16
50 OPERATING TABLE The Obstetrics & Gynaecology Specialist
obstetrics
& gynaecology
operating table
50OPERATING
TABLE
The Obstetrics & Gynaecology Specialist
50
22 3
the t50 from eschmann
Legs
Base
Features
Positioning
Accessories
1120
mm
(max
.)
720
mm
(min
.)
308 mm708 mm
1083 mm
Dimensions
Control
Contents
50
In terms of quality and reliability Eschmann operating tables are acknowledged
as being second to none, the very best in medical engineering technology
for over 100 years – our assurance for your complete confidence.
The Eschmann philosophy is one of working closely with the people who
matter the most - the surgical clinicians and operating theatre professionals
who use our world class products. This close cooperation allows us to
develop a range of operating tables featuring a host of benefits that
consistently exceed the exacting demands required in today’s
operating theatre environment.
50
44 5
Secure mattress fixingsMushroom caps provide a
simple secure fixing for
mattresses, without the need
for Velcro, allowing them to
be easily cleaned.
Articulating legsThe weight assisted leg sections make it easier
to achieve anatomical correct positioning.
See page 18 for full details
features & benefits
Easy clean tabletopAcrylic capped ABS tabletop prevents
fluid ingress, is easy to clean, impact
resistant and hard wearing.
Base cut outThe cut out in the table base
allows improved surgical
access and if required the
positioning of a ‘kick bowl’.
Built-in Override ControlA standby control panel is located on
the top of the column. This enables
full use of the table in
the event of handset loss.
50
66 7
t50 handset operation
Trendelenburg Reverse Trendelenburg
Height Down
Tilt Left
Break Down
Height Up
Tilt Right
Break Up
Main battery and standby battery indicators
Intuitive, clear control system
Rear profile
base features
Auto level
Power protection The integral back-up battery
provides protection in the unlikely
event of main battery failure.
Large castorsLarge castors allow
easy 360° mobility
Brake systemEasily operated, the 3 position brake system enables the parallel locking of the front
wheels to make it easy to push the table in a straight line whilst steering from the brake
(head) end. In ‘Castor’ mode the table wheels are free to rotate 360° making it extremely
easy to manoeuvre. In brake mode all four wheels lock to ensure optimum stability.
9
Patient positioned over backrest hinge for regional anaesthesia block
Table set at minimum height allows the patient to be positioned correctly,
ready for anaesthesia block and subsequent supine positioning.
Standard configuration with
articulated legs and pads
(81-620-03).
Specialist performance
The T50 from Eschmann has
been developed specifically
to meet the challenges faced by
staff in Obstetrics, Gynaecology and
Midwifery. Features such as increased
auto-level speed for emergency procedures,
single backrest movement into assisted
delivery and a design that requires little manual
handling of the patient make the T50 virtually
unsurpassed in this field.
the obstetrics & gynaecology operating table
50
1010 11
Supine position
Patient’s legs located in articulated leg sections in
preparation for lithotomy position.
Standard configuration with
articulated legs, boots and upper
pads in situ (81-620-03).
Lithotomy position using articulated legs and instrument tray
Position using articulating legs and with instrument tray
positioned into x-ray cassette tunnel.
Standard configuration with
articulated legs (81-620-03) and
instrument tray (81-345-06).
50
1212 13
Lithotomy position using articulated legs and instrument tray
Position using articulating legs and with instrument tray
positioned into x-ray cassette tunnel.
Lithotomy position with Trendelenburg
Position using articulating legs, giving clear
visualisation for Post Partum tear.
Standard configuration with
articulated legs (81-620-03) .
Standard configuration with
articulated legs (81-620-03) and
instrument tray (81-345-06).
50
1414 15
Assisted delivery position
Patient positioned with articulating legs with back rest raised for patients
bearing down as aid for assisted ‘ventouse’ or forceps deliveries.
Standard configuration with
articulated legs and boots
(81-620-03).
Assisted delivery position
Patient positioned with articulating legs with back rest raised for patient’s
bearing down as aid for assisted ‘ventouse’ or forceps deliveries.
Standard configuration with
articulated legs and boots
(81-620-03).
Intuitive ControlBackrest raised to assisted delivery
position using single button operation
Backrest raised to assisted delivery
position using single button operation
50
1616 17
Supine position with left lateral tilt
Patient positioned incorporating side supports with left lateral tilt applied to
tabletop for Caesarean section to avoid pressure on the Vena Cava.
Tilt Control
Left lateral tilt highlighted
for Caesarean section
Supine position
Patient positioned using articulating legs with pads.
Standard configuration with
articulated legs with pads
(81-620-03).
Auto levelIncreased speed auto
level function
50
1818 19
articulating legs
Weight assisted movementSpecially designed weight assisted
gas springs ensure smooth
movement of the patient’s leg.
BootsThe articulated leg boots provide excellent
support to the patients feet and lower leg.
Safety catchesThe safety catch on the lower leg section
prevents the lower pad or boot from accidently
coming off, enhancing patient safety.
Quick release thigh padsThe upper pads have a quick release and
auto locking feature to enable quick and
easy configuration.
The articulating leg sections allow the patient
to be placed into the correct anatomical
position, quickly and easily.
50
2020 21
Supine position
Patients perineum positioned over the perineal cutout, with legs located in direct
placement leg holders to facilitate easy transition to lithotomy position with out
any patient movement relative to tabletop.
