THE ONE MILL DESIGNED FOR IPS e - Ivoclar Vivadent€¦ · For: Inlays, onlays, veneers and crowns...

THE ONE MILLDESIGNED FORIPS e.max ®

April / May 2018

Connected to youwww.ivoclardigital.com

www.ivoclarvivadent.com.au 2

Programat® CS4

Glazing, crystallisation and sintering furnace

Programat® CS2

Glazing and crystallisation furnace

with colour touch screen

Glazing and crystallisation furnace with

colour touch screen and Digital Shade

Assistant

Programat® CS3

15 min. 15 min. 17 min. 37 min.IPS e.max® CAD IPS e.max® CAD IPS e.max® CAD IPS e.max® ZirCAD

Speed Programme

CAD/CAMchairside

Telio® CAD

IPS e.max® ZirCAD

IPS Empress®

Tetric CAD®

CAD

Zirconium oxide ceramics (ZrO2)For: Crowns and bridgesStrength: Up to 1,200 MPa

Leucite glass-ceramics

Aesthetic composite block

For: Inlays, onlays, veneers and crowns


Strength: 272 MPa

Strength: 185 MPa

NEW

NEW

IPS e.max® CADLithium disilicate glass-ceramics (LS2)For: Crowns, bridges, inlays, onlays, veneers, partial crowns and implant-supported hybrid restorationsStrength: 530 MPa

Cross-linked PMMA materialFor: Temporary crowns, bridges and hybrid abutment crowns Strength: 130 MPa

Everything for chairside CAD/CAM restorations

Ground breaking innovations.Proven solutions.Natural aesthetics.

Programat®

For optimum firing results

All Ceramic

FREE PUMP

FREE PUMP

SPECIAL PRICE

CALL USFOR A PRICE TODAY!645986EA

SPECIAL PRICE


SPECIAL PRICE


* Applies to all CAD blocks. Free item of equal or lesser value.

SPECIAL OFFER

Buy 5, get 2 FREE!*

Ph: 1300 486 2523

Programat® CS4

Glazing, crystallisation and sintering furnace

Programat® CS2

Glazing and crystallisation furnace

with colour touch screen

Glazing and crystallisation furnace with

colour touch screen and Digital Shade

Assistant

Programat® CS3

15 min. 15 min. 17 min. 37 min.IPS e.max® CAD IPS e.max® CAD IPS e.max® CAD IPS e.max® ZirCAD

Speed Programme

For your most aesthetic requirements The Dental Advisor gives Top rating for IPS e.max PressAfter a clinical evaluation period of seven years, the noted US-based dental test institute The Dental Advisor selected IPS e.max Press for the “Long-Term Performer: Ceramic” award!

CAD/CAMchairside

Telio® CAD

IPS e.max® ZirCAD

IPS Empress®

Tetric CAD®

CAD

Zirconium oxide ceramics (ZrO2)For: Crowns and bridgesStrength: Up to 1,200 MPa

Leucite glass-ceramics

Aesthetic composite block



Strength: 272 MPa

Strength: 185 MPa

NEW

NEW

IPS e.max® CADLithium disilicate glass-ceramics (LS2)For: Crowns, bridges, inlays, onlays, veneers, partial crowns and implant-supported hybrid restorationsStrength: 530 MPa

Cross-linked PMMA materialFor: Temporary crowns, bridges and hybrid abutment crowns Strength: 130 MPa

Everything for chairside CAD/CAM restorations

2018TOP AWARDWINNER

Full report: https://www.dentaladvisor.com/evaluations/ips-e-max-press-5-yr-2018-product-award/

All Ceramic

Tetric CADThe Aesthetic Composite Block

Tetric CAD is an aesthetic composite block for efficiently manufactured single-tooth restorations. Due to their exceptional chameleon effect, Tetric CAD restorations adapt harmoniously to the surrounding tooth substance. After milling, the restoration is polished and adhesively seated. This process is very efficient and leads easily and quickly to an aesthetically pleasing result.• 5x MT shades & 4x HT shades• Sizes C14 & I12 • Proven stability in their layer thicknesses


Cementation

SpeedCEM® PlusThe self-adhesive resin cement

SpeedCEM Plus is a self-adhesive, self-curing, resin cement with optional light-curing, offering an ideal combination of performance and user-friendliness.

Not every restoration can be completely and evenly cured with light. Strong self-curing capabilities offer an additional measure of reliability when seating opaque or non-translucent restorations. SpeedCEM Plus produces high bond strength values on zirconium oxide, base metal alloys and on dentine without light activation. This has been confirmed in internal and external studies.

