mystique $18.64

OT6475 I 2.0L Crank Tdc Timing Pin Contour, Mystique $18.64

OT6476 J 4.6,5.4,6.8L Positioning Tool Vans, Expedition , F Series Trucks $47.74

OT6477 K 5.4, 6.8L Holding Tool Vans, Expedition , F Series Trucks, Navigator $63.32

OT6478 L 4.0L Cam Gear Holding Tool Explorer, Mountaineer $76.79

OT6479 M 4.0L Crankshaft Holding Tool Explorer, Mountaineer $94.46

OT6480 N 4.0L Cam Holding Adapter Explorer, Mountaineer $48.77

OT6481 O 4.0L Cam Holding Tool Explorer, Mountaineer $48.77

OT6482 P 4.0L Cam Gear Holding Adapter Explorer, Mountaineer $42.55

OT6483 Q 4.0L Cam Sensor Synchronizing Tool Explorer, Mountaineer $42.55

OT6485 S 4.0L Gear Bolt Skt & Extension Explorer, Mountaineer $39.41

OT6467 T 3.8L Cam Sensor Sync Tool For Ford Mustang, T Bird Cougar Windstar

$25.93

OT6489 U Ford Master Cam Tool Kit $513.09

B C D E F

L

G

H I J K

M N

O P Q

S

U

T

Clean tubes, ports, bearings and other general wire brush applications. • 6-Pc sets 8, 10, 12, 15, 17 and 19mm sizes, ¼” Hex shank

6 Piece Twisted Bore Brush Sets

ENGINE HOlDING TOOl KIT

30




BRAKE BLEEDERS AND REPAIR

PPBAKIT01

MASTER CYlINDER ADAPTOR KIT FOR BRAKE BlEEDINGEach adapter is designed to match a specific manufacturer • Color Coded Anodized Aluminum caps for easy recognition • Virtually fits all car Manufacturers

$510.77

VU12-016-1050

DX BRAKE BlEEDER AND REFIll SYSTEM• The powerful Series DX extracts fluids from

vehicle brakes quickly and safely via vacuum bleeding, plus generates slight overpressure to empty the unit’s fluid canister.

• Handle Engages Both Vacuum, and Overpressure Modes (suctioning or emptying of fluid in the canister).

$301.72

MYMV8500

SIlVERlINE ElITE AuTOMOTIVE REPAIR AND DIAGNOSTIC KITSilverline Elite Automotive Testing Kit• Applications: Vacuum & pressure related engine

performance diagnostics and tune-ups• Brake bleeding• Fluid transfer, evacuation, and sampling• Produces vacuum or pressure at the turn of a

switch• Pump Displacement 1 in3 (16cc) per stroke,

Max. Vacuum/Pressure 25 in Hg (85kPa)/30+ psi (207+ kPa)

$84.68

KD3795

DIAPHRAM POWER BRAKE PlEEDER• Automatic fluid shut-off with 4 gallon capacity tank• 12 ft. long hose for access; attached to pulling pole for convenient storage• New Industry-Standard 2100 Series Disconnect• Wheels instead of feet; greater mobility when tank is full

$427.54

PHMAXPRO205

BRAKE AND CluTCH BlEEDER HYDRAulIC HAND PuMP KITThe Maxi-Ject PRO can develop 150 psi of

injection pressure with a l5ml injection. It Makes Brake & clutch bleeding a simple one man process

• Bleed new anti-lock & diagonal brake systems, bleeds brakes quickly & efficiently

• Bleeds master cylinder in seconds• Bleeds hydraulic clutch linkage

$407.15

PHV12-205

REVERSE FluID INJECTION BRAKE & CluTCH BlEEDERThe V-12 Injector performs reverse flush, vacuum/pressure bleeding, and master cylinder bench bleeding.• Develops 125 psi with comfortable hand force.• Includes: V-12 injector, Smart-Pak Accessories

(reservoir bottle, hoses, bleeding adapters, brake fluid bottle adapters, tee fittings, plugs),

$187.06

TX803X

Full BlEEDER KIT• Professional kit includes long-lasting aluminum

adapters for US and metric fittings.• US adapters: Two 3/8-24, two 7/16-24, two 9/16-

18, two 9/16-20 and two 1/2-20.• Metric: Four M10x1.0, four M10x1.25, two

M11x1.5, two M12x1.0, two M12x1.5 and two M13x1.5.

• Plus check valves, hose, thread gauge, instructions and case.

$153.46

MYMV6840

BRAKE BlEEDER KIT

$382.69

• Includes seven (7) master cylinder adapters to connect to most American, Asian, and European manufactured cars and light trucks

• Large 1.2-gallon (5-liter) fluid capacity• Integrated manual pump adds air above the

fluid level to prevent aeration• ON/OFF and flow control valve are conveniently

located near fluid output• Utilizes push-to-connect, quick-change style

accessory connections

Item # Pics. Stye Price

MY6830 A Basic Kit with Refiller $191.02

MYMV6835 BBasic Kit with Clamp-on Refiller

$218.27

MYMV6838 CMaster Kit with Auto-refill Kit and Adaptors

$267.31

Compressed Air Operated Brake Bleeder Kits to Get the Job Done

These compressed-air-operated bleeders offer professional grade brake and clutch bleeding performance.

• Bleeds up to 2 quarts per minute, and its simple operation allows clean, quick bleeding of brake and clutch lines.

• Kits include 6’ bleed hose assembly, 4’ fluid evac hose, automatic fluid refill kit, Hanging hook, and 3 Universal bleed screw adapters

SRRBB007

77 PIECE BRAKE BlEEDER REMOVAl TOOl KIT• Reduce labor time • Avoid unnecessary and difficult drilling, tapping,

or heating • Works with both aluminum and cast iron

calipers

$101.85

A

BC

VU12-016-5050

DX 12 FluID EVACuATION SYSTEMHandles any type of non-explosive fluid evacuation.

• Powerful vacuum easily extracts fluid for any application or pressurize the canister to empty or dispense the fluid • The system includes; two probes, main suction hose, emptying hose, brake bleeder hose and brake fluid auto refiller.• Unique “throttle” design two way fluid control• Built in silencing function for lower noise level• Heavy duty construction• 13.6 quart capacity

$592.96

AUEBS301

ElECTRIC BRAKE SERVICE TOOlConnecting to the vehicle’s OBD ll socket, this tool

automatically links up with the control module. • Open and close the brake pads • Read and Clear EPB/SBC trouble Codes

$307.69

31




BRAKE BLEEDERS AND REPAIR BRAKE AND TIRE SERVICE TOOLS

OT4598

BRAKE FluID TESTER• Tester determines quality of brake fluid.• Match color of LEDs with color chart to

determine brake fluid quality after test$45.63

TA66400

• Holds steering wheel, brake pedal, accelerator or clutch pedals in desired position

$35.82

KN7326

HuB SHARK 2Updated HubShark has greater capacity to

handle larger bearings. Replace the front wheel bearings on front wheel drive vehicles without removing the steering knuckle from the vehicle - in about 20 minutes per wheel.

• Pull and press any hub or bearing on domestic and import vehicles

• Includes a thrust bearing to reduce friction between the main screw and the body

• Made in U.S.A.

$599.90

OT6575

HuB GRABBER WHEEl AND BEARING SERVICE KITA complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. • Specifically designed to apply maximum

force with minimal effort from an impact gun to also minimize service time.

• New adapters increases application coverage up to current model year. Also includes tie rod/ball joint tool and 2 Ford axle installers.

$681.46

KD3377

BRAKE RESET GAuGE• Used to set the proper

clearance between brake lining and drum prior to assembly. Inside calipers measure drum diameters and outside calipers transfer measurement to brake shoes.

• Working drum diameter range: 6-1/2” to 14-1/4”. Calibrated in 1/32” (1mm)

$58.15

OT6596

BRAKE PAD GAGE• Unique design allows for measurement

on the vehicle without the removal of any components in most cases (wheel assembly or brake caliper).

• Quick reference of brake pad condition via color code scale.

$28.00

OT6574

HEAVY DuTY HuB PullERThe Final Answer” to frozen

hubs, axle shafts, and other tough pulling applications.

• Adjustable sliding puller legs can be positioned anywhere on the puller center hub for a true universal fit on wheel hubs with 5”-8”+ bolt circles.

• Pulling plate allows for quick attachment and an even pull on the popular 5 bolt hubs with 4”-5” bolt circles.

$222.89

OT4295 $387.63 TA14800

DOuBlE FlARING TOOl KIT

$33.89TA14850

MINI TuBINGCuTTER 1/8-5/8• Cuts thin-wall steel, plastic, copper and brass

tubing from 1/8” – 5/8” O.D.$6.18

TA14825

BuBBlE (I.S.O.) FlARING TOOl KIT IN PlASTIC CASE• Works without having to

remove the brake line • For 4.75mm, 6mm, 8mm &

10mm tubing.

$38.73

• Flares 5 sizes of copper, aluminum, soft steel and brass tubing: 3/16”, 1/4”, 5/16”, 3/8” and 1/2”.

TA14860

TuBE BENDER• Bends 1/4”, 5/16” and 3/8” O.D. tubing without

without kinking or collapsing.

$14.95

Item # Sizes Price

CV154 Metric Kit (4.75mm, 5mm, 6mm in case) $42.60

CV156 Works for Bubble/ISO flares 4.75mm, 6mm,8mm tubing. $47.34

CV161 Automotive Kit (3/16” & 4.75mm in pouch) $33.14

CV164 SAE Kit (3/16”,1/4”, 5/16” in case) $41.42

CV165 Master Inline Flaring Kit $85.21

The low profile design of this tool allows techs to make flares on the vehicle without having to make tedious disassembly or reassembly.

In-Line Close Quarters Flaring Tool Kits

CV82800

12 PIECE TuBE AND FlARE KITAll in one kit features all the tools that a

technician will need to make SAE single and double flares on soft steel or copper tubing.

• Works on 3/16”, 1/4”, 5/16”, 3/8” and 1/2” tubing for single or double flares

$75.74

CV82900

DOuBlE AND BuBBlE FlARING TOOl KIT METRIC AND SAECreate single or double flares, as well as bubble

flares on soft steel and copper tubing.• Single & double flares 3/16”, 1/4”, 5/16”, 3/8”

and 1/2” tubing.• Bubble flares 4.75 mm, 6mm, 8mm and 10mm

tubing.$84.85 OT4504

BuBBlE (I.S.O.) FlARING TOOl KIT• Die sizes 4.75, 6, 8 &10mm.• Crack free bubble flares

on soft wall tubing$41.49

OT4503

DOuBlE FlARING TOOl KIT• Die Sizes 3/16-

1/2(4.8-12.7mm)

$41.49

PEDAl DEPRESSOR AND STEERING WHEEl HOlDER KIT

WHEEl STuD SERVICE KITRemoves and installs wheelstuds by pushing on the head of the stud• Remove and install 10 studs in only 10-15 minutes • Can be powered with an impact wrench • No need to remove hub from vehicle.• Works on most hubs for installationand removal.

32




SPINDLE SOCKETS, BRAKE AND TIRE SERVICE TOOLS

LS24300

SPEEDY BRAKE PAD SPREADER• Compresses Brake Pistons In Seconds.

$47.27DuAl PISTON CAlIPER BRAKE COMPRESSOR• Compresses brake pistons In secondsGY1705SN

DEEP METRIC AXlE NuT SOCKET SET• Set contains five popular spindle nut impact

socket sizes 30, 32, 34 -36mm$87.19

GY1708SN

12 POINT DEEP METRIC AXlE NuT SOCKET SET• Includes sizes 29, 30, 32, 34-36, 38 and 39mm.

$128.33

LS25750

lS25750

$54.84

GY1511TP

1/2” DRIVE 11 PIECE THIN WAll COlOR COATED luG SOCKET SETIncludes sizes 3/4’’, 13/16”, 7/8”, 15/16”, 1”, 1–1/16’’ and 17mm, 19mm,21mm, 22mm, 23mm. They feature protective (color–coded) plastic sleeves and internal plastic inserts

$121.23

LS68130

WHEEl WEIGHT TOOl• Removes, trims and installs clip-on wheel

weights. Also includes lever and offset flat tip for removing wheel covers.

$29.30

lS24300

GY2413

INNER CAP & STuD KITA unique multi-piece tool for the removal of

broken/ stripped inner cap nuts and spoke wheel studs.

• Eliminates the need to buy an entire new tool when the teeth wear... replace only the low cost rib nuts.

• Inclueds (1) Drive-On Tool, 1-1/8” , 5/8”, 3/4” Rib Nuts (not guaranteed)

$84.04

GY1504FW

1/2” DRIVE 4 PIECE “FlIP” SOCKET SETA set of four (4) thin wall ‘’flip’’ style impact

sockets that have two different hex sizes in each socket.

• 3/4’’ x 13/16’’, 19mm x 21mm, 7/8’’ x 15/16’’ 1’’ x 1-1/16’’ (not guaranteed)

$37.82

LS29100

QuICK QuAD PAD BRAKE SPREADER• Compress Disc Brake Pistons for Pad

Replacement on Single, Double & Quad Piston

$66.19

LG41670

7 PIECE AXlE NuT SOCKET SETSeven of the most popular wheel bearing locknut sockets for late-model Ford, Dodge, and Toyota trucks. • Removes and installs hex nuts on trucks.• Sizes: 55MM, 2 3/8, 2 1/2, and (Rounded: 2 1/2,

2 9/16, 2 3/8 2 3/4)$152.57

LG279

4 IN 1 BRAKE CAlIPER PRESS• Works on single and twin piston floating calipers • Centrally located ratchet evenly spreads force• Ratchet Technology gives a full 360 degree

swing so that the spreader may be placed at any position

$68.57

CV839

SIX PIECE 4WD lOCK NuT SOCKET SET• 1/2” drive sockets are for most 4WD SUV and

light truck axle locknut applications.

$102.54

AHMC560

MINI COOPER BRAKE ADAPTOR• Rear caliper brake piston tool. Comparable to

Factory tool # 346309. • Applicable to: Mini Cooper: 2007 and newer

models except the “Countryman”$33.65

CMA154

4 PC. EMERGENCY luG NuT REMOVER SOCKET SETFeatures patented reverse tapered thread to remove stripped lug nuts or lug nuts with missing keys. • Use with 1/2” drive impact wrench. Sizes: 3/4”,

13/16”, 1”, 1-1/8”$59.96

SU3930

DISC BRAKE CAlIPER TOOl SET 18 PIECE• The Master Brake

Caliper Tool Set contains caliper adapters that range from 1-3/16” to 2-1/2”

• This set also contains a caliper rotation tool with left hand threads.

SU2837

4 PIECE 1/2” DRIVE 12 POINT SPINDlE NuT SOCKET SETSunex Tools offers one of the most completeand toughest Impact Socket lines• Chrome Molybdenum Construction from the finest

steel – the best choice for strength and durability.• Set includes: 30mm, 32mm, 34mm and 36mm

$92.18

SU2835

12 POINT 8 PIECE SPINDlE AND AXlE SOCKET SET• Sizes 29-32, 34-36, 38, 39mm• Backed by Sunex Tools® industry leading

Lifetime Warranty for impact sockets$145.11

$95.27

AO78618

18 PIECE BRAKE CAlIPER SET• Complete set of adaptors for a wide range of vehicle applications• Designed for push back and wind back brake

pistons• Provides both left-handed and right-handed

thrust bolt assemblies

$66.46

KS2583

7 PIECE STuD THREAD RESTORING KITRepair or renew damaged threads on wheel studs.• Thread restorer dies are made from high-

tempered steel for strength and durability. • Sizes include: 7/16”-20, 1/2”-20, 9/16”-18, M12-

1.25, M12-1.50, M12-1.75, M14-1.50$39.93

KS755

6 PIECE WHEEl STuD INSTAllER KITSIncludes sizes 1/2”-20, 9/16”-18,12mm-1.75, 14mm-1.50, spacer and washer. • Components will install wheel studs on almost

all foreign and domestic light trucks and SUVs.$74.66

33




MEASURING,BRAKE AND TIRE SERVICE TOOLS

FOW72-646-400

CYLINDER DIAL BORE GAGE 1.4” TO 6”• Range: 1.4”-6”, Carbide anvils, Graduation:

.0005”• Easily adjustable, Self-centering• Insulated grip, Chrome plated handle• Includes extension holder and fitted case.

$152.31

FOW72-229-220

METRIC OUTSIDE MICROMETER SET• 0-100mm Range, .01mm graduations.• Measuring faces are carbide tipped.Friction/

ratchet style thimbles.• Insulated frames, Positive lever-locking clamp.• Sizes over 25mm include standards.Includes

wrench and fitted case.

$151.10

FOW72-480-05018’ STRAIGHT EDGE

$78.57


$90.66


$104.40

FOW72-641-300

Flex-Arm Mag Base features:• 85 lb. pull, Holds rigidly in any position desired. V-

base for placing on round surfaces. On-Off lever release magnet

Indicator features:• 1” travel, AGD group 2, 2-1/4” dial diameter,

Reading: .001”, Continuous reading: 0-100, Revolution counter, Tolerance indicators

$84.62

FOW74-225-555

DEPTH GAGE• Spring-loaded and hold measurement button

for ease-of-use.• Super-large display, Range: 0-6”/150mm• Resolution: .0005”/.01mm (Fractions in 1/64”

increments).• Supplied in shop-hardened case.

$53.19

FOW72-470-006

TELESCOPING GAGE SET UP TO 6”• Double action rigid handle with self

centering feature for quick checking of inside measurements.

• Constant spring tension for uniform feel.

$102.64FOW74-646-401

ELECTRONIC BORE GAGE TO 6”Bore Gage Features:• Carbide anvils. Range: 1.4”-6”/35mm-150mm• Easily adjustable. Insulated grip. Self-

centering. Includes extension holder.• Dual reading inch/metric electronic

indicator. Bar graph and numeric digital display. Resolution: .00005”/.001mm. Preset with recall. ABS/INC measurement.

$320.33

HARDENED STRAIGHT EDGES

FOW72-585-150

ARTICULATING MAG BASE & INDICATOR COMBO SET• Adjust in almost unlimited ways.Fine adjust, 85 lb. pull, Articulating Mag Base• V-slot on base for mounting on rounded

surfaces. Can be set up in almost unlimited positions! AGD Indicator

• 1” travel. Continuous reading: 0-100. AGD group 2, 2-1/4” dial diameter. Revolution counter Tolerance markers, Lug back mount, Carbide point

$103.96

FOW72-585-500

CHROME FLEX ARM MAG BASE INDICATOR SET• AGD Group 2, Dial diameter: 2-1/4”, Travel: 1”, Reading: .001”, Continuous reading: .100”, Carbide tipped point• Included Magnetic Indicator Back for mounting

to most metal surfaces!Flex Arm Mag Base features:• Corrosion resistant chrome plated flex arm.,

85 lb. pull magnet, Holds rigidly in almost any position., V-base for mounting on rounded surfaces.

Magnetic Indicator Back features:• Use for positioning the indicator on most metal

surfaces. Protective coating$94.29

FOW72-646-300

DELUXE CYLINDER BORE GAGE• Range 2”-6” diameter, .0005”

graduations, 6” depth$114.84

FLEX ARM BASE & WHITE FACE DIAL INDICATOR COMBO

FOW74-870-001

DIGITAL MICROMETER• Jet black, grey enamel finish. Large LCD display.• Resolution .00005”/.001mm, range 0-1”/0-

25mm• Direct RS 232 output. Carbide measuring faces.• Absolute and incremental modes. Ratchet

thimble.• Includes shop hardened case.FREE! Ball Attachment

$84.62

CE6470

UNIVERSAL PINION DEPTH SETTING GAUGE SET• Works on all cars and light duty trucks. • Allows quick and accurate pinion depth set up

for all after-market rear ends. • Also works on OEM gear sets with pre-

measurements of pinion depth. • Incorporates a swing arm assembly and

indicator holder. • Range: 0-3”, Graduation: .001”, Reading: 0-100Item Weight: 4.9 Pounds. Height: 12.60 inchesLength: 8.90 inches. Width: 3.50 inches

$799.44

FOW73-646-000

BORE GAGE SETTING MASTER & 36 PIECE GAGE BLOCk SET

Use the Setting Master Kit for accurately setting any bore gage up to 6” in diameter to an accuracy of .0001”!• Setting Device, with base anvil: 2.750” x .80”

& adjustable anvil 2.375” x .375” (two each)• Internal capacity: 6”, Depth capacity: 1”,

Centralizer capacity width: 2.625”• Quick-release holder for fast adjustment.• Economy Gage Block Set• Tolerances to ± .00005”. Gage not included• All in a high quality aluminum case!

$278.02

FOW73-646-010

METRIC BORE GAGE SETTING MASTER kIT• 33 Piece set, covers metric up to 300mm

$357.14

34




BRAKE, TIRE AND MEASURING TOOLS

FOW72-229-214

OUTSIDE MICROMETER SET 0-4”• .0001” graduations.• Measuring faces are carbide tipped.• Accuracy: ± .0001” for 0—1” and 1—2” sizes.• Friction/ratchet style thimbles. Positive lever-

locking clamp.• Sizes over 1” include standards. Includes wrench

and fitted case$132.97

• Checks ball joint wear and disc rotor runout.

• Checks tire and wheel runout, gear backlash, valve guide wear, etc.

• Meets state inspection requirements.

• Indicator features 0-1” travel, and .001” graduations.; Inch/Metric 1”/25mm, .001”/.01mm grad.

• Includes shop-hardened case.

$91.87

FOW72-522-101

MAG BASE AND DIAL INDICATOR SET• Includes 1” indicator

and mag base, plus rods, swivel clamp and wooden case.

• The 2” diameter .001” indicator features: satin chrome finish, tolerance hands, lug back and revolution counter.

• The 6” high mag base features a 1.5” x 1.5” x 1.75” 50 lb. pull base and a 4.5” long sidearm. All exposed metal is finished in anodized black for corrosion resistance.

$80.22

FOW74-101-150-2

ELECTRONIC CALIPER• Range: 0-6”/150mm, Resolution: .0005”/.01mm,

Stainless steel frame.• Direct inch/metric conversion. 4 way measuring.

Complete in case.$42.31

FOW72-520-757

DISC AND ROTOR/BALL JOINT GAGE

FOW74-101-777

ELECTRONIC DRUM AND ROTOR MEASURING kIT• Measures disc brakes and up to 12” on brake drums.• When measuring brake drums only, add 8” to

measurement— allows for long cone & jaw widths. For use with 6” & 8” calipers 0-6” Caliper features:

• Resolution: .0005”/.01mm. Direct inch/metric conversion. Absolute/incremental measurement. Furnished in shop-hardened case.

$90.66

FOW74-150-002

ROTOCAL ELECTRONIC ROTOR GAGE WITH 6” EXTENDED JAW DEPTH• Range: 5.5”/140mm, Reads in inch, metric, and

fractions• Direct inch/metric/fraction conversion• Resolution: .0005”/.01mm (fractions in 1/64”

increments)• Water resistant to IP54 standards.

$79.12

FOW74-150-020

EZ-DRUM ELECTRONIC BRAkE DRUM GAGE• 4” to 20”/100 to 500mm Capacity• 4” drum preset, Zero set and Hold function• Preset depth at 1” and 1.5”• Beam has vernier scale to double check

reading.• Can be used to check some disc

measurements.$197.80

FOW74-100-112-1

12” ELECTRONIC CERAMIC CALIPER• Measuring Range 12” (300mm)• Resolution (Decimal Inch): .0005”, Accuracy

(in): +or-.002$163.19

FOW74-150-004

ROTOCAL ELECTRONIC ROTOR GAGE WITH TWIN CONICAL ANVILS• Range: 5.5”/140mm• Resolution: .0005”/.01mm (fractions in 1/64”

increments)• Water resistant to IP54 standards.• Conical anvils measure scored surfaces. 3.5”

jaw depth for larger rotors

$79.12

FOW74-101-175

ELECTRONIC CALIPER POLY-CAL ENGLISH/METRIC/FRACTION• Range 6”/150mm• Polycarbonate Frame.Large easy-to-read display.• Direct inch/metric conversion. 4 way measuring.

• Accuracy +/-.008”$22.97

FOW72-585-155

X-PROOF WATER RESISTENT INDICATOR SET• Fine adjustment Base dimensions:

2” x 2-11/32” x 1-13/16”• Mounts test indicators with 1/4” post.• 85 lb. pull. On-Off lever release magnet.• V-base for placing on round surfaces.• Travel: 1”. Reading: .001”

$80.22

SM36000

MEASURE N STICk• Hands free measuring • Continuously monitor

your pull. • Measure without an assistant. • For Body-men, Insurance Adjusters, Fabricators.

$62.42

CE3D103

ROTOR RUN-OUT SET• Range 0-1”, .001” Graduations• Locking pliers clamp to any convenient object

$89.27

Item # Desc. Capacity Sale

Digital Calipers with Inside, Outside, Depth and Step Measurements

CE3C301 Steel Body 0-6”/0-150mm $30.04

CE3C351 Composite Body

0-6”/0-150mm $17.11

CE3M335

WHEELS ON ROTOR GAUGEMeasure rotors without removing the wheel to

pre qualify brake jobs • Easy access between dust shieid and rotor • Digital read-out with push button inch/metric

conversion • Range is 0-3.50”/0-88mm • Graduations are .001”/.01mm

$106.33

CE3M430

DIGITAL ROTOR GAGEEasy to read digitaldisplay withinch/metric conversion• 0-5.50”/0-140mm Range• Measure brake rotors and ball joints• Pointed anvil and 3.50” long arms to inspect

rotors$67.93

35




BRAKE AND TIRE SERVICE TOOLS

Popular Carbide Brake Lathe Bits

Heavy Duty Tubing Benders

Item # Brand Fits Price

AM40410 Ammco FMC $47.34

AM40415 Ammco Kwik $72.37

AM40420 Ammco Hunter $34.79

AM40430 Ammco Perfor. $26.77

AM40435 Ammco Accuturn $56.51

AM40610 Ammco Round $62.33

AM6914-10 Ammco Ammco $27.82

AM6918-6 Ammco Am/Pos $42.22

SR060-10 Ammco Accuturn $41.42

SR062-10 Shark Ammco $18.82

SR069-10 Shark ProCut $52.07

SR407-10 Shark FMC $41.42

SR802-10 Shark Kwik/Snap/Pos $52.66

Item # Sizes Price

OT4403 3/16,1/4” $44.35

OT4404 5/16,3/8” $59.14

Item # Size Length Price

SRRBR-EZ100 3/16” 25’ $42.31

SRRBR-EZ100-100 3/16” 100’ $164.96

SRRBR-EZ100-50 3/16” 50’ $87.98

SRRBR-EZ200 1/4” 25’ $59.38

SRRBR-EZ200-100 1/4” 100’ $222.71

SRRBR-EZ200-50 1/4” 50’ $111.37

SRRBR-EZ300 5/16” 25’ $83.55

SRRBR-EZ400 5/16” 25’ $95.02

Item # Size Price

SRRBR-EZ14 1/4” $100.02

SRRBR-EZ316 3/16” $144.96

SRRBR-EZ31650 3/16” Bonus Coil $144.96

OT4750

14” TIRE VALVE INSTALLER/REMOVER TOOL• Stepped rubber sleeve• Removes and installs snap-in style tire valves.

$24.86

OT4770

TIRE SPOON• This 13” curved tip tire spoon is strong yet

comfortable to use with the form fit hand grip.

$23.82

LG1410

TIRE VALVE PULLER TOOL• Simplify inserting any tubeless tire valve• Handle is used as a lever to pull tire valve into

rim hole$24.68

LG401

TPMS DEFLATORS• Sockets are clearly marked for easy

identification so the wheels can return to their original position without resetting the TPMS.

$26.77

SRRTS14316

TUBE STRAIGHTENING AND BENDING PLIER• Straighten or bend lines on or off the car• Works great on Easy Bend alloy, steel, stainless

steel, and poly-coated materials

$56.90

LS44150

TIGHT ACCESS COPPER BENDING PLIERS• Bends 3/16” Brake Lines Without Kinking or

Flattening, Especially in Tight Spots. Bends all types of 3/16” OD tubing. Unique head design bends tubing without collapsing the tube. Won’t mark tube surface.

$32.13

LS44070

1/4” TUBING BENDING PLIERS• Bends 1/4” Brake Lines Without Kinking or

Flattening, Especially in Tight Spots. Bends all types of 1/4” OD tubing

$34.51

VT989

BRAkE SPRING PLIER• Longer and slightly wider with stronger tips• Holds the spring better without leaving a deep

cutting mark.

$31.85

Bends and Flares to Perfection with Ease!• This product does not corrode in harsh environments and requires no special bending tools.

Quick release handle to easily remove tubing from bender.• Sturdy steel construction, can bend up to 180+ degrees.

These kits conform to SAE hydraulic brake tubing specs and are pressure rated up to 3,000 PSI. This prod-uct does not corrode in harsh environments and requires no spe-cial bending tools.

High Grade Flexible Copper Brake Line Tubing

41 Piece Brake Line Repair kits

CV82700

METRIC BUBBLE FLARING TOOL kITForms Bubble Flares in soft steel and copper tubing.• Flares metric Hydraulic brake lines used

on Japanese, European, and domestic automobiles.

• Works on 4.75mm, 6mm, 8mm, 10mm Tubing.

$78.56

OT5744

TIRE VALVE DEFLATORSEvacuates air from the tire without removing the valve core.• Tire location is marked on the color coded

deflators so TPMS sensors can be replaced to the original location

$35.47

CV36700

TWO-IN-ONE S-CAM BRAkE TOOL• More efficient method for changing brake shoes

on an S-Cam drum brake assemblies.

$28.40

36




BRAKE AND TIRE SERVICE TOOLS

TA65150

TIRE VALVE CORE TOOL• Removes and installs tire valve cores.• Shaft extends 2” beyond handle.• 5 1/2” overall length.

$2.81

JS96090A

SPARE TIRE REMOVAL BARS• Allows anyone to quickly remove

difficult to reach spare tires• Applications include many trucks

and SUV’s where spare tire is located under the vehicle

$103.82

TA65140

TIRE TREAD DEPTH GAGE• Sliding gage measure in inches and millimeters

$4.52

AL19822

TIRE TEST DUNk TANk• Heavy duty plastic tire and tube test tank. 31” x 12” x 12”.

$67.80

Item # Style Lenth Price

MIS-690-12 Standard 12” $16.57

MIS-693-12 Straight Foot 12” $19.88

DUAL HEAD AIR CHUCkSNo more frustration with air chucks too short to reach inner dual wheel tire valves.

AO3018

TPMS DIGITAL TIRE PRESSURE INFLATOR WITH QUICk CHUCk• Easy Change Chuck System 1 Button Operation, Auto shut-off for increased battery life• LCD Back Light Allows accurate reading of

tire pressure, assisting with TPMS (Tire Pressure Monitoring Systems)

• Two position lever. 1st position deflates, 2nd position inflatesn system

PRDT150-38CV

DIGITAL DUALSTRAIGHT HEAD RV & TRUCk GAGE

• Easy to read LCD Accurate to +/- 1.0%

$37.36

PRDT150-33CV

DIGITAL DUAL HEAD TIRE CHECkING GAGE

$34.07

AF101D

TIRE INFLATORGAGE BAYONET STYLE• 12” Hose with swivel dual chuck• Tapered end fits wheel cover holes on cars

and light trucks$49.25MI506S

DUAL HEAD TIRE INFLATOR• Window Style lens Reads tire pressures

accurately from 10-120 lbs

$49.01

TA65100

TIRE INFLATOR WITH GAGE• Easy to read pop up gage measures from 10

to 120 PSI in 2 PSI increments

$32.92

JS97926 $13.05

TPMS DIGITAL TIRE PRESSURE GAUGE• 3 – 99 PSI. Accuracy: +/- 1 PSI• Auto delay shut-off function• Aluminum housing with rubber nose and tail for

added protection

$101.93

AF135

TIRE INFLATOR GAGE WITH 12” WHIP HOSE• Easy to read dial is calibrated 0 to 160 PSI.

Unit is protected with a heavy rubber cushion “bumper.” The tapered chuck and swivel dual foot make getting into tight spots easy. A must for racing tires and truck fleets.

$83.17TA65120

TIRE INFLATOR GAGE WITH VIEW WINDOW• Easy to read gage is calibrated from 10 - 120 PSI in 2 lb. increments. Three function lever:

$53.80

AO3081

DIAL STYLE TIRE INFLATOR• Aluminum die-casting unit covered with rubber sleeve • Clear and easy to read 3 in 1 function: inflate,

deflate and measure tire pressure• Two position in flate/deflate level• 80mm pressure gauge (0-12 Bar/174Psi)

$65.23

TA65130

TRUCk TIRE INFLATOR WITH DIAL GAUGE• Extra long reach 14” dual head chuck with

internal lock on threads • Easy to read, dual calibrated scales (0 - 160 PSI

and 0 - 1100 kPa)• Protective rubber, corrosion resistant brass

pressure relief valve

$58.11

TA65110

DUAL HEAD TIRE INFLATOR DIAL GAGE• Easy to read, dual calibrated scales 0-120 PSIand 0-830 kPa, 6” Dual head chuck• Protective rubber boot surrounds dial gage

$53.27

FOW74-225-500

DIGITAL TIRE DEPTH TREAD GAGE• Reads in inch, metric and fractions!• Spring-loaded & hold measurement button• Super-large display, Range: 1”/25mm• Resolution: .0005”/.01mm, fractions in 1/64” increments.

$19.53

LS18810

VALVE CORE TORQUE TOOL• Set to 4 inch pounds, to prevent under and over

torqueing the valve core.

$22.66

LS14100

VALVE CORE TOOL• Reversible driver fits both large and small valve cores. • Tool handle will access inside dual wheels.

$14.44

37




TIRE REPAIR

Item # Description Sale Price

GP11-311Euro Tire Square Universal Tire Patches Medium Square 2 1/4”. Premium blue vulcanizing gum with white backing works with radial or bias ply tire. 50 per Box.

$36.67

GP11-322 USA Style Universal Medium Round - 2 1/4” Designed for chemical vulcanization. Black vulcanizing gum, blue poly backing. 25 Per Box $17.62

GP11-325USA Style Universal Medium oval- 1-7/8 x 3-7/8 in. Designed for chemical vulcanization. Black vulcanizing gum, blue poly backing. 25 Per box

$20.82

GP12-213 Arrow Head 5/16” Orange Vulcanizing Insert (25 Per Box) $16.15

GP12-214 Arrow Head 7/16” Orange Vulcanizing Insert (15 Per box) $16.15

GP12-361R 4” Flat Brown String, 50 Pieces $13.61

GP14-008 236ML Chemical Vulcanizing Cement for chemical or heat vulcanization. $15.56

GP14-101 32 oz Bead Sealer for use with Tire inflation machines $15.13

GP14-303 Carbide Power Rasp Tool $24.77

GP14-305 Flexible Skiving Knife $16.36

GP14-310 Power Awl $9.87

GP14-314 3/16” x 1-1/2” Wood Handle Sticher $12.87

GP14-314W 1-1/2” x 1-1/2” Wood Handle Sticher $31.13

GP14-315H Hoe Style Inner Liner Scraper $12.28

GP14-317 Split Eye Tire Needle Insert Tool Chrome T-Handle $16.51

GP14-317P Spiral Probe Chrome T-Handle Tire Reaming Tool $16.51

GP14-320 2-1/2” Carbide Tire Buffing Wheel $6.28

GP14-552 Tire Yellow Marking Crayon $10.90

Item # Description Sale Price

Popular Safety Seal Tire Repair Products

NSTS Heavy Duty Spriral Reamer Tool for Trucks $21.78

NSPS Tire Reamer T Handle Tool with Metal Handle $21.18

NSTA Tire Repair String Inserting Tool Metal T Handle $21.18

NSRA 60 Pack of Replacement Safety Seal Tire Repair Strings $22.49

GP11-311 GP11-322 GP11-325 GP12-213 GP12-214

GP12-361R GP14-303 GP14-305

GP14-314 GP14-314W GP14-315H GP14-317 GP14-317P GP14-320

GP14-008 GP14-101 GP14-310

Professional Tire Repair Products For Use In High Volume Shops Or Towing And Recovery Operations

SQUARE ROUND OVAL

GP14-701

EURO-PASTE TIRE COMPOUND• 11Lb White X-Tra Seal Euro-Paste Mounting & demounting compounds to prevent damage to tire bead

$43.46

GP14-753PM

TIRE LUBRICATING FLUID• 1 Gallon Tire Mounting or Demounting

Lubricant to prevent damage to tire bead$14.49

GP12-221

FIBRE-SEAL INSERT kITGet in the Know for basic tire patching repair. This kit is a fix all for customers that need a fast plug or patch.

$78.92

GP12-361

TOTE TIRE REPAIR kITTire Repair for the Do it yourself or Pro• Includes; 50 pieces of 4” fat brown string. 1-spiral,

1-open eye needle, 1-jar plug lubricant, 1-razor blade knife, Easy to follow instructions for home or professional use

$35.95

GP12-210

MUSHROOM STYLE TIRE PLUG kIT• Includes: 2 Boxes 12-213 (5/16 Orange

vulcanizing insert, 25 per box), 1 Box 12-214 (7/16 Orange vulcanizing insert, 25 per box), 1 Can of cemment, and probe tool

$126.28

NSKAP30

AUTO AND LIGHT TRUCk REPAIR kIT• Kit contains: 30 - 4” strings, metal insertion tool,

extra insertion needle, metal Thandle spiral probe, lube, instructions

$56.59

NSKAP

PROFESSIONAL TIRE REPAIR kIT METAL T TOOLS & 60 STRINGS• The Deluxe Kit contains 60 - 4 inch (10cm)

repairs• Metal T-Handle Insertion Tool• Extra Insertion Needle. Metal T-Handle Spiral

Probe. Lube Instructions. MADE IN THE USA$60.99

QRP4S

4 PIECE LINE QUICk RELEASE PLIERS SET• Easily fits in tight locations using verticle or angle styles• Use with: Gas filters, Vacuum lines,

Push lock fittings, Air & Hydraulics, PVC valves, Wiper lines, Water lines, and steering lines on cars and trucks.

$185.93

DIRECT SOURCE

38




TIRE CHANGING

COR601

KN35926

IMPACT TIRE BEAD BREAkER• Bead breaker loosens beads with bead-breaking foot and ram bar, but

never cuts the bead of the tire. The wedge foot is forced between the bead and rim flange.

• Exclusive spring action design to reduce user fatigue. 50” lenght, 80” fully extended.

$232.18

KN30609

INNER DUAL WHEEL PORk CHOP• 1-1/2” Wrench holds outer cap nut on dual

wheels while the inner nut is turned. Lip fits in hole to secure wrench in place. Sizes offered fit standard and metric cap nuts

$21.99KN35429

32” DUCk BILL BEAD BREAkING HAMMER• Fiberglass handle with curved

head hammer.$123.24

KN33195

19.5” TIRE MOUNT/DEMOUNT SET• (2) Two Nineteen-Five Bars (# 33199) for

mounting and demounting tires, measuring 38-inches each in length and only 3.5-pounds in weight

• (1) One patent-pending Bead Holder (# 33196) for 19.5” aluminum wheels, measuring 7-½ -inches in length

• (1) One Solid Brass Bead Holder (# 31710) for steel wheels

• (1) One patented Leather Aluminum Wheel Protector pad (# 31810), which protects rims from marring and scratching

$173.09

KN35440

BLUE COBRA TRUCk TIRE DEMOUNT TOOLFast and easy, the 54” Blue Cobra truck tire demounting tool is strong but economical and offers a golden value for tire changing• Quickly demount nearly any 20”, 22.5” and 24.5”

tube-type and tubeless truck tires, up to a 13” wide wheel

• Allows demounting of the tire without lifting the entire wheel and tire off the ground

• Aluminum bead support to grab the top bead of Super Single and Super Wide tires

$367.18

KN35924Small Impact Bead Breaker Slide Hammer

$154.77

Allows demounting of the tire without lifting the entire wheel and tire off the ground

KN31444

• Used on Auto, ATV, and Truck Tires• Designed for use on tires up to 24-1/2”diameter• ASME certified 5-gallon tank

$299.27

AIR BLASTER BEAD SEATING TOOL

COR120

SEMI AUTOMATIC SWING ARM TIRE MACHINESturdy four clamp design

with dual power clamping cylinders and plastic wheel protectors

• Clamp capacity 10-20” from outside, 12-22” from inside.

• Rim width capacity to 11’ Clamping: 10-20” from outside, 12-22” from inside. Max. rim width: 11” , Max: tire diameter: 38”

• Built-in inflation jets in the clamps for efficient bead seating . Powerful dual action bead breaker $2,692.31

Economical Tire Repair Solutions

LOW VOLUME WHEEL BALANCERA full functioned computerized digital wheel

balancer for light duty applications. • Digital display with LED mode indicators• 5 Alu/Alu P modes, static and dynamic modes

available

$2,692.31

SHIPS BY TRUCK

SHIPS BY TRUCK

TX498

BMW/MINI WHEEL STUD PILOT PINS• M14 X 1.25 thread, Fits: BMW 7 Series, 6 Series, X3,

X5, & X6 2009?Present Mini Cooper • Allows the technician to hang wheel & tire

without having to balance the wheel on the lip of the hub.

$36.92

CM4815

WHEEL STUD CLEANING BRUSH SETFor quick cleaning debris and rust from wheel studs and lug nuts when changing tires. • Two sizes to service different diameter studs. • Removable cap for using male brush end to

clean lug nuts.

$20.48

KN35847

BEAD EZE TIRE AND RIM LUBRICATOR• Use to lubricate tire for

easier bead seating.$19.12

KN30511

TIRE LUBE BRUSH• Used for brushing lubes on to the tire to make

rim mounting easier$11.83

KN35460

32” BEAD BREAkING WEDGE WITH POLYMER HANDLE• Hump Design prevents tool from wedging

between rim and bead. • Breaks the bead with little or no prying.

$117.78

KN34549

DUAL WHEEL SEPARATORInnovative “One-piece” Pusher won’t fall apart during use• Pusher is ball bearing-driven for

near zero turning resistance• Includes two pullers to cover large and small

dual wheel applications• Use with air impact wrench

$231.14

KN31431

UTILITY TIRE PNEUMATIC BEAD EXPANDER• Features an external pressure quick release

valve and is covered by a tough, abrasion-resistant nylon sock. .

• For 22” to 34” diameter small utility tires.$140.88

KN34649

7/8” SUPER DUTY TUBELESS TRUCk TIRE IRON• 52” length provides up to 40% greater leverage • Angled tip easily slips between bead and rim

and helps to prevent cutting or ripping the bead or sidewall.

$103.73

Item # Color Price

SH63606 Purple $3.46

SH63613 White $3.46

Used for marking spare parts and glass

Uni-Paint Parts Markers

39




TIRE AND LUBE

PL55161

RYTON LEVER BARREL PUMP• Polypropylene housing, stainless steel rod

with Viton seals. Pumps all types of fluids• Fits 5-55 Gallon Drums

$84.37

PL55150

RYTON ROTARY PUMP FOR ACIDIC FLUIDS OR OILS• Will pump acids, alkalines, gas, diesel, machine

oil, water, alcohol, thinners and petroleum based products. Fits 5-55 Gallon Drums

$205.97

PL55017

ECONOMY BARREL PUMP• Die cast head with garden hose threads

$34.35

PL55123

HEAVY DUTY PETROLEUM FLUID BARREL PUMP• Two–piece telescoping suction tube fits 30 –55

gallon drums, delivers 10 oz per stroke

$43.65

PL55303

ECONOMY ROTARY BARREL PUMP• Rugged cast iron pump housing

$79.56

PL55017 PL55123 PL55161 PL55150

TORQUE SOCKETS

Item # DescriptionLT1500-B 21mm - 80 Ft/Lbs., 110 N.M Orange

LT1500-BB 21MM 150 Ft/Lbs. Truck & Van Turquoise

LT1500C 3/4”/19mm - 100 Ft/Lbs., 135 N.M. Grey

LT1500-DD 21MM 100 Ft/Lbs. Chrysler/ Dodge Sky Blue

LT1500-EE 22MM 140 Ft/Lbs. Truck/SUV Safety Purple

LT1500-GG 1 1/16” 80 Ft/Lbs. Land Rover Beige

LT1500-I 7/8” 120 Ft/Lbs. Chevy/GMC White

LT1500-J 1” 140 Ft/Lbs. Light Truck and Van Tan

LT1500-LL 22MM 175 Ft/Lbs. Truck/SUV Bubble Gum

LT1500-NN 19MM 90 Ft/Lbs. Gold

LT1500-OO 13/16” 75 Ft/Lbs. Neon Green

LT1500-Q 7/8” 140 Ft/Lbs. Light Truck & Van Aqua

LT1500-QQ 22MM 95 Ft/Lbs. Honda,Acura, Land Rover Salmon

LT1500-R 17MM 70 Ft/Lbs.

LT1500-S 19MM 55 Ft/Lbs Light Blue

LT1500-V 1-1/6” 140 Ft/Lbs. Truck & Van Maroon

LT1500-XX 13/16” 160 Ft/Lbs. Truck/SUV Truck Socket Vanilla

LT1500-Y 7/8” 100 Ft/Lbs. Navy Blue

$30.81

PL55303

LN1385

ROTORY PUMP NON CORROSIVE FLUIDSUse for Oils, diesel, kerosene, coolant,

and non-corrosive materials

$187.69

LN1387

FUEL TYPE ROTARY PUMPUse for Gasoline, Oils, mediumviscosity petroleum based fluids,diesel, kerosene, coolant, and non-corrosive

materials. Fully serviceable and FM Approved.• Includes Flame Arrestor and Anti-Siphoning

Vacuum Break, Heavy-duty 8’ x 3/4” anti-static hose with non-sparking aluminum nozzle with hanger

$291.28

Lincoln Rotary Pumps Feature Graphite Three-Vane Design for exceptionally smooth fluid flow for no-splash fills. Use in Agriculture, Heavy Equipment, Construction, Trucking/Transport, Automotive, and Industrial

• High-tolerance micro-finished bore & vanes provide outstanding pump life• Self Priming / Outstanding vacuum• 10 Gal/Min at 120 RPM low viscous fluids, 7 Gal/Min at 80 RPM motor oil

KN30171

13 PIECE DELUXE LUG NUT WHEEL LOCk REMOVAL SETEasily removes most lug nuts and wheel locks on domestic and importpassenger vehicles and light trucks. • Use with hand driver or impact wrench. • Set includes 11 sockets, extension and extractor

punch in plastic storage case.$140.78

LT1470

7 PIECE 1/2” DRIVE WHEEL TORQUE EXTENSION SET• Does the work of 16 regular torque sockets.• Each kit includes a color wall chart

$210.44

Item # Pics. Fits Tubes Fluids Price

TA17500 A 5, 6 Thinner $24.77

TA17550 B 15, 30, 55 Non water base $36.79

TA17560 C 15, 55 Non water base $34.86

Item # Pics. Size Fluids Stroke Price

LN1340 A 16 to 55 Non water base 14 $59.83

LNG400 B 25-50lb Gear Oil NA $42.20

LNG401 C 5 to 30 Petro Based 10 $39.56

LNG410 D 16 to 55Water Based/Light Corrosive

NA $37.56

Use with Light Viscosity Non Corrosive Fluids and Lubricants

Tool Aid Manual Transfer Pumps

Use with Non Corrosive Fluids.

Lincoln Economy Fluid Pumps

DC

C

B B

A

A

TA19600

TIRE WHEEL STEP• Mount on tires from 14” thru 20”• Aids in reaching dificult areas by use of

elevating the tech

$96.88

LT1593

9 PIECE WHEEL TORQUE MASTER kIT• Tightens Lugnuts To Correct Torque First Time,

Every Time On Most Domestic/Import Cars & Light Trucks. Helps Avoid Over-Torquing & Prevents Wheel And Brake Damage

$245.69

PL55-155

PRO ROTOARY BARREL PUMP• Ideal for DEF, water base, acidic,

gas, diesel, petroleum and other caustic shop fluids of low viscosity

• Ryton construction, teflon seals• 100 Turns equals 7 gallons

output$164.94

40




GREASE AND LUBE

• Two-speed transmission gets the job

done quickly – 300% greater grease flow(up to 9 oz. perminute) –

35%more operating pressure than any other “cordless”gun unclogs stuck fittings – A patented stroke indicator button for grease flow measurement

• Best grease output in cold temperature operation (down to 10°F). Overload protection.

PMW5215

70 PIECE GREASE FITTING ASST.• Contains 9 popular

sizes in SAE and Metric Sizes • Convenient re-

sealable plastic case$13.02

LN740

HIGH PRESSUREGREASE CONTROL VALVE• Use with power operated

Lubriguns• Includes 6” extension tube

and hydraulic coupler–withstands 10,000 p.s.i.

$145.13

LN1162

FULLY AUTOMATIC AIR GREASE GUN• Fully automatic, continuous operation, Variable-

speed trigger• 30” high-pressure hose with coupler and

attachment clip• Includes a combination filler nipple and bleeder

valve• Pump Ratio: 40:1 at 150 psi• Max. Grease Pressure: 6,000 psi (414 bar)• Air Pressure Range: 40 - 150 psi (2.8 - 10.3 bar)

$102.89

LN6917

50:1 GREASE PUMP• Includes #740 Grease

Control Valve and #81387 Universal Swivel, and four wheel band dolly

• A standard metal follower plate with a flexible wiper edge cleans the drum and helps prime the pump to use more of the available grease. A heavy duty ¼” Air Coupler and Nipple are also included.

• Fits on a 120lb factory grease container

$875.73

IP7863

GREASE JOINT REJUVENATOR MASTER PROFESSIONAL MODEL• Opens clogged grease fittings & joints• Cleans & replenishes old & dirty grease fittings• Loosens dried grease in joints

$80.31

50:1 Double Acting Grease

Pump

LN1844 $337.67

Lincoln: The “Originator of theBattery-Operated Grease Guns

18 Volt Cordless Grease Gun kit

IP7862

PROFESIONAL GREASE JOINT REJUVENATOROpens clogged grease fittings & joints• Cleans and replenishes old and dirty grease

fittings• Loosens dried grease in joints• Cleans ways and stays in milling machines and lathes• Lubricates bearings on farm, lawn &

construction equipment$57.35

TZ45215

70 PIECE GREASE FITTING ASSORTMENT• Top quality components packed in an easy pick package• Contains the most popular sizes

$14.44

Item # Pic Part Info Fits Price

LN1224 A Hose 24” All $36.18

LN1230 A Hose 30” All $38.24

LN1236 A Hose 36” All $45.69

LN1401 B Battery HD 14 Volt $100.43

LN1410 C Charger AC 120v 14/18 Volt $59.55

LN1415A D Charger 12V Car 14/18 Volt $59.29

LN1801 E Battery HD 1840 Series $104.70

LN1861 Battery Li-Ion 1860’s $168.21

LN1850 Charger Li-Ion 1860’s $85.09

Item # Fits Price

LN1862 18-Volt Lithium Ion Kit $413.79

LN1864 18-Volt Lithium Ion 2 Battery Kit $522.59

E

C

B

A

Cordless Grease Gun Parts for Lincoln Series Grease Guns

Power Luber Accessories

These Kits feature the latest digital technology • LCD flow meter displays grease output, cartridge level, and battery charge level. It also prevents over lubrication and wasted grease• Two-speed design delivers outstanding flow and pressure• LED lights up fittings when under equipment or in shaded areas• 36” long-reach hose with spring guard• Ergonomically designed and balanced for comfort• One hour fast charger rapidly charges the 3.0 amp batteries.

LCD Flow Meter

2 Speed Flow

18v Lithium

18 V High-Amperage Lithium Ion Batteries Provide Outstanding Run Times

D

TN15200

POCkET NEEDLE LUBRICATORPush button delivery system allows precise control

over placement of lubricant• Machined aluminum body for extended life• Designed for intricate and delicate machinery

$9.98

Factory Redeemable Rebates with Select Lincoln and Mityvac Products Between April 1-June 30, 2013. Go To: www.lincolnpromotion.com for details

$40.00Factory

Rebate!LN1864

$25.00Factory

Rebate!

$25.00Factory

Rebate!

41




FLUID RECOVERY, GREASE AND LUBE

MTL1185L

MEGA-BOOST LOCk AND LOAD GREASE GUN• Dual piston design generates

10000 psi to push grease through clogged fittings

$141.76LN1133

PISTOL GREASE GUN• Includes 12” flexible

grease hose and coupler.

$49.15

N

L

High Pressure Grease Fittings and Adaptors

LN1147

LEVER GREASE GUN• 18” Whip hose and coupler.

• Fast one-hand operation • Follower flips over for use with cartridge 16 oz. bulk 14.5 oz cartridge lube capacity

$41.13

LN3601

18 GALLON PRESSURIZED OIL EVAC SYSTEMDesigned to provide anaffordable option to draining,transferring and evacuatingused oil quickly and safely• 18-gallon tank includes a preset air regulator that allows the use of standard shop air up to 150 psi.• 14-inch telescoping bowl with a height adjustment range of 45 to 72 inches.

$290.11

LN1142

HEAVY DUTY LEVER GREASE GUN• Heavy Duty Construction• Three way loading• Positive priming with “flip over follower”

$30.77

FREE!

JDFC-25GC

25-GALLON GAS CADDY U.L. APPROVED• 25-Gallon Steel Tank, Heavy-duty, UL

Listed cast iron pump with carbon vanes

• Two-way operation, one gallon for every 12 revolutions, with fill level gauge

• Heavy-duty 10” steel wheels• Ground wire and clamp

$868.35

Item # Pics. Fits Price

LN5803 A Needle Nozzle $12.07

LN5812 B 12” Hose $19.53

LN5818 B 18” Hose $21.89

LN5845 C Hydraulic Coupler HD $13.02

LN5848 D 360° Hydraulic Coupler $54.40

LN5849 E 360° Degree Extension Coupler $60.85

LN5852 F Standard Hydraulic Coupler $6.86

LN5852-54 F Standard Hyd. Coupler (54 Pack) $186.81

LN5855 G Straight Extension $38.15

LN5858 H Two Way Extesion Adaptor $41.98

LN5859 I Locking Coupler $31.34

LN5861 B 36” Hose $37.67

LN5883 J Angle Grease Fitting $9.70

LN83278 K U Joint Attachment $44.24

LN81387 L Z Swivel 1/4 MPT x 1/2-27 Male $77.46

LN83594 L Z Swivel 1/4”x1/4” $93.48

LN81458 N Button Head Adpt. Coupler 5/8” $54.06

LN81980 O 1/8” Sleeve Locking Adapter $23.71

LN82399 P Swivel for Air Pumps 1/4 NPT - 1/2”-27 $38.26

LN82784 Q Needle Adapter Extension and Locking Sleeve $30.02

A B

LN3675

25 GALLON FUEL CADDY• Large capacity 25-gallon

welded steel tank• 2-way rotary moves 1 gallon per

12 revolutions• 7’ (2.1m) long wire-reinforced

fluid transfer hose • Easy-to-read sight gauge • Fire-screened vent cap prevents

tank pressurization• Includes ground wire and anti-

spark skid pads$635.90

Universal and Popular Fittings for Manual, Air, and Hydraulic Lubricating Equipment.

C

E

O P

F

H

J

M

G

I

D

K

MTL1175LLOCk AND LOAD GREASE GUN

• Standard duty for general application greasing

$46.04

Reloading Grease is TWICE as Fast Compared to the Competition! • Never worry about crossing threads on your barrel again! • Automatic Bleeder Automatically bleeds air when reconnecting the barrel and head. Reduces air locks and priming problems

IN8893

WASTE OIL DRAIN WITH AIR EVACUATION• 18 gallon steel recovery tank with 6’

wire reinforced drain hose• Tank-mounted oil-level sight gauge• Standard 14” x 5” deep drain funnel• Extendable drain tube from 43.5”

to 71”

$316.35

Q

MWK2446-21XC

12 VOLT CORDLESS GREASE GUNOver 8,000 PSI max operating pressure for heavy

duty applications and dispenses up to seven grease cartridges per battery charge.

• Integrated Hose Storage and LED Fuel Gauge:• Backed by a 5 year warranty • 36” High Pressure Flex Hose w/ Spring Guard,

Coupler Included, (1) M12™ XC LITHIUM-ION Battery, Charger and Carrying Case.

$305.89

4 Amp XC Battery (Value $150)

$35.00Factory

Rebate!

42




ATF SERVICE, FLUID RECOVERY AND TRANSFER

AL17922 $50.84

AL19722

PLASTIC DRIP PAN• Made of durable polyethylene material

Dimensions are 24” x 36” x 1 1/2”

$29.05

Funnel Filters

Porous filter material allows fluid to quickly pass through into funnel or pan.

LS38750 15” Round Oil Splatter Protective Pad $10.86

LS38780 22” Square Oil Splatter Protective Pad $25.05

AL17892

TRANSMISSION DRAIN FUNNEL 22” X 23”

$20.78

AL17902OVER SIZE TRANSMISSION DRAIN FUNNEL 24” X 36”

$56.77

MYMVA7216

ATF REFILL ADAPTOR kIT WITH HOSE• Converts MV7201 Fluid Evacuator Plus into an

automatic transmission refill system. Quick-change coupler allows fast adapter changes

• Brass ball valve controls the flow of fluid• Ten (10) adapters fit Ford,Toyota,BMW,Honda,

Nissan,VW,Audi, and Mercedes transmissions• Includes custom-molded storage case for

adapters$167.65

PL75668 8 Quart $63.49

Thumb operated valve controls flow, flip action locks valve open.14” flexible metal spout with tapered 1/2” OD

Painted Oil Measures with Auto Spouts

Item # Size Reach Funnel Price

AL11102 8 Gal 39”-60” 13” $131.75

AL17432 18 Gal 36.5”-77” 15” $214.52

Item # Size Reach Drain Price

JDI-18DCP 18 Gal. 48”-71” Yes $194.03

JDI-8DCP 8 Gal. 48”-67” No $105.69

Item # Use Color Price

AL17942 Oil Black $22.44

AL17952 Antifreeze Green $22.44

Item # Size Adaptors Price

MYMV6412 2.5 10 $345.19

MYMV6400 1.2 — $194.28

MYMV6410 1.2 10 $331.73

Heavy Duty Poly Drains with 2.5” Swivel Castors. 18” Funnels with Strainer Avoids Drain Plug Loss

18” Funnel Portable Oil Re-covery Drains with Spouts

4.5 Gallon Recovery Containers with Easy Pour Out Spouts

Rugged Portable Adjustable Height Oil Lift Drains

ATF Refill Systems

Item # Pic Capacity Pump Price

MY7201 A 2.3G Pump Press/Vac $122.09

MY7300 B 2.3G Air Vac $141.54

MY7400 C 1.9G Pump Vac $99.16

Mityvac fluid evacuators are ideal for removing fluids from small tanks and reservoirs. These units are lightweight and portable, and include integrated reservoirs. Applications include evacuating engine oil, coolants, transaxle grease, and power steering, transmission, and brake fluid. Hoses and general application fittings included.

Fluid Evac and Replacement Systems

A B C

MYMVA660 $25.10

POWER STEERING EVAC ADAPTER• Adapts to the varying diameters of

many automotive power steering reservoirs.

• Fits snuggly in the neck of the reservoir

• Performs hydraulic brake and clutch bleeding using additional adaptors

• Can be used on most import or domestic vehicles

Dispenses fluids to fill or top-off master cylinders, coolant bottles, automatic transmissions, differentials, and power steering and other reservoirs.

LT991

8 PIECE HOLLOW END LINE TAPS• Hollow end line taps rethread female fittings without line removal.• Hollow end of tap slides over flared end of line

easily, rethreading female connector.• Sizes14mm, 16mm, 18mm, 20mm 22mm, 24mm,

27mm and 1-1/8$160.78

30 QUART MULTI DRAIN TUB• 30 quart heavy–duty, plastic

drain tub

AL19202

TRUCk DRAIN WITH LIDHolds 60 quarts. The curved side design helps

keep oil from spilling during movement. • Optional AL19332 Pump Kit can be added to

evacuate fluids at up to 7 gallons per minute. $312.31

AL19832

PLASTIC FUNNEL WITH LID & SPOUT CAP• 1.6 Qt. Funnel has a Removable 9” Flexible

Spout AND 4” opening for the lid

$13.36

43




FLUID HANDLING AND OIL CHANGE

WS49110

FUNNEL STORAGE SYSTEM• Safely drains all residual fluids into the

collections for proper disposal• Mounts to toolbox and most surfaces

$33.67

AL19802

2 PIECE THREEWAY FUNNEL• Two Piece Three–way Funnel

Plastic All Purpose Utility Funnels

$7.74

AST Custom Application Funnels Prevents The Mess That Normally Happens When Trying To Refill Vehicles That Have The Protective Cover Inside The Oil Head.they Are Made Of Durable Abs Plasticand Custom Seal Right On To The Head Cover.these Save Time And Mess!

AHOFAUD1000 Audi Vw Bmw Mercedes Oil Filler Funnel $68.35

AHOFGMRD08 Applicable to: Cadillac:CTS, Chevy: Cobalt, Silverado, Tahoe and Vans, GMC: Sierra, Pontiac: Grand Prix, Saturn: SL1, Ford: Explorer and F150 $30.77

AHOFTOY1001 Toyota Oil Filler Funnel $68.35

AHOFTOY1038 Threaded Oil Filler Funnel For Toyota & Lexus $30.77

AHOFSU1042 Subaru Oil Filler Funnel $31.03

AHOFFM2012 Ford Mazda Oil Funnel for most 4 cylinder engine vehicles. $32.20

Save Clean Up And Labor Time

17 GALLON OIL TRANSFER TANkER• 5” diameter freewheeling casters. • Pumps 5 gal./min. through an 8’ transfer hose. • Transfer Tanker can also be used for transferring

used antifreeze. • Floor space is 24” x 42”, and 9-1/2” high.OT5077 $893.05

CLOF-1

2 PIECE OIL FILTER SET• 2-piece tool sets include 12”

and 15.5” sizes• Oil Filter Pliers Capacity 2-3/4”

- 4-1/4”, and 2-1/2” - 5-1/2”

$58.63

GY1211P

3/8” DRIVE 11 PIECE PIPE PLUG IMPACT SOCkET SET• Set contains 4–Point Male sizes 3/16’’ to 3/8’’ and

Female sizes 1/4’’ to 3/8’’. Male Sizes 3/16’’ , 1/4’’ , 9/32’’ , 5/16’’ , 11/32’’ , 3/8’’. Female Sizes 1/4’’ , 9/32’’ , 5/16’’ , 11/32’’ , 3/8’’

$50.09 GY1308P

1/2” DRIVE 8 PC. PIPE PLUG SOCkET SET• Set Contains 8 Pieces, 4 Point Male sizes 1/4’’

to 5/8’’.• Male Sizes 1/4’’, 9/32’’, 5/16’’, 3/8’’, 7/16’’,

1/2’’, 9/16’’, and 5/8’’$54.33

OT5097

LOW PROFILE TRANSFER TANkER• Handle is removable for easy storage.• Screen attached to reservoir allows Transfer

Tanker to be stored on its side when empty.• Only 7-1/2” from floor to top of reservoir.• Comes equipped with a pneumatic pump (No.

529966) and a 15-gallon reservoir.

$962.97

PL75070 2 Quart $5.30

PL75072 6 Quart $7.91AH2101

7 PIECE OIL FILTER AND SOCkET SET• Covers All Mercedes-Benz Applications and

most VW/Audi, BMW, Saturn, Toyota, Mazda and GM

• Covers Ford Escape Hybrid, Dodge Sprinter, Jeep and Volvo and most cars in the American market

$115.21

Ships By Truck

JDAFC-100-94

AUTOMOTIVE OIL FILTER CRUSHER• Cabinet surrounds the high pressure hydraulic hose for added safety• Easy to operate, specially

designed door channel prevents leakage

• Pump/Type: Air/Hydraulic, size Ht: 28.5”, Dp 12.75

$2,371.15

Ships By Truck

SHIPS BY TRUCK

IN8878

LOW PROFILE ECONOMY TRUCk DRAIN WITH PUMPIdeal for oil draining trucks where a pit or hoist is

not available Large 18 Gallon baffled tank captures oil and

transports with ease • Large metal screen • Convenient rotary hand pump facilitates easy

evacuation to large oil tanks

$364.97

8 QT. DISPENSER WITH LID ANDCAP• 8 Quart Dispenser with a spout

cap and lid to keep out dirt, dust and other contaminants. Many large SUVs and trucks now require more oil.

AL19702 $24.97

AUOLS301

OIL LIGHT AND SERVICE RESET TOOLReset oil service light, service mileage and service intervals on most vehicles without using the OEM scan tool. • Set Inspection 1 /2 Service Intervals

and miles• 100% OBD2/EOBD coverage and

many other features

$252.75

44




OIL CHANGE

CM2465

• 64mm x 14 flute size to fit all 4 styles of Toyota, Lexus & Scion Oil

• 6 specially designed notches to engage “ears” on caps for maximum torque

Item # Desc. Pc SaleLS61450 Most Popular 10 $74.46LS61500 Master Set 17 $119.98

OT6969

24” CHAIN WRENCH•Works on many different-shaped objects, such as

square, round, hexagon, oval, etc. •Chain grips objects ranging from 6-24”

$99.63

LS13300

5 PIECE FILTER SOCkET SET• Contains very low profile,

6 point 24mm, 27mm, 29mm, 32mm and 35/36mm sockets for use on oil and fuel filter canisters when replacing the element.

$44.42


LS57010 Swivel Grip Oil FilterWrench 2.375” - 2.625” (60.3-66.7) $15.10LS57020 Swivel Grip Oil Filter Wrench 2.875” - 3.25” (73 - 82.5mm) $14.15LS57030 Swivel Grip Oil Filter Wrench 3.5” - 3.875” (88.9 - 98.4mm) $14.64LS57040 Swivel Grip Oil Filter Wrench 4.125” - 4.5” (104.7-114.3) $15.58

LS14650 $30.22

FILTER SOCkET SETCan be used for a variety offilter housing applications.All sockets are 3/8” drive.

Item # Label Style Size Flute OEM Brand Price

AH2124 A Cup 24mm 6 pt BMW Ecotek AST $22.02

AHTOY640 C Cup 64mm 14 Toyota Lexus AST $19.71

AHTOY730 D Cup 73mm 14 Toyota Lexus AST $20.09

AHMO219 E Cup 74mm 14 Toyota Mazda AST $20.86

LS61600 F Cup 64/65 14 Toyota Lisle $8.46

AHF7630 G Cup 76mm 30 Ford AST $17.43

AHF9336 H Cup 93mm 36 Ford New AST $17.43

KD3941 I Swivel 64-76mm Friction Band Universal KD $20.83

KD3942 J Swivel 73-83mm Friction Band Universal KD $20.83

KD3943 K Swivel 89-99mm Friction Band Universal KD $22.04

KD3944 L Swivel 96-111mm Friction Band Universal KD $23.76

LS54200 M Swivel 4.28-4.75” Band Universal Lisle $13.21

LS54300 N Swivel 5.25-5.75 Band Truck Lisle $13.69

KD2320 O Ratchet 4.12-4.65 Band Truck KD $27.31

KD2321 P Ratchet 4.65-5.15 Band Truck KD $27.31

KD2322 Q Ratchet 5.15-5.65 Band Truck KD $27.31

OT6903 R Cup 76.5mm NA Ford Mazda 2.3L OTC $21.78

OT6904 S Cup 88.2mm NA Hyundia 3.3 V6 OTC $20.73

OT6905 T Cup 66.5mm 14 Suburu 2.5 OTC $20.73

OT6906 U Cup 65mm 14 Toyota Avalon OTC $21.78

OT6914 V Wrench 232-234 NA Davco OTC $42.55

OT6915 W Wrench 382/384 NA Davco OTC $52.92

KD2320W O Ratchet 4-1/8” to 4-21/32 XW Band Truck KD $34.13



ET988 X Wrench 2.5-3.7 Stubby 3 Leg Universal Cal-Van $14.46

ET987 Y Wrench 2.5-4.75 3 Leg Universal Cal-Van $20.36

AHBM1276 Z Cup 76mm 12 BMW AST $18.57

AHHD1474 A1 Cup Harley AST $31.25

C

GF

ED

H I

A

J K L

M

O P Q R S TU

V W X Y Z

Popular Oil Filter Wrenches

A1

CM8940

TORQUE LIMIT RATCHET WRENCH FOR OIL FILTER HOUSINGSInstalls and removes Oil Filter Housing Caps with 25Nm torque specifications. Never Over Tighten Again! • Reverse direction is full torque. 11-1/2” (290mm)

long with soft-grip handle.$79.96

4-1 TOYOTA LEXUS OIL FILTER HOUSING CAP WRENCH

$29.96

New heavy duty design with a welded steel plate for extra strength. End cap filter wrenches fit the most popular domestic and import vehicles.

Tough, Stainless Steel Band with Permanently Bonded Textured Coating for Superior Gripping Power won’t Slip. Swivel handle, with adjustable tension

45




TRAILER TEST TOOLS

Item # Type Desc. Sale8-1 Drain Plug Wrenches

CM2495 Hex Female Hex Sizes: 12- 19mm $42.95

CM2497 Square & Hex Male

Sq. 8,10m, 3/8, 1/2, Hex 10,12, 14,17m $42.95

KD3870

7 PIECE OIL PAN GEARWRENCH PLUG REMOVAL SETGearWrench technologymakes oil change an easier job!This set contains all the popular SAE/Metric sizes to remove oil plug bolts.• Includes color coded plug sockets

$74.69

Item # Type SaleIP9008-SE Deluxe Super MUTT® $2,310.88

IP9008-DL Deluxe Super MUTT® with DL accessory $2,600.47

IP8026

• For Light Duty Car, Truck and Trailor

$35.74

IP8027• For Light & Medium Duty Truck,

$36.85

• Extends harness life and eliminates guesswork• Great Preventative Maintenance Tool• Promotes Safety & Limits Road Hazards

Quickly Test, Clean and Repair Truck & Trailer Connectors

Extends Battery Life By Restoring Connections

AL19772

ONE QUART SPRAY BOTTLE

$8.43

• Industrial sprayer for use with light oils, solvents, and detergents.

• The durable polyethylene bottle is impervious to high and low temperatures.

• The trigger mechanism is resistant to damage caused by caustic materials.

IP8028• For Medium Duty Truck, SUV

IP8029

7 ROUND PIN TOWING MAINTENANCE kIT

7 SPADE PIN MAINTENANCE kIT

6 ROUND PIN MAINTENANCE kIT

4/5 PIN MAINTENANCE kIT

$62.58

Test, Clean & Restore Tractor/TrailerConnections • For Use On 7-way Round Pin Terminals • Test ligths and ABS signal from Tractor. • Rejuvenate & Enhance Contact Points • Tester Features Emergency Bypass jumpers

IP8024

7-WAY ROUND PIN TERMINAL CLEANERRecondition bad connectors by removing corrosion

and resizing 7-way Round Pin Tractor/Trailer terminals.

• For Use On 7-way Round Pin Terminals $34.39

OT5911

DRAIN PLUG PRONO hot oil on hands. NO touching of hot plug. NO

dropping of plug in hot oil. • Remains attached to the tool so it won’t drop

into hot oil.$25.91

TA17650

DRUM FAUCET

ONE MAN TRAILOR SAFETY TESTING EQUIPMENT

• Drum faucet is 3/4” NPT male

• Auto self closing

$20.61

The Super MUTT® places a load on the trailer’s electrical circuits to identify wiring problems while providing remote control operation over both Air Brakes and Lights.

LS60200

6.5” HEAVY DUTY STRAP FILTER WRENCH• Use with 1/2” drive to remove or install filters and

other objects up to 6-1/2” in diameter. 3-5/8” long yoke fits into tight areas.

$23.60

IP8044

• For use on 4, 5, 6, 7 (spade), and 7 (round) truck and trailer male and female terminals

• Includes: (6) Terminal Cleaners, (6) 8mm Swabs, (12) 5mm Swabs and (1) tube of DeoxIT® electrical contact cleaner/enhancer.

$106.18

TRUCk AND TRAILER CONNECTOR CLEANER MASTER SET

Factory Drop Ship

LT265

OIL CAP REMOVAL SETEasily removes oil caps without damaging them• Slotted end fits Toyota and most single fin caps• Double prong side fits into slotted notched sides

of Nissan caps

$16.11

LAU301050080

SERVICE REMINDERS AND OIL & MAINTENANCE RESETTERReset without the need for more expensive scan

tools. Capabilities for Brake Pad and Filter resets are also available, along with many other reset functions

• Reset Service Reminder Lights • Reset Maintenance Lights • Reset Oil Service Lights

$171.43

TX108

DEF CHECk TESTER• Tests the Urea concentrate; if the mixture is

0.7% off, the manufacturer suggests replacing the DEF and proceed to identify why the concentrate was off.