Standard configuration with
light weight leg (TA-030-1055)
and direct placement legholders
(81-272-10).
Flexibility & choice
The T50 operating table can
be configured for use with
direct placement legholders
(DPLH) and lightweight leg as an
alternative for lithotomy and
assisted delivery positioning.
alternative positioning With direct placement leg holders
50
2222 23
Lithotomy position
Patient positioned with direct placement leg holders. .
Standard configuration with
direct placement legholders
(81-272-10).
Lithotomy position
Patient positioned in lithotomy ready for removal of lightweight leg
section to provide access for the surgeon.
Standard configuration with
light weight leg (TA-030-1055)
and direct placement legholders
(81-272-10).
50
2424 25
configuration flexibility
1. Direct placement legholders - 81-272-10
2. Articulated leg sections with boots & pads - 81-620-03
3. Light weight leg section kit - TA-030-1055
Lightweight leg section with 25mm mattress.
Actual weight is just 4.5kgs.
4. T series instrument tray - 81-345-06
5. Short trunk side support - 81-368-57 & Backrest side support - 81-368-66
6. Standard T Series Leg section* - T00-321-0001
7. 50mm mattress for standard leg section* - T20- 441-2095
8. Footrest/Extension (complete with 50mm mattress)* - TA-020-3037
* Components 6,7 and 8 (not shown) can be used as an aleternative to the lightweight leg section.
1
2
3
4
5
The T50 can be supplied in various configurations
including; articulated leg sections, which are complete
with all pads and boots. Alternatively a lightweight leg
sections with the aid of direct placement leg holders
can be used to correctly position the patient.
50
2626 27
dimensions & movements
1070
mm
(max
.)
670
mm
(min
.)
308 mm708 mm
1083 mm
45°
45°
35°
35°
90° NOTrecommended
45° Max.recommended
18°18°
Trendelenburg and reverse Trendelenburg movements
Length and height dimensions
Head flap movements
Backrest movements
Lateral tilt movements
600 mm
1083 mm
The recommended movement required
for patients is approximately 45
degrees. Reverse trend movements
to be avoided when back rest raised
at this level and patient is or around
225kg limit as this will affect the
weight bearing loads of the table.
Tabletop dimensions
Please note - all dimensions are nominal and exlude mattresses
50
2828 29
ordering information
80-900-55 T50 operating table with articulated leg sections, 50mm mattress,
corded handset, UK mains cable and UK sidebars
80-900-19 T50 operating table with 50mm mattress, corded handset, UK mains
cable and UK sidebars (without leg sections)
80-900-64 T50 operating table with articulated leg sections, 50mm mattress,
corded handset, Euro mains cable and Euro sidebars
80-900-28 T50 operating table with 50mm mattress, corded handset, Euro
mains cable and Euro sidebars (without leg sections)
81-620-03 Pair of articulated legs T series operating tables
complete with pads and boots
TA-030-1055 Light weight leg section kit comprising of light
weight leg section and 25mm mattress set
T00-321-0001 Standard T Series Leg section
T20- 441-2095 50mm mattress for standard leg section
TA-020-3037 Footrest/Extension (complete with 50mm mattress)
81-272-10 Direct placement legholders
81-269-07 Bariatric direct placement legholders
TA-030-5161 Infill section (without mattress)
TA-050-1129 50mm mattress for infill section
81-368-66 Side support for T50 (upper trunk)
81-368-57 Side support for T50 (lower trunk)
81-345-06 T series instrument tray
• Powered operating table, suitable for use in obstetrics and gynaecology
• Maximum patient weight of 300kg in supine and lithotomy position
• Large wheels for easy table positioning and complete 360° mobility
• Covers are made of impact resistant acrylic capped ABS
• Base cover cut-out allows improved surgical access for theatre staff
• One button control system for removal of head and infill sections
• Single movement for ‘Assisted Delivery’ position
• 3 position, single pedal control for braking, steering and manouvrability
• Shorter tabletop length of 1083mm
• Full length radiolucent top with integral X-ray cassette tunnel
• Seamless, “Velcro-free” mattresses
• Battery status indicators on handset and table base
• Weight assisted articulated leg sections
general specification
ServiceEschmann products are supported by a worldwide network of
fully trained engineers, offering high quality Eschmann spare
parts. For further information on the range of Service
Contracts available, please contact your local
Eschmann representative.
Shipping InformationNet Weight 195kg
Gross Weight 290kg
Export Case dimensions 168cm x 102cm x 101cm
Imagery in this publication has been taken to illustrate the operating table movements and as such does not constitute a guide to correct patient positioning.
All T50 operating tables are CE
marked in compliance with the
Medical Device Directive 93/42/EEC
All products are latex free.
general information
Eschmann Holdings Ltd, Peter Road, Lancing, West Sussex, BN15 8TJ.
The details given in this publication are correct at time of going to press. The ‘Eschmann’ name and logo are trade marks of Eschmann Holdings Ltd.
‘Eschmann Equipment’ is a trading name of Eschmann Holdings Ltd.
Tel: +44 (0) 1903 753322Fax: +44 (0) 1903 875789
www.eschmann.co.uk
PS 5
10 0
2/20
09
Innovation. Technology. Confi dence.
50