SpeedCEM Plus is used for the permanent cementation of crowns and bridges on natural teeth and on implant abutments:

• Oxide ceramics such as zirconium oxide, e.g. IPS e.max® ZirCAD• Metal and metal-based restorations• Lithium disilicate glass-ceramics, e.g. IPS e.max®

A BIG PLUS

FOR ZIRCONIAIdeal for

IPS

ZirCAD

®

e.max

Refills

1x Automix syringe SpeedCEM Plus, 9g15x Mixing tips, 5x Root canal tips681710WW SpeedCEM Plus Refill, Yellow681711WW SpeedCEM Plus Refill, Opaque681712WW SpeedCEM Plus Refill, Transparent

Refill pack of 3 - Transparent

3x Automix syringes SpeedCEM Plus, 9g45x Mixing tips, 15x Root canal tips692422WW SpeedCEM Plus Refill, Transparent 3x 9g

• Zirconia restoration should be treated* as per manufacturer’s instructions.

• After try-in, apply Ivoclean to the internal surface of the restoration and let stand for 20 sec.

• Rinse and dry.

• No primer is needed for SpeedCEM Plus on zirconia.

• Apply SpeedCEM Plus cement directly into the restoration.

* Generally performed by the laboratory.

Adequate retention is required.

Remove residue of temporary cement• Clean the tooth preparation with a

polishing brush and Proxytprophy paste.

® fluoride-free

• Rinse & lightly dry. Avoid overdrying.

After try-in: clean the preparation• In case of saliva contamination, please

clean again.

• After seating, light-cure each quarter surface for 1 sec. The cement will achieve a gel-like consistency for easy clean-up.

• Excess material can be easily removed with a scaler.

• Utilise Liquid Strip to avoid oxygen-inhibited layer.

• Light-cure all margins for 20 sec.

• Rinse off Liquid Strip.

• Finish the proximal surfaces and polish the restoration margins with e.g. OptraPol.

PREPARE CLEAN & CEMENT CLEAN UP FINAL CURE FINISH

+ Excellent self-cure performance + User-friendly with easy clean-up + Efficient process with just one component

CONTAINS

MDP

Yellow Opaque Transparent

NEW!

3 X 9G SYRINGE

CALL USFOR A PRICE TODAY!

9G SYRINGE


SAVE25%

Ph: 1300 486 2525

SAVE20%

Cementation

Ivoclean®

For the effective cleaning of indirect restorations

The bonding action of adhesive and self-adhesive systems can be impaired if the restoration is contaminated with saliva after try-in. Cleaning with water, alcohol or phosphoric acid does not always produce the desired clean bonding surface. Ivoclean effectively cleans the contact surfaces, creating ideal conditions for achieving a reliable bond between the luting material and restoration.

Recommended

for use with

SpeedCEM PlusRecommended for

Zirconia

clean water phosphoric acid Ivoclean

70

60

50

40

30

20

10

0Lithium disilicate(IPS e.max CAD)

Tensile bond strength in MPa after 24 hours(Multilink Automix and Monobond Plus)

Zirconium oxide(IPS e.max ZirCAD)

Following saliva contamination cleaned with: R&D Ivoclar Vivadent AG,Schaan, Liechtenstein, 2011

Multilink® Hybrid AbutmentThe specialist in cementing Abutment Solutions

• Establishes a strong, durable bond in combination with Monobond Plus • Two levels of opacity for optimum aesthetics • Easy handling due to the convenient Automix syringe• 647182AN – High Opacity

647183AN – Medium Opacity

MO 0 HO 0

Hybrid abutment crown cemented with Multilink Hybrid Abutment HO 0 (2) compared to a crown cemented with a luting material featuring regular opacity (1).

Multilink Hybrid Abutment is applied to the titanium base.

In addition to the opacity level MO 0 used in the past, Multilink Hybrid Abutment is also available in a highly opaque HO 0 shade. This shade ensures an optimum aesthetic outcome even in challenging cases, such as the cementation of IPS e.max® LT hybrid abutment crowns on titanium bases.

Monobond PlusUniversal primer for all restorative materials

• Strong and durable bond• Universal reaction time of 60 seconds• Can be stored at room temperature

5G BOTTLE

CALL USFOR A PRICE TODAY!626221AN

9G SYRINGE


5G BOTTLE


SUPERSPECIAL


Light Curing

Bluephase® Meter IIDental radiometer

Bluephase® Meter II is a precise radiometer for easy verification of curing light intensity.