• Temperature compensating discs test DEF whether they are cold or hot.

$21.49

IP8048

17 PIECE ELECTRICAL TERMINAL MAINTENANCE SETAn Assortment of tools specially designed for

cleaning all vehicle electrical connections found in commercial heavy duty fleets.

• For Deutsch, Cannon, 7-way Round, Bullet, Weather pack, common ABS Sensor and Power Connectors, trailer light connectors and more.

$111.79

IP8045

PLOW ELECTRICAL CONNECTOR TERMINAL CLEANERSRepair intermittent electrical connections.

Cleaning and rejuvenation of old dirty plow connectors made easy.

• Clean and Restore male and female electrical plow connectors used on minute mount and similar set ups

• Applications: Western, Fisher, BOSS, Meyers and more.

$44.69

$49.14

46




SHOP AND ROAD LIFTING EQUIPMENT

• Dual pump pistons – just five pumps gets you to maximum height of over 18 inches. • Low profile – 3-1/2 inches, aircraft-grade billet aluminum • Two-piece, 45” long handle, Removable, rubber saddle padOT1532

2 TON ALUMINUM RACING JACk

$415.32

2 TON PORTABLESERVICE FLOOR JACk IN CASE• 2 ton service jack

OT1526

3-1/2 TON QUICk LIFT FLOOR JACk• One pump to load, three pumps to full height

unloaded.• Extra wide lift range – from 4” to 21”

$333.74

OT1500A

3 TON FLOOR JACk ANDSTANDS PROMO• Low 5”, Ht. 20”, Len 40”, wt 80.5 lb.

$255.85

SU6613A

2 TON LOW LIFT SERVICE JACk• Low 2 5/8”- To High Height 19 5/8”• Foot Pedal Provides Quick No Load Lift• Thick Foam Handle Pad

$321.98

OT1503A

2-1/2 TON SERVICE JACk• 40” Long, 20-1/2” high height, 6” low height

$189.10

IN3003

3 TON QUICk LIFT 2 PLUNGER DOUBLE PUMP• Dual piston for quicker lifting action

$275.52IN200T

2 TON LOW PROFILE SERVICE JACk• Universal joint technology and

precision release valve • Low 2-3/4” to 20”

$339.91

OT1525

2 TON HEAVY DUTY SERVICE JACkThe strongest jack frame in its class; features

flanged edges, both top and bottom, to resist twisting.

• 3-3/4” retracted height, 30” long chassis, and 48” handle

• 3-3/4” to 22-3/4” lifting range; 6” saddle dia.; 27” overall reach; 6-1/2” frame height.

• Conforms to ANSI PALD Part 10.

$537.62

OT1536

3.5 TON JACk AND STAND PROMOTION• 3-1/2 Ton Service Jack with 6-Ton Jack Stands

3-1/2 Ton Service Jack One pump to load, three pumps to full height unloaded.

• Extra wide lift range – from 4” to 21”.• Jack stand base: 11-7/16” x 10”; height range:

15-3/4” to 24”.$314.61

SU6602ASJ

2 TON HD ALUMINUM RACING JACk• Low height of 3-1/2” and high height of 19”• Qucik Lift System, 5 strokes to high height with no-load Dual return springs• Rubber saddle pad and foam bumper pad

protects vehicle$389.27

IN350GT

3-1/2 TON FLOOR JACk• Lifts from 4” to 19 1/2”• Universal joint technology for precise release valve control• One-piece 50 1/4” padded handle parks

upright

$448.99 IN3222C $99.21

SU6603JPK

GARAGE SERVICE AND JACk STAND VALUE PACk3 Ton Capacity Floor Service Jack with Jack

Stands• Jack features ow Height 4.5”, High Height 19.5”• Includes 3 Ton Jack Stands

$237.36

OT1533

2 TON ALUMINUM JACk AND STANDS• Lifts Two Tons and Weighs only 43 lbs.!• Five pumps to max. height – 18”.• Low profit le – 3-1/2” – makes it perfect for

ground hugging, high performance cars.• Stands 10-1/4” min. height, 15-1/4” max. height.• Made from aircraft-grade aluminum.

$468.10

Item # Ton Lift LBS Sale Price

IN206 1.5 3.25L x 15H 30 $276.77

IN210 3 3.75L x 19.3”H 55 $467.08

Aluminum Racing Jacks

Double-pumper technology provides rapid lifting efficiency. 2 Piece handles

SU66037

3.5 TON SERVICE JACk W/RAPID RISE FEATURERapid Rise hydraulic power unit includes dual

pump pistons that raise the lift arm to maximum height in six full incremental pump strokes

• Chassis Height 6.37• Chassis Length 28”• High Height 20.5, low 3.87”

$326.92

47




SHOP LIFTING EQUIPMENT

• Overload and bypass safety valves prevent the jack

from being used beyond its rated capacity and ram over extension.

• Low Height 8.375”, max with adaptor 21.12”• Features ram extension screw with self-retracting ram.

OM23221

22 TON AXLE JACk AIR/HYDRAULIC• Min ht. 9 1/2”, max ht. 19 1/2”

$692.41

UNDBT2

DOUBLE BAG RAk JACk

$610.38

UNTBT2

3 BAG RAk JACk• Two ton air jack Quick and easy to use,

completely mobile.• Adjustable top swivels 360 degree’s, low

Height: 6.8”, Full Extension: 18”

$801.93

OT1580

EASY ROLLERVEHICLE MOVER• 1500lb capacity per unit.• Hydraulic lift mechanism with

locking pin Fits tread with up to 12”$184.92

UN605000

GO-JACk FASTER CASTER SYSTEM• Works by ratcheting• Lifts 12500 lbs. (5,000 lbs for 4 units)• Works on wheels from 13” to 16” diameter

$241.15

• Two ton air jack Quick and easy to use • Relaxed Height: 5.75” Full Extension: 13.75”

OT1788A

22 TON AXLE JACk• Self-retracting, spring return feature.• Lifting range: Screw extended:

8” min./17” max. height with adapter Screw retracted: 8” min./12-1/2” max. height

• Cylinder stroke, 4-3/4”, extended screw length, 5”; PSI range, 90-145.

$792.94

OT5092

27.5 TON UNDER AXLE HYDRAULIC JACk

$2,015.78

• Minimum retracted height (with saddle): 8-1/4”

• Maximum lifting height (with screw extended & large adapter): 21-3/8”

Ships By Truck

Ships By Truck

Ships By Truck

IN565E

22 TON AXLE JACk• Heavy-duty steel saddle lifts

from 4.75” to 23”” (with longest extension included)

• Compact head design with self-retracting ram

• Ram extension kit included with .75”, 2.75” and 4” extensions in convenient handle-mounted holder

$845.78

Ships By Truck

Item # Ton Length Low/High Sale Price

HW93642 2 28.5” 4.5/20” $421.15

HW93652 3 31.5” 5/23.5” $629.19

HW93657 4 49” 5/25.75” $1,969.17

HW93660 10 53.5” 6.75/25.5” $3,478.60

Made in the USA Hydraulic Service Jacks Air and Hydraulic

Service Jacks

22 TON AIR HYDRAULIC TRUCk JACk PROMOTION

SU6622 $899.10

OM49155

MOTORCYCLE LIFTFoot pedal operated power unit• Non-slip foot pedal allows effortless lifting of load• Rubber padded lifting platform prevents

scratching and protects your machine$245.85

SU6623

20 TON AIR/HYDRAULIC TRUCk JACk5” diameter composite wheels make

maneuverability easy./ Self-retracting ram• Integrated filter protects air motor.• Extension Screw Travel (in.) 2.755• Low 8.6”, maximum Height with adapter 23.35”,

ram Travel 3.9”$610.26

SU6710

10 TON PORTABLE AIR LIFT JACkIdeal for lifting trucks, trailers, farm and

construction equipment where crowded conditions require single point contact but may be used in pairs.

• Extension tubes and detent pins provide multiple lift heights and support after lifting.

• Low 17.75”, maximum height with extension tubes 49”, ram travel 11.5”

• Overall Length (in.) 58

$924.78

Sealed pumps prevent contamination from dirt and moisture. Features a safety valve to prevent overloading and the hydraulic unit is fully repairable and replaceable.

Heavy duty service jacks by Sunex are designed for continuous, dependable performance in fleet truck shops, farm equipment dealers, bus company garages and commercial vehicle service bays.

HW93642

HW93652

HW93657HW93660

Item # Type Ton Length Low/High Price

SU6604 Hyd 5 55.5 5/22” $977.19

SU6606 Air/Hyd 5 55.5 5/22” $1,342.56

SU6609 Hyd 10 61 6.25/22.5 $1,310.44

SU6614 Air/Hyd 10 61 6.25/22.5 $1,917.95

SU6604

SU6614

48




Bottle Jacks and Stands

SHOP LIFTING EQUIPMENT

E

G

IN3120

5 TON SERVICE JACk• Capacity-10,000 lbs. Min.-6 1/4. Max.-22 1/8• Long 56” body

$1,033.81

IN3130

10 TON FLOOR JACk• Capacity-22,000 lbs. Min.-6 1/4”. Max.-22 1/8”• Long 61” body for lifting of vehicles w.long overhangs• Extra-wide stance for additional stability •

Foot-operated pump provides quick, efficient movement of the saddle to the load

$1,430.28

Item # Ton Low High Sale Price

OM32066 6 15.75 24.375 $111.82

OM32126 12 19.75 30.25 $198.31

Innovative design of Magic Lift offers a fast lift for professional performance• Rack bar quickly raises to desired support • Counter-weighted pawl locks racket bar securely in place

OT1511A

10 TON AIR HYDRAULIC SERVICE JACk• Specifications: Lifting range 6-3/8” to 22”,

Saddle dia. 7-3/8” Overall reach 90”, Frame height 12-3/4”, Handle length 42”

$2,200.23

AUTO LIFTFEATURE

Item # Ton Low High Air/Manual Misc Brand Sale

IN5512B A 12 10” 19” Both Ram Screw AFF $273.47IN5520B B 20 9.5” 17.25” Both Ram Screw AFF $330.51OT4313C C 12 9.5 18.375” Both Ram Screw OTC $345.76OM18205 D 20 9.5 18.5” Both Ram Screw OMEGA $243.21HW93737A E 10 17.5” 52.5” Air Jack Stand Feature Hein Werner $1,994.77HW93731 F 20 9.37” 17.6” Air Wheel Cart Style Hein Werner $1,569.58OM18302C G 30 11” 18.15 Both No Ram Screw Omega $604.00OT4321C H 20 9.45 17.7 Both Ram Screw OTC $415.32IN3506 I 6 8” 16” Manual Ram Screw AFF $39.56IN3508 J 8 7.75” 15.5 Manual Ram Screw AFF $62.02IN3512 K 12 8.5” 17.2 Manual Ram Screw AFF $69.43IN3514 L 12 7” 13.2 Manual Ram Screw AFF $66.51IN3520 M 20 9.55” 18.25 Manual Ram Screw AFF $115.19IN3522 N 20 7.75” 14.25 Manual Ram Screw AFF $111.10IN3530 O 30 11” 18.55” Manual No Ram Screw AFF $286.97IN3550 P 50 12” 19 Manual No Ram Screw AFF $480.22

A B C D

E

H I J K L

M O PN

F

Ships By Truck

* Ships By Truck

OT1582

2 TON ALUMINUM JACk STANDS• 10-1/4” min, 15-1/4” max. height.• The pair weighs only 11 lbs.!• Made from aircraft-grade aluminum.

$126.79

Item # Ton Low High Style Sold As: Brand Sale

OT1733A A 3 12.5” 18.5” Ratcheting Pair OTC $153.52OT1736A B 6 15.5” 24.5” Ratcheting Pair OTC $204.66IN3303 C 3 11.8” 18.55” Ratcheting Pair AFF $49.38IN3306 D 6 15.55” 24.12” Ratcheting Pair AFF $88.55IN3312 E 12` 19.25 31” Ratcheting Pair AFF $203.87OT1780 F 22 13.87” 19.87” Pin Pair OTC $290.71IN3314 G 20 12” 20 Pin Single AFF $216.79IN3310A H 10 28” 47 Pin Single AFF $209.52HW93503 I 3 12” 19” Ratcheting Pair Hein Werner $110.28HW93506 J 6 16.37” 25.37” Ratcheting Pair Hein Werner $164.45HW93511 K 10 30” 52 Pin (2 pos) Pair Hein Werner $969.58HW93512 L 10 19.5” 31.5” Pin Pair Hein Werner $717.15IN3315A M 2 47.88” 85.38” Tripod/Screw Single AFF $149.10IN3320A N 3/4T 55.25” 81.5” Pole Single AFF $149.14OT2015A O 3/4T 54.25” 81.5” Pole Single OTC $150.15

OT2018A P 3 58.88” 91.55” Tripod/Screw Single OTC $177.96

I KL M N

O PJ

CBA

HG

D FSU1520

20 TON TRUCk RAMPSDesigned to elevate the front or rear of a truck to

gain access to frame and components.• Accepts tire widths up to 16”• Telescopic T-handle extends to expose wheels

for easy maneuverability and retracts for storage.

$889.39

49




TRANSMISSION JACKS AND SERVICE

Name Brand Equipment that Shops Can Count On! All of these Jacks Feature One Year or More Warranty and Will Fit the Needs for Heavy Duty, Full Use Automotive, or Limited Use Repair Shops.

Under Lift and Floor Style Transmission Jacks

Item # Ton Range Type Brand Style Sale IN2158 A 1100 41”-71” Hyd AFF Perfect for the small shop $492.64IN3171 B 1100 8.5”-28.5” Hyd AFF Cars and Light Trucks, Floor Style $530.07IN3172 C 2200 8”-31” Hyd AFF Floor style for cars and light trucks $800.18IN3180 D 4400 8.5”-34” Hyd AFF Heavy Duty Trucks $1,577.94IN3190B E 1100 38”-73.5” Hyd AFF Two-stage ram, large saddle with spring- loaded corner brackets $1,172.45IN3192A F 1100 38”-73.5” Air/Hyd AFF Two-stage ram, large saddle with spring- loaded corner brackets $1,312.33OT1521A G 1000 6.5”-29.5” Hyd OTC Cars and Light Trucks $597.07OT1728 H 1000 35.5”-75” Air/Hyd OTC Two stage, Lifetime Marathon Warranty®. Made in U.S.A. $3,536.88OT1793A J 1000 34.4”-71.6” Hyd OTC Safety overload system $1,235.73

OT5019A K 2200 8.25-36.5” Hyd OTC Can be used for almost all class 7 and 8 heavy-duty trucks with the included adaptor. 52” long, 32” wide $2,301.32

HW93718 L 2000 10.25”-44.75” Hyd Hein Werner Wishbone design allows unit more mobility $2,851.81

OT5237 M 1000 36 to 73.5” Hyd OTC Universal mounting head provides wide fore and aft tilt range. Two-stage hydraulic cylinder design. Innovative folding foot pedal and release provides $2,748.87

IN3181 N - - Adaptor AFF Fits most HD trans jacks for use with Eaton, Fuller and other difficult to manuver transmistions. $164.73

K

L

LM N

Most Jacks Ships By Truck

Item # Item Rating Range Misc Price

SU7700B A 700 50.3-70.75” Ideal for small shops. Adjustable saddle tilt: fwd./back 15° , Side 12°. Replacement rams readily available. $364.29

SU7740B B 2000 6.5-31.5”Use for the removal, installation and moving of heavy duty diesel truck transmissions. Length 37.5” x 18.5 Wide. Saddle Tilt Fore and Aft 79 by 9, Side to Side +10,-18.

$801.44

SU7750B C 1200 6-31.5”Use for light trucks, SUV’s and standard car transmission repair. Length 37.5” x 18.75 Wide. Saddle Tilt Fore and Aft 56 by 10, Saddle Tilt Side to Side +10,-15

$574.77

SU7752C D 3000 8.62-36.6”Use for the removal, installation and moving of heavy duty diesel truck transmissions. Length 43.5 x 26” wide. Saddle Tilt Fore and Aft 16 by 15, Tilt Side to Side +11,-11.5

$1,560.51

SU7793B E 1000 35.5-75.5”Handles all passenger car, van, and light truck automotive transmissions. Foot-operated pump, Saddle Tilt Fore and Aft 53° by 30°, Side to Side +10°, -30° Base 21.25 x 35”

$768.98

SU7795 T 1000 35.5-74”Use for removal, installation and transporting of transmissions. Foot activated pump. Large base: 30.25 sq. Saddle Tilt Fore and Aft 37 by 26, Tilt Side to Side 12

$1,133.33

SU7796 G 1000 35.5-73.5”Air/Hydraulic. Universal saddle with four ratcheting arms quickly adjust to the transmission pan. Wide base 30.25Sq. Saddle Tilt Fore and Aft 37 by 26, Tilt Side to Side 12

$1,319.61

Item # Ton Base Range Pin Interval Price

SU1522 22 10”sq. 11.8-19.7” 3/3.1” $220.37

SU1410 10 15.7”sq. 28-46.5” 10/2” $310.16

Transmission Jack, Stands and Accessories

Air/Hydraulic Bottle Jacks

Leave the heavy work to the Sunex® Tools complete line of Lifting Equipment. Jacks, hoists, stands - you name it! With low profiles and quick-lift technology, these jacks provide you with solutions that fit almost any application.

High Performance Air Pump Reduces Lifting Time• Manual pump feature is used when there is no access to compressed air.• 3.5” Extension screw gets the ram to full hight shown

Item # Ton Range Sale Price

SU4912CAH 12 9.9- 18.5” $261.54

SU4920CAH 20 10.5-20.1” $331.28

A

A

G

G

B

B

C

C

D

D

E

E

F

F

SU7706

FUEL TANk ADAPTERDesigned for use on all under hoist transmission

jacks for automotive gas tanks removal.• Ground wire assembly prevents static electric

discharge $296.70

HJ

Ships By Truck

50




ENGINE SUPPORT AND SHOP EQUIPMENT

AO5820

• Includes 1/8” braided steel cables and 14” adjustable hooks, capacity: 700lbs.

$86.07

IN812

12 TON BEARING PRESS• Designed for light duty applications• Seven bed adjustments• 12 ton bottle jack with overload• Heavy-duty return springs for fast ram retraction

$314.90

IN820

20 TON BEARING PRESS• Automotive and light industrial use• Eight bed adjustments• 20 ton bottle jack with overload• Heavy-duty return springs for fast ram retraction• Reinforced head plate

$847.74

2 TON FOLDING ENGINE CRANEDesigned for shops with limited space and for maximum portabilityIdeal for rental yards• The legs easily fold

up and away and with the ram completely retracted, this uses an extremely small storage footprint

• 360º hook adds greater fl exibility in positioning lifting chains during removal and installation

• Boom length 43” - 64” with reaches of 87” 92” 97” 102”

OM44700

TRANSVERSE ENGINE SUPPORT BAR• 700 Lbs. capacity adjustable transverse bar• Two 14” adj.hook screws. Expands from 38” to 61”. Two

38” braided steel cables 1/8” diameter included$103.27

Item # Item Size Capacity Price

CV501 A 4” 7 Ton $133.33

CV502 B 2/3” 5 Ton $102.56

Ships By Truck

Item # Ton Closed OAL Stroke Sale

INLRC3B 3 24.25” 45” 20.75 $131.12INLRC8B 8 24.25” 45” 20.75 $165.32

Item # Picture Style Ton Lift/Pull Sale

AG405 A Chain and Block 0.5 10’ $160.20AG410 A Chain and Block 1 10’ $178.55AG605 B Ratchet Handle Chain 0.75 5’ $193.91AG615 B Ratchet Handle Chain 1.5 5’ $231.63AG18600 C Cable 2 6’ $35.56AG18650 C Cable 4 6’ $62.84AG72A D Cable 2 6’ $72.88AGEZ2000 E Cable 1 8’ $35.43

Ideal for replacement and fabrication applications requiring extra-long lift such as cranes and trailer jacks . Comes with a clevis base that allows a pivoting connection using a pin.

Long Ram Jacks

A

B C D E

Reliable Products for Pulling, Lifting, Stretching, Lowering, and Moving. Makes Tough Projects

Chain and Cable Pulling DevicesBar Type Puller Bearing Separators Sets

IN582

ENGINE TILTER SLING WITH CRANk HANDLE• Precision hand screw crank for smooth operation• Tilts the engine to any angle while installing • Used with engine lifting cranes to efficiently

change an engine • 23 1/4” wide support bracket

$76.37

IN850SD

20 TON SUPER DUTY SHOP PRESS• Comes with an adjustable / removable pressing guard for added operator safety. • Includes large liquid filled gauge and10 piece bearing press adapter kit. • Pressing head moves side to side to

accommodate off centered pressing requirements.

• Includes 2 pc combination pinned V-block / press plate set.

• Operated manually or by air motor assist with foot control. 10 Position bed height

$1,393.25

Ships ByTruck

IN3582 $641.93

OM90153

ENGINE TILTING LEVELERMakes engine removal or installation faster and

easier• Can be used with shop crane or hoist

$68.26

ENGINE TRANSVERSE BAR WITH ARM SUPPORT

SU8300GA

1/2 TON FOLDABLE ENGINE STAND63 to 1 Ratio gearbox easily rotates engine to desired position by turning a crank handle• Overall Height 36” x 34.5” long

$530.24

Separator tools are used with bar puller and legs for a wide variety of pulling jobs.

AB

SU8750

750 LB. ENGINE STANDFully adjustable mounting head and adaptor fingers.• Overall Height 34.5” x 33.85” long, by 31” wide

$148.21

51




VISES, BENCH GRINDERS AND SHOP EQUIPMENT

WL11127 5” vise with 6” jaw opening, pipe capacity 1/8” through 2 1/2” $158.79

WL11128 6” vise with 6” jaw opening, pipe capacity 1/8” through 3” $214.84

WL11800 8” vise with 7 1/2” jaw opening, pipe capacity 1/8” through 3” $410.99

Tradesman heavy duty vises have a 360 degree swivel base with double lockdowns, a precision turned sidebar, and are made from 60,000 PSI tensile ductile iron.

WL63199 4-1/2” Jaw Width, 4” Jaw Opening, 3-1/4” Throat Depth, Fully enclosed spindle and nut increases the life of the vise, Large anvil work surface $588.46

WL63200 5-1/2” Jaw Width,5” Jaw Opening, 3-3/4” ThroatDepth, Pipe Jaw 1/4-2-1/2, large anvil work surface $709.89

WL63201 6-1/2” Jaw Width,6-1/2” Jaw Opening, 4” ThroatDepth, Pipe Jaw 1/4-3-1/2, large anvil work surface $793.96

WL63202 8” Jaw Width, 7” Jaw Opening, 4-3/4” Throat Depth, Pipe Jaw 1/8-3-1/, large anvil work surface $1,107.18

Mechanics Heavy Duty Vises features straight line pull design that includes an unbreakable spindle and nut and 360-degree swivel base with double lockdowns.

WL21400 5” Jaw with 5-1/4” Jaw opening, Throat depth, 3-3/4” Pipe jaw 1/4” -2 1/2” $317.58

WL21500 6” Jaw with 5 3/4” Jaw opening,Throat depth 4-1/8” Pipejaw 1/4”-3 1/2” $410.99

WL21800 8” Jaw with, 8-1/4” Jaw opening, Throat depth: 4-3/4”,Pipe jaw capacity: 1/4-3-1/2” $588.46

SU5001A

6” BENCH GRINDER

$174.27

• >5/8” arbor accepts standard wheel. UL ans CSA listed.

Tradesman standard duty vices have a 30,000 PSI casting to add strength for a longer life. The swivel base rotates 180 degrees for quick and easy positioning. Built-in pipe jaws handle various pipe sizes.

Item # Grit Size Arbor Price

CA09953 36M 10 x 1-1/4 1.25” $77.37

CA09955 24P 10 x 1-1/4 1.25” $77.37

CA09956 60M 8 x 1 1/2-1” $50.27

CA09959 36M 8 x 1 1/2-1” $55.41

CA09960 24P 8 x 1 1/2-1” $55.41

CA09964 100K 7 x 1 1/2-1” $47.66

CA09965 60M 7 x 1 1/2-1” $41.03

CA09966 36M 7 x 1 1/2-1” $46.91

CA09971 100K 6 x 1 1/2-1” $35.58

CA09972 60M 6 x 1 1/2-1” $37.01

CA09973 36M 6 x 1 1/2-1” $37.01

CA09974 100K 6 x 3/4 1/2-1” $30.80

CA09975 60M 6 x 3/4 1/2-1” $32.03

CA09978 60M 6 x 1/2 1/2-1” $29.87

Item # Size HP Rpm Price

DW756 6” 5/8. 3450 $125.43

DW758 8” 3/4. 3600 $209.55

Item # Jaw Open Depth Price

WL63244 2.5” 2.12 1.75 $127.03

WL63248 4” 2.25 2” $147.58

Item # Jaw Open Depth Price

WL11104 4” 4” 2.25 $72.86

WL11105 5” 5” 2.5” $121.43

WL11106 6” 6” 3” $166.26

Item # Jaw Open Pipe Price

WL14500 5.5” 9” 3” $242.86

WL14600 6.5 9.75” 3.5 $308.24

WL14800 8” 11.75” Blt in. $373.63

Item # Pic Jaw Base Price

TN22011 A 4”+Pipe Swivel $97.80

TN22012 B 5”+Rotates Swivel $143.18

TN22014 C 5+Pipe Swivel $112.82

TN22016 D 6+Pipe Swivel $141.54

Item # Pic Description Price

IN31500 A Adjustable height 28” - 36” $108.70

IN31501 B Height 32 $88.95

BENCH GRINDING WHEELS

Aluminum Oxide Abrasive - Gray Fast Cut Rate With Vitrified Bond. Bushings Included To Universally Fit Most Bench Grinder Arbors.

BPowerful induction motors for heavy-duty grinding operations • Industrial cast iron base and motor housing provide durability and prolong life• Precision-machined aluminum tool rests allow the user to accurately position work• Rear exhaust ports in wheel guards

Reversible Swivel Mechanics Vises

General Purpose Bench VisesFloor Mount Bench Grinder and Vise Stands

Tables feature 12.25” x 10”Pre-drilled slots for mounting most bench grinders 5” to 10”

A

OT4786

ALUMINUM VISE INSERTSEssential for every workbench vice. • Aluminum jaws have reliefs for 5/16 and 9/16

diameter shafts.

$28.00

Meets the Demands for Small Yet Important Jobs• Top jaws are grooved and replaceable • Double lockdowns ensure stability • Rotates 45° left or right on base

Double Anvil 360° Swivel Base Vises Feature a Slide-Out Jaw to Reverse Work Direction• Two large anvil work surfaces and extra lock downs makes this the shop choice vise

Great for General Use! • Features: Double lock down swivel base, large anvil work surface and grooved steel jaw inserts

WL69999

Multipurpose vise has a rotating head for clamping at any angle.

• V-jaw holds 1in.–3in. dia. round stock vertically. • Positive locking swivel base rotates 360°. • Large anvil allows for flat shaping.

$229.95

5” ROTATING JAW UTILITY VISE

WL333630

3 TON ARBOR PRESSPrecision cut steel rams andpinions for accurate operation.• Tables and slotted

table-plates are flat and parallel to provide accurate support.

• Base size: 8.5”x17.5”$464.84

52




BATTERY, CHARGERS AND TESTERS

TECTM85

12 VOLT AUTOMATIC CHARGER AND MAINTAINER• Charges the battery with 0.9A current with automatic adjusting as to not harm the battery during prolonged

maintaining.• Includes : SAE-71 Weatherproof connector &

SAE-74 Battery clips set.$41.65100-1200CCA ELECTRONIC

BATTERY TESTER

SIBA1

DIGITAL VOLT METER• Tests multiple battery types, including Conventional, Maintenance Free, AGM, Gel Cell, Marine and Deep Cycle batteries• Operating Range: 4.5V - 20V• Brightly 4 digit LED display is great for bright or

low light settings• Reverse polarity and over-voltage protection

$27.38

SIBA5

Tests multiple battery types, including Conventional, Maintenance Free, AGM, Gel Cell, Marine and Deep Cycle batteries• Operating Range: 100 - 1200 CCA (< +/-10%

Tolerance); 7V-15V• Brightly 4 digit LED display is great for bright or

low light settings• Easy-to use tester also provides LED results of

battery condition. 20” test leads• Reverse polarity and over-voltage protection• One year limited warranty

$86.77

SIBA7

100-1200CCA ELECTRONIC BATTERY & SYSTEM TESTER• Tests battery, starting system and charging system• Tests multiple battery types, including Conventional, Maintenance Free, AGM, Gel Cell, Marine and

Deep Cycle batteries• Operating Range: 100 - 1200 CCA (< +/-10%

Tolerance); 7V-15V• Brightly 4 digit LED display is great for bright or

low light settings

$101.23

SIBA327 $623.27

20-2000 CCA ELECTRONIC BATTERY & SYSTEM TESTER W/PRINTER• Tests 6 and 12 Volt Batteries Operating Range: 40 CCA – 2000 CCA• Tests multiple battery types, including

Conventional, Maintenance Free, AGM, Gel Cell, Marine and Deep Cycle batteries• Temperature compensating for an accurate

battery assessment in any temperature• Tests 12 Volt and 24 Volt Vehicle Starting and

Charging Systems• Built-in printer documents battery and system

test results• 10’ cable leads for extra-long reach• Reverse polarity and over-voltage protection

IP9000

PULSAR SHORT CIRCUIT/PARASITIC CURRENT LIMITEREasily troubleshoots and identifies short circuits, • Read Protect & Pulse 100mA – 50A 12VDC Circuits• Electronic Fuse Saver®, Parasitic Draw and

Bench Testing!$305.27

IP9001

PULSAR MASTER kIT• Includes 5 extra fuse box adapters, and a

voltage probe.

$398.56

TECTS-171

OPTIMATE INTIALIZING CHARGERThe Best Value initializingShop Charger - 1 battery up to 4Amps• The OptiMate PRO-S is able to initialize

new batteries, save neglected sulfated batteries and recharge & maintain good batteries.

• Able to initialize all new powersports batteries in 1 hour.

$205.03

TECTS-181

OPTIMATE DUAL INTIALIZING CHARGERGreat for enthusiasts that own

multible power sport toys, antique or exoctic vehicles that get occational use

• Charges 2 batteries at a time • Able to initialize all new

powersports batteries with 12 hour program.

$282.97

EL725

BATTERY, STARTING AND CHARGING SYSTEM TESTER• 6 & 12V Battery Tester - 12 & 24V Charging System Tester. • Guided test sequence covers - battery, cranking

volts and charging system. • Tests discharged batteries down to 1.5V

$319.86LS55410

BATTERY POST SPREADER PLIERSDual use pliers spread battery post clamps.• Tapered, ribbed tips remove corrosion and build-up from inside the clamp.

$20.31

Combining fully automatic operation & the ability to properly charge multiple battery types.• 6 and 12 Volt battery charging• Soft Start Mode for severely depleted batteries• Recondition Mode rejuvenates distressed batteries• Enhanced maintenance mode for ideal long term storage• Reverse Polarity Protection & Battery Fault Detection• Data rich display provides detailed feedback during charging

Intelligent Battery Charger and Maintainers

SCPSC-15A-OB

• On board mountable feature allows mounting of charger next to battery on collectibles and other infrequently used vehicles

• Allows safe charging of RV, deep-cycle or most batteries that have a long storage period – Turns on and off as needed

• Complete mounting kit included

$46.44

SCPS-1562A

1.5 AMP FULLY AUTOMATIC BATTERY TENDERUnique trickle battery charger automatically maintains both 6V and 12V batteries keeping them at full charge using float-mode monitoring.

$45.34

Item # Rate Automatic Fast Charge Sale

SIPL2310 10/6/2A Partial No $99.28

SIPL2320 20/10/2A Fully Yes $116.31

SIPL2510 10/6/2002 Fully Boost $125.03

SIPL2520 20/10/2 Fully Boost $157.85

AUTOMATIC ON-BOARD BATTERY CHARGER/MAINTAINER

TECTM-291

OPTIMATE LITHIUM 5 AMPS CHARGERProtect your LiFePO4 battery in a way no other

charger did before!• Pre-qualification test. Low Volts recovery• Short-circuited / dead cell check• Absorption and equalization• Charge verification voltage retention test

$122.97

53




BATTERY CHARGERS AND TESTERS

MPPBT100

DIGITAL BATTERY TESTER• Tests starter & charging systems from 350 to 700 cranking amps• 12 volt systems only

$167.71

MPPBT300

ELECTRONICBATTERY TESTER• CCA Range 100 – 1400 CCA.• Tests discharged batteries with as little as 8 volts• Voltmeter mode for testing.• Shows available power in CCAs, Bad cell

detection.• High and low voltage capture

$323.98

EL710

500 AMP CARBON PILE LOAD TESTER• Simulates actual cranking loads• Tests 12 volt batteries rated as high as 1000 CCA• Test alternators, regulators and starters• Large dual meters display battery voltage and

load$138.56

MPMDXP300

CONDUCTANCE BATTERY AND STARTING TESTER WITH BUILT IN PRINTER• Tests starting and charging system output

voltage and displays results• Test batteries from 100 to 1400 CCA• Bad cell detection• Reverse polarity protection• Tests discharged batteries• Tests multiple rating systems (CCA, SAE, DIN, EN,

IEC, JIS#)• Tests regular, AGM, and GEL batteries• Multi-language capability, including English,

French- Canadian, Spanish, and Japanese $639.85

MPMDX650P

6 & 12V BATTERY AND ELECTRICAL SYSTEM TESTER WITH BUILT-IN PRINTER• Integrated printer makes it fast and easy to present

a professional diagnostic report to the consumer • Data card reader for future test feature upgrades • Includes a 10’ Removable cable set • Proven conductance technology and test

algorithms—Midtronics analyzers are required for warranty testing at automotive dealers around the world, Advanced Starter/Alternator Testing:

• Quick starter analysis without disabling the ignition• Additional Features: VIEW/PRINT – to view last test from memory or print

another copy, QC MODE for performing quality control testing, Multiple Languages – English, Spanish, French Canadian, COUNTER Information to track activity, including good vs. replace, batteries and system test results

$1,112.20

Out Lasts Other Brands On Calibra-tion and Longevity

MPMDX-700PHD

HEAVY DUTY BATTERY TESTING SYSTEMCreated specifically for the heavy-duty commercial/fleet market ituses advanced conductance technology, making it easy for anyoneto test the full electrical system on heavy duty vehicles. • Ability to test the multiple battery systems found in trucks and commercial equipment Vehicle Applications • Group 31, Automotive, Motorcycle, Marine Cranking, Lawn and Garden, Commercial 4D/8D Battery Types • Regular flooded, AGM flat plate, AGM spiral, Gel, Global Systems • CCA, CA, MCA, JIS, SAE, EN, DIN, IEC • 6 and 12 volt batteries, 12 & 24 volt charging system testing • Starter/ Alternator Testing, and much more• 15’ Heavy Duty Removable cable set allows running tests from the cab • Includes Manual, stud adapters, 15’ cable set, tool bag, and Integrated thermal printer

$1,245.78

Item # Pic Volt Amp Meter Notes Sale

AS6026 A 6/12v 135 0-16VTests Battery Only

$80.66

AS6029 B 6/12v 125 0-16V Tests All $148.57AS6024 C 6/12/24v 125 0-32V Tests All $207.47

AS6034 D 6/12V 500 0-16VCarbon pile with timer

$157.74

Hand held units feature cables that extend out from the bottom of the handle for safe and convenient use.A Stainless steel cabinet with a recessed meter protects them from damage.

Battery Altenator, Starter and Load Testers

B

DC

A

FJ45107

EASY HANDLE BATTERY LOAD TESTER

$46.48

FJ45110

100 AMP BATTERY LOAD TESTERTest Car/truck batteries of current

draw, voltage, and alternator performance

• Tests 6 and 12 volt batteries• Quick 10 second load test

$39.47

OT3167

SABRE HP BATTERY TESTER KIT WITHOUT PRINTERDigital circuitry precisely controls battery

test loads to accurately determine battery conditions.

• Tests both flooded lead acid and absorbed glass mat batteries accurately—down to 1 volt state of charge.

• Tests vehicle starting and charging systems with minimal user interaction.

• Tests all 6- and 12-volt batteries with a 50-2000 CCA operating range.

• Flash upgradeable memory in field.

$795.43

Test Car/truck batteries of current draw, voltage, and alternator performance

• Tests 6 and 12 volt batteries• Quick 10 second load test

MPEXP1000KIT

1000 AMP ELECTRICAL DIAGNOSTIC SYSTEM ANALYZER KITSpecifically for the heavy-duty commercial / fleet

market. • Using new Dynamic Conductance Battery

Testing Technology, and designed for maximum flexibility, this analyzer will quickly become your electrical diagnostic tool of choice.

• Tests 6 & 12V batteries from 100 - 3000 CCA -even AGM & Gel

$1,837.80

54




PROFESSIONAL BATTERY CHARGERS AND TESTERS

Associated Equipment

ASUS18 6/12 Volt USA Made Battery Charger 6/12V Charger 40/40/10 Amps. 330 Amp Manufacturer Boost Rating

$292.33

ASUS20 40 Amp Continuous Rating at 6/12 Volts200 Amp Cranking Assist with a full 330 Amps Manufacturer’s Boost Rating. Appeals to the Small Shop Owner and the “Do-It-Yourself” End User. Fan Cooling Mechanism Prevents Overheating - Enhancing Unit’s Life Span Significantly

$318.56

AS6002B 6/12/24 volt fleet charger, 80/70/45 Amp, industries best charger, outdoor rated, 440 amp boost, 500 amp clamps, exclusive STOP/GO Lights

$949.98

AS6006 6/12/24 volt, 75/65/30 A, 455 A Boost, Patented Stop/Go Lite Polarity Protection, 500 Amp Insulated Safety Clamps with side terminal adapters

$659.88

AS6001A Super duty 6/12 volt charger, 100/70 Amp, 550 amp Boost, Stop-Go Lite alternator/microprocessor protection, 90 minute timer/overnight charge position

$875.65

AS6012 6/12 volt 250 Amp – 12 Volt engine start, 70/60 Amp $496.50

AS6017 12 volt 40/5 Amp, 210 Amp – 12 Volt engine start $348.02

AS6019 6/12 volt with boost, 40/10—350/200 Cold Cranking Amps $480.86

AS9425 20 Amp Itellicharger for Gell Cell and AGM Batteries is a stable and clean power supply for extended service procedures or re-flashes. Nominal 13.7V DC Output

$620.72

Solar Pro Logix - Advanced Multi-Phase Charging Process Charges Each Battery Based on its Specific Needs for Optimal Results.

SIPL3730 6/12V 60/40/15/5/275A Intelligent Battery Charger with Engine Start. Fully Automatic, Microprocessor-Controlled Operation and Charges all Battery Types

$519.23

SIPL3750 6/12/24V 60/40/15/5/250A Intelligent Battery Chargerwith Engine Start. Fully Automatic, Microprocessor-Controlled Operation and Charges all Battery Types

$673.08

BATTERY SERVICE CAN BOOST YOUR PROFITABILITY

AS6002B AS6019

TX117

BATTERY FLUID TESTER• Large 16-1/4” professional disc-type tester is

accurate down to -40° F. $18.26

MPPSC-550SKIT

POWER SUPPLY & BATTERY CHARGER• Provides clean and reliable power for charging

and maintaining battery during service reflash, complex maintenance, and in the showroom where vehicle demonstrations can require significant power from the battery.

• Provides a constant clean power supply for using scan tools and reprogramming of ECMs without discharging battery

• Reverse battery polarity protection

$575.00

EZBK50112PCK

BATTERY TERMINAL CLEANER (TOP POST BATTERIES) 12 PACK• Protective cover fits both ends. • Clean top terminals / top posts.• Great for any type of battery cable ends. • Comes 12 in a dump box display

$54.42

EZS501

BATTERY TERMINAL CLEANER (TOP POST BATTERIES)• Protective cover fits both ends. • Clean top terminals / top posts.• Great for any type of battery cable ends.

$5.92

HAMMER INDENT CRIMPING TOOL• Use hammer or vise. Spring loaded pin.• Compact and Lightweight. 8

gauge to 4/0 AWG.

$24.95EZB790C

Item # Gauge Length Sale

AOSP0612 6 12’ $35.49AOSP0420 4 20’ $58.99AOSP0616 6 16” $42.59

Item # Pic Lenth/Gage Amp Price

FJ45215 A 12/10 250 $11.83

FJ45223 A 8/12 500 $17.59

FJ45229 A 16/6 500 $24.73

FJ45233 B 16/4 600 $39.03

FJ45234 B 20/4 600 $45.80

FJ45244 B 20/2 600 $60.33

FJ45245 B 25/2 600 $66.18

FJ45255 C 25/1 800 $94.44

FJ45262 D Set - Parrot 600 $9.33

FJ45265 C 25/2 800 $197.31

FJ45266 E Red - Clamp 800 $5.75

FJ45267 E Black - Clamp 800 $5.75

FJ45268 E Set - HD 800 $11.34

Superior Quality Battery Booster Cables and Clamps

A

B

C

D

E

AS6012 SIPL3730SIPL3750

ASUS18 AS9425

The Safest, Easiest Way to Jump-Start your car.LED illuminates when clamps attached to battery

terminals correctly• 400 AMP Heavy Duty Safety Clamps• Fits all batteries…top or side post terminals• Eliminates shocks and sparks• Copper Clad Aluminum Wire• Includes vinyl zipped storage bag

Smart Plug Professional Booster Cables

55




BATTERY SERVICE

BPES2500K

12 VOLT BOOSTER PAC• Boost Rate 250Amp, (900 Peak Amps)• Weight 17 lbs

$151.87

KKJNC660

JUMP-N-CARRY PRO660-1700 PEAK AMPS• Only 18 lb. 46” 4 gauge

cable. UL approved

$210.90

KKJNC4000

JUMP STARTER 12VOLT 1100 PEAK AMP• Provides 1100 peak

amps of starting power.• High impact ABS plastic

case.• Peak Amps: 1100

Voltage: 12V Battery Type: Sealed Lead Acid (AGM) Battery Capacity: 17 Amp Hour Cable: #4 Gauge Welding, 23” long

$153.85

KKJNC300XL

900 PEAK AMP ULTRA PORTABLE 12 VOLT JUMP STARTER• Features a high intensity work light, 56” cable

span, full size insulated clamps and our convenient Grip-

LockTM clamp storage system.• 900 Peak Amps. 9 Amp Hour battery.

$104.96

Truck Battery Service

KKJNC1224

12/24 VOLT JUMP& CARRY STARTER• 1700 peak amp boost at 24 volt mode• 3000 peak amps at 12 volt mode

$593.27

BPES1224

12/24 TRUCKBATTERYBOOSTER PACK• 12 or 24 volt• 2000 peak amps, 800 cranking @ 12 volts,

600 @ 24 volts$632.82

KKJNC950

JUMP-N-CARRY 950 AMPS• For Commercial Trucks

$458.48

HEAVY DUTY BATTERY CRIMPING• Patented triangular grip• Exerts equall pressure on all contact points.• 50 Different crimp setings.• No dies to replace.• 6 Gage through 250 MCM

EZB795 $172.26

BPES5000

1500 PEAK AMP BATTERY BOOSTER PACK• 1500 peak amps, 22 amp hour battery, LED

battery status indicator• 43” Heavy-duty cables cold weather rated to -20

degrees$212.31

SCPSJ-2212

PRO SERIES 2200AMP JUMP STARTERPro Series 2200 Amp Jump Starter330 Cranking Amps, 275 Cold Cranking Amps 4-Gauge, 50-inch Cables and 22 Ah Professional-Grade, High-Output AGM Battery

$219.67

SCPSJ-4424

12/24 Volt Pro Series 4400 Amp Jump Starter, 500 Cranking Amps, 415 Cold Cranking Amps, Two, 22-Ah Professional-Grade, High-Output AGM Batteries, and 2-Gauge, 55-inch Cables, Vented and Fan-Cooled Case for added safety

$565.29

PRO SERIES 3600 AMP JUMP STARTERPro Series 3600 Amp Jump Starter 470 Cranking Amps, 385 Cold Cranking Amps Two, 18-Ah Professional-Grade,High-Output AGM Batteries, 2-Gauge, 55-inch Cables

SCPSJ-1812

1800 PEAK AMPS BATTERY BOOSTER• 1800 peak amps, 280 cranking amps,

225 cold cranking amps and an 18 Ah professional grade, high output AGM Battery

• 12 volt DC power outlet, 4 gauge, 28” cables, Built-in automatic charger and Charging and charged status LED’s, Battery status LED

$179.30

12/24 VOLT PRO SERIES 4400 AMP JUMP STARTER

SCPSJ-3612 $471.98

BPES6000KE

3000 PEAK AMP BATTERY BOOSTER• Powered by (2) 17 amp hour batteries• LED battery status indicator• 54” Heavy-duty cables• Extra heavy-duty clamps with recessed jaws• DC outlet to power a variety of 12 Volt

accessories

$423.59

22 AMP HOUR HEAVY DUTY BATTERY STARTERS

Item # Item Features Sale

FJ45575 A Standard $145.83FJ45580 B Air Compressor $159.60

Heavy Duty 800 AMP Rubber-Insulated Clamps and Impact-Resistant Polyethylene Case• 12 Volt Output Socket with Over-Load Protection• Industrial Grade 4 Gauge All Copper Cables• 1700 Amp Boost Rating. Built in Maintainer & Work Light• One year limited factory direct warranty

SICS2000

900 PEAK AMP BATTERY BOOSTER• 900 Peak Amps, 250 Cranking Amps• LED Battery Status Display• 21” Cable Reach• 12V Outlet to Power Accessories

$97.44

56




PORTABLE BATTERY POWER AND CHARGERS

SCPSW-2035

12 VOLT BATTERY CHARGER12 Volt battery charger, 200/35/2 amp, Manual battery charger and engine starter with 300 amp clamps

$250.54

SCPSC-12500A

FULLY AUTOMATIC CHARGER AND ENGINE STARTER• Charges 6 and 12 Volt Batteries• 125 Amp 12V engine start – for emergency starting• 15< >40 Amp 6 and 12V rapid charge with self-

adjusting, variable charge rates and float-mode monitoring. Built in volt meter/alternator tester

$176.70

SCPSC-2030T

BENCH TOP MANUAL STARTER AND CHARGER• 200 amp - 30/10 amp manual battery charger

and engine starter, with timer $343.55

SCPSW-61224

6/12/24 VOLT BATTERY CHARGER6/12/24 volt battery charger - 6 volt 180/80/40 amp, 12 volt 250/65/35/5 amp, 24 volt 200/30/10 amp, Manual battery charger and engine starter,

$565.29

SCPS-2100MA

SUPER DUTY BENCH CHARGER/ENGINE STARTER• 100 amp/15 amp/2 amp manual or fully

automatic battery charger and engine starter.• 100 amp 12V engine start • 15 amp 12v fast charge – charges in 2 to 5 hrs. • 15 amp 6v fast charge – manual operation. 2

amp 12v trickle charge – charges a small 12 volt battery in 2 to 12 hours. 2 LED lights signal Power On and Fully Charged.

$155.18

SCPSW-2550

6/12 VOLT BATTERY CHARGER6/12 volt battery charger 6 volt125/50 amp, 12 volt 250/50/10amp, Manual battery chargerand engine starter.

$391.90

TECTM-221

OPTIMATE 5 - 2.5AMP SEALED DESULFATING CHARGER & TESTER• Immediately checks if the battery is sulfated or

not then applies ‘first aid’ to recover the battery so it can again accept a charge.

• Sealed weatherproof enclosure that includes wallmounts and the new bullet SAE

connectors with 24/7 maintenance.• Recommended for all 12V lead-acid batteries

from 7.5Ah to 120Ah.$92.21

TECTM-181

OPTIMATE 6 AMPMATIC DESULFATING CHARGER & TESTERThe 5Amp OptiMate 6 - microprocessor control

with AMPMATIC automatic current control & cell equalizing for proper initialization of new batteries.

• Very effective, with a new dual-stage RECOVERY + TURBO RECOVERY desulfating action & universal power input system from 100 - 240VAC.

$122.97

TECTM-151

OPTIMATE 3 DESULFATING CHARGER“Hook up OptiMate and walk away” - 100% safe &

effective 24/7 maintenance.• OptiMate 3+ saves neglected batteries safely

maintains the vehicle’s battery during long term storage.

• Checks if the battery is sulfated or not then applies ‘first aid’ to try recover the battery, then recharges, tests and then maintains

$61.44

OptiMate Series battery chargers have a unique ability to desulfate and permanently recover batteries that have been neglected or deeply discharged (some severly neglected batteries can not be brought back to life). The OptiMate’s unique automatic desulfation mode applies a voltage of up to 22V at a controlled low current for a maximum period of 2 hours, to recover the battery to the extent that it can again accept a charge using the more normal charging algorithm.

SCPSW-70300A

MICROPROCESSER CONTROLLED BATTERY CHARGERMicroprocessor ControlledWheel Charger OfferingTimer Controlled or FullyAutomatic Charging ofFlooded Lead Acid and AGMBatteries.• Set & Forget 20 & 40 Amp Automatic Charging• Utilizes “Thermal Runaway” Protection for Faster & Safer Charging• 70/40/20/4 Amp Charge Rates w/ 300 Amp

Engine Start

$501.56

TECTM-141DP

OPTIMATE 4 CAR AND MOTORCYCLE CHARGERDUAL PROGRAM now charges and tests

through the 12V port on motorcycles fitted with CAN-bus.

• Multi-stage desulfation saves neglected batteries

• Optimizes battery power and life• Safe long term battery care• Charge battery DIRECT or via CAN-bus

$76.82

Item # Item Peak Cable Light Charger Misc Sale

CV554 A 1700/22AHr 29” Yes Auto Starts 40 cars on a single charge $198.97CV555 A 1700/22AHr 48” Yes Auto 300 Watt DV to AC Inverter $223.59CV556 B 1700/22AHr 48” Yes Auto 300 Watt DV to AC Inverter $223.59CV557 C 1700/22AHr 29” Yes Auto Heavy duty premium battery $184.62CV558 D 900/12AHr 29” Yes Auto 10 Jumps on a single charge, only 13 lbs $106.67CV559 E 900/12AHr 29” Yes Auto 10 Jumps on a single charge, only 13 lbs $112.82

Great for use on the trail, boat, or car. Powerful enough for towing and recovery and commercial applications. All Weather Durable- drop-tested, chemical, heat and cold resistant case resists damage due to minor incidental drops.

AllStart On the Go Porta-ble Battery Jump Starting Power by CalVan

B D ECA

57




MULTIMETERS AND SCOPES

FL233AKIT

FL88VSTAND ALONE 88V MULTI METER ONLYFL885-5AKIT

• Automotive test functions including DC and AC voltage, resistance and current, duty cycle, frequency and pulse width

• Flight recorder function that records minimum, maximum and average values

• A built-in thermometer designed to measure and monitor air, surface or immersion temperatures.

• Includes: test lead set, removable sharp pointed test probes, Wide Jaw Alligator Clips, Magnetic Hanger,Temperature Thermocouple Probe, Inductive Pick-Up, back probe pins, Insulation piercing probe, and Carrying Case

$596.54

FL1587

RMS INSULATION MULTIMETER• Use for diagnosing motors, generators, cables, or switch gear• Insulation test voltages 50V, 100V, 250V, 500V, 1000V• CAT III 100V, CAT IV 600V measurement category• Includes: Remote probe, Test leads, Alligator clips,

K-type thermocouple, Hard case, Four AA alkaline batteries, Quick Reference Guide, CD Rom with Manual. This product is favored by Toyota technicians

$950.15

$504.75

AUTOMOTIVE METER COMBO KIT MULTIMETER

RMS MULTIMETER WITH REMOVABLE DISPLAY

without having to carry a separate instrument• Resistance, continuity and diode test• Low power wireless technology allows the display to be carried up to 10 meters (33 ft)

True-rms ac voltage and current for accurate measurements on non-linear signals

• Built in thermometer conveniently allows you to take temperature readings

FL374

TRUE-RMS AC/DC CLAMP METER• Frequency measurement to 500 Hz • Resistance measurement to 6000 ? with

continuity detection• Min, max, average and inrush recording to

capture variations automatically• 600 A ac and dc current measurement with

fixed jaw• 600 V ac and dc voltage measurement• Includes Soft carrying case, TL75 test leads, and

Two AA Alkaline batteries.

$432.62

FL376

TRUE-RMS AC/DC CLAMP METER WITH IFLEX CABLE• Read up to 1000 V and 1000 A in both ac and

dc modes.• Includes the new iFlexTM flexible current probe,

which expands the measurement range to 2500 A ac, while providing increased display flexibility

• Ability to measure around awkward sized conductors and improved wire access.

• CAT IV 600 V, CAT III 1000 V• Min, max, average and inrush recording to

capture variations automatically• Integrated low pass filter and state of the

art signal processing allows for use in noisy electrical environments while providing stable readings

$538.40

FL365

TRUE-RMS AC CLAMP METER• Thin, small jaw design makes it easy to get

around tightly packed wires. The detachable jaw on a flexible lead makes access to wires and viewing the display easier than ever.

• Measures current up to 200 A ac and dc with true-rms measurement.

• 600 V ac and dc voltage measurement• Built in flashlight for easy illumination and

identification of wires• CAT III 600 V safety rating

$302.83

FL381

TRUE RMS AC/DC CLAMP METER WITH REMOVABLE DISPLAY• Detachable, remote display and iFlex

flexible current probe for easier, faster, safer measurements.

• iFlex flexible current probe (included) expands the measurement range to 2500 A ac

• Wireless technology allows the display to be carried up to 30 ft. away

• Integrated low pass filter allows for use in noisy electrical environments

$673.02

FL1507

INSULATION TEST METERRepetitive or hard-to-reach testingis easy with the remote test probe• Ideal for many troubleshooting, commissioning, and

preventative maintenance applications.

Insulation test range,0.01 M? to 10 G?, insulation test voltages, 50 V, 100 V, 250 V, 500 V, 1000 V

• Save both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio. Includes: Remote probe, Test leads, Test probes, Alligator clips

$712.60

FL2063915

INDUSTRIAL 123 SCOPE METER• Oscilloscope, multimeter and “paperless

recorder in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems ScopeMeter 120 Series : As simple as one-two-three Dual-input 40 MHz or 20 MHz digital oscilloscope

• Two 5,000 counts true-RMS digital multimeters • A dual-input TrendPlot™ recorder • Connect-and-View™ trigger simplicity for hands-off operation

$2,163.38

FL116

HVAC TRUE RMS METER

$261.46

Compact true-rms meter forHVAC (heating ventilation airconditioning) troubleshooting. • Built-in thermometer for HVAC applications• Microamps to test flame sensors• Low input impedance: helps prevent false

readings. Resistance, continuity, frequency and capacitance

• Min/Max/Average with elapsed time to record signal fluctuations. CAT III 600 V safety rated

$479.52

FL4253599

VT02 VISUAL IR THERMOMETERNow, instead of the tedious tasks of taking

and recording multiple, individual temperature readings, you get the complete picture with a blended visual and thermal image of your target area.

• Detect Issues Instantaneously• Get the complete picture and can

compare readings from different dates.• Pinpoint with hot and cold markers• A picture speaks a thousand words. Pinpoint

the exact location of potential problems faster and easier.

• Document problems with Smart View® software

• Image stored to micro-SD card, easy download to PC and import into software

• Uses 4 standard AA cell batteries

$1,147.44

58




MULTIMETERS AND ACCESSORIES OE DIAGNOSTIC SCAN TOOL SOLUTIONS

OT3650

HEAVY DUTY STARTER• Allows one person to start and crank engine

while under the hood or from either side of the vehicle.

• 5’ leads made from heavy-duty, oil and grease resistant, 12-gauge wire.

$51.14

EL585K

DELUXE AUTOMOTIVE MULTIMETER KIT

$119.71

EL687

LOW CURRENTPROBE DIGITAL MULTIMETER• Applications: Low Current: Parasitic Drains, Fuel Injectors, Fuel Pumps, Primary Ignition Coils, Alternators, Voltage drops, Engine trouble shooting, Electrical Shorts, MAP sensors (w/frequency), All around electrical

troubleshooting. Test Ranges: DC/AC

$187.02

EL695

LOW CURRENTPROBE FOR GRAPHING MULTIMETERS• DC Amps 0-8A, 0-80AA (resolution .01A)• AC Amps 0-8A, 0-80A (resolution .01A)• Compatible with many lab scopes• Use to generate current waveforms• Jaw opening of 1/2 inches

$154.61

• The ESI 585K comes with a zippered soft storage case to protect and store the digital multimeter and all the

accessories. Includes two sets of test

leads, RPM pick-up, temperature probe, protective holster and instructions manual. Specifications:

• Analog Bar-graph Display and Large Digits• Measures Volts, Ohms, Amps, RPM, Frequency,

Temp., Duty Cycle, Dwell, Continuity & more.

EL698

DC/AC HIGH CURRENT PROBE - 1000 AMP• Measures 0 to 1000 Amps DC or AC• Use with Digital Multimeters, Scopes

and Charging Systems• Great tool for testing starting &

charging systems• Jaw opening is 2.125 inches• Low Battery Indication Lamp• Zero Adjust Knob• Zippered Carrying Case Included

$127.16

FLTLK282

DELUXE AUTOMOTIVE TEST LEAD KIT• Master Kit contains: TP81 Insulation Piercing

Clip Set, TP40 Automotive Back Probe Pins (five), TL224 Suregrip™ Silicone Test Lead Set, TP220 Suregrip™ Test Probe Set, AC220 Suregrip™ Alligator Clip Set, AC285 Suregrip™ Large Jaw Alligator Clip Set, AC280 Suregrip™ Hook Clip Set, Soft Case

$205.90

FLTLK281

SUREGRIP AUTOMOTIVE TEST LEAD KIT• Complete set of test and measurement

accessories designed especially for automotive specialists.

• Tested to 60 V DC$167.94

FL2670150

FLUKE-87-5/E2 KIT RMS MULTIMETER KITThe True RMS Multimeter Complete Kit with built-in thermometer which conveniently allows you to take temperature readings without carrying a separate instrument • Large digit display with bright, two-level

backlight makes the 80 Series V significantly easier to read than older models

• Correctly measures the pulse width modulated output produced by ASD’s

• Large display digits and 2 level bright white backlight for increased visibility

• Measure up to 1000 V ac and dc

$644.72

OT3991-12

HYBRID ELECTRIC SAFETY GLOVES

$188.98

EL134

FUSE LEAD AUTOMOTIVE DMM TEST LEADSAutomotive Fuse Holder In-Line Can Prevent Your

DMM’s Internal Fuse From Blowing• In-Line ATC fuse holder provides extra overload

protection• Can prevent your DMM’s internal fuse from blowing

$22.30

Hybrid Electric Safety Gloves arethe most important articles ofpersonal protective equipmentwhen working on high voltage vehicles. • Size Large Glove with Leather outer protector set.

Item # Clamp Measures Sale

FL2096998 i1010 1-600A AC rms, 1-1000A DC $484.56FL2097005 i410 1-400A AC rms, 1-400A DC $339.17

Special value kits for electrical professionals who are looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. Take accurate current readings without breaking the circuit

AC/DC Current Amp Clamp Kits

WA76600

HI-VIS VOLTPROOne handed dynamic voltage testing. • Indicates Power and Grounds. • Test the circuits ability to deliver current and

identify loose, corroded or broken wires. • Capture intermitent spikes or drops in voltage. • Min/Max Glitch Capture

$161.54

LG13803

AUTOMOTIVE DIGITAL MULTIMETER KIT• Inductive pickup for accurate RPM

measurement• K-type temperature probe for

measuring AC/heat/coolant• Temperature adapter for use with

various specialty probes on the market

$133.97

LG13804

CAT IV DIGITAL MULTIMETER• CAT IV 600V / CAT III 1000V allows

user safety, especially on HEV work• High voltage LED test function

allows for testing on LED lighting• Includes complete accessories to

get most tests done correctly

$319.08

ELTMX-589

TRUE RMS DIGITAL MULTIMETER - CATIII 1000 VOLT• Includes LOADpro®

Dynamic Test Leads, 200 page Electrical Troubleshooting Book, DVD training video - Sullivan Training System, and Compass for Alternator and solenoid diagnostics

• Professional Grade True RMS Digital Multimeter - CATIII 1000V safety rating - Safe for use on Hybrids - Waterproof to IP67

$347.96

FL87-5RMS INDUSTRIAL MULTIMETER

$542.91

59




OE DIAGNOSTIC SCAN TOOL SOLUTIONS

Genisys EVO features the System 5.0 with Code-Assist™ experienced-based Confirmed Fixes™ from Identifix®, NEW USA 2012 Domestic / Asian with ABS and European 2011 software including Pathfinder, Repair-Trac®, Fast fixes™ information, InfoTech Component Information software, Automated System Test™, OBD II Smart Cable, USA Domestic and ABS/Airbag OEM vehicle cables (for GM, Ford, Chrysler, Jeep, Saturn), manuals, and carrying case. Note: Some kits will require additional products to perform some scan tool diagnostic functions

OT3829

REFLASH SCAN TOOL

• Wireless with advanced networking functions

Today’s shops must be able to re-program vehicles.

$1,562.75LAU301020432

X431 MASTER DIAGNOSTIC SCAN TOOLThe X431 Master is the

Super SPEED of the X-431 Family.

• Features multiple connectors incorporated into the Smartbox, boot-up time, navigation within the menus, and overall performance are now up to 30% faster.

• OEM Import, and strong domestic coverage, now including Key Programming for FORD

Other Features include:Module Coding, OBDII Test Mode Coverage, Adaptive Resets & Relearns, Bi-directional Controls, Immobilizer Systems,, Live Graphing and Internal Printer

• 300+ Web Updates a year and covers most Asian and European vehicles

$1,726.92

OT3874TPR

GENISYS EVO® USA 2012 KIT WITH TIRE PRESSURE RESET TOOL

Subscription Software Has You Covered Whenever You Purchase Genisys Products

Stay Updated With New Software Options In 2013

• Tire Pressure Reset tool kit includes; TPR handheld, DB25 wireless adapter, registration card, user manual for TPR and Genisys interface.

$3,495.30

LAU301020518

SENSOR SIMULATOR MODULE• Not sure if you have a faulty sensor? Simply

simulate that sensor with a known good waveform via the SensorBox and know right away!

• Create and modify all kinds of signal parameters

• Display digital voltage, resistance and frequency and print out results via the GDS.

$730.38

LAU301020519

4 CHANNEL LAB SCOPE MODULE• Boost shop efficiency with the GDS Scope Box

Module from LAUNCH! • Extensive library of known good waveforms • Waveform auto-setup on all 4 channels • Independent Ground on each channel –

Allows for clean signal without interference or potentially damaging feedback and much more

$2,307.69LAU301020522

BATTERY TESTING MODULEAdd Battery Testing capabilities to your GDS with

the GDS Batterybox module!• The Batterybox module utilizes the latest in

battery testing technologies, raising the bar for professional battery and electrical preventative maintenance.

• The Batterybox is easy-to-use, compact and portable, and with the GDS, you can view test results in full color, along with test data & report printing capabilities.

$886.54

LAU301020524

COMPUTER FLASH BOX The Launch J-Box sets a new standard for Pass

Thru devices for programming on automobiles with the OEM J-2534 application.

• Perform pass thru programming for both repairs and routine main- tenancy. The J-Box works with J2534 compliant vehicles & applications with most manufacturers: No more sending business away to the dealership!

• Exclusive Free Phone Support From J2534 Specialists. Exclusive Proprietary BMW 20-Pin Connector Included! 2-Year Warranty

$1,961.54

GENISYS ‘12 SUPER BUNDLE DOMESTIC/ASIAN/EURO/SYS 5.0

OT3421-145

GENISYS SOFTWARE KIT USA 2012 DOM AND ASIAN WITH 2011 AND EURO• 4.0 System or higher needed to operate this

software (no card included)$735.59

OT3874

GENISYS EVO® USA 2012 KIT WITH DOMESTIC AND ABS/AIR BAG CABLES

$2,939.08

OT3875GENISYS EVO® USA 2012 OBD II KIT

$1,707.69

OT3874HD

GENISYS EVO® USA 2012 DELUXE WITH HEAVY DUTY STANDARD KIT

$3,772.68

OT3421-141

• Includes, the System 5.0 software with a pre-loaded high speed 4 GB memory card

$1,038.46

OT3421-144

GENISYS 2012 SYSTEM 5.0 MEMORY CARD 4 GB• Includes System 5.0 Software and a pre-loaded

high speed 4 GB memory card$337.50

SCPINC-700A

POWER SUPPLY BATTERY CHARGERAdjustable Voltage Power Supply for Flash

Reprogramming of Computers and Fully Automatic Battery Charging. Features Adjustable Mounting Brackets Allow Placement on Above Ground Lift

• Adjustable Power Supply Voltage Output from 14.0 to 14.8 Volts and Output Current Up to 70 Amps

• Provides Clean Power for Flash Reprogramming• Fully Automatic Charging of 12V Flooded Lead

Acid, Gel and AGM Batteries, Utilizes “Thermal Runaway” Protection for Faster & Safer Charging

• Variable Charging Rates of 70/20/4 Amps

$701.81

LAU301050116

CODE READING SCAN TOOLThe CRP123 blurs the lines between a code

scanner and a professional mid-line scan tool. • Complete Domestic, Asian and European

coverage for ABS, SRS, Transmission and Engine. • Enhanced Data Stream for ABS, SRS, Transmission

and Engine. • Auto Vehicle ID, Module Search and Ultra-fast

Protocol ID. • Reads & clears codes on Engine, Transmission

(A/T), ABS, and Airbag (SRS) systems – on all makes and all models.

LAU301180018

LAUNCH PAD SCAN TOOLThe Absolute Fastest Scan Tool From

Diagnostics To Repair • Featuring Windows® 7, for a true PC tablet

experience.• Auto-ID all available vehicle systems &

modules.• Featuring the latest in OBDII wireless

Bluetooth® technology• Includes Free 30-day trial of Identifix® Direct-

Hit® Utilizing symptom & DTC information, confirmed known fixes are displayed right on the screen.

Available June 2013

Available June 2013

60




SPECIALTY EUROPEAN AND ASIAN SCAN TOOLS

LAU301050074

CRVI CODE READER AND SCAN DIAGNOSTIC TOOL• Coverage for the latest modes 1 thru 10• Performs 0xygen and Evap Tests• 2010 and newer permanent code retrieval• Refresh rate, up to two frames per second• View and graph live data - up to 4 Color Graphs

at one time. Record save, and playback up to 8 hours of live data/ Stores up to 29 different recordings. Display record & save codes; freeze frame data. Identifies VIN, reads and clears codes, I/M readiness monitor status & drive cycle verification

$172.31

CODETECH CREADERCodetech is the latestgeneration of OBD II code readers from Launch • Read/Erase Trouble Codes and Their Definitions• Freeze Frame Data, Live Data Stream in Digital or

Graph. I/M Readiness, MIL Status• O2 & EVAP Sensor Test. Read VIN. On-line updates

LAU301050062 $88.46

LAU301050079

POCKET PRO CODE READERNo need to look at a separatemanual for code definitions. Evenbetter, pending codes are alsocaptured and displayed!• Permanent & Pending Code Coverage • Code Check (Vehicle Health Indicator): Instant notifying • Freeze Frame Data, I/M Emission Readiness Monitor, MIL Indicator, and VIN ID

$57.03

AUDS708

MAXIDAS DIAGNOSTIC SCAN TOOL

$1,995.00

Generic and Manufacturer specific definitions are Built Right into This Scan Tool

AUAL301

OBDII OVER THE COUNTER DIY CHECKERCompatible with ALL 1996 and newer vehicles (OBD II & CAN)• Reads and displays Diagnostic Trouble Codes

(DTCs)• Erases Diagnostic Trouble Codes (DTCs) and

Much More• Displays Vehicle Identification Number (VIN)

$42.99

AUAL319

I/M READY LIVE DATA OBDII SCAN TOOL• Easily determines the cause of

the Check Engine Light (MIL)• Displays DTC definitions on the TFT

color screen• Includes all the standard

functions for OBDII Code scanners

$74.73

AUAL419

DTC LOOK UP I/M READY LIVE DATA OBDII SCAN TOOL• Troubleshooter code tips get

technicians to the root cause of a trouble code faster, saving diagnosis and repair time.

• Built in speaker provides audible tone every 3 minutes when vehicle becomes ready.

• Live Data - Displays complete OBDII vehicle data stream

• Includes all the standard functions for OBDII Code scanners

$94.51

AUAL519

GRAPHING, DTC LOOK UP I/M READY LIVE DATA OBDII SCAN TOOL• Supports all 10 modes of OBD II for a

complete diagnosis. • Works with all 1996 and newer vehicles

(OBD II and CAN) domestic and import. Troubleshooter code tips guide technicians to the root cause of trouble code faster, saving diagnosis, and repair time. Multilingual menu and DTC definitions (English, Spanish, and French)

$142.86 AUMD802

ADVANCE GRAPHING OBDII SCAN AND CODE CLEARING TOOLSupports all 10 test modes of the

latest J1979 OBD II test specs, including Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon. Test, On-Board Mon. Test, Component Test and Vehicle Information

$574.66

AUAL619

ADVANCE GRAPHING OBDII SCAN TOOL AND READERThe AutoLin/1’ AL619 scan tool is

built to help you determine why the Check Engine Light or the ABS warning light is on. The tool offers the same features and functions as the AL519, but comes with the added benefits of ABS diagnosis and potential fault code explanation.

$272.53

Features the Unique patented One-Click I/M Readiness Key, TFT Color Display, and Built in Speakers

AUTS401

MAXI-TPMS ACTIVATE AND DECODE TOOL

$300.00

AUAL439

OBDII & ELECTRICAL TEST TOOL• Capable of diagnosing 12v charging

systems and starting systems • Code Cause/Solution tips guide technicians to the root cause of trouble code faster

$168.13

Autel DS708 Automotive Diagnostic Scan Tool System• Extensive vehicle coverage for more than 30 domestic, Asian and European vehicle makes;• Deep vehicle system coverage for ALL electronic systems; • Complete function capability including live data, module coding, and so many others;• Unparalleled OBDII functionality–supports ALL 5 OBDII protocols and ALL 9 test modes;• Automatic Wi-Fi updates available in new software releases;

AUTS401 Use with the DS708 for a Complete TPMS Repair Solution!Unparalleled sensor coverage- activate and decode ALL magnetic,frequency, and tire deflation triggered sensors on all vehicles sold worldwide• Interpret data including sensor ID, tire pressure, temperature, and battery condition• Incredibly easy-to-use with intuitive navigation and step-by-step on-screen instructions. 1 year of free

updates via USB port

Buy Together and Save!

Extremely Easy-To-Use

Windows Based Operating

System And Wi-Fi Connectivity

AUMXCHK

AUTOBODY AND MECHANICAL SPECIALTY DIAGNOSTIC TOOLAids in repair of Engine, Transmission,ABS, EPB, Airbags, TPMS, Oil Reset, Climate Control,

and Steering Wheel service. • Covers over 40 Manufacturers• Replacement and re-calibration of the brake

pads $641.03

AUAL539

OBDII & ELECTRICAL TEST TOOL• Easy to read AVOmeter allows

you to test voltage, current, resistance, wiring, switches, duty cycle and more, measures up to 20 AMPs • Capable of diagnosing 12v charging systems and starting systems • Internet updateable and upgradeable

$202.20

• Quickly pinpoints sorce & location of noise• Wireless Channel Receiver isolates up to 4 different transmitter locations• LED lights indicate the strength of signal of

the active channel• Listen to noises with the built-in speaker or

connect through headset plug

JS06600

STEELMAN CHASSIS EAR• Versatile six–channel• EngineEAR helps to pinpoint noise and location

$147.67

$298.08JS97202

WIRELESS CHASSIS EAR

61




OBDII SPECIALTY DIAGNOSTICS & EVAP SMOKE MACHINES

EZOBD2L

LED OBD LIGHT ATTACHMENT• Attaches to the scan tool OBD connector and

illuminates the car port to easily connect without pin damage

$17.63

IV31603

ABS/SRS + OBDII® SCAN TOOL• Professional OBD2

Generic Scan Tool for all 1996 and newer cars, light trucks, and SUVs – Domestic, Asian and European Import

• Reads & erases ABS & SRS codes on the most popular 1996 and newer GM, Ford, Chrysler, Toyota and Honda vehicles

• Automatic refresh updates data every 30 seconds when connected to the vehicle

• Comes with access to pro.Innova.com RepairSolutions

$336.54

MTV500-0100

MOTORVAC COOL SMOKE EVAP MACHINEThe patented ‘Cool Smoke’ process does not use a heat source to generate it’s UV dye enhanced smoke.• Features a dual mode leak detection feature. • Provides the option of testing for leaks with or

without smoke. Automatic shut-off• Pressure and vacuum leak diagnostics• Includes a complete accessory kit

$1,109.93

OT3111

TRILINQUAL OBDII CAN AND ABS TOOL• CodeConnectTM Revolutionizes vehicle repairs.• Prioritize troubleshooting with the Top Reported

Fixes • Record and playback LIVE engine data• Display LIVE real time data• Enhanced code request for GM, Ford, Chrysler

and Toyota vehicles$187.62

3 Million Verified Fixes At The Touch Of A Button

VACEELD601

EVAP-APPROVED SMOKE MACHINE• Auto-Correct EVAP pressure - not

adjustable to avoid possible pressure damage to vehicle

• Works with nitrogen or shop air to meet all OEM test requirements for all makes and models

• Free refill of UltraTraceUV® ultraviolet smoke solution, good for about 2-years of testing

$1,431.79

VACEVAPRO2000E

EVAP-APPROVED SMOKE MACHINE• UltraTraceUV® solution

deposits a fluorescent dye at the exact location of the leaks.

