+ All Categories
Home > Documents > The New Super 7 Spray Dryer

The New Super 7 Spray Dryer

Date post: 17-Mar-2022
Category:
Upload: others
View: 7 times
Download: 0 times
Share this document with a friend
2
The New Super 7 Spray Dryer
Transcript
Page 1: The New Super 7 Spray Dryer

The New Super 7 Spray Dryer

Page 2: The New Super 7 Spray Dryer

The New Super 7 Spray DryerEstablished for over 25 years, Labplant UK manufacturer quality, easy to use, all in one, laboratory scale, spray dryer solutions. Due to the continual development of our machines we have now added the SS-07A & AG Super 7 to our range.

We took the tried and tested design of our flagship SD-06 units, which produce a powder sample yield of between 1000 – 1500ml/ph, we experimented by replacing some of the major components to enable us to produce powder sample yields of up to 2000ml/ph.

After taking in to consideration the cost and performance of the modified components, we settled on a unit that gives us a good balance of power and affordability.

The difference between the SD-06 range & SS-07 range is not just the extra volume of sample yield, we now can offer a modified cyclone that enables the use of bag collection instead of the standard 1000ml sample bottle. Also the SS-07 range are only 5Kg heavier and 5cm taller, using the same footprint.

For further information, quotations or advice please contact us at:

Labplant UK Limited, Hunmanby Industrial Estate, Hunmanby, Filey, North Yorkshire YO14 0PHTel: +44(0)1723 892262 Fax: +44(0)1723 890872 Email: [email protected] www.labplantuk.com

Specification

Suitability

Type

Drying capacity

Temperature range accuracy            

Dried air volume range          

Spray air pressure range        

Feed pump volume range          

Inlet temperature setting    

Outlet temperature display                       

Dried air flow rate setting    

Feed pump flow rate setting    

Sprayed air pressure range          

Sprayed air line cleaning device

Additional function             

Recorder output terminal       

Heater                          

Feed pump                       

Spray nozzle                           

Air pump for spray              

Drying chamber             

Cyclone

Sample collection bottle                  

Suction blower                  

Maximum air pressure

Exhaust diameter             

De-blocking interval timer                  

Operational ambient temperature

Overall dimensions

Weight

Power requirement

Aqueous

2 way spray type nozzle 

Maximum approximately 1500-2000ml/h

50° – 250°(Temperature at inlet) ±1%

15 – 50m³/hr

2 – 2.8 Bar

60 – 2000ml/h

Touch screen controlled

Digital

Touch screen controlled

Touch screen controlled

2m³/hr @ 2 bar – 1.7m³ @ 4 bar

Automatic interval timer                 

Pump on/off

RS232 connection

4kW

Variable speed peristaltic pump                         

0.5mm fitted as standard  

Incorporated

Borosilicate glass               

Borosilicate glass               

Hard glass (1000ml as standard)        

Touch screen controlled

70mbar

O/D 50mm   

Touch screen controlled @ 1,4 & 9 sec.

5° – 35°           

1210 x 825 x 600mm

85kg

AC 220/240V 50/60Hz 23A

Aqueous & Solvent

2 way spray type nozzle 

Maximum approximately 1500-2000ml/h

50° – 250°(Temperature at inlet) ±1%

15 – 50m³/hr

2 – 2.8 Bar

60 – 2000ml/h

Touch screen controlled

Digital

Touch screen controlled

Touch screen controlled

2m³/hr @ 2 bar – 1.7m³ @ 4 bar

Automatic interval timer                 

Pump on/off

RS232 connection

4kW

Variable speed peristaltic pump                         

0.5mm fitted as standard  

Incorporated

Borosilicate glass               

Borosilicate glass               

Hard glass (1000ml as standard)        

Touch screen controlled

70mbar

O/D 50mm   

Touch screen controlled @ 1,4 & 9 sec.

5° – 35°           

1210 x 825 x 600mm

85kg

AC 220/240V 50/60Hz 23A

SS-07AGSS-07A

New Antistatic & Amber coated glasswareEfficient collection of the sample powder is vital when spray drying, as often the material being used is expensive.

Typically a machine running with perfect settings for the diluted material running through it, will collect about 50% of the powder, the rest is usually lost through the exhaust due to the size of the particles.

If these optimal settings are not achieved, then the sample powder sometimes ends up not being fully dried and sticks to either the main drying chamber or the cyclone.

We are now able to offer our glassware made specifically with an antistatic coating which alleviates this problem neatly and efficiently.

This was in direct response to requests by our customers to help solve the problem.

The process is performed whilst manufacturing new glassware and cannot be added to glassware already made without the coating.

Amber glassware is also available for materials of a light sensitive nature and as with the antistatic coating cannot be added to glassware already made without the coating.

Screen 1

Screen 3

Screen 2

Screen 4


Recommended