With the help of the Bluephase® Meter II, the light intensity [in mW/cm2] as well as the light power [in mW] can be measured quickly and accurately at any time. Readings are obtained in three simple steps: Measure the diameter of the light probe using the template on the back. Enter the value and illuminate the sensor.

Bluephase® Meter II is suitable for all types of curing lights.

An insufficient light cure can have two possible causes:

1. The light intensity emitted by the curing light is inadequate (e.g. because of a technical defect)

Check the light intensity regularly using a reliable measuring device (radiometer) such as a Bluephase® Meter II to be sure that you are getting the correct amount of light. As the light intensity is always measured in relation to the light emission window, the diameter of the light guide should first be determined and then entered into the radiometer. If the curing light emits a light intensity of less than 400 mW/cm2, we recommend buying a new one.

2. The initiator system of the filling material

Some composites respond to a different wavelength range than the one covered by your curing light. You should make sure that the emission spectrum of your curing light matches the relevant wavelength range of the product you are using. Universal curing lights covering a broad wavelength range (385 – 515nm), such as the Bluephase® Style with integrated polywave technology, are especially useful here.

Note: Fillings that are not properly cured may cause postoperative sensitivities. We therefore recommend that you should measure the light intensity of your curing device at least twice a year because you will not be able to see, with the naked eye, if the light intensity of your curing device is too low.

The template on the rear of the radiometer assists in determining the diameter of circular light guides.

The size of the diameter is then entered into the radiometer.

The digital display is activated automatically when the curing light is switched on.

Contact your local Territory Manager for a FREE light testing demonstration

SPECIAL PRICE

CALL USFOR A PRICE TODAY!667124

Ph: 1300 486 2527

Ivoclar Digital

It’s never been easier to get your practice digital ready!

Equipment | CAM

Material

Scanners | CAD

Equipment | CAM

Material

Scanners | CAD

Equipment | CAM

Material

Scanners | CAD

*Trade up to: TRIOS 3 Pod, TRIOS 3 Cart, TRIOS Pod, TRIOS Cart.Trade in: Apollo/Red Cam, Blue Cam/Omnicam, iTero, 3M True Definition, Lava C.O.S. , MHT, Lythos, Orametrix Ora-scanner, IOS scanner, PlanScanConditions apply.

TRADE your old Intra-oral Scanner*

PrograMill OneThe compact, 5-axis milling machine designed to mill beautiful, aesthetic IPS e.max® restorations.

• Take control of your patient’s restorations in a single visit. • Innovative 5- axis Technology provides short milling times. • App driven for easy operation and high automation.

Materials – more optionsLithium disilicate, zirconium oxide, PMMA and composite – all these material blend seamlessly into your digital work routines.

TRIOS® MOVE The brand-new hardware setup places the 3Shape TRIOS® scanner, monitor and PC on the lightweight, fully-adjustable, ergonomic 3Shape TRIOS® MOVE. 3Shape TRIOS® MOVE mobility enables doctors to always position the screen in the right place to provide a superior experience for both dentist and patient.

Contact one of us today on 0508 486 252 to organise a demonstration, and see how easy it is to go Digital

NEW!

UP TO $19,000

+GST*

8 FULL

TIME TEAM

MEMBERS in

Australia and

New Zealand


You choose…

Prosthetics

Choose to make your patient smilewith Ivoclar Vivadent teeth

Ivoclar Vivadent

Teeth

SR Vivodent S PE/S DCL

Ivostar/Gnathostar

SR Phonares IIS PE in 20 Pearl Effect shades

S DCL In 16 A–D and 4 Bleach shadesExceptional lifelike aesthetics

Premium quality

Innovative tooth mould concept - soft or bold - youthful, universal or mature

Available in A-D and Chromascop shades

Harmonised layering of PMMA structure

The economically optimised selection

SR Phonares II & SR Vivodent

S PE / S DCL are integrated into

Ivoclar Vivadent’s Digital Workflow

SPECIAL PRICE


SPECIAL PRICE


SPECIAL PRICE


LMG Phonares II Anterior A2

LMG SR Vivodent S PE

LMG SR Vivodent S DCL

NEW!

* Terms & Conditions apply.

Buy on consignment • Have your working stock on hand

– WITHOUT ANY OUTLAY• Patients get to see and

choose the teeth they like• Pay as you use

Trade-in deals… Why not clean out your old competitor stock?