• Will not void OEM factory warranty• Nitrogen-based for safer EVAP testing which

meets automaker test requirements & uses shop-air for general purpose leak testing

$2,045.13

IV30203

OBDII CARSCAN CONFIRMING DIAGNOSTIC CODE READER™• Perfect entry-level tech

tool where nothing more than basic diagnostic and repair verification information is needed.

• Work on all 1996 and newer cars, light trucks, SUVs and minivans – Domestic and Import including the newest OBD2 compliant diesel and hybrid vehicles.

$62.75

IV31003

OBDII CARSCAN DIAGNOSTIC TOOL™ • Comes with OBD2

Live-data stream functionality to help in the diagnostic and repair verification process

• Work on all 1996 and newer cars, light trucks, SUVs and minivans


$147.10

IV31403

OBDI AND II CARSCAN DIAGNOSTIC INTERACTIVE SCAN TOOL • Designed to

retrieve Enhanced and Transmission diagnostic codes in all OBD2 (1996 and newer) and some of the most popular OBD1 (1981 to 1995) vehicles

• Automatic refresh. Comes with 15 inspection maintenance monitor coverage which is a great way to verify repairs have been completed and the vehicle has run through its complete drive cycle.


$336.54

IV31703 CARSCAN OBDI AND II SRS/ABS DIAGNOSTIC INTERACTIVE SCAN TOOL

Designed to retrieve Enhanced and Transmission diagnostic codes in all OBD2 (1996 and newer) and some of the most popular OBD1 (1981 to 1995) vehicles• Reads & erases ABS & SRS codes on the most popular 1996 and

newer GM, Ford, Chrysler, Toyota and Honda vehicles• Displays, records and plays back OBD2 live data graphing on

the tool• Automatic refresh updates data every 30 seconds when

connected to the vehicle. Features 3 color LED display for quick State Emissions readiness check

• Comes with 15 inspection maintenance monitor coverage to verify repairs have been completed through its complete drive cycle.

• Displays Freeze Frame Data that displays a multiple P.I.D. snapshot of the vehicles condition when the code was set

Use the ASE Bi-Lingual Toll Free Tech Support Line for Instant Repair Advise

EVAP SMOKE MACHINE• Large full range flow meter – Detects .020” & .040 EVAP leak sizes• Variable Smoke Flow – Helps pinpoint smoke exiting a leak UV or standard testing• Can be used with air or nitrogen

$528.83

OT6522 $1,313.54

IV3130C

OBDII DIAGNOSTIC CODE SCANNER WITH FIX ASSISTAn Incredible Enhanced

scan tool loaded with a database of verified repairs. This repair information easily guides you to the problem

• Retrieves a list of diagnostic trouble codes (DTCs) and code definitions from your vehicle’s computer.

• Fix Assist functionality allows you to view freeze-frame data, live data, and ABS codes to pinpoint your vehicle’s problem.

• Retrieve diagnostic codes in all OBD II vehicles 1996 and newer, including 2010 and later Blue-Tech diesel vehicles and hybrids.

• Playback the information to scrutinize all the data and make a clear diagnosis.

$285.21

62




SPECIALTY DIAGNOSTICS

PPECT2000

ELECTRICAL WIRE FAULT DETECTOR• Simply connects to any electrical circuit on the vehicle.• Shows the direction of the short circuit to

eliminate guess work.$165.68

PPPPKIT03

POWER PROBE 3 MASTER KIT, W/ GOLD LEADS AND SHORT FINDER• Includes the PP319,

LS01 Gold Test Lead Kit and the ECT2000.

$365.74

EL328

EZ TACH + PLUS• Reads engine revolutions from 0 to 20,000 RPM• Picks up RPM signal wireless or with supplied

inductive pickup• Built-in LED Flashlight which can be used while

taking measurements, Accuracy +10 RPM

$70.57

PPPP3LS01

POWER PROBE 3 WITH GOLD TEST LEAD SETFeatures the PP319FTC and Gold Test Lead Set

Packed in One Comprehensive Kit

$229.03

SFTA500

MULTISYSTEM ENGINE ANALYZERPerform quick and reliable diagnostics of non-

starts, misfires, fouled up or damaged spark plugs and/or spark plug wires

• Compare digital read-outs of the spark plug voltage and spark burn time between cylinders on engines using Coil on Plug, Coil near Plug, conventional distributor/ignition coil, DIS (Distributor-less) or waste spark and magneto technologies.

• Special antenna sensor allows quick testing of Coil on Plug and Coil

$368.62

IV5568

4 FUNCTION DIGITAL READOUT TIMING LIGHT• Tests Tach, Advance Degrees, Dwell, and Volts • Patented Skip Circuitry Tests Up to 9,990 RPM.• Unit Can Switch From 2-Cycle Distributor less

(DIS) to 4-Cycle Conventional Ignition Systems• Uses Detachable 6 Foot Leads With Insulated

Wire and Heavy-Duty Battery Clips With Metal Inductive Pickup

$161.54

SFST05

OXYGEN SENSOR TESTER SIMULATORPerform diagnostic tests andmeasurements on any OxygenSensor to quickly determine whetheror not an Oxygen Sensor is actually defectiveand in need of replacement.• Diagnose “Lazy” sensors which may not trigger

DTC’s but cause drivability problems • Sensors can be tested either ON or OFF vehicles. • Instant PASS/FAIL results displayed

$164.84

Item # Color Sale

PPPP319CAMOFTC Camo $153.80

PPPP319CARB Carbon $153.80

PPPP319FIRE Fire $153.80

PPPP319FTC Misc $153.80

Power Probe 3 Kits• Power up components right in your hand. • Instantly check components for continuity as well as identify positive, negative and open circuits without re-polarizing hook-up clips.

EL230

SETTABLE AMP SHORT FINDERSHORT BUDDY® Helps you to Locate Shorts To

Ground. Intermittent shorts• Intermittents caused by loose connections• Settable Amp Levels of 10, 15, 20, 25 and 30 Amps• Automatically opens the circuit in event of

overload$157.50PPRPPH1

HOOK MULTI TESTERFix Cars With Pinpoint Accuracy!• 20 ft. lead makes it easy to test the vehicle from

front to rear without constantly looking for a ground hookup.

• Load tests power and ground connections.• All the functions of the PP3 and much more

$475.00

A

DEARZ1204

PROFESSIONAL CORDLESS INSPECTION CAMERA

$290.75

DEARZ604

VIDEO INSPECTION CAMERA• Uses 6V Alkaline-Battery - 8mm

head standard• 2M length cable (6’+) with 3”

color LCD display• Video out (RCA cable)• Up to 14 hour run time battery

change

$172.29

Non Corrosive Liquid Proof flexible cable protects camera head

• 5-setting LED Light control coupled with adjustable image zoom to

provide great image quality. 8mm head 2M length cable • 3” color LCD Screen 320x240 hi res• Video out (RCA cable)• 16 hour run time per charge shows battery levels• Comes with 1 battery / charger / carry

case

AUMV400-55

Records and plays video or still images from internal memory and can stream directly to a PC (Optional SD card can be used)• 39.4” liquid proof viewing wand• 3.5” Color LCD and auto focus with LED spot

to illuminate viewing area• 5X Digital zoom. Recargeable Li-Ion internal

battery$253.85

5.5MM DIGITAL RECORDING RECHARGEABLE VIDEO SCOPE

AUMV208-55

5.5MM DIGITAL RECORDING VIDEO SCOPE • Record digital still images and MPEG2 or MPEG1 video either on its internal flash memory or on the removable SD cards (optional). • 2.4 “ high resolution full color LCD display (320x240) • Wide camera angle for in images with 640x480 resolution• 5x digital zoom for increased viewing • Mini USB connector for uploading images and videos to a computer • Powered by 4 AA batteries (Not included)

$228.57

B

B

63




TPMS, TERMINAL TOOLS AND SPECIALTY DIAGNOSTICS

Item # Item Pieces Application Sale

JS95839 A 19 Universal $192.92JS95926 B 5 BMW $82.03JS95927 C 6 Mercedes $106.67JS95928 D 10 Audi/VW $125.54

JS95929 E 12 Popular Euro $139.49

Easily removes terminals from electrical connectors and eliminates damage to wires and terminal blocks. Handles are individually marked for easy identification against application chart. Mostly used on import vehicles.

Terminal Removal Tool Kits

B

D E

C

A

BARWRT400SD

TPMS R&R SCAN TOOL WITH RELEARN• Make-Model-Year menu system• Displays the OEM sensor part number, displays

the pressure at each wheel location, warns of a wrong sensor installed, missing or faulty sensor, duplicate ID, and incorrect sensor mode

• Easily updates. Decodes and displays critical sensor data, including sensor ID, PSI, battery state, and temperature!

• Programs sensor ID’s directly to vehicle on Asian Makes!

• Programs the EZ-sensor® by Schrader.• Checks Key FOBS and other RF signals.

$1,730.67

SFTA100

SMARTACH+ WIRELESS IGNITION ANALYZER AND TACHOMETER• Wide measuring range:

200 to 19,999 RPM• Wide distance from the antenna to ignition system

measuring range for tachometer function• Quick and easy selection of No. of cycles and No. of

cylinders. Displays maximum and minimum readings in real time

$209.47

VT55 OBDII TPM PROMO MEGA KITTest wheel sensors and reset the TPMS light on Domestic, European and Asian vehicles. 98%+ coverage (multilingual) • Required for many tire rotations or sensor

replacements. • Easiest TPM diagnostic tool to operate • Selection of vehicle make only needed • Duplicate sensor warning • Auto detection, RF detection • Easily updatable, Internal Li-Ion battery.

LS57750

TERMINAL TOOL SET WITH HANDLE• Set of Three Terminal Tools and Handle for

Removing Wires from Terminals on GM/Ford Without Damage.

• Handle slips over the probes to protect the technician’s hand as well as to provide extra leverage.

$51.98

AQVT55VB01PG01 $1,620.51

KN29980

TPMS SENSOR REBUILD KIT• No Need to Replace Stripped or Time Corrosion

TPMS Sensors!• Fast. With a little skill, a service technician can

install a new valve stem in 10-15 minutes.• 25 repairs can equate $1000 in Labor Profits

$203.84

AUTS101

UNIVERSAL TPMS SENSOR ACTIVATION TOOL• Simply press the activation button to activate

tire pressure monitoring system sensors to reset or relearn the sensor ID to the vehicle.

• Universal TPMS tool with just two buttons to activate all existing 125 KHz LF wake-up TPMS sensors

• Tool indicates when LF signal stream is powered on.

$118.68

AUTS501

MAXITPMS TOOL

$1,186.73

AUTS601

TPMS PROFESSIONAL COMPLETEThe MaxiTPMS® TS601 is the most powerful

TPMS diagnostic & service tool in the world capable of fully diagnosing TPMS problems as well as activating TPMS sensors and reprogramming the vehicle’s ECU.

• Activates ALL magnetic, frequency and tire deflation triggered sensors using 125KHz continuous or modulated wave signals

• Receives both 315MHz and 433MHz signals• Reads / writes sensor ID from vehicle ECU• Reads / clears codes of TPMS system and

resets malfunction indicator light• Reads activated sensor data including

sensor ID, tire pressure, temperature, battery condition, OE part number, relearn information

• Reads, records and playbacks TPMS live data, including tire pressure, signal status, temperature, battery status, etc.

• Retrieves TPMS ECU information• Performs actuation tests and special

functions• Programs vehicle ECU to learn sensor IDs and

positions• Checks Remote Keyless Entry (Key FOB) for

transmissions• Graphs vehicle with 4 or 5 wheels to simplify

the diagnostic process• Pre-selection process offers faster activation

and diagnostics• Proper LF signal to prevent being fooled by

other RF signals• Built-in rechargeable Li-polymer battery• Multilingual support: English, French, and

Spanish, etc.• One year free update on the internet via USB

port

$1,332.69

The MaxiTPMS TS501 TPMS diagnostic & service tool is specially designed to activate any known OEM / Universal TPMS sensors, reprogram the vehicle’s ECU, and turn off warning lights.

• Reads / Writes sensor ID from vehicle ECU• Reads / Clears codes of TPMS system and

resets malfunction indicator light• Reads activated sensor data including

sensor ID, tire pressure, temperature, battery condition, OE part number, and relearn information

• Provides visual and audible responses to confirm sensors are working properly and more...

64




REPAIR MANUALS AND SPECIALTY ELECTRICAL

LS59600

DEUTSCH TERMINAL TOOL• Works on OEM Electrical Connectors Used on

Trucks and Equipment Such as Caterpillar, Kenworth, Peterbilt, Freightliner, Mack Harley and More.

$28.35

EL190

OFF-THE-CAR RELAY TESTERRelay Buddy is a quick go / no-go tester for themost common automotive relays.• Fails bad relays. Settable to 4 and 5 pin relay• Automatic test with Good/Bad indication• Switch contact are loaded to detect excessive

resistance. Uses vehicle 12V battery for power

$74.26

AA13-340 2013 Domestic Trouble Codes $91.58

AA13-350 2013 Import Trouble Codes $91.58

CB978-1-285-19293-2 2013 Labor Guide Manuals Dom/Imp $246.11

CB978-1-285-19296-3 2014 Labor Guide CD Dom/Imp $256.37

LS56810

RELAY TEST JUMPER KIT• Set of Four Relay Test Jumpers Make Testing

Relays or Live Circuits Quick and Easy. • Set includes four jumpers to fit the most

popular size relays on domestic and import vehicles.

• No need to pierce wires or connect multiple jumper wires. Jumpers have tabs for clamping and flat pads to place test leads on.

$70.61

CHILTON’S Item Gauge Sale

TA18880 14, 16 & 18 $41.69

TA18890 20 & 22 $41.69

LS60610

RELAY JUMPER TEST KIT IISet makes testing relaysor live circuits quick and easy.• Set includes four jumpers to fit many popular relays

on Honda, Nissan, Toyota, newer Ford and GM mini micro relays as well as International trucks.

$70.61

IP8040

DIAMOND GRIP TERMINAL CLEANERSThe 3-piece set, features a highly-durable and

abrasive coating for cleaning small spade pin electrical connectors.

• For flat and spade style terminals• Includes a holster for small, medium and large

cleaners$39.08

LS60660

DELUXE RELAY TEST KITIncludes 8 Jumpers to Fit Most Popular Relays • Jumpers have tabs for clamping and flat pads

to place test leads on. • No need to pierce wires or connect multiple

jumper wires.• Includes Test Lead Kit for easily and securely

connecting Relay Test Jumpers to a multimeter. • Relay Puller Pliers easily remove electrical relays

without damage to the relay or electrical box.

$176.53

LS27430

24 VOLT HEAVY-DUTY CIRCUIT TESTER• Quickly Tests Voltage up to 28 Volts.• Heavy duty side insulated probe,

$16.53

DELUXE RELAY TESTER KIT• Features easily accessible

ports for use with other diagnostic tools.

• Can jump the relay to power up componants

• Kit includes the tester, 6 popular relay leads, 1 universal relay lead. Works with both 12 and 24 volt systems.

CV76 $153.85

Domestic & Import Code Manuals

OT4460

2 PIECE ELECTRICAL CONNECTOR TOOL• Release locking tabs on electrical connectors • Eliminates damage to the tab or connector.

$19.08

OT4461

TERMINAL RELEASE TOOL SET• Repair or rebuild

awring harness without having to order an OE replacement.

$52.51

OT4468

9” SELF ADJUSTING WIRE STRIPPER• Strips the insulating sheathing from wires

ranging from 10 ga. to 22 ga.

$19.08

OT4782

WIRE PULLING TOOL• Wires or connector can

be hooked to the end allowing the wiring to be pulled through.

$15.54

Crimps Deutsch closed barrel terminalsfound on newer domestic vehicles, trucks, and

off road equipment• Ratcheting action provides perfect crimp

Deutsch Closed Barrel Terminal Crimpers

Deutsch terminals are found throughout the industry on trucks, motorcycles, race cars, agricultural and marine equipment where excessive vibration can potentially destroy standard electrical connections.

TA18550

DEUTSCH TERMINALS RELEASE TOOL KIT• Use to release Deutsch terminals from connectors• Provides coverage in three wire gage ranges:

14-16, 16-18 & 20-24• All metal construction with knurled anodized

aluminum handles &$41.69

TA18600

OPEN BARREL CRIMPING TOOLCrimps most open barrel terminals such as

Deutsch, computer sensor and Weatherpack• For wire sizes 14-24 gage

$26.86

TA18650

DEUTSCH TERMINALS SERVICE KITCrimp and Release Deutsch

Terminals with Ease• Crimps both: open and

closed barrel terminals sizes 14-16, 16-18 and 20-22 gage wire

• Includes release tools, large and small ratchet style barrel crimpers, and open barrel crimper for computer sensor and Weatherpack terminals

$135.65IV3396

MULTIMETER TEST LEAD SETComplete DMM accessory kit for electrical or

electronic applications.• Compatible with all Digital Multimeters

$106.67

65




CIRCUIT TESTERS PROBES AND WIRE TOOLS

Mechanics Test Tools

TA27000

LIFETIME HEAVY DUTY CIRCUIT TESTER• Heavy Duty Circuit Tester

$6.79

TA19000

WIRE STRIPPER• Automatically adjusts• Cuts and strips solid orstranded 12-22 gage wire

$22.92

TA18950

WIRE STRIPPER, CUTTER AND TERMINAL CRIMPER• Automatically self-adjusts to strip solid or

stranded 10-26 gage wires$21.02

TA18930

RATCHETING TERMINAL CRIMPER FOR WEATHER PACK TERMINALS• Weatherpack terminals and non insulated

open barrel connectors 22-10 AWG.$42.64

TA18900

RATCHETING TERMINAL CRIMPER• Crimps 10-22 gage wire• Ratcheting action ensures a perfect crimp

$30.57

TA23000

UNIVERSAL TEST LEAD KIT• Contains all the necessary connectors and wire

to use as jumper leads or to test a wide variety of automotive electrical and electronic circuits

$51.91

TA23150

PERMA COIL JUMPER LEAD• Extend to 10 feet, retract

to 2 feet$19.05

TA27300

CIRCUIT TESTER WITH 12’ RETRACTABLE WIRE/BATTERY CLIP• Quickly and easily checks electrical circuits

and accessories on 6 and 12 volt systems$9.73

TA18960

QUICK CHANGE RATCHETING TERMINAL CRIMPING KIT

$107.71

• Includes 7 Die Sets for the most popular automotive terminal crimping applications.• Ratcheting action ensures a perfect crimp

every time.

WA77065

20 PIECE GOLD MASTER TEST LEAD SET IN ORGANIZED CASE• 8’ Right Angle Ultimate Test Lead Set• 8’ Universal Great Jumper Leads Set, 4 Screw on

Alligator Clips • Screw on Bed of Nails Set, Bullet Wire Piercing

Probe Set and 4” Flexible Back Probe Set$163.65

Retractable and Magneticback test leads. 18 gauge copper wire.KS1129 3 Leads x 10 ft $20.57

KS1130 1 Lead x 30 ft. $18.25

KS1135 3 X 10-ft $29.45

KS1137 2 X 30-ft $35.47

KS1138 2 X 30-ft $43.47

KS1140 2 X 10-ft $18.13

Item Pc Sale

LS64750 11 $33.08

LS64900 17 $50.11

TA19100

RECESSED AREA WIRE STRIPPER AND CUTTER• Narrow profile can easily access limited and hard to

reach areas• Strips 22-12 gage single or

multiple stranded conductor wire

• Automatically adjusts to wire size• Adjustable strip length gage

Built-in wire cutter$21.90

TX490X

EXTENDED BACK PROBE KITProbes slide along wireinto the connector toback probe circuit No need to disconnectthe connector or terminal • Includes color coded back probes wired to a

connection clip$41.12

TX490

COLOR CODED BACK PROBE TEST KIT• Sharp, small diameter probes slide along wire into connector to back probe circuit.• No need to disconnect connector and terminal.• Kit contains 20 pin-type back probes in five

different colors.$29.01

TX490-M

90 DEGREE HEAVY DUTY BACK PROBE KIT• Assortment of back probe pins which gives the

technician access to the back probe circuit without any obstructions.

• Longer pins to reach circuits that were previously unreachable. (10) Straight Pins. (5) - 90 Degree Pins. (5) - 45 Degree Pins

$37.01

EL315

MAXI FUSE BUDDY KIT

$122.09

• MAXI test applications include: Anti-Lock Brake Circuits, Car Stereo Circuits, Power Distribution Circuits, Branch Circuits and more• Measurement range: 0 to 80 Amps / 48 Volts DC

IP8042

12 PIECE FEMALE BULLET CONNECTOR CLEANER SET• Sizes .030” to .120”, are specially designed to

clean Cannon, Deutsch, Bullet, and other Round Pin Female Terminals.

• Commonly used in automotive, truck, industrial and military-type applications

• Many other uses!

$50.27

An assortment of straight, 45°, and 90° back probe pins with standard 4mm female banana plug connectors

• 17 pc. kit 64900 adds six .040 diameter pins. For use up to 30 volts.

TA18980

MASTER RATCHETING TERMINAL CRIMPER SETIncludes 9 Die Sets • Quickly and easily

change Die Sets with the press of a lever

$136.66

Back Probe Test Kits

66




PARTS ASSORTMENTS AND ACCESSORIES

Poplular Parts Assortments

PMW5200 200 Piece Spring Assortment $7.55

PMW5201 270 Piece HNBR O-Ring Assortment $9.09

PMW5202 407 Piece O-Ring Assortment $15.48

PMW5203t 419 Piece Metric O-Ring Assortment. $16.31

PMW5205 560 Piece Cotter Pin Assortment $8.90

PMW5208 300 Piece E-clip Assortment $8.50

PMW5212 300 Piece Snap Ring Assortment $8.12

PMW5213 160 Piece Wire Terminal Assortment $14.65

PMW5214 125 Piece Rubber Grommet Assortment $8.88

PMW5215 70 Piece Grease Fitting Assortment $13.02

PMW5216 350 Piece Lock Flat Washer Set $6.65

PMW5218 720 Piece Washer Assortment $6.77

PMW5219 150 Piece Wing Nut Assortment $11.24

PMW5220 200 Piece Hex Head Drill Screw Asst. $9.30

PMW5221 347 Piece SAE Nut & Bolt Assortment $6.20

PMW5222 347 Piece Metric Nut & Bolt Assortment $6.20

PMW5223 600 pc Home Hardware Assortment $5.73

PMW5226 1200 Piece Nut and Bolt Assortment. $36.12

PMW5225 900 Piece Spring & Cotter Pin Assrt $47.31

PMW5228 500 Piece Rivet Assortment Set $12.92

PMW5340 120 Piece Roll Pin Assortment $8.09

PMW5348 26 Piece Hose Clamp Assortment $7.62

PMW5353 1000 Piece Cotter Pin O’ring & Spring Assortment $53.56

PMW5368 120 Piece Fuse Assortment ATC. Fuse Sizes $12.02

Assorted CounterDisplays


PMW1901 Folding Scissors Display (50 Per Display) $2.27

PMW1903 Inspection Mirror Display (25 Per Display) $1.70

PMW1904 Magnetic Telescoping Pick-Up Diplay (30 Per Display) $2.22

PMW1906 Spark Plug Gap Gage Display (200 Per Display) $0.71

PMW1908 Magnetic Pickup Display (25 Per Display) $2.25

PMW1909 Teflon Tape Dump (24 Per Display) $0.71

PMW1913 72 Piece LED Key Chain Bucket Display $2.22

PMW1925 Pencil Style Tire Pressure Display (25 Per Display) $1.54

PMW969 30 Piece D Clip Holder $1.09

PMW972 35 Piece Razor Knife Display Bucket $0.85

PMW984 2 in 1 Screwdriver $1.04

PMW986 Mini Nylon Spring Display) $0.73

PMW993 30 Piece Mini Razor Scraper Display Bowl $1.25

Assorted CounterDisplays

Merchandisers Must Be Ordered In Display Quantities

Item # Size Fits Sale

TZ32990 Brass Pad Lock 24 $4.53

TZ32995 Breakaway Knife 36 $0.88

TZ33000 Nail Clipper 24 $0.90

TZ33003 Single Edge Scraper 36 $2.51

TZ33005 Folding Knife 24 $3.25

TZ33006 Multi Color D Ring 12 $1.12

TZ33008 Battery Terminal Cleaner 12 $2.59

TZ33033 Tweezers 36 $1.03

TZ33043 LED Key Ring Flashlight 24 $2.59

TZ33046 Utility Knife w/Key Chain 24 $2.11

TZ33048 Tire Gage 24 $2.24

Order Quantities Display Ea.

Tool and Gadget Assortments

TZ45232

24 PIECE MAXI BLADE ASSORTMENTContains 3 each fuse assortments:• 20A (Yellow), 30A (Green), 40A (Orange), 50A

(Red), 60A (Blue), 70A (Tan), 80A (Clear), 100A (Purple)

$25.01

TZ45230

88 PIECE MASTER AUTO ASSORTMENT• 5ea Mini Blade Fuses: 3A (Violet), 5A (Orange),

7.5A (Brown), 10A (Red), 15A (Blue), 20A (Yellow), 25A (Clear), 30A (Green)

• 5ea Blade Fuses: 3A (Violet), 5A (Orange), 7.5A (Brown), 10A (Red), 15A (Blue), 20A (Yellow), 25A (Clear), 30A (Green)

• 1ea Maxi Blade Fuses: 20A (Yellow), 30A (Green), 40A (Orange), 50A (Red), 60A (Blue), 70A (Tan) 80A (Clear), 100A (Purple)

$19.71

TZ4522996 PIECE MINI BLADE ASSORTMENT

$14.20

TZ45227

96 PIECE BLADE ASSORTMENTContains 12ea fuse assortments:• 3A (Violet), 5A (Orange), 7.5A (Brown), 10A

(Red), 15A (Blue), 20A (Yellow), 25A (Clear), 30A (Green)

$11.58

67




MAGNETS, MIRRORS AND PICKS

MH60003

4 PC “MINI” DOMINATOR® SET• Scratch all, 90Degree, Curved and Complex

hook Blades• Composite, patented, ergonomic handle for

comfort and secure grip.• Blade extends full length of tool to end cap.

$18.70

ULCHP6L

6 PIECE LONGHOOK AND PICK SET• Cushioned grip handle

$18.35

ULCHP8L

8 PIECE HOOK AND PICK SET• Cushioned textured grip will not slip in wet or oily

hands Total length 9.75”

$24.46

ULCHP4L

4 PIECE LONG HOOK AND PICK SET• 4 Piece Long Pick Set

$12.24

TA13850

7 PIECE UNIVERSALHOOK AND PICK SET• 7 Different and distinct plated hooks and picks

with high impact plastic handles.• Longer picks are 8 1/2” overall length and

shorter picks are 5 1/4” overall length.$37.08

TA13950DOUBLE POINTED SCRIBER/HOOK

$4.93

TA13900

MINI PICK ANDHOOK SCRIBE SET• Mini Pick Set

$10.09

TELESCOPING PICK-UP TOOLS AND MIRRORS

Item # Description Sale

ULHTC-2LT 2-3/8” Lighted Inspection Mirror, telescopes from 6-3/4” to 37” $16.29

ULHTE-L2LT 1-3/8” Lighted Inspection Mirror, telescopes from 6-3/4” to 35-1/2” $14.84

ULHTLDISP Includes 3 Each of ULHTC-2LT, ULHTE-L2T, ULHTLP-1, ULHTLP-2, and ULHTS-2LT $241.97

ULHTLP-1 Lighted Magnetic Pick- Up Tool with Powercap and Rotating Head, Telescopes from 6-3/4” to 27-3/4”, lifts 8 LBS. $18.26

ULHTLP-2 Lighted Magnetic Pick Up-Tool, lifts 8 LBS., sides will not attach Unwanted metal surfaces, telescopes from 8” to 32-3/4”. $15.27

ULHTS-2LT 3-3/8” Lighted Inspection Mirror, Telescopes from 6-3/4 to 30-1/4” $19.34

KD84000

7 PIECE HOOK AND PICK SET• Set includes Cotter Pin Puller, Hose Pick Puller,

Awl, Mini Full Hook, 90 Degree Mini Hook, Straight Mini Hook, and Mini Offset Hook

• Dual material cushion grip handles for added comfort and leverage

$40.07 KD84040

• Set includes 3-1/8” Mini Full Hook, 90 Degree Full Hook, Straight Mini Hook, and Mini Offset Hook


$26.70

ULHTK-2LT

RECTANGULAR LIGHTED INSPECTION MIRROR• Rectangular Inspection Mirror with three

Rotating LED Lights.• 3-1/2” x 2-1/4” Lighted Inspection Mirror with

three LED lights that can be adjusted to needed angle for inspection in tight dark areas.

• Telescopes from 6-3/4” to 30”. Lithium Batteries included

$17.32

4 PIECE MINI HOOK AND PICK SET

TA13920

LONG REACH PICK & HOOK SET• 8 piece set to install and remove “O” rings;

pierce; retrieve small parts; separate wires; pull small fuses; scribe and align.

• Each piece has an overall length of 9” $21.27

TA13820

BIG HOOKER SET• New style ergo grip features non-slip material

that offers more concentrated pulling power.• Great for removal of radiator hoses from inlets,

outlets and clamps and cotter pin removal.$25.93

ULCHP4-LT

LED HOOK AND PICK SET• Working end of the picks are directly illuminated

by the high intensity LED. • Sets include a ninety-degree, hook, complex,

and straight pick. $32.59

ULMG-2LT

LED TELESCOPIC MAGNIFYING GLASS• Two-inch viewing diameter, with a 4x magnifying

strength. • 37-1/2” telescopic reach, LED lights

$18.75

ULHT5-30PK

30- PIECE DISPLAY POCKET MAGNETIC PICK-UP TOOLSNeon color display, with (10)

each orange, blue and green pick-up tools

• Tools feature Powercap® no stick side and 2.5 lb pick up

$117.70

MH60027

X-LONG DOMINATOR HOOK AND HOOK SET• Includes c-hook, complexhook, cotter pin puller and 90 degree hook.• Patented Dominator handle with stock that goes to

the handles end for maximum impact & durability$90.42

68




MAGNETS, MIRRORS, PICKS AND RADIO TOOLS

MH60002

DOMINATOR 6PIECE HOOK SET• Each hook is formed to fit into tight area,• Contains: C-Hook, 15 Degree Hook, 45 Degree

Hook, 45 Degree Long Hook, 60 Degree Long Hook & 90 Degree Long Hook”

$119.26 OT4711

DELUXE RADIOAND ANTENNA SERVICE KIT• Deluxe Radio and Antenna Service Kit

$68.66

OT4712

EUROPEAN RADIO REMOVAL TOOL KIT• Includes the tools to remove the radio on the

following European vehicles: BMW, VW, Audi, and Mercedes-Benz.

$26.07

TA13860

HOSE REMOVAL TOOL• Great for the removal of rubber hoses from inlets, outlets and clamps.• Specially designed end makes hose removal

easy. Large, comfortable handle.• Hardened and plated shaft. 8½” overall length

with 4” exposed shaft.

$4.93

MAGNETS AND MIRRORS WITH CUSHIONED GRIPSMirrors feature all-angle ball joint to function firmly for 360 ° viewing. Magnets feature shafts that can be easily bent at any angle to retrieve dropped metal objects in hard to reach areas. Stainless steel telescoping handles are strong, long & lightweight. Comfortable textured cushion grip keeps handle secure in wet or oily hands.


ULHTC2 2-1/4” Round Mirror Inspection Tool With Coated Handle $10.57

ULHTC2LM 2.25” Magnifying 51” Telescoping Inspection Mirror $13.78

ULHTE2 1-1/4 Telescoping Inspection Mirror $10.00

ULHTS2 3.25”” Round 29.5” Telescoping Clear Glass Mirror $12.24

ULHTS2L 3.25” Telescoping 52.5” Inspection Mirror $14.04

ULHTDISP Mirror & Magnet Display Case. Holds 3 Each. $207.79

CUSHIONEDGRIP

ULHTC2

ULHTC2LM

ULHTE2

ULHTS2ULHTS2L

ULHT2FL

ULHTC2FL

ULHTDISP

MH60000

4 PIECE DOMINATOR PICK SET• 10” long, capped end for striking. • Two-composite ergonomic handle enhances

pulling, turning and striking power$49.87

SK6090

4 PIECE GASKET SCRAPER SET• Scrapers feature the Sure Grip handle design,

reducing hand fatigue and slippage, even when your hands are greasy.

• Includes: 9.5” Carbon, 8” Offset, 7.18”x5/8” Gasket, 7” Stubby Gasket Scrapers.

$77.01

MH60001

4 PIECE DOMINATOR CARBON SCRAPER SET• 10” long, capped end for striking.• Head sizes, 1/2”, 3/4”, 1”, 1 1/2”.

$52.31

LS80380

5 PIECE HOSE REMOVER SET• Contains long and short, standard and offset

hooks. • Long pullers are 13” long. Handles are dual

durometer material for comfort and grip.$41.58 VMSSC100

HEAVY DUTY STRIKING SCRAPER SETHeavy Duty Striking Scraper WithExtra Thick Heat Treated Stainless Steel Blade• Blade Extends Trough Handle • Can Be Struck On The Side Of Blade to Split

Seams. 1.25”, 1.50” and .75” Wide

$70.31

MH60026

EXTRA LARGE DOMINATOR SCRAPER SETFeatures Dominator handlesstriking end cap • 17” scraper with a 3” blade made from 5/8”

square steel and a 14-1/2” scraper with a 2” blade made from 1/2” steel.

$84.07

CV142

MASTER RADIO/ANTENNA SERVICE KITEleven-piece kit in

molded case. • Universal antenna

wrench, Ford radio removal tool.

• Deep sockets to remove and install the tamper-proof radio nuts from many GM, Chrysler, and other aftermarket radios.

• Antenna nut sockets that cover most import and domestic antenna nuts.

$62.72

69




PUNCH AND CHISEL SETS

Mayhew Chisels feature full shank heat treated parabolic heads to reduce mushrooming and chipping, (150 series) are black oxide finish for enhanced corrosion resistance, and all are made of high grade S-2 tool steel for superior tensile strength, toughness, and long life. All Sets are Poudly Made in the USA!

Item # Picture Pieces Sizes Type Sale

SK6012 A 123/32”, 1/8”, 5/32”, 3/16” Pin Punches; 1/8”, 3/16” Starter Punches; 1/8” Line Up Punch; 3/8” Center Punch; 1/4”, 3/8”, 1/2”, 5/8” Flat Chisels

Punch and Chisel $105.17

SK6016 B 163/32”, 1/8”, 5/32”, 3/16” Pin Punches; 1/8”, 3/16” Starter Punches; 1/8” Line Up Punch; 3/8” Center Punch; 1/4”, 3/8”, 1/2”, 5/8” Flat Chisels


SK6020 C 20

3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16” Pin Punches; 1/8”, 5/32”, 3/16”, 1/4”, 5/16” Starter Punches; 1/4”, 3/8”, 1/2” Center Punches; 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8” Flat Chisels


SK6029 D 29

6 Starter Punches: 3/32”- 5/16”; 7Pin Punches 3/32”- 3/8”; Center Punches: 1/4”, 5/16”, 3/8”; 7 Flat Chisels: 1/4”- 7/8”; Cape Chisels: 1/4”, 5/16”; Half Round Nose Chisel: 5/16”and Diamond Point Chisels: 5/16”, 3/8”


SK6035 E 5 1/4”, 5/16”, 3/8”, 1/2”, 5/8” Center Punch $45.31

SK6043 F 3 5/16”, 3/8”, 1/2” Long Taper Alighnment Punch $84.49

SK6044 G 4 1/8”, 5/32” regular and 3/16”, 1/4” Long Long Taper/Line up Punch $52.55SK6055 H 5 1/4”, 3/8”, 1/2”, 5/8”, 3/4” Flat Chisel $51.55SK6058 I 8 1/4”, 3/8”, 7/16”, 1/2”, 5/8”, 3/4”, 7/8”, 1” Flat Chisel $68.16SK6065 J 5 1/2”, 5/8”, 3/4”, 7/8” and 1” Long Flat Chisel $92.82

SK6069 K 9 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16” Roll Pin Punch $92.35

SK6072 L 12 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16, 1/2” Roll Pin Punch $152.57

SK6077A M 7 1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16” Pin Punch $60.43SK6085 N 5 1/8”, 5/32”, 3/16”, 1/4”, 5/16” Starter Punch $41.19

Item # Picture Pieces Sizes Type Sale

MH15070 A 14Center punches 3/32”, 3/16”; 1/8”, 3/16”; 4 Solid punches 3/32”-3/16”; Pin punch 1/4”; 5 Cold chisels 1/4”- 3/4”


MH15006 B 5 3/32”, 1/8”, 5/32”, 3/16”, and 1/4” Pin Punch $74.77MH15001 C 5 1/4”, 3/8”, 1/2”, 5/8” and 3/4” Cold Chisel $93.47

MH61044 D 145 Cold chisels 1/4” - 3/4”; Center punch, 3/8”; Starter punches 1/8”, 3/16”. Pin punches 3/32” -1/4”. Line-up punch 1/8”


Punch and Chisel Sets

A B

C D E F

G H I J

K L M N

A B C D

Precision Hardened Alloy Steel, Tempered Cutting Edges and softer rear stricking surface for safety. Ground surface for high visibilty and identification.Black oxide and coated for corrosion resistance.


KD82306 27 Piece Punch And Chisel Set $192.10

KD82307 4 Piece Long Taper Punch Set $39.16

KD82309 5 Piece Pin Punch Set $31.43

FOW72-500-290

HEAVY DUTY AUTOMATIC CENTER PUNCH

Punch And Chisel Sets

• Point easily removed for sharpening.• Features adjustable compression for marking a

variety of materials.$23.67

Made in the USA SK Punch and Chisel Sets

SK Punches and Chisels are hot forged from alloy steel for maximum strength. Each is hardened and tempered for maximum durability, and each is individually black oxided, ground and polished to a smooth metallic shine.

CE3S301A

MASTER TRANSFER PUNCH SET31 Pieces from 3/32” to 1/2” in 1/64” increments

plus 17/32”, 3/4”, 7/8” and 1” punches • Made from heat treated and tempered tool

steel • Diameters are .0025” undersized to facilitate use • Punches are 4 7/8” long • Comes in an easy to store and use roll

$33.10

70




PRY BARS AND LOCK OUT TOOLS

Item # Tip OAL Stock Sale

MH40168 Cur. 31” 3/4” $89.83MH40128 Str. 36” 5/8” $76.75MH40129 Str. 42” 5/8” $84.46MH40138 Cur. 36” 5/8” $74.51MH40139 Cur. 42” 5/8” $89.66MH40160 Cur. 48” 3/4” $123.53MH40162 Str. 58” 3/4” $130.84MH40164 Cur. 44” 7/8” $107.24MH40166 Cur. 45” 1” $132.64

Item # Size Style Sale

KD82208 8” Index $35.61KD82210 10” Index $39.87KD82212 12” Index $45.63KD82216 16” Index $56.51KD82220 20” Index $99.82KD82224 24” Index $81.25KD82233 33” Index $99.82KD82248 33-48” Index/Extendable $170.36KD82300 8” & 16” Index $74.13KD82301 8”,10”&16” Index $123.73

KD3959 22-32” Point/Chisel Extendable $47.95

Item # Size Sale

OT7172 10” $31.10OT7173 12” $36.29OT7174 15” $41.49OT7175 10.12,15” Set $95.49

Item # Pic Desc. Brand Sale Price

Assorted Lockout Tools and Kits

LT140 A 2 Piece Easy Access Wedge Kit LTI $74.15

LT145 B4 Piece Easy Access Folding Door Opening Kit Allows you to open the vehicle with the door handle,lock button, or electric lock switch.

LTI $94.90

LT340A C Master Auto Lock Pick Set Includes rocker picks, tension wrench, and gas cap pick. LTI $111.98

LT1000 D Contains 19 Pieces. Illustrated Manual and Pen Light Steck $186.69

SM32905 E Big Easy Extension Wand used with the BigEasy where extra length is needed Steck $13.92

SM32908 F Little Easy 29” Lock Out Tool Steck $17.33

SM32922 G Easy Air Wedge aids in spreading door from vehicle to insert the Big Easy Steck $33.89

SM32935 H Big Easy Storage Pouch Steck $31.24

SM32950 I Big Easy 56” Lock Out Kit with Sure Grip Lock knob lifter. Steck $50.79

SM32955 J Big Easy Glo Door Unlocking Kit with Easy Air Wedge Steck $77.10

• 10”capped-end handle design allows user to strike end of tool.

• Blade extends full length of tool to end cap. When you are on the handle, you are on the bar! •Built for 2 hands!

MH61355

3 PIECE DOMINATOR PRY BAR SET• Steel tipped bar through handle, 7”, 12” and 18”

$68.62

MH61356

3 PIECE DOMINATOR PRY BAR SET• 18” Straight , 24 “ and 36” Curved Tips

$134.71

Popular Vehicle Unlocking Tools and AccessoriesThese Kits Allow You to Open the Vehicle Without Damage to the Door Handle, Lock Button, Or Electric Lock Switch

SU9804

4 PIECE ROLLING HEAD PRY BAR SET

$50.53

Dominator Pry Bars Feature:

A

C

G HI

J

D E

F

B

MH60150

LADY FOOT PRY BAR SET• Rolling Head Bars 3 sizes 12”, 16” & 21”• Curved end ensures better leverage in small

areas; other end for aligning work. • Made in U.S.A.

$88.00

MH61366

5 PIECE DOMINATOR PRY BAR SETPatented Dominator two-composite handle

for comfortable and secure grip• Comes in convenient tray for storage• Sizes 40137 (10” OAL), 40140 (12” OAL),

40144 (17” OAL), 40146 (25” OAL) and 40148 (31” OAL)

$106.69

• Hook and point design.• Made of chrome vanadium steel with

machined and hardened tips.• Includes sizes: 6”, 12”, 16”, and 20”

Puts the pry bar where you need it for best leverage and exceeds ANSI requirements for proven strength.Indexible bars move over 180 degrees for greater leverage and have 14 locking positions

Indexible and Multi Use Pry Bars

Meets or exceeds ANSI specifications for prybars • 14 locking positions for over 180° of sweep. • Ergonomic handle for great fit and knurled texture for improved grip.

Indexing Pry Bars and Set

OT7687A

MINI PRY BAR WRENCHTurns any 3/8” drive ratchet

or breaker bar into a rolling head pry bar. • Gives you the versatlility of a pry bar without the storage problems.

$31.10

71




HAMMERS AND STRIKING TOOLS

Item # Type Wt Handle Sale

AN68-516 Ball Pein 16oz 12” $64.00AN68-524 Ball Pein 24oz 12.75” $80.84AN68-532 Ball Pein 32oz 14.37” $96.04AN68-540 Ball Pein 40oz 14.37” $110.11KD69-532 Sledge 21oz 12.75” $50.27KD69-533 Sledge 42oz 14.37” $61.52AN69-550 Sledge 5lb 20”: $128.26AN69-551 Sledge 8lb 30” $188.11AN69-552 Sledge 10.5lb 30” $239.22AN69-554 Sledge 11.5lb 36” $256.80KD69-542 Sledge/Slim 18oz 12.13” $44.62KD69-547 Sledge/Slim Dp 32oz 12.875” $56.16

Shot filled dead blow hammers with steel reinforced handles

Item # Pic Type Weight Sale

KD82250 A Ball Peen 8oz $25.36KD82251 A Ball Peen 16oz $26.70KD82252 A Ball Peen 24oz $33.38KD82253 A Ball Peen 32oz $40.07KD82254 B Claw 16oz $26.70KD82256 C Drilling 3LB $21.56KD82257 D Dead Blow 16oz $26.70KD82258 D Dead Blow 36oz $38.75KD82259 D Dead Blow 48oz $21.56KD82260 E Mallet/Wood Hdl 16 $26.70

Item # Item Type Weight Notes Sale

PMM7008B A Dead Blow 8 oz 10.7”” Anti Shock handle $9.16PMM7030B B Ball Peen 12 oz 15.9” Fiberglass Handle $10.11PMM7032B B Ball Peen 16oz 16.2” Fiberglass Handle $10.98PMM7034B B Ball Peen 24 oz 17.2” Fiberglass Handle $15.08PMM7036B B Ball Peen 32 oz 18.7” Fiberglass Handle $15.24

PMM7040B C Cross Peen and Sledge 3 lb 2 Pack 14.4” Fiberglass

Handles $28.38

PMM7100 D Sledge 3 lb 14.8” Fiberglass Handle $17.14PMM7101 D Sledge 4 lb 14.8” Fiberglass Handle $19.60PMM7102 D Sledge 6 lb 14.2” Fiberglass handle $39.08PMM7103 E Sledge 8 lb Long Fiberglass handle $42.49PMM7104 F Cross Peen 3 lb 14.9” Fiberglass handle $18.15PMM7109 H Axe 3.5 lb Long” Fiberglass handle $34.32PMM7112 I Axe 1.25 lb 15.2” Fiberglass handle $16.40PMM7114 E Sledge 10 lb 35.4” Fiberglass handle $46.04PMM7115 E Sledge 12 lb 35.4” Fiberglass handle $50.08PMM7116 E Sledge 16 lb 35.4” Fiberglass handle $60.99PMM7132 G Mallet 32 oz 15.2” Fiberglass handle $8.52PMM7216 A Dead Blow 16 oz 11.9” Anti Shock handle $11.74PMM7224 A Dead Blow 24 oz 17.3” Anti Shock handle $14.20PMM7232 A Dead Blow 32 oz 17.6” Anti Shock handle $17.23PMM7248 A Dead Blow 48 oz 18.1” Anti Shock handle $18.06PMM7264 A Dead Blow 64 oz 17.3” Anti Shock handle $22.11

Item # LBS Handle Sale

WL22036 20 36” $244.10WL40212 2.5 12 $56.04WL40412 4 12” $63.52WL40416 4 16” $74.73WL40624 6” 24 $100.88WL40636 6 36” $113.96WL40824 8 24” $117.69WL40836 8 36” $123.79WL41036 10 36” $142.97WL41236 12 36” $160.41WL41436 14 36” $174.36

Item # Type WT Sale

WL30216 Cross 2LB $57.91WL30316 Cross 3LB $70.99WL32414 Ball 24oz $50.44WL33214 Ball 32oz $64.73WL34014 Ball 48oz $65.38

B

D

E

C

A

TA81000

SLUGGER HEAVYDUTY SLIDE HAMMER• 10 Ib. hammer, balanced for

continued use• 10 body pulling attachments.• Quick assembly for applied hook-

ups• All parts stored on permanent

board.

$227.67

TA81100

SLUGGER 10 LBS SLIDE HAMMER KIT IN BOX• An assortment of the most widely used Slugger• Packed in a handy metal tool box which can be

locked for security.$227.67

TA81400

DENT PULLER AND SLIDE HAMMER• Supplied with nose cone, two metal pulling

screws and “L” puller• Fabricated of aircraft quality steel with rolled

threads.$38.00

PMM7134

5 PIECE BALL PEIN HAMMER SET• Drop forged high carbon steel heads.• Heavy duty fiberglass handle.• Rubber cushion grip.• Sizes: 8, 12, 16, 24 and 32oz.

$70.89

Unbreakable Sledge Hammers

Made of High Quality Components and Guaranteed to With-stand the Harsh Environments in the Shop or out on the Job

Hammers and Striking Tools The Worlds Most Durable HammersHi-Vis Green Head, Meets/Exceeds ANSI Specs

Dead Blow Hammers

Unbreakable Ball Pien and Cross Pien Hammers with 16” Handles

• Never Buy Another Sledge Hammer• Unbreakable Handle Technology- Steel Core Design prevents Breaking• Safety Plate Locks Head to Handle Eliminating Dislodging• No Slip Grip

KD82303

5 PIECE HAMMER SETContains the mostpopular stricking tools fora wide range of applications• Highest quality forged alloy Heads, comfort grips • Contains: 16oz. Ball Pein, 3lb Drilling, 12oz Soft

Face, 16oz Dead Blow hammers and , 16oz Rubber Mallet

$112.23

72




FRAME AND BODY REPAIR

10 TON COLLISIONPORTA POWER REPAIR KIT• Snap together

components for quick setups to apply pushing, spreading, or pulling force.

• Includes hydraulics along with extension tubes, adapters, and heavy-duty storage case. Ram has 6” stroke.

OT1515B $456.86

BH65114

BANNER 4-TON KIT• Includes: Pump, ram, 1/2–ton Wedgie® Ram,

Ram Toe, Plunger Toe, 6’ Hydraulic Hose with half connector, 5 Extension Tubes, Connector, Serrated Saddle, 90° V-Base, Flat base,

Flex–Head®

$266.88 BH65115

10 TON PORTA POWER PULLER KIT WITH ACCESSORIES• 10 Ton hydraulic, pump, & ram, 1/2 ton

Wedgie® ram, 6‘ hose, extension tubes: 27”, 18”, 10”, & 4”, Wedge head, serrated head, flat base, ram toe, plunger toe, 90° V–base , male connector, Flex–Head®

$427.65

IN814C

4 TON PORTA POWERBODY REPAIR KIT• 4 TON, 5 1/3” Extension• Spreader ram, hydraulic hand pump with

overload protection• 5”, 10”, 21” and 24” extension tubes• 3 1/4” extension tube (814C only)• Rubber head, Wedge head, Spreader ram plunger

toes, Serrated saddle, Rubber-faced flat base$316.84

IN5815C

10 TON BODY & FRAME REPAIR KIT PLASTIC CASE• Spreader ram, hydraulic hand pump with

overload protection• 5”, 10”, 21” and 24” extension tubes• Rubber head, Wedge head, Spreader ram

plunger toes, Serrated saddle, Rubber-faced flat base, 90° V-base, Quick connector, Model 81

$405.82

IN801

10 TON FOOT PUMP• Works with 4 ton and 10 ton rams

$376.37 OT2510A

AIR/HYDRAULIC TWO STAGE PUMP• Pump operates on

shop air (40-100 PSI/ 9 scfm con-sumption), driving a variety of sgl. acting rams, presses, and hydraulic pullers operating at up to 10,000 PSI. Internal relief valve protects the hydraulic components regardless of hydraulic pressure.

• Two-stage release mechanism gives fast or metered ram return while reducing hydraulic shock. Pump, hold or release load with foot lever control. Reservoir105 cu. in. (98 cu. in. usable).

$350.42

OT1513B

4 TON PORTA POWER SET• Single-speed hydraulic hand pump, hose,

and ram with 4” stroke• Includes: hydraulic pump, hose, and ram;

ram flat base; extension tubes (4); 1/2-ton spreader; tube coupling; ram toe; wedge head; serrated saddle; flex head; plunger toe; 90º wedge head

$290.71

OM22903

AIR HYDRAULIC PUMP• Easy to use foot pump that is air activated• Made of durable light weight corrosion-free aluminum• Develops pressure rating: 10,000 PSI• Size: 16-3/4 x 6 x 6-5/8• Uses any single-acting ramsup to 55 ton capacity

$328.17

BHB65426

HYDRAULIC FOOT STYLE AIR PUMP• Swivel coupling simplifies hydraulic connection

and pump operation• Three-positions provide cylinder advance, hold,

or retract operation• Operates in any position. Base mounting plate

included

$519.36

DNT-DF3D

DIGITAL TRAM GAGEDigi-Tram Measures 1 to 12’ (400-3640 mm) with the touch of a button. • Zeroing function enables you to take

comparison measurements, displaying the appropriate positive or negative reading.

• Placing the center pointer on the prescribed 400 mm mark, measurements shorter than the collapsed length of the digital tram gauge can be made.

$1,088.47

IN818SD

20 TON CHASSIS AND FRAME STRETCH KIT• Includes: 2 Speed Hydraulic Hand Pump, 5’

Hydraulic Hose, 20 Ton Ram w/5” stroke, 27.5”, 20”, 10”, and 5” Extension Tubes with additional application accessories.

• All components use a threaded connection for added strength and durability

$1,493.79

Item # Pic Ton Sale

SU4910A A 10 $412.96SU4940A B 4 $261.54

Hydraulic Body and Frame Kits

Complete starter sets primarily for collision repair work and can be used for spreading, bending, pushing and clamping operations.

73




Body Tech Tools

COLLISION REPAIR

Item # Length Sale

MTN1106 26.5” $53.60

MTN1107 31” $56.55

MTN1111 18” $19.57

TA89675


TA89002 Hickory Hammer Handle $15.07

TA88000 Railroad Dolly $58.70

TA88050 Toe Dolly $56.75

TA88100 Wedge Dolly $71.43

TA88150 Heel Dolly $52.84

TA88160 Rubber Door Skin Dolly $42.04

TA88175 Spoon Dolly $39.85

TA89000 Pick Finishing Hammer $51.49

TA89050 Finishing Hammer $54.18

TA89100 Blunt Point Hammer $56.64

TA89150 Heavy Duty Shrinking Hammer $60.66

TA89200 Chisel Hammer $58.40

TA89250 Heavy Duty Bumping Hammer $60.42

TA89300 7” Pick Hammer $69.43

TA89350 Door Skin Hammer $56.75

TA89600 Heavy Duty Inside Spoon $88.09

TA89625 General Purpose Spoon $88.09

TA89675 High Crown Spoon $97.89

TA89700 Pry And Bumping Spoon $137.05

TA89725 Slapping Spoon $48.92

TA88000

TA88100TA88150

TA88050

TA89000

TA88160

TA89725

TA89050

TA89100

TA89200

TA89300

TA89350

TA89600

TA89625

TA89700

MTN170FGDOOR SKIN HAMMER FIBERGLASS HANDLE

$58.09

MTN153FGB

CHISEL CuRvED BODy HAMMER FIBERGLASS HANDLE

$43.65

MTN647KFG

7 PIECE FIBERGLASS BODy AND FENDER SET• IncludesCross chisel curved hammer,

shrinking hammer, utility pick hammer, light dinging spoon, toe dolly, heel dolly, gerneral purpose dolly.

$288.08

MTN644KFG

• Martin Forged Steel specially processed for use in high impact applications

• Fiberglass handles help deaden impact to the arm for extended use

$152.41

4 PIECE FIBERGLASS BODy AND FENDER SET

TA89890

FLEXIBLE SANDING BOARD• For sanding rounded or flat surfaces• Uses standard cut abrasive paper 2 3/4 “ x 17

1/2 “ • For wet or dry sanding.$31.96

TA89400

DOOR SKIN HAMMER AND DOLLy SET• Excellent combination kit to fold new door skins

around frame• Consists of Cat. Nos. 88160, Door Skin Dolly and

89350, Door Skin Hammer

$96.90

MTN155GBODy FENDER BuMPER HAMMER

$47.47

MTN158FGGENERAL PuRPOSE PICK HAMMER FIBERGLASS HANDLE

$40.97

HAMMERS & DOLLIES

MTN694KFG

• 4 of the most popular body hammers. All are constructed with a rugged fiberglass shank, vibration-absorbing rubber grip and

famous Martin quality steel heads. 31217 Door Skin Hammer• 31226 General Purpose Pick Hammer. 31229

Utility Pick Hammer. 31218 Curved Chisel Hammer. Also included is a dense cell foam protective holder. MADE IN USA.

$176.31

CuRvED BODy PICKSused for MinorDent & Dings

KD82302

7 PIECE BODy HAMMER SET• Wooden epoxy bonded

handles provide acurate touch and feel of the work.

• Stored in durable blow mold case• Contains: (3719)Smooth faced Bumbing

hammer with square and round face, (3718) Smooth face cross chisel hammer, (3720) Cross faced Shrinking hammer, (3725) Wedge Dolly, (3724) Gen Purp. Dolly, (3722) Toe Dolly, (3723) Heel Dolly.

$149.64

PMM7007

• Set includes heavy shrinking hammer, pick and finish hammer, straight pein finishing hammer, heal dolly, utility dolly, double end dolly, and curved dolly.

$45.60

7 PIECE AuTOBODy REPAIR KIT

4 PIECE HAMMER SET FIBERGLASS HANDLES

74




BODY SHOP FABRICATING TOOLSBODY SHOP REPAIR

TA87360

LEvER ACTIvATED SINGLE SuCTION CuP• For windshield removal and replacement.• Suction Cup measures 4 5/8” diameter.• Capacity 80 lbs.

$10.48

TA87370

LEvER ACTIvATED DOuBLE SuCTION CuP• For windshield removal and replacement.• Suction Cups measure 4 5/8” diameter and

pivot for better gripping.• Capacity 154 lbs.

$27.80

TA14540

HEARING PROTECTOR• Protects hearing

against loud shop sounds

$20.00

TA19330

AIR POWERED CAuLKING GuN• Accommodates all standard caulking

cartridges.• 4CFM, Recommended operating pressure is

50-70 PSI.

$36.13

TA19300

HEAvy DuTy CAuLKING GuN• Use with caulks, glues, or other

cartridge adhesives$9.50


TA17300 1/2” Paint Brush $0.93

TA17310 1” Paint Brush $1.06

TA17320 1-1/2” Paint Brush $1.27


TA17340 2-1/2” Paint Brush $1.81



TA26200

750 PIECE CABLE TIE ASSORTMENT• 400 - 4” 18 lbs. tensile strength

(100 each white, black, yellow and red ties)

• 300 - 8” 75 lbs. tensile strength (white ties)

• 50 - 11” 75 lbs. tensile strength (white ties)

$18.51

WOODEN HANDLE PAINT BRuSHES

DNT-609

PLASTIC uTILITy WEDGE KIT• Multi use wedges for prying and spreading• Made in germany and is constructed from high

quality nylon. • Includes a 30, and 60mm wedge and a

dismounting tool. • Will not damage soft plastics, scratch paint or

glass.$38.48

DNT-AB711

7 PIECE RuBBER BODy REPAIR DOLLy SET• Allows techs to slowly and softly modify delicate

panels to a desired contoured form• Perfect to help avoid over-stretching panels. • Fantastic for aluminum panels that are already

prone to stretching due to the soft nature of the metal.

• The dollies are stored in a handy molded case.

$204.10

DNT-PK100

PRO GLuE PuLLING KIT• Everything you need to pull rounded dings and dents from car panels. • Glue does not damage OEM paint. • When used in conjunction with the PDR rods you will be able to repair all hail and parking lot dings. • Includes 5 small, 5 large T-pullers, an

assortment of different size and shaped pulling nibs, cone, bar and tri-pod pullers, 10 sticks high strength glue, heavy duty glue gun and storage case.

$306.67

DNT-SK100

SLIDE HAMMER DENT REPAIR KIT• Perfect for pulling dings and dents from steel and aluminum

panels. • Double walled panels

do not present a problem• The ultimate tool for PDR

Paintless Dent Repair.

$344.62

AO4524

PLASTIC PRyBAR, FASTENER AND MOLDING REMOvER SET• Set includes 10 popular styles for most

applications• For use on internal and external vehicle molding

and trim fasteners• Plastic construction of tools prevents scratching

and damage to vehicle$28.07

DNTDF-550DX

DELuXE DING MASSAGER KITRemove dings and small dents from OEM paint

when access to the back panel is not possible Kit includes: Slide hammer, Squeeze puller, Glue

gun, Scrapper stick, 10 Glue Sticks, 9 different pulling nibs in a blow molded case.

$409.23 DNTDF-BL10

BODy LINE MARKER TOOLRe-create fender curve lines perfectly every time • Makes accurate measurements around wheel

opening moldings quickly and easily. • Tool draws a line equal distance from any part

of the fenders edge.

$27.47

HA3073004

17 PIECE MARATHON HOLESAW KIT• Variable depth gullets-provide more efficient

chip removal. Sizes 5/8”-3” • Bi-metal construction-for toughness & long life • 4/6 Variable pitch teeth-for reduced noise and improved performance.

$113.97 TA15210

1/8” DOuBLE ENDSTuBBy DRILL BIT• 1/8” Double EndedStubby Drill Bit 10 Pack

$2.71

75




BODY SHOP FABRICATING TOOLS

Spot Weld Cutters

TA15060

TITANIuM MuLTI-STEP DRILL• Has 13 hole sizes in 1/32” increments from 1/8”

thru 1/2”.$25.16 TA18000

3/8” ROTARySPOT WELD CuTTER• Double ended 3/8’ blade, retractable pilot• Blades interchange with other arbors

$12.74

Item # Sizes Sale

LE1815139 7/8”, 1-1/8”, 1-3/8”, 1-3/4”, 2”, & 2-1/2” $135.60

LE1815140 7/8”, 1-1/8”, 1-3/8”, 1-1/2”, & 2” $126.98

LE1815195 1-1/4”, 1-3/8”, 1-1/2”, 2”, & 2-1/2” $148.49

BT11080

ROTOBROACH SMALL PDR HOLE CuTTER KITRotobroach Kit Specially made for use with

Paintless Dent Removal tools.• Use to cut in areas where space is restricted.

$55.30

BT11090

ROTOBROACH LARGER PDR HOLE CuTTER KIT• Packaged in a plastic carrying case. 5/16, 3/8,

7/16, , 9/16, 5/8, and cutters, Extra pilot, Center punch hex wrench and washers, arbor (11122)

$77.85

BT11091

ROTABROACH LARGE DIAMETER CuTTER KITDesigned to provide you with the right sizes of

hole cutters needed to accomplish many jobs.• 7/8, 1, 1-1/8, 1-1/4, 1-3/8, & 1-1/2” Cutters, Arbor,Center Punch & Extra Pilot, arbor (11007)

$188.45

BT11092

ROTOBROACH METRIC HOLE CuTTER HOLE SAW KIT• Rotobroach Metric Hole Cutter Kit for use where

the OEM states metric sizes are preffered for the job

• 8,10, 12, 14, 16, 18, 20mm Cutters -Arbor (11122), (2) Extra Pilots, & Center Punch

$77.85

BT11095

RuST-PROOFERS CuTTER KITRust-Proof Cutter Kits are specifically made for rust

proofing application work• Features a Skip Proof Pilot (3) 1/2” Cutters, Arbor

(11123),, & Extra Pilot$56.59

BT11096

SPOT WELD SPECIFIC KIT• Duplicates of the 3/8” size in a handy kit for jobs

on the go• (3) 3/8” Cutters, Arbor, (11123) w/ Skip-Proof

Pilot, & Extra Pilot$50.95

BT13218

STANDARD HOLE SAW SPOT WELD CuTTER KIT• Low cost solution to hole cutting in sheet

metal. • Spring loaded pilot “pops” the slug from the

cutter $56.57

BT14003

CARBIDE TIP ANTENNA HOLE CuT KIT• Carbide Antenna & Access Holcutter Kit• All cutters include arbor, pilot, and ejector

spring. • Arbor fits 3/8” & 1/2” drill chucks.

$60.02

BT14006

CARBIDE COATED HOLE SAW KITAutomotive fabricators kit of carbide holcutters • Includes 7/8, 1-1/8, 1-3/8, 1-3/4, 2, & 2-1/2”

Cutters, Arbor & Extra Pilot

$156.53

Specialty Spot Weld and Annular Cutting Kits

VG10228

4 PIECE uNIBIT SETThe Unibit 3 + 1 step drill set • Bits features as single radial concave flute design for smooth, even cutting

and virtually round holes. Ideal for drilling holes in steel, copper, brass, aluminum & other thin materials.

$70.33 VG10225

4 PIECE BIG uNIBIT STEP DRILL SETS HSS #1, 2, 4, AND 21 SIZES,• Non-skid self-starting tip eliminates skidding and need for center punching.• Includes #1, 2, 4, and 21 sizes, Drills up to 1-3/8• Single-flute cutting edge for greater control

through steps$208.59

• Up to 2X Life in Metal Cutting• Bi-metal with an enhanced tooth geometry, a thin kerf design, and an advanced coating contribute to the efficiency of the cutting process by removing material faster, therefore generating less heat while cutting.

Speed Slot Hole Saw Kit

Just PuLL, TWIST, and SNAP!

Item # Size Fits Q/Pack Sale

BT11097 Pilot 11123 3 $18.96

BT11104-3 5/16” 11122 3 $28.22

BT11108-3 3/8” 11122 3 $29.58

BT11112-3 7/16” 11122 3 $35.32

BT11116-3 1/2” 11122 3 $40.73

BT11120-3 9/16” 11122 3 $45.47

BT11121 Pilots 11122 3 $7.53

BT11122 Arbor 1/4”-3/4” 1 $21.14

BT11123 Arbor 3/8”-3/4” 1 $26.66

BT11124-3 5/8” 11122 3 $47.08

BT11132-3 3/4” 11122 3 $55.03

BT11148 1” 11122/3 1 $34.44

BT13202 5/16” 13216 3 $18.51

BT13204 3/8” 13216 3 $19.88

BT13206 7/16” 13216 3 $25.38

BT13212 5/8” 13216 3 $34.44

BT13214 3/8” DS 13216 3 $16.05

BT13216 Arbor 13 Series 1 $15.17

BT13217 Pilots 13216 $6.84

BT132243/8” Complete assembly

1 $16.05

Item # Sizes Sale

BT11099 1/4 -3/4” $267.08

BT11201 6-20mm $267.08

Rotobroach 16 Piece Master KitsCut More Holes, in More Sizes with tools that last 10x Longer & cut 3x Faster than twist drills or hole saws.t

76




WELDING AND ACCESSORIESWELDING AND SPOT WELDING TOOLS

AO1756

AIR SPOT WELD DRILL KIT WITH 5.5” DEEP CLAMP

$330.73

• Air Spot Drill with 5.5” Deep Clamp Kit and 4 Drill Bits 2 Speed

• Adjustable depth stop which allows you to drill out just the spot weld and not the panel beneath

DNT-DF15DX

ANNIHILATOR SPOT WELD DRILL KIT• Applies the cutting pressure pneumatically. No pushing on the drill bit.• “Smart” pressure valve helps prevent breakage of bits

and applies correct consistent pressure from the first to the last spot weld. 1000-rpm motor

$542.58

Item # Size lbs. Type Sale

FR1440-0210 .023. 2 Steel $11.15FR1440-0211 .023. 10 Steel $37.87FR1440-0215 .030. 2 Steel $8.88FR1440-0216 .030. 10 Steel $31.16FR1440-0217 .030. 33 Steel $79.85FR1440-0220 .035. 2 Steel $8.14FR1440-0221 .035. 10 Steel $29.08FR1440-0240 .030. 1 Aluminum $13.89FR1440-0241 .035. 1 Aluminum $13.56FR1440-0230 .030. 2 Flux Core Steel $29.45FR1440-0235 .035. 2 Flux Core Steel $22.35

Item # Type Size Sale

FR1444-0025 Tip 0.023 $13.21FR1444-0026 Tip 0.030 $13.21FR1444-0027 Tip 0.035 $13.21FR1444-0140 Nozzle 0.500 $10.63FR1444-0051 Nozzle $22.18

Item # Type Size Sale

FR1440-0296 Spray 16 oz $11.03

Item # Description Features Pict. Amp/Max Volt Duty Range Misc. Sale

FR1444-0322 FP95 Amp Wire Feed Welder Wire size .030 - .035, 2 voltage settings A 80/95 120 15% 3/16” Flux Only $443.94

FR1444-0324 FP125 Mig and Wire Feed Welder

Wire size .023-.035, 2 and 10lbs spool capacity. Needs regulator. B 88/110 120 20% 1/4” Flux or Solid wire $573.46

FR1444-0326 FP 135 Amp Wire Feed Welder Wire size .023 - .035, 4 heat settings, needs flow gage for steel welding. C 90/135 120 40% 1/4” Flux or Solid wire $877.85

FR1444-0346 FP 135 Amp Wire Feed Welder Kit

Wire size .023 - .035, 4 heat settings, needs flow gage for steel welding. In-cludes cart, flow gage, helmet, hammer, and all start up accessorites

D 90/135 120 40% 1/4” Flux or Solid wire $871.79

FR1444-0348 FP165 Amp Mig Welder Kit 4 Power settings, includes cart, wire, ham-mer, brush, flow gage, helmet and more. E 130/165 230 20% 3/8” Flux or Solid wire $981.72

FRW1002502 FP140 Aluminum Mig Welder with Spool Gun

Wire size .023-.045, includes everything needed to start except gas. F 90/140 120 20% 3/16” Flux, Alum, or

Solid wire $1,448.88

THD1-1110-1 Aircut 15C Plasma Cutter Comes standard with a built-in air com-pressor for complete portability G 15 120 35% 1/8” Can cut short

bursts to 3/16” $1,488.88

THD1-4200 Cutmaster Plasma Cutter Two power plugs for either 120 or 230 volt use H 27/40 120/230 27-40% 1/4”-

1/2”Cuts 6 to 15” based on amprage $1,538.46

THMW1001500 Fab 190 Mig Welder

Wire size .023 - .035 8 settings spot timer and large spool capacity to 33/44 lbs, with a wheel kit, cylinder rack and regulator

I 145/190 230 15-30% 5/16” Flux or Solid wire $1,230.77

Fire Power, Thermal Arc, and Thermal Dynamics, are all

Brands of Thermadyne, the Premiere Name in

American Welders and Plasma cutting systems.

All wire feed welders include: wire, tips,

nozzles, mig gun handle, and grounding clamp. This brand features the

best quality money can buy backed by premiere

customer service and warranty.

Mig Welders and Plasma Cutters

F H

EI

DA

C

B

Mig Welding Wire

Anti-Spatter Material Prevents spatter adhesion on surface, reduces clean-up time and is non-flamable. Safely use it on the weld surface, of the mig torch area to reduce build up of spattered weld.

FR1423-1408

NOZZLE AND TIP CLEANER KIT• Cleans and Trues most Standard Orifices • Contains most commonly used 12 drills (#57-74)

in assorted sizes• Complete with Built-in Chuck and Pocket Clip,

Drill sizes: #52-74

$21.28

Popular universal Mig Welding Gun Tips And Nozzles

FR1444-0140 FR1444-0051

FR1444-0025FR1444-0026FR1444-0027

AO1757

DEEP CLAMP SPOT WELD DRILLL KIT• 2 Speed action with adjustable depth stop • Drills out the entire spot weld, eliminating the

need for grinding• New low RPM tool prolongs the life of spot weld

bits. Kit Includes 5.5” Deep Clamp, 4 - Drill Bits (2pcs. 6.5mm, 1pc. 8mm, and 1pc. 10mm, End Line Oiler, and 3 Way Swivel

$353.62

HS7600

STuD BuDDy PIN PuLLERReduces panel repair time, thereby increasing

your profitability• Allows for sensitive control of pull, reduces over

pulling$69.16

77




Body Shop Stud Welders

WELDING AND ACCESSORIESWELDING AND SPOT WELDING TOOLS

Magna-Spot Welders • New low-heat transformer for today’s high-strength steel uni-body vehicles.

MEMGJO1050

LOW HEAT STuD WELDER KITThis stud welder kitfeatures low-heattechnology for today’s highstrength steels, eliminating “burn-through” • Comes complete with a slide hammer and 500

draw pins, all you need for no-holes dent repair.• Features the Magna Pin System, which provides

a holder for pins both on the case and in the electrode tip

$280.67

MEMGJ01000

ENTRy LEvEL STuD WELDER KIT• The J01000 is an economical kit for the first time

user. Stud gun has the same welding power as the professional 1500 series.

• 1 Magna-Spot 1000 Gun• 1 Slide Hammer, 1 Storage Container• 1 Electrode, 100 2.0 mm Draw Pins

$235.31

MEMGJO1500 $375.96

HS4550

STuD WELDER STARTER KIT• Stud Ease holds the welding stud in the welder

regardless of the direction the welder is pointed. No longer does the stud fall out of the welder when the welder is pointed in a downward direction.

• Includes: 4590 Starter Welder, 1001 Flexpert Welding Studs, 1004 Stud Welding tip, and

1016 Deluxe Slide Hammer:

Features Extreme Flexibility For Custom Multi Angle Pulling, - 500 Per Pack

$255.40

MEMGJO2250

2000 AMP STuD WELD KIT• Includes: Magna-Spot 2000 Gun, Heavy Duty Slide Hammer, 3 Electrodes, draw pins, Rivets, Magna T-Puller, Magna Wire

Electrode Kit , Magna Wire

$537.50

1500 AMP STuD WELDER KITIncludes all the basic requirements for today’s professional collision repair technician. 1 Magna-Spot 1500 Gun 1 Heavy Duty Slide Hammer 1 Molded Case 3 Electrodes 500 2.0 mm Draw Pins 150 Rivets

HS10022.6MM Welding Pin Studs

$18.96

HS10012.2MM Welding Pin Studs

$18.96

Flexible Welding Studs

SQ0260S Small $50.77

SQ0260M Medium $50.77

SQ0260L Large $50.77

SQ0260X X-Large $50.77

SQP760S Small $25.87

SQP760M Medium $25.87

SQP760L Large $25.87

SQP760X X-Large $25.87

SQ11600 Small $44.52

SQ11601 Medium $44.52

SQ11602 Large $44.52

SQ11603 X-Large $44.52

SQ11604 2X- Large $48.97

SQ11605 3X-Large $53.44

SQ11606 4X-Large $62.32

Ergonomic glove, designed especially for TIG Welding, with flame retardant Nomex back to withstand the heat.

• Fabric is processed and treated to be per manently flame resistant (burn through may occur if spatter rests on jacket)

Sporty Style WeldLite Sateen Pro Welding Jackets

Pro Series Large Mig Welding Gloves with CuffIndustry’s Most popularMIG/Stick Premium Grain Pigskin Welding Glove

Pro Series IronFlex Tig Welding Gloves Nomex Back

DNT-595II

DENT SHARK 2 SPOT WELD DENT REMOvERGet a Stud welder and pulling system that is an

extension of your body. It’s like having sticky fingers and being able to pull dents with your hand.

• More Versitle and than Faster Than Stud Guns!• Will weld: weld pins, weld a slide hammer

directly to the panel, weld a light pulling rod, weld wiggle wire for crease pulling, shrink

• Heavy duty 110 volt unit made for extended use

• Includes Pin/ washer tip, Wiggle wire tip, 1 pound wiggle wire, shrink tip, 3 finger claw, slide hammer rod & weight, short pull rod, leverage puller and ground magnet

$865.39

FREE!AIR FILTER SySTEM

TZ45241

250 PIECE WELDING STuD ASSORTMENT• Top quality components packed in an easy pick package

$12.73

MEMGMS1KIT

MAGNA STITCHER PLASTIC REPAIR SySTEM• Fits all popular stud

welders, and includes 100 staples

$139.94

DNT-DF505

DENT PuLLING STATION• Applications include:

Weld pins, Weld a slide hammer directly to the panel, Weld a light pulling rod, Weld wiggle wire for even crease pulling, Weld a rod for leverage pulling, and shrink metal

• 220 volt single phase dent pulling station • Complete kit includes all accessories to make it

happen$1,435.90

HS9000

DELuXE uNI-SPOT KITThe Uni-Spotter 9000 Deluxe Stud Welder Kit is a

superior stud welding kit for the professional body man who wants the best.

• Includes all the needed accessories to start including the Deluxe Slide Hammer

• Features the Eliminator Side by Side Adapter with Stud Ease Technology

$630.39

Complete Sheet Metal and Body Repair

Plenty Of Power, virtually Eliminates Burn-Through

78




GAS WELDING AND ACCESSORIES

VP41260

AuTO DARKENING SOLAR WELDING HELMET• Protects against UV and infrared radiation in variable shades from DIN 9 to DIN 13 • Lens automatically darkens when an arc is

struck & returns to normal when welding stops • Powered by solar cells with battery back-up

$96.71

Variable shade from 9 to 13. Filter lens Dimensions 4.33 in x 5.54 in x .394” Viewing Area Dimensions 3.86 in x 1.8” with welding and grinding modes

FR4100-1002 USA Flag $121.01

FR4100-1003 Tribal $109.89

FR4100-1004 Skull & Flames $121.01

Wide View Auto-Darkening Welding Helmets

TZ41262 Wide-View Solar Powered Welding Helmet Black $113.91

TZ41265 Eagle Solar Powered Welding Helmet $132.53

TZ41266 Flame DesignSolar Powered Welding Helmet $132.53

VP41267 Solar Powered Auto Dark Welding Helmet (Swoosh) $124.25

Auto Darkening Welding Helmets

PORTABLE TOTE CuTSKILL GAS WELDING KIT• Provides for Gas Welding on the go in the field• Welds up to 3/32 and cuts up to 1-1/4”• Built in flash back arrestors & check valves• Includes 12’ hose, cutting/welding tips two

cylinders, two regulators and storage tote

VIC0384-0939 $441.54

DNT-601

WELDER NO SHOCK SuRGE PROTECTOR• Soaks up electrical surges

when actively repairing the vehicle with electronic charged equipment

• Protects sensitive electronic components

when mig and spot welding on a vehicle.

• An Absolute must when jump starting. • LED indicates that the device is working and correctly connected.

$55.49

VIC0384-2531

250 SERIES MEDIuM DuTy GAS WELDING KIT• Single stage design• Durable forged

brass body. Robust stem type seat mechanism

• Powder coated bonnet with increased strength. Easy to read 2”, dual scale gauges

$358.56

Ultra high protects against UV & IR Variable from DIN 9 to DIN 13 window 4.5 x 3.5” Outside sensitivity adjustments provides clear vision both prior and during welding. Replacement Lenses: 4.5x3.5” Part #: 41264

FR0781-9171 125 max psi Oxygen Regulator

$123.61

FR0781-9172 15 psi max Acetalyne Regulator

$130.22

FR1421-0039

TWIN TANK GAS WELDING HAND TRuCK CART• Easily transport gas welding

cylinders and torch assemblies

• Fits full size gas and oxygen tanks

$171.57

350 Series Gas Welding Regulator AssembliesThese compact single stage regulators are perfect for welding and cutting applications for farm, construction, shop, or “DIY” needs.

THMW1003188

Infinite Voltage Control with optimized starting performance. Mig, Tig and Arc• Inductance Control for arc stability and spatter

control.• Durable Metal Feed Plate features 2 roll drive system, quick change reversible drive rolls and

easy-to-set single scaled wire tension knob.• 4” or 8” Spool Capacity allows easy installation of wire spool sizes.

$1,362.05VIC0384-2530

MEDIuM DuTy OXy/ACETyLENE TORCH KITCuts up to 1/2” (up to 5” with optimal tips)• Welds up to 5/64”/1.9 mm (1-1/4”/31mm w/

optimal nozzles)• Welding and Cutting Torches, Flash Back

Arrestors, Regulators, Dual Gas Line, Spark Lighter, and #5 Welding Goggles

$280.00

FABRICATOR 181I MuLTI WELDER AuTO PAC


Standard View Auto Darkening Helmets

VP41278 Pirate 2.125 x 4” viewing area $114.90

VP41279 Skull 2.125 x 4” viewing area $125.23

VIC0384-2652

350 SERIES TORCH KITHeavy Duty Torch Handle with

flashback arrestors and check valves, uses new 350 series regulator

• Welds up to 1/8’’ (3’’ with optional nozzles)

• Cuts up to 3/4’’ (5’’ with optional tips)

• Cutting Attachment, Size 2 Welding Nozzle, Size 1 Cutting Tip, 25’ R-Grade Hose, Striker and Goggles.

$338.46

VIC0384-2690

HEAvy DuTy TORCH SET WITH REGuLATORSDo You Gas Weld A Lot? This is the Set You Need• Ergonomic, textured, precision contoured

handle is designed to reduce operator fatigue and provide better grip.

• One Cutting Attachment for All Fuel Gases (with proper tip)

• G350 Series Regulators with easy to read high contrast gauges for clarity.

$418.01

79




SHEET METAL FABRICATION AND WELDING ACCESSORIESGAS WELDING AND ACCESSORIES

TA89500

SPOT WELD BuSTER SET• Hardened steel. Cushioned grip for comfort.

$43.10

SQA7246

4” X 6” WELDINGSPATTER SHIELD WELDING BLANKET• Shields surfaces from weld splatter.

$44.31

SQA1660

CARBON FIBERWELDING SHIELD BLANKET• Light weight soft & flexible Size

60 x 80”• Stands up to heat, molten metal

$153.85

MH60005

2 PIECE DOMINATOR WELD WAKKER CHISEL SET• Easily separates spot weld or bonded panels

on quarter panels, rockers and any other pinch weld.

• Sharpened end allows for penetration between the panels, while the sharpened edge allows for side impact to drive the panels apart without damage.

$47.87

FR1420-0296

WELDING HOSE REPAIR KIT• Most popular sizes ferrles and fittings to repair

damaged welding hoses$98.02

MTL8363

50” WELDING HOSE RETRACTING REEL• Layers the hose back and forth across the reel

as it returns. • Adjustable Hose Stopper increases or decreases

the length of the hose that remains when hose is fully retracted

• Seven Position Locking Bracket• Reels can swivel freely on a mounting bracket

up to 138° or can be locked into place using the locking brace.

• Use freestanding or mounted on wall or ceiling • Made from durable UV stabilized polypropylene

$327.84

Item # Piece Type Sizes Sale

TA14270 3 Drift 1/2”x7”, 5/8”x7”, 3/4”x8” $49.12

TA14290 4 Pin1/8”x4”, 3/16”x4”, 1/4”x4” ,3/8”x6”

$33.91

Item # Type Sizes Sale

TA17100 Circular Flare .020 x 1.5” $12.74

TA17110 Solid End Brush .020 x 1.5” $10.57

TA17120 Knot Hollow End .020 x 1.5” $15.86

TA17130 Wire Cup Brush .014 x 2.5” $9.50

TA17150 3 Row Steel Scratch Brush Wood Handle .010 x 13.75” $4.19

TA17220 Skinner Brush and Arbor Coated x 2” $25.54

Item # Item Punch Size Sale

AO605PT A 5.5mm $85.17AO605ST B 5.5mm $85.17AO608PT A 8mm $112.59AO608ST B 8mm $112.59

Item # Sizes Sale

FR1423-1425 Medium $22.32

FR1423-1426 Large $24.55

Brass Punch SetsPremium Quality Hand and Machine Brushes. Machine Brushes are Typically Used in Air, Cordless or Electric Tools for Removing Rust, Paint and Slag

MAGNETIC CLAMPING ANGLES

Wire Brushes

Magnetic Angles will hold both sheet metal and tube steel at 45, 90 and 135 degrees to make preceision welding easy.

Punch and Flange Tools

Performs hole punching and panel crimping featuring a rotating head for convenient use.

• Every pull of the lever delivers a single punch or a single flange crimp with precision control

• Forms an offset crimped edge on sheet metals for no-bump lap welds

A

B

DNT-DF800BR

HOT STAPLER PLASTIC REPAIR KITCreates a strong, structural repair while still

maintaining flexibility to allow for proper fitting of components and bumpers.

• Uses heat to embed a staple into the plastic to “stitch” tears in plastic back together.

• Repair broken fittings on headlight assemblies, torn tabs, or any other plastic components

$542.56

EZPRK6

PLASTIC REPAIR STAPLER SySTEM

$252.00

Expensive plastic parts can be saved instead of being replaced at a costly price. • Great for repairing

broken locator pins, door panel clips, and tabs.

• 3 Heat settings for different plastics. • 3 different staple types included.

NP090100

PLASTIC STAPLER KITGreat for repairing headlight holding fixtures, and

other high cost plastic parts that normally were replaced, Now they can be fixed!

• 110 Volt AC Power, No Transformer Needed!$212.37

80




Sheet Metal Fabrication

VG544T

5 PIECE vISE GRIP WELDING SET WITH FREE T-SHIRT• Includes 2 - 11R, 11” C-Clamps, 2 - 6R, 6” C-Clamps, 1 - 10R, 10” Straight Jaw

$99.95

RIVET GUNS & BODY SHOP SPECIALTY PRODUCTS

TA19400

PLASTIC RIvET GuN• Sets most plastic rivets in

one stroke without re-gripping.• Sets all sizes using a

single nosepiece.

$25.93

Sets five sizes of aluminum and steel rivets:1/8”, 5/32”, 3/16”, 7/32” and 1/4”1/4” nose reachAll metal construction, simple design and few moving parts.Features plastic bottle rivet catcher

HK175A

AIR PNEu-DRAuLIC RIvET GuN• Pneudraulic design develops 3,500 lbs. pulling force.• Powerfully sets rivets from 1/8” to 1/4”

using easy-to-change nose pieces.

$512.68

HK150A

• Up to 3,500 Lbs pulling force

using One-handed operation • Installs aluminum, steel, & stainless steel rivets through 1/4” diameter • Sets threaded aluminum inserts from 3mm through 3/8 - 24 size, & steel inserts through 1/4 - 20 size with optional nuts

$301.78

HAND HyDRAuLIC RIvET GuN

PROMO! FREE T-SHIRT

DNT-DF8

1/4” HOLE PuNCH PLIER• Little pressure is needed to punch

out holes.• 1-1/2” deep throat allows you to get

the best overlap capability for your plug welds.

$93.41

Provides quick, quiet and comfortable operation preventing user fatigue • Performs well at any angle, gets into hard to reach areas • Overall Length: 10-7/8”

Item # Desc. Sizes Sale

AOPR14 1/4” Air Rivet Tool

1/4”, 3/16”, 5/32”, 1/8”, 3/32”

$134.79

AOPR36 3/16” Air Rivet Tool

3/16”, 5/32”, 1/8”, 3/32” $108.00

Item # Style Pads Sale

VG19T 11” Fast Release Fixed $24.37

VG17T 6 “ Fast Release Fixed $15.47

Item # Style Size Grip Sale

WE2121 Window Regulator (25) 1/4” .032”-.140” $7.03WE2122 Superior Split Glass (25) 1/4” .520”-.620” $7.91WE2480 Scuff Plate to Sill GM, Ford (20) 3/16” .078”-.236” $10.20WE2630 Ford Chry License Bracket (15) 1/4” .187”-.375” $11.52WE3190 GM, Ford ,Chry. Wheel, & Roof Racks (25) 5/32” .04”-.275” $9.41WE3192 GM Vans Body Molding (20) 3/16” .04”-.0354” $9.49

Item # Pic Size Jaw Sale

VG8R A 8” Flat $22.24

VG9R B 9” Fork $26.51

VG9AC C 8” L Grip $25.85

VG6R D 6” Classic Fixed $14.07



VG9DR E 9” Classic Fixed Deep $18.86

VG18DR E 18” Classic Fixed Deep $36.33


VG6SP F 6” Classic Swivel $15.82



A

B

C

D

EF

Air Operated Rivet Guns

Popular Aluminum Automotive Specialty Rivets

Specialty Clamping Pliers

WE2121 WE2122

WE2630WE2480

WE3190

WE3192

C Clamp Style Sheet Metal Locking Vise Grip Pliers

SUSX280

PuNCH AND FLANGE AIR TOOLThis punch / flange tool has a head that rotates

360 degrees to enable you to punch 3/16” (5mm) welding fastener holes or rotate it to crimp flanges on sheet metal up to 14 gauge.

• 3/16” (5mm) hole punch• Crimps flanges on up to 14 gauge sheet steel• Weights only 2.9 lbs • Cuts sheet metal fabrication time in half

$106.33

EZPPT13

ROLL PIN PuNCH TOOLEliminates the need for a hammer and roll pin

punch work in tight or hard to reach areas • Removes and installs roll pins on Hydraulic

clutch lines up to 1 1/8” long

$22.04

TA198001/4 HEAvy DuTy RIvET GuN

$46.35

TA19830EXTENDED NOSE 1/4” HEAvy DuTy RIvET GuN

$60.07

81




RIVET GUNS & BODY SHOP SPECIALTY PRODUCTS

AODS1000

DOOR SKINNER TOOLForged and hardened steelcrimping head is speciallydesigned to roll the steel flanges over with a minimum of physical effort, and leaves the flange smooth without unsightly ripples. • Allows to maneuver around inner & outer curves

as well as most body design features. $192.82

TA8788018” uRETHANE CuT OuT KNIFE

$20.95

TA87890

24” uRETHANE CuT OuT KNIFE• For vehicles with sloped windows

$23.14

TA87900

WINDSHIELDREMOvING TOOLCOLD KNIFE

$19.05

TA87425

BRAIDED GOLDENWINDSHIELD CuT OuT WIRE• Braided Golden Cut Out Wire

$10.14


Astro Replacement Windshild Knive Blades

AOWINDK-08E 57MM Air Knife Bent $15.74

AOWINDK-08F 90MM Air Knife Straight $22.65

AOWINDK-08H 52MM Air Knife Bent Curved $22.37

AOWINDK-08I 48MM Air Knife Scrapere $21.99

AOWINDK-08K 18MM Air Knife Hook $19.81

AOWINDK-08L 35MM Serrated Straight $20.21

MA39001

MARSON DELuXERIvET GuN KIT IN CASE• An assortment of popular rivets• With service tool and 4 nosepieces mounted on

riveter$57.26

MH45049

CATS PAW BELT-MOLDING REMOvAL TOOL• Works effectively with most clips, fasteners and

molding assemblies, foreign and domestic• Two composite soft grip handle

• Used to remove broken windshields

• Sharp blade cuts urethane, pull handle gives leverage to help slice through windo moldings

$15.24

POPPS15-KIT

PRO MANuAL POP RIvET KITThis Rivet kit features a cast aluminum body,

vanadium steel and handle• Sets and includes Rivets: 3/32, 1/8, 5/32, 3/16”• Cushion Molded Vinyl

$79.12

GLMV24

24 JOB WINDSHIELD REPAIR KIT• This professional kitquickly allows on the road

glass techs to profitably fix bullseye holes and small cracks to the winshield.

• Comes complete in storage case with UV curing light, disposable application pads, urethane sealer, application suction hose, and complete detailed instructions on DVD.

• Kit will do approximately 24 jobs$205.13

GlassStar

AO1442

METRIC AND SAE 13” THREAD SETTING HAND RIvETER KIT• Includes Hand Nut/Thread Setting Riveter• 6 interchangeable mandrel/nosepiece sets in

Metric M5, M6, & M8 and in SAE 10-24, 1/4-20, & 5/16-18

• Includes 10 pieces of each of the following rivet nuts: M5, M6, M8,10-24, 1/4-20 and 5/16-18

$101.85

DNTDF-CT887 $97.80

SLIM LINE PLASTIC RIvET GuN• Use on vehicles where plastic rivet clearance is

minimal. • Plier is 1” tall and requires 2” clearance to fully

pull rivets. • No pumping needed. Saves time and

disassembly effort!

MA39005

360 DEGREE LOCKING SWIvEL RIvET TOOL• Locks into 40 different positions• Manual Rivet Tool, Sets 3/32, 1/8, 5/32, and 3/16

In Rivets$74.42

AO1420

DIAL HEAD HAND RIvETERDial a rivet size with 4 Heads - 1/8”,5/32”, 3/16” & 1/4” • Turn dial to find the correct rivet size needed for

the job• Ergonomic handle• Plastic container to collect the spent mandrels

for safety and ease of disposal

$28.92

AO1427

HAND NuT RIvET KIT• Ergonomic handle design for user’s comfort• Hand Screw design for loading and unloading

the nuts• Unique hidden spring design for the return of

the handle • Compact & Lightweight, Sizes Included M5, M6,

M8, M10 & M12

$58.92

AO1423

HEAvy DuTy 13” HAND RIvETER• Shortest long arm riveter which can operate up

to 1/4” • Includes 5 Nosepieces: 1/8” (3.2mm), 5/32”

(4.0mm), 3/16” (4.8mm) and two pieces of 1/4” (6.4mm)

• Core collection bottle for safety & easey disposal

$35.87

AOWINDKO

AIR OPERATED WINDSHEILD KNIFE• Sealant cutter that cuts around bonded and

encapsulated glass• Includes 57mm Bent Blade, 52mm Bent Curved

Blade, and 35mm Flat-Nose Straight Blade$124.00

82




Heat Guns and Soldering Tools

IAES670CK

• Butane Powered Portable Multi-Function Heat Tool• 2 hours run time on each refill• Approx. Temp - 2500F, Operating time - 120 min

- mid setting• Includes, 10 mm Chisel Tip, 1.6 mm Conical Tip,

3.2 mm Chisel Tip, Hot Blower, Heat Reflector, Hot Knife

$79.18

BuTANE POWERED PORTABLE MuLTI-FuNCTION HEAT TOOL KIT TA87250

ECONOMy HEAT GuN• High performance, hot air source that delivers

concentrated, heated air to the job.• Use in autobody, automotive, industrial, marine,

home, farm and numerous other applications.• Has two heat selections: 750 F and 1,000 F.• Operates on 120 volts, 10 amps, 1200 watts.

$54.24

IAPRO180K

BuTANE SOLDERING KIT POWERED WITH REFILLABLE ENERGy CELLS• High output, 185W, W/Chisel Tip 240F.• Includes: torch, blower for heat shrinking,

conical tip, wire cutters, stainless steel cleaning brush, solder sucker, cleaning sponge, solder, flux and extra LEC

$135.38

IAPRO100K

BuTANESOLDER KIT• Automatic Ignition• 5 tips Conical, Chisel,Hot Knife, Heat Blower & Deflector• 30w-100w Power Range• Soldering tip hi temp - 950°F• Torch hi temp 2500°F

$94.77

IAPT220

PROFESSIONAL HANDHELD BENCH TORCH• Automatic Ignition, removable safety stand

Included 1300°c/2500°f$54.36

IAPT200

CHILD RESISTANTBuTANE TORCH• Child Resistant ButaneTorch W/Automatic Ignition

$32.31

WKLG400C

150-400 WATT SOLDERING GuN KIT• High performance gun designed for continuous

use in industry, repair shops and maintenance departments.

• Tip and element assembly (LG400TE) is replaceable as a complete unit

$103.38

WKWG992K

200/110 SOLDERINGGuN KIT• Includes: Soldering Gun, Smoothing & Cutting

Tips And 1/2 Oz. Lead Free Solder In Storage Case

$85.98

WKWG991KCS

150/100 WATT SOLDERING GuN KIT• 150/100 Watt Soldering Gun Kit• Includes: Gun, One Each Smoothing & Cutting

Tips And 1/2 Lead Free Solder$63.30

IAPRO150K

SOLDER PRO 150 AuTOMATIC KIT• Equivelent to a 125 Watt Iron• Torch function provides 2400º Blue Frame

$118.46

CE3H202K

DIGITAL vARIABLE TEMPERATuRE HEAT GuN KIT• 6 Temperature settings for precise control• Temperature range from 250D - 1200F• LED Display cleary marks level of heat• Automatic cool down for 80 seconds after unit is

powered off• Kit includes case and directional adaptors

$83.47

IAHG-300

BuTANE SAFETy HEAT GuNButane & Battery Operated Heat

Gun• Temperature Range 400°F - 800°F• Complete with 4 Alkaline Batteries

(can also Use Rechargeable Nicad Batteries)

• Heat Reflector Tip Attachment Included

• Butane Fill Lasts for 1 Hour in Mid Temperature Setting

• Diode Indicates Blower Motor Operation, Low Battery Life, and Cool Down Modes

$123.08

Item # Temp F Sale

EYEP5ULM 500-700 $115.38EYEP7ULM 750-1000 $115.38

Eddy Pro Heat Guns include a stand for hands free operation. Each delivers superior air flow, 27 C.F.M air volume at 3300 F.P.M velocity for best application available.

Professional Heat Guns

EYVT1100

COMPACT PRO HEAT GuN• Temp: 250°F. - 1100°F., 120 Volts• 10 Amps Superior air flow 14 CFM• Break resistant heat element • Built in safety stand. Two speed motor.

$41.76

WKLG400C

HEAvy DuTy SOLDERING IRON GuN• High performance gun designed for continuous• Tip and element assembly (LG400TE) is

replaceable as a complete unit.

$103.38

WKL80

80 WATT SOLDERING IRON• Heavy duty iron that handles

those bigger jobs more efficiently• Use for heavy wiring, automotive,

sheet metal and plumbing.

$39.56

83




TORCHES, POWER INVERTERS AND SHOP FASTENERS

Item # Pic Desc. Sale

WEPLA-801 A 315 Piece Push And Screw Rivets Assortment

$102.86

WEPLA-802 B 475 Piece Christmas Tree Retainer Assortment

$81.23

WEPD121 C Fastener Assortment, Plastic Rivets

$38.24

WEPD122 D X Mas Tree Fastener Assortment

$28.57

Large Plastic Drawer Body Shop Assortments featur-ing OEM Fasteners for All Domestic and Most Import Vehicles.

B

C D

A

PWTPW900-12 900W Continuous 1800W Peak. Built-in Cooling Fan. External, Replaceable 3 x 30 Amp spade-type Fuse, 8 AWG Gauge Wires Included, Overload Indicator

$106.67

PWTPW1500-12 1500W Continuous 3000W Peak, Input DC Voltage Range 10-15.5VDimension (LxWxH) in 11.61 x 10.24 x 3.46

$246.15

PWTPW2300-12 2300W Continuous 4600W Peak. Built-in Cooling Fan Overload Indicator Power ON/OFF Switch. Dimension (LxWxH) in 13.78 x 10.24 x 3.46

$365.13

PWTPW3500-12 3500W Continuous 7500W Peak. Built-in Cooling Fan Overload Indicator Power ON/OFF Switch. Dimension (LxWxH) in 19.92 x 8.9 x 6.1

$564.10

PWTPW6000-12 6000W Continuous 12000W Peak. FOUR - 3 Prong 120 Volt AC outlet Provides 50 Amps. Dimension (LxWxH) in 26 x 8.9 x 6.1,

$902.56

PWTP900-12 PWTP1500-12 PWTP2300-12 PWTP3500-12 PWTP6000-12

The PowerBright 12 Volt Modified Sine Wave Inverters are Manufactured with an anodized aluminum case to provide durability and maximum heat dissipation..

TA23250

HEAT SHRINK TuBE ASSORTMENT• 160 assorted pieces in 8 sizes and 5 colors• Easily shrinks with a Heat Gun or other heat source• Protects solder joints and wires• Forms a secure bond over smooth and irregular shapes. Sizes 3/32” - 3/4”

$16.92

IAAT2060

POCKET TORPEDO TORCH WITH AuTO IGNITE• Butane refillable, anodized steel body• 30-minute burn time per fill• Flame temperature of 2500°F

$15.38

PT011289210

Repair All Types of Plastic Damaged Parts in Any Industry!• Thin plastics parts and sheets can be welded• No uncontrolled heat transfer means less

wrinkles in parts to be welded. • Problematic plastics that absorb water are easy

to weld• No special training needed. • Transfers heat through contact as opposed to

hot air.$177.36

PT010182000

TECHNIC IRON FLINT LIGHT BuTANE SOLDER TORCH“Pen-Like” Technic is standard issue in many industries Cordless flint ignition• 60 minute run time. Adjustable power 10-60 watts

$31.85

PT010280060

PROFESSIONAL SOLDERING IRON FLINT LIGHT• Cordless flint ignition, Maximum temperature of

752F• 60 minute run time• Adjustable power 10 to 60 watts

$31.87

PT010280160

MuLTI FuNCTION GAS PROFESSIONAL SOLDERING KITCordless flint ignition with adjustable power 10-60 watts • 60 minutes run time between • Maximum temperature of 752F • Includes tips and standard accessories

$55.80

PT010580430

SuPER PRO 125 GAS SOLDERING TORCH KITDurable all round favorite Kit featuring an ultrasonically welded gas tank for better strength, safety and reliability. Made with butane compatible plastics - prevents gas leaking

$109.85

PT011880070

MuLTI PuRPOSE 220 WATT GAS POWER TORCHSelf igniting, refillable, butane gas powered, high performance, multi-purpose mini torch• Temperatures up to 2,462F • Can be used upside down and in hard to reach

areas $49.54

PT012680040

HIGH POWER 820 BuTANE TORCHSelf igniting, refillable, butane gas powered, high performance torch creates a massive 2,797 btu/h flame power.• 820 watts with Temps up to 2,462 Fahrenheit.

$55.05

PLASTIC BuTANE WELDING KIT

OT5953

DuAL END WIRE HOLDER• Holds wire and

connectors solidly during soldering

• Insulated clips act as heat sinks to protect shrink tubing or other sensitive parts from heat.

$20.73

OT5955

MAGNETIC CLAMP WIRE HOLDER• Clamp with magnet allowsfor attachment to a work bench, vehicle, or anyother object for a firm base.

$57.08

84




WINDOW TRIM AND DOOR TOOLS

TA82350

DOOR ALIGNER TOOL• Align car and truck doors with either bolted or

welded hinges in seconds by using leverage• Pulls door against tool to prevent distorting the

metal around latches$52.84

TA87650

TRIM PAD REMOvAL TOOL• For most GM cars from early 1970s

$9.12

TA878207” TACK PuLLER

$6.06

VMV2300

PuSH PIN PLIERS SET• Includes 45 degree and straight pliers. Works

well on U Joints and body fasteners$83.19

VMV231

45 DEGREE OFFSET PuSHPIN REMOvAL PLIERS• Works well on U Joints and body fasteners

$41.21

TA87965

16” LONG STICKER SCRAPER• Includes 5 steel blades and one plastic stored

in handle$10.48 TN11030

SINGLE EDGE SCRAPER• Taper Grip

$8.13

KD84050

4 PIECE DOOR PAD AND PANEL REMOvAL KIT’• Set includes “V” notch

puller, “square” notch puller, scraper, and curved blade “v” notch puller


$38.75

KY77175

HuSTLER STICK• Indispensable when versatility of a chain

hookup is needed• Aligns bumpers, panels, hoods, decks and

brackets• Heavy duty 1-1/4” diameter tubing with two

welded hooks for strength and versatility• 6’ long 1/4” chain, with hooks on both ends

$164.86

EZMS1900

20” LONG MONSTER SCRAPER• Extra long 19” length.• Rugged aluminum body.• Comfortable poly foam grip.• Store up to 15 extra blades in handle.

$18.98

EZMS3000

3 PIECE MONSTER SCRAPER SET• All aluminum construction. 3/4” foam handle for

a super grip.• Includes 3 scapers and 5 blades in case.

$34.84

TN12037 $9.25

Item # Style Sale

KD3702 2 Pc Set $53.11

KD3703 Straight $29.18

KD3704 45 Degree $28.92

Used For Upholstery Work. Pliers Are Spring Loaded To Hold Hog Ring In Jaws During Use

OT4706

2 PC uNIvERSAL LIFT SuPPORT CLAMPEasy to use clamps designed for placement

on hood/lid strut rods preventing the body component

from falling of sagging. • Small design keeps access to the compartment

unobstructed.$33.41

CV56

RECESSED BODy CLIP PLIERS• Designed with the ability to remove push pins

and body clips from bumpers and other areas.• Features a long reach with specially designed

ends that help pop the clip off, so that the user does not damage the clip by twisting or prying.

$26.01

CV117

• Can be used on trim fasteners and moldings inside, or outside, the vehicle.

$26.04

PLASTIC TRIM FASTNER/MOLDING REMOvER SET

CV118

11-PIECE TRIM TOOL SETDesigned to remove trim strips, panels, wheel

caps, bezels, liners, shrouds, fascia,etc.• Tools are constructed of durable, impact-

resistant nylon$60.36

CV125

uPHOLSTERy TOOL SETFeatures high Polish Stainless Steel Blades • Includes 2 V-Notch and U-Notch tools, and a

reverse-U Door panel Tool$47.34

VMDT6000

3 PIECEuPHOLSTERyTOOL SET• Upholstery Tool Set

$32.86

VMV613SET

DOOR CLIP PANEL REMOvAL TOOL• 10” and 18”

$26.13

RETRACTABLE MINI RAZOR SCRAPER• Smooth retracting/locking blade advance• Includes 3 extra heavy duty .02” razor blades• Available in 9pc Counter Display

85




DETAILING PRODUCTSWINDOW TRIM AND DOOR TOOLS

Premium Quality Detailing Accessories

HTHB175 A Velcro Wool Cutting Pad 7.5” Compound Pad. 1.5” Wood Pile Washable, with perfect balance, 7/8 in. arbor

$11.67

HTHB3175 B 3.5” Mini Pad Wool Cutting. 4-ply yellow wool blend pad for light/medium cut compounding

$5.77

HTHB32 C 3.5” Mini Pad Orange Foam 3 in. orange euro foam pad for medium surface cleaning, buffing and polishing

$5.77

HTHB3375 D 3.5” Mini Pad Wool Blend Cutting for light/medium cut compounding

$5.77

HTHB35 E 3.5” Mini Pad Black Foam for liquid wax application and swirl/mark removal for a super-high luster finish

$5.77

HTHB3672 F Mini polishing kit for cordless drills $31.26

HTHB375 G 7.5” Polishing Pad. 1.5” Hybrid Wool Pile Velcro Wool Blend Light Cutting Pad, 7/8” Arbor Hole..

$12.26

HTHB5FC H 8” Black Waffle Fine Polishing Pad 2 Pack. Use for ultra smooth surfaces.

$24.10

HTVP11 I 7” Velcro Backing Plate. Use with any 7” - 9” pads that have loop material on backing.

$22.95

HTVP3 J 3.5 in.with Mini Velcro Backing Plate for quick and secure pad attachment. Fits full size polishers or 3/8” or 1/2”hand drill when used with the included adapter.

$13.97

MM39003

FINESSE-IT FINISHING MATERIAL MACHINE POLISH• 16 fl oz, Use with a polisher to

quickly and effectively remove minor scratches, producing a brilliant, deep, wet look shine.

• Contains no wax or silicone and is clear coat safe.

$21.66

MM39006

ONE STEP CLEANER WAX LIGHT OXIDATION REMOvER• 6 oz Removes most fine scratches, light

oxidation, swirl marks, and minor stains, leaving a deep, rich lustre and a durable waxed finish.

$15.24

MM39017

PLASTIC CLEANER• 8.0 oz Bottle Safely removes fine

scratches, stains or haziness from automotive plastics.

$7.84

MM39026

PERFECT IT SHOW CAR LIQuID WAX• 16 oz Shines and protects

new and like-new paint finishes, producing a deep, high gloss, lustrous, durable “wet look” finish.

$15.65

MM39034

PERFECT-IT GLOSS ENHANCER• 16 oz Quick and easy,

“spray on/wipe off” product that can recapture that just-waxed look and feel. Excellent for use on dry panels between waxings.

$9.62

MM39036

TIRE & WHEEL CLEANER• 16 fl oz Quickly, safely and

beautifully cleans wheels and tires in one easy step.

• Removes brake dust, road tar, grease andgrime.

• Leaves wheel with a brilliant shine and cleans the toughest scuffs and soil from side walls.

$8.72

AO1208A

LOW SPEED ERASER TOOL 4000 RPM• Pinstripe Removal Tool with Blue Rubber Sleeve and

Safety Lever - 4,000rpm with Smart Eraser® Pad• Geared at 4,000rpm, Lightweight - reduces

operator fatigue$73.74

A

B

C

D

EF

I

J

PolishingProducts

• Orbital Action with, direct drive movement creates a highly efficient, vibration-

free operation powerful, at 3000 RPM• 110V with a 6’ cord, high-speed performance

that is safe for all finishes• Ergonomically-designed handgrips for 1- or

2-handed use• Includes Terry Cloth and Polishing Bonnets

TN22610

10” ELECTRIC ORIBITAL POLISHER

$45.19

HTFC-6P

8” ASSORTED WAFFLE POLISHING PADS6 Assorted foam bonnets for mild to aggressive polishing. • These use the hook and loop velcro style backing for easy mounting, and are self centering FREE Velcro Backing Pad and centering device

$63.82

FREE

VP22504

7” POLISHER KIT• Adjustable dial speed control, with 11 amps of

power• Lock-on switch for comfort during extended use• Auxiliary handle mounts either side for left or

right-hand use • Includes Velcro pad for sandpaper, and rubber

pad for polishing bonnet

$133.27

PC7424XP

• Electronic variable-speed dial 2,500-6,800 OPM• Random orbit, swirl-free sanding/polishing

action• Includes 6” proprietary counter balance for use

with 6” sanding/polishing pad• Accepts 5/16 - 24 spindle thread accessories

$155.44

6” vARIABLE-SPEED RANDOM ORBIT POLISHER

86




SANDERS POLISHERS AND GRINDERS

MEMGSD-01

PAD PRO FOAM PAD CLEANER• Rotating paddle blasts away heavily loaded,

dried, caked-on compound• saves time by cleaning pad on buffer• quickly cleans clogged pads - wet and dry

$28.81

MK9557PBX1

4-1/2 ANGLE GRINDER• 7.5 AMP motor design for high output power in a more compact tool• Includes: Four (4) 4-1/2 inch Grinding Wheels (741424-8-1), One (1) 4-1/2 inch Diamond

Blade, Wheel Guard (125273-5), Lock Nut (193465-4), Lock Nut Wrench (782422-3), Side Handle (153489-2), Inner Flange (224399-1) and Aluminum Case

$131.52

MK9227CX3

7” ELECTRONIC SPEED CONTROL POLISHER KIT• Electronic speed control maintains constant

speed under load, Easily converts to a sander• 10 Amp with Speed Dial 600 - 3000 rpm • 3 prong plug to prevent static electricity

accumulation• Fast and powerful polishing for clearcoat finishes• Lock-on button for continuous use at one speed• Includes: Wool Pad, 743403-A Wool Polishing

Bonnet, Velcro backing pad & 821007-X Tool Bag.$292.25

Item # Size Price

Decal Removal AccessoriesDNT-702C Coarse Brush $28.86

DNT-702F Fine Brush $28.86

DNT-702M Medium Brush $34.04

DNT-705 MBX decal eraser wheel $50.66

DNT-705D Offset Decal Eraser $23.08

DNT-700DX

ELIMINATOR PNEuMATIC GRIME AND DECAL REMOvER• Removes rust, scale, undercoatings, seam

sealers and other residues easily and cleanly, right down to the bare metal.

$557.68

DECALREMOvAL

ACCESSORIES

BDDW443

6” RIGHT ANGLE RANDOM ORBIT SANDER WITH ELECTRONIC• Electronic Variable Speed from 4,300-6,800

rpm provides greater control of material removal rate

• Controlled Finishing System maintains pad speed and minimizes gouging during start up

• Dual-plane counter-balanced fan reduces user fatigue

• Accepts 6”, 6-hole hook and loop paper$240.73

MK9557PB

4-1/2” ANGLE GRINDERExtra Large Paddle Switchfor Comfortable Operation• Powerful 7.5 AMP motor for high output power in

a more compact tool (only 4.5 lbs.)• Lock-on/off feature for continuous operation• AC/DC switch for use with alternative power

source$89.54DWP849X

7”/9” Electronic Polisher with Protective Cover

$259.52

DWP8497”/9” Electronic Polisher

$237.77

Best in Class Speed Control Dial 20% lighter than current DW849 • Electronic Variable Speed 600-3,500 RPM • Two Finger Trigger• Extended Life Steel Cut Gears, Mesh Vents resist wool

intake

ELECTRONIC POLISHERS

TN22707

7” ADJuSTABLE SPEED CONTROL POLISHER SANDER• 3000 RPM, 11 Amp Motor• Interchangeable D-handle and side handle

mounts either side• Lock-on switch for comfort during extended use• Includes hook & loop disk, polishing bonnet,

and rubber pad

$120.02

DEARS1207

12v 3” LI-ION MINI POLISHER KITGreat for Doing Quick Spot Detailing • 0 – 2,600 RPM• Tool Weighs only 1.94 Lbs• Variable Speed trigger with two positioned side

handle$215.33

MWK6147-30

4.5” ANGLE GRINDERPowerful 11 Amp, 11,000 RPM Motor: Provides

maximum performance and durability• Tool-Free Accessory Change: Easily change “All

Accessories” without a wrench$125.00

MW5540

7” POLISHER 11 AMP TRIGGER SPEED CONTROLPowerful 11 amp polisher with a spindle lock to

provide convenient accessory changes. • Aluminum Gear Case with Protective Urethane

Bumpers• Dial Speed Control, 11 Speed (No Load) RPM -

0-2800• 10’ Length Quik-Lok® Cord Set Included - Quick

detachment from tool for tangle-free carrying and storage.

• Includes: One 7” rubber backing pad, disc nut and nylon washer

$272.05

FREE!

FREE Bag and Bonnet!

DWE4011

4-1/2” SMALL ANGLE GRINDER7.0 Amp AC/DC, 12,000 rpm motor designed for

faster material removal and higher overload protection

• One-Touch™ Guard eliminates • 2-position removable side handle • 5/8”-11 spindle

$76.71

87




SANDING AND FINISHING

TA94820

7” QuICK CHANGE BACKING PAD• 7 x 1/4” x 5/8”-11 Hub Nut• Max Speed 7750 RPM

$16.52

TA87975

BuFFING BONNET CLEANING TOOL• Cleans and revitalizes in one operation.

DBAF44L

6PC DuRA-BLOCK SANDING KIT• Works great for wet

or dry sanding. • Includes ridged 2

3/4” x 5 1/2” and 11” blocks, and 3 semi-flexible blocks 1 1/4” round x 11” long, 1 5/16” wide x 10 7/8” long and 2 1/2” wide x 5 1/4” long (Not for use with adhesive backed paper.)

$75.74

$9.03

LE12132-HT50

HEAvy DuTy TuBE FRAME HACKSAW• Angled frame allows for 20% more cut per stride

$43.79

MM07447

MAROON MEDIuM DuTy SCuFFING PADS

$27.55

MM07448GRAy uLTRA FINE SCuFFING PADS

$27.55

SCOTCH-BRITE HAND SCuFFING PADS6” x 9”, 20 pads per box• Use for final sanding of primer-surfacer. • Does not rust like steel wool. • Use on its own or with with Paint Prep Gel for

improved performance.

Item # Sizes Sale

TA89800 5” $4.59TA89810 9” $9.23

Item # Stroke Sale

AO322 3/16” $116.12AO325 3/32” $121.74

Item # Size Type Fits Sale

MM05576 6” Stickit Standard 5/16 $39.08MM05581 8” Stickit 5 Hole ND/Dyn $51.69MM05776 6” Hookit Standard 5/16 $40.41MM05779 8” Hookit 5/8” Sanders $63.94MM05856 6” Hookit DF 5/16” Dust Free $34.17

Item # Pic HP Sale

SUSX5205 A 0.5 $109.85SUSX5205L B 0.5 $116.77SUSX5206 C 0.5 $128.75SUSX5210 D 1 $142.62

Professional Style Backing Pads for Popular Air Sanders and DA’s

HEAvy DuTy SANDING BLOCKS

AO232

ONyX PIN STRIPE REMOvAL KIT

$195.55

Onyx tools with ergo compositehandle reduces fatigue andvibration. Includes Pinstripe Removal tool and 12 SmartEraser® Pads (Model# 400E)• Specialty tool developed for the removal of

Pinstripes, Adhesive, Double Faced Tape and Molding with ASTRO’S Smart Eraser® Pads

• Tool includes built-in regulator, 4000 Max. RPM

SUSX8200

SuRFACE BLASTER KITUse for removal of grime, dirt cake, adhesives,

tape, vinyl or any attached product to metal surfaces.

• Kit includes: 1pc surface blaster, 1pc stripping wheel, 1pc rubber eraser wheel, 1pc hub, 3pc wire wheels (fine, medium, coarse)

$467.46

6” High Power DA Sanders

Composite HD Die Grinders

Super lightweight Only 1.5lbs. • Sealed Bearings for Extended

Life. Orbital action assures final swirl-free finish

• Built-in speed regulator and 6” Velcro Backing Pad

Light Weight, Low Sound, High Power• Ergo handles help avoid slippage• 1/4”Collet and Speed control makes tools

versatile for most grinding jobs

A

D

BC

C

DBAF44HL

DuRABLOCK HOOK AND LOOP SANDING PAD SET• 7 pc Hook & Loop Kit • Full range of sanding blocks included for use

with Velcro style sanding paper

$89.73

SUSX7235

5” REvERSIBLE HIGH SPEED SANDER• 16,000 RPM of speed • Comes with 3”,4”, and 5” backing pads to use

with multiple applications

$134.69

AO226

COMPOSITE ANGLE TOOL SuRFACE PREP KITONYX Complete Surface Prep Kit with Composite

Body 1/4” 90° Angle Die Grinder and Surface Prep Pads

• Composite handle reduces vibration• Includes: 3” Blue Woven Strip Discs, 3” Black

Woven Strip Discs, 3” Felt Polishing Discs, and 3” Mini Flap Discs

$126.52

SUSX7120K

MINI SuRFACE PREP TOOL2”-3” Mini Surface Prep Tool with accessories• 2” and 3” backing pads allow versatility

depending on the job • Composite housing for durability with light

weight • Variable speed trigger for feather touch speed

control throughout the range

$137.92

88




GRINDING AND SANDING EQUIPMENT

AO3059

• Ideal for restoring aluminum and magnesium Rims, Engine Parts, Motorcycle Parts and Plastics (1800 RPM’s)

• KIT INCLUDES: Variable speed Quick Coupler Air Buffer.0-3000RPM

$115.02

UN007

GRAvITy FEED SPEED BLASTER• Long life ceramic knozzle with adjustable

material control valve

$68.09

UNHS2020

• Converts Speedblaster IntoA Spot Blaster• Includes 4 Blast Cones ThatConform To Any Surface• Dust Free Spot Blasting

$45.01

ALC40017

50# BLASTER KIT (F-50)• Use dry abrasives only, Hose length - 7’, Tank capacity - 50 lbs.• Free standing open top tank, Maximum 125 psi, 7

CFM@80 psi minimum• Steel nozzles - 13/64”, 1/4”, 5/16”

$171.87

ALC40018

SIPHON FED SANDBLASTER 90LB• Hose length - 10 ft. Tank capacity - 90 lbs.• Strong tubular steel cart, Wheels - 6”• Maximum 125 psi, minimum 7 CFM @ 80 psi

minimum• Steel nozzles - 13/64”, 1/4”, 5/16”

$244.33

ALC41600

100 LBS ECONOMy PRESSuRE BLASTER

ECONOMy ABRASIvE PRESSuRE BLASTERS

• Pressure relief valve for safety. Includes soft hood with bump cap.

• Holds approx. 90lbs. of abrasives, Blasting Time: 30-45 Minutes

HD Deadman handle - all steel. Measuredin Gallons/LBS• Large ball valves and plumbing – 3/8”• 8’–3/8” pressure hose• Safety pressure relief valve• 4 nozzles and funnel

SPOT BLAST RECOvERy

FP751

1/4” MINI DIE GRINDER• Heavy Duty Bearings, 25,000 RPM• Compact Design

$54.95

FP752

1/4” MINI ANGLE DIE GRINDER• 22,000 RPM• Heavy Duty Bearings & Bevel Gear Drive• Compact Design

$80.00

FP753

1/4” DIE GRINDER• 22,000 RPM• Heavy Duty Bearings• Lock-off Throttle

$62.56

ALC40024

SANDBLASTING PROTECTIvE HOOD• Light to Medium duty hood provides complete

head coverage. Lens area 5” x 6”$49.91

$453.21

FP874

6” PALM GRIP ORBITAL SANDER• High Energy Non Stall Motor & Ball Bearings• Aluminum Housing With Rubber Comfort Grip• 3/16” Orbit for Fine Refinish Work• Sealed Ball Bearing Construction

$139.49

FP886A

6” DA AIR SANDER• High Energy None Stall Motor & Ball Bearings• Great For Rapid Material Removal & Paint

Preparation$86.15

TA17800

ABRASIvE SAND BLASTER

$32.92

TA18500

SPARK PLuG CLEANER• Abrasive material is included

and is silica free• Clean any size spark plug

quickly and effortlessly• Recommended air line

pressure is 70-80 PSI$38.73

Item # Gal/LBS Sale

ALC41001 5/40lbs $243.08ALC41002 10/80lbs $300.95ALC41003 20/160lbs $381.96

AIR BuFFER WHEEL POLISHER KIT

PortableBlastingEquipment

FP896B

6” COMPOSITE PALM SANDER• 12,000 RPM Free Speed• 5/16 x 24 threaded arbor• 3/16 orbit action• Weighs only 2 lbs, and 7” long

$116.92

• Easily blasts off rust, scale, carbon, chemicals and paint• Operates on standard compressed air.• Supplied with 10 feet of hose and hardened

steel nozzles - two with 13/64? I.D. and two with 1/4? I.D.

• Produces a steady stream of abrasive• Operates with any grade of abrasive.• Requires 1.5 CFM up to 8 CFM of air depending

on nozzle size used. AO222S

5” HIGH SPEED SANDERHigh speed, vibration-

free performance • Lightweight pistol grip

design offers greater control and comfort

• Built-in regulator for positive speed control

• Includes 3”, 4-1/2”, and 5-1/2” phenolic backing pad and hub wrench

$45.27

89




AIR SANDERS AND GRINDERS

AO3014

ONyX 6” COMPOSITE SANDER KIT WITH vACuuM ACCESSORIES• 3-in-1 tool designed for Central Vacuum, Self

Vacuum and Non-Vacuum• New muffling system reduces tool’s sound level• Includes hose, dust collection bag and 6” Velcro

pad• Pad Size: 6”, Free Speed: 12,000rpm• Overall Length: 8” only 1-1/2lbs.

$163.86

IR317A

5” AIR HIGH SPEED SANDER

$101.73

IR315

• 3000 Strokes per minute• Pad dimension 2 3/4” x 17 1/2”

$163.65

FP3801A

CuT-OFF TOOL• Cuts 3/4” Rolled Steel• Low Weight Impact Resistant Nylon Handle• High Energy Non-stall Motor & Ball Bearings• See Through Safety Guard 20,000 rpms

$81.03

FP706K

GASKET SCRAPER KIT• Removes Gaskets,

Adhesives & Corrosive Build-up

• Great General Purpose Tool

• Complete with 5 Varying Width Blades, Regulator, Oiler & Nipple

$72.82

• Light-weight and compact• On-board power regulator.• Includes three backing pads, 3”, 4”, 5”

(stackable).

Item # Style RPM Price

SUSX5201 Straight 25000 $96.70

SUSX5203 Angle 20000 $116.37

SuNEX HD 1/4” DIE GRINDERS

FP3751R

HEAvy DuTy DIE GRINDER• 20000 RPM with ¼” Collet 6-1/2” Overall

Length• Rear Exhaust High Energy Stall Resistant

Motor• Contoured Composite Handle Grip

$71.79

AO4606• 5/16” - 24 UNF thread

$15.98

AO46075” POLy SANDING vELCRO BACKING PAD

$13.54

6” POLy SANDING vELCRO BACKING PAD

IR3103XP

MINI SuRFACE PREP SANDER• Double-sided, adjustable speed

settings • Free Speed 15,000 rpm, Rated

Power 0.2 hp• Overall Length 5”

$132.69

Item # Pic Size Style RPM Features/Application Sale

IR311A A 6” DA 10,000 Built in regulator, general sanding $88.46IR328B B 8” Geared DA 825 Coarse 5/32 Orbit for heavy body filler sanding $181.35IR4151 C 6” DA Low Vib 12,000 Vacuum Ready 3/16 orbit for moderate sanding $203.46IR4152 C 6” DA Low Vib 12,000 Vacuum Ready 3/32 orbit, for fine sanding $203.46IR312A D 6.75 Jitterbug $190.19 FP750K

1/4” ANGLE & STRAIGHT DIE GRINDER COMBO KIT• Comfort Grip Tools Heavy Duty Bearings & Spiral

Gear Drive 25,000 RPM• Each are Compact Design with Rear Exhaust

$71.79

A B C D

CP870

6” DuAL ACTION SANDER

$86.33

• Modifiable aggression with a speed regulator to match speed to the job• Lock off throttle to prevent accidental start ups• Insulated grip provides comfort to operator• Applications: blending and smoothing filler,

feather edging and pre-paint preparationFREE speed: 10000 rpm and a ½ Hp powerto ratio motor

Quality sanders used for feather edging, metal preparation and finish work on body filler. Dependable performance, with balanced ball bearing construction. Pads Included.

Precision Air Sanding and Grinding Tools

AO3035

AIR BELT SANDER• Variable speed control, Free Speed: 16,000rpm• Increase pulley space for new thicker belts• Sanding Belts 80 and 100 Grit

$199.06

MWK6177-20

14”ABBRASIvE CuT OFF MACHINE• Large Cutting Capacity: Provides versatility for

a wide range of cutting applications, up to 5” pipe

• Oversized Wheel Guards: Provides added protection from debris

• 45 Degree Miter Capacity With Adjustable Fence:

$221.15

AO209

ONyX IN LINE 3” CuT OFF TOOL• Unique In-Line Design Provides Greater Control• Positive control and lock-out throttle protection• Adjustable protection guard, chrome plated

steel spark guard• Variable speed control, Wheel Size: 3”, Free

Speed: 15,000rpm• Overall Length: 8-1/4”

$120.41

AO217

ONyX 13” EXTENDED SHAFT DIE GRINDER• Extended shaft provides access for hard to

reach places• High speed, 1/4” collet• Positive grip body for easy control• All ball bearing construction for long tool life• Lever throttle for positive speed control• Rear exhaust air flow system

$139.67

TWIN PISTON STRAIGHT LINE SANDER

CP9780

AIR BELT SANDER• 20mm (0.9”) belt capacity WITH high power and

torque. Swivel air inlet• Arm locks in place for easy belt change

$312.40

Powerful 15 Amp, 4.0 Maximum Horsepower Motor

90




AIR SANDERS/GRINDERS AND POLISHERS

CP7202D

MINI DISC SANDER KIT• 15000 rpm direct drive.• Includes: 10 ea. Of 3 different kinds of sand

paper, Grits from 80-120$166.88

CP7200S

MINI RANDOMORBITAL SANDER KIT• 15,000 rpm 3mm orbit• Includes 10ea. Of 6kinds of sanding paper

w/grits ranging from 320-600

$165.25

MINI POLISHER KIT• 3500 rpm. Includes 3 polishing pads

$152.96CP7201P

SUSX7230K

3” MINI POLISHER KIT• 3” Hook & Loop Backing Pad allows for quick changes of pads • Reduction Gearing allows for reduced speed

and increased torque• Hook & Loop backing with with 3 assorted

polishing pads$165.67

Mini Composite Sanding And Polishing Kits• Composite housing for durability and light weight• Variable speed trigger for feather touch speed control

throughout the range • Two speed switch allows for speed control with high and low speed and can be moved to the other side of the tool for left

hand operation. Tools include a 2 year warranty

SUSX7131K

3” MINI RANDOM ORBITAL SANDER KIT• 3” Hook & Loop Sanding Pad allows for quick

changes of abrasives • Hook & Loop Sanding pad with 40 assorted

sanding discs$152.25

SUSX7120K

COMBO MINI COMPOSITE GRINDER KIT• 2” and 3” backing pads allow versatility

depending on the job • Includes pads and disks to get started

$137.92

IR3129K

MINI AIR POLISER KIT• Pistol Style polisher with variable speed triggar

and 2 speed switch (6000) RPM.• Polishing and compounding pads included.• Comes neatly organized in a tool tray

$185.77

Item # Pic Size RPM Length Sale

IR327 .5 HP Tire Buffer Quick Chuck A 3/8”x10 22000 8.5” $97.31

IR327LS Tire Buffer Quick Chuck Low Speed B 3/8”x10 3000 8.5” $132.69

IR314A Air Polisher with 5/8 x 11 Backing Pad C 7” 2500 9.3” $327.31

IR319A Vertical Air Sander with 5/8 x 11 Backing Pad D 7” 5000 9.3” $309.62

IR313A Horizontal Air Sander E 7” 5000 9.3 $300.77

IR3445MAX .88 Hp Air Grinder F 4.5” 12000 9.6” $367.12

IR345MAX .88 Hp Air Grinder G 5” 12000 9.6” $367.12

IR Top Shelf Abrasive and Polishing Solutions

Random Orbital Sanders with PSA or Hook and Loop Pads

Choose from Vacuum Ready or Standard Styles!

IR Tools Have Impressive Performance Over the Life of the Tool. RPM, Torque and Design Maximize Productivity for All Types of Finishing Jobs

B

D E

G

A

C

6” RANDOM ORBITPALM SANDERSSanding Power and Control for Smooth Operation and a Great Finish Every Time. • Choose from 3/32” and 3/16” orbits • Low profile design gets you closer to the finishing surface


SUSX7625 3/32 (2.5) Orbit Diameter $182.69

SUSX7650 3/16 (5.0) Orbit Diameter $182.69

F

AO322P

6” FINISHING PALM SANDER• High powered with a 3/16” Stroke Finish• Sealed Bearings for Extended Life• Compact for minimum operator fatigue• Orbital action assures final swirl-free finish• Built-in speed regulator

$116.12

Item # Motion Vac Pad Sale

IR8101MAX 3/32” No PSA $266.42IR8102MAX 1/16” No PSA $266.42IR8103MAX 3/8” No PSA $266.42IR8201MAX 3/32” Yes H&L $257.19IR8202MAX 1/16” Yes H&L $257.19IR8203MAX 3/8” Yes H&L $279.55

MAX Sanders Offer Comfort With Less Vibration and its Lightweight Ergonomic Design• MAX Power — Powerful 0.27 hp motor and variable-speed regulator, with double bearing design. Speeds up to 11500, depending on orbit motion size • Exhaust silencer includes a multi-stage noise suppression filter • Ergonomic grip is uniquely designed with an anti-slip rubber compound

91




GRINDERS AND CUTTING

Specialty Grinding and Cutting

AO202

1/4” ONYX COMPOSITE BODY DIE GRINDER MEDIUM• Ergo composite handle reduces fatigue and

vibration• 22000 rpm’s, lever throttle with lock and built in

regulator. Only 6.75” long

$51.71

ARC6210

STRAIGHT DIE GRINDER XL• 20,000 RPM with turbine generated power• Composite handle ergo designed with extra

long reach• Silent Power low noise level

$174.36

ARC6255

ANGLE DIE GRINDER• 20,000 RPM with turbine

generated power• Composite handle ergo

designed• Silent Power low noise level

$121.03

SUSX6210

3” HD AIR REVERSIBLE CUT-OFF TOOL• Reversible spark direction with 18,000 max. RPM• Strong 0.9 horsepower motor• Only 83 dBA. Weighs only 3.6 lbs.

$110.12

AO2181B

ONYX DIE GRINDER KIT WITH BURRS• Includes Composite Body 1/4” Medium Die

Grinder Rear Exhaust - 22,000rpm and 2181- 8pc. Double Cut Carbide Rotary Burr Set

$108.74

AO219

ONYX DUAL DIE GRINDER KIT WITH BURRS• Includes Composite Body 1/4” 90° Angle

Die Grinder Rear Exhaust, 20,000rpm, and Composite Body 1/4” Mini Die Grinder with Safety Lever, 25,000rpm, and 8pc. Double Cut Carbide Rotary Burr Set

$177.89

AO222

ONYX DUAL DIE GRINDER KIT• Includes Composite Body 1/4” 90° Angle

Die Grinder Rear Exhaust - 20,000rpm and Composite Body 1/4” Medium Die Grinder Rear Exhaust - 22,000rpm

$117.50

AO201

1/4” ONYX COMPOSITE BODY DIE GRINDER• Ergo composite handle reduces fatigue and

vibration• 25000 rpm’s, lever throttle with lock and built in

regulator. Only 6.75” long, rear exhaust

$46.20

AO204

1/4” ONYX ANGLE COMPOSITE BODY DIE GRINDER MEDIUM• Ergo composite handle reduces fatigue and vibration• 20000 rpm’s, lever throttle with lock and built in

regulator. Only 6.75” long

$79.14

Item # HP Pic Misc RPM Length Sale

IR301B A Angle Die Grinder Steel Body 0.25 Front Exhaust 21000 $86.69

IR301B2MK B 2” Angle Die Grinder Kit Steel Body 0.25 2” Scuff Pads 21000 $145.96

IR301B32MK C 2/3” Angle Die Grinder Kit Steel Body 0.25 2/3” Scuff Pads 21000 $159.23

IR301B3MK D 3” Angle Die Grinder Kit Steel Body 0.25 3” Scuff Pads 21000 $150.38

IR301BK E 2” Angle Die Grinder Kit Steel Body 0.25 Assorted Grinding Stones 21000 $106.15

IR302B F Angle Die Grinder Composite Body 0.33 Rear Exhaust 20000 $141.54

IR302BK G Heavy Duty Composite Angle Die Grinder Kit 0.33 Assorted Grinding Stones 20000 $234.42

IR307B H Straight Die Grinder Steel Body 0.25 Front Exhaust 28000 $75.19

IR308B I Straight Die Grinder Composite Body 0.33 Rear Exhaust 25000 $119.42

IR308BK J Heavy Duty Composite Straight Die Grinder Kit 0.33 Assorted

Grinding Stones 25000 $159.23

IR5102MAX K Max Angle Composite Handle Die Grinder 0.4 Throttle Lever 21/25000 $221.15

IR5108MAX L Max Straight Composite Handle Die Grinder 0.4 Throttle Lever 21/25000 $199.04

High Speed Air Die Grinders

These 14” Collet Die Grinders Feature Powerful Motors withPrecision Gearing. New Handles Help Techs Grip the Tool with Precision• Most Tools Feature: RPM’s up 22000 Max Series up to 25000 RPMS• Kits include high quality accessories for grinding and deburring

B D E

F

G

H

A

C

I J

K

L

Features a Spindle Lock which Makes Changing the Backing Pad Quick and Easy with Just One Tool!• Quiet operation and lowest vibration available

for an air sander/grinder


SUSX7770 2500 RPM $288.42

SUSX7870 4500 RPM $265.56

SUSX7860

6” GEAR DRIVEN SANDERHeavy Duty 1/2 hp motor• Metal gearing provides unmatched durability• Free Speed (rpm) 900

$223.83

92




AIR DIE GRINDERS AND ABRASIVE ACCESSORIES

CP875

ANGLE DIE GRINDER• Lock–off throttle• Includes 1/4” &

6mm collet

$82.21

AO2188

8 PIECE CARBIDE ROTORY BUR SETCoarse and fine teeth in one burrproviding rapid removal and smooth finishing• 30% more efficient than normal double cut

rotary burr• Includes 8 Burs: Ball shape (1/4”), Cylindrical

radius end (3/8” x 3/4”), Cylindrical shape (3/8” x 3/4”), Cylindrical end cut (3/8” x 3/4”), Tree shape radius end (3/8” x 3/4”), Tree shape pointed end 3/8” x 3/4”), Taper shape radius end (3/8” x 1-1/16”), Cone Shape (1/4” x 3/4”)

$119.24

Scotch Brite Condition Discs

Item # Size/Color Quan./Grit Sale

SR620TB 2” Brown 25 Coarse $19.81

SR622TB 2” Maroon 25 Medium $19.29

SR630TB 3” Brown 25 Coarse $34.32

SR632TB 3” Maroon 25 Medium $33.61

SR620TB-50 2” Brown 50 Coarse $39.05

SR622TB-50 2” Maroon 50 Medium $38.34

Item # Size/Color Quan./Grit Sale

MM01396 2” 50 $46.19

MM01397 2” 36 $48.72

MM01398 2” 24 $51.41

MM01406 3” 50 $50.44

MM01407 3” 36 $56.23

MM01408 3” 24 $60.90

MM05539 2” Arbor $23.82

MM05540 3” Arbor $31.49

Item # Size Color Grain Grit Sale

SR12613 2” Green Cubitron 36 $20.12SR12614 2” Green Cubitron 50 $20.12SR12615 2” Green Cubitron 80 $20.12SR12617 3” Green Cubitron 36 $23.62SR12618 3” Green Cubitron 50 $23.62SR12619 3” Green Cubitron 80 $23.62SR12621 2” Red Ceramic 24 $20.12SR12622 2” Red Ceramic 36 $20.12SR12623 2” Red Ceramic 40 $20.12SR12624 2” Red Ceramic 50 $20.12SR12625 2” Red Ceramic 60 $20.12SR12627 3” Red Ceramic 24 $23.62SR12628 3” Red Ceramic 36 $23.62SR12629 3” Red Ceramic 40 $23.62SR12630 3” Red Ceramic 50 $23.62SR12631 3” Red Ceramic 60 $23.62SR3220ZGT 2” Blue Zirconia 24 $18.65SR3230ZGT 2” Blue Zirconia 36 $18.65SR3250ZGT 2” Blue Zirconia 50 $18.65SR3280ZGT 2” Blue Zirconia 80 $18.65SR3320ZGT 3” Blue Zirconia 24 $21.30SR3330ZGT 3” Blue Zirconia 36 $21.30SR3350ZGT 3” Blue Zirconia 50 $21.30SR3380ZGT 3” Blue Zirconia 80 $21.30

Item # Size Style Grit Color Box Sale

MM07480 2” Scotch Coarse Brown 25 $29.07

MM07481 2” Scotch Medium Red 25 $29.07





MM07515 2” Scotch Sup. Fine Blue 25 $36.82

MM07516 2” Scotch Fine Gray 25 $36.82

MM07524 2” Bristle Coarse Green 10 $88.33

MM07525 2” Bristle Medium Yellow 10 $88.33



MM07528 2” Bristle Fine White 10 $88.33



Item # Width Pack Quality Sale

MM01988 1/16” 1 Economy $2.32MM01989 1/32” 5 Pro $40.88MM01990 1/16” 5 Pro $40.88MM01991 3/8” 5 Pro $40.16

Item # Size Style Pack Sale

TA94520 2” Twist Arbor 1 $5.95

TA94530 3” Twist Arbor 1 $6.74

TA94540 2” C/Med 5 Pc. Kit $16.58

TA94560 3” C/Med 5 Pc. Kit $20.27

Item # Size Arbor Pack Sale

TA94860 3” x 1/16 3/8” 5 $10.16TA94870 3” x 1/16 3/8” 50 $57.56TA94890 3” x 1/16 3/8” 100 $108.88TA94900 3”x1/32” 3/8” 5 $10.16TA94935 3”x1/8” 3/8” 5 $9.98TA94950 1/4” Arbor 1 $5.86

MADE IN THE USA SURFACE CONDITIONING DISCS WITH ARBOR TABSGreat for use with high speed air tools such as sanders and die grinders to aid in the removal of gaskets, grime and petroleum build-ups.

These 2” and 3” Grinding Discs are Available in 3 Different Grades general grinding of paint, rust, and light weld spatter.• Green Cubitron used for general use• Red Ceramic Alumina use where higher cutting rates and cooler grinding are needed such as Stainless Steel, Titanium, and Alloys• Blue Zirconia Alumina which includes a special grinding aid that speeds work on harder metals and alloys.

Premium Grade Grinding Discs25 Per Pack

TA94950

Scotch-Brite Surface Conditioning Disks are best suited for removing cork or paper gaskets and form-in-place gaskets. Radial Bristle Disks Cleans without removing base material.

Hardened cut-off and grinding wheels by 3M are tipically used with cut off tools or die grinders to cut conduit, or remove weld.

Abrasive reinforced wheels are ideal cutting through clamps, hangars, sheet metal, angle iron, tubing, castings, mufflers and rusted bolts. Use with proper safety equipment.

3” Cut Off and Grinding Wheels

Grinding Disks

Cut-Off and Slag Grinding Wheels

Green Corps Gringing Disks come 25 per box and are used for rust, weld, and paint removal. Disks fit the 3M #05539/ 05541 Roloc arbors and are generally used with high speed air grinders

93




AIR DIE GRINDERS AND ABRASIVE ACCESSORIES AIR HAMMERS AND ACCESSORIES

CP717 $904.33

TA94450

QUICK CHANGE CHISEL RETAINER FOR IR• Securely holds .401” shank chisels on IR 121,

132 & 772 Air Hammers• Safe to use, fast to change chisels• Just pull back collar to install and remove

chisel• Retainer becomes part of tool eliminating need

for other retainers

$21.90

CP7150K

INDUSTRIAL POWER AIR HAMMER KIT• Long Barrel with additional power to chicp away

at steel, concrete or other ferrus metals• Chisels and spring included for the most

popular applications$112.63

FP660

SUPER DUTY .498” SHANK AIR HAMMER

$400.00

CP714

HEAVY DUTY LONG BARREL IMPACT AIR HAMMER

$551.63

Item Shank BPM Barrel Notes SaleIR117 .401” 2000 Long General Use $88.46IR121K6 .401” 3000 STD Kit Box w/Chisels $154.81IR121Q .401” 3000 STD Super Duty $143.31IR132 .401” 1725 Long HD Long Stroke with Auto Retainer $776.74IR118MAX .401” NA Long HD Long Stroke with Auto Retainer $190.19IR118MAXK .401” NA Long Kit Box w/Chisels and Auto Retainer $212.31IR122MAX .401” NA Short Auto Retainer $190.19IR122MAXK .401” NA Short Kit Box w/Chisels, Auto Retainer $207.13

SUSX9200

LOW VIBRATION AIR HAMMER• 2,800 blows per minute 3”stroke, .401 SHANK• Quick change chuck aids to replace

accessories quickly and easily

$122.75

Make fast work of body panel crimping and cutting, bushing, driving, shearing and general front end work with IR Air Hammers. The New Max Series features low vibration, increased power and Quick Change Retainers.

ZIP GUN AIR HAMMERS

Item # Style Shank Price

TA52000 8 Piece Air Hammer Tool Set .401 $58.11

TA91050 Tail Pipe Cutter .401. $13.69

TA91125 Short Smoothing Hammer .401. $17.74

TA91140 7” Smoothing Hammer .401. $22.13

TA91150 1-1/8” Chisel Scraper .401. $14.41

TA91250 Claw Panel Ripper .401. $18.96

TA91300 Tail Pipe Cutter .401. $14.75

TA91350 Double Edge Milled Cutter .401. $18.73

TA91400 5/8”” Flat Chisel .401. $12.83

TA91450 Tapered Punch .401. $14.41

TA91500 Rivet Buster .401. $13.69

TA91550 “V” Spot Weld Breaker .401. $18.35

TA91600 Fast Clean Panel Cutter .401. $16.63

TA91650 Wide Scraper .401. $17.92

TA91750 Dual Muffler Cutter .401. $16.86

TA91900 10.5” Flat Chisel 3/4” Wide .401. $16.63

TA91950 2” Wide Scraper .401. $19.91

TA91975 18” Chisel 3/4” Wide .401. $22.26

TA92100 7” Flat Chisel .498. $21.06

TA92125 Rivet and Bolt Cutter .498. $26.22

TA92150 1-1/4” Wide Short Hammer .498. $22.46

TA92175 Wide Cutting Chisel .498. $22.51

TA92250 Double Blade Panel Cutter .498. $28.64

TA92300 Straight Punch .498. $20.00

TA92325 Tapered Punch .498. $21.06

Air Hammer Bits and Accessories

IR132

IR118MAX

IR117 IR121Q

IR122MAX

IR122MAXK

IR121K6

IR118MAX

• Best for Heavy chipping, bolt cutting and pin driving. • Positive action trigger and valve for precise control • Precision engineered and heat treated

components for added reliability • .498-Inch shank super duty hammer, 3/4” Piston

and 4-5/8” stroke for extra heavy duty work.

• 2000 blows per minute. Specifications: Shank opening:• -401” Bore Diameter -9/16”Piston Stroke-3

1/8”Avg.

CP7110K

HEAVY DUTY AIR HAMMER KIT• Reduced vibration composite handle• 401 Shank Opening, 3200 Blows per min @90 PSI,

Piston Stroke 2.63”, Air Inlet 1/4” NPTF, Min. Hose Size 3/8”. In case with 4 Chisels

$140.58

HEAVY DUTY .498 AIR HAMMERlarger chisels and tool torque. • Positive action trigger for precise speed

control. • 1800 blows per minute.” Piston Stroke: 2

11/16”

LS60260

SEIZED FASTENER REMOVER SET• Low profile, heat-treated sockets

center the pneumatic driver on the frozen bolt.

• Six socket sizes fit up to .830” hex.$51.98 CP717K

SUPER DUTY .498 SHANK AIR HAMMER KITMost powerful CP air hammer for automotive,

truck and off road equipment.• Stroke: 2.69”; average air consumption: 1800

bpm• 4 piece .498 chisel set and a spring style

retainer all packed in a heavy duty carry case.