Buy 50 sets, Trade 50 sets, GET 50 sets FREE*

Ph: 1300 486 2529

Two tooth lines –one aesthetic result

Anterior tooth characteristicsDesigned by nature, tried-and-tested a million times over

The anterior moulds are designed to meet the essential requirements that every modern denture tooth should fulfil:

Harmonious enamel covering on all sides, providing room for creativity in the setup of anterior teeth

Wide tooth neck to cover structural elements

Specially designed interdental closures for enhanced white aesthetics

SR Vivodent S PE20 PE shades

SR Vivodent S DCL16 A–D and 4 Bleach shades

The PE shades reflect the shade characteristics typically found in older patients.

A–D and Bleach shades are frequently used in combination prosthetics.

Prosthetics

NEW A-D SHADES

SAVE 40%662637

SR Vivodent S PE Shade Guide

SAVE 40%685572

SR Vivodent S DCL Shade Guide

Ask your Laboratory for Ivoclar Vivadent Denture Teeth

SR Vivodent® S PE | DCL

Simply brilliant!

INTRODUCTORY OFFER

SAVE 40% across the new SR Vivodent S DCL tooth line.* "Today’s patients place a great deal of value on aesthetics. That’s why I use SR Vivodent S PE – for a successful combination of naturalness and strength."

Pasquale Lacasella, Italy

* Excludes SR Vivodent S PE.


Adhese® UniversalUniversal adhesion with advanced delivery

How do you know when dentine is wet enough for bonding?After the etching procedure, the exposed collagen fibres on the dentine surface should be encapsulated by a homogeneous and thin layer of adhesive to achieve a stable bond to the tooth. For this to happen, the tooth surface must not be overly dry. Otherwise, the collagen fibres may collapse. Collagen collapse is a phenomenon that may occur after phosphoric acid etching as the collagen fibres are exposed. The collagen fibres cannot be seen by the naked eye. It is therefore difficult to evaluate if or when the dentine surface has become too dry.

Some adhesives fail to infiltrate over dried collagen fibres properly and this may lead to a significant reduction in bond strength. Adhesives such as Adhese® Universal are based on a combination of water and ethanol as the solvent to restore moisture to collagen fibres that have collapsed because of desiccation.

This type of adhesive is suitable for both wet and dry bonding techniques.

Suitable for direct and indirect restorative applications.

Collagen fibres are in a vertical position if an adequate degree of moisture is present

on the dentine surface.

Collagen fibres collapse if the dentine has become excessively dry.

The universal adhesive Adhese® Universalmoistens collapsed collagen fibres evenly.

* Includes: 100 VivaPen snap-on cannula brushes, 20 VivaPen protective sleeves

Restorative

SAVE25%

5G BOTTLE

CALL USFOR A PRICE TODAY!663720WW

2ML VIVAPEN*

CALL USFOR A PRICE TODAY!664504WW

Ph: 1300 486 25211

Photos: Dr Eduardo Mahn

Build-up of the palatal enamel wall with Enamel material

Dentine core and mamelons

Incorporation of special effects

between mamelonsand on the incisal edge

Final (top) enamel layer

Final incisal layer with translucent Effect material

Intuitive layering system for highly aesthetic resultsults

emoceb nac enoynAa master at creating

highly aesthetic composite restorations

in only five steps.Dr Eduardo Mahn, Director Clinical Research,

Universidad de los Andes Santiago, Chile

“ “

Enamel materials

Dentine materials

Translucent materials, flowable Effect materials

R&D Ivoclar Vivadent AG, Schaan, 2016

IPS Empress® DirectHigh Aesthetics, Easy Handling

IPS Empress® Direct - the highly aesthetic anterior and posterior filling material is available in 32 colours to create a variety of anatomical features and replicate nature.

The shade system logically follows the anatomical structure of the tooth:

• 13 opaque dentine shades for reproducing dentine and mamelon areas, and for placing cervical fillings in older patients

• 16 translucent enamel shades designed for replacing enamel• 3 highly translucent materials for characterisation on the incisal edges

– Translucent Shades (Flowable ‘Effect’ Shades) – Enamel Shades – Dentine Shades

Now with optimised handling characteristics:

• Cavifil contents are easy to extrude• Material does not stick to the instrument• Excellent adaptation to the cavity walls• Outstanding polishability

Opaque

0.5 mm1 %

DentineA2

7– 8 %*

EnamelA2

13 –15 %*

Trans20

20 %*

Trans30

30 %*

TransOpal

45 %*

* Sample value, Technical Data Sheet, Ivoclar Vivadent AG

Highest quality starts with simplicity

Due to the logical arrangement of the shade system, IPS Empress Direct is incredibly easy to use. Dentine replaces dentine and enamel replaces enamel. The extensive shade range comprises a suitable combination of materials for all clinical shade requirements. Two autoclavable shade guides assist in the selection of the precise enamel and dentine shade.