$899.95

94




AIR DRILLS, BURRS AND AIR LINE PRODUCTS

FP783

3/8” REVERSIBLE PISTOL DRILL• Heavy Duty Planetary Gears • Tease Trigger for Control• Trigger Mounted Reverse Lever

$100.51

DV130099

120 CFM AIR CONTROL FILTERING REGULATOR• HAR-602 - The Value Leader -

Removes moisture and dirt and regulates air pressure

• 120 CFM air line filter w/ 50 CFM regulator

$190.11

DV130042

TORNADO AIRLINE FILTER AND REGULATOR• “Tornado” action separator ring removes water by swirling incoming air • “Flex drain” allows fast removal of water collected in the bowl • Quick release bowl guard and spin-off filter

element provides quick, one-minute filter changes, Quick shut-off valve

• 100 CFM air line filter w/ 60 CFM regulator$278.28

FP784

1/2” REVERSIBLE PISTOL DRILL• 500 RPM• Tease Trigger for Control• Trigger Mounted Reverse Lever

$149.74

ARC4338

3/8” COMPOSITE DRILL• Composite body for extra durability• 400 RPM Free Speed

$127.18

ARC4450

1/2” COMPOSITE DRILL• Composite body for extra

durability• 1800 RPM Free Speed

$139.49

IR7807R

3/8” STANDARD DUTY AIR ANGLE REVERSIBLE DRILL• Durable Jacobs multi-craft chuck. Reversible, with convenient control.• Comfortable lever throttle.• Grease plug for easy preventative maintenance.

$141.54

IR7803RA

1/2 HEAVY DUTY REVERSIBLE AIR DRILL• No-load speed of 500 rpm. *• Auxiliary side handle.

$283.08

CP879

3/8” REVERSIBLE ANGLE AIR DRILL• 1700 free speed RPM; 3/8in.-24 spindle • Rear exhaust directs air away from workpiece • Reverse valve for simple directional changes • 4 CFM average air consumption

$147.98

MEMGD12-2

PAINT SPRAY GUN DISPOSABLE FILTERS

CARBIDE BUR SETS

Designed to remove the smallest contaminants to supply clean, dry, oil free air to your spray gun. • Improved air flow for HVLP as well as High Pressure applications. • Increased thread strength for resistance

to breakage.

$14.35

Item Desc. Style Cut Diameter Head Length SaleSRBT10 A Solid Carbide Tree Double 1/4” 5/8” 2.5” $21.18SRBT11 B Solid Carbide Cylinder Double 1/4” 1” 2.5” $20.78SRBT12 C Solid Carbide Cylinder Router Diamond 1/4” 1” 2.5” $27.60SRBT13 D Solid Carbide Cylinder Diamond 1/4” 3/4” 2” $20.12SRBT15 E Solid Carbide Cylinder Double 1/4” 1” 2” $29.30SRBT16 F Brazed Head Cylinder Double 3/8” 3/4” 2” $27.17SRBT17 G Brazed Head Cylinder Double 1/2” 1” 3” $31.83SRBT19 H Solid Carbide Ball Nose Cylinder Double 1/4” 5/8” 2.5” $22.37SRBT20 I Brazed Head Ball Nose Cylinder Double 3/8” 3/4” 2.5” $27.57SRBT21 J Brazed Head Ball Nose Cylinder Double 3/8” 3/4” 2.5” $35.86SRBT23 K Brazed Head Tree Radius Double 1/2” 1” 2.75” $34.08SRBT24 L Brazed Head Tree Radius Double 3/8” 3/4” 2.5” $30.89SRBT26 M Brazed Head Ball Nose Cone Double 3/8” 7/8” 2.75” $33.96SRBT27 N Brazed Head Ball Nose Cone Double 1/2” 1” 3” $36.09SRBT30 O Solid Carbide Pointed Double 5/16” 2” 3” $53.16SRBT36 P Brazed Head Oval Aluma 1/2” 7/8” 2.65” $44.64SRBT38 Q Brazed Head Cylinder Aluma 3/8” 3/4” 2.75” $36.09SRBT40 R Brazed Head Tree Radius Aluma 3/8” 3/4” 2.5” $33.96

SRBTE4

SRBT8

SRBT8 8 pc. Carbide Bur Set in Blow Molded Case $182.25

SRBT5 5 pc. Carbide Bur Set in Blow Molded Case. $108.88

SRBTE4 Carbide burs - 4 Piece Long $142.01

Aluma Cut Burs are generally used on softer materials such as lead, magnisium, brass, plastics and aluminum. They feature large flutes which prevents clogging. Double Cut Burs are used for cast iron, steel and other ferrous metals. They feature cross cut rows of teeth for fast removal of material.Diamond Cut Burs are used on cast iron and have an extremely aggressive cutting pattern for quickest removal.

A B C D E F

LKJIHG

M N O P Q R

DISPOSABLE DESICCANT AIR FILTERThe only disposable compressed airfilter for spray guns that includes aunique color change indicator tosignal time to change out the filter. • Absorbs oil, condensed moisture and contaminants as small as 5 microns. Attaches directly to the air inlet of the spray gun.

MEMGDD1008 $21.34

AO525C

3/8” REVERSIBLE AIR DRILL• Provides full power in forward and reverse • Equipped with a built-in muffler for noise

reduction • Planetary gear system for long life • Chuck Capacity: 3/8” Free Speed: 1,800rpm • Overall Length: 7-7/8” , 2-1/2lbs.,motor: 1/2hp

$74.09

95




PAINT AND BODY EQUIPMENT

PMW6000 5 x 7 Feet $3.88

PMW6002 6 x 8 Feet $4.76

PMW6004 8 x 10 Feet $7.43

PMW6006 10 x 12 Feet $10.72

PMW6009 10 x 20 Feet $17.92

PMW6011 12 x 16 Feet $16.92

PMW6015 16 x 20 Feet $29.09

PMW6017 16 x 32 Feet $43.88

PMW6020 18 x 24 Feet $38.44

PMW6022 20 x 30 Feet $50.70

Tarps - Reinforced corners, Rope sewn along edges for strength and Rust resistant grommets

AOASMS2

MASKING STATION• Holds 4 paper rolls 16”to 22” & 4 tape rolls

$100.37AO4577

MOBILE STEP MASKING MACHINE• Lightweight , easy to use and portable• Dispenses rolls up to 18” in width• Sharp, anodized blade for smooth cut t ing• Unit can be used as a s tep s tool

$61.21

AO4550

AIR OPERATED PAINT SHAKER• Lightweight , heavy duty construction• Fully adjustable locking rubber coated clamps offer increased grip while shaking• Paint can size (Min. & Max.): 1 pint - 1 gallon

round cans.• Shakes: 1110 cycles per minute• Air consumption: 1.37 CFM~1.5CFM• Recommended shake time: 2 minutes

$217.16

MM06484

• 1 in x 4.9 yds Black polyproplene reclosable fastener. Ideal for mounting or attaching weighty obects to surfaces. Acrylic adhesive performs well up to 200 degrees.

$135.73

Ideal For Mounting Or Attaching Weighty Objects To Surfaces.

Premium performance adhesive systems are a convenient way of joining two surfaces together for temporary time. Comprised of 2 woven strips of hook and loop material with Pressure Sensitive Rubber Adhesive

MM06480

HOOK AND LOOP ADHESIVE CONNECTING STRIPS• Each pack consists of 12 strips, 1”x 12”

$76.39

MM06481

HOOK AND LOOP BULK PACK DISPENSER• Attractively Packaged for Counter Display. Roll

Size is 1 x 4.9 Yds (14.7’). Sell it by the inch, foot or yard

$66.71

AO7300

SUPER STAND-UNIVERSAL ROTATING PARTS WORK STAND• Comes with 8 adjustable bars

to fit almost any panel securely. • Allows for single handed

rotation of panels 350 degrees in 16 degree increments.

$241.29TA85800

PORTABLE BODY SHOP WORK STAND 500 LBS CAPACITY• 500 lb capacity

$57.03

AO4535W

HURRI-CLEAN PUMP-LESS WATERBORNE SPRAY GUN PAINT WASHER• Designed for use with waterborne spray guns• Pump-less unit• 2.5 gallons (10 liter) cleaning fluid tank• Takes less than a minute to clean a complete

set of painting equipment inside & out• Has a 1 gun & 1 cup capacity• Used cleaning fluid easily disposed via drain valve• Unit equipped with auto stop timer• Equipped with safety valve

$924.84

MM06483

DUAL LOCK MINI-PACK FASTENING SYSTEM• 1”x 4.9 yds Black with rubber adhesive

that performs well up to 120 degrees continuously or 158 degrees intermittently. Closure is 5 times stronger than hook and loop.

$97.03DUAL LOCK HI TEMP MINI PACK FASTENING SYSTEM

Remove Harmful Particles and Moisture That Cause Tool Corrosion and Paint Damage

DV130026

3 STAGE DESICCANT AIR DRYER SYSTEM• First stage removes oil, water, and dirt down to

5 microns • Second stage removes particles down to .01

microns • Third stage uses low-dusting desiccant to trap

water vapor • Maintenance free first and second stages

feature automatic bowl drain $1,018.09

DV130500

DESICCANT AIR DRYER SYSTEM• Removes water vapor from the

compressed air down to a dew point of -40° F

• Uses the Quick change 10 lb. desiccant cartridge bag for fast and easy back to production time.

$478.05

DV130525

QC3 DESICCANT AIR DRIERHigh performance filtration with minimal pressure drop. • Three-stage filtering with 0.1 micron rating

produces clean, oil and humidity free air resulting in outstanding paint finishes

• Includes: Inlet shut off valve, Regulator and gauge, Humidity Indicator and Bowl Drain

$258.40

DV130512

AUTOMATIC COMPRESSOR DRAINAutomatically drains water from compressed air

systems• Includes electric timer, 1/4” Y-strainer valve with

filter screen and 6’ power cord$229.68

BT51000

TORNADO II™ PAINT SHAKERThree levels of motion thoroughly

blend gallon size and smaller paints, including aerosol containers, in minutes.

• The unit features a 115 volt motor and measures 11-1/2” deep x 15-1/2” high.

• Can be used on a table top without bolting down

$533.09

AO2618

120 CFM AIR CONTROL UNITFilter and regulator in one • Remove water, oil and contaminants

from compressed air, and provide constant air supply

• Drain valve designed to empty filters without dissembling the unit.

• Air Inlet/Outlet: ½ “NPT$118.71

DV130504

QUICK CHANGE DESICCANT CARTRIDGE FOR THE QC30• No mess disposable replacement

bag for many filter driers$101.76

96




PAINT SPRAY GUNS AND ACCESSORIES

Optimized performance in climates varying from hot and humid to clean and dry• Excellent for solvent-based

coatings • Waterborne compatible

when using a plastic or disposable cup system.

Includes:• Fluid tips 1.2, 1.3, 1.4

mm and TE10, TE20 air caps, digital gauge, and accessories

TN19229

4 PIECE ANODIZED SPRAY GUN SETTouch-up, base coat, clear coat, colors, to full job

spraying with professional stainless steel fluid passages.

• Blue Gun - 1.0 mm nozzle set for lighter materials and touch up work• Red Gun - 1.4 mm nozzle set for lighter materials• Green Gun - 1.7 mm

$169.90

TN19221

4 PIECE SPRAY GUN KIT INSTEEL CASE•Touch-up, base coat, clear coat, colors, to full

job spraying.•Professional stainless steel fluid passages.

1.0, 1.4, 1.7 spray guns and regulator. All packaged in a secure steel riveted case.

$142.45

TN19220

4 PIECE SPRAY GUNS 1.0,1.4,1.7 KIT• Touch-up, base coat, clear coat, colors, to full

job spraying,• Professional stainless steel fluid passages• 1.0, 1.4,1.7 spray guns and regulator

$140.21

NEW HTE-S high performance spray technology is compatible with all

waterborne and or solvent borne coatings• All wetted parts Stainless Steel with

responsive trigger action• Chrome plated body• Includes 600ML Plastic cup (cup #6039)

DV110264

GFG670 PLUS SPRAY GUN KIT

Air Guns HVLP Impact Spragy Guns

ProLite Basecoat/Clearcoat HVLP Spray Guns

• Powerful atomization - twice the energy available in HVLP guns. Powerful productivity - super fast fluid flow for high speed painting.

PLUS® Gravity Gun Includes:• 1.2 mm, 1.3 mm, and 1.4 mm fluid tips, 1-Liter

aluminum cup with push on lid, High output air adjusting valve with gauge, Spray lube, fluid filter, gun hook

$555.80

DV170156

GTI® MILLENNIUM HVLP GRAVITY FEEDThe Ultimate HVLP Base Coat/Clearcoat Gun,

Excellent value. Three guns in one.• 1.3 mm, 1.4 mm, and 1.5 mm fluid tips, 1-Liter

aluminum cup with push on lid, High output air adjusting valve with gauge, Spray lube, fluid filter, gun hook

• Features the GTi® Millennium HVLP GRAVITY FEED Air Cap #2000 for Base coats, clearcoats, primers, single stage and low VOC

$569.69

DV110264 DV170156

TN19000

HVLP GRAVITY FEEDSPRAY GUN• With 1.4mm Stainless Steel Tip., 5

- 43 psi Air Regulator, Brass Fluid & Air Nozzle, 600cc Plastic Paint Cup

$60.00

TN19018

HVLP SPRAY GUN 1.8 TIP• With 1.8mm Stainless Steel Tip., 5 - 43 psi Air

Regulator, Brass Fluid & Air Nozzle, 600cc Plastic Paint Cup

$60.00

Item # Tip Type Sale

IWA9232 1.8 Primer $168.75

IWA9230 1.3 Base/Clear $168.75

IWA9231 1.5 Sealers/STD $168.75Item # Cup Sale

DV703566 900CC $633.12

DV703567 None $580.24

Item # Tip Paint Sale

IWA9270 1.3 Clear, Base $422.83

IWA9271 1.5 Primer, Solid Clears $422.83

IWA9272 1.8 Primer, Sealer $422.83

IWA9273 2 Primer, Epoxies $422.83

IWA9274 1.4 Clear, Base $422.83

IWA9275 1.6 Primer, Solid Clears $422.83

Item # Tip Paint Sale

IWA5900 1.2 Base Clear $832.49



IWA5915 1.5 Base Clear Metalics $832.49

IWA5920 1.33 Dupont Special $832.49

Air Gunsa Center Post Gravity Feed HVLP Spray GunsHigh on quality, and low cost!• Features an ergonomic

lighter body with a softer trigger pull to reduce fatigue.

• Polished surface allows for easier cleanup

TN19223

Stainless steel paint needle and fluid nozzle set resists corrosion and wear from abrasive materials

• 1.4 mm Production Gun for spraying bases and clear coats. Locking Pressure Regulator with Gauge

• 1.7 mm Production Gun for spraying primers, surfaces and fillers

$171.89

4 PIECE SPRAY GUN AND SANDER KIT

EPA NESHAP 40 CFR, part 63 Subpart 6H Compliant for new regulations!

• Longer wider pattern, patented “LV” technology nozzle design combines a higher fluid delivery that facilitates a faster smoother application

• More material savings due to a higher transfer efficiency rate

• Check with your paint supplier for the prescribed tip size to spray their product

97




HIGH QUALITY PAINT GUNS

TA17280

SPRAY GUN CLEANING KIT• Spray Gun Cleaning Kit

$10.93

MI1018

1/4” MICRO FILTERPOLY BOWL AND GUARD• 1/4” NPT Air Filter

$56.77

DV802405

STARTINGLINE DETAIL GUN• Value priced Mini HVLP detail gun• 1.0mm fluid tip is suitable for a spraying

a variety of materials.• Includes cleaning brush and wrench• 30 PSI inlet pressure delivers 10 PSI at the air

cap; 8 CFM air consumption.

$123.99

DV802789

3 PIECE STARTINGLINE SPRAY GUN KITComplete Spraying System for Automotive Primers, Finish Coats and Touch Up Contains: HVLP Spray Gun (finish coats) 1.3 mm, HVLP Spray Gun (primers) 1.8 mm, Two 600 cc (20 oz.) cups, One 130 cc (4 oz.) plastic cup, Cleaning brush, wrench, and Air Adjusting Valve with Gauge Spray Gun Specifications

$294.79

2 GUN STARTINGLINE KIT PRIMER/PAINT GUNS• Full Size HVLP Sprayguns, 1.3mm, 1.5mm,

1.8mm Needle/Nozzle set-up for spraying Primer

• One Air Adjusting Valve, 2 - 20oz/600cc Aluminum cups for each HVLP Spraygun, Cleaning Brush and

DV802343 $206.56

Item # Style Tip Size Notes Price

SA169979 RP 1.2 Standard $843.15

SA169995 RP 1.3 Digital $843.15

SA170035 RP 1.3 Digital $1,007.50

SA170050 RP 1.4 Digital $1,007.50

SA170209 HVLP 1.4 Standard $843.15

SA170357 Digital WB Special HVLP $1,007.50

SA170365 Digital 1.3 HVLP $1,007.50

SA170373 Digital 1.3C Water/Clear $1,007.50

SA170399 Digital 1.4 HVLP $1,007.50

SA171520 RP 1.1 Standard $843.15

Item # Tips Cup Price

DV703488 1.2,1.3 None $507.58

DV703496 1.3, 1.4 None $507.58

Lighter, improved handling and higher precision• Reduced weight by 15% and a lower centre of gravity

makes this gun easier to handle.• Features: Improved control elements- the spray fan can

be precisely adapted to the shape of the object.• The new nozzle concept meets the requirements of

modern paint systems providing a uniform and perfectly shaped spray fan.

• QCC™– Quick Cup Connector. Includes 3 RPS disposable cups (one each of 0.3 l, 0.6 l and 0.9 l) instead of the reusable cup.

Sata Jet 4000B Series Base and Clear Coat Specialty Spray Guns

TEKNA COPPER GRAVITY WATERBOURNE PAINT SPRAY GUNS

Superior performance and productivity for elite refinish painters. Tekna offers optimal atomization of all coatings including base and clears; solvent and waterborne• Transfer efficiency equal to or better than

HVLP; superior metallic control, slicker clears

• Includes 7E7 Air Cap, Digital air adjusting valve (HAV-555), gun wrench, color ID Rings and DPC-43 DeKups Adapter.

DV130095

WHIRLWIND FILTERS• HAF507K2 Whirlwind™: longer life and less pressure drop. Patented two-stage filter Stage 1 - Swirl Chamber- Removes large water droplets Stage 2 - Filter Media - Removes smaller water droplets, oil droplets & dirt particles. 2 per package

$22.17

Meets NFPA Code 30 and OSHA Specifications

• Designed to Protect Contained Flammable Liquids for a Period of 10-Minutes

• Suitable for Storage of Up to 5-Gal Sized Containers of Flammable Liquids

• 3-Point, Flat Key Locking System w/ Button Latches

• Factory Drop Ship Free Freight to a commercial district address

FLAMMABLE LIQUID SAFETY STORAGE CABINETS

Ships By Truck

B

D

C

Item # Pics Desc. SaleHMYW00750300 A 30 Gal. $1,564.62HMYW00750450 B 45 Gal. $1,932.36

HMYW00750451 C45 Self Closing Hinges

$2,146.84

HMYW00750600 D 60 Gal. $2,313.68A

98




SPRAY GUNS AND AIR BRUSHES

IWA4200

ECLIPSE BOTTOM FEED HP-BCS AIRBRUSHUsed to spray premixed or heavier paints, it

is well suited for uses demanding precise control of spray when applying moderate-to-large amounts of paint to a variety of surfaces and to various-sized areas.

• Bottom-feed airbrush features a 0.5-mm needle and nozzle combination

• Sets the industry standard for high-performing, general-purpose, high-paint-flow airbrushes

$192.63

IWA4207

ECLIPSE GRAVITY FEED HP-CS AIR BRUSH• Commonly used to spray premixed or heavier

paints • Gravity-feed airbrush features a unique

0.35-mm needle and nozzle combination for fine-detail spraying, but with high-paint-flow capacity

• Generous 1/3 oz. sized cup

$214.44

Item # Series Style Tip Size Cap Spray Notes Price

IWA4860 W400LV Compliant 1.3 Silver Base/Clear Regulator $659.08

IWA4865 W400LV Compliant 1.4 Silver Base/Clear Regulator $732.31

IWA5550 LPH400LV HVLP 1.4 Silver Base/Clear $659.08

IWA5640 LPH400LV HVLP 1.3 Silver Base/Clear $659.08

IWA5660 LPH400LVX HVLP 1.3 Gold Base Metalic $659.08

IWA5670 LPH400LVX HVLP 1.4 Gold Base Metalic $659.08

IWA5725 LPH440 HVLP 1.6 Silver Primers Sealers $374.37

IWA5730 LPH441 HVLP 1.8 Silver Primers Sealers $390.12

IWA5800 LS400 HVLP 1.3 Gold Base Metalic/Pearl $832.40

IWA5805 LS400 HVLP 1.4 Gold Base Metalic/Pearl $832.40

IWA5810 LS400 HVLP 1.3 Silver Base/Clear Super Atomizing $832.40

IWA5815 LS400 HVLP 1.4 Silver Base/Clear Super Atomizing $832.40

IWA5850 LS400H Hybrid HVLP 1.3 Gold Base/Clear Metalic/Pearl $832.40

IWA5855 LS400H Hybrid HVLP 1.4 Gold Base/Clear Metalic/Pearl $832.40

IWA5865 LS400H Hybrid HVLP 1.3 Silver Base/Clear Super Atomizing $832.40

IWA5870 LS400H Hybrid HVLP 1.4 Silver Base/Clear Super Atomizing $832.40

Waterborne Professional Spray GunsHVLP and Compliant Paint Spray Guns. Generally used for automotive refinishing applications, IWATA Spray Equipment has since become a favorite with muralists and fine artists. All these products are especially suited for clear-coating and base-coating. Most guns feature Spray patterns up to 12” , Stainless Steel Paint Passage, Fixed double action triggar, Replaceable Teflon™ Needle Packing, Pre-Set Needle Adjustment, Air Pressure Adjustment, Fan Pattern Adjustment, Catridge-Style Air Valve Set, Round Pattern Air Cap and Fan Pattern Air Cap. (cups not included with these guns). “SUPERNOVA” premium guns combine superior atomization control with production speed and ergonomics. They are best suited for Pearls and Metalic base coats.

DV802609

DAGR AIR BRUSHDGR-501G-35 DAGR™Gravity Airbrush .35mm -Performance and versatility for theautomotive artist • Hairline detail to high paint-flow shading and

gradual fades. Smooth double action trigger. • Sprays automotive paints to water-based inks. Removable 1/3 oz gravity cup with optional 1/4 oz and 1/2 oz cups available or spray with no cup

$207.58

DV803286

AIR BRUSH COMPRESSOR

FLG SPRAY GUN HVLP VALUE KITS

• Quiet, oilless, piston compressor with automatic shut off for longer compressor life, w/ Regulator - 1/8 HP• Includes: Regulator, water trap filter and airbrush holder. .07 CFM, up to 30 PSI, 120V

$243.41

Item # Style Tip & Needle Sale

IWAN2000 Siphon 0.5 $102.98

IWAN4500 Gravity DA 0.35 $102.98

Siphon style is used in general-purpose, high-paint-flow spraying and wider spray patterns. Gravity style is used for finer detail spraying and medium-sized spray patterns.

NEO High-Performance Air Brushes

TN19551

DUAL ACTION GRAVITY FEED AIRBRUSH• Balanced, lightweight design with chrome plated finish• Dual action trigger for greater control - press

down for air; pull back for paint• For use with automotive or water based paints

$57.41

Item # Model Paints Tips Cup Sale

DV803558 670 Solvent based coats, topcoats, and light primiers

1.3, 1.5, 1.8 and 900cc

900 cc Alum $258.46

DV803559 671 Waterbourne base/top coats and light primers 1.3, 1.5, 1.8 20 oz

Acetal $258.46

DV803560 678 New Primers 1.8 and 2.2 900cc $227.32

Enhanced Atomization meets the needs of the newest coatings for Solventbased coats, topcoats, and light primiers• Multiple fluid tips included 1.3, 1.5, 1.8 and 900cc Alum cup• Air adjusting valve with gauge (select models). Soft uniform spray patterns• Precision machined aircaps & fluid nozzles provide a quality finish• HVLP high transfer efficiency. Anodized internal passages

AO2PG8S

PRESSURE POT PAINT GUN KIT• Pressure spray gun with 2 quart (1893cc)

pressure pot• Equipped with pressure gauge and fluid

pressure regulator for accurate settings• Operator can mix and paint 2 quarts (1893cc)

at a time• 6 foot twin set of hose permits easy movement

and operation of spray gun• Excellent for spraying large areas such as buses,

trucks and vans• Nozzle Size: 1.7mm• Operation Pressure: 5-20psi

$180.33

99




TOOL STORAGE AND CREEPERS

Item # Drawers Features Price

SU8035 2 Locking Slide top with surface rubber mats. Angle iron supports help hold up to 450 lbs. Black $383.67

SU8035R 2 Locking Slide top with surface rubber mats. Angle iron supports help hold up to 450 lbs. Red $383.67

SU8045 5 Flip top locking lid. 75% Pre-assembled with screwdriver/prybar holder, side work shelf; all keyed the same. Red $501.64

SU8045BK 5 Flip top locking lid. 75% Pre-assembled with screwdriver/prybar holder, side work shelf; all keyed the same. Black $502.36

SU8045BL 5 Flip top locking lid. 75% Pre-assembled with screwdriver/prybar holder, side work shelf; all keyed the same. Blue $502.36

SU8054 4 Locking top with gas shocks, and locking pry bar holder. 500lbs capacity. Red $572.49

SU8054BK 4 Locking top with gas shocks, and locking pry bar holder. 500lbs capacity. Black $572.49

SU8043 4 Sliding top, 98% work station assembled with underneath storage. 2” hole in the rear to allow power cords access. Built in screwdriver holder $502.56

SU8013A 1 Most Popular! Locking drawer and locking top are keyed the same. 350 lbs. capacity. Components available to custom build a complete work station. Red $281.34

SU8013ABK 1 Most Popular! Locking drawer and locking top are keyed the same. 350 lbs. capacity. Components available to custom build a complete work station. Black $281.34

SU8013ABL 1 Most Popular! Locking drawer and locking top are keyed the same. 350 lbs. capacity. Components available to custom build a complete work station. Blue $281.34

SU8050 2 Locking top with gas support shocks, 5” casters, 500 lbs capacity, drawer sizes 3-1/4” and 4-1/4” deep. Red $455.21

SU8050BK 2 Locking top with gas support shocks, 5” casters, 500 lbs capacity, drawer sizes 3-1/4” and 4-1/4” deep. Black $535.54

SU8032 2 Durable polyethylene shelves, anodized aluminum legs. Grey/Red $236.11

SU8033 3 Durable polyethylene shelves, anodized aluminum legs. Grey/Red $256.64

Sunex manufactures carts specific to requirements requested by the large name brands. Most carts feature ball bearing slides, EVA foam drawer liners, keyed alike locks, professiomal powder coated paint, 5” castors and are quality assured before leaving their warehouse locations.

PROFESSIONAL DUTY SERVICE CARTS

SU8045

SU8043

SU8045BK

SU8035

SU8013ABLSU8013ABKSU8013A

SU8050SU8050BK

SU8032

SU8033

SU8035R

SU8045BL

SU8054 SU8054BK

35.28”H x30”D x 16”W

39.5”H x 20”D x 33.25”W

34.5”L x 21.25”W x 39.5”H

30”L x 16” W x 41” H

29.5” x 16.75” x 2”

29.5” x 16.75” x 2”

27”L x 39.75”H x 18.25”W

29.25”L x39.4”H x 20.7”W

Functional and Comfortable for Day Use Indoors or Out. All creepers feature heavy duty casters for safe mobility.

Item # Pic Color Whls MFG Price

LS92032 A Red 6x4” Lisle $120.68

LS92102 A Red 6x2” Lisle $93.07

LS93032 A Yellow 6x4” Lisle $120.68

LS93102 A Yellow 6x2” Lisle $93.07

LS94032 A Blue 6x4” Lisle $120.68

LS94102 A Blue 6x2” Lisle $93.07

LS97102 A Black 6x2” Lisle $96.88

LS95002 B Red None Lisle $37.78

OMC-2701T C Rd/Bk 4x2” Omega $114.29

OMC-3110 D Rd/Bk 4x2” Omega $86.33

OM91400 E Black 6X3” Omega $108.70

OM91452 F Black 6X3” Omega $144.11

SU8505 I Red 6x2.5” Sunex $105.21

SU8507 J Rd/Bk 4x2.5” Sunex $51.65

SU8509 K Rd/Bk 5x2.5” Sunex $84.07

SU8511 L Red 6x3” Sunex $105.43

Item # Pic Style Wheel Misc Price

REL1-100 A Low 5” Extra Wide $131.87

REL1-210 B King Crawl 5” Adj Head $155.34

REL2-200 C Seat 3” Adj. Ht $136.33

REL2-210 D Round Seat 2.5” Adj. Ht $86.95

REL2-220 E Row Seat 2.5” Adj. Ht $124.18

REL2-230 F Monster Seat 5” Adj. Ht $163.98

REL2-700 G Low Seat 5” Adj. Ht $178.13

REL3-100 H TopSide Folder - 48” to 64” $312.33

REL3-300 I Stool - 15” x 10.25” $46.20

REL3-700 J Topside Pro - Over 64” $444.35

38”x17.5”

48”x18”

40”x26.75”x2”H

12.5”x(High 20.5” Low 15.5)

40”L

17”x14”x14”

40”x17x4”

39.9”x40”x26”

Adj. Height

15.3”x10.58”x13”

Creepers make your work environment safer and more ergomic. Whether, sitting or prone, these creepers help techs increase productivity by reducing fatigue.

Creeper Solutions

Ships By Truck

* Most Carts Ship By Truck

Ships By Truck

A

B

B

CC D

D

E

E

F

F

L

K

G H

JI

PNEUMATIC SHOP STOOL• Slip-resistant adjustable feet• Vinyl padded adjustable

backrest for ultimate comfort10-1/2” – 12” adjustable back28-1/2” – 33” adjustable height

SU8516 $82.57

Traxion Creepers with Super Duty Wheels

A

C

I J

Also Available in Black

100




TOOL STORAGE AND CREEPERS GLOVES AND SHOES

Chest Item # Width Depth Height Color Price

HMBK02056071 55 3/4” 21 3/4” 20 3/4” Black $1,432.02

HMBL02056071 55 3/4” 21 3/4” 20 3/4” Blue $1,432.02

HMRD02056071 55 3/4” 21 3/4” 20 3/4” Red $1,432.02

Chest Item # Width Depth Height Color Price

HMBK02008410 41” 17 3/4” 21 1/2” Black $766.93

HMBL02008410 41” 17 3/4” 21 1/2” Blue $766.93

HMRD02008410 41” 17 3/4” 21 1/2” Red $766.93

Top Chest Drawers Width Depth Height

4 29 1/4” 20” 2”

2 18 1/2” 20” 2”

1 18 1/2” 20” 4”

Top Chest Drawers Width Depth Height

3 12 1/4” 15 3/4” 2 5/8”

1 12 1/4” 15 3/4” 5 3/4”

3 22 1/2” 15 3/4” 2 5/8”

1 22 1/2” 15 3/4” 5 3/4”Cabinet Drawers Width Depth Height

1 37 3/4” 15 7/8” 5”

3 22 1/4” 15 7/8” 3”

2 22 1/4” 15 7/8” 6”

3 12 1/4” 15 3/4” 3”

2 11 7/8” 15 7/8” 6”

Cabinet Drawers Width Depth Height

1 29 1/4” 19 3/4” 6 1/4”

1 19 7/8” 19 3/4” 6 1/4”

6 29 1/4” 19 3/4” 3 1/4”

Cabinet Item # Width Depth Height Color Price

HMBK04056082 56 1/4” 22 7/8” 45 3/4” Black $2,550.77

HMBL04056082 56 1/4” 22 7/8” 45 3/4” Blue $2,550.77

HMRD04056082 56 1/4” 22 7/8” 45 3/4” Red $2,550.77


HMBK04011410 42” 18 1/8” 38 3/4” Black $1,228.66

HMBL04011410 42” 18 1/8” 38 3/4” Blue $1,228.66

HMRD04011410 42” 18 1/8” 38 3/4” Red $1,228.66


HMBK08041071 17” 18” 33 1/8” Black $604.40

HMBL08041071 17” 18” 33 1/8” Blue $604.40

HMRD08041071 17” 18” 33 1/8” Red $604.40

Drawers Width Depth Height

5 Drawers 12 3/8” 15” 2 1/2”

2 Drawers 12 3/8” 15” 5 3/8”

Inside Width Depth Height

2 Drawers 12” 14 1/4” 2 1/2”

2 Shelves 17 3/4” 15 1/2” 5/8”


HMBK08041021 17” 18” 53.75” Black $498.08

HMBL08041021 17” 18” 53.75” Blue $498.08

HMRD08041021 17” 18” 53.75” Red $498.08

• HMC Hight Security Tubular Locking System• FUll Length Aluminum Drawer Pulls• Drawer Liners and Top Mat Included• Replaceable Ball-Bearing Drawer Slides• 6” x 2” Roller Bearing Casters w/550lb Capacity per Caster

• HMC Hight Security Tubular Locking System• 3.2 mil Epoxy-Polyester Power Coat Paint Finish• Full Length Solid Aluminium Drawer Handles• Draw Liners and Mats Included• Full-Extension Gas Struts• 390mm Replaceable Ball-Bearing Slides

• HMC Hight Security Tubular Locking System• Full Length Solid Aluminium Drawer Handles• Draw Liners and Mats Included• 390mm Replaceable Ball-Bearing Slides

• Creeper Rollers swivel easily with full ball bearings• Powder coated to resist rusting • Overall dimensions listed

56” H2PRO Series Combo

17” H2PRO Series 7 Drawer Side Cabinet

18” Full-Height Side Locker

41” Pro Series Combos

Ships By Truck

Ships By Truck

Padded Creepers

Item # Descp. Mics. Sale

WS47006 Comfort Padded17” x 40” A V-Rail $116.24

WS47007 Comfort Padded Adjustable 17” x 40” B V-Rail $140.92

WS47008 Either End Flip Over17” x 44” C Adjustable $220.62

WS47009 Convertible Creeper or Seat 17” x 40” D 6 Wheel $188.00

WS47010 Extra-Wide20” x 40” E V-Rail $164.26

WS47011 Extra-Wide Adjustable 20” x 40” F 3 Pos Adj. $197.30

WS47012 No-Matic Big Wheel 24-1/2” x 40” G 6” Rollers $255.54

WS47013 No-Matic Big Wheel 24-1/2” x 40” H Adjustable $278.13

WS47014 Flame Resistant 17” x 40” I V-Rail $165.67

WS47015 Over-The-Engine 43-1/4” to 57-3/4” J 300lb. Cap $369.91

WS48001 Mechanic’s Seat 15-1/2” x 19” K Tool Tray $74.42

WS48002 Mechanic’s Seat 15-1/2” x 19” L Swing Tray $98.11

WS48003 Shop Seat15” x 15” x 25” M 3” Wheels $144.90

WS48004 Black Hydraulic Seat 15” x 15” x 25” N Adj. 17-22” $183.36

WS48005 Red Hydraulic Seat 15” x 15” x 25” O Adj. 17-22” $205.74

WS48006 12” Button Seat Hydraulic 16” x 16” x 16” P Adj. 16” -20” $73.21

A B

C D

F

J

L

N

P

K

M

O

H

I

G

E

101




GLOVES AND SHOES

160Powder

Free

100Powdered,

Latex

100Powdered,

Nitrile

160Powder

Free

50Powdered,

Latex


SS6591 Small 5 $8.50

SS6592 Med. 5 $10.08

SS6593 Large 5 $10.08

SS6594 XL 5 $10.08

Item # Size Color Price

RG213-08 Small Hi-Viz $41.74

RG213-09 Medium Hi-Viz $41.74

RG213-10 Large Hi-Viz $41.74

RG213-11 XL Hi-Viz $41.74

RG213-12 XXL Hi-Viz $41.74

RG577-08 Small Black $41.74

RG577-09 Medium Black $41.74

RG577-10 Large Black $41.74

RG577-11 XL Black $41.74

RG577-12 XXL Black $41.74

Item # Size Price

MEXMG4X-75-008 Small $30.15

MEXMG4X-75-009 Medium $30.15

MEXMG4X-75-010 Large $30.15

MEXMG4X-75-011 X-Large $30.15

MEXMG4X-75-012 XX-Large $30.15


RG123-08 Small $37.36

RG123-09 Medium $37.36

RG123-10 Large $37.36

RG123-11 XL $37.36

RG123-12 XXL $37.36


SS6602 Med. 14 $20.00

SS6603 Large 14 $20.00

SS6604 XL 14 $20.00

SS6605 XX-L 14 $20.00


SS6607 Med. 5 $14.82

SS6608 Large 5 $14.82

SS6609 XL 5 $14.82

SS6610 XX-L 5 $15.29


SS66516 Small 6 $18.11

SS66517 Med. 6 $18.11

SS66518 Large 6 $18.11

SS66519 XL 6 $18.11

RAVEN BLACK, TEXTURED GLOVES WITH BEADED CUFF

NITRON ONE LIGHTLY POWDERED

SUPREMO SE, CHLORINATED, POLYMER-COATED NITRILE GLOVES

NITRILE DERMA-LITE BLUE, TEXTURED W/BEADED CUFF

ENGINEERED PERFORMANCE

THICKSTER TEXTURED BLUE GOVES VALUE-TOUCH, SMOOTH GLOVES WITH BEADED CUFF


SS650-1001 Small 8 $18.27

SS650-1002 Med. 8 $18.27

SS650-1003 Large 8 $18.27

SS650-1004 XL 8 $18.27

MXMK296S S $17.80MXMK296M M $17.80MXMK296L L $17.80MXMK296XL XL $17.80MXMK296XXL XXL $17.80

MXXC-310-XS XS $27.81MXXC-310-S S $27.81MXXC-310-M M $27.81MXXC-310-L L $27.81MXXC-310-XL XL $27.81

MXMF300S S $19.88MXMF300M M $19.88MXMF300L L $19.88MXMF300XL XL $19.88

MXDFK608S S $25.42MXDFK608M M $25.42MXDFK608L L $25.42MXDFK608XL XL $25.42MXDFK608XXL XXL $25.42

MXBD-1000-PF XS $17.42MXBD-1001-PF S $17.42MXBD-1002-PF M $17.42MXBD-1003-PF L $17.42MXBD-1004-PF XL $17.42

MXSU690M M $19.83MXSU690L L $19.83MXSU690XL XL $19.83

MXSG375M M $23.67MXSG375L L $23.67MXSG375XL XL $23.67

MXNO123M M $18.37MXNO123L L $18.37MXNO123XL XL $18.37

DYNA GRIP TEXTURED LATEX GLOVES

100Powdered,

Nitrile

50Powder-Free,

Nitrile

100Powder-Free,

Latex

100Powder-Free,

Nitrile

100Powder-Free,

Latex

100Powder-Free,

Latex

50Powder-Free,

Latex

BLACK DRAGON FULLY TEXTURED GLOVE 9.5”

XCEED GLOVES

DURA FLOCK GREEN W/MOISTURE ABSORBING LINING 9.5” SLEEVE

DIAMOND GRIP TEXTURED FINGERS LATEX GLOVES, 9.5”

MIDKNIGHT BLACK NITRILE,CHLORINATED GLOVES, 9.5”

SAFEGRIP TEXTURED FINGERS, CHLORINATED 12” BLUE HD LATEX GLOVES

250Powder-Free,

Nitrile

MXMO150M M $14.34MXMO150L L $14.34MXMO150XL XL $14.34

100Powdered,

Latex

MICRON ONE LIGHTLY POWDERED 9.5” SLEEVE

Superior Puncture &Abrasion Resistance

Beanie with Any 123Series Cold

Weather Gloves

FREE

R21 Gloves are Designed for Extreme Work Conditions • Full coverage TPR protection on the top of the hand to reduce

pinching and bruising to the fingers and Metatarsal• Heavy Lycra panels for greater comfort and fit

R21 TACTICAL IMPACT GLOVES

COLD WEATHER IMPACT GLOVES

Item # Size Sale

MEXMFL-05-500 Med-Large $26.09

MEXMFL-05-540 Large X-L $26.09

Fingerless Gloves with 2-way, stretch Spandex padded back. Lycra finger panels, concealedinterior seam stitch preventssnagging, streamlined elastic cuff with hook and loop closureproviding protection & counteracting fatigue while keeping fingertips free for precise, sensitive work.

4X Automotive Repair Work GlovesMaterial 4X® palm and fingertips offers superior wear, higher abrasion and greater puncture resistance when compared to leather. Completely machine washable.• Offers the same logistical feel and fit that has been the Mechanix Wear standard

Fingerless Gloves From Mechanix Wear

102




GLOVES AND PROTECTIVE WEAR

Item # Style Size Color Sale

MEXH30-05-008 H30 Impact Pro S Grey/Black $31.16

MEXH30-05-009 H30 Impact Pro M Grey/Black $31.16

MEXH30-05-010 H30 Impact Pro L Grey/Black $31.16

MEXH30-05-011 H30 Impact Pro XL Grey/Black $31.16

MEXH30-05-012 H30 Impact Pro XXL Grey/Black $31.16

Item # Style Size Color SaleMEXH15-05-008 H15 Utility Pro S Black/Grey $17.08MEXH15-05-009 H15 Utility Pro M Black/Grey $17.08MEXH15-05-010 H15 Utility Pro L Black/Grey $17.08

MEXH15-05-011 H15 Utility Pro XL Black/Grey $17.08

MEXH15-05-012 H15 Utility Pro XXL Black/Grey $17.08


MEXMGP-08-008 MGP Original Plus S Black Tone $28.11

MEXMGP-08-009 MGP Original Plus M Black Tone $28.11

MEXMGP-08-010 MGP Original Plus L Black Tone $28.11

MEXMGP-08-011 MGP Original Plus XL Black Tone $28.11

MEXMGP-08-012 MGP Original Plus XXL Black Tone $28.11


MEXMP2-05-008 MP2 Impact S Black Tone $41.16

MEXMP2-05-009 MP2 Impact M Black Tone $41.16

MEXMP2-05-010 MP2 Impact L Black Tone $41.16

MEXMP2-05-011 MP2 Impact XL Black Tone $41.16

MEXMP2-05-012 MP2 Impact XXL Black Tone $41.16

Item # Style Size Color SaleMEXMFF-02-008 MFF Fast Fit S Red $16.04MEXMFF-02-009 MFF Fast Fit M Red $16.04MEXMFF-02-010 MFF Fast Fit L Red $16.04MEXMFF-02-011 MFF Fast Fit XL Red $16.04MEXMFF-02-012 MFF Fast Fit XXL Red $16.04MEXMFF-03-008 MFF Fast Fit S Blue $16.04MEXMFF-03-009 MFF Fast Fit M Blue $16.04MEXMFF-03-010 MFF Fast Fit L Blue $16.04MEXMFF-03-011 MFF Fast Fit XL Blue $16.04MEXMFF-03-012 MFF Fast Fit XXL Blue $16.04MEXMFF-05-008 MFF Fast Fit S Black $16.04MEXMFF-05-009 MFF Fast Fit M Black $16.04MEXMFF-05-010 MFF Fast Fit L Black $16.04MEXMFF-05-011 MFF Fast Fit XL Black $16.04MEXMFF-05-012 MFF Fast Fit XXL Black $16.04

Item # Sizes SaleSS6812 Medim $9.07SS6813 Large $9.07SS6814 X-Large $9.07


MEXMG-02-009 MG Original M Red $25.12MEXMG-02-010 MG Original L Red $25.12MEXMG-02-011 MG Original XL Red $25.12MEXMG-02-012 MG Original XXL Red $25.12MEXMG-03-008 MG Original S Blue $25.12MEXMG-03-009 MG Original M Blue $25.12MEXMG-03-010 MG Original L Blue $25.12MEXMG-03-011 MG Original XL Blue $25.12MEXMG-03-012 MG Original XXL Blue $25.12MEXMG-05-008 MG Original S Black $25.12MEXMG-05-009 MG Original M Black $25.12MEXMG-05-010 MG Original L Black $25.12MEXMG-05-011 MG Original XL Black $25.12MEXMG-05-012 MG Original XXL Black $25.12

High Workboot (Specify Size)

FD68231 Tan $44.47

FD68232 Black $38.46

Low Cut Boot

FD421 Tan $35.90

FD422 Black $38.46

Steel Tip High

FD681S Tab $43.59

FD682S Black $38.46

Fuda Boots are Made of QualityComponents and Leather UppersDesigned for Comfort and Durability

MFF Fast Fits feature an elastic cuff and ultra-snug form-fitting two-way stretch Spandex construction. Leather palms and reinforced synthetic leather thumb and finger tips have gripping contact points.

MG Original features dual-layered fingertips and thumb for reduced wear and increased protection with great fingertip grip and sensitivety still evident. Knuckle reinforcement, stretch lycra bands for added form fitting comfort, strength and protection.

MP2 Impact features double-layer synthetic leather palms. Knuckle panel features high-density accordion design to blunt pointed impact. Wrist, top panel and fingers are covered with molded TPR shock-absorbing pads. Finger and thumb grippers made from non-slip, rubberized tire-tread Clarino®

H30 Impact Pro’s High performance fit and protection feature anatomic TPR-molded rib panels to protect the back of your hand, knuckles and fingertips. The palm features enhanced grip Dura-Fit synthetic leather for better flexibility and grip.

3 Piece 0.35mm PVC/Polyester Construction Ventilated Cape Back• Storm Front Snap with Zipper• Jacket with Detachable Drawstring Hood & Corduroy Collar for Comfort• Two Flapped Pockets• Bib Overall with Adjustable Suspenders• Adjustable Cuff & Ankle Snaps for Better Fit

H15 Utility Glove has two-way form fitting stretch Spandex top to optimizes fit, comfort and ventilation. The palms feature Dura-Fit synthetic leather with concealed interior seam stitching to prevent snagging.

MGP Original Plus Glove has a traction surface with a raised pattern to maximize the thumb and finger grip.Two-way, form-fitting Spandex back and stretch insert panels between the fingers for comfortM-Pact II

H30 Impact Pro

Light Weight PVC Rain Suits

MGP Original Plus

MP2 Impact

MFF Fast Fit

H15 Utility Pro

MG Original

103




SAFETY, EYE AND EAR PROTECTION


UXS3501X Espresso Lens $13.33

UXS3510X Sct-vermilion Lens $13.33

UXS3511X Sct-blue Lens $13.33

UXS3512X Gray Lens $13.33

UXS3513X Gray 50% Lens $13.33

UXS3520X Clear Lens $12.08

UXS3521X Espresso Lens $13.33

UXS3530X Sct-vermilion Lens $13.33

UXS3531X Sct-blue Lens $13.33

UXS3532X Gray Lens $13.33

UXS3533X Gray Lens 50% Tint $13.33

Exceptional comfort, protection and style Dual 9-base wrap-around lens provides uncompromised peripheral vision and side protection

DB2 Glasses feature High-impact polycarbonate lenses, with wrap-around design that hugs the face. • Scratch-resistant coating and anti-fog coating on lenses

Contemporary design comes with detachable temple mounts or with the included headband for all-day comfort. Soft, flexible nasal pads and face cushioning for excellent fit.

X2 EYEPROTECTION

Item # Col. Sale

UXS4410 Clear Lens $9.64

UXS4411 Gray Lens $10.82

UXS4412 Reflect 50 lens $12.62

UXS4413 Silver Mirror Lens $12.62

UVEX IGNITE SLEEK, SPORTY WITH SAFETY IN MIND

TA14540

HEARING PROTECTOR• Protects hearing

against loud shop sounds

$20.00

AO7660

AUTOMATIC SOUND DEADENING EAR MUFFS

Seismic Sealed Frame Safety Glasses

• On/Off switch with volume control• Built-in microphone amplifies low level sound• Eliminates noise over 85db• Comfortable ear cushions and headband• Powered by 2 AA batteries

$38.70

Ite # Lens Type Price

Precision Pro Protective Eyewear

UXSX0200X Clear Anti-Fog $12.13

UXSX0202 Amber Anti-Scratch $12.41

UXSX0209 SCT Low IR Anti-Scratch $12.97

UXSX0210X SCT Vermillion Anti-Fog $13.26

UXSX0211X SCT Blue Anti-Fog $13.26

UXSX0213X 50% Grey Anti-Fog $13.26

UXSX0214X Blue Mist Anti-Fog $13.26

Item # Lens Price

DB2 Safety Glasses

SS540-0600 Clear $7.87

SS540-0601 Shaded $7.87

SS540-0603 Mirror $7.87

SS540-0605 Yellow $7.87

Item # Lens Price

UXS0601X Expresso $20.92

UXS0620X Clear $22.10

UXS0622X Amber $22.10

UXS0624X Mirror $23.79

UXS1890X

FURY WRAP AROUNG GOGGLES• Sleek, frameless design with wrap around 9-base

unilens Ideal for dust and small particulates• Soft, flame resistant, replaceable face foam and

headband, Not for chemical splashes$19.18

UXS8500

BIONIC FULL PROTECTIVE FACE SHIELDEnhanced protection from airborne debris• Lightweight and balanced, ergonomic design

for extended use• Comfortably worn with most goggles and

respirators

$34.55Designed To Maximize Vision And Reduce Distortion For Jobs Where Seeing Every Detail In Perfect Clarity Is Critical.

SS5330 Clear $1.90

SS5331 Shaded $1.90

SS5332 Yellow $1.90

SS5333 Blue $1.90

Inspectors Glasses

SS5420-15 1.5 $19.88

SS5420-20 2 $19.88

SS5420-25 2.5 $19.88

SS5420-30 3 $19.88

SS5420-50 None $17.78

LED Safety Classes

LED Inspectors With Magnifying Lens for Easier Reading. High Impact Anti-Fog Polcarbonate Lenses are Scratch Resistant offer 99.9% UV Protection. LR44 batteries included

NSX Turbo Safety GlassesHigh-Impact Polycarbonate Lens 99..9% UV Protection Single lens design Scratch Resistant Lens Lightweight Wrap-Around Lens

SS5135

EYEWASH SAFETY STATION

• Stations comes with water preservative.

• One-hand operation gravity feed with a 15 minute flow time

• Unit measures: 25 1/2 x 20 x 9 1/2”

• No plumbing required, mounting bracket included.

$276.21SS6108-RC

DIGITAL AM/FM RADIO EARMUFFS PROTECTORS• Comfortable and NRR25 rated• Adjustable Headband• High Quality Audio, Rich Christensen endorsed• Digital AM/FM Radio with MP3 / iPOD •

Compatible Line-In Jack

$67.58

Red/Silver Ignite Frames feature close-to-the-face protection and superior coverage. Soft, saddle pad nosepiece reduces slippage and provides a personalized, comfortable fit. Meets ANSl Z87+ (High Impact) and CSA Z94.3 standards

104




CLEANING

40 GALLON PARTS WASHER

IN31400

• 22 Gallon Working Capacity.• Self Closing Fusible Linked Fire Cover.• Removable Work Shelf And Parts Basket.• For Added Safety GFCI Plug Included.• Ul Listed

$442.20

IN31200A

20 GALLON PARTS WASHER• 12 gallon capacity• Self latching fusible linked fire cover

$251.91

Item # Item Gallon Motor Accessories Wet/Dry Features Price

SP2021000 A 1 1 hp 4’ hose, gulper nozzle, and crevice tool Both Easy Carry $70.55

SP3190110 B Upright 4.3Amp 30’ cord Dry 2 Position floor sweep $242.73

SP5850300 C 4 2 hp 10’ hose, round brush, crevice tool, and gulper nozzle Both Easy Carry $83.21

SP5873510 D 10 6.5 hp 12’ hose, Wands, 14” Floor Nozzle, Crevice, & Claw Nozzle Both Blower Mode $211.63

SP3942100 E 5 4.5 hp25’ hose, Wands, round brush, crevice tool gulper nozzle, 12” nozzle squeegee and brush inserts

Both Great for detail shop or home $138.22

SP9621210 F 12 6.5 hp12’ hose, wands, 12” floor nozzle with brush, squeegee inserts, crevice tool, claw utility nozzle and adapter

Both Easy water pick up $176.49

SP9621310 G 12 6.5 hp12’ hose, wands, 12” floor nozzle with brush, squeegee inserts, crevice tool, claw utility nozzle, and adapter

Both Stainless steel tank $267.06

SP9626010 H 24 6.5 12’ Hose, Wands, 14” Floor Nozzle, Blow Molded Crevice, Claw and Nozzle Both Industrial quality $296.27

SP9626110 I 32 6.5 12’ Hose, Wands, 14” Floor Nozzle, Blow Molded Crevice, and Claw Nozzle Both Blower Mode $343.57

Most Vacs include on board mounts or tool tray holders to store included accessories.One set of filters, foam sleeves and/or bags usually come with most vacuums .

Vacuums that Fit all Types of Cleaning Needs

SP1560000

SHOP-VAC FLOORMASTER® MOP BUCKET• Large capacity bucket,

efficient ringer system, non-marking easy-roll wheels,

and rear handle$120.76

IN31350A

3.5 GALLON TABLE TOP PARTS WASHER• 3-1/2 gallon working capacity• 45 GPH pump output• Safety GFCI plug at 115V/ 0.5A• UL Listed on complete unit• 18-1/2” x 13-1/2” x 9” overall dimensions

$137.10

IN31400

IN31350A

IN31200A

A B CD

F

IH

G

TA94600

AIR POWER CLEANING GUNUse for cleaning machinery, engines, parts, floors

and thousands of other applications. • Use with detergents for best results. • Adjusting control regulates amount of cleaning

agent to be mixed with compressed air. • Clear siphon tubing is 7 feet long with filter on

end. • Gun wand is 17? long and can clean hard to

reach places. • Air consumption is 5 CFM @ 90 PSI.

Recommended operating pressure is 70-90 PSI.

$32.53

SUSX1000

AIR POWER VACUUM GUN• Two-way function - vacuum and suction, with

Light weight composite pistol grip handle• Extension tube, Dust bag, Rotatable brush,

Flexible extension hose, Crevice Tool, Orifice Tool• Easy to handle, Weight 1.47 lbs. Length 5.7”

$68.70

UNQS9000

QUICK SPIFF AIR VACUUM• Connect an air line to create the Venturi Vacuum.• Pick up dirt, dust, glass, nuts, bolts...• One piece pistol grip handle• Three Attachments, 16” Flex Hose, 3” Dust Brush,

9” Crevice Tool. Heavy duty dust bag.• Rear deflector extends dust bag life

$68.09

Item # Pic Description Sale

SP9035000 A ULTRAWEB Cartridge Filter Fits over 5 Gallon models $26.51

SP9058500 B Replacement Foam Sleeve Filter $6.04

SP9061500 C 1-1/4” Round Vac Brush $9.51SP9061600 D 1-1/4” Crevice Tool $6.70SP9061900 E 1-1/4” Utility Nozzle $6.86SP9066100 F Bag Fits 5-8 Gallon $12.40

SP9066200 F Bag Fits 10-14 Gallon Vacuums $14.32

SP9066300 F Bag Fits 16-22 Gallon Vacuums $15.95

SP9069800 G Turbine Rotory Brush Turbine Nozzle $29.12

Shop Vac Parts and Accessories

A BC

D

E

EF

G

105




CLEANING HEADLIGHT AIMING, GENERATORS, CLEANING SUPPLIES AND GEAR

• 1800 PSI, 1.6 GPM (gallons per minute)• 130AMP efficient air cooled induction motor• Pistol style grip with trigger spray wand. Adjustable spray (fine to

intense)• Convenient 35 ft. cord with GFCI• Includes automatic soap

dispenser and brass hose connector

BR4116C

CAR WASH BRUSH• Use with solid or hollow handle (not included)• Blue Fine bristles with a rubber guarded edge

for use on delicate surfaces$11.72

HTVRK-01

BURN-OUT INTERIOR REPAIR KITGenerate new profits for your business!• Repair cigarette and other small burns on

upholstery, sun visors, door panels, headliners and more with this easy to use system. Each kit contains 27 OE automotive interior velour jars

• Sufficient velour to repair over 1,000 burns.

$107.56

HTHRK-01

10 CAR HEADLAMP REPAIR KIT• Restore headlight lenses back to new• Chemicals and pads used with the proper

rotory tool takes the yellow off the lens

$38.18

STLSP-WE175

1800 PSI ELECTRIC WASHER

$262.37

STLSP-WG300

3000 PSI PORTABLE GAS WASHER• 3000PSI (MAX) 2.5GPM. 6.5HP OHV engine• Maintenance-free pump features a thermal relief valve• 5 quick-connect tips (0º, 15º, 25º, 40º, soap)• 30 ft. high pressure hose with quick-connect

coupling. Stainless steel wand

$822.57

TX467A

HIGH PRESSURE AIR/WATER CLEANING WANDBlasts away dirt and debris at a 90 degree angle. • Wand reaches 24” between radiator and

condensor, under mowing decks, etc. to clean away dirt and debris.

• Special tips deliver air or water at a 90 degree angle.

$91.49

JDPFM-500

PAPER FLOOR MATS• Paper – 16” x 22” 500 per pack

$50.99

Ships By Truck

Ships By Truck

AR60650

SEE BRIGHTER HEADLIGHT RESTORATION KIT• No sanding or polishing needed• Applies in under 5 minutes• Built-in UV protection. Clean, Apply, DONE!

$19.93

MA30210

PLASTIC SHOP BAGS• 27 Piece. Per case

$35.16

Item # HP Peak/Rated Watt Outlets Run @ 1/2 Load Price

STLSP-GG100 A 2 1000/850/7amp 1/120 AC, 1/12V 8.5 hrs $299.43

STLSP-GG120 B 2.8 1200/1000/8.3a 2/120 AC 1/12V 7 $459.63

STLSP-GG200 C 3 2000/1400/11.6a 2/120 AC 1/12V 9 $542.42

STLSP-GG300 D 6.5 3250/2800/20.8 2/120 AC 1/12V 8 $635.01

STLSP-GG350 E 6.5 3500/3000/25 2/120, 1/120/240, 1/12V 8.5 $796.99

STLGG-750E D 13 7500 2/120, 1/120TL, 1/120/240TL, 1/12V 9 $1,420.90

Portable GasGenerators!

Low Noise

EB

SHIPS BY TRUCK

F

A C D

STLSP-WG240N

2400 PSI PRESSURE WASHERPowered by 163cc OHV 4 Stroke Engine• 2.1 GPM (Gallons Per Minute)• Maintenance-Free Heavy-Duty Pump• 4 Quick-Connect Tips (0º, 25º, 40º, soap)• 25 ft. High Pressure Hose. Thermal Relief Valve• Stainless Steel Wand

$522.62

SXSCA1

HEADLAMP AIMER W/ISO COLORWith the SCA 1 ISOColor Headlamp Alignment System perfect headlampalignment is no longer a guessinggame. Symtech’s revolutionary ISOColor alignment makes perfect headlamp alignment quickand easy.

$1,022.90

SXHBA5

MULTI STATE APPROVED HEADLIGHT AIMER• Photo-sensor positioning with light intensity meter that measures lamp intensity in kilo candles. Certified for safety inspections and approved for use in Maryland and Virginia.• Aligns all types of headlamps in one

inexpensive, easy-to-use unit.

$2,050.55

106




CLEANING SUPPLIES

Item # Length Price

MTHFZG5100YW 100’ $88.90

MTHFZG550YW 50’ $56.95

MTHFZG575YW 75’ $73.30

Premium Hybrid Polymer Water Hose• Superior all-weather flexibility (35º to 150º F)• Abrasion resistant, Crush proof nickel plated male & female fittings. • Withstands pressures of 150 PSI and burst 450 PSI• Rugged bend restrictor, Lightweight, Coils Easily, Kink resistant - ribbed inner core design BUPWA

PARTS CLENING BRUSH

$27.10

Flexzilla Premium Garden Hose

TA17370

36 PIECE BUCKET OF BRUSHES• Contains 12 each of the most popular brushes – brass, nylon and stainless steel bristles.• For use with cleaning solvents, thinners and chemicals.• Each brush is 3 x 7 rows with a hang-up hole

in the polypropylene handle. Overall length of each brush is 7”.

$20.70

HTSP050

BEND AND SPRAY WATER HOSE NOZZLE• Heavy duty rubber and brass. Leakproof. Overall length approx. 8-1/2”

$20.97

Flow Thru Straight Handle

MM06016

PERFECT-IT DETAILING CLOTHS AND CLEANING CLOTHS• Removes oily or filmy residue

including waxes, polishes, glazes and fingerprints, and is ideal for paint, chrome, glass, dashboards, and more.

• Super-soft micro-texture will not scratch or streak delicate surfaces.

• 12” x 14” 6 Cloths per pack$33.85

HTSP010

6” INDUSTRIAL WATER NOZZLE INSULATED

$14.82

HTSP040

STANDARD WATER NOZZLE• Heavy duty, spray hose nozzle. Leakproof.

Overall length approx. 6”$8.59

6” Heavy Duty Water Spray Nozzles

No LeakConnections

HT313445

CALIFORNIA WATER BLADE SQUEEGEE• Removes water quickly, cleanly and efficiently• Molds itself to almost any contour

$26.28

MM05975

PAINT BUSTER HAND CLEANER• Cream type hand

cleaner offering superior performance in the removal most automotive chemicals found in the shop along with lacquer, enamel and urethane paints, primers, putties, and plastic fillers.

$19.51

TA17050

FINGER NAIL AND HAND CLEANING GRIME BRUSH• Sold in 24 piece

display box$51.49

TA17390

LACQUER RESISTANT DELUXE PARTS BRUSH• Polyester bristles taper trimmed and joined to

solid handle by a plated steel ferrule• Overall length 11”, Bristle length 2 ”, Brush

diameter 1 ”$12.94

DV192218

• Easy to use wipes help clean up in a hurry.

• Rough texture quickly scrubs tools and surfaces clean. Towlettes are heavy duty - Easily removes dirt, oil, printers ink and tar.

• 72 Count per resealable tub, each towel is10.5” x 12”$25.78

SCRUBS IN A BUCKET HAND CLEANER

BR49830W-4

WOODEN HANDLE FLOOR SQUEEGEE• Study blade and foam sponge for faster clean up

$34.49

BUPW6P

PARTS CLEANING BRUSH

$31.98Flow Thru Ergo Handle

TA14700LIGHTWEIGHT KNEE PADS

$23.14

TA14720

KNEELING PAD• 23” X 11”

$16.49

MM08888

GLASS CLEANER• Non-streaking aerosol cleaner that

is also effective for use on plastic, chrome, and metal.

• 19 oz Aerosol Spray

$5.09

JDESCB-2

ECONOMY SEAT COVERS• Top pocket slips securely over the

back of bucket seats - leak-proof• Snap out either side and it fits on

the back of bench style seats• 200 high quality wraps per dispenser box

$65.27

JDPB-12

500 ROLL OF PLASTIC PARTS BAGS• Size 12” X 22”• Heavy duty bags used for

parts storage$60.35

CG170AIR

FRESH AIR OZONE PURIFIER BOXOzone is the most powerful sterilant commercially available to kill bacteria, viruses, odors, & mold spores. • Eliminates mold, mildew, & bacteria from

mobile A/C systems & cabin interiors.• AC & DC power, & programmable timer.• Perfect for automobiles, RVs, boats, or other

spaces with lingering odors or bacteria.

$317.95

107




Air Fittings And CouplersM Style

MI711S 1/4” NPT Nipple and Coupler Set (MI727 & MI715) $7.64

MI715S 1/4” X 1/4” Female NPT Air Coupler $6.30

MI716S 1/4” X 1/4” Male NPT Air Coupler $6.30

MI727S 1/4” X 1/4” Male NPT M Air Nipple $2.77

MI728S 1/4” X 1/4” Female NPT Air Nipple $2.93

A Style


MI776 1/4” X 1/4” Male NPT Coupler $9.28

MI777S 1/4” X 1/4” Male Nipple $3.03

MI778S 1/4” X 1/4” Female Nipple $3.03

T Style

MI783S 1/4” X 1/4” Male Nipple $2.93


MI785S 1/4” X 1/4” Female Coupler $7.08

MI786S 1/4” X 1/4” Male Coupler $7.08

L Style

MI790S 1/4” X 1/4” Female Coupler $11.83

MI791S 1/4” X 1/4” Male Nipple $4.38


P Style




MI1807S 3/8” X 3/8” Male NPT Air Nipple $5.07




G Style

MI1813 1/2” X 3/8” Female NPT Air Coupler $16.57

MI1814 1/2” X 3/8” Male NPT Air Coupler* $17.73





MI1819 1/2” X 3/8” Male NPT Air Nipple $3.81

MI1820 1/2” X 3/8” Female NPT Air Nipple $4.07






H Style


MI1834 1/4” NPT M Body Air $13.42







Push Button Style Couplers and Standard Air Nipples

PVARC061201 A Style 1/4” FNPT Yellow Coupler $27.21

PVARC061251 A Style 1/4” MNPT Yellow Coupler $25.82

PVARP066201 A Style Nipple 1/4” FNPT $1.89

PVARP066251 A Style Nipple 1/4” MNPT $1.99

PVASI061201 A Style 1/4” FNPT Safety Coupler $33.71

PVASI061251 A Style 1/4” MNPT Safety Coupler $33.63

PVIRC061201 M Style 1/4” FNPT Silver Coupler $22.92

PVIRC061251 M Style 1/4” MNPT Silver Coupler $25.38

PVIRP066201 M Style Nipple 1/4” FNPT $2.06

PVIRP066251 M Style Nipple 1/4” MNPT $2.06

PVISI061201 M Style 1/4” FNPT Safety Coupler $30.37

PVISI061251 M Style 1/4” MNPT Safety Coupler $29.49

PVURC061201 T Style 1/4” FNPT Red Coupler $24.24

PVURC061251 T Style 1/4” MNPT Red Coupler $26.02

PVURC081202 T Style 3/8” FNPT Red Coupler $45.98

PVURC081252 T Style 3/8” MNPT Red Coupler $44.55

PVURP066201 T Style Nipple 1/4” FNPT $1.89

PVURP066251 T Style Nipple 1/4” MNPT $2.06

PVURP086201 T Style Nipple 1/4” FNPT - 3/8 Body $2.06

PVURP086202 T Style Nipple 3/8” FNPT - 3/8 Body $3.95

PVURP086251 T Style Nipple 1/4” MNPT - 3/8 Body $3.17

PVURP086252 T Style Nipple 3/8” MNPT - 3/8 Body $2.93

PVUSI061201 T Style 1/4” FNPT Safety Coupler $30.37

PVUSI061251 T Style 1/4” MNPT Safety Coupler $29.49

PVUSI081202 T Style 3/8” FNPT Safety Coupler $48.68

PVUSI081252 T Style 3/8” MNPT Safety Coupler $50.44

M Style

A Style

L StyleT Style

P Style

G Style

H Style

TMU216

1/4” NPT UNIVERSAL ANTI BLOW BACK SAFETY COUPLER• Works with all popular 1/4” plugs, including

Lincoln long plugs$25.71

MIS99705

M STYLE PUSH BUTTON COUPLER 1/4” FEMALE

High Quaility Rubber Air Hose

M Style Push Button Coupler 1/4” Female$16.24

MIS99773

A STYLE PUSH BUTTON COUPLER 1/4” FEMALEA Style Push Button Coupler 1/4” Female

$16.40

1/4” NPT Safety style couplers designed especially to prevent accidental disconnects. Reduces potential damage to property or personal injury. Double click to engage properly: First time locks coupler and plug; Second time engages the air pressure

• Weather, oil, and solvent resistant outer coating with solid brass end fittings. • Hoses Feature spiral synthetic yarn reinforcement. 3/8” hoses have 1/4” NPT fittings, and 1/2” hoses have 3/8” NPT fittings.

Push Button Couplers & Standard Air Nipples

MIS99773 MIS99705


GA12185 25’ x 3/8” Red $35.90

GA12187 25’ x 3/8” Black $35.90

GA12192 25’ x 1/2” Red $64.96

GA12674 50’ x 3/8” Red $56.41

GA12676 50’ x 3/8” Black $56.41

GA12709 50’ x 1/2” Red $107.69

GA12758 100’ x 3/8” Red $111.11

GA12760 100’ x 3/8” Black $111.11

All couplers are push button style for ease of operation. Safety couplers are primarily used at the source and use an added protective feature to assure accidental disengagement does not occur.

108




AIR HOSE AND ACCESSORIES

Heavy Duty AirHose Reel With 300

PSI Air Hose


MTHFZ1225YW3 Flexzilla 1/2” x 25’ yellow air hose with 3/8” mnpt $45.34


MTHFZ1225YW4 Flexilla Air Hose ½ X 25FT Hose ½ MPT $55.12

MTHFZ1250YW4 Flexilla Air Hose ½ X 50FT Hose ½ MPT $88.51

MTHFZ3802YW2B Flexzilla whip hose 3/8”x 2’ with 1/4” mpt ball swivel end $23.03

MTHFZ3804YW2B Flexzilla 3/8” x 4’ ball swivel whip hose $26.24

MTHFZ3806YW2B Flexzilla whip hose 3/8”x 6’ 1/4” mpt ball swivel end $29.43


MTHFZ3825YW2 Flexzilla 3/8” x 25’ yellow air hose with 1/4” mnpt end $30.86

MTHFZ3850YW2 Flexzilla 3/8” x 50’ yellow air hose with 1/4” mnpt end $49.41

MTL8011FZ 3/8” x 50’ Flexzilla Hose Aluminum Die Cast Flexzilla air hose reel; Can be mounted on wall, bench, tank, or overhead.

$484.49

MTL8250FZ 3/8” x 50’ Economy Zilla Enclosed Plastic Air Reel with Auto-Retract and Auto Latch Mechanism.

$149.54

MTL8305 3/8” x 50’ HD PVC Retracta Air Hose Reel with Smart Rewind

$238.30


$250.91

MTL8306FZ 3/8”x75’ Flexzilla Levelwind Retractable Hose Reel $307.55


$264.80

MTL8335 1/2” x 50” Air or Water Retracting Hose Reel with Latching mode switch

$258.50

MTL8335FZ Flexilla Air Hose 1/2 x 50’ retractable hose reel $307.55

MTL8611FZ3/8’ x 50’ Workforce Retractable Flexzilla Air hose reel with Dual axle support for HD use on trucks or moving equipment.

$285.50

MTL8711FZ3/8” x 50 Performance Dual Arm Flexzilla Open Air Hose Reel - Dual supported axle withstands the vibration of mobile installations.

$440.78

MTL8903FZ3/8” x 25’ Stainless Steel Flexzilla air hose reel. Dual Axle Support withstands weather & the constant vibration of mobile installations.

$774.36

KINK-FREE Flexzilla Legacy Air Hose Products

MTL8651FZ

ZILLA REEL AIR HOSE REELDesigned for portability for use anywhere on the job site. 3/8” x 50 ft. portable air reel, manual layering guide w/ Flexzilla® air hose, 1/4” MNPT ends• Hose Layering Guide, Carrying Handle, Support

$164.31

LN83753 3/8” x 50’ Air Hose Reel $188.72

LN83754 1/2” x 50’ Air Hose Reel $205.13

Features auto-rewind and spring-powered automatic recoil with 300PSI rubber hose.

AO3682ME

3/8” X 50’ AIR HOSE REEL KIT• Automatic rewind with solid rubber stopper• Multi-position mounting arm allows for floor, wall,

or ceiling mounting$156.73

Item # Length Sale

MTHZP38100YW2 100 $107.58

MTHZP3825YW2 25 $37.98

MTHZP3835YW2 35 $47.47

MTHZP3850YW2 50 $60.13

Item # Sizes Sale

LN85515 Fits 1/4” ID $14.80

LN85516 Fits 3/8” ID $14.66

LN85517 Fits 1/2” ID $15.32

Flexzilla features durable, lightweight air hose without memory. Extreme temperature performance with ranges of 150F -40F 300 psi working pressure and engineered of a hybrid polymer that combines the best qualities of both PVC and rubber.

MTL8011FZ

MTL8250FZ

MTL8305MTL8306 MTL8310

MTL8611FZ MTL8711FZMTL8903FZ

Flexilla Air Hoses WithRe-Usable Ends. 3/8” ID With 1/4” Npt Male EndsFlexilla Engineered All Weather hybrid polymer air hose featuring reusable compression types ends. These ends easily come off if hose gets damaged and can be refitted back onto the existing hose. Fittings also available separate.

MTRP900375

FLEXILLA PRO 3/8” REUSABLE 1/4”NPT REPAIR ASSEMBLY• Use on any Flexilla hose for a

complete repair$5.78

MTL8306FZ

MTHFZ38250YW

250’ FLEXZILLA 3/8” HOSE - BULK SPOOLMake your own custom sizes!• Lightweight and easy to

handle • Cut to desired length• Use MTRP900375 hose ends

to complete the job

$0.75

Easily connects arround hoses on autorewind reels to stop complete retraction into the reel.

Air Hose Ball Stop for Reels

LS50350

SIDE WINDER® AIR HOSE REELCoil and Uncoil Your Air HoseNeatly and Quickly to Prevent Damage.• 10” diameter reel to prevent tight coils in your

air hose. $88.25


109



AIR HOSE AND ACCESSORIES AIR BLOW GUNS

The Air Comb™ Filter Cleaner thoroughly cleans air filters, condensers and radiators from the inside out.Focuses high-pressure and high-volume output shop air at a 90-degree multi-port to access the hardest-to-reach areas.Great for tube and cylindrical type air filters as well as radiators and AC condensers.Clean Air Filters with Ease!

AF201D


VU72-020-1050 4” Fixed Bent $21.70

VU72-020-1150 13” Fixed Straight $35.30

VU72-020-1160 13” Fixed Bent $35.30

VU72-020-1250 20” Fixed Straight $39.10

VU72-020-1260 20” Fixed Bent $39.10

VU72-020-8061 4” w/½” Rubber Tip $28.24

VU72-020-8062 4” with Booster $35.80

Item # Size Sale

IP8050 12” $33.49

IP8051 24” $39.08

IP8052 36” $50.27

IP8053 48” $55.86RUBBER TIPPED AIR BLOW GUN• Rubber Tipped Blow Gun

$12.07

MI153S

LEvER BLOW GUN WITH RUBBER TIP• Rubber tip is necessary where a metal tip

could damage delicate finishes• 1/4” NPT air inlet

$15.24

MI174S

BLO-GUN WITH RUBBER TIP AND FLOW CONTROL• Plastic body adjustable air flow regulator • 4” extension, Rubber tip won’t mar delicate

surfaces• Maximum working pressure: 110 psi, SCFM:

13 @ 90 psi, 1/4” NPT inlet$17.40

MI175S

BLOW GUN WITH SAFETY TIP OSHA COMPLIANT• Safety type metal tip allows air to escape if

dead ended. • Maximum working pressure: 110 PSI, SCFM 13

@ 90 PSI• 1/4” NPT brass air inlet, Plastic body

$16.90

Vacula Blow Guns feature an ergonomic design for comfortable handling. Compsite body assemblies provide life long durability.

HTAG718

BEND AND SPRAY AIR NOZZLE• Bend and Spray Air Hose Nozzle Heavy duty

rubber and brass. Approx. 4” long.$13.08

AEA680CS

TYPHOON AIR BLOW GUN PISTOL TYPE WITH TRIGGER• Variable trigger for

controlled blow-off.• Max Flow - 34 CFM @ 125

PSI; 2.1 Lbs. of thrust.$24.52

Item # Style Length Tip Color Price

Specialty Blow Guns

MTAG210-X Lever 6.5” Oozi Mass Air Flow Silver $31.34

MTAG218-X Lever n/a Venturi Booster Silver $10.51

MTAG7B Lever w/hook n/a Rubber Green $15.83

MTAG7D Lever w/hook n/a Rubber Red $16.33

MTAG9C-X Lever w/hook n/a Self Releving Blue $13.59

Specialty Air Comb™ Blow Guns

TN22958

MINI OIL LESS 1.6HP AIR COMPRESSOR• Great for use with .2mm to 1.0mm air brushes• Auto start and stop feature for consistent air flow• Includes adjustable air regulator for better air

control and easy to read gauge$136.25

VU11-210-0450

MULTI FLOW AIR AND FLUID GUNEffectively cleans surfaces with air or water with unparalleled blowing force. •Adjustable flow control, jet nozzle and in-flow

control •Non-slip grip

$54.92

TA99210

BLOW GUN & TIRE INFLATOR COMBINATION

RUBBER TIP BLOW GUNS

• Specially designed combination safety nozzle for tire inflation and general purpose air blowing• High impact, plastic handle with hang up hooks• To use as a tire inflator, a minimum of 90 PSI is required

$14.28

Specially designed angled nozzle accesses hard to reach places. Lever action, Lightweight and Rubber Nozzle prevents surface damage • 90 - 120 PSI operating range. 1/4” NPT Female brass air inlet

TA994004” Long Reach Angled Nozzle Blow Gun

$9.82


$12.47


$13.96

MI173S

BRASS TIP BLOW GUN• Brass tip, small lightweight,

suitable for tight confined work areas

• Max. WP: 150 PSI, 13 SCFM @ 90 PSI

$8.78

110




COMPRESSORS, AIR IMPACTS, RATCHETS AND SCALERS

Most HD Tools Feature Decibel levels between 70 and 90 dBA. Sunex HD Tools offer extended longevity to techs and tool livess with lower vibration and sound. Each is backed by a two year limited warranty through factory direct expedited service.

IR125

NEEDLE SCALER• For surface preparation work involving the

cleaning or removal of paint, rust, dirt, or weld slag, the IR125 is a durable, dependable, economical solution. 19 needles.

• Each needle 1/8” (3.2mm).• 4,600 blows per minute at free speed.

$245.97

FP1051

7” STRAIGHT NEEDLE SCALER

$201.03

• Removes Almost Any Surface Material, Rust & Corrosion• Needles Adapt to Uneven Surfaces• Gets Into Restricted Access Areas

Item # Rated HP

Gallon Tank Volt Max PSI WKG PSI@90 Price

STLSP-CE043 A 0.33 3 120 100 0.7 $142.27

STLSP-CE356M B 3.5 6 120 100 4.2 $286.29

STLSP-CE415M C 3.5 15 120 115 4.2 $354.70

STLSP-CE528M D 2.5 28 120 115 5.2 $559.27

STLSP-CE358TM E 3.5 8 120 115 4.2 $356.40

STLSP-CE355TM F 3.5 5 120 115 4.2 $256.79

Item # Pic Drive Max Tq Ft/Lb. Working Body Wt Price

CP7729 A 3/8” 415 50-300 Comp 2.78 $295.13

CP7739 B 1/2” 450 50-305 Comp 2.78 $304.19

CP7759Q C 1/2” 1150/780 75-460 Carbon 3.74 $368.31

CP7759Q-2 D 1/2” 1150/780 75-460 Carbon 3.97 $359.95

CP734H E 1/2” 425 25-310 Steel 5.2 $240.88

CP7733 F 1/2” 550 25-400 Steel 5.6 $205.54

CP7733-2 G 1/2” 550 25-400 Steel 5.9 $208.00

CP7620 H 1/2” 425 25-310 Steel 5.13 $165.25

CP7748 I 1/2” 922 75-580 Steel 4.4 $258.96

CP7748-2 J 1/2” 922 75-580 Steel 4.9 $267.19

CP772H K 3/4” 1000 150-700 Steel 10.5 $596.87

CP7763 L 3/4” 1200 100-950 Steel/Comp 11.5 $581.86

CP894 M 1” 1700 300-1200 Steel 25 $1,374.19

B

B

CF

E

D

D

A

Item # DR Torq Tool Price

SUSX3825 1/4” 30 Ratchet $134.62

SUSX3820 1/4” 30 Stub Ratchet $124.62

SUSX3830 3/8” 50 Ratchet $134.62

SUSX3835 3/8” 70 Impacting Ratchet $238.71

SUSX4335 3/8” 300 Wrench $221.15

SUSX4345 1/2” 750/1100 Wrench $230.77

SUSX4345-2 1/2” 750/1100 2” Anvil Wrench $240.38

SUSX4348 1/2” 1300 Wrench $312.96

SUSX4355 3/4” 1400 Wrench $506.79

Item # Desc. Type Needles Price

CP7115 Straight Straight 12 $217.87

CP7125 Pistol Pistol 19 & 29 $217.87

SUSX3825

SUSX3830

SUSX3835

SUSX4355 SUSX4345

SUSX4335

SUSX4345-2

SUSX4348

FP1050A

PISTOL GRIP NEEDLE SCALER• Removes almost any surface material, rust and corrosion• Needles adapt to uneven surfaces• Gets into restricted access areas

$201.03

Ships By Truck

Portable Air Compressors

QUALITY AIR TOOLS BY CHICAGO PNEUMATIC

A CE

J

K ML

F G H I

Used for De-Slagging• Pistol style comes with two sets of needles

CP Needle Scalers

FREE With CP7759Q

FREE Flip Socket

Set with CP7748 CP7733


111



AIR COMPRESSORS, TANKS AND AIR TOOLS

Air Ratchets

GB2515

1/4” Extended Length 18 1/4”. Head Width 1.25” Free speed is 200 RPM, working torque 15 ft/lbs.

$195.18

GB38453/8” Extended Length 20”. Head Width 1.5” Free speed is 160 RPM, Working torque 45 ft/lbs.

$211.25

Item # Pic Dr. Max Tq Price

ARC800R A 1/4” 45 ft/lb $110.77

ARC801R B 3/8” 45 ft/lb $127.18

ARC802R C 3/8”L 90 ft/lb $131.28

OMW1010A

10 GALLON AIR TANK• 3’ hose with chuck

$69.78

OMW1005

5 GALLON AIR TANK• 5 Gallon

$47.89

B

D

Ingersol Rand Heavy Duty Ratchets

Chicago Pneumatic Air Ratchet Wrenches

Item # Model Power hp Voltage Tank CFM/175 Notes Price

IR45465408 2475N7.5-V 7.5 230/1/60 80V 24 Incl. Starter $3,255.23

IR45465812 2545E10-V 10 230/3/60 120H 35 Incl. Starter (Factory Ship) $6,370.77

IR46821344 2475F14G 14 Gas Kohler 30 25 Elect & Pull Start $3,380.87

FP733W

1/4” FLAT HEAD WOBBLE RATCHET• 25 ft/lbs torque and 350 RPM run down speed• Wobble drive increases access to tight confined

and awkward area, Anti spread head design with protective cover

$90.26

FP724A

1/4” MINI RATCHET• 1/4” Mini Ratchet - 250 RPM 30 ft. lb. • Torque Sealed Head Design Increases• 250 RPM Best for Tight Access Work

*IR Compressors are shipped free freight if no assistance is needed, and must be made to a commercial addressRural, Inside, Lift gate, call in advance, or assisted deliveries will incur additional charges

$84.10

Ingersoll Rand air compressors have been providing unparalleled performance in the most challenging applications. They continue to be the world’s bestselling brand of compressors. Keep in Mind the purchase of the correct IR compressor startup kit which extends the pump warranty to 2 years. Ships By Truck

A

Extended Air Ratchets. Extra Long for Transmis-sion and Engine Work

Item # Pic. Drive Tq. Ft/lb Notes Price

IR105-L2 A 1/4” 25 8.4” $170.68

IR105-D2 A 1/4” 30 7.36” $141.54

IR105-D3 A 3/8” 30 7.36” $149.86

IR107XPA B 3/8” 54 11.9” $133.21

IR1077XPA B 1/2” 54 11.9” $162.35

IR109XPA C 3/8” 70 13” $206.48

IR1099XPA C 1/2” 70 13” $233.12

IR1105MAX-D2 D 1/4” 30 9” $203.46

IR1105MAX-D3 D 3/8” 30 9” $207.88

IR1207MAX-D3 E 3/8” 65 12.1” $221.15

IR1207MAX-D4 E 1/2” 65 12.1” $230.00

Item # Pic Drive Max Tq Length Misc Price

CP7828H A 1/2” 60 10.75” Quiet, High Speed $203.02

CP7830HQ B 1/2” 90 12” Quiet Ultra Torque $298.42

CP825 C 1/4” 15 6.5” Compact $189.10

CP825T D 3/8” 15 6.5 Compact $192.38

CP886 E 3/8” 50 10.25 Compact High Torque $103.60

CP886H F 1/2” 50 10.25” Compact Mid Torque $110.17

CP9426 G 1/4” 27 5.1” Mini High Torque $171.83

CP9427 H 3/8” 27 5.1 Mini High Torque $172.65

C

E

FP730A

3/8” HD AIR RATCHET• Unique Design Variable Speed Throttle • 65 ft-lb Max. Torque• 200 RPM Run-down Speed• New “Softouch” Handle Coating

$103.59

VP19707

3/8” AIR RATCHET• Forward/reverse lever conveniently located for quick direction changes• Front exhaust, compact head design • Max torque: 45ft/lbs.

$45.23

A

B

C

AO1111

1/4” DRIvE ULTRA STUBBY AIR RATCHET• Overall length 5 1/2” • Free Speed 240rpm, Max. Torque 16ft./lbs.

$66.79

AO1119

3/8” STUBBY WOBBLE AIR RATCHET• Wobble drive provides added flexibility to

access hard to reach areas • Overall length 5 1/2” (140mm)

$77.47

Silent Power Air Ratchets

H

E

F

G

DA B C

112




IMPACT WRENCHES

B

A

Item # Pic Max Tq Ft/Lb. Working Anvil Wt Price

CP7780 A 1700 260-1400 Std. 15.00 $851.13

CP7780-6 B 1700 260-1400 6” 17.00 $851.13

Easy to manuver forward and reverse lever with adjustable side handle and soft touch grip. • Integrated protective cover on the twin hammer clutch housing makes this tool durable. • 1700 ft.lbs of maximum torque in reverse• 4 positions power setting in both directions and on both sides of the tool• Socket retainer ring combined with hole retainer• Double stage trigger, inside for safe operation in tight areas

• 180 ft-lb Maximum torque• Ergonomically designed grip and trigger provide ultimate operating comfort• Refined hammer design eliminates excessive vibration and lateral movement• Patented cooling/lubrication systems eliminates over heating and loss of grease

Mighty Seven (M7) Air Tools are High Powered, Ergonomically Designed and Feature Lower In Use Sound Levels then Most Other Brands Available. Most Tools Include a One or Two Year Warranty.

A Full Array of Tools for Automotive Truck and Fleet Tire Service or Industrial Applications• Tools feature the Twin Hammer Motor for extra power and tool longevity

Patented tuned exhaust muffler technology, in all the tools, allows discharged air to pass without developing back pressure• Tools Feature an ergonomically engineered handle design to relieve stress.

1” Drive HD Impact Wrenches

King Tony’s M7 Series Of Air Impact Wrenches

Air Impact Wrenches

AIRCAT - All the Power, Half the Noise!

SUSX4325K

1/4” MINI IMPACT WRENCH KIT• Rocking Dog Clutch for great power and durability • Composite housing for durability with light weight

$170.35

Item # Pic Dr. Max Tq Misc LBS Price

ARC1150-K A 1/2” 1295 Twin Hammer 5.25 $296.70

ARC1200K B 1/2” 1200 Twin Clutch 4.5 $296.70

ARC1300TH C 3/8” 400 Twin Hammer 3.5 $252.75

ARC1355XL D 3/8” 500 Twin Clutch 2.9 $263.74

ARC1375XL E 1/2” 700 Mini 3 $274.73

ARC1600-TH F 3/4” 1400 Twin Hammer 16 $493.10

ARC1680 G 3/4” 1600 Twin Hammer 12.6 $451.68

ARC1820 H 1” 1600 Twin Hammer 15.36 $575.00

ARC1900 I 1” 1900 Twin Hammer 22.2 $690.38

Item # Pic Dr. Max Torq LBS Misc Price

FP739 A 3/8” 300 3.2 Super Duty $228.85

FP747 B 3/8” 320 2.8 Magnesium Body $209.62

FP743A C 1/2” 600 4.5 Economy Power $166.15

FP744A D 1/2” 800 5 6 Position Setting $204.92

FP746A E 1/2” 725 5.75 Heavy Duty $174.36

FP748AL F 1/2” 800 6 2” Anvil $236.54

FP749 G 3/4” 1100 8.6 — $340.38

FP777A H 3/4” 1100 9 6 Position Setting $451.92

FP794AL I 1:00 1400 32 6” Anvil $416.29

B DA C E

F G

H I

B D

A

C E

FG

H

I

IR2350XP

1/2” COMPOSITE AIR IMPACTOOLGreat quality tool at an incredible value.• 6-vane motor and twin hammer impact mechanism deliver 690 ft-lbs. of reverse torque• Improved control and ergonomics with a

feather-touch trigger, a wide range of power regulator settings in forward and a patented one-hand forward / reverse control

• Composite housing and reinforced aluminum hammer case, weighs just 4.1 lb

$280.66

Item # Style Torque Length Sale

KGNC-3610Q 3/8” Mini Quiet 350 4.55” $208.79KGNC-4610Q 1/2” Mini Quiet 500 4.55” $208.79KGNC-4236Q 1/2” Mini Quiet 1000 6.7” $400.75KGNC-6236Q 3/4” Quiet 1200 6.7” $405.77KGNC-6210Q 3/4” Quiet 1200 6.7” $374.96KGNC-6218 3/4” HD 1500 12.54” $903.85

Item # Drive Sale

FP727 3/8” $252.75

FP727H 1/2” $252.75

Impacting Close Quarters Torque Angle Ratchets Available February 2013

SUSX4360-6

INCH DRIvE IMPACT WRENCH

1” Lightweight Super Duty Impact w/6” ext. anvil• Only 15.9 ft. lbs. 18.38” long. and 1600 ft. lbs.

max torque• Three forward and three reverse settings • Side Exhaust

$839.76


113



IMPACT WRENCHES AND RATCHETS

20 volt Standard Duty Cordless Impact Wrenches

IR2015MAX

3/8” HAMMER-HEAD IMPACT TOOL3/8” Hammer-Head Impact Tool

$366.71

IR2025MAX

1/2” HAMMER-HEAD IMPACT TOOL1/2” Hammer-Head Impact Tool

$374.76

• 180 ft-lbs of MAX torque and 7,000 RPM • A feather-touch trigger with a two-position

forward power regulator • 13.1” long with a head height of under 2”

and reactionless torque which allows you to safely use this powerful tool in

tight spaces.

IR2101XP

1/4” MINI AIR IMPACTOOL™ KIT WITH SOCKETSPowerful Mini Impact delivers 45 ft-lb of torque (forward) where you need it most• Easily accessible forward/reverse switch • Free Speed 11,000 rpm, 1250 Blows Per

Minute. Overall Length 6-1/4”$176.92

IR2101XP-QC

1/4” QUICK CHANGE MINI IMPACTOOL™• Easily accessible forward/reverse switch • Quick change feature allows for simple and convenient attachment exchange • Free Speed 11,000 rpm, 1250 Blows Per

Minute. Overall Length 6-3/4”$194.62

IR2102XP

3/8” MINI AIR IMPACTOOL™Powerful Mini Impact delivers 45 ft-lb oftorque (forward) where you need it most• Easily accessible forward/reverse switch • Free Speed 11,000 rpm, 1250 Blows Per Minute • Overall Length 6-1/4”

$185.77

Titanium Air Impact Wrenches

Item # Pic Drive Max Rev Tq Ft/Lb. Style Wt Price

IR216B A 3/8” 200 Steel 2.89 $283.08

IR231C B 1/2” 600 Steel 5.8 $198.12

IR231HA B 1/2”t 590 Steel 5.8 $213.18

IR231HA-2 B 1/2” 590 Steel 6.1 $245.51

IR2130 D 1/2” 550 Comp. 4.2 $249.77

IR2130-2 D 1/2” 550 Comp. 4.2 $258.10

IR244A E 1/2” 500 Steel 6.3 $340.52

IR244A-2 E 1/2” 500 Steel 6.3 $344.69

IR236 F 1/2” 450 Steel 5.3 $159.23

IR259 G 3/4” 1050 Steel 8.8 $464.83

IR261 H 3/4” 1200 Steel 8.8 $585.97

IR261-3 I 3/4” 1200 Steel 11.8 $700.20

IR261-6 I 3/4” 1200 Steel 14.8 $731.84

IR2161XP J 3/4” 1250 Steel/Comp 11.8 $994.79

IR2161XP-6 J 3/4” 1250 Steel/Comp 13.1 $1,044.65

IR2145QIMAX K 3/4” 1350 Comp. 7.4 $722.97

IR2145QIMAX-3 L 3/4” 1350 Comp. 7.8 $701.50

IR2145QIMAX-6 L 3/4” 1350 Comp. 8.1 $803.39

IR2155QIMAX K 1” 1350 Comp. 7.4 $759.97

IR285B M 1” 1475 Steel 24.6 $836.74

IR285B-6 N 1 1450 Steel 29 $673.65

IR2190TI O 1” 1650 Steel/Comp 15.5 $982.73

IR2190TI-6 P 1 1600 Composite 19.5 $966.62

IR271 Q 1” 1200 Steel 8.8 $775.13

IR295A R 1” 1475 Steel 22 $832.34

B B D

A

E

J K

K

M

N

Q

P

O

R

L

F

G H I

Item # Drive Style Ft/lb Sale

IR2115QTIMAX 3 8” Quiet 300 $365.50

IR2115TIMAX 3/8” Std 300 $345.00

IR2125QTIMAX 1/2” QuietMini 300 $395.48

IR2135QTI-2MAX 1/2” Quiet 2” 780 $440.43

IR2135QTIMAX 1/2” Quiet 780 $433.77

IR2135TI-2MAX 1/2” 2” Anvil 780 $378.41

IR2135TIMAX 1/2” Std 780 $413.03

Maximize Your Impact! TiMax’s are the lightest tools in their class, with many of them weighting near or under 4LBS!. Tools Feature:• 2115/2125’s - Max Torque 300 ft/lb• 2135’s - Max Torque 780 ft/lb (1100 NBT) Feather-able trigger • One-hand forward/reverse. 2 year limited warranty

Item # Anvil Contents Sale

IRW7150 1/2” Standard Impact Only $436.55IRW7150-K1 1/2” Standard Impactool, Charger, 1 Li-ion Battery & Case $602.82IRW7150-K2 1/2” Standard Impactool, Charger, 2 Li-ion Batteries & Case $729.01IRW7250 2” Anvil Impact Only $462.13IRW7250-K1 2” Anvil Impactool 1 Li-ion Battery & Case $626.69IRW7250-K2 2” Anvil Impactool 2 Li-ion Batteries & Case $754.59IRTL5110 Cordless LED 180 lumens LED $111.46

• 780 ft-lb reverse torque and 1100 ft-lb nut-busting torque from a tool weighing just 6.8 lb• High-power lithium-ion battery, all-metal drive train, and reinforced housing• Optimized balance• Smart charging station for IQV20 batteries — features auxiliary USB charge port

Compact size — 6.6” from tip to tail allows for greater accessibility and versatility• All metal drivetrain and hammer mechanism with Maximum

torque at 180 ft./lbs.• Lithium ion 1.5 ahr battery included with specified kits

20 volt Cordless 1/2” Drive Impact Wrenches

Item # Drive Batteries Sale

IRW5130 3/8” None $308.66IRW5130-K1 3/8” 1 $425.47IRW5130-K2 3/8” 2 $536.31IRW5150 1/2” None $316.33IRW5150-K1 1/2” 1 $431.44IRW5150-K2 1/2” 2 $550.81

114




CORDLESS TOOLS

DWDCK280C2 $357.71

20v MAX LI-ION COMPACT DRILL & IMPACT COMBO• DCD780 20V MAX* 1/2” drill/driver features

two speed transmission (0-600 / 0-2,000)• DCF885 20V MAX* 1/4” impact driver

features 3 LED lights with 20 second delay to provide visibility without shadows Includes

• (2) 20V MAX* Lithium Ion 1.5 Ah BatteriesFREE Extra Battery (Value $120)

1/2” DRIvE 18v CORDLESS XRP™ IMPACT WRENCH PROMO KIT 3/8” IMPACT AND LIGHTDewalt Bonus Days!• 300 ft-lbs of maximum torque to perform

a wide range of heavy-duty fastening applications

• Heavy-duty impact mechanism directs torque to fastener without kickback

• Max Torque 300ft-lbs• Tool Weight 7.55lbs, Length 10-3/4” Includes:• 1 hour charger• (2) 18V XRP™ batteries• FREE 10 Piece Socket Set and Flashlight

(Value $80)DWDW059K-2 $459.29

Item # Desc. Features Sale

DWDCB103 20V Dual Port / Dual Voltage Charger Two Ports Charge most Dewalt Batteries: 12V - 20V MAX* Li-Ion batteries or 7.2V - 18V NiCd/NiMH/Li-Ion batteries $153.46

DWDCB200 20V MAX* Lithium Ion Compact Battery Pack 3.0 Ah extended run-time battery provides long run-time & battery life. Weighs 1.42 lbs $139.94

DWDCB201 20V MAX* Lithium Ion Compact Battery Pack Lightweight design and quick 30 minute charge time $110.33

Kit Includes a FREE 3rd 20v Battery

20v MAX COMPACT 1/4” 3-SPEED BRUSHLESS IMPACTING DRIvER KITS3 Speed Design; Push Button Chuck makes for one handed operation for accessory changes• Three (3) LED area lights • Battery fuel gauge indicator • Belt Hook & Accessory Storage; included • No Load Speed 0 - 2850 / 1900 / 950rpm• Impacts/Min 0 - 3300 / 2400 / 1300ipm• Max Torque 125 / 75 / 42ft-lbs• Includes: (2) 20V MAX* Lithium ion Battery

Packs, 30 Minute Fast Charger, belt Hook and Kitbox

Item # Batt. Sale

DWDCF895C2 1.5 ah $399.06

DWDCF895L2 3.0 ah $499.17

20v MAX* Lithium Ion LED Work Light

DWDCF883L2

3/8” DRIvE 20v MAX* LI-ION HIGH-TORQUE IMPACT WRENCH• Compact (5.70” front to back), lightweight (3.4

lbs) design fits into tight areas• Three (3) LED lights with 20 second delay after

trigger release provides visibilitywithout shadows• Hog ring anvil to easily change sockets• Textured anti-slip comfort grip provides

maximum comfort and control• Battery fuel gauge indicator with three LED lights

provides end users with guidance about the level of battery run-time available in the pack

• Drive Size 3/8” Hog Ring Anvilin• No Load Speed 0-2,300rpm• Impacts/Min 0-2,700ipm• Max Torque 130ft-lbs FREE Light and Socket Set (Value $90)

$374.12

DWDCF885C2

20v MAX 1/4” HEX IMPACTING DRIvER KITCompact and lightweight design fits intotight areas• Three (3) LED lights with 20 second delay

after trigger release, provide visibility without shadows

• One-handed loading 1/4” hex chuck accepts 1” bit tips

• Belt hook included for portability• No Load Speed 0 - 2,800rpm with up to 3,200

impacts per minute• Max Torque 117ft-lbs• Includes: (2) 20V MAX* Lithium Ion 1.5 Ah

Battery Packs, 30 Minute Fast Charger, belt Hook, and Kitbox

$302.83 DWDCG412L2

20v MAX* LI-ION 4-1/2” CUT-OFF TOOL KITQuick-Change™ Wheel Release allows for tool

free wheel changes • Tool free guard allows for quick, easy guard

adjustments/positioning• 2-finger trigger switch (w/ lock-off button) • 2-position side handle • Battery fuel gauge indicator • Includes (2) 20V MAX* Li-Ion 3.0 Ah Battery

Packs, Fast Charger, Type 1 (Cutting) Guard, 2-Position Side Handle, and Contractor Bag

$427.65

Incredible Offers! XRP

20 volt Replacement Accessories

FREE!FREE!

FREE!FREE!

FREE!


115



CORDLESS TOOLS AND DRILLS

• 120V/60Hz, 7.5 amp motor• Rocker switch for easy one hand reversing & forwarding• 185 ft-lbs max torque, 2,100 RPM no load speed. 6 ft cord

Li-ion 8v Super Compact¼” drive Drill/Driver• 111 In-Lbs of torque, 0-380 RPM• 5 Torque Settings + Drill Mode. Automatic Spindle Lock to break bolt/screw/nut free• Built in LED to illuminate work area on drill• Two place charger, 30 minute charge time.• Two batteries and LED flashlightIncludes FREE 3/8” Impact Wrench with 75ft/lb torque Variable Speed trigger, and Electric Brake Switch (Value $150)

FREtE 3rd Battery

DEARW1201

12v 3/8” LI-ION RATCHET KITEasy to use and manuever - weighs

only 3 lbs, and 12.4” long• Powerfull 57 ft-lbs (78 Nm) for max.

torque application.• Anti-slip soft grip provides comfort

and good protection during work.$204.56

DWDCF815S2

12v LITHIUM ION IMPACT DRIvER KIT• 1/4 Drive hex for quick change, Max Torque 950

in-lbs (79 ft/lb), Tool Length 6-1/4 “ • One-handed loading 1/4” hex chuck accepts

1” bit tips• (2) 12V MAX* lithium ion battery packs with fast

charger• 3 LED Lights provide visibility without shadows• Compact, lightweight design fits into tight areas,

2.3 lbs• Belt Hook & Impact Ready Bit Tip, Contractor

Bag• Impacts/Min 0-3,400 ipm, No Load Speed

0-2,450 rpm• 3 Year Limited Warranty

$208.17

DWDCF813S2

12v LITHIUM ION 3/8” IMPACT WRENCH KIT• 3/8” Drive with Hog ring anvil; Fast socket

changing, • Impacts/Min 0-3,400 ipm No Load Speed

0-2,450 rpm• Max Torque 1150 in-lbs (96 ft/lb), Tool Length

6-1/4”, Weight 2.3 lbs• 3 LED Lights provide visibility without shadows• Compact, lightweight design fits into tight areas• (2) 12V MAX* lithium ion batteries and fast

charger• 3 Year Limited Warranty

$208.17

DWDCD710S2

12v LITHIUM ION DRILL/DRIvER KIT• Belt hook included for portability• LED light provides visibility in dark areas• 3/8” drill/driver with 15 clutch settings, Max rpm

1,500. Two speed transmission for optimal speed and torque control

• Compact, lightweight design fits into tight areas• Includes fast charger, belt hook contractor bag

and (2) 12V MAX* lithium ion battery packs • 3 Year Limited Warranty

$208.17

FREE!

FREE!

FREE!

DEARD847LI

1/4” HEX DRIvER KIT

$215.33

DWDCD740C1

20v MAX* LITHIUM ION 3/8” RIGHT ANGLE DRILL/DRIvER KITDual speed ranges (0-650/0-

2000) rpm for increased user flexibility providing a wide range of applications

• Compact front to back length (4.0”)

• Multi-grip trigger • 3/8” Ratcheting Chuck with Deep Hex Pocket • Includes: (1) 20V Max 1.5 Ah compact li-ion

battery 30 Minute Fast charger, kitbox, Belt hook, 2” Phillips tip bit

$284.63

DWDCD780C2

20v MAX* LITHIUM ION COMPACT DRILL / DRIvER KITCompact, lightweight design fits into tight areas• 2 speeds (0-600 & 0-2,000 rpm) • Ergonomic handle delivers comfort and control• Heavy-duty1/2” ratcheting chuck • Includes: (2) 20V Max* lithium ion battery

packs, 30 Minute Fast charger, Belt hook, On-board bit holder, and Kitbox

$308.08

DWDCD980L2

20v MAX* LITHIUM ION PREMIUM DRIvING DRILL KIT3-Speed all-metal transmission matches the tool to task! • Heavy-duty 1/2” metal ratcheting chuck with

carbide inserts provides superior bit gripping strength

• LED light with 20 second delay after trigger release

• High power, high efficiency motor delivers 535 unit watts out of max power

• Includes: 1 hour charger, (2) 20V (3ah) Max* Lithium Ion Batteries, 360° side handle, Kit Box

$396.92

DWDCF889HL2

20v MAX 1/2” HIGH TORQUE IMPACT WRENCH W/HOG RING ANvILVariable speed trigger with electric brake provides user improved control, 300 ft-lbs. of maximum torque • LED light provides user greater visibility when

working in dark environments• 1,650 rpm / 2.600 ipm for faster application

speed$473.33TN22152

ELECTRIC IMPACT WRENCH 1/2” DRIvE

$120.68

DEARI2044-B

LI-ION 18v 3/8” ANGLE IMPACT WRENCH WITH DIGITAL CLUTCH • Electronic clutch with 5+Manual

torque settings• LCD display shows torque stage,

battery indication and torque stage memory functions.

• 95 ft-lbs. (128 Nm) for max. reverse torque and 60 ft-lbs. (80 Nm) for tightening torque applications.

• 0-2,000 rpm / 0-3,000 ipm for faster speed application.

$419.94

DWDCK413S2

4 TOOL 12v MAX COMBO KIT4 Most Popular Tools Completes the 12 Volt Max

Kit• DCS310 12V MAX* pivot recip saw • DCD710 12V MAX* 3/8” drill/driver (0-400/0-

1500)• DCF815 12V MAX* 1/4” impact driver • DCL510 LED worklight delivers 510 lumens • (2) 12V MAX* Li-Ion batteries, charger and

acessories with kit bag

$367.33

116




CORDLESS IMPACTS AND DRILLS

Item # Drive Style Sale

MWK2456-20 1/4” Ratchet $149.23MWK2456-21 1/4” Kit $222.99MWK2457-20 3/8” Ratchet $165.15MWK2457-21 3/8” Kit $222.99

M12 Cordless Ratchets and Kits• 30 ft./lbs. of torque with quick RPM to remove and fasten in tight places• LED Spots at the front of the tool helps illuminate work areas.• Kits include one M12 Red lithium-ion battery

MWK2493-24

RATCHET DRILL WRENCH AND LIGHT COMBO KIT4-Tool Combo Kit Includes all the small cordless

popular tools needed for automotive mechanical repair.

• Includes 1/4” Ratchet, compact 3/8” Drill Driver, 3/8” Impact Wrench, light, (2) M12 Li-Ion Batteries, 30-Minute Charger, and Carry Bag

$438.28

MWK2696-23

M18 LI-ION Hv 1/2” AND 3/8” IMPACT TOOL KIT3-tool Combo Kit includes• 1/2” High Torque Impact Wrench with Friction

Ring (450 ft- lbs of torque) • 3/8” Compact Impact Wrench with Friction Ring • 135-degree rotating headWork Light • 2 M18 XC LITHIUM-ION high volt batteries• 1-Hour Charger, Contractor Bag

$651.58

MWK2441-21

M12 CORDLESS CAULK AND ADHESIvE GUN KIT• Consistent beads resulting cleaner, faster

installations• Variable speed trigger and 6-setting max

speed dial deliver complete flow rate control• Dispense up to150 10oz tubes of building

sealant on one battery charge$242.31

MWK2429-20

M12 SUB COMPACT BAND SAW• Bare Tool comes equipped with (1) 18 TPI metal

cutting blade.$219.51

MWK2429-21XC

M12 SUB COMPACT BAND SAW KITCan cut through 3/4” EMT in only 3 seconds, and

will get over 150 cuts per charge with the M12™ REDLITHIUM™ XC High Capacity battery.

$320.83

MWK2603-22CT

M18 FUEL BRUSHLESS MOTOR 1/2” DRILL KIT

$372.57

MWK2641-21CT

M18 CORDLESS CAULKING GUN KITThis powerful new applicator delivers incredible

pushing force for tough applications and the highest level of bead control available in any cordless tool. 950 lbs. of Dispensing Force

• Variable Speed Trigger, Constant Flow Technology

• Anti-Drip Mechanism, 6-Setting Max Speed Dial

$424.47

MWK2653-22CT

M18 FUEL BRUSHLESS 1/4” HEX IMPACT DRIvER KIT• POWERSTATE™ Brushless Motor for up to 3X

longer motor life and increased power. • 3 fastening modes with the DRIVE CONTROL™

with up to 1600 in-lbs. of torque • REDLITHIUM™ Battery Packs provide up to 50%

more run time • Includes (2) M18™ REDLITHIUM™ Compact

Battery Packs,30-Minute Multi-Voltage Charger Belt Clip, Carrying Case

$372.57

MWK2454-22

M12 FUEL 3/8” SQUARE DRIvE IMPACT DRIvERFeatures: POWERSTATE™ Brushless Motoroutperforms all leading competitors withconstant power output, yet runs coolerwith no wearable components. • Peak Torque 117 ft-lbs (1,400 in-lbs)• No Load Speed 0-2,650 RPM• No Load IPM 0-3,500• Includes: (2) M12 REDLITHIUM™ 2.0 Compact

Battery Packs, M12™ Lithium-ion Battery Charger, (1) Belt Clip and Carrying Case

$316.96

MWK2101-22

M4 FOLDING SCREWDRIvER KITFeaturing 44 in-lbs of peak torque and a

21-position clutch with auto shut-off • Two speeds, 200 and 600 RPM, offer further user

control for precision work.• 1/4” quick-change chuck for one-handed bit

changes. • Includes tool, 2-M4-2 amp Li-ion batteries, and

charger$212.95

MWK2403-22

M12 FUEL 1/2” CHUCK DRILL DRIvERPOWERSTATE™ Brushless Motor with constant

power output, yet runs cooler and quieter with no wearable components.

• Built-in LED Light illuminates the work surface. • Length 7.75”, Peak Torque 350 in-lbs• Chuck Type 1/2” Metal Single Sleeve• Ratcheting Lock Speed 0-450/0-1,700 RPM• Includes a REDLITHIUM™ 2.0 Compact Battery

Pack and 4.0 Extended Capacity Battery Pack; Charger and case.

$296.44

MWK2793-22

M18 1/2” IMPACT WRENCH KIT WITH M12 RATCHETThe Best Combination ofPower and Efficiency2-Tool Kit Includes:• 2663 High Torque 1/2” Impact Wrench (450 FPT)• 2456 1/4” Ratchet• (1) M18™ REDLITHIUM Battery• (1) M12™ REDLITHIUM Battery• Multi-Volt Charger. 48-55-3550 Service Bag

$597.29

MWK2452-22

M12 FUEL 1/4” SQUARE DRIvE IMPACT DRIvERThe M12 FUEL™ 1/4” Impact Wrench optimizes

torque in tight spaces with 500 in-lbs of torque.• POWERSTATE™ Brushless Motor outperforms with

constant power output• Peak Torque 50 ft-lbs (600 in-lbs)• No Load Speed 0-2,650 RPM• Includes (1) M12™ REDLITHIUM™ Battery,

Charger, Belt Clip and Carrying Case

$316.96

• POWERSTATE™ Brushless Motor: Delivers up to 650 in lbs. of torque with

maximum sustained torque to complete the toughest of applications• Speed 2 Speed, RPM 0-550 / 0-1, 850 RPM• Charge Time 30 Minutes. Tool Length 7.9 in• (2) M18™ COMPACT REDLITHIUM™ Battery

Packs and Multi-Voltage Charger


117



CORDLESS AND ELECTRIC TOOLS

MKBTW450

18v LXT 1/2 IMPACT WRENCH KIT• Makita built motor delivers

325 ft. lbs. of torque in a compact size

• Motor provides 1,600 RPM and 2,200 IPM for added muscle for tough jobs

• Single L.E.D. light for increased job site visibility

$575.00


HA93761 1/4” Hex shank 1/4” x 2” ball $1.94HA93784 3/8” Hex shank 3/8” x 2” ball $3.20HA93795 1/2” Hex shank 1/2” x 2” ball $4.43

MKFD01W

12v LI-ION MAX 1/4” HEX DRIvER-DRILL KITMakita built motor delivers 200 in lbs of torque• 2 Speed design,

0 – 350 and 0 – 1300 rpm. 1/4” hex chuck for quick bit changes

• Ultra compact at only 1 7/16” long• Built in LED light illuminates the work area• Adjustable clutch for screw driving applications• Driver bit, 2, Li Ion batteries, Charger, Holster & Case

$171.15

MKFD02W

12v LI-ION MAX 3/8” DRIvER-DRILL KIT• 2-speed design (0-

350 & 0-1,300 RPM) covers a wide range of drilling and driving applications

• Ultra compact design at 7-7/16” long and weighs only • Built-in L.E.D. light illuminates the work area

• Includes driver bit, 2 ea. 12V max Lithium-Ion Battery, Charger, holster and case

$166.02

MKDT01W

12v LI-ION MAX CORDLESS 1/4” HEX IMPACTING DRIvER KITMakita-built motor

delivers 800 in.lbs. ofMax Torque in an ultra

compact size • Variable speed (0-2,400 RPM & 0-3,000 IPM• Only 6-1/8” long and weighs only 2.0 lbs. for

reduced operator fatigue • Built-in L.E.D. light illuminates the work area

$171.15

MKLCT309W

12v LI-ION MAX HEX, IMPACT DRIvER AND LIGHT KIT

• 3/8” Anvil Impact wrench with 74 ft/lbs, variable speed 0-2400 and up to 3200 impacts per minute • 3/8” driver drill with 200 in lbs of torque,• 2 – 12V Li Ion batteries, Light and case

$305.77

MKWT01W

12v MAX 3/8” ANvIL CORDLESS IMPACT WRENCH• 74 ft/lbs torque. Variable speed 0-2400 with up

to 3200 impacts per minute• Ultra compact design at only 6 ½” long • Includes 3/8” impact, 2 – 12V Li Ion batteries,

$190.38

MKLCT314W

3 PIECE DRIvER DRILL COMBO KIT 12vOLT• 2 speed driver drill 0

– 350 & 0 – 1300 rpm delivers 200

in lbs of torque • Variable speed

impact driver 0 – 2400 RPM & 0 – 3200 IPM produces 800 in lbs of trq

• L.E.D. Flashlight runs up to 9 hours from a single charge.

$244.23

MKLXT311FH

18 vOLT DRILL AND IMPACT KIT• 3/8” Impact Wrench packs 155 ft. lbs. of maximum

torque (3,200 IPM & 2,100 RPM) • 1/2” Driver-Drill with a 4-pole motor delivers 450

in.lbs. • 4-Position Flashlight with Xenon bulbs runs 4.3 hrs. • 15-Minute Rapid Optimum Charger • Includes 2 LXT Lithium-Ion batteries, one each 1.5

and 3.0 amp (BL1815/BL1830) so it integrates with the entire 18V LiIon platform

$613.46

MKLCT212W

2 PIECE DRILL AND RECIP SAW KIT• 2-Speed 3/8” Driver-Drill (0-350 & 0-1,300 RPM)

delivers 200 in.lbs. of Max Torque in an ultra compact size of only 2.2 lbs.

• Recipro Saw provides 0-3,300 SPM for fast cutting and a dual-position on/off switch allows for either paddle switch or trigger switch operation

$296.60

MKRJ01W

12v MAX LITHIUM-ION CORDLESS RECIPRO SAW KITDelivers 0-3,300 strokes per minute combined with a 1/2” length stroke for faster cutting. • Built-in L.E.D. light illuminate the work area• Includes 2 ea. 12V max Lithium-Ion Battery

(BL1014), 1 Charger (DC10WB), 2 ea. Recipro Saw Blades

$221.98

MKLXDT04CW

18 vOLT LI-ION 1/4” CHUCK COMPACT DRIvERBuilt-in L.E.D. light with afterglow illuminates the work area • Variable speed (0-2,300 RPM & 0-3,200 IPM)

and 1420 IPT $283.54

MKLXLM03

18v LED FLASHLIGHTExtra bright 12 L.E.D. flashlight provides 240 lumen.

$57.12

MKLXPH01CW

18v COMPACT LITHIUM-ION CORDLESS 1/2” HAMMER DRIvER-DRILL KITMakita-built 4-pole motor delivers480 in.lbs. of Max Torque• Variable 2-speed design (0-400 & 0-1,500 • Built-in L.E.D. light with afterglow illuminates the

work area$363.29

MKBCF201Z

18 v LI ION FANDurable design engineeredto withstand shop use.• Two settings: high 1,700 rpm and low 1.300 rpm for optimal air velocity.• Up to 3 hours of continuous use.• Batteries and charger sold separately.

$121.25

MKLXRM03B

SHOP RADIO WITH IPOD DOCKING STATIONBuilt in iPod docking station works with most models of iPod and iPhone for charging and playing music. Water resistant construction engineered for improved operation in harsh conditions.• Up to 16 hours run time with an 18V LXT battery.• Compact design at only 10.4 lbs.• Illuminated control buttons and dial.• Delivers rich stereo sound from 2 side firing speakers. Uses Makita 9.6V – 18V batteries (batteries not included) or 115 V plug in

$221.98

118




Reciprical Saw Blades

SAWS, BLADES AND BITS LIGHTING AND POWER CORDS

Milwaukee Sawzall Blades

Scroll

CP7901

LOW vIBRATION RECIPROCATING AIR SAW• 10,000 strokes per minute• Lock off throttle protects against accidental start

ups, Adjustable guide, Rear exhaust• Ergonomic design

$215.40CP7900RECIPROCATING SAW

$159.50

IR4429

SUPER DUTY AIR SAW• Super Duty Air Saw, Piped away exhaust hose• Adjustable guide. Strokes per minute: 5,750

$172.50

IR429

HEAvY DUTY AIR SAW• Heavy Duty Reciprocating Air Saw• Strokes per minute: 10,000• Average air consumption: 8 cfm

$137.12

IR325B

HEAvY DUTY AIR NIBBLER• Cuts out quarter panels without distorting the edges of the material• Start cuts in the center of a panel• Holds a tight 1/4” radius with great accuracy• Easy to operate and control• Balanced, lightweight tool and requires 1/2”

pilot/starter hole

$225.58

IR7802SA

HEAvY DUTY AIR SHEAR

Reciprical Saw Blades

• Cutting shear makes clean cuts in cold rolled steel up to 20 gauge without chips. • Cuts squares, angles, and circles. • Shears most types of plastics and all types of

aluminum, tin, and steel.

$252.12

Item # Lgth Teeth/In. Use Sale

LE20560-606R 6” 6 Alum/Wood $19.41LE20562-610R 6” 10 Alum/Wood $20.36LE20564-614R 6” 14 Steel $20.36LE20566-618R 6” 18 Steel $20.36LE20568-624R 6” 24 Steel $20.36LE20578-818R 8” 18 Steel $25.78LE20580-810R 8” 10 Alum/Wood $25.80LE20582-956R 9” 6 Alum/Wood $30.65LE20583-110R 10” 10 Alum/Wood $39.29LE20585-156R 12” 6 Alum/Wood $39.31

Item # Length Teeth/In. Use Sale

HA372118P5 12” 18 Steel $24.92HA372606P5 6” 6 Wood $10.51HA372618P5 6” 18 Steel $11.46HA372624P5 6” 6 Steel $11.46HA372656P5 6” 6 Steel $11.03HA372810P5 8” 10 Steel $12.50HA372956P5 9” 6 Steel $18.53HA372966P5 9” 6 Steel $25.51

Item # Length Teeth/In. Style Sale

TA90000 3” 18 Scroll $10.77TA90010 4” 18 All Purpose $10.77TA90020 3” 24 Scroll $10.77TA90030 3” 32 Scroll $10.77TA90040 4” 32 All Purpose $10.77TA90050 3”, 4” Assorted Assorted $10.77TA90060 4” 24 All Purpose $10.77

All Purpose Air Saw Blades

IR529

LOW vIBRATION AIR RECIPROCATING SAW• Composite grip for improved comfort during

extended use • Adjustable rear exhaust directs air away from

the work-piece• Tool includes 3 fine tooth and 3 coarse tooth

blades$221.15

MWK6509-31

RECIPROCATING ELECTRIC SAWZALLPowerful 12 Amp Motor: Delivers 0-3,000 SPM • 3/4” Stroke Length: Provides maximum cut

control • QUIK-LOK™ Blade Clamp: Provides fast , tool-free

blade changes • Stroke Length 3/4”, Length 19” includes carry

case$186.67

Item # Lgth TPI Style Pack Price

MWK48-00-5182 6 14 Super 5 $13.33

MWK48-00-5184 6 18 Super 5 $13.33

MWK48-00-5186 6 24 Super 5 $13.33

MWK48-00-5188 6 14 Super 5 $16.41

MWK48-00-5712 6 10 Torch 5 $18.46

MWK48-00-5713 9 10 Torch 5 $24.51

MWK48-00-5787 9 14 Torch 5 $24.51

MWK48-00-5788 9 18 Torch 5 $24.51

MWK48-01-6182 6 14 Super 50 $102.88

MWK48-01-6184 6 18 Super 50 $102.88

MWK48-01-8784 6 18 Ice 50 $192.31

MWK48-01-8787 9 14 Ice 50 $254.81

Three Types of Blades for Most Fabrication Needs• Super Sawzall -Matrix II bi-metal teeth for greater durability• Torch - Designed for demolition, plumbing, remodeling with flex-a-bility in tight cutting situations. • Ice Hardened - cryogenically treated to be consistently hard throughout, for up to 50% longer

DWDCS380L1

20v MAX KI-ION RECIPROCATING SAW KIT(3.0 AH)4-Position Blade Clamp allows for flush cutting • 1-1/8” stroke length delivers a fast cutting speed. • Variable speed trigger with 0-3000 spm provides

increased blade control and faster cut speeds. • Pivoting adjustable shoe extends blade life and

allows depth of cut control. • (1) 20V MAX* Lithium Ion 3.0 Ah Battery Pack,

Fast Charger, Kit box$362.46

DWDCS310S1

12 vOLT PIvOTING RECIP SAWAdjustable 3-position pivoting handle for difficult

cuts in confined spaces• Variable Speed Trigger with 0-2700 spm • Bright LED Light illuminates dark work • Blade reverses for greater access to tight spaces • Includes (1) 12V MAX* Li-Ion Battery Pack,

charger blades and bag

$199.95

FREE!


119



LIGHTING AND POWER CORDS

Specialty Lights

Single high-performance array LED with no Shadows or Hotspots• Modular design to easily replace parts when

needed• Sliding hook & optional magnet – Aircraft-grade

aluminum chassis, no-slip grip, & recessed on/off switch- flexible work area positioning

NE21850

50’ OSHA APPROvEDANGLE LIGHT ON REEL• 50’ OSHA Approved Angle Reel Light

$173.32

NE10025

13 WATT 25’ “X-LIGHT”• 13 amp convenience outlet. 16/3 oil & water

resistant. 20% more light$67.12

NE80025

13 WATT COMPACT DROP LIGHT• 25’ Deluxe, straight tube, 13 Watt

$48.86

BY8903

TRIPLE TAP EXTENSION CORD• 3, 13 amp grounded receptacles and plug. 14/3

SJTA cord$129.98

BY8904

QUAD TAP EXTENSION CORD• 4, 15 amp grounded receptacles, 12/3 SJTW cord

$157.60

NE23T50

50’ EXTENSION CORD REEL• 50 Ft Cord Reel Tri Tap 16/3 Extension Cord

$162.42

50" Retractable Extension Cord Reels• Smooth Glide rewind, Thermoplastic cord insulation,Oil and Chemical resistant

NE68025A

UNBUSTABLE BUMPER LIGHT• Designed to absorb maximum impact• 13-Watt 50 Kelvin bulb• On/off switch and top hook• 25 ft. 18/2 SJTOW cord- oil and water resistant

$40.83

Item # Lng. Style Gauge Amp Price

BYSL-740L A 25’ Triple 14/3 15 $28.07

BYSL-741L A 50’ Triple 14/3 15 $51.41

BYSL-993 B 25’ Single 16/3 10 $22.08

BYSL-994 B 50’ Single 14/3 13 $53.16

BYSL-996 B 25’ Single 12./3 15 $41.49

BYSL-997 B 50’ Single 12./3 15 $73.03

BYSL-990 C 25’ Single 16/3 13 $22.20

BYSL-991 C 50’ Single 16/3 13 $45.42

BYSL-992 C 100’ Single 16/3 13 $83.98

BYSL-752L D 25’ Single 14/3 15 $25.92

BYSL-753L D 50’ Single 14/3 15 $48.26

Item # Style Price

CG123107 25’ $100.92

CG123115 50’ $114.95

CG223112 40’ Reel $184.00

A

Item # Style Watt Notes Price

NENESF25T8CW Under Hood NA Fits NE30025 $14.79

NE13RS U Bulb 13Rough Service $11.24

CE11006-17 U Bulb 13Silicone Rough Service

$13.99

BYSL-103PDQ U-Bulb 13 Standard $5.11

Extension Cords

C

B

Contractor Grade Extension Cords with Safety Lit Ends

Rough Service Bulbs are Specially Manufactured to Add Longevity to Daily Use of the Appliance

LIGHT BULBS

D

Uni-Beam Corded Lights

Designed to put light where you need it featuring its Contact Only Swivel Head • Shockproof dual C4® premium LED technology delivers 200 lumens • 4 modes:High 3.5 hour runtime, 16 hour runtime, Moonlight – 20 day runtime Flash – 8 hour runtime

Item # Desc. Sale

SG90607 120V AC & DC, Black $209.66SG90613 120V AC & DC Piggyback, Black $247.63SG90627 120V AC & DC, Yellow $209.66SG90633 120V AC & DC Piggyback, Yellow $247.63SG90641 Black with Alkaline Batteries $114.73SG90642 Yellow with Alkaline Batteries $114.73

Knucklehead Pivot Multitasking Work Lights

JS96666

MINI HIGH POWER RECHARGEABLE LED FLASHLIGHTMini High Power Rechargeable LED Flashlight• Tough aluminum body is anodized inside

and out• Cree XP-G R5 LED is efficient on power and

high output and service up to 100,000 hours continuous run time

• Multi-function switch toggles through Maximum, Medium, Low, SOS and Strobe

• Shatter resistant PC lens• Li-Ion battery pack included• Built-in recharging port with rotating collar to

protect from the environment• Water resistant

$61.04

TLXTLF-NF31D-BLK

1000 LUMEN RECHAGEABLE LED FLASHLIGHT1000 lumens / 500 lumens / <100 lumens of

usable lighting and a high duty cycle design• Lithium Ion rechargeable batteries• Run time of up to 2 hours, Single or Tri-Mode • Aircraft grade aluminum • Modular design allows for an upgrade

path that to the newest technologies when upgrades are made to the design

• Length:9 3/4?, weighs 1.1lb • Settings: Single or Tri-Mode

$189.00

120




LIGHTING AND LED CORDLESS LIGHTS

BYSL1005

1000 WATT DUALHALOGEN TRIPOD• 1000 Watt Dual Halogen Tripod

$64.62

Durable, And Built For Years Of Use!

BYSL821

40’ ANGLE FLUORESCENT WORK LIGHT WITH TOOL TAP• Heavy duty cord reel for longer life• Easily mounts horizontal or vertical

$71.41


Cool Running 13W 10,000 Hour Rated Bulb (included). Polarized Plug with 12 amp Grounded Receptacle.

BYSL-520 Stubby Fluorescent 25ft Work Light $28.85

BYSL550 Stubby Fluorescent 50ft Work Light $35.64

BYSL904 25’ Angle Fluorescent Light With Tool Tap $29.18

BYSL964 50’ Angle Fluorescent Light Withtool Tap $37.89

Item # Length Sale

CE121CP 25’ $73.10

CE122CP 50’ $100.02

BYSL-825

13 WATT FLOURESCENT WORK LIGHT• HD Metal Retractable 25’

Reel, Cool Running 13w 10,000 Hour Bulb is equivalent to 75w incandescent. • Polarized Plug w/10 Amp

Grounded Receptacle, $83.76

BYSL-827

OSHA COMPLIANT FLUORESCENT WORK LIGHT• Cool Running 13 watt 10,000 Hour Rated Bulb (included), 50’ Metal Reel • Clear Chemical Resistant Lamp Protector. Nylon-

Tipped Double Hang Hook

$84.70

BYSL-875

26W FLUORESCENT REEL LIGHT• 40’ Metal Reel Heavy-Duty Metal Retractable Reel• 2 Cool Running 13w 10,000 Hour Rated Bulbs • Polarized Plug with 10amp

Grounded Receptacle$109.96

BYSL-975

26 WATT FLUORESCENT WORK LIGHT• Vision enhancing 26 watt

fluorescent work light has comparable light output to a 125 watt incandescent.

• Independent rocker on/off switches allow full or half power light output.

• Electronic ballast for instant no-flicker cold weather starts.

• 12 amp grounded receptacle • 16/3 SJT 25 ft Cord

$51.53

CE13003CAL $174.36

UNDERHOOD LIGHT WITH FREE DIGITAL CALIPER• Gives hands-free lighting of the entire engine compartment.• Made in the U.S.A. • 25 watt cool running fluorescent bulb; 44”

long• Extra thick shatterproof housing with a 25’

long cord Light-Perch™• Opens from 4’ to 6’6”• Self adjusts to fit most hoods• Includes a FREE Digital Caliper 3C351 (Value $20)

A

BYSL-864

60 LED REEL LIGHT• Durable Push-button switch Control• Dual position removable magnetic

hook• Impact / chemical / moisture resistant• 50 ft Retractable Cord Reel with

polarized 3 prong plug, 18/2 SVT

$104.40

NE678R

78 LED RECHARGEABLE WORK LIGHT• Collapsible hook in handle allows more

versatility• Unique three position switch - (1) off, (2) 1/2 half

power with a bank of 39 LEDs and (3) full power with 78 LEDs.

• Approx 7.5 hours on half-power (39 LEDs) or 4.5 hours on full power (78 LEDs)

$65.93Item # Item Length Style Sale

CE12006 A 25 Cord $59.98CE12007 A 50 Cord $79.03CE12009 B 25 Reel $118.70CE12010 B 40 Reel $159.67

Bouce Lights with 13 Watt Bulbs

One of the most popular lights available for heavy duty industrial shop use. It features a rough service patented Bounce Bulb that is silicone injected for superior impact protection and longevity. Soft Rubber cap ends aid in shock absorbtion to prevent damage if dropped.

When Extreme Durability in a Light is Needed… Super Bounce Light Comes to the Rescue!• Extra thick tube style • Patented 13 watt for superior impact protection• Cold weather cord for superior flexibility outdoors

Super 13 Watt Fluorescent Bounce Lights

NE75044

LUMINETRIC LED UNDERHOOD LIGHT• 8 Super bright lumetronic LED’s• Cushion piveting hinge hooks grip to most

area’s without scratching• 300 lumens • Shock resistent, unbreakable tube, 25’ cord of

18/2 gage Spring loaded aluminum bar$195.36

B

NE30025

UNDER HOOD LIGHTUnderhood EXTEND-A-LITE detaches easily

from bar. • Light weight and durable polycarbonate

lens tube. • 25 Powerful watts of fluorescent light to be

attached nearly anywhere the user wants.• Special removable straps allow light to

be used without the included light-bar apparatus.

$156.35


121



SPECIALTY LIGHTING AND FLASHLIGHTS

SG88033

C4 LED 2AA Battery Tactical Pocket Light

SG88032

C4 LED 1AA Battery Tactical Pocket Light

$56.13

$57.79

SG51046 $77.27

Modular flashlight design - Will neverbecome obsolete due to new LED technlolgy • 300 lumen output, 9” long• Over 2 hours runtime on a single charge• Tactical beam pattern for max throw, & even spill area• Single mode, momentary switch & water

resistant

Item # Color Style Sale

SG74341 Red AC/DC, 1 Charger $159.03

SG74342 Blue Light and Battery $112.82

SG74343 Blue AC/DC 1 Charger $159.03

SG74345 Lime AC/DC, 1 Charger $159.03

SG74347 Orange AC/DC, 1 Charger $159.03

SG74349 Purple AC/DC, 1 Charger $159.03

SG74340 Red Light and Battery $112.82

SG74344 Lime Light and Battery $112.82

SG74346 Orange Light and Battery $112.82

SG74348 Purple Light and Battery $112.82

SG74350 Pink AC/DC, 1 Charger $162.23

SG74301 Black AC/DC, 1 Charger $156.61

SG74300 Black Light and Battery $109.45

SG74302 Black AC/DC, 2 Holders $186.07

Item # LED Features Sale

OT5550 10W Single

U.V. Top Light, Magnetic Base,350 LUX $155.02

OT5551 9W Triple 1 LED 3W Top Light, Magnetic Base, 350 LUX $125.95

OT5552 30 LED 4 LED Top Light, Magnetic base 350 LUX $106.56

C4 LED 1 Lithium Ion Battery Tactical Pocket LightSG88030 $61.91

$70.16SG88031

C4 LED 2 Lithium Ion Battery Tactical Pocket Light

The combination of small size and C4® LED output results in one of the brightest tactical personal carry lights for its size High, low and strobe modes. Rubber push button tail cap switch. Impact-resistant tempered glass lens. Includes batteries

SG73003

PINK NANO KEY CHAIN LIGHT• 1.47” Long Weatherproof, personal flashlight

featuring a 100,000 hour life LED.• Pink LED Keychain Flashlight helps light the way to saving lives. For every light sold,

Streamlight will donate $1 to the Breast Cancer Research Foundation

$12.12 SG73002

BLUE COPS NANO KEY CHAIN LIGHT• $1.00 from this purchase is donated

to C.O.P.S.® Inc. - (Concerns Of Police Survivors)

$12.12

• 3 variable intensity modes, strobe mode and the latest in power LED technology with a candela of 8800/160 lumens• Run times up to 7.5 continuous on low intensity• Lithium ion battery is rechargeable up to 500 times; fully recharges in 3 hrs.• IPX7 rated design for water resistance• Multi-function, push-button tactical tail switch.

Rechargeable Trouble Lights with a Flashlight with the Latest In LED Technology. • Magnetic Base With A Hang Hook• Fully Rubberized, waterproof and Impact Resistant Housings

OTC Spectrum Solar Rechargeable Lighting Products

Strion LED Rechargable Kits

Borofloat High Temperature Glass

Grooved Barrel Adapts To Long Gun Mount

Anti-roll Head

SG44000

vULCAN AC/DC LANTERN SYSTEM• Vulcan high intensity halogen features a high-impact, waterproof, ABS thermoplastic housing and delivers up to 50,000 candlepower. • Rechargeable up to 500 times with up to 9

hours of continuous use between charges.• 3 watt spot up to 25,000; 8 watt spot up to

50,000$150.49

SG45117

LIGHTBOX AC/DC LANTERN SYSTEM• Lightbox features a 90 degree swivel head,

high impact, ABS thermoplastic with rubberized bumper, lens ring and cushioned grip handle.

• High intensity 8-Watt spot halogen lamp produces up to 50,000 candlepower for up to 8 hours of run time per charge.

• Rechargeable up to 500 times. Includes shoulder strap and mounting rack.

$188.74

Anodized Bodies Guard Against Extreme Weather Conditions

ULRT2-LTCH

RECHARGEABLE ROTATING MAGNETIC 24 LED WORK LIGHTStrong Magnetic Base Attaches to Any Ferrous Metal, Rotating Head Pivots to Direct Light to Any Needed Angle. 24 High Intensity LED Lights. Sturdy Aluminum Red Housing• Rotates 360°. Includes a 110 Volt Charger

$49.45

ULRT-48LT

48 LED ROTATING HEAD WORK LIGHT• 48 High Intensity LED Lights• Strong Magnetic Base

Attaches to Any Ferrous Metal.

• Rotating Head Pivots to Direct Light to Needed Angle. Includes (3) AA Batteries

$39.56

Item # Color Price

TLXTLF-NFSTC-BK Black $114.85

TLXTLF-NFSTC-OR Orange $114.85

InfiniStar CR LED Rechargeable Flashlights

PROTAC 3 MODE 80 LUM

SG66418

STYLUS PRO REACH LED WITH MAGNETThe Stylus Pro Reach is a sleek compact pen

sized flashlight featuring a polyethylene coated flexible cable. Over 14” length overall

$45.47

NIGHT COM Uv AND C4 LED FLASHLIGHTChoose between far-reaching, bright, white light

or ultraviolet light for detection of fraudulent documents, or detecting engine and HVAC leaks.

• Push-button tail switch • Powered by two 3V CR123A lithium batteries

(included)

• Push-button tail on/off switch for one-handed operation

• LED Solid State power regulation

• Uses two AAA alkaline batteries (included)SG88039 $41.28

OT5550 OT5551 OT5552

122




FLASHLIGHTS

High, Low and Emergency signal functions and is IPX8 Waterproof to 2 meters – and floats. • 300 lumens for up to 5 hours (High), up to 25 lumens for up to 50 hours (Low), and up to 35 hours • Lithium ion battery fully recharges in 4 hours and is rechargeable up to 800 times

Cree XM-L LED Provides Outstanding Crisp Light • Impact/Drop Tested to 1.5 meters• Dual Switch Offers Single Hand Operation• IP x 8 Waterproof Tested for 4 Hours @ 2 meter depth Batteries not included

Waypoint Lithium Ion Rechargeable Spotlights

Stinger Light Pipe Kits and Accessories

Item # Item Max Lum Sale

TLXTLF-TT-1 TT1 250 $104.59

TLXTLF-TT-2 TT2 115 $81.01

TLXTLF-TT-3 TT3 250 $107.67

TLXTLF-TT-4 TT4 520 $112.80

TLXTLF-TT-5 TT5 650 $137.42


SG75650 Without charger (NiCd) $112.27

SG75651 Without charger (NiMH) $112.27

SG75654 AC/DC - 1 PiggyBack Holder (NiCd) $171.70

SG75684 AC/DC - 2 Holders (NiCd) $158.48

SG75685 AC/DC - 2 Holders (NiMH) $158.48

SG75951 Lite Pipe Accessory Kit $47.69


PolyStinger LED. Impervious to shock with a 50,000 hour lifetime Runtime: High brightness: Up to 1.75 continuous hours to the 10% output level; Medium brightness: Up to 3.50 continuous hours to the 10% output level; Low brightness: Up to 6.75 continuous hours to the 10% output level; Strobe: Up to 5.50 continuous hours. Up to 18,000 candela (peak beam intensity) and up to 140 lumens measured system output. Length: 8.41”

SG75612 Anodized Red LED Piggyback Stinger AC/DC Kit $183.81

SG75613 Anodized Blue LED Piggyback Stinger AC/DC Kit $183.81

SG75636 Stinger LED Lime Green body with AC/DC with PiggyBack Holder $183.81SG75642 Orange LED Piggyback Stinger AC/DC Kit $183.81SG75645 Orange DS LED Piggyback Stinger AC/DC Kit $192.88

SG76110 PolyStinger LED (WITHOUT CHARGER)- Black $118.86

SG76113 PolyStinger LED with 120V AC/DC 2 Holders - Black $165.09

SG76116 PolyStinger LED with 120V AC/DC Fast Charger - 1 PiggyBack.Black $197.28

SG76132 PolyStinger LED with 120V AC/DC 1 PiggyBack Holder - Black $178.30

SG76135 PolyStinger LED with 120V AC/DC 2 holders - Black $193.16

SG76160 PolyStinger LED (WITHOUT CHARGER) - Yellow $118.86

SG76163 PolyStinger LED with 120V AC/DC 2 Holders - Yellow $165.09

SG76166 PolyStinger LED with 120V AC/DC Fast Charger - 1 PiggyBack. Yellow $197.28

SG76182 PolyStinger LED with 120V AC/DC 1 PiggyBack Holder - Yellow $178.30

SG76185 PolyStinger LED with 120V AC/DC 2 holders - Yellow $193.16

The Stinger DS® LED is the only rechargeable flashlight with a fully independent dual switch. Now with C4 LED Technology. DUAL SWITCH TECHNOLOGY – Access any of the three variable lighting modes and strobe via the tail cap or the head-mounted switch. The combination of a rechargeable battery and a lifetime super high flux LED results in the lowest operating cost of any flashlight made.

SG76810 PolyStinger DS LED (WITHOUT CHARGER)- Black $132.07

SG76813 PolyStinger DS LED with 120V AC/DC 2 Holders - Black $177.48

SG76816 PolyStinger DS LED with 120V AC/DC 1 Fast Charger PiggyBack Holder - Black $209.66

SG76832 PolyStinger DS LED with 120V AC/DC 1 PiggyBack Holder. Black $192.33

SG76833 PolyStinger DS LED with 120V AC PiggyBack Holder - Black $187.38

SG76835 PolyStinger DS LED with 120V AC/DC Fast Charger - 2 holders. Black $205.54

Anodized Stinger Steel DS PiggyBack Flashlights

SG75816 Stinger DS Standard. 1 LED bulb, removeable anti-roll ring, AC charge cord, DC charge cord, 1 Piggyback charging bracket $208.52

SG75832 Stinger DS with Fast Charge Technology. 1 LED bulb, removeable anti-roll ring, AC charge cord, DC charge cord, 1 Piggyback charging bracket $196.17

SG75616 Anodized Red LED DS (Dual Switch) Piggyback Stinger AC/DC Kit $192.88

SG75617 Anodized Blue LED DS (Dual Switch) Piggyback Stinger AC/DC Kit $192.88

SG75638 Stinger DS LED Lime Green body with AC/ DC PiggyBack $192.88

Features Three variable Lighting Modes and Strobe Light Effect via the Tail Cap or the Head-mounted Switch

Tactical Flashlights

C4® LED technology, impervious to shock with a 50,000 hour lifetime. • Long-range targeting beam with optimum peripheral illumination • 3 lighting modes: High, low, emergency signal • Runtime using 4 “C” batteries: High: 8.5 hours, Low/signal: 120 hours, unlimited run time when using 12V DC power cord

Item # LED Run Time Recharge Spot Price

BYSLR-2134 30 2/16 hr 8 hr Yes $49.47

BYSLR-2166 60 2/18 hr 8 hr Yes $58.46

Broad beam floodlight fits into tight places with a soft-beam flashlight for close-in illumination. 35,000 hour LED life. Internal NiMH battery pack is earth friendly with no recharge memory limitations. AC & DC charging adapters included. Removable magnetic hook for hanging vertical or horizontal.

Item # Color Sale

SG44900 Yellow $84.20SG44902 Black $84.20

WayPoint Pistol Grip C4 Spot Lights

TLXTLF-TT-1

TLXTLF-TT-5

Item # Color Price

SG44910 Yellow $168.38

SG44911 Black $168.38

• Ultra-thin design fits into tight spaces• Removable, rotatable hang-hook allows you to use it as a drop light• High-impact, 9” (22.86 cm) light bar constructed of unbreakable polycarbonate with scratch-resistant coating


123



SPECIALTY LIGHTS

When you need maximum illumination with a wide beam to search a large area the Strion and Stinger LED HL rechargeables are the ticket! Each have three modes of light and feature a wide dispersion of light embedded into its direct beam for distance.• Strion HL Hit 500 lumens with 200 meters of beam distance • Stinger HL Hit 640 lumens with 297 meters of beam distance.


SG74750 Light and Battery $125.88

SG74751 120V AC/12V DC-1 holder $180.10

SG74752 120V AC/12V DC-2 holders $208.62

SG74753 120V AC $175.25

SG74755 120V AC/DC-1 holder Displ Pk $180.10


SG75429 Light with battery $139.43

SG75430 120V AC/12V DC-2 holders $193.65

SG75431 120V AC $171.38

SG75433 120V AC/12V DC-FC 2 holders $220.90

SG75434 120V AC/12V DC-1 PiggyBack $203.92

SG75453 Dual Switch without Charger $154.93

SG75454 Dual Switch 120V AC/12V DC-2 holders $202.98

SG75455 Dual Switch120V AC $186.88

SG75457 Dual Switch 120V AC/12V DC-FC 2 holders $235.06

SG75458 Dual Switch 120V AC/12V DC-PiggyBack $219.96

SG66118 Black $31.27

SG66120 Red $31.27

SG66121 Chrome $31.27

SG66122 Blue $31.27

SG66128 Orange $31.27

SG66129 Lime $31.27

Green LED Stylus Pro

SG66124Realtree Hardwoods High Definition Green Camo

$34.95

SG66125Stylus Pro Pen Light Realtree Hardwoods Blaze

$34.95

A super bright, high flux, 1/2 watt LED. LED has a lifetime of up to 30,000 hours and never needs replaced. Corrosion proof construction with an unbreakable polycarbonate lens and pocket clip. Provides up to 24 lumens for up to 7.5 hours.

Stylus Pro LED Penlights

Rubber Push Button Tail Cap On-Off Switching

New Strion and Stinger HL Rechargeables

Corrosion ProofContruction

EZPCLED

POCKET LED STICK LIGHT• 6 brilliant high power LEDs! • Molded clip to stay in your pocket. • Rugged, made to last.3 AAA batteries

included.• Buy them buy the 6-Pack display

EZPCLED6PK$17.63

EZXL3000

RECHARGEABLE CORDLESS 30 LED EXTREME SHOP LIGHT• This Cordless LED trouble light offers 10-hour cordless use between

charging.• 30 super-bright 100,000-hour LEDs.• Battery pack that has 1,000 charge

cycles.

$88.41

UV413310

LED SINGLE STRIP CORDLESS FREEDOM LIGHT• Single Strip LED technology provides no

shadows or hotspots• 3 hours of full light output per charge• Emits over 330 lumens of brilliant

white light (equivalent to a 75 watt incandescent bulb)

$102.56

Item # LED Lumens Sale

BYNSR-2482 30 60 $51.72

BYNSR-2492 60 120 $56.21

LED Lights feature dual mode use with floodlight or Side LED functions. Lights use NIMH batteries which allow for fast recharge and extended use.

Dual Mode Rechargable Baton Lights

Strion HL C4Lights

Stinger C4 HL Lights with NIMH Batteries

Produces a floodlight effect as well as directional. Water resistant.

BYSLR-2120

120 LED RECHARGABLE UNDER-HOOD WORK LIGHTRechargeable for complete versatility:

under-hood Illumination, vehicle interior Illumination, or shop and roadside repair.