HIGH AESTHETICSEASY HANDLING

* Must all be on one invoice. While stocks last. Free item to be equal or lesser value & must be same delivery form. Does not apply to IPS Empress Direct Effects or Color.

Restorative

SPECIAL OFFER

Buy 4, get 1 FREE!*

10 X 0.2G CAVIFILS

CALL USFOR A PRICE TODAY!627258AN – 627288AN

3G SYRINGE



Clinical Accessories

Astropol® Composite PolishingThe Astropol polishing system is a comprehensive finishing and polishing set that embraces three grit sizes and four differently shaped polishers for interdental and occlusal applications:

Astropol F (Finish)For the removal of excess material and pre-polishing applications.

Astropol P (Polish)Is designed for the polishing of restorations. Astropol P ensures a smooth surface finish and helps achieve first-class results particularly in conjunction with micro-filled composite materials.

Astropol HP (High-gloss Polish)Ideal for creating smooth, highly lustrous surfaces. These polishers are particularly recommended for hybrid composites such as IPS Empress® Direct, Tetric® EvoCeram or Tetric® EvoFlow.

Step 1: Finishing with Astropol F

Finishers or Polishers(Grey or Green)

High Gloss Polishers(Pink)

Contains: 12x Finishers, 8x Polishers, 4x High Gloss

Polishers

Step 2: Polishing with Astropol P

Step 3: High gloss polishing with Astropol HP

Optrasculpt® PadA contouring instrument with special foam pad attachments, designed for the efficient, non-stick forming and shaping of composites.

Also ideal for holding indirect restorations in place during polymerisation.

• Faster contouring due to non-stick attachments• Reduced effort required for finishing and polishing• Reduced adhesion of the composite to the instrument• No instrument marks on the restoration surface• Suitable for the build-up of direct veneers or large Class IV restorations

Kit contains: 1x instrument, 60x 4mm & 60x 6mm refills

As recommended by Dr Stefan Koubi

Virtual®

A hydrophilic precision VPS impression material offering exceptional detail reproduction and an efficient balance of physical properties.

• Excellent adaptation to the moist oral hard and soft tissues• Easy to read colour combination• Flexible working times and fast setting phase• Outstanding balance of physical properties• High level of stability for multiple pours• High tear strength• Excellent moisture displacement• Exceptional readability and precision• Fresh peppermint scent• No special activation required • Quick dispensing of ready-mixed material • Available in Fast or Regular set

Extra Light Body, Light Body, Monophase, Heavy Body

* Excludes Virtual CADBite

2 X 50ML


REFILL PADS

CALL USFOR A PRICE TODAY!639792AN 4mm 639793AN 6mm

ASSORTMENT KIT


PKT 6

CALL USFOR A PRICE TODAY!557614 – 557621

PKT 3

CALL USFOR A PRICE TODAY!557622 – 557624

ASSORTMENT KIT


Buy 2, Get 1 FREE!*

SAVE25%

Ph: 1300 486 25213

Fluor Protector SSuperior protection against dental caries and erosion

This innovative varnish system features a homogeneous fluoride source ensuring immediate availability of the fluoride. The entire dose of fluoride contained in Fluor Protector S is available in a very short time and as a result, dental enamel is directly and effectively supplied with fluoride. Safe and effective for all ages.

Special propertiesFluoride and its concentration are not the only factors that provide clinical success. Properties such as the homogeneous distribution of its components (i.e. fluoride), depot formation, viscosity, flow and wetting properties, adhesion as well as aesthetics determine the quality of a fluoride varnish.

Homogeneous solutionFluor Protector S contains fluoride in a homogeneous solution, rendering it ready for immediate application. This is in contrast to inhomogeneous preparations which need to be mixed before use. In this case, it is difficult to ensure that the insoluble particles are evenly distributed.

Immediate fluoridation of enamelA homogeneously dissolved fluoride source with 7700 ppm ensures the entire dose of fluoride is available within a very short time. The fluoride concentration amplifies once dried (approx. 4-times higher concentration after setting).

High-Yielding fluoride depotAfter the application of Fluor Protector S, finely distributed calcium fluoride-like particles form on the teeth. During acid attacks, these particles break down into calcium and fluoride. The dense covering layer acts as a depot from which fluoride and calcium are released over an extended period. Consequently, the acids cannot directly attack the teeth.