• Magnets on Both Ends, Two Lights in One• Full or half power lighting• Chemical / moisture / impact resistant

housing• Magnetic or hanger-hook mounting• Adjustable carrier extends 77 inches• Use with or without carrier

$146.15

JS98639

TWIN TUBE 36 LED WORK LIGHT220 lumens of light output• LED tubes open 90º center-to-side and rotates 360º• 8 hours on 18LED, 4 hours run time on 36LED• Low battery level indicator, Li-ion rechargeable

battery$67.45 EZXL304PK

4 PACK OF LED WORK LIGHTSIncludes 4 fluorescent colors:Green, Orange, Blue and Yellow!• New wide angle LED technology with 174 Lumens.• Up to 10 hour run time.• Includes 4 magnetic clips for expanded hands

free use. • Includes (4) 120V Chargers, (4) Magnetic Clips

$331.54

NE64805A

77 LED DUALIGHT II• Spot light with 17 powerful LED’s in the end lens,

and 60 bright LEDs along the body. • Three position switch; (1) off; (2) flood; (3) spot • 4 hours flood feature and 10 hours spot feature-

all on a single charge!

$50.55

124




FLASHLIGHTS & HEADLAMPS

TLXTLF-1C1AA

LIGHTSTAR 100 LUMEN LED• 3 modes: high (100 lumens), low (50 lumens),

strobe (100 lumens)• Beam pattern: smaller spill than other lights,

bright “hot spot” in the center$31.63

SG66318

STYLUS MICROSTREAM• Rubber push button tail cap switch,

Unbreakable pocket clip, Key ring, and safety lanyard included

• Super-bright 1/2 watt, 30,000 hour high flux LED • MicroStream - up to 20 lumens; up to 1.5 hrs• O-ring sealed, Corrosion and water proof

construction$25.76

BYNSP-2208

ADJUSTABLE HEADBAND MULTI LIGHT• Selectable light control, Adjustable tilt &

headband, Light weight • Premium AAA alkaline batteries included• Spot Mode: 4 LED • 8 L • 48 hrs • Floodlight Mode: 4 LED • 8 L • 48 hrs • Dual Mode: 8 L 8 LED • 16 L • 28 hrs

$17.96

BYNSP-2212

ADJUSTABLE HEADBAND MULTI LIGHT• Selectable light control, Adjustable tilt &

headband, Light weight • Premium AAA alkaline batteries included• Spot Mode: 1 LED • 65 L • 18 hrs• Floodlight Mode: 12 LED • 24 L • 18 hrs• Dual Mode: 13 LED • 89 L • 10 hrs

$25.87

BYNSP-2232

NIGHTSTICK DUAL-MODE 13 LED HEADLAMP• Selectable Light Control- SPOT Mode, Flood

Mode, Full Mode• Comfortable non-slip adjustable band.• Premium AAA Alkaline Batteries Included

$25.87

ULRT-2LT

ROTATING MAGNETIC WORK LIGHTSturdy aluminum housing with24 high intensity LED Lights.• Aluminum lighted head rotates to adjust beam

to needed angle.• Strong magnetic base attaches to any ferrous

metal surface in seconds• Bridges a work light with a high quality flashlight• Comes with three AAA batteries

$24.68

SG61070

BUCKMASTER CAMO HEADLAMP• Features 3 modes of lighting:• 3 Night Vision Green LED’s, 1 LED, 1 Xenon Bulb• Water-resistant lightweight thermoplastic

Realtree Hardwoods Green High Definition (HD) camoflauge patttern

• Up to 150 hour run time on 1 LED• 90 degree tilting head

$36.92

CG114303

HEMI PLUS LED CORDLESS LI-ION LIGHTMore Light than a 75 Watt Bulb,and More Than 8 Hours Run Time • 100,000 Hours LED Life • Lithium Ion 8800 battery • Less than 3 hours to recharge

$144.41

SG61051

TRIDENT MULTI BULB HEAD-LAMP WITH LED’S AND ZENON BULBSTrident is the perfect headlamp for multi-use situations. It is the matchless combination of a high powered xenon bulb and three 100,000 hour LED’s.Trident is the perfect headlamp for multi-use situations.It has the matchless combination of a high powered xenon bulb and three 100,000 hour LED’s

$$32.62

SG61052

SEPTOR 7 LED ULTRA HEAD-LAMP FLASHLIGHT

Light Star 300 Lumen LED Flashlights

Tilting head (90° range) puts light where you need it.Seven bright white LEDs last for thousands of hours.• Three light levels: 1 LED, or 3LEDs, or all 7 LEDs.• Battery life: 120 hrs (1 LED), 40 hrs (3), 18 hrs (7).• Polymer case, rubber bezel, polycarbonate lens.

$43.77

Item # Color Price

TLXTLF-802AAA-BK Grey $26.35

TLXTLF-802AAA-BL Blue $26.35

TLXTLF-802AAA-BLK Black $26.35

TLXTLF-802AAA-OR Orange $26.35

TLXTLF-802AAA-RD Red $26.35

TLXTLF-802AAA-SV Silver $26.35

Item # Color Price

TLXTLF-3002AA-BK Grey $48.33

TLXTLF-3002AA-BL Blue $48.33

TLXTLF-3002AA-OR Orange $48.33

TLXTLF-3002AA-SV Silver $48.33

• Rugged, momentary forward-click switch • A rubber BiteGrip allows your hands to be free. A high CRI

LED enhances ambient colors. 5 hour runtime, 5” long • Comes with 2AAA alkaline batteries and high tension,

reversible pocket clip

LightStar 80 Pen Lights

TLXTLF-TC2AA-RD

HI CRI LED POCKET FLASHLIGHT• Dual mode 185 / 75 lumen output• Approximate runtimes -3 hours on high, 24 +

hours on low. Recessed tail cap switch• Technician preferred wide spill beam pattern• Aircraft grade anodized aluminum body• Includes 2 AA alkaline batteries, pocket clip and

attached wrist strap. O-ring sealed

$38.44

TLXTLF-3C2AA

LIGHTSTAR 180 LUMEN LEDTactical light. Momentary switch, tight beam, and

black anodizing. • Beam pattern: medium spill with bright “hot

spot” in center - 6” long• Comes with 2AA alkaline batteries, nylon holster,

pocket clip, and attached wrist strap

$33.38

TLXTLF-3C2AAEX

LIGHTSTAR 220 LUMEN LEDDual mode 220/100 lumen output• Approximate runtimes: 3.5 hours on high 26

hours on low • Comes with 2AA alkaline batteries, nylon holster,

pocket clip, and attached wrist strap• Click on/off, tap button to switch modes

$43.93

Dual mode 300/100 lumen output• Approximate runtimes: 3 hours on high, 24 hours on low• Wide spill beam with broad “hot spot” in the center• Comes with 2AA alkaline batteries, pocket clip, andattached wrist strap - 6” Long


125



FLASHLIGHTS & HEADLAMPS LIGHTS AND CORDLESS ACCESSORIES

HA3018005

29 PIECE BLACKAND GOLD DRILL BIT SET• Oxide treatment resists corrosion. Flatted shanks

above 11/64” eliminates slippage in drill chuck

• Reduced shank above 3/8” allows the use of larger drill bits in a 3/8” chuck

• Sizes include 1/16” to 1/2” in 1/64”

$94.92

HA3018006B

TURBOMAX 29 PIECE DRILL SET• Revolutionary JetPoint tip design stays sharp longer• Tip is self-centering• Sizes 1/16 - 1/2” Reduced Shank.

$130.06

DD350X

DRILL DOCTOR 350X SHARPENER• Sharpens 3/32-1/2” standard-twist steel,

masonry, carbide, and TiN-Coated bits• Replaceable diamond sharpening wheel

$86.11

DD500X

DRILL DOCTOR 500X SHARPENER• Easy, front-loading chuck• Sharpens 3/32-1/2” standard-twist bits• Sharpens high-speed, steel, masonry, carbide,

and TiN-Coated bits

$166.54

DD750X

DRILL DOCTOR 750X SHARPENER• Sharpens 3/32-3/4” standard-twist bits• Sharpens high-speed, steel, masonry, carbide,

and TiN-Coated bits• Replaceable diamond sharpening wheel

$199.36

TN16148

148 PIECE MASTER BIT SET• Assortment of the most

popular, and hard to find bits for many different applicatons

• Contains Phillips, slotted, square drive, Torx(r), Pozi-drive, inch and metric Hex, tamper resistant Torx(r), tamper resistant hex, clutch drive, spline drive, spanner, three wing and four wing drives

• 3-1/2” Magnetic bit holder, Quick-release bit holder, 1/4” drive socket adaptor

$60.48

HA3018002

29 PIECE COBALT DRILL BIT SET M35 HARDNESSCobalt steel extendscutting edge life andmaintains cutting life afterresharpening • Extra hard drill for greater

wear, 135° split point tip starts on contact, cuts with less force

• Tap & Drill selection chart for convenient reference.

• Sizes include 1/16” to 1/2” in 1/64” increments

$156.33

PMW1389

100 PIECE MASTER BIT SETUse with screwdrivers, electric drills or socket wrenches • Includes: Bit adapters,

Magnetic bit holder, “Y” style bits, Phillips, Pozi-drive, Square, Slotted, Spanner, Star, Tamper resistant star & hex, Tri-wing, metric & SAE hex, Clutch head and spine bits

$13.02

TN16503

3 PIECE STEP DRILL SET

Tactical Rail Mount Gun Lights

Power Tool Accessory Kits

• Fully ground with titanium finish to easily drill multiple sizes with one bit

• 13 hole size

AO9445

TITANIUM STEP DRILL BIT SET (1/8” - 1/2” , 3/16” - 1/2”, 1/4” - 3/4”)• All drill bits have a ¼” shank• 13 Hole Sizes from 1/8” to 1/2” and 1/32” increments• 6 Hole Sizes from 3/16” to 1/2” and 1/16” increments• 9 Hole Sizes from 1/4” to 3/4” and 1/16”

increments$18.67

$24.37

Item # Pic Description Price

SG69220 A TLR-3 C4 LED Spot $122.23

SG69230 B TLR-2 with Laser & Strobe $441.79

SG69240 C TLR-4 with integrated aiming laser $194.65

OT4794

SAFETY WIRE DRILL GUIDE SET SAE & METRIC SETThe Perfect way to drill those nuts and bolts for

use with safety wire without breaking the drill bit. • Guide, align, and support the hex head• Fits nuts and bolt heads up to 1 1/2”.• SAE fixture bar is threaded for 1/4”-20, 5/16”-18,

5/16”-24, 3/8”-18, 3/8”-24, 7/16”-14 bolts, • Metric fixture bar covers M6x1.0mm, M8x1.0,

M8x1.25mm, M10x1.25mm, M10x1.5mm, M12x1.5mm sizes.

$72.64

• Easily mounts to gun rails using key lock features• Light weight and compact• C4 LED for bright spot and concentrated beam• Water resistant for an extended period of time• Uses lithium batteries

A CB

AO6360

LI-ION CORDLESS 60 LED WORK LIGHT• 60 super bright LED’s maintains nearly the same

light intensity for the entire discharge cycle• Single charge provides approximately 4 hours of

continuous use• High light output with low energy consumption• Switch operated indicator lights (green, yellow &

red) allows user to know current battery state

$71.82

The TLR-1 Game Spotter is a green LED long-range, rail-mounted, game-tracking light with a 350 meter beam!• Deep-dish parabolic reflector preserves night vision and won’t spook varmints• Mounts directly to all MIL-STD-1913 (Picatinny) rails and weapons with Glock-style rails, keys included for other mounts.

Built for maximum durability and long life with impact drivers.• Forged bit (vs. milled) for superior fitment, which reduces stripping and increases life of bit 3X.*• Black oxide finish resists corrosion and increases life of bit.


SG69227 Standard $180.16

SG69228 Remote Switch $257.12

Rail Mount TLR-1 Green LED Hunting Spotters


HA1840320 16 Piece Basic $56.23

HA1840391 34 Piece Complete $89.89

126




PLIERS, SNIPS AND FILES

VG1078TRAY

10 COMPREHENSIvE vISE GRIP SET IN TOOL BOX STORAGE TRAY• Includes 10R®,10WR®, 7R®, 7WR®, 7LW®,

5WR®, 6LN®, 9LN®, 6R® and 11R® in an easy to organize tray.

$138.61

IRWIN SNIPS


HA2073111 Compound Leverage Left & Straight Aviation Snip $19.08

HA2073112 Aviation Snip, Compound Leverage Cuts Right & Straight $19.08

HA2073113 Aviation Snip, Compound Leverage, Cuts Straight & Wide Curves $19.08

HA2073115 Bulldog Snip, Compound Leverage, Notch & Trim $18.15

HA2073211 Sl Offset Snip, Cuts Straight & Angles Or Curves Left $21.35

HA2073212 Sr Offset Snip, Cuts Straight & Angles Or Curves Right $21.35

KD82820

4 PIECE FILE SET• Set includes 8” Flat, Round, Half Round, and

Triangle File• Dual material cushion grip handles for added

comfort and leverage• Comes complete in a storage tray

$74.79

KD82821

6 PIECE MINI FILES SET• Set includes 4” Flat,

Half Round, Round, Triangle, Square, and Knife File

$46.75

VG2077704

5 PIECE LOCKING PLIERS SET IN A CANvAS TOOL TOTE BAG• Each pliers designed to replace up to 16 wrench sizes• Constructed of high-grade heat-treated alloy

steel for maximum toughness and durability • Guarded release trigger quickly unlocks and

protects from accidental release• Includes: 10WR, 10R, 7CR, 6LN & 5WR

$68.64

VG2078710

3 PIECE GROOvE-LOCK PLIERS SET• Includes (1) each of an 8”,

10” and 12” GrooveLock pliers. These pliers adjust 50% faster and have twice the groove positions of standard groove joint pliers.

$63.96

TN17067

13 PIECE MINI UNI-HANDLE FILE SET• 12 high strength carbon steel files• Ergonomic interchangeable handle with quick relesase• Durable nylon pouch• Includes Flat, Triangle, Flat-Point, Knife-Type,

Square, Barette$47.60

Item # Size Sale

VG05T 10” $16.81

VG07T 7” $16.55

VG09T 5” $16.11

Fast Release is 2x easier to open, has ano-pinch release and offers more finger room• Wide-opening jaws provide greater versatility in clamping a variety of shapes• Turn screw to adjust pressure and fit work

Fast Release Pliers

VG1799145

3 PIECE LONG REACH PLIERS SET

Metal Cleaning and Deburring

• Superior long reach for working in tight or confined areas -Machined jawed teeth for maximum gripping strength

• 11” Needle Nose Pliers• 11” 45 degree Bent Nose Pliers • 11” 90 degree Bent Nose Pliers

$55.21

FOW72-483-777

4 PIECE DEBURRING CUTTER SET• Colored sleeves rotate to lock and unlock

blades for easy changing. • Rounded head blades for safe deburring• Curved blades swivel freely

$20.12

FOW72-483-888

UNIvERSAL CLEANING DEBURRING SET• 1 Universal Handle, 2 Adapters, 2 Deburring

Blades • 1 Countersink for 20mm/.47” diameter. • 1 Countersink for 30mm/1.18” diameter.

$45.93

SK17836

5 PIECE SUPER CAPACITY PLIERS SETMost popular pliers used in automotive repair

applications • 8” Heavy Duty Angled Diagonal Pliers, 11” Extra

Long• Duckbill Pliers, 8” Combination Slip Joint Pliers, 12

1/2” Wide• Capacity Tongue and Groove Pliers, 10 1/2”

V-Jaw Tongue and Groove Pliers. • Made in the USA, Lifetime warranty

$138.32

127




SPECIALTY AND LOCKING PLIERS


CL412 6.5” V Jaw Touge and Groove Pliers $15.45

CLGL10 9.5” GripLock PermaLock Pliers with offset head $14.95

CLGL12 12” GripLock PermaLock Pliers with offset head $20.07

CLGL6 6” GripLock PermaLock Pliers with offset head $13.63

CL3017G 8” Long Nose without cutter $21.17

CL317G 7.5” Long Nose with Cutter $24.80

CL318G 8-3/8” Long Nose w/Cutter $30.11

CL326G 6” Long Nose w/Cutter $24.16

CL337G 7” Lap Joint Diagonal Cutter $22.32

CL349G 9” Inch Linesman Plier Round Nose $65.95

CL356G 6.25” End Cutter Pliers $30.52

CL357G 7” End Cutter Pliers $25.83

CL358G 8” End Cutter Pliers $34.50

CL410G 9.5” Nutbuster Water Pump $21.85

CL414G 14” Nutbuster Water Pump $33.19

CL420G 9.5” Tongue and Groove $19.12

CL422G 9.5” Curved Tongue & Groove Water Pump $18.64

CL424G 4.5” Tongue Groove and Water Pump $18.33

CL426G 6.5” Tongue Groove & Water Pump $15.85

CL430G 10” Tongue Groove and Water Pump $19.89

CL442G 12” Curved Tongue & Groove $23.75

CL444 12” S Cam Air Brake Water Pump Style $23.82

Straight Jaw

VG7R 7” $15.03

VG10R 10” $15.30

Curved Jaw

VG7CR 7” $15.03

VG10CR 10” $13.76

Curved Jaw with Wire Cutter

VG4WR 4” $13.10

VG5WR 5” $14.64

VG10WR 10” $15.30

Long Nose

VG6LN 6” $15.76

VG9LN 9” $18.90

Lobster Claw Jaw

VG12LC 12” $21.60

Chain Pliers

VG20R 9” $33.65

VG4WR, VG5WR VG7WR, VG10WR

VG7CR, VG10CRVG7R, VG10R

VG4LN, VG6LN, VG9LN

VG20RVG12LC

CL317G

CL718G

CL483G

CL440G CL460G

CL449CL447G

CL911G


CL447G 7-3/4” Curved Diagonal Cutters $26.77

CL449 9.5” High Leverage Cutting Pliers $30.42

CL460G 16” Curved Water Pump $32.77

CL463G 16” V Jaw Water Pump $36.54

CL480G 20-1/4” Water Pump $64.17

CL483G 20” V-Jaw Water Pump $67.04

CL516G 6” Thin Nose Slip Joint with Wire Shear $19.47

CL526G 6” Thin Nose Slip Joint with Wire Shear $12.90

CL528G 8” Slip Shear Type Joint $13.27

CL537G 7” Slip Joint with Side Cutter $33.19

CL5410G 10” Slip Joint with Wire Shear $20.88

CL546G 6” Slip Joint Wire Shear $18.55

CL548G 8” Slip Joint Wire Shear $21.19

CL558G 8” Slip Joint Style Hose Clamp Pliers $24.02

CL718G 8” Duck Nose Long Reach $21.95

CL728G 7.5” Long Reach Pliers with Diagnol Cutter $34.22

CL748G 8”Long Reach with End Cutter $28.39

CL758 7.5” Flush Cutting Long Reach Plier $35.79

CL908G 8.25” Multi Wire Tool & Cutter $21.50

CL909G 9-3/4” Crimp and Cut Tool 10 to 22 AWG. $25.60

CL911G 9-1/2” Cable Cutter $31.07

CL958G 6” Copper Wire Stripper $17.08

CL959G 8.5” Crimper/Wire Stripper $27.02

CL317G

CL349G

CL356G

CL357G

CL358G

CL414G

CL5410G

CL546G

CL548G

CL558

CL718G

CL728G

CL748GCLTR-1

5 PIECE PLIERS SETIncludes the five most used pliers across all repair

industries• Made in USA set Includes: 317, 420, 447, 526, 909

$102.98

CL7449

Original Locking Pliers

OT6627

3 PIECE GRIP WRENCH SET• Use with 5/8” – 18 UNF threaded slide hammer

and the three most common size locking pliers grip wrenches

• Simply remove the adjusting screw from the wrench and replace with adapter – then thread onto the slide hammer shank.

$63.32

CL908G

CL758

CL958G

CL959G

CL909G

CL420G to CL480G

CL516GCL526G

CL463G & CL483G

128




SPECIALTY PLIERS

SU3705

3 PIECE 16” HOSEGRIP PLIERS SET• Includes 5/16”, 1/2”, and 3/4” Hose Gripper Pliers

$65.65

Item # Description SaleVG2078108 8” Groovelock

Pliers$17.76

VG2078110 10” Groovelock Pliers

$21.32


$25.56


$48.99


$65.36

VG2078208 8” North American Linemans Pliers

$16.40

VG2078209 9.5 “ North American Linemans Pliers

$19.01

VG2078216 6” Long Nose Pliers $14.44

VG2078218 8” Long Nose Pliers $16.40

VG2078226 6” Bent Long Nose Pliers

$15.74

VG2078228 8” Bent Long Nose Pliers

$17.69

VG2078300 8” Self-adjusting Wire Stripper W/protouch Grips

$30.26

VG2078305 5” Wire Stripper/cutter

$7.85

VG2078306 6” Diagonal Cutting Pliers

$14.44


$16.40


$19.01

VG2078309 8” Multi Tool Stripper/cutter/crimper W/protouch Grips

$16.81

VG2078310 10” Crimper (Forged) W/protouch Grips

$24.66

VG2078316 6” Wire Stripper/cutter W/protouch™ Grips

$12.51

VG2078317 7” Multi Tool Stripper/cutter/crimper W/protouch Grips

$14.29

VG2078318 8” End Cutting Pliers

$20.31

VG2078328 8” Cable Cutting Pliers

$21.65

VG2078406 6” Slip Joint Pliers $7.21

VG2078408 8” Slip Joint Pliers $8.53

VG2078500 10” Groove Joint Pliers - Smooth Jaw

$13.01

VG2078506 6” Groove Joint Pliers

$8.26

VG2078712 8 Piece Groovelock Propliers Set

$128.78

VG2078714 8 Piece Mini Propliers Set In Case

$121.89

PROTOUCH™ GRIPS PROVIDE EXTRA COMFORT AND REDUCES HAND FATIGUE

VG2078208

VG2078209

VG2078116

VG2078112

VG2078110

VG2078318

VG2078108

VG2078120

VG2078226

VG2078218

VG2078714

VG2078216

VG2078309

VG2078316

VG2078317

VG2078300

VG2078307

VG2078306

VG2078228

VG2078712

SU3600

• Includes SU3601 90°, SU3602 45° SU3603 Straight SU3604 Curved

$57.10

SU3703

3 PIECE 11” GRIPPERPLIERS SET• Includes 5/16”, 1/2”, and

3/4” Hose Gripper Pliers$40.37

SU3704

• 11” Long Cutting, Includes 90° Long Reach Diagonal Cutting Pliers, Slip Joint Hose Gripper Pliers 3/8” to 3/4”, and Slip Joint Hose Gripper Pliers 3/4” to 1-1/4”

$58.13

3 PIECE 11” SPECIALTYPLIERS SET

4 PIECE 11” NEEDLENOSE PLIERS SET

OT5912

ANGLED CRIMPER• Tips are angled to reach awkward places, such

as long firewall or under dash.• Ergonomic and easy to use. Simply hold

connector in crimper, place over wire, and squeeze the handles.

• Custom grip handles cushion your hand.• Get a quality crimp every time.

$47.74

OT4795

SAFETY WIRE TWIST PLIERS8” pliers will reliably twist safety wire rapidly and

consistently. • The right hand twist mechanism features an

automatic spring return.$36.31

129




SPECIALTY AND SNAP RING PLIERS

AO9401

8 PIECE SNAPRING PLIERS SET• For internal and external rings,• Comfortable insulated vinyl handles• 5 1/2” to 9” straight & bent .038’ to .090” tip

1ea. - 5” Hook Tool and pick tool$32.00

AO9402

2 PIECE INTERNAL/EXTERNAL LONG SNAP RING PLIERS SET• Replaceable points & spring ratchet locking mechanism• Tip Diameter: 0.12”• Int. = 3-1/16” - 6-1/4” Ext. 3-1/2” - 6-1/2”• Spread: 3-1/4”, Length 16”,

$48.70

OT4512

8 PIECE SNAP RINGPLIERS SET INTERNAL/EXTERNAL• Contents of Set: .090” tip - straight & 90°

pliers; .070” tip - straight & 90° pliers; .047” tip - straight & 90° pliers; .038” tip - straight & 90° pliers; Straight tip pick; 90° tip pick

$87.03

Item # Description Sale VG2078508 8” Groove Joint Pliers $11.14

VG2078510 10” Groove Joint Pliers $13.78



VG2078606 6” Adjustable Wrench $12.40




VG2078615 15” Standard Adjustable Wrench $44.84

VG2078618 18” Standard Adjustable Wrench $78.46

VG2078706 4 Piece Adjustable Wrench Set $67.25

VG2078708 5 Piece Propliers Kitbag Set $69.49

VG2078904 4-1/4” End Nipper With Spring $13.32

VG2078905 5-1/4” Long Nose Plier With Cutter And Spring

$15.54

VG2078915 4-3/4” Lineman’s Plier With Spring $15.54

VG2078708 5 Piece Propliers Kitbag Set $69.49

VG2078712 8 Piece Groovelock Propliers Set $128.78

VG2078714 8 Piece Mini Propliers Set In Case $121.89

VG2078904 4-1/4” End Nipper With Spring $13.32

VG2078905 5-1/4” Long Nose Plier With Cutter And Spring

$15.54

VG2078915 4-3/4” Lineman’s Plier With Spring $15.54

VG2078925 .4-1/2 Flush Diagonal Plier with Spring $16.81

VG2078935 4-1/2” Standard Diagonal Plier With Spring

$15.54

VG2078945 5-1/4” Flat Nose Plier $15.54

VG2078955 5-1/2” Needle Nose Plier $16.81

VG2078965 5” Bent Nose Plier $13.32

VG2078706

VG2078516 VG2078310 VG2078500 VG2078408 VG2078406

VG2078618 VG2078506 VG2078965

VG2078955 VG2078945 VG2078925VG2078606

OT4513

2 PIECE LARGE SIZE SNAP RING PLIERS SET• Internal plier’s capacity 3-1/16” to 6-1/4”

(78mm to 159mm) snap rings.• External plier’s capacity 3-1/2” to 6-1/2”

(89mm to 165mm) snap rings.• Blow-molded storage case includes extra sets

of replaceable 0.12” (3mm) dia. tips: straight, 45°, and 90°.

Designed to close hog ring fasteners used on upholstery on many domestic and import vehicles.

$108.31

Item # Size Jaw Sale

VG4935095 A 8” Straight $17.60

VG4935096 10” Straight $21.32

VG4935097 10” Smooth $21.32

VG4935098 B 12” Straight $24.35

VG4935099 12” Smooth $25.56

VG4935317 6” Smooth $9.19

VG4935318 6” Straight $8.75

VG4935319 C 8” Smooth $11.14

VG4935320 8” Straight $10.62

VG4935321 D 10” Straight $24.24

VG4935322 12” Straight $15.60

VG4935323 E 12” Smooth $16.40

VG4935351 F 6” V-Jaw $14.84

Item # Type Sale

LS61400 Straight $25.52

LS61410 Angle $25.52

D

A B C E F

Press And Slide Button Quickly Adjusts Lower Jaw• More Groove Positions Provide The Optimum Hand Location • Anti-Pinch Design And Protouch Grips With Ratchet Up Design Allows For Quick Adjustments• Comes In Smooth, V-Style, Or Straight Jaw Designs For Specific Custom Types Of Use

Groove Lock Pliers

Hog Ring Pliers

KS3495

12 PIECE SNAP RING PLIERS SET• Includes 12 fixed tip pliers with the following

sizes: .038, .047, .070, and .090 in 0-degree, 45-degree and 90-degree angles.

$122.13

130




SPECIALTY PLIERS

KX8721250

COBRA QUICK SET PLIER• 28 Position adjustment with 2” Jaw Capacity• Automatically slides and locks in the closing

direction• The more you push, the higher the torque hold

$44.79

Item # Size Jaw Style Sale

Cutters and Specialty Pliers

KX2611-8 A Needle 8” Cutter $32.73

KX2621-8 B Bent Needle 8 Cutter $40.51

KX3891-8 C Circle Gripper 8” Hose Grip $42.84

KX7101-200 D Bolt Cutter 8” Cuts 3.6mm -6mm soft wire and alloys $63.06

KX7121200 E Angle Bolt Cutter 8” Cuts 3.6mm -5mm soft wire and alloys $69.35

KX7131-8 F Lever Cutters 8” Cuts up to 6.2mm soft wire with wire holding notch $70.89

KX7401-10 G Hi-Lev Cutter 10” Diagonal style wire cutter $51.12



KX7405-10 F Hi-Lev Cutter 10” 1000V Diagnal style wire cutter $61.11

KX7421-10 H Hi-Lev Cutter 10” Bent Diagonal $52.73

KX7421-8 H Hi-Lev Cutter 8” Bent Diagonal $39.12

KX7491-10 I Hi-Lev Cutter 10” Center Cut $58.36

KX8603-10 J Plier Wrench 10” Water Pump Style $67.10



KX8701-10 K Cobra 10” Water Pump Style $42.48


KX8701125 K Cobra 5” Water Pump Style $37.41





KX8741-10 L Raptor 10” Special Slip Joint .45” to 1.25” Grip $47.08

KX8801-10 M Alligator 10” Water Pump Style $30.99



KX9518-200US N Cable Shears 8” 1000V Cuts soft alloys to 3/4” $62.50

KX9561-712 O Cable Cutter Burr free hard wire cuts to 6mm $59.59

A

KX9K008074US

10” COBRA AND HI-LEV DISCOUNT PLIER PACK• Includes 8701-10 Cobra Style self-gripping

with press button action, and 7401-10 Hi-Lev Cutting Pliers

$85.60

Item # Pic Contents Sale

Cutters, Water Pump, and Specialty Jaw Pliers

KX267487 A 8” Long Nose Plier, 8” Bent Diagonal Cutter and 10” Cobra Plier $108.90

KX267488 B 8” Long Nose Plier, 8” Bent Diagonal Cutter, 10” Alligator Plier $96.43

KX002005S2 C 6 & 10” Straight and 8” angled Hi-Lev Cutters $120.25

KX3X87 D 7”, 10” and 12” Cobra Pliers $126.61

KX3X88 E 7”, 10” and 12” Alligator Pliers $93.46

KX002072V01 F Plier Wrench 8603-5, and Cobra 8701-6 In Belt Pouch $114.79

Get the Highest Expectations in Performance and Ergonomics from these Precision German Crafted Tools

A B C D E F

B C DE

J

KL M

N O

F G H I

Alligator Style-Box joint construction self-gripping on pipes & nuts. Unique jaw design shaped to eliminate nut-burring. 7-position adjustment.Plier Wrench- Smooth parallel jaw water pump style with 10-1 gripping power. Cam action ratcheting system and memory button retains jaw opening for repetitive work. Cobra Style - 11-position, single hand adjustment and self-gripping on pipes and nuts makes using this tool fast and easy.Press button action for fast and firm adjustment directly on the work piece. The unique jaw design shaped to eliminate nut burring.Hi-Lev - Comfort and ergo handle pliers with higher leverage gripping that puts more torque on the cutter

KX7371180

7” DUAL HINGE TWIN FORCE 7” DIAGONAL CUTTER DIPPED HANDLE• Increased cutting power…because of the

twin offset rivets on both sides of the pliers head

• Cuts 50% easier than other diagonal cutters of the same length – even at the tip!

• Cuts steel tape and hard wire with minimal effort for both heavy-duty and fine cutting

$81.93

Item # Size Sale KX7401160 6-1/4” $35.91

KX7401140 5-1/2” $34.81

High Leverage Diagonal CuttersFor very tough, continuous use high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio

131




SPECIALTY WRENCHES AND RETHREADING TOOLS

KS972

SAE/METRICRETHREADER KIT• 7 National Coarse Dies, Sizes: 1/4” - 20, up to

5/8” - 11• 7 SAE Fine Dies, Sizes: 1/4” - 28, up to 5/8” - 18• 6 Metric Dies, Sizes: M6 x 1, up to M12 x 1.75• 6 SAE Coarse Taps, Sizes: 1/4” - 20, up to 9/16” - 12• 6 SAE Fine taps, sizes: 1/4” - 28, up to 9/16” - 18• 6 Metric taps, sizes: M6 x 1,up to M12 x 1.75• One SAE rethread file, 8 sizes Pitch Sizes• One Metric rethread file, 8 Pitch Sizes

$102.75

HA97312

66 PIECE METRICTAP AND DIE COMBINATION SET• Includes metric size taps & dies from 3mm to

24mm, as well as 8 threading tools, and a 16 leaf thread pitch gauge

$524.62

HA3095001

ADJUSTABLE TAP SOCKETS• Jaws adjust to tightly secure taps to ½”• Small profile for use in tight workspaces• 3/8” Square drive compatible with common

ratchets. Knurled ring twists to adjust for quick fit

$28.18

KS971

48 PIECE RETHREADER KIT• 7 SAE Coarse Dies, 7 SAE Fine Dies,

10 Metric Dies, 6 SAE Coarse Taps, 6 SAE Fine Taps, 10 Metric Taps,

• One (1) SAE Rethread File, 8 sizes • One (1) Metric Rethread File, 8 sizes

$110.31

LS70500

8 PIECE TAP A SOCKET TAP HOLDING SET• Fits number & fractional MCTI taps & metric taps

12mm$39.71

Ratchet Drive Tap and Die Sets

Whether creating new threads from raw steel or repairing damaged and worn threads, achieving a precise fit is essential. IRWIN Industrial Tools® sets the standard for delivering quality every step of the way in your threading applications.

Includes Taps and Dies featuring the PTS Die Stock Handle:

• Die Lock - no more set screws needed. Simply twist handle to insert and remove die.

HA1813816

75 PIECE RATCHET DRIVE TAP AND DIE SETMetric and SAE Sizes• Machine screw sizes 4-40 thru 12-24,

Pipe sizes: 1/8” - 27 NPT and 1/8” - 28 BSP Fractional 1/4”-1/2” and Metric 3-12mm

• Includes Tools:16 Leaf Metric Thread Pitch Gauge and 18 Leaf Standard Thread Pitch Gauge

$215.38

HA1813817

116 PIECE RATCHET DRIVE TAP AND DIE SETMetric and SAE Sizes, Drill bits and Extractors• Taps and Dies #4 to #12, 1/4 to 1/2”, 3MM to

12MM, 1/8” 27NPT and 1/8 28BSP tapered pipe taps and dies. Drill Bits 3 - No 43, Letter B - Z, 5/64 - 29/64”. Spiral screw extractors EX-1 to EX-5.

• Metric and SAE thread pitch gage, with mini screwdriver.

$373.56

Self Aligning Tap and Die Sets

HA1840235

41-PIECE MACHINE SCREW, FRACTIONAL & METRIC SELF ALIGNMENT TAP SET• NF/NC Machine threads 4-40NC to 12-24NC,

3-.050mm to 7mm-1. SAE 1/4 -20 to 1/2 - 20• Metric 8-1mm to 12 -1.75mm • 1/8-27 pipe, 1/4 -28bsp• Includes PTS Die Stock, PTS Die Spacer, PTS Adj

Tap Socket - Small No. 4 to 1/4” (3 mm-6 mm), PTS Adj Tap Socket - Medium 1/4” to 1/2” (6 mm - 12 mm), T-Bar for Adj Tap Socket, SAE and

Metric Pitch Gauge

$231.73HA1840237

38-PIECE MACHINE SCREW, FRACTIONAL & METRIC SELF ALIGNMENT DIE SET• NF/NC Machine Screw Die Sizes 4-40 to 12-24,

3m -.050 to 7mm-1.0• Machine Screw SAE/Metric Sizes: 1/4”-20 to

1/2-20, 8m-1 to 12m-1.75• 1/8-27 pipe, 1/4 -28bsp dies• Includes PTS Die Stock, PTS Die Spacer, and

Metric Pitch Gauge

$231.73

HA1841346

40-PIECE MACHINE SCREW & FRACTIONAL SELF ALIGNMENT TAP AND DIE SET• NF/NC sizes Machine Sizes 4 -40 to 12-24, SAE

1/4-20 to 1/2-27, and 1/8-27 NPT• Includes accessories PTS Die Stock,, PTS Die

Spacer, PTS Adj Tap Socket - Small No. 4 to 1/4” (3 mm-6 mm), PTS Adj Tap Socket - Medium 1/4” to 1/2” (6 mm - 12 mm), T-Bar for Adj Tap Socket and SAE Pitch Gauge

$189.56 HA1841350

75-PIECE MACH / FRACTIONAL / METRIC SELF ALIGNMENT TAP AND DIE SET• NF/NC Sizes Machine Screw 4-40 to 12-24• NF/NC SAE and Metric 1/4-20 to1/2-20, 3mm-

.050 to 12mm-1.75• Pipe 1/8-27, 1/8-28BSP• PTS Die Stock - 1” , PTS Die Spacer, PTS Adj Tap

Socket - Small No. 4 to 1/4” (3 mm-6 mm), PTS Adj Tap Socket - Medium 1/4” to 1/2” (6 mm - 12 mm), T-Bar for Adj Tap Socket, and

SAE and Metric Pitch Gauges$318.63HA1841432

116-PIECE MACH /FRACTIONAL / METRIC SELF ALIGNMENT TAP AND DIE SET• NF/NC Machine sizes: 4-40 to 12-24• NF/NC SAE and Metric: 1/4-20 to 1/2-20, 3mm-

.050 to 12mm-1.75• Pipe 1/8-27, 1/8-28BSP, • Spiral extractors EX1 (5/64”) to EX5 (19/64”) • PTS Die Stock - 1”, PTS Die Spacer, PTS Adj Tap

Socket - Small No. 4 to 1/4” (3 mm-6 mm), PTS Adj Tap Socket - Medium 1/4” to 1/2” (6 mm - 12 mm), T-Bar for Adj Tap Socket, SAE and Metric Pitch Gauges

$477.33

SK7412

WIDE MOUTH TRI-GRABBERDesigned for use on round objects like pipes, rods,

hoses, etc. providing three points of contact for a more positive grip on the object than a traditional tongue and groove pliers.

• Wide capacity, ranging from 1/2” -4”

$53.95

Alignment Threading System Creates or Repair Sets includes taps and dies featuring the PTS Die Stock Handle: • Die Lock - no more set screws needed. Simply twist handle to insert and remove.

132




RETHREADING, EXTRACTING AND DRIVING TOOLS

IIMD99-650

MINI-DUCTOR™ COIL KITThe Mini-Ductor Coil Kit contains all the needed accessories to aid in the removal of frozen fastners due to locking compounds, rust, or fusion of parts due to heat up to 1 1/2” in size.

$175.38

IIMD-700

MINI DUCT IIHEATEDEXTRACTOR KITRemove Frozen, Rusted, or Thread Lock

Compound Nuts Without the Collateral Damage from a Flame.

• Without the danger of an open flame, you will be able to heat metallic objects near plastic splash shields or other plastic components without damage to incidental objects arount the treated area.

$645.09

Preformed Replacement Coils and Specialty Coils for Mini-DuctorsItem Coil Type Price

IIMD99-601 Nut-Z Off Coil $21.14

IIMD99-602 U-Form Coil 23” Long $16.17

IIMD99-603 Bearing Buddy Coil $42.25

IIMD99-604 Mini Pad $98.18

IIMD99-605 3/4”x 11” $23.01

IIMD99-607 1 3/4” x 7.5” $27.34

IIMD99-608 1 1/2” x 7.5” $27.34

IIMD99-609 1 1/4” x 7.5” $23.62

IIMD99-610 1” x 7.5” $25.49

IIMD99-611 3/4” x 7.5” $21.14

IIMD99-620 3/4” x 13.25” $24.85

IIMD99-621 7/8” x 13.25” $48.52

IIMD99-622 1” x 13.25” $56.80

IIMD99-623 1-1/4” x 13.25” $57.99

IIMD99-624 1-1/2” x 13.25” $53.25

IIMD99-625 1-3/4” x 13.25” $61.54

OT4383

HOLE PUNCH KIT

• Will pierce up to 14 gauge steel. Also works excellent on gasket, leather, and a variety of other materials• 7 sets of punches & dies. Sizes: 3/32”, 1/8”,

5/32”, 3/16”, 7/32”, 1/4”, & 9/32”.$59.14

HA11135

35 PIECE MASTER SCREW EXTRACTOR SET WITH COBALT BITS• Six Spiral Screw Extractors (Ex-1-Ex-6) Thirteen

Sizes of Multi-Spline Screw Extractors (1/8”-1/2”) Sixteen Sizes of Left Hand Cobalt Drill Bits (5/64”-1/2”) Includes categorizing plastic storage case

$165.68

HA11119

10 PIECE SCREW EXTRACTOR SET WITH COBALT LEFT HAND DRILL BITS• Includes 5 fluted screw extractors (sizes EX-1 thru

EX-5) with 5 corresponding LEFT-HAND Cobalt Drill Bits in metal index/case

$50.84

HA53227

25 PIECE MULTI SPLINE SCREW EXTRACTOR SET• Includes: 1/8” through 7/8” in 1/32” increments

$75.74

WTN18001

TAP EXTRACTORS 3/16-1/2• Remove broken taps and save the threads!

Remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts.

• The hardened steel fingers fit in the flutes of a broken tap to back it out simply and safely.

$107.49

TN16014

3 PIECE DAMAGEDSCREW REMOVER SET

SPECIALTY FOLDING BALL HEX KEY SETS

$10.40

HA54113

13 PIECE BOLT EXTRACTOR SETRemoves damaged fastener sizes between: 8 -

19mm, (1/4” - 3/4”)

$130.18

HA3101010

48 PIECE MASTER EXTRACTOR KITRemove nuts, bolts, studs that are rounded off,

rusted, painted over. 6 Spiral Flute Extractors• 13 Multi-Spline Extractors• 13 Bolt Extractors• 16 Left-Hand Cobalt Drill Bits • 5/64” thru1/2”

$310.77

GY2300K

12 PIECE STRIPPED NUT REMOVER KITSolve the problem of removing rounded,

damaged or corroded hex nuts. • Tapered left–handed threads grips straight nuts

or tapered lug nuts. • Also, for removing automobile wheel locks when

the key is not available.• Includes Sockets #5 (1/2’’, 13mm) to #18

(1–1/16’’, 27mm). • Use with a 1/2’’ drive impact tool. Overall length:

1–1/2’’$235.00

Mini-Ductors Are The Flameless Solution To Releasing Hardware And Other Metallic Components From

Corrosion And Thread Lock Compounds Without The Collateral Damage Normally Associated With Torches.

HA53228

15 PIECE MULTI SPLINE SCREW EXTRACTOR SET• 1/8—9/16”

$48.84

• Removes virtually all damaged screw type fasteners with stripped heads

• 1/4” hex shank allows for use in any type of bit driving tool

Edge cutting tips extract worn, damaged or stripped fasteners without causing additional damage• Patented edge cutting tip is designed to bite and remove partial stripped hex fasteners

LS62110

4 PIECE STRIPPED SCREW EXTRACTOR SET• Six Lobed Spiral Bits are Designed to Remove

Rounded or Stripped Fasteners with Internal Drive Heads.

• Fits Torx® and Torx Plus® sizes T-40 toT-55; internal hex sizes 1/4” to1/2” and 6mm to13mm.

$34.97

Item Desc. Price

TN12756 1/16-3/8” $24.73

TN12757 1.5-10m $21.49

133




NUT DRIVERS AND SCREWDRIVERS

22 PIECE SCREWDRIVER SET

$26.01

GEARWRENCH ScrewdriversTri-lobe ergonomic handle to obtain optimal balance of strength and comfort, with dual material handle for comfort and performance. The “speed zone” at base of handle allows faster turning in low back torque applications each tool is laser etched with part number and size and the black oxide non slip tip allows for in-creased grip on the fastener.

KD80050 6 Piece ergo handle screwdriver set $54.13

KD80054 7 Piece torx screwdriver set $56.44

KD80059 4 Piece long screwdriver set $54.17

KD80060 10 Piece pozi and slotted screwdriver set $80.39

PMW80022

• Chrome Vanadium shafts magnetic tips

• 8 Slotted, 5 Phillips, 3 StarDrivers, 5 Nut drivers and 1 Tack Puller

SU9832

7 PIECE SAE NUT DRIVER SET• Packaged in heavy duty plastic tray for easy

storage• Hex bolstered shafts, Hollow shafts 3/16”-1/2”

$33.80

SU9832M

7 PIECE METRIC NUT DRIVER SET• Packaged in heavy duty plastic tray,

Hex bolstered, Hollow shafts. 5mm-11mm.$38.70

FOW72-490-003

PRECISION SCREWDRIVER KIT• This precision Screwdriver and Tool Set is ideal for

miniature work.• Features knurled and chromed swiveling

handles.• Screwdriver and Tool Set contains 9 screwdrivers,

1 tapered point scratch awl and 1 magnetic pick-up tool.

• Screwdriver size range: #00, #0, #1, 1?32”, 3?64” 1/16”, 5/64”, 3/32” and 1/8”.

$29.01

KS5220

7 PIECE BIT WRENCH SET• 5° ratcheting increment allows for increased functionality in restricted applications• Use with any 1/4” drive bit as a ratcheting screwdriver• Consists of: (1) 15° offset wrench, (1) 15°

reverse offset wrench, (1) flat wrench, and (4) bits. Bit Sizes: 1 and 2 Phillips, 1/4” and 9/32” Slotted

$43.91

KD80050 KD80060KD80054

KD80059MH29895

STUD EXTRACTOR• Works with 3/8 Impact Wrench• Works on Threaded, Broken, Stripped & Smoothed Studs

$77.95

MH66305

2 PIECE FLEX DRIVER_SET• Flexible front section bends into position, 24” OAL. • Get to hard to reach spots with any bit! • 1/4” bit holder will accept all standard bits! • 1/4”” drive for 1/4” sockets!

$38.88

UL5

MAGNETIZER DEMAGNETIZER• Overall size 1 1/16” x 1 1/16” x 1 1/16” • 2 lbs. 1 oz. Magnetizes and

demagnetizes screwdrivers and other small tools.

$3.16

PMW1710

18 PIECE SCREWDRIVER SET_• Soft Handle Screwdriver & Precision Screwdriver Set • Organizing rack stands, or mounts on wall • Contents: Slotted, Phillips, Precision & Torx drivers

$23.64

Item Pc Sizes Sale

AH201 4 6,8,10,12MM $58.46

AH202 5 1/4, 5/16, 3/8, 7/16, 1/2”

$76.13

AH203 7 1/4, 5/16, 3/8 ,7/16, 1/2 ,9/16, 5/8”

$110.66

Item Pc Sizes Sale

SU8804 4 1/4, 3/8, 5/16, 7/16”. $42.85

SU8804M 4 6, 8, 10, 12MM. $42.36

Stud Puller Sets

Stud Remover Sets

KD80066

20 PIECE MASTER SCREWDRIVER SET• Tri-Lobe ergonomic handle to

obtain optimal balance of strength and comfort

• Oil and solvent resistant • Black oxide non slip tip

$119.90

CLSD-7CB

7 PIECE CODE BLUE SCREWDRIVER SETMagnetic TipswithGo-Thru steel blades for added strength• High torque, 3-sided Code Blue® grips• Laser etched steel caps for easy identification • Screwdrivers and Nut drivers made to A.N.S.I.

standards$35.01SU9822

22 PIECE SCREWDRIVER SETHardened chrome shaftsand vapor blasted

magnetic tips • Includes 9 slotted

screwdrivers, 5 Phillips, 5 Torx, scratch awl, tack puller, and one slotted screw holder.

$32.26

134




SCREWDRIVERS AND SPECIALTY BITS

OT6180

TORX PLUS BIT SOCKET SET• Less pointed than standard Torx fasteners, these

are the only bits replacing the Torx Plus.• Set includes sizes from TP10 to TP50 with 1/4”

and 3/8” sq. drive sockets.$39.63

ET912

EXTRA LONGTORX SCREWDRIVER SET• Over all length 16”, blade length 12”• Cushion grip, ergo, handles, Sizes T10 - T30

$41.98

ET917EXTRA LONG TAMPERPROOF SCREWDRIVER SET

$43.74

Item Size Style Components Sale

Sure Grip Torx and Screwdriver Sets in Storage Trays

SK86006 9 SureGrip Standard Drivers 1/4” x 2 1/4”, 1/4” x 4”, 5/16” x 6”, 3/8” x 8”, 3/8” x 12”, Phillips P0 x 3”, P1 x 4”, P2 x 2-1/4”, P2 x 4

$100.21

SK86320 6 SureGrip Standard Drivers P0 x 3” , 1/8 X 3”, P1 x 4”, 3/16 X 4” , P2 X 4”, 1/4 X 4” $47.34

SK86321 5 SureGrip Long Drivers 3/16x6”, P2 X 4” 1/4x6”, 1/4x8”, and Torx T27x6” $49.50

SK86322 5 SureGrip Large Tip Drivers P3 X 6”, P4 X 8” , 5/16 X 6”, 3/8 X 8” , 5/16 X 8” $72.23

SK86323 7 SureGrip Torx Drivers T10x6, T15x6, T20x6, T25x6, 27x6, T30x6, T40 x 8” $85.54

SK86324 4 SureGrip X-Long Drivers 3/16 x 12”, 1/4 x 12”, P2 x 16” SureGrip 5/16 x 12 $72.21

SK86325 4 SureGrip Stubby Drivers P2 X 2 1/4”, 1/4 X 2 1/4”, 3/16 x 2-1/4, P1 x 1-1/4” $33.99

SK86326 6 Sure Grip Auto Set P1x4”, P2x4”, P3x6”, 3/16x4”, 1/4x4” and 5/16x6” $62.56

SK86330 6 CushionGrip Drivers P0 x 3”, 1/8 X 3”, P1 x 4”, 3/16 X 4”, P2 X 4”, 1/4 X 4” $52.14

CushionGrip Torx and Screwdriver Sets

SK86330 6 CushionGrip Stnd Drivers Includes: P0 x 3”, 1/8 X 3”, P1 x 4”, 3/16 X 4”, P2 X 4”, 1/4 X 4” $52.14

SK86331 5 CushionGrip Long Drivers 3/16x6, P2 X 4”, 1/4x6, 1/4x8, P2 x 8” $58.07

SK86332 5 CushionGrip Large Drivers P3 X 6”, P4 X 8”, 5/16 X 6”, 3/8 X 8”,5/16 X 8” $67.10

SK86333 7 Torx Drivers Includes:T10-T30 (6” long), and T40 (8” long) $87.92

SK86334 4 CushionGrip X-Long Drvs 3/16 x 12, 1/4 x 12, P2 x 16, 5/16 x 12” $77.19

SK86335 4 CushionGrip Stubby Drvs P2 X 2 1/4”, 1/4 X 2 1/4”, 3/16 x 2-1/4, P1 x 1-1/4 $36.82

SK86336 6 Cushion Grip P1x4”, P2x4”, P3x6”, 3/16x4”, 1/4x4”, 5/16x6” $62.56

LS81000

TORX PLUS SOCKET SETNine of the Most Popular Torx Plus® Sizes for

Automotive Applications. • Set includes: TP-10 - TP-50 in 1/4” and 3/8” drive.

$37.80

OT6100

Anodized aluminum green rail with handy magnetic rack sticks to ferrous metal surfaces

12 PIECE TORX SET• 2 piece design made from superior S2 steel to

meet or exceed torque specifications• Sizes include: 1/4” drive: T10-T30, 3/8” drive:

T40-T55 and 1/2” drive T60.$39.63

AO9448

100 PIECE MULTI BIT ASSORTMENT KIT• 100 Bits for almost

every Automotive and Industrial Application.

$19.50

Item Style Size Sale

TN16121 Tamper Torx T10,-T60 $40.97

TN16122 Torx T10,- T70 $43.14

TN16123 SAE Hex 5/64” - 1/2” $43.14

TN16124 Metric Hex 2, 2.5,-12mm $40.99

TN16135 Tamper Hex 1/16- 7/16” $14.37

TN16136 Tamper Hex 1.5- 8, 10m $14.37

TN16137 Tamper 5 Pt T8-T55 $14.37

Item Sizes Sale

LS42760 1.5 - 6m $11.14

LS42770 .050-3/16 $10.66

LS42780 T9-T40 $25.52

Item Sizes Sale

TN12735 1/16-3/8” $21.49

TN12736 1.5-10m $21.49

S2 Specialty Bit Sets On Anodized

Magnetic Aluminum Socket Rails

SureGrip Combination Screwdrivers provides comfortable square handles that give you a secure grip even with greasy hands SK86006 SK86335

OT6145

7 PIECE TAMPER PROOF TORX BIT SETT10 - T40 1/4” sq drive. 1/4” socket 1/4” sq dr.

$25.12

Folding Key Sets

Specialty Folding Ball Hex Key Sets

Color coded handle is comfortable and easy to grip. Hex keys open up to 270 degrees so there is no need to remove and reinsert the tool when working in tight spaces. When fully opened, the body forms a handle

Ball tips allow use at up to 25° angle from axis of fastener. Detent holds fastener securely on larger sizes

VMTP6P

11 PIECE TORX PLUS SET• Stubby Drivers With

3/4” & 1.0” Overall Length.

TP6P -TP55$49.76LS14750

MAGNETIC TORX SCREWDRIVER SETBits Conveniently Store in Handle. • 1/4” hex insert Torx® bits: T-15, T-20, T-25, T-30.

$17.01

135




SPECIALTY, HEX AND TORX SETS

VMV458L

18 PIECE LONG TORX SET• Torx Drivers T10 thru T50• Set includes both 4.5” and 8” long Torx Drivers• All bits are steel, the strongest hardest bits

available• Chrome Bit holders, with Black oxide blades• Drivers have 1/4” or 3/8” square drive

$105.30

VMTMS34PF

34 PIECE TORXMASTER SET• 13 torx sockets T8–T60• 11 Torx sockets E4–E20• 10 Tamper proof T10–T55

$96.15

VMUJET100

UNIVERSAL JOINT E-TORX SOCKETS• Universal Joint Torx Sockets, perfect for the

hard to get to Torx bolts on steering columns, air bags, transmissions and many other applications.

• E4 thru E8 are 1/4” square drive, E10 thru E16 are 3/8” square drive

$75.89

11 PIECE DEEP EXTERNAL TORX SOCKET SET• 2” long Deep E4

-E10 Torx Socket, ¼” Square Drive

• 2.5” long Deep E11 -E18 Torx Socket, 3/8” Square Drive, 2.5” long

$44.62VMVDE418

VMHCTSD

22 PIECE HALF CUTTORX SECURITY DRIVER SETLength of Torx tip is cut to 1/2 the Normal

Depth, this Increases strength and Improves Fastener Engagement

• 12 pc. Half-Cut Torx Stubby Tamper Proof Security Drivers, T8 thru T60

• 10 pc. 4” Long Half-Cut Torx Tamper Proof security Drivers,T8 thru T50

$85.23

VMXZN100

TRIPLE SQUARE BIT SET• 8 piece, sizes 4 thru 16mm 12 point stubby bits

$38.46

VMHCT1050

1/2 CUT TORX SET• Actual size of torx bit is 50% less than standard torx bit heads

• Knurled body, S2 heat treated steel• Sizes T10-T50

$38.46VMUJHCTR1040

SWIVEL HALF CUT TORX SET ON MAG RAIL• Stubby Half Cut Torx

With Tamer Proof Sizes TT10 Thru TT40 with 1/4” Sq. Drive

• 4” Magrail TL Base$75.08

VMUJXZN100

STUBBY XZN TRIPLE SQUARE• 6 Piece set. Set 4mm, 5mm, 6mm, 8mm, 10mm,

12mm• Stubby Drivers with 1/4” Drives, Universal Joint,

Swivel Body• 4” Magrail TL Base

$71.01

STUBBY XZN TRIPLE SQUARE DRIVE SET• Stubby One Piece Drivers With 1/4”, 3/8” & 1/2”

Drives• Magrail TL Base• 14mm, 16mm & 18mm Have Tamper Proof Holes• S2 Alloy Steel Fully Heat Treated

VMXZNS1000 $80.77

VMUJM400

U JOINT METRIC HEX DRIVER SET• Bits sore on the Vim 4” Magrail TL Base• Stubby Half Cut Hex with Satin Chrome Finish, S2

Steel, Fully Heat Treated• Universal Joint, Swivel Body allows for better

access on the fastener. 3 - 10MM Hex

$65.98 VMTPXL08

5 POINT EXTRA LONG SECURITY DRIVER SET• T10 thru T40, 12 inch long blades• Tamper Proof Torx on one end, 5 Point Security

tip opposite• Double Drive Screwdriver Handle, use as a

screwdriver or “T” handle• 1/4” square drive bit holder included

$69.93

VMHLXM100

Metric Hex Xl Driver Set, 7 PieceBall Hex & 7 Piece Hex, 3mm Thru 10mm

$81.19

VMHXL100

Inch Hex Xl Driver Set, 7 Piece Ball Hex & 7 Piece Hex, 1/8” Thru 3/8”

$81.19

14 PIECE XL HEX BIT SOCKET SETS

KD80057

12 PIECE MINI & TORX SCREWDRIVER SET• “Speed Zone” helps for turning in lower torque

applications • Mini Screwdrivers 1.5mm, 2.0mm, 2.5mm, #00,

#0, #1; Mini Torx® T5, T6, T7, T8, T9, T10 packaged in a pouch

$55.41CM9650

8 PIECE EP TORX PLUS SOCKET SETNew design services elliptical-shaped fasteners

now found on many vehicle applications. Standard Torx® or Ribe designs will not fit these fasteners. Black finish and impact quality. Includes 1/4” drive sizes EP6, EP7, EP8, 3/8” drive sizes EP10, EP12, EP14, EP16 & 1/2” drive size EP18

$49.96

VMTDI100

TORX SCREWDRIVER SET• Sizes T10 thru T30. • Ergonomic soft grip handle for nonslip

posi grip.$33.27VMTDI1200XL

12” XL TORX SCREW DRIVERSEasy grip handles with 12” long blades• Sizes T10 - T30

$34.07

136




HEX, TORX AND SPECIALTY BITS

Item # Pics Drive Pcs Style Sizes Misc Comp Sale

GY1247H A 3/8” 7 Hex 3/16”-1/2” 4” Long $98.11GY1247MH B 3/8” 7 Hex 4-8,10,12mm 4” Long $94.95GY1247S C 3/8” 7 Trip Sq 5,6-M16 even 4” Long $159.74GY1247ST D 3/8” 7 Trip Sq Sec 5,6-M16 even 4” Long $186.51GY1267H E 3/8” 7 Hex 3/16”-1/2” 6” Long $128.31GY1267MH F 3/8” 7 Hex 4-8,10,12mm 6” Long $125.10GY1297H G 3/8” 7 Hex 3/16”-1/2” $67.49GY1297MH H 3/8” 7 Hex 4-7,10,12mm $67.49GY1298HC I 3/8” 13 Hex 3/16”-1/2”, 4-7,10,12mm $125.32GY1307S J 1/2” 7 Trip Sq 5,6-M16 even 12 Point $125.49GY1307ST K 1/2” 7 Trip Sq Sec 5,6-M16 even Security $135.01GY1347S L 1/2” 7 Trip Sq 5,6-M16 even 4” Long $172.26GY1360H M 1/2” 10 Hex 1/4”-3/4” 6” Long $216.09GY1363MH N 1/2” 13 Hex 6-8, 10-19mm 6” Long $280.24GY1398H O 1/2” 10 Hex 1/4”-3/4” $86.66GY1398UH P 1/2” 8 Hex Univ 1/4”-3/4” Universal $161.71GY1498MH Q 1/2” 10 Hex 6-19mm $86.66GY1499UMH R 1/2” 9 Hex Univ 6-19mm Universal $181.91GY1598HC S 1/2” 18 Hex 1/4”-3/4”, 6-8, 10-19mm $162.35GY9298HC T 1/4” 14 Hex 1/8’’-3/8’’, 2-10mm $119.21GY1200T C 3/8” 9 Star T20-T55 $79.49GY1206T V 3/8” 6 Star T20-T55 6” Long $174.84GY1207S W 3/8” 7 Trip Sq 5,6-M16 even $111.21GY1207ST X 3/8” 7 Trip Sq Sec 5,6-M16 even Security $136.00GY1234T Y Multi 12 Star T10-T60 $76.26GY1235TT Z Multi 12 Star Sec T10-T60 Security $90.70GY1300T AA 3/8”,1/2” 8 Star T30-T70 $97.16GY8096H BB 1” 6 3/4” 12”-1” $226.47GY8196MH CC 3/4” 6 Hex 12,14,17,19,22,24mm $226.47GY9096H DD 1” 6 1” 3/4’,7/8’’,1’’,1-1/8’’,1-1/4’’,1-3/8’’ $303.01

Item # Pics Drive Pcs Sizes Sizes. Misc. Sale

SU2637 A 1/2” 20 Imp. Hex 1/4”-3/4”,6-19mm $129.91SU3670S B 3/8” 9 Imp. Torx T20-55 $33.64

SU4506 C 3/4” 5 Imp. Hex 3/4””,-1””, 1-1/8”, 1-1/4” $98.70

SU4507 D 3/4” 5 Imp. Hex 14,17,19,22,24mm $98.70SU5606 E 1” 6 Imp. Hex 3/4”-1 3/8” $176.44

SU5607 F 1” 6 Imp. Hex 14,17, 19, 22, 24, 27mm $174.67

SU9920 G 3/8” 14 Reg & Ball Hex 1/8”-3/8” Long $82.07SU9921 H 3/8” 14 Reg & Ball Hex 3-8,10mm Long $82.29SU9928 I Multi 18 Star T10-T50 4.5” & 8 “ Long $99.47SU9929 J Multi 9 Triple Sq M4-M18 4” Long $50.75

Black Protective Coating Retains More Rust Preventative Compound Than Black Oxide. Etched Sizes For Easy Id.

B

B

C

C

D

D

E

E

J

J

KL

M N

OP

S

V

Z

Q

T

W X

R

U

Y

F

F

G

G

H

H

I

I

A

CC

AA

DD

BB

A

Impact and Chrome Hex and Torx Sets

All Bits Made of Impact Quality Steel

137




HAND TOOLS, SOCKETS AND EXTENSIONSHEX, TORX AND SPECIALTY BITS

Extension SetsKD81002 5 Piece 1/4 Drive

Extension Set$34.79

KD81202 3 Piece 3/8 Drive Locking Extension

$34.22

KD81300 3 Piece 1/2 Drive Extension Set

$44.12

KD81301 3 Piece 1/2 Drive Wobble Extension

$47.88

KD81302 3 Piece 1/2 Drive Locking Extension

$60.12

6 POINT UNIVERSAL FLEX SOCKET SETS

VMHMS26

26 PIECE HEX MASTER BIT SET• Metric Hex Drivers 2mm thru 19mm SAE,

Fractional Drivers 3/32” thru 3/4”• All bits are steel, the best bits available, Press fit

bits & holders• Chrome Bit holders, with diamond knurl for

fingertip control• Drivers have 1/4”, 3/8” or 1/2” square driv

$93.03

VMXZNS412

1/4” STUBBY TRIPLE SQUARE BIT SET• For Use on Most Foreign Vehicles, Especially German

Made! 6 Piece Stubby XZN Drivers, 1/4” Square Drives• Set Includes Sizes 4mm, 5mm, 6mm, 8mm, 10mm

& 12mm. Satin Chrome Plated, Impact Quality. Set Assembled on a 4” Magrail TL Magnetic

$33.45

PMW32113

1/2” AND 3/8” DRIVE RATCHET ADAPTOR SET• Converts any breaker bar, sliding t-handle or

extension into a ratchet.• Works independently as a thumbwheel ratchet.• 52 Gear Teeth. Precise 7º sweep.

$47.31

SU9723

13 PIECE 1/4” DRIVE SPLINE SOCKET SET W/MINI-FLEX RATCHETUniversal Spline geometry on sockets that can

be used to turn Universal Spline, 6pt, 12pt, Star, square, and rounded hexagonal fasteners.

• 72 Fine Tooth 1/4” Dr. Flex-Head Ratchet Precise Ratchet Head flex tolerances, designed to keep head in desired position during use

• Push button socket lock/release mechanism• 1/4” Hex shank to 1/4” Sq. Dr. Socket Adapter

included for use of sockets with cordless drills and screwdrivers

$33.97

VMTE500

TURBO GRIP IMPACT EXTENSION• 1/2” Impact Extension, 9” long• For use with all 1/2” impacts• Free spinning knurled aluminium bearing can be

held with latex gloves without grabbing or pinching$49.38

Item # Drive Sizes Drive End Pricte

SK40936 1/4” 1-1/2, 2, 4, 6, 10, 14” Wobble $83.45

SK4916T 1/4” 2, 3, 6, 8, 10, 14 Locking $73.66

SK4941 1/4” 3, 7, 15 Locking $108.04

SK4514 3/8” 1.5, 3, 6, 12 Standard $56.76

SK4516 3/8” 7.5, 13.5, 19.5 Locking $138.30

SK4524 3/8” 3, 6, 8, 12 Wobble $68.02

SK4536 3/8” 1.5, 3, 4, 6, 10, Standard $75.73

SK4537 3/8” 1.5, 3, 4, 6, 8, 10 Standard $83.92

SK4538 3/8” 1.5, 3, 4, 6, 8, 10, 18, 24 Standard $138.30

SK4539 3/8” 1.5, 3, 4, 6, 8, 10, 18, 24 Wobble $157.21

SK45674 3/8” 3, 6, 10 Ball, Impt $54.58

SK40165 1/2” 2, 3, 4, 5, 10 Standard $97.99

SK4114 1/2” 5, 10, 20 Standard $79.34

SK46164 1/2” 2, 3, 5, 10 Ball, Impt $70.15

Item # Piece Drive Sizes Price

KD80310 7 1/4” 3/16”- 9/16” $64.76

KD80311 12 1/4” 5-15mm $111.02

KD80564 7 3/8” 3/8”-3/4” $73.46

KD80565 10 3/8” 10-19mm $104.92

Sk’s High Polish Superkrome Finish Protects Tools From The Harsh Working

Environments Found In Today’s Workplace. The Impact Series Of Products Is Coated

With A Protective Finish That Extends Life And Appearance Against Rust.

GearWrench technology allows for the socket to withstand increased leverage where higher torque is needed.

SK locking extensions feature a SureGrip lock which holds the socket on the extension. This prevents the socket

from remaining stuck to the fastener.

Chrome Wobble Extensions Increases Manuverability in all Directions to Make it Easier to Access Confined Spaces using a Standard Socket.

SK Extension Sets

TN12079

EXTRA LONG 3 PIECE 3/8” DR. EXTENSION SET• Extra long extension for easy access in confined areas• Chrome plated to resist corrosion• Sizes includes: 18, 24, & 30”

$26.73SU9726

38 PIECE DOOR AND FENDER BIT SET• Neatly stored in an aluminum case with viewing window• Comes with most popular bits, mini ratchet and

extension piece to easily access hidden areas in the door, dash or fender.

$38.95

VMVHC77

77 PIECE HALF CUT RATCHET BIT SET• All automotive bits needed for general and specialty use• Half Cut Bits for Increased Strength• Includes Low Profile, Double Ended Mini Ratchet

Wrench$124.45

SU9934

34 PIECE MASTER STAR BIT SOCKET SETHigh quality S2 Steel bits set in chrome vanadium

sockets provide maximum durability 34 Star bit socket set is a complete master set to handle any application

• Star socket drivers T8 thru T60 • Star sockets E4 thru E20 • Star Tamper proof sockets T10 thru T55

$94.46

TN16061

61 PIECE MULTI-BIT SETRust & corrosion

resistant finish• S2 alloy steel bits for

increased durability & strength

• 2-1/2” Magnetic bit holder

• Convenient storage case$14.70

138




RATCHETS AND SOCKET SETS

Item # Item Style Piece Sizes Drive Price

KD80577 A Scrdvr 7 4,5,6 SL, 1,2,3 Ph, &2 PZ 3/8” $50.95

KD80578 B Hex 10 4,-10, 12, 14, & 17mm 3/8 & 1/2” $71.84

KD80579 B Hex 10 5/16”-5/8” 1/4 & 1/2” $67.92

KD80580 C Hex 12 2, 2.5, 3 to 12mm 3/8” $76.66

KD80581 C Hex 12 1/16” to 3/8” 3/8” $69.66

KD80585 D Torx 16 T10-T60, Lg/Sh 3/8” $22.97

KD80586 E Ball Hex 7 1/8 to 3/8” 3/8” $40.07

KD80587 E Ball Hex 7 3 to 7mm 3/8” $40.07

KD80588 F Torx 10 T10-T50 1/4 & 3/8” $65.62

KD80727 G Torx-All 34 7-T60, E4-20 1/4”-1/2 $168.62

KD83000

68 PIECE 1/4” & 3/8” SOCKET SET• 1/4” Drive sizes 3/16”- 1/2” 6 Pt. Deep, 6-14 mm 6 Pt.

Deep, 4-12 mm 12 Pt. Std., 3/16”-1/2” 12 Pt. Std.Sockets • 3/8” Drive sizes 3/8”- 13/16” 6 Pt. Deep, 9mm -18 mm 12 Pt. Std., 3/8”- 7/8” 12 Pt. Std. Sockets • 2” 6” Extensions 1/4” and 3/8” Drive

$137.42

These Gearwrench Mechanics Socket Sets feature The 120XP™ Ratchets. The Double-Stacked Pawl design delivers 120 Positions with a 3° ratcheting arc to get the job done faster

Popular Torx, Hex and Bit Socket Sets

Mechanics Sockets

The Gearwrench bit holding system forces the bit surface to the opposing side for maximum bit retention on the fastener. Most sets come mounted on a clip rail.

B

G

C FED

A

KD80550P

56 PIECE 3/8” DRIVE 6 PT. SOCKET SET• 3/8” Drive 120XP™ Ratchet, 3” & 6” Extension,

and Universal Joint• Standard Sockets:1/4”,- 1” and 6,-19mm• Deep Sockets: 1/4”,-7/8” and 6,-19mm

$169.44

Item # Dr Sizes Price

KD80304S 1/4” 4-15m $42.44

KD80305S 1/4” 3/16-9/16” $32.51

KD80554S 3/8” 6-19m $57.25

KD80555S 3/8” 1/4”-7/8” $48.20

Shallow broach socket walls for ability to “nest” fastener. Base of socket turned down for easy grip

Semi Deep Mid Length Socket Sets

KD80700P

49 PIECE 1/2” DRIVE 6 PT. SOCKET SET• Includes: 1/2” Drive 120XP™ Ratchet, 3” & 5”

Extension and Universal Joint• Standard Sockets: 7/16” to 1-1/8” and 10-24mm• Deep Sockets:1/2”-15/16” and 10-19mm

$251.27

KD80300P

51 PIECE 1/4” DRIVE 6 PT. SOCKET SET• 1/4” Drive 120XP™ Ratchet, Thumbwheel

Ratchet, 2” & 6” Extension, and Universal Joint• Standard Sockets: 3/16-9/16”, and 4, 5, 5.5,-

15mm• Deep Sockets: 3/16”-9/16”, and 4, 5, 5.5, -15mm

$141.81

Item # Size Gear Style Grip Misc. Sale

KD81007F 1/4” 84 Standard Cushion 6.9” $33.60KD81009F 1/4” 84 Flex Cushion 8.25” $40.33KD81011F 1/4” 84 Standard Polish 5.13” $24.00KD81011P 1/4” 120XP Standard Polish 7.5” $29.99KD81012F 1/4” 84 Flex Polish 6.97” $28.80KD81203F 3 Pc. Set 84 Lg Flex Cushion 1/4,3/8,1/2” $151.71KD81204F 2 Pc. Set 84 Flex Cushion 1/4,3/8” $102.54KD81206F 3 Pc. Set 84 Standard Polish 1/4,3/8,1/2” $109.78KD81206P 3 Pc. Set 120XP Standard Polish 1/4,3/8,1/2” $130.01KD81207F 3 Pc. Set 84 Standard Polish 1/4,3/8,1/2” $145.62KD81208F 3/8” 84 Standard Cushion 9.5” $61.33KD81209F 3/8” 84 Stubby Polish 4.5” $37.25KD81210F 3/8” 84 Flex Cushion 13.63” $73.62KD81211F 3/8” 84 Standard Polish 8.4” $43.79KD81211P 3/8” 120XP Standard Polish 9” $54.75KD81212F 3/8” 84 Stub Flex Polish 5.2” $44.70KD81213F 3/8” 84 Off/Flex Cushion 12.26” $77.29KD81214F 3/8” 84 Off/Flex Polish 11” $55.22KD81215F 3/8” 84 Flex Polish 13” $52.57KD81216F 2 Pc. Set 84 Flex Polish 1/4, 3/8” $73.25KD81230F 4 Pc. Set 84 Flex Polish 3/8” Stub $165.07KD81303F 1/2” 84 Standard Cushion 13” $66.83KD81304F 1/2” 84 Standard Polish 11” $47.73KD81304P 1/2” 120XP Standard Polish 11” $59.69KD81306F 1/2” 84 flex Polish 17” $57.29KD81400 3/4” 24 Standard Polish 19.8” $92.84

Lifetime Warranty Drive Ratchets Feature • Patented low profile and performance heads• Flush mounted reversing lever • 84 and 120 Tooth gear mechanisms

Gearwrench Ratchets

139




Crows Foot Wrench Sets

SPECIALTY AND COMBINATION WRENCH SETS

Item # Pieces Style Pts Sizes Price

SK86237 7 Stubby 12 3/8”-3/4” $78.75

SK86247 7 Stubby 12 10-18mm $80.18

SK86255 15 Standard 12 1/4”-1” $213.19

SK86265 15 Standard 12 8-22mm $198.71

SK86014 16 Standard 6 1/4” - 1-1/4” $390.06

SK86017 13 Long 12 1/4” - 1” $212.02

SK86026 14 Long 12 12-19mm $233.98

SK86037 19 Long 12 6-24mm $374.88

SK86118 13 Long 6 1/4” - 1” $285.00

SK86123 13 Standard 6 7 - 19mm $175.52

SK86124 14 Standard 6 1/4” - 15/16” $219.10

SK86127 13 Long 6 7 - 19mm $211.98

Item # Piece Size Style Price

KD81906 6 9,11-20,21mm Offset $84.31

KD81907 6 1/4”-7/8” Offset $65.81

KD81910 5 1/4”-7/8” Flex Head $101.11

KD81911 6 9-19, 21mm Flex Head $113.77

KD81914 33/8”x7/16”, 1/2”x9/16”, 5/8”x11/16”

Flex Head $49.87

KD81915 3 9-14mm Flex Head $48.23

Item # Pieces Sizes Price

SRRLW700 4 8-15mm $128.96

SRRLW750 6 8-19mm $178.94

SRRLW800 4 5/16”-3/4” $128.96

Item # Pc Set Sizes Price

KD89118 11 3/8”-1” $97.64

KD89119 10 10-19mm $87.88

Item # Piece Sizes Price

KD81908 11 3/8”- 1” $87.79

KD81909 10 10-19mm $76.41

SU9708 8 Piece Flare Set 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, & 7/8” $29.68

SU9710M 10 Piece Flare Set 10mm thru 19mm $37.85

SU9720 7 Piece Crowsfoot SAE 1 thru 1 1/2” $72.37

SU9722 6 Piece SAE 1 5/8 thru 2” $103.01

SU9730 8 Piece Metric 24mm thru 30mm and 32mm $66.84

SU9740 7 Piece Metric 34mm thru 36mm, 38mm, 41mm, 42mm & 46mm $96.66

Super-Krome finish providesmaximum corrosion resistance andprotects tools from harsh working environments. The patentedSure-Grip wrenchingdesign drives the sidehex of the fastener for addedtorque without damage to the fastener.