Low viscosity for complex surfacesThe low viscosity of Fluor Protector S provides optimum flow and wetting properties. In contrast to thick, viscous fluoride varnishes, Fluor Protector S is easy to distribute. Furthermore, it readily flows into complex surface structures and is readily absorbed.

Fast and Effective Application

Fluor Protector S vs. the competitorsYou can clearly see Fluor Protector S is thin, clear and completely homogenous unlike the competitor varnishes.

* Not a registered trademark of Ivoclar Vivadent.

Fluor Protector S (Ivoclar Vivadent)

Vanish Varnish* (3M ESPE)

Profluorid Varnish* (VOCO)

White Varnish* (NUPRO®)

Fluor Protector S

Fluor Protector S Duraphat* Clinpro White Varnish*

Ml Varnish*

Fluo

ride

[µg/

cm2 ]

45

40

35

30

25

20

15

10

5

0

Focus on topical fluoride application

Alkaline-soluble fluoride on the enamel surface one hour after the application of various fluoride varnishes (Ivoclar Vivadent, R&D 2011)

*Not registered trademarks of Ivoclar Vivadent

Negative control

Bifluoride*10%

Immediate Availability of Fluoride

Is your

fluoride varnish

delivering as

promised?

A low-viscosity fluoride varnish such as Fluor Protector S spreads easily and penetrates into porous surfaces.

A high-viscosity fluoride varnish sits on the surface of the tooth. Absorption is poor.

Enamel surface High-viscosity fluoride varnish

Low-viscosity fluoride varnish

Enamel surface

A low-viscosity fluoride varnish such as Fluor Protector S spreads easily and penetrates into porous surfaces.

A high-viscosity fluoride varnish sits on the surface of the tooth. Absorption is poor.

Enamel surface High-viscosity fluoride varnish

Low-viscosity fluoride varnish

Enamel surface

Fluor Protector S

7G TUBE



MK-dent / FKG

FREE SCALING TIP

FREE DLC coated Black Scaling Tip 720347 / 720349 Valued at $95.50+GST with the purchase of any Prophy Line scaler handpiece.

INTRODUCTORY OFFER

SAVE 20% off RRP when you purchase a new Ecoline handpiece.

OFFER

SAVE 30% off RRP across the entire Total Fill range. Stock up with this great offer!

NON-OPTIC

$352+GST = $387.20EMS 719642 / SATELEC 719645

NON-OPTIC

$900+GST = $990

WITH LED

$539+GST = $592.90EMS 719643 / SATELEC 719646

WITH OPTIC

$1,050+GST = $1,155

Prophy LineUltrasonic scaler

• With 32,000 movements per second, the Piezo®-technology provides an oscillation behaviour equally to the tooth surface

• The linear movements of the scaler tip provide a maximum precision and comfort during treatment

• The LED-ring, consisting of 6 LEDs, allows a true-colour, glare-free and uniform illumination of the entire oral cavity

• Available with connections for EMS© and Acteon©/Satelec©

Eco LineRedband

• Red (1:5)• Max 200,000 rpm• Ceramic bearings• Safe-Tech Push button• 4 port internal water• For FG-burs (Ø 1.6mm)

Total Fill® Premixed bioceramic endodontic materials

• Utilises the moisture naturally present in dental tubules to initiate its setting reaction

• Biocompatible and osteogenic• Highly antibacterial (+12pH upon setting)• Highly radiopaque and hydrophilic• Also includes RRM + BC Sealer

SPECIAL PRICE

$190+GST = $209704812 Includes 1.5g syringe material and 15 x tips

NEW PRODUCT LAUNCH!

Ph: 1300 486 25215

Heine / Dürr Dental

Aluminium housing. Exclusive. Light Weight. Durable.

NEW! mPack mini. Smaller. Lighter. USB charging. 9 hours operating time.

NEW! Replaceable high quality connecting cord with a splashproof threaded connector.

i-View loupe mount. For any angle of view.

Shadow free. Through a compact coaxial design.

Unique HEINE LEDHQ

NEW! 55,000 Lux. Homogenous. True colour rendering.

MOST TRUSTED BY DENTISTS AND ENT SPECIALISTS

HEINE® MicroLight 2

Experience HEINE® LoupeLight 2 Brighter. Lighter. Improved functionality.

NEW !

> For ordering information, please see the last page or visit www.heine.com

MicroLight 2 on S-FRAME

MicroLight 2 on Lightweight Headband

Aluminium housing. Exclusive. Light Weight. Durable.