VMWTC624

E-TORX BOX WRENCH SET

RATCHETING JAW FLEX FLARENUT WRENCH SETS

• Use wrenches where extra leverage is needed• Sizes E6 - E24

Unparalleled access to the most difficult-to-reach nuts making it easier and quicker to complete jobs. • Head catches 5 sides of the nut allowing force to be applied

without rounding or crushing the fastener.• Quickly ratchet nuts and bolts without removing the wrench

from the fastener • Ratcheting jaw allows you to advance the nut without

removing the wrench from the fastener

$44.81

The most technologically advanced wrench available for use on brake, A/C, fuel and power steering lines. Works with metric-sized nuts and fittingsAs more pressure is applied to the wrench, the grip on the nut tightens

Ratcheting Flex Head Line Wrench Sets

Crowfoot Wrench Sets

265 degree Flex-Head design allows quick access to recessed line fittings, while standard offset offers torque and access better than its competition.

Flex and Offset Flare Wrench Sets

EZLW4M

4 PIECE METRIC RATCHETING LINE WRENCH SET• Unique geometry allows easier work on

damaged, rounded and rusted nuts.• 180 degree flexheads for hard to reach areas. • Sizes include 8mm-15mm. Opening/closing

spring (flarenut) snaps over pipe or nut.

$122.15

Item # Sizes Price

KD89100 1/4”-7/8” $114.60

KD89101D 9-21m $140.85

The Gearwrench Ratcheting Crowfoot Wrenches provide improved access to nuts and bolts located in hard to reach places or confined spaces. • Use with 3/8” drive extensions to access hard to reach fasteners• Use when there is not sufficient space to use a ratchet• Open end wrench allows access to fasteners when there are height restrictions

Ratcheting Crowfoot Wrench Sets

SU9710M

SU9708

SU9730

SU9720

SU9722

SU9740

140




Torque Multipliers

WRENCH SETS

• 3/4” Input to 1” (Male) 2000 Ft/lbs.

X4LW750

1/2” INPUT TO 3/4” OUTPUT (MALE) 1000 FT/LBS.• 1/2” input to 3/4” Output (Male) 1000 Ft/Lbs.

$380.22

X4TD1000

3/4” INPUT TO 1” (MALE) 2000 FT/LBS.

$523.08

X4The X-4 Torque Multiplier is a Geared Head Wrench incomparable to any other tool. The multiplication is achieved through a planetary gear train at a 4:1 ratio (or other) depending on the model. It generates torque’s from a few hundred pound-feet to thousands of pound-feet with precision and ease.

MTNSW11K

11 PIECE FRACTIONAL CHROME SERVICE WRENCH SET• Pump Wrenches - Chrome• Thin Pattern for Use on Jam Nuts and in

Confined Areas• 30º Angle Heads 3/4”-1-1/2”

$281.97 MTNSW11KM

11 PIECE METRICCHROME SERVICE WRENCH SET• Pump Wrenches - Chrome• Thin Pattern for Use on Jam Nuts and in

Confined Areas• 30º Angle Heads, 19-40mm

$346.93

Service WrenchesItem # Description Sale

MTN1224 3/4” $24.13

MTN1226 13/16” $24.81

MTN1228 7/8” $24.81

MTN1230 15/16” $24.81

MTN1232 1” $24.81

MTN1234 1-1/16” $25.56

MTN1236 1-1/8” $26.40

MTN1238 1-3/16” $26.53

MTN1240 1-1/4” $26.53

MTN1242 1-5/16” $27.08

MTN1244 1-3/8” $28.13

MTN1246 1-7/16” $28.13

MTN1248 1-1/2” $29.05

MTN1250 1-9/16” $32.62

MTN1252 1-5/8” $32.62

MTN1254 1-11/16” $34.68

MTN1256 1-3/4” $34.68

MTN1258 1-13/16” $36.77

MTN1260 1-7/8” $36.77

MTN1262 1-15/16” $36.77

MTN1264 2” $36.77

MTN1268 2-1/8” $37.14

MTN1272 2-1/4” $37.69

MTN1276 2-3/8” $41.19

Open End Wrenches thin pattern service wrenches are made with a Chrome finish and 30 degree angle head for use on jam nuts or in confined areas. Made in the USA

GearWrench Non-Ratcheting WrenchesItem # Description Sale

Gearwrench non-ratcheting wrenches feature Surface Drive Plus. This provides a stronger grip on fasteners, and reduces fastener rounding.Sizes are stamped on both sides and on head - Greater visibility to wrench size means less fumbling.

KD81900 A 24 Piece Combination Wrench Set 1/2 - 1” and 8-22MM $188.94

KD81901 B 15 Piece SAE Combination Set sizes 1/4-1” $140.25

KD81902 C 15 Piece Metric Combination Set 8-22MM $132.42

KD81903 D 20 Piece Stubby Wrench Set SAE: 3/8” - 15/16” Metric: 10 -19mm $186.77

KD81904 E 10 Piece Metric Stubby Wrench Set Sizes 10-19MM $97.52

KD81905 F 10 Piece SAE Stubby Wrench Set Sizes 3/8-15/16 $97.31

KD81912 I 12-Piece Metric X-Beam Combination Non-Ratcheting Wrench Set 8-19mm

$145.21

KD81913 J 9 pc. SAE X-Beam Combination Wrench Set 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” and 3/4”

$105.42

KD81990 K 3 Piece Adjustable Wrench Set Includes sizes 6”, 8” and 10”. $52.66

KD81916 L 22 Piece Combination Wrench Set 6-32mm $190.40

KD81925 M 14 Piece Metric 6 Point Wrench Set 6-19mm $65.44

KD81919 N 44 Piece 12 Point Long Pattern Wrench Set sizes 1/4” to 1-1/2”; 6-32mm $334.65

KD81918 O 15 Piece SAE Long Pattern Combination Wrench Set 5/16 - 1-1/8 and 1-1/4 $135.69

B C

FED H

I

ML

J

K

A

N

141




D

SPECIALTY WRENCH SETS

A

Item # Pic Pcs Sizes Style Price

SU9930 A 11 3/8”-1” Stubby $47.14

SU9930M A 10 10-19mm Stubby $37.69

SU9940 B 5 5/16-3/4 S-Style Box $36.22

SU9940M B 5 8-19mm S-Style Box $35.78

SU9950 D 5 3/8-15/16” Double Box $41.41

SU9950M D 5 10-19mm Double Box $32.90

Item # Pcs Style Sizes Price

VT9017 17 Combo 1/4” to 1-1/4” $68.26

VT9317 17 Combo 8-24mm $56.00

VT9105 5 Combo 30-36mm $78.44

VT9404 4 Combo 1-5/16” to 1-1/2” $60.33

VT9109 9 Long Combo 21-29mm $80.73

VT9111 11 Long Combo 10-20mm $38.29

VT9411 11 Long Combo 1/4” to 7/8” $41.25

VT9414 14 Long Combo 3/8” to 1-1/4” $80.31

VT9415 15 Long Combo 3/8” to 1-1/4 $88.81


VT8211 11 Flare 3/8” to 1” $63.87

VT8811 11 Flare 8-19mm $58.75

VT9215 15 Service 3/4” to 1-5/8” $143.12

VT9515 15 Service 20-36mm $135.78

VT9212 12 Service 1-11/16” to 2-5/8” $170.31

VT710 10 Stubby Combo 7/16” to 1” $31.96

VT8910 10 Stubby Combo 10-19mm $31.96

VT8109 9 Super Thin Combo Pop. 8-32mm $36.81

VT8307 7 Super Thin Combo Pop. 3/8”-1-1/4” $32.88

VT8308 8 Super Thin Combo Pop. 3/8”-1-5/16” $47.63


VT214 14 30° and 60° 3/8” to 1-1/4” $80.31

VT819 9 30° and 60° 24-32mm $102.09

VT9810 10 15° and 60° 1-5/16” to 2” $285.99


VT7412 12 3/8” Dr. Crow 8-19mm $38.09

VT7711 11 3/8” Dr. Crow 3/8” to 1” $38.09

VT7814 14 1/2”” Dr. Crow 1-1/16” to 2” $110.55

VT7917 17 1/2”” Dr. Crow 20mm to 46mm $148.75


SU9914 14 3/8” to 1-1/4” $86.81

SU9914M 14 6-19mm $69.12

SU9916 6 1-3/8”-2” $146.63

SU9926 6 20-25m $56.88

SU9927 7 26-32mm $97.87


PMW1104M 13 20-32mm $141.99

PMW1104S 6 7/8” to 1-1/8”, 1-1/4” $75.01

PMW1114 14 3/8” to 1-1/4” $42.49

PMW1114M 14 6-19, 21,22mm $40.12


SU9714 14 3/8” to 1-1/4” $70.29

SU9715 14 6-19, 21,22mm $49.05

Item # Pcs. Sizes Price

SU9604 4 2-1/8, 2-1/4, 2-3/8, 2-1/2” $289.10

SU9605M 5 20-24mm $32.00

SU9606M 6 25-32mm $66.57

SU9707 7 1-5/16, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2” $140.55

SU9707M 7 33, 34, 36, 38, 41, 46, 50mm $142.67Item # Pieces Sizes Price

SU9915 14 3/8” to 1-1/4” $89.30

SU9917M 12 8-19mm $46.86

SU9917MPR 25 8-32mm $184.10

SU9918M 5 20-24mm $47.12

SU9919M 8 25-32mm $109.95

Angle Head Wrench Sets • Fully polished steel with15 and 60 degree angled ends for easy access •Canvas pouch included

Jumbo Wrench Sets

S-Style , Doulble Boxand Stubby Sets

V-Grove Combination Wrenches• Fully polished drop forged alloy steel •Canvas pouch included

Large Size Combination Wrench Sets

Specialty Wrenches• Fully polished drop forged alloy steel • Canvas pouch included

Raised Panel Combination Wrench Sets in CanvasTool Pouch• High density, dropped forged alloy steel for strength

B

Combination Wrench Sets

Drop forged, fully polished standard and large size sets.Combo SAE sets up to 1-1/4” include the 1-3/16” size!Thin Head Crowfoot Sets

Specialty Wrench Sets Includiing: Service/Hydraulic; Flare; Stubby, and Super Thin Head Styles

Specialty Wrench SetsIncludiing: Service/Hydraulic; Flare; Stubby, and Super Thin Head Styles

Open End Angle Wrenches

StubbySuper Thin Combo

Service

Flare

Angles allow the use of these wrenches in multiple positions.

142




RATCHETING WRENCH SETS

KD85490 $206.46

KD85498


X-Beam Flex and Reversing Combination Ratcheting Wrench Sets525% increase in surface contact provides more power with less stress. Flexible head design for ultimate versatility. Up to 25% longer than standard wrenches to access those hard to reach fasteners. Surface Drive Plus provides up to 25% more torque

KD85288 12 Piece X-Beam Flex Set Includes 8 thru19mm sizes $211.48

KD85298 9 Piece X-Beam Flex Set Includes 5/16”thru 3/4” sizes $160.63

KD85388 12 Piece X-Beam Reversable. 8 thru19mm sizes $201.88

KD85398 9 Piece X-Beam Reversable. 5/16”thru 3/4” sizes $153.33

Reversible GearWrench Sets

KD9509 13 Piece Reversible Combination GearWrench Set - SAE $237.31

KD9533 8 Piece SAE Reversible Lever Set 5/16”-3/4” $110.13

KD9550 10 Piece Metric Stubby Flex Head Set 10-19mm $199.87

KD9570 7 Piece SAE Stubby Flex Head Set $148.27

KD9620 12 Piece Reversible Lever Metric Set 8-19mm $179.65

Flex Head Wrenches

KD9701 8 Piece SAE Flex Head Set 5/16-3/4 $159.48

KD9901 12 Piece Metric Flex Head Set 8-19mm $172.17

KD9902 16 Piece Flex Combination GearWrench Set - Metric $376.38


Combination GearWrench Sets

KD9308 8 Piece SAE Set 5/16”-3/4” $95.02

KD9309 4 Piece Large SAE Sizes 13/16,-1” $108.56

KD9312 13 Piece SAE Set 1/4”-1” $209.15

KD9412 12 Piece Metric Set 8-19mm $140.77

KD9413 4 Piece Large Metric Sizes 21-,25mm $107.87

KD9416 16 Piece Metric Set 8-24mm $244.12

KD85098 12 Piece Metric XL GearWrench Set 8MM - 19MM $174.54

KD85099 16 Piece Metric XL GearWrench Set 8MM - 22MM, 24MM $302.67

KD85597 Combination Ratcheting Wrench Sets with Speed Open End $137.00

Stubby Sets

KD9507 7 Piece SAE Stubby Set 3/8”-3/4” $97.99

KD9520 10 Piece Metric Stubby Set 10-19mm $133.71

Zero Degree GearBox Ratcheting Wrench Sets

KD85988 12 Pieces Xl Gearbox Ratcheting Wrench Set- Metric 8-19mm $244.33

KD85998 9 Pieces Xl Gearbox Ratcheting Wrench Set- Sae 5/16-3/4 $181.50

KD85987 5 Piece add on set includes sizes 20, 21, 22, 24, and 25mm. Packaged in a blow mold tray $186.40

KD85989 17 Piece Metric Zero Degree Set includes 8mm thru 22mm and 24-25mm, Packaged in tray $430.90

KD85996 4 Piece GearBox Add-On Set includes sizes 13/16”, 7/8”, 15/16”, and 1”, Packaged in tray $154.40

KD85999 13 Piece GearBox Master Set includes sizes 5/16”-1” Packaged in a blow mold tray $331.17

KD8548812 Piece Metric Set 8mm-19mm

$214.638 Piece Set Size Range: 5/16”-3/4

$143.10

KD8559712 Piece Set includes 8mm-19mm

$137.00

KD85599

8 Piece set includes 5/16” - 3/4”

$97.31

The Index to Complete Versatility. 13 locking positions allow you to reach around obstructions to turn nuts and bolts in hard to reach areas

Indexing Combination GearWrench Sets

CombinationRatchetingSets withSpeed End

Allows for speed turning without removal

• Saves time, energy and will work where standard open ends wrenches won’t fit• Box end is standard GW Ratcheting

METRIC INDEXING DOUBLE BOX WRENCH SETExtra-long, forged steel beam with indexing

lockable joints at each end enabling each ratcheting box end to pivot over 180 degrees

• 13 Multiple locking positions allows technicians to get around obstructions and tight corners

• Sizes 8 x 10mm• 11 x 12mm• 13 x 14mm• 15 x 16mm• 17 x 18mm• 19 x 21mm

143




SPECIALTY WRENCH SETS AND TOOL ORGANIZERS

Flexible Double Box Universal Spline XXL Sppecialty Wrench Sets Fits TORX®, SQUARE , 6 POINT Partially Rounded/Stripped Fasteners ,12 POINT , 6 POINT and SPLINE. The Flexible, nonreversible 180 degree angle accesses hard to reach areas. Patented 72 tooth design. Packaged in high density foam tray.

EZNR4S

• Sizes: 5/16 x 3/8, 7/16 x 1/2, 9/16 x 5/8 and 11/16 x 3/4.

$175.25 EZNR5M

• Sizes: 8mm x 10mm, 12mm x 14mm, 13mm x 15mm, 16mm x 18mm, and 17mm x 19mm.

$224.62

VMMT1

MAGNETIC ADJUSTABLE TOOL & PARTS TRAY• The trays hold over 5 lbs. and can be stuck to most shop equipment. • When stuck to the underside of the hood or

inner fender wells, the tray can be leveled to hold all of the tools and parts needed.

$38.13EZF6M

6 PIECE METRIC NON REVERSE DOUBLE BOX RATCHETING WRENCHES• Extra Long, Universal Spline.• Meets and exceeds ASME/ANSI torque

specifications.• Packaged in the signature E-Z Red high density

foam tray.$192.99

KD81923

28 PIECE MASTER WRENCH SET• Sizes 1/4”-15/16”,

and 6-19mm full polish

• 6 Point Master Metric & SAE

$123.50

EZRRW5

5 PIECE METRIC DEEP REACH RATCHETING SPLINE SET RRW5• Deep spline drive, 15º Swing arc for hard to reach tight spaces. Stop ring ensures that wrench will not slip below the head of the fastener.• 72 Tooth ratcheting system for high torque. • Universal Spline works on most fasteners• Includes sizes: 8mm x 10mm, 12mm x 13mm,

14mm x 15mm, 16mm x 18mm and 17mm x 19mm.

$105.51

EZMP31

AUTO SELF ADJUSTING WATERPUMP PLIERS• Self-controlled adjustment on the work piece

simply by squeezing the handles - ideal for frequent different sized fittings.

• One-hand operation for left and right handed people.

• Locking lever for space saving transport with reliable closed handles.

• Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping

$107.43

EZ4S12

QUARTER STICK RATCHETING WRENCH• Custom Reversible switch• Knurled low profile thumb wheel for extra

precision• Push button quick release• Flexible heads at each end for multiple angles• High polished Chrome finish 1/4” magnetic bit

drive 1/4” square drive, 12 inches long

$51.14

Unique, extendable locking shaftand 180º flexible design. Quick release drive head

Item # Size Sale

EZMR482F 3 Piece Extendable Flex head ratchet set

$114.29

EZMR12F 1/2” Extendable Flex Head Ratchet

$45.41


$29.36


$33.38

Extendable Ratchets with Flex Heads

Item # Size Sale

Extra Long Flex Head Ratchets have a slim head design for easy access to difficult to reach areas.• Reversible and Lifetime warranty• Meet and exceed ANSI/ASME torque requirement

EZMR1412F 1/4” Drive 12” Long Flex Head Ratchet

$31.12


$38.48


$82.26DIGITAL TORQUE WRENCHES WITH LCD DISPLAYS IN KG-CM, N-M, IN-LB, & FT-LBOperates in Both Clockwise & Counter-Clockwise Directions with a Quick Release Drive Head• Audible Torque Confirmation By Means of

Buzzer. Easy to Set Up Peak / Trace Mode• Anti-Slip Soft Grip, length: 12-3/8”

Item # Drive Range Sale

DEARM601-3 3/8” 2-37 ft-lbs $139.98

DEARM601-4 1/2” 10-99 ft-lbs $150.75

EZ4S04

STUBBY 4” QUARTER STICK• 4 inches long with custom reversible switch• Knurled low profile thumb wheel for extra

precision.• 180 degree flexible heads at each end for

multiple angles$43.23

144




TORQUE WRENCHES

Item # Drive Rating Sale

Click Style Ratcheting Torque Wrenches

TN23146 1/4” 20-200 in/lbs $35.91

TN23147 3/8” 60-960 in/lbs (5-80 ft/lbs) $35.91

TN23148 1/2” 120-1800 in/lb (10-150 ft.lb) $41.08

Item # Drive Torque Sale

Digital Torque Measuring Adaptors

DEARM602-3 3/8” 3-59 ft-lbs $75.33

DEARM602-4 1/2” 4-147.6 ft-lb $75.33

Item # Drive Range Sale

Click Style Torque Wrenches

CE3T425 1/2” 25-250 ft/lb $116.44

CE3T660 3/4” 100-600 ft/lb $482.07

KD85050 30 - 200 In/Lb, 1/4” Drive $152.58

KD85051 25 - 250 In/Lb, 3/8” Drive $147.23

KD85052 10 - 100 Ft/Lb, 3/8” Drive $149.23

KD85053 10 - 100 Ft/Lb, 1/2” Drive $152.21

KD85054 20 - 250 Ft/Lb, 1/2” Drive, $167.21

KD85055 100 - 600 Ft/LB, 3/4” Drive $685.81

Great for Quick and Accurate Tightening• Click style has field replaceable head kits, and torque in SAE or Metric• Beam style are for quick tightening applications

Sealed low profile head keeps out contaminants for durability and long life Micrometer twist lock ring prevents accidental change of torque setting during use. Most wrenches are dual scale SAE/Metric

Manufacturers of Precision Torque Tools andTesting Equipment Since 1938 Extremely Accurate-Accurate- most within 4% of reading from 20% of full scale to full scale.

SK Torque Wrenches

Specialty Gearwrench Torque Wrenches

SU9701A 1/2” Torque Wrench 10-150 Ft/LBS SAE/Metric Scale $59.91

SU9702A3/8” Torque Wrench 10-80 FT/LBS Overall length:14-3/4 long

$51.65

SU9703B1/2” Torque Wrench 30-250 FT/LBS Overall length: 20-1/4” long

$114.97

Sealed Tear Drop design keeps out contaminants for superior performance and life. +/- 3% accuracy. Locking collar allows easy setting of desired torque and prevents accidental change of torque setting while in use. Pliable Elastomer handle grip for comfort and oil resistance.

Sunex Torque Wrenches

XL MICROMETER TORQUE WRENCHES

• Reversible ratchet mechanism for quicker use• Locking handle prevents unwanted setting changes.

Micrometer-type scale for setting torque. Set desired torque by rotating handle. Metal body and handle construction, and includes case.

Item # Dr. Style Measures Misc Sale

KD85056 3/8” Click 5-75 ft/lb 15° Flex Head $179.10KD85057 1/2” Click 25-250 ft/lb 15° Flex Head $200.67KD85073 3/8” Digital/Angle 10-100 ft/lb 15° Flex Head $350.58KD85074 1/2” Digital/Angle 25-250 ft/lb 15° Flex Head $398.50KD85070 3/8” Digital 10-100 ft/lb Fixed Head $315.13KD85071 1/2” Digital 25-250 ft/lb Fixed Head $351.81

Item # Pic Dr. Style Measures Increment Sale

PIM1R200HX A 1/4” Ratcheting 30-200 FP 1 $191.58

PIM1R50H A 1/4” Ratcheting 10-50 FP 0.5 $191.58

PIMD1F35H B 1/4” Screwdriver 5-35 IP 0.5 $216.43

PIC2FR100F C 3/8” Split Beam 20-100 FP 2 $163.55

PID2F150HM D 3/8” Dial 30-150 IP 2.5 $211.50

PIM2FR100F A 3/8” Ratcheting 20-100 FP 0.5 $196.25

PIM2FR100FX A 3/8” Ratcheting 15-100 FP 1 $196.25

PIM2R200HX A 3/8” Ratcheting 30-200 IP 0.5 $196.25

PIM2FR100FX A 3/8” Ratcheting 15-100 FP 0.5 $196.25

PIC3FR250F C 1/2” Split Beam 50-250 FP 5 $219.63

PIM3R250F A 1/2” Ratcheting 50-250 FP 1 $219.63

PIM3R250FX A 1/2” Ratcheting 40-250 1 $219.63

PIC4D600F C 3/4” Split Beam 200-600 FP 10 $477.27

Item # Pic Dr. Style Measures Sale

SK74006 A 1/4” Beam 60 IP $73.66

SK75002 B 1/4” Click 20-100IP $279.27

SK75025 B 3/8” Click 50-250 IP $183.48

SK75100 B 3/8” Click 10-100 FP $187.98

SK76120 A 3/8” Beam 75 IP $82.32

SK75150 B 1/2” Click 20-150 FP $196.40

SK75250 B 1/2” Click 25-250 FP $215.15

SK76130 A 1/2” Beam 150 IP $82.89

SK75600 B 3/4” Click 100-600 FP $915.38

TN11360

3 PIECE LOW PROFILE LONG RATCHET SET• 36 fine-tooth ratchet design for fast performance• Less than 10 degree sweep • Sizes include: 12” x 1/4” Dr, 18” x 3/8” Dr, 24” x 1/2” Dr

$110.77

B

C

D

A

A

B

Measures Static Torque Measurement• Operates both clockwise & counter-clockwise• LCD display displays in N-m, In-Lbs, ft-Lbs, Kg-cm• Audible torque confirmation

145




TOOL ORGANIZERS

Item # Sizes Sale

13 Piece SAE and Metric Labeled Wrench Racks with Spring Tabs that Hold Wrenches in Place

HR5301 1/4” - 15/16” $6.98

HR5302 6mm - 18mm $6.98

Item # Size Sale

Grip Holding Wrench Racks

VMV513 11 $10.88

VMV514 15 $11.89

Item # Size Sale

HR1401 1/4” Combo Socket Holder SAE $13.33

HR1402 1/4”m Combo Socket Holder Metric $13.33

HR3801 3/8” Combo Socket Holder SAE $13.33

HR3802 3/8”m Combo Socket Holder Metric $13.33

HR1201 1/2” Combo Socket Holder $15.72

HR1202 1/2”m Combo Socket Holder $15.72

HR9910 Complete Display 4 Each of Peg Style Socket Holders

$287.02

Item # Size Sale

HR9301 1 Each SAE Holders $35.21

HR9302 1 Each Metric Holders $35.21

Ball Retaining Socket HoldersItem # Description Sale

VMV512 10 Stubby $9.89

VMV520 1/4” Clip Rack $13.52

VMV521 3/8” Clip Rack $13.52

VMV522 1/2” Ball Retaining Rack

$13.52

VMV523 Set of 3 $40.46

SAE & MetricPeg StyleSocket Holders

VMV444

SOCKET RACK TRAY• For 1/4, 3/8, 1/2” drive sockets

$24.07

Item # Drive Size Pegs Sale

Click Style Ratcheting Torque Wrenches

MSLASTRAY 1/4, 3/8, 1/2” 48 $76.15

MSLASTRAY25 1/4” x $57.69



Item # Drive Sale

LS40460 Black $18.90

LS40490 Red $18.90

MSLAS25• 1/4” drive 13 slot 14” length

$30.00


$32.31


$34.62

LOCK A SOCKET Magnetic HolderAccomodate all types of sockets, including swivels, impacts, shallows, and deep.


LS40120 1/4” 26PC Socket Holder Red $18.90

LS40130 1/4” 26PC Socket Holder Green $18.90

LS40200 3/8” Long Socket Holder, Red $23.60

LS40210 3/8” Long Socket Holder, Green $23.60

LS40900 1/2” Socket Holder, Red $31.19

LS40990 1/2” Socket Holder, Green $31.19

MagneticSocketHolders

Grips wrenches and holds them in place. Red plastic, tapered sides, loop handle, mounting holes

PLASTIC PLIERS RACKSKeeps toolboxes neat and organized.• Holds pliers and wrenches vertically with 13 slots

To lock the socket, just turn right 90º. To unlock, simply turn left 90º. Rubber pegs are located underneath for surface grip for protection. Swivel handles make transporting easy. Made from 16-gauge powder coated steel for extra strength.

LOCK-A-SOCKET MAGNETIC TRAYS

PMW9155

4-1/4’’ MAGNETIC PARTS TRAY• 1 1/4” X 4 1/4” Round stainless steel tray. Securely stores small nuts, bolts and parts• Rubber coated permanent magnet prevents

scratches. Sticks to any ferrous metal surface, it even works upside down

$3.76

PLYPLR30

PLIER RACKNo more MessOrganize your pliersHolds approximately 30 pliers

$23.08

REL3-750

PROGEAR TOPSIDE TOOL TRAYCrank System adjusts the tray altitude from 41” to

72” to put the tray right where you need it. The large tray includes a can holder and extends out from the riser so it can be positioned over the engine compartment.

• 2 ft. 3/8 Width, 3 ft. 3/4” Length

$252.75

146




POPULAR SOCKET SETS AND RATCHETSSOCKET SETS AND ACCESSORIES

Item # Size SaleTRTSCD3813B 13 Piece 3/8” Drice Deep Metric and SAE Set 3/8”-19mm $173.08

TRTSCS2509B 9 Piece 1/4” Drive Set SAE and Metric 7.75 - 10mm (3/8) $78.79

TRTSCS2513B 13 Piece 1/4” Drive Set SAE and Metric 4.5mm- 7.5mm, 3/16”- 9/32” $114.62

TRTSCS2516B 16 Piece 1/4” Drive Set SAE and Metric 6mm-10mm (3/8”) $140.11

TRTSCS2522B 22 Piece 1/4” Drive Set SAE and Metric 4.5mm-10mm (3/8) $194.51

TRTSCS3813B 13 Piece 3/8” Drive Shallow Set SAE and Metric 3/8”-3/4”, 10mm-19mm $142.31

TRTSCS5015B 15 Piece Combination Set 7/16”-13/16”, 11mm-21mm $198.57

TRTSDE5002 Turbo Wheel Removal Set Sizes 3/4”-21mm, 7/8”- 15/16” and Punch $48.75

TRTSFD3807B 8 Piece 3/8” Drive Deep SAE Set 3/8”-3/4” $93.74

TRTSFS3807B 8 Piece 3/8” Drive Shallow SAE Set 3/8”-3/4” $76.70

TRTSFS5005B 5 Piece 1/2” SAE Set 3/4”- 1” $65.93

TRTSFS5010B 10 Piece 1/2” Drive SAE Set 7/16”- 1” $132.53

TRTSMD3809B 9 Piece 3/8” Drive Deep Metric Set 10mm-19mm $120.11

TRTSMS3809B 9 Piece 3/8” Drive Metric Set 10mm-19mm $98.90

TRTSMS5010B 10 Piece 1/2” Drive Metric Set 12mm- 21mm $132.53

TRTSMS5107B 7 Piece 1/” Drive Metric Set 14mm- 21mm $92.86

Removes damaged fasteners using helical teeth. The tapered helical design allows the socket to bite harder and fit the damaged fastener better. The amount of grip increases with the amount of force applied. Features steel made in the U.S.A. using certified heattreaters and platers.

Lug Nut Removal Set

SK’s high polish SuperKrome finish protects the tools from the harsh working environments found in today’s workplace. All sockets feature SK’s patented SureGrip hex design, which drives the side of the fastener, not the corner, to avoid edge breakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool is used. Made with pride in the U.S.A by the Ideal Brand of Products

U

R

Q

P

O

N

L

K

J

I

H

G

F

E

D

C

B

A

S

T

V

W

X

M

Item # Pics Drive Pcs Sizes Pts Style Sale

SK13 A 3/8” 13 7-19mm 6 Shallow $84.29

SK1312 B 1/4” 13 4-5.5-15mm 6 Deep $116.72

SK1313 C 1/4” 13 4-5.5-15mm 6 Shallow $69.15

SK1335 D 1/4” 10 5-14mm 6 Flex $202.62

SK1337 E 1/4” 12 5-5.5-15mm 6 Flex $233.00

SK1340 F 1/4” 10 5-14mm 12 Shallow $49.85

SK1854 G 3/8” 14 6-19mm 6 Deep $136.16

SK1863 H 3/8” 13 7-15m Xd 16-19mm 6 Deep $132.68

SK1871 I 3/8” 11 9-19mm 12 Deep $108.06

SK1913 J 1/2” 1315-19,22, 24, 26,-28,30,32mm

12 Shallow $142.91

SK1919 K 1/2” 19 10-28mm 12 Shallow $178.32

SK1924 L 1/2” 24 10-28, 30,32mm 12 Shallow $299.43

SK1947 M 1/2” 21 10-28, 30,32mm 6 Deep $338.09

SK1951 N 1/2” 21 10-28, 30,32mm 12 Deep $332.76

SK1959 O 1/2” 19 10-28mm 6 Shallow $207.55

SK3910 P 3/8” 10 10-19mm 6 Flex $243.14

SK3911 Q 3/8” 10 10-19mm 12 Flex $240.55

SK3919 R 3/8” 19 6-24mm 6 Shallow $136.06

SK3958 S 3/8” 18 7-24mm 12 Shallow $132.68

SK4506 T Misc 5 1/4”-1/2” n/a Adaptors $57.82

SK4607 U 3/8” 7 3/8”-3/4” 6 Flex $158.81

SK4935 V 1/4” 10 3/16”-9/16” 12 Flex $204.18

SK4946 W 1/4” 10 3/16”-9/16” 12 Shallow $49.85

SK4950 X 1/4” 10 3/16”-9/16” 12 Deep $88.37

SK94562

62 PIECE METRIC SUPER SET 1/4” AND 3/8” DRIVEGet the Most Complete Metric Set in 1/4”

and 3/8” Drive - Made in America with SK SuperKrome and a Lifetime Warranty

• Includes Standard and Deep sockets, ratchets, extensions, adapter and U-joint

• 1/4” drive shallow 4mm, 4.5mm, 5mm, 5.5mm, -15mm,; and deep 5.5mm, -15mm

• 1/4” drive ratchet with 2” and 6” extensions. • 3/8” drive sockets shallow 6-22mm standard

and deep 8 - 19mm• 3/8” ratchet and 3” and 6” extensions, U-joint

and an adapter

$309.87

SK’s high polish SuperKrome® finish, which protects the tools from the harsh working environments found in today’s workplace.

147




POPULAR SOCKET SETS AND RATCHETS

18” RATCHETING BREAKER BAR

TN12018

• 1/2” drive ratchet head swivels 180°• Maximum torque: 376 lbs/ft (52 kg/m)• 3-way ratcheting action: right-hand thread,

left-hand thread or lock

$40.20Item # Type Sale

TN11202 Straight Set $31.32

TN11203 Offset Set $31.32

Extra-long flex-head design for hard-to-reach fasteners. P36-tooth head ratchet mechanism for high torque applications.

TN11072 1/2” Dr Extra Long Flex-head Quick Release Ratchet $62.64



TN11075 3pc Extra Long Flex-head Quick Release Ratchet Set $107.55

Item # Drive Length Style Price

SK40970 1/4” 4.5” Pro $41.93

SK40971 1/4” 6.5” Pro $50.71

SK3770 3/8” 10.8” Bent Flex $71.47

SK3870 3/8” 10.7” Roto Head $94.58

SK40952 3/8 5.4” Breaker Bar $25.54

SK45173 3/8” 4.5” Pro-Slim $41.93

SK45170 3/8” 7.6” Pro $52.55

SK42470 1/2” 10.3” Pro $69.37

SK41652 1/2” 16 Breaker Bar $57.27

SK41654 1/2” 24” Breaker Bar $90.17

SK40170 1/2” 15” Pro $94.40

SK47170 3/4” 18” Pro $168.18

SK47155 3/4” 18” Breaker Bar $93.31

SK47153 3/4” 18” Sliding T Bar $56.68

Item # Size Price

VMRLR4 1/4” $49.32

VMRLR6 3/8” $50.66

TN11088

3 PIECE EXTRA LONG RATCHETS• Geared Action - Teeth

less-than-5 degree sweep for use in tight spots and confined areas.

• 1/4” -12” long ; 3/8”- 18” long ”; 1/2” – 24” long” Drives , with TPR handles,

$108.57

SK47170SK3870

SK40952

SK3770

SK47155

SK47153

SK42470SK40170SK45170SK45173

SK42470

SK41652, SK41652

KD80304

13 PIECE METRIC DEEP SOCKET SET• Includes: 4-5.5mm, 6-15mm Deep Sockets,

packaged on a clip rail. • Large hard stamped identification. • Entry angle guides fastener, serrated depth as

deep as the fastener.$51.47

KD80305

1/4” DRIVE 6 POINT DEEP SAE SOCKET SET• 3/16” thru 9/16” Deep Sockets packaged on a

clip rail. • Serrated depth as deep as the fastener. • Large hard stamped identification.

$39.60

KD80326

14 PIECE. 1/4” DRIVE SHALLOW METRIC SOCKET SETKnurled line at base of socket allows for extra grip

and easy identification of Metric sizes. • 4mm-13 standard sockets 6 point• 1/4” Drive Full Polish Teardrop Ratchet, 2” & 6”

Standard Extension, and Spinner Handle $46.00

KD80327

22 PIECE 1/4” DRIVE SHALLOW METRIC SOCKET SETKnurled line at base of socket allows for extra grip

and easy identification of Metric sizes.• 1/4” drive 6mm -14mm 6 point deep metric

sockets; $54.17

2 Piece Bit Driver and Ratchet Sets

Multi Application Roto-Lock Ratchet

Sets Include (1) Hex Bit Ratchet and (1) 1/4” Dr Ratchet. Great for use in today’s increasingly compact cars

• 60 tooth gearhead design • High torque , reversible , 3” long

Ratchets act as a T-Handle Driver, Roto-Head Straight or Adjustable Roto-Head with lock! • Rotates 180° & locks in 15 different

positions. 3/8” does not have t-handle.• Quick Release button.

15 º

TN12048

40” BREAKER BAR• 3/4” Drive• Maximum torque: 1000 ft-lbs (138 kg/m)

$93.45

TN120193/8” Extra Long 18” Breaker Bar

$24.92

TN120471/2” Extra Long 30” Breaker Bar

$38.42

TN120491” Extra Long 40” Breaker Bar

$105.99

High Torque Extra Long Breaker Bars

VT41024

24” SUPER BREAKER BAR 1/2 DRIVE• Strong Alloy Head holds when additional torque

is applied$36.88

KD81217

CHROME ADAPTOR SET• Set Includes: 1/4” F - 3/8” M 1/4”, 3/8” F - 1/4” M

Dr. 3/8”, 3/8” F - 1/2” M Dr. 3/8” and 1/2” F - 3/8” M Dr. 1/2” Adapters

$26.56

TN16150

HYBRID IMPACT REDUCING UNIVERSAL ADAPTOR SETUse as an impact reducing/increasing adaptor, or pull the drive out and it turns into a universal joint. Universal works on a 6 ball system for greater turn radius. Sizes include: 1/4”-3/8”, 3/8”-1/4”, 3/8”-1/2”, 1/2” - 3/8”, 1/2” to 3/4”

$52.15

KD81205

10 PIECE UNIVERSAL AND REDUCING ADAPTOR SET• Chrome Universals - 1/4” & 3/8” Drive, Impact

Universals - 1/4”, 3/8”, & 1/2” Drive• Chrome Adapters - 1/4” F - 3/8” M Drive - 3/8” F -

1/4” M Drive - 1/2” F - 3/8” M Drive - 3/8” F - 1/2” M Drive - 1/2” F - 3/4” M Drive

• Packaged in blow mold case$134.89

148




SOCKET SETSIMPACT SOCKET SETS

Item # Pics Drive Pcs Style Sizes. Misc. Sale

SU1818 A 1/4” 23 6pt. Mag. Std 3/16” - 1/2”, 5-15mm 2” ext, UJ $113.09

SU1831 B 1/4” 14 6pt. Mag. Dp 4-15mm $131.01

SU1874 C 1/4” 74 6pt. Dp, Std, Univ. 3/16” -9/16”,4-15mm Torx, Ext, Uni’s $344.50

SU2645 D 1/2” 26 6pt. Std 10-30,32-36mm $124.48

SU2646 E 1/2” 26 6pt. Dp 10-30,32-36mm $222.74

SU2650 F 1/2” 13 6pt. Std 7/16”-1 1/4” $56.20

SU2651 G 1/2” 13 6pt Dp 3/8”-1 1/4” $84.95

SU2652 H 1/2” 14 6pt Std 10-27mm $48.18

SU2653 I 1/2” 14 6pt Dp 10-27mm $86.75

SU2668 J 1/2” 39 6pt Dp, Std 3/8”-1 1/2” UJ $237.52

SU2669 K 1/2” 39 6pt Dp, Std 9-30mm UJ $189.27

SU5153DD L 1/2” 29 6pt Dp 7/16”-1 1/4”, 10-27mm 2 Flip Sockets $162.52

SU2670 M 1/2” 15 12pt Std 3/8”-1 1/4” $119.56

SU2672 N 1/2” 15 12pt Dp 10-24mm $105.21

SU2678 O 1/2” 14 12pt Std 7/16”- 1 1/4” $72.51

SU2679 P 1/2” 13 12pt Std 10-22,24mm $54.37

SU2690 Q 1/2” 20 6pt. Std 1 5/16”-2 1/4” $396.71

SU2691 R 1/2” 16 6pt Dp 1 5/16”-2 1/4” $573.14

SU2693 S 1/2” 12 6pt Dp 23-28,30,32-36MM $166.01

SU2698 T 1/2” 39 12PT Dp, Std 3/8”-1 1/2” UJoint $242.80

SU2699 U 1/2” 39 12PT Dp, Std 9-24,26,27,30mm $255.70

SU2845 V 1/2” 5 6pt XL Dp 1”-1 5/16 $144.58

SU2848 W 1/2” 8 6pt XL Dp 1/2”-15/16” $161.92

SU2858 X 1/2” 13 8pt Std 3/8”-1 1/8” $130.47

SU3674 Y 3/8” 12 12pt Std 5/16”-1” $41.50

SU3675 Z 3/8” 13 12pt Std 7-19mm $37.87

SU3682 AA 3/8” 13 12pt Dp 7-19mm $59.38

SU3325 BB 3/8” 25 6pt Dp, Std 5/16-1” UJ $119.62

SU3326 CC 3/8” 25 12pt Dp, Std 5/16-1” UJ $119.22

SU3329 DD 3/8” 29 6pt Dp, Std 8-22MM UJ $122.98

SU3330 EE 3/8” 29 12pt Dp, Std 8-19, 20,21mm UJ $118.32

SU3342 FF 3/8” 42 6pt Dp, Std 5/16”-3/4”,8-19mm 3” ext, UJ $123.68

SU4680 GG 3/4” 8 6pt Std 1”-1 1/2” $94.33

SU4681 HH 3/4” 8 6pt Dp 1”-1 1/2” $112.85

SU4683 II 3/4” 17 6pt Std 1”-2” $385.13

SU4684 JJ 3/4” 17 6pt Std 26-46mm Skips Sizes $308.74

SU4685 KK 3/4” 17 6pt Dp 1”-2” $504.26

SU4686 LL 3/4” 17 6pt Dp 26-44mm Skips Sizes $504.26

SU4687 MM 3/4” 9 12pt Std 3/4”-1 1/4” $141.14

SU4695 NN 3/4” 29 6pt Dp 3/4”-2 1/2” EZ Travel Case $792.56

SU4696 OO 3/4” 29 6pt Std 3/4”-2 1/2” EZ Travel Case $623.00

SU5681 PP 1” 8 6pt Dp 7/8”-1 1/2” $168.01

SU5692 QQ 1” 21 6pt Std 3/4”-2” $422.15

SU5693 RR 1” 21 6pt Dp 3/4”-2” $604.71

B C D E

J K L M N O P

S

V

Z

CC

FF

II

LL

OO

RR

Q

T

W X

AA

DD

GG

JJ

MM

PP

SS

R

U

Y

BB

EE

HH

KK

NN

QQ

FG

H

I

Radius Corner Design Reduces Wear on the Fastener and Socket! Sunex features over 2,500 individual sockets and sets. Unless clearlymarked, Sunex Sockets are Warrantied For Life!

A

149




SOCKET SETS

AO2134

21 PIECE SOCKET SET• Set Includes: 1 Reversible Ratchet 1 Flexible

Bar: 20” 2 Extension Bars: 4” and 8” 16 Sockets: 3/4” Drive, 7/8”,15/16”, 1”, 1-1/16”, 1-1/18”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-3/4”, 1-13/16”, 1-7/8”, 2”

$135.23

Item Description Sizes Length Extensions U-Joint Sale

Deep and Shallow 6 Point Impact Socket Sets

SK4050 17 Piece Set 1/2” Drive 3/8”-3/4” Deep/Shallow 3”,5” 1/2” $156.78

SK4051 28 Piece Set 1/2” Drive 3/8” to 1-1/8” & 1-1/4” Deep/Shallow None None $305.54

SK4052 22 Piece Set 1/2” Drive 8-19mm Deep/Shallow None None $192.45

SK4053 30 Piece Set 1/2” Drive 8-22 & 22mm Deep/Shallow None None $295.22

SK4090 40 Piece Set 3/8” Drive 5/16” - 3/4”, 8-19mm Deep/Shallow None None $300.64

SK87920 20 Piece 6 Point Deep 3/4” Drive

5/8” to 2” Deep None None $737.00

Item Description Sizes Drive/Point Extensions Misc. Components Sale

Deep and Shallow 6 Point Impact Socket Sets

SK91844-12 41 Piece SAE Metric

Shallow 3/16” to 9/16” and 5mm, 5.5mm to14mm; Deep 1/4 to 9/16” and 6 to14mm.

1/4” Dr. 12 Pt. 2”, 6” 4.5” Pro Ratchet $204.73

SK91848 48 Piece SAE Metric

Shallow 3/16” to 9/16” and 4, 5, 5.5 to 15mm ; Deep 1/4”, to 9/16” and to15mm.

1/4” Dr. 6 Pt. 2”, 6” 4.5” Pro and thumb Ratchets, 1/4”F to 3/8”M drive adapter 3/8”F to 1/4”M drive adapter and 1/4” U joint

$207.24

SK91860 60 Piece Master SAE Metric Socket

Shallow and Deep 1/8” - 9/16”: Shallow and Deep 4, 4.5, 5, 5.5 to 16mm

1/4” Dr. 6 Pt. 2”, 6” 4.5” Pro Ratchet, 1/4”F-3/8”M, 3/8”F-1/4”M Adapters, and U Joint

$281.44

SK94547-12 47 Piece SAE Metric Set

Shallow1/4” to7/8” and 6 to19mm ; Deep 3/8” to 7/8” and10 to19mm.

3/8” Dr. 12 Pt. 3”, 6” 7.5” Pro Ratchet $238.98

SK94549 49 Piece SAE Metric Set

Shallow1/4”,to 7/8” and 6 to19mm; Deep 3/8” to 7/8” and10 to19mm

3/8” Dr. 6 Pt. 3”, 6” 7.5” Pro Ratchet, Spinner and U Joint

$225.90

SK4147 47 Piece SAE/Metric

Shallow, 1/2” to 1-1/8”; and 10 to 21mm, 23 &, 24mm; Deep 1/2” to 15/16;and 10 to19mm

1/2” Dr. 12 Pt. 2”, 5” 10.3” Pro Ratchet $402.10

SK4147-6 47 Piece SAE/Metric

Shallow, 1/2” to 1-1/8”; and 10 to 21mm, 23 &, 24mm; Deep 1/2” to 15/16;and 10 to19mm

1/2” Dr. 6 Pt. 2”, 5” 10.3” Pro Ratchet $402.10

SK4725 25 Piece SAE Shallow 7/8” to 2”, 2 1/8” & 2 1/4”

3/4” Dr. 12 Pt. 3”, 8”, 16”

18” Pro Ratchet and T-Bar

$822.15

100% Made In The U.S.A., Featuring SK’s Patented Suregrip Hex Design, Which Drives The Side Of The Hex, Not The Corner.

Extra Recess Depth Allows For Use Where Threaded Fasteners Protrude Above The Nut Or Where The Fastener Is Domed.

Black Protective Coating Retains More Rust Preventative Compound Than Black Oxide. Etched Sizes For Easy Id.

SK’s high polish SuperKrome finish, protects the tools from the harsh working environments found in today’s workplace.

All sockets feature SK’s patented SureGrip hex design, which drives the side of the fastener.

Item # Desc. Sizes Sale6 Point Swivel Impact Socket Sets

SK33300 8 Piece SAE Set

5/16” - 3/4” $162.94

SK33351 10 Piece Metric Set

10-19mm $176.06

Item # Piece Sale

SK86172A-1 172 $1,309.96

SK86650A-1 650 $7,848.89

SK86850A-1 850 $12,015.42

SK’s smooth collar design protects the user’s hand while in use by preventing the pin from working loose.

AO78815

3 PIECE 1/2” DRIVE DUAL FUNCTION DEEP TIRE IMPACT SOCKET SET• Patented dual function design allows sockets

to be used as Standard Sockets or 360° Swivel Universal Sockets. Sizes Include: 17, 19, 21mm

• Hollow deep impact socket design 4.12” OAL

$61.32

Master Mechanics Tool Sets

SK’s high polish SuperKrome® finish protects the tools from the harsh working environments found in today’s workplace.Most tools feature a lifetime warranty, excluding normal wear, tear, and mis-use. Master Set Includes Metric/SAE components.

150




GREY PNEUMATIC AND SUNEX IMPACT SETS

Designed for the removal of spark plugs in hard to reach places and especially useful on transverse mounted engines.

Grey Pneumatic is a world supplier of Impact and Specialty Sockets. Most SocketsCarry a Lifetime Warranty against defects in materials and workmanship.

GP Uses Powerful Magnets to Hold Fasteners Securely. Great for use in Impact or Non-Impact Applications

Radius Corner Design Reduces Wear on the Fastener and Socket! Unless clearly marked, Sunex Sockets are Warrantied For Life!

Item # Pics Drive Pcs Style Style Misc Comp Sale

GY81227RD A 3/8” 27 5/16”-1” 12Pt. Dp/Std Ratchet, 3,6”w ext. $172.99GY81235MRD B 3/8” 35 7-22mm 12Pt. Dp/Std Ratchet, 3,6” w ext. $189.27GY81259CRD C 3/8” 59 5/16”-1”, 7-22mm 12Pt. Dp/Std Ratchet, 3,6”w ext. $272.82GY81627RD D 3/8” 27 5/16’’ to 1’’ 6Pt. Dp/Std Ratchet, 3,6”w ext. $172.99GY81635MRD E 3/8” 35 7-22mm 6Pt. Dp/Std Ratchet, 3,6”w ext. $189.27GY81659CRD F 3/8” 59 5/16”-1”, 7-22mm 6Pt. Dp/Std Ratchet, 3,6”w ext. $272.82GY82222D G 1/2” 22 3/8” to 1-1/2” 12Pt. Dp Ratchet, 3,6”w ext. $260.88GY82622 H 1/2” 22 3/8” to 1-1/2” 6Pt. Std Ratchet, 3,6”w ext. $217.14GY82622D I 1/2” 22 3/8” to 1-1/2” 6Pt. Dp Ratchet, 3,6”w ext. $260.88GY8912BRQ J 1/2” 3 1/4”,3/8”,1/2” Ratchets Tray $133.16GY89253CRD K 1/2” 53 3/16”-9/16”, 4-15mm 12Pt. Dp/Std Ratchet, 2,4,6”w ext, spinner $218.95GY89653CRD L 1/2” 53 3/16”-9/16”, 4-15mm 6Pt. Dp/Std Ratchet, 2,4,6”w ext, spinner $218.95

Item # Pics Drive Pcs Style Sizes. Sale

GY1213MDG A 3/8” 13 6 Pt. Dp 7-19mm $207.87GY1213MG B 3/8” 13 6 Pt. Std 7-19mm $96.81GY1224G C 3/8” 24 6 Pt. Std 1/4”-3/4”, 7-19mm. 3”ext, UJ $152.20GY1525G D 1/2” 25 6 Pt. Std 3/8 -1” and 10 - 21mm, 3” ext, UJoint $240.92GY9709DG E 1/4” 9 6 Pt. Dp 3/16’’ to 1/2’’ $101.54GY9709G F 1/4” 9 6 Pt. Std 3/16’’ to 1/2’’ $54.64GY9712MDG G 1/4” 12 6 Pt. Dp 5-15mm $134.51GY9723G H 1/4” 23 6 Pt. Std 3/16”-1/2”, 5-15mm, 2” ext, UJ $125.25

Item # Pics Drive Pcs Sizes Misc. Sale

GY8007 A 3/4” 7 Deep 1’’; 1–1/16’’, 1–1/8’’, 1–1/4’’ thin– wall; 33mm ; 1–1/2’’ budd. 13/16’’ sq $162.22

GY8032 B 3/4” 11 3/4’’, 13/16’’, 7/8’’, 1’’, 1–3/16’’ and 33mm deep; 1–1/16’’, 1–1/8’’ 1–1/4’’ thin–wall, 1–1/2’’ budd; 13/16’’ sq $235.36

GY8370 C 3/4” 7 2”-2 3/4” Pinion X-Thin $554.52

GY9007 D 1” 7 1–3/16’’; Deep 1–1/16’’, 1–1/8’’ and 1–1/4’’ thin–wall; 33mm and 1–1/2’’ Budd; 13/16’’ sq $199.65

GY9153 E 1” 10 Dp Thin 11/16’’, 11/8’’, 11/4’’; Budd 11/2’’. Dp 33, 35, 41. Sq 13/16’’, 17mm and 21mm $282.16

Item # Pics Drive Pcs Sizes Sizes. Misc. Sale

SU2835 A 1/2” 8 12pt Dp Axle 29-39mm Skips Sizes $145.11SU4011M B 3/4” 11 6pt & 4Pt Dp 17-41, 17,20,21 Skips Sizes $184.42SU4626 C 3/4” 4 Budd 1-1/2” x 13/16” , 35x17 sq,41x21mm sq, 33mm dp $128.87SU4667 D 3/4” 7 Pinion Thin Wall 2”, 2-1/8”, 2-1/4”, 2-3/8”, 2-1/2”, 2-5/8”, 2-3/4” $460.37SU4682 E 3/4” 11 Truck Sizes 13/16”-1 1/2”, 13/16sq $114.43SU5626 F 1” 5 Budd 1-1/2” x 13/16”, 35x17, 38x20, 41x21, 33mm dp. $174.27SU5697M G 1” 7 Truck Sizes 27, 33, 35, 36, 41, 17, 21mm sq. $163.34

SU5690A H 1” 10 Truck Special 33mm, 1”, 1-3/16”, 1-3/4” Dp. 1-1/16”, 1-1/8”, 1-1/4” Thin Wall Deep, 13/16”, 15/16” sq, 1-1/2” special $239.06

Item # Pics Drive Pcs Misc. Sale

GY1202DUP A 3/8” Double Swivel 5/8”, 13/16 $79.58GY1202UP B 3/8” Swivel 5/8”, 13/16 $56.40

B

C D

E

E

J

K L

F

G H

I

A

A B

C D

F G

H

A

A

A

B

B

B

C

C

D

D

E

E

F G H

Duo Sockets are the Choice for Hand, Air and Cordless Tool Use! Thin Wall Design Combined with Strength Fits All the Needs for The Pro or Do-it-Yourselfer!

Swivel Spark Plug Socket Sets

Specialty Truck Socket Sets

Specialty Truck Socket Sets

151




GREY PNEUMATIC IMPACT SETS

Item # Pics Drive Pcs Style Sizes Sale

GY1202 A 3/8” 12 12 Pt. Std 5/16” to 1” $40.24GY1203M B 3/8” 13 12 Pt. Std 7-19mm $32.73GY1203MD C 3/8” 13 13 Pt. Dp 7-19mm $48.31GY1213 D 3/8” 12 6 Pt. Std 5/16’’ to 1’’ $40.24GY1213D E 3/8” 12 6 Pt. Dp 5/16’’ to 1’’ $55.10GY1213M F 3/8” 13 6 Pt. 7-19mm $32.73GY1213MD G 3/8” 13 6 Pt. Dp 7-19mm $48.31GY1226M H 3/8” 26 6 Pt. Std/Dp 7-19mm $74.64GY1229DM I 3/8” 29 6 Pt. Dp 5/16”-1”, 8-22mm $138.81GY1242RD J 3/8” 42 6 Pt. Std/Dp 5/16”-3/4”, 8-19mm $147.30GY1311SD K 1/2” 11 8 Pt Deep 1/2”- 1 1/2” $170.13GY1312 L 1/2” 13 6 Pt. Std 7/16” -1 1/4” $54.07GY1312D M 1/2” 13 6 Pt. Std 7/16” -1 1/4” $90.53GY1313XD N 1/2” 13 6 Pt. Xdeep 1/2”-1 5/16” $270.24GY1319 O 1/2” 19 6 Pt. Std 3/8”-1 1/2” $102.77GY1319D P 1/2” 19 6 Pt. Dp 3/8”-1 1/2” $185.67GY1324D Q 1/2” 24 6 Pt. Dp 5/16”-1 1/2” $228.48GY1326M R 1/2” 26 6 Pt. Std 10-36MM $129.54GY1326MD S 1/2” 26 6 Pt. Dp 10-36MM $230.79GY1328RD T 1/2” 28 6 Pt. Std/Dp 7/16’’-1 –1/4 $177.52GY1412M U 1/2” 14 6 Pt. Std 10-27mm $54.07GY1412MD V 1/2” 14 6 Pt. Dp 10-27mm $89.74GY1430MRD W 1/2” 30 6 Pt. Std/Dp 10-24mm $171.41GY1512DM X 1/2” 30 6 Pt. Dp 7/16”-1 1/4”, 10-27mm $199.21GY1642RD Y 3/8” 42 6 Pt. Std/Dp 5/16” -3/4”, 8-19mm $147.30GY1719 Z 1/2” 19 12 Pt. Std 3/8’’-1 1/2’’ $106.53GY1719D AA 1/2” 19 12 Pt. Dp 3/8’’-1 1/2’’ $192.48GY1726M BB 1/2” 12 12 Pt. Std 10-36mm $134.29GY1726MD CC 1/2” 26 12 Pt. Dp 10-36mm $239.23

GY8026M DD 3/4” 26 6 Pt. Std 19- 36, 38, 40, 41-44,46,50mm $407.18

GY8026MD EE 3/4” 26 6 Pt. Dp 19- 36, 38, 40, 41-44,46,50mm $589.66

GY8029 FF 3/4” 29 6 Pt. Std 3/4’’- 2– 1/2’ $660.39GY8029D GG 3/4” 29 6 Pt. Dp 3/4’’- 2– 1/2’ $928.00GY8034 HH 3/4” 8 6 Pt. Std 1”-1 1/2” $97.80GY8034D II 3/4” 8 6 Pt. Dp 1”-1 1/2” $138.51GY8038 JJ 3/4” 14 6 Pt. Std 3/4”-1 5/8” $160.11GY8038D KK 3/4” 14 6 Pt. Dp 3/4”-1 5/8” $226.75GY8129 LL 3/4” 29 6 Pt. Std 3/4”-2 1/2” $825.89GY8129D MM 3/4” 29 6 Pt. Dp 3/4”-2 1/2” $1,309.60

GY8134M NN 3/4” 8 6 Pt. Std 26-38mm $94.97GY8134MD OO 3/4” 8 6 Pt. Dp 26-38mm $162.13GY9714M PP 1/4” 14 6 Pt. Std 4-15mm $33.60GY9714MD QQ 1/4” 14 6 Pt. Dp 4-15mm $46.99GY9728M RR 1/4” 28 6 Pt. Std/Dp 4-15mm $80.02GY9748 SS 1/4” 48 6 Pt. Std/Dp 3/16”-9/16”, 4-15mm $140.53

GY9771 TT 1/4” 71 6 Pt. Std/Dp3/16”-9/16”, 4-15mm. U Sizes 1/4”-9/16”, 5-15mm

$353.06

B

C D

E

J

K L

M N

O P

S

V

Z

CC

FF

II

LL

OO

RR

Q

T

W

X

AA

DD

GG

JJ

MM

PP

SS TT

R

U

Y

BB

EE

HH

KK

NN

QQ

F

G H

I

A

Grey Pneumatic is a world supplier of Impact and Specialty Sockets. Most Sockets Carry a Lifetime Warranty against defects in materials and workmanship.

Impact Socket Sets

152




IMPACT SOCKET SETS

Item # Pics Drive Pcs Style Sizes. Misc. Sale

SU1825 A 1/4” 12 12pt Magnetic 5-15mm Magnetic $164.12SU1814 B 1/4” 12 6pt Std Flex 5-15mm $135.56SU2655 C 1/2” 7 6pt Std Flex 13-19mm $104.12SU2665 D 1/2” 13 6pt Std Flex 12-24mm $204.46SU2695 E 1/2” 9 12pt Flex Special 8,10, 11, 13-17mm Drive Line $203.85SU2696 F 1/2” 7 12pt Flex Special 5/16”-3/4” Drive Line $161.26SU3677 G 3/8” 12 12pt Dp Flex 5/16”-1” $178.54SU3678 H 3/8” 12 12pt Dp Flex 7-19mm $186.63SU3655 I 3/8” 7 6pt Std Flex 10, 13, 15 - 18MM $100.11SU3657 J 3/8” 10 6pt Std Flex 10-19mm $123.20SU3660 K 3/8” 10 6pt Dp Flex 10-19mm $134.55SU3690 L 3/8” 12 12pt Std Flex 5/16”-1” $137.66


SU3500 A 3/8” 4 Imp. Exten. 3,5,10,15” $59.03SU3504 B 3/8” 4 Imp. Exten. Wob 3,5,10,15” $36.55SU2343 C Multi 3 Reducer Increasers 1/4”-3/4” $32.86SU2500 D 1/2” 4 Imp. Exten. 3,5,10,15” $71.26SU2504 E 1/2” 4 Imp. Exten. Wob 3,5,10,15” $54.24SU2524 F 1/2” 1 Imp. Exten. 24” $43.88SU2536 G 1/2” 1 Imp. Exten. 36” $59.56SU2536T H 1/2”x3” 1 Imp. Exten. 36” $74.77SU3305 I Multi 5 Adap. & Univ. 3/8”-3/4” $57.12SU3327 J 3/8” 13 Semi Dp, U Joint 5/16”-1” $79.36SU3328 K 3/8” 14 Semi Dp 8-19,21,22m $69.23SU4405 L Multi 5 Adap. & Univ. 1/2”-1” $153.43


GY1210UM A 3/8” 10 6 Pt Std. Flex 10-19mm $143.58GY1210UMD B 3/8” 10 6 Pt Dp.Flex 10-19mm $156.04GY1212U C 3/8” 12 6 Pt Std. Flex 5/16”-1” $174.37GY1212UD D 3/8” 12 6 Pt Dp. Flex 5/16”-1” $197.32GY1313UM E 1/2” 13 6 Pt Std. Flex 12-24mm $213.70GY1313UMD F 1/2” 13 6 Pt Dp. Flex 12-24mm $238.10GY1314U G 1/2” 14 6 Pt Std. Flex 7/16”-1 1/4” $253.57GY1314UD H 1/2” 14 6 Pt Dp. Flex 7/16”-1 1/4” $271.82GY1610UM I 3/8” 12 12 Pt Std. Flex 10-19mm $143.58GY1612U J 3/8” 12 12 Pt Std. Flex 5/16”-1” $174.37GY1713UM K 1/2” 13 12 Pt Flex 12-24mm $213.70GY1714U L 1/2” 14 12 Pt Flex 7/16”-1 1/4” $253.57GY9706U M 1/4” 6 6 Pt Flex 1/4”-9/16” $74.13GY9712UM N 1/4” 12 6 Pt Flex 5-15mm $140.55

Item # Pics Drive Pcs Sizes Style Misc Comp Sale

GY103RA A Multi 3 1/4”-3/4” Adap/Ext $27.12GY1100 B 3/8” 6 3/8”-1/2” Adap/Ext 1-3/4’’,3’’, &6”, and 3/8”U $45.63GY2200 C 1/2” 6 3/8”-3/4” Adap/Ext 3”,5”,7”&1/2”U $73.85GY9703WE D 1/4” Wob Ext 2”,4”,6” $25.36

B

B

B

B

C

C

C

C

D

D

D

D

E

E

E

J

J

K

K

L

L

M N

F

F

F

G

G

G

H

H

H

I

I

I

A

A

A

A

Radius Corner Design Reduces Wear on the Fastener and Socket! Universal Design Allows you to Get Better Access to Restricted Places.

Sunex Extension and Adaptor Sets

Extension and Adaptor Sets

Universal Impact Socket Sets

Universal Flex Socket Sets

GP Universal Sockets sockets grip the fastener across a broader contact area reducing slip.

J

L K



QUICK INDEX

Seasonal Engine Service Chasis/Brake/Tire

Body RepairDiagnostic/UtilityBattery/Lube/Lifting

Storage/Power Tools Lighting Hand Tools

Pages 2-11 Pages 12-24 Pages 25-39

Pages 71-98Pages 57-70Pages 40-56

Pages 119-124 Pages 125-156Pages 99-118

Item # Size Price

MEXMG4X-75-008 Small $30.15

MEXMG4X-75-009 Medium $30.15

MEXMG4X-75-010 Large $30.15

MEXMG4X-75-011 X-Large $30.15

MEXMG4X-75-012 XX-Large $30.15

Item # Size Sale

MEXMFL-05-500 Med-Large $26.09

MEXMFL-05-540 Large X-L $26.09

Fingerless Gloves2-way, stretch Spandex padded back. Lycra finger panels, concealed interior seam stitch prevents snagging, streamlined elastic cuff with hook and loop closure providing protection & counteracting fatigue while keeping fingertips free for precise, sensitive work.

4X Automotive Repair Work GlovesMaterial 4X® palm and fingertips offers superior wear, higher abrasion and greater puncture resistance when compared to leather. Completely machine washable.• Offers the same logistical feel and fit that has been the Mechanix Wear standard

SRRAC138780

87 Piece Bonus Ac Line RePAiR KitMake instant repairs to A/C lines on hundreds of vehicles. • Includes a FREE Block off

Kit (Value $106)

$599.00MYMV6410

AtF tRAnsmission ReFiLL Kit With AdAPtoRsDispenses fluid to top-offor refill sealed automatictransmissions • Includes ten (10) adapters to connect to most Domestic, Asian and European systems

$331.73 OT7484

univeRsAL tiRe Rod AdjusteR• Unique lever design will turn hex rack

ends or hex shafts from 1” to 1 5/8”.

$59.14

SU66037

3.5 ton seRvice jAcKRapid Rise hydraulic power unit includes dual

pump pistons • Chassis Height 6.37; Length 28”• High Height 20.5, low 3.87”

$326.92 CB978-1-285-19293-2

2013 LABoR Guide mAnuALFeatures repair times for1981-2012 import anddomestic vehicles. • Provides standard and severe service times, plus OEM warranty times.

$246.11

MWK2454-22

m12 FueL 3/8” squARe dRive imPAct dRiveRPOWERSTATE™ Brushless Motorwith constant power output runs cooler • Peak Torque 117 ft-lbs • Includes: (2) M12 REDLITHIUM™ 2.0 Battery

Packs, M12™,Charger, and Carrying Case$316.96 JS96666

mini hiGh PoWeR RechARGeABLe Led FLAshLiGhtCree XP-G R5 LED Super Light• Multi-function switch toggles through Maximum, Medium, Low, SOS and Strobe• Li-Ion battery pack included

$61.04

PT011289210

PLAstic ButAne WeLdinG KitRepair All Types of PlasticDamaged Parts in Any Industry!• Great for motorcycle fenders, snow mobile, off road, hobby, home and more!

$177.36

SK91848

48 Piece 1/4” dRive suPeR setThis popular set contains the most popular SAE and Metric sizes available in 1/4” drive.• Includes a FREE 1/4” Dr. Semi Deep 5 - 15mm Socket Set

$207.24

FRee

SPRING 2013 VOLUME 124 EXPIRES 6/30/2013PRICES SUBJECT TO PRIOR SALES, NOT RESPONSIBLE FOR TYPOGRAPhICAL ERRORS. SUBSTITUTIONS MAY BE MADE FOR VALUE ADDED ITEMS. Incidental Shipping Charges May Be Added to the Selling Price

FRee Bash 24 oz. Ball Peen hammer

(value $42)

mh45650cable hose clamp PlierSolid, One Piece Construction! • Handles Standard & Space Saver Clamps up to 2- 3/32• Locking Device For Control & Comfort!FREE Dominator 4 Piece Hook and Pick Set with Purchase

$79.95

WL699995” Rotating jaw utility viseMultipurpose vise has a rotating head for clampingat any angle. • V-jaw holds 1” to 3” diameter round stock vertically.• Jaw Width 5 “• Opening Capacity Max 5 1/4 “ • Throat Depth 3 “ • Positive locking swivel base rotates 360°. • Large anvil allows for flat shaping. • Permanent pipe jaws and replaceable serrated jaws make it easy to

complete most types of products.FREE Bash hammer with purchase

$229.95

tLXtLF-nF31d-BLK1000 Lumen Rechargeable Led Flashlight 1000 Lumens of Usable Lighting and a High Duty Cycle• Three modes of brightness: 1000 lumens / 500 lumens

/ <100 lumens• Runtime: up to 2 hours on high / 3 hours on med. / 22 hours on low.

Beam distance: 705ft, • Lithium Ion battery capacity: 2400 mAh, Li-Ion 7.4V • Length: 9 3/4”. Includes $10 CVS Gift Card

$189.00

FRee dominator 4 Piece hook and Pick

set (value $55)

$10.00

CVS Gift Card Included (Value $10)

hammers Guaranteed for Life!

Get to Know Chicago Pneumatics High Performance Engineered Tools with Great Value Add Offers!

cP7759q1/2” composite carbon Fiber impact WrenchThe Most Innovative 1/2”” Impact Wrenchin its Class!• Carbon fiber and creative design improves

comfort, durability & productivity • Lightweight with a magnesium clutch

housing • 780 ft.lbs of maximum torque in reverse • Universal & Durable twin hammer

mechanism FREE Angle Die Grinder with purchase

$368.31

FRee Angledie Grinder(value $85)

cP717Kheavy duty .498 shank Air hammer KitMost powerful CP Air Hammer for Automotive, Truck and Off Road Equipment.

• 498” diameter chisel shank to handle the extra power • Stroke: 2.69”; 3/4”, piston stroke length, 1800 bpm • Length: 9.75”; weight: 4.75 lb. • Positive action trigger for precise control • Includes 4 piece .498 chisel set and a spring style retainer all packed in a heavy duty carry case. FREE CP7125 Needle Scaler with purchase

$899.95

FRee needle scaler

(value $175)

FRee

SPRING SPECIALS

Long Reach Angled Nozzle Blow Guns

Air Blow Guns help Remove dust and debris quick and safe

Specially designed angled nozzle accesses hard toreach places Ideal for cleaning applications• Ergonomically designed for

better comfort & air control • High impact, insulated

plastic handle has hang up slot Lever action, • Rubber Nozzle prevents surface damage

Item # Size Sale

TA99400 4” $9.82

TA99410 13” $12.47

TA99420 20” $13.96

TA99150 $16.44

TA99190

in Line BLoW GunMounts permanently in line

between air hose and coupler

• Non-marring rubber tip$21.49 TA99210

2 in 1 BLoW Gun & tiRe inFLAtoRSpecially designed combination safety nozzle for tire inflation and general purpose air blowing

• High impact, plastic handle with hang up hooks• When using as a tire inflator, a minimum of 90 PSI is required

$14.28

5 Piece PocKet BLoW Gun Kit• Rubber tip provides a leak free seal and will

not mar painted surfaces• Tapered nozzles concentrate air and permit

access to confined areas.

Date post:	22-Mar-2016
Category:	Documents
Upload:	the-nations-automotive-tool-box
View:	278 times
Download:	7 times

The Nation's Automotive Toolbox Spring 2013

Documents