NEW! mPack mini. Smaller. Lighter. USB charging. 9 hours operating time.

NEW! Replaceable high quality connecting cord with a splashproof threaded connector.

i-View loupe mount. For any angle of view.

Shadow free. Through a compact coaxial design.

Unique HEINE LEDHQ

NEW! 55,000 Lux. Homogenous. True colour rendering.

MOST TRUSTED BY DENTISTS AND ENT SPECIALISTS

HEINE® MicroLight 2

Experience HEINE® LoupeLight 2 Brighter. Lighter. Improved functionality.

NEW !

> For ordering information, please see the last page or visit www.heine.com

MicroLight 2 on S-FRAME

MicroLight 2 on Lightweight Headband

CONTACT US TODAY FOR A DEMONSTRATION!

Mention this advertisement and receive 15% off RRP of Heine loupes and Loupelight.

Dürr DuoMembrane drying unit

• 2-cylinder V-motor and a 20 litre tank• For maximum 2 workstations

SPECIAL PRICE

$5,484.44+GST = $6,032.88708509

Tyscor VSSuction system

• VS Central Comb Suction with Radial Technology

SPECIAL PRICE

$4,714.82+GST = $5,186.30709457

VistaSCAN Mini PlusImage plate scanner

• Maximum image quality (22LP/mm)• Can process all intraoral formats; sizes 0-4

BONUS 8 Plates of your choice!

4 YEARWARRANTY

OPTION AVAILABLE

SPECIAL PRICE

$9,300+GST = $10,230706064

www.ivde.com.au 16

Carestream Dental

* Spend excludes GST. Voucher will be provided by Ivoclar Vivadent Territory Manager at time of install. T&C’s apply.

* Spend excludes GST. Voucher will be provided by Ivoclar Vivadent Territory Manager at time of install. T&C’s apply.

CS 1500Wireless intraoral camera

Available in both a wired and wireless version, the CS 1500 Camera was designed for mobility and ease of use• Widest focus range available• Featuring proven Wi-Fi technology

CS 1200Intraoral camera

• 1024 x 768 resolution• Store up to 300 images• The perfect tool for patient education leading

to more informed treatment decisions

SPECIAL PRICE

$5,780+GST = $6,358708967

SPECIAL PRICE

$2,652+GST = $2,917.20708973

BONUS $300 worth of Ivoclar Vivadent consumables!*

BONUS $200 worth of Ivoclar Vivadent consumables!*

Add Scanning to Your Surgery!

CS 3600Faster, easier, more open intraoral scanning is in your hands The CS 3600 puts smarter intraoral scanning in your hands, whether your practice handles restorative, orthodontic or implant cases, the CS 3600 adapts to your needs by making digital impression capture both fast and easy.

• Implant planning made easy• Open .STL and .PLY files allow you to use third-party design software• Sharing with the lab of your choice simple and straightforward

SPECIAL PRICE

$38,500+GST = $42,350708990 RRP $48,411+GST

BONUS LAPTOP!

Ph: 1300 486 25217

RVG 5200Intraoral sensor system

• Image acquisition fast and easy• Simply position, expose and view• Shock resistant and waterproof casing• A true resolution of 16 lp/mm (Measured)• High exposure range

Carestream Dental

SPECIAL PRICE FROM

$29,925+GST = $32,917.50708612

SPECIAL PRICE FROM

$50,925+GST = $56,017.50708623

SPECIAL PRICE FROM

$84,000+GST = $92,400737536

3 YEAR WARRANTY!*

5 YEAR WARRANTYAVAILABLE

CS 2100Intraoral x-ray system

• Affordable, feature-rich intraoral imaging• DC technology (Very High Frequency)

for dose reduction (up to 30%) and better control of exposure parameters: reproducibility and consistency

SPECIAL PRICE

$5,010+GST = $5,511

708390 – 170cm Short Arm 708389 – 188cm Standard Arm 708388 – 205cm Long Arm

CS 7200Intraoral imaging plate system

• Connect the compact and stylish unit directly to your computer via a USB connection and you’re ready to go

• Available in three plate sizes• Fast and easy to use

SPECIAL PRICE

$9,600+GST = $10,560705574

CS 7600Intraoral imaging plate system

• For all intraoral indications• True resolution 17 lp/mm (max)• “Scan & Go” technology• LCD colour monitor• Built-in memory

SPECIAL PRICE

$12,441+GST = $13,685705467

FEATURING NEW

SCAN & GO TECHNOLOGY

CS 2200Intraoral x-ray system

• Affordable, feature-rich intraoral imaging• DC technology (Very High Frequency)

for dose reduction (up to 30%) and better control of exposure parameters: reproducibility and consistency

3 YEAR WARRANTY!*


708387 – 170cm Short Arm 708386 – 188cm Standard Arm 708385 – 205cm Long Arm

SPECIAL PRICE

$5,688+GST = $6,256.80

SPECIAL PRICE FROM

$5,144 SIZE 1

+GST = $5,658.40S1 708592, S2 708600

RVG 6200Intraoral sensor system

• Exceptional image quality• A true resolution of 24 lp/mm (Measured)• Enhanced workflow• Enhanced image processing tools• Easy-to-use imaging software

SPECIAL PRICE FROM

$8,910 SIZE 1

+GST = $9,801S1 708574, S2 708575

CS 8100 AccessCompact panoramic imaging

The CS 8100 Access is a compact and simple system based on workflow integration, humanised technology and diagnostic excellence.• High-quality real-time digital results• Quiet, 10-second acquisition time• Includes workstation computer

CS 8100 3DSimple, sophisticated imaging

• Super-fast and simple operation• Ultra-compact unit that fits easily into

tight spaces and provides all the tools you need to work more efficiently

• CS adapt module• Includes workstation computer

CS 8100 SC 2DRecord-breaking speed

The world’s first cephalometric imaging technology and tracing software• Full tracing within 90 seconds• Two sensors are better than one• Includes workstation computer

*Terms and conditions apply.


*(1) Certain criteria and terms and conditions apply, please contact your local equipment specials for more information. *(2) Treatment Units: Product pictured may feature optional extras, components and colours may vary. Pricing shown is for standard configuration only. Includes chair, upholstery, delivery system, foot control, assistant’s module and overhead light. Does not include freight, installation, structural site modification, removal of existing unit, electrical compliance, plumbing and electrical work. *(3) Imaging Systems and X-rays: Installation not included, remote activation switch, networking, computers, network cabling or software upgrades not included. Site preparation, electrical compliance, compliance testing, base plate, removal and disposal of old unit and wall reinforcement not included. *(4) Autoclaves: Prices shown are for the product only and do not include freight, installation, or compliance testing. As standard unit manual drain & fill and does not include connection to a RO system. All Stern Weber Autoclaves subject to installation to a prepared site. *(5) General: Pricing not available to subcontractors. No further discounts apply. Offer valid while stocks last or until 31/05/18. Prices shown are for the product code only and additional accessories may need to be purchased depending on a clinics requirement. Works may be subject to local state and territory regulations and this is the responsibility of the purchaser. All equipment must be installed by an approved Ivoclar Vivadent technician. *(6) Carestream vouchers can be used as redemption through Ivoclar Vivadent Carestream product only.

Stern Weber

S200

PACKAGE INCLUDES

• 1 x Stern Weber SC-A2 non fibre optic Scaler (EMS tip equivalent) with 4 tips and 1 torque wrench

• 1 x Doctor’s T7 Stool • 1 x Assistant’s T8 Stool with extension • 6 x additional autoclaveable syringe tips• A starter pack of Dürr chemicals• Free installation• Includes freight*

S200 PACKAGE

$25,800+GST = $28,380709465, 709466

3 YEAR WARRANTY!*


S200All the essential elements in a compact space

The Stern Weber S200 integrated treatment centre is the result of adapting and evolving to bring you a dental unit designed for intensive use and to deliver in terms of performance, ergonomics and practicality.

• Includes electric motor (1,000-40,000 RPM / 3 Ncm), with LED light • Doctor console with LED display for instrument speed• Venus overhead light with integrated cooling system• International version available


Ph: 1300 486 25219

Stern Weber

S380TRcProviding unique comfort and accessibility

The desire to constantly improve and pursue technological progress has created the S380TRC, the ideal working space in perfect harmony with the way you work. The unique rotation of the S380TRC to the seated position makes it easier for patients to get on and off the chair. When discussing your treatment plan, excellent ergonomics allows you to talk with patients: face to face.

• Includes electric slow speed motor (100-40,000 RPM/5.3Ncm), with LED light, endo and implant settings

• Synchronised backrest and leg rest movement• Venus Plus LED silent overhead light 3,000-50,000 Lux• Available in International and Continental delivery

The treatment centre that gives patients more comfort and freedom.

3 YEAR WARRANTY!*


3 YEAR WARRANTY!*


S210LRDesigned for left and right dentistry - Built to work for you

S210LR can, in just a few quick moves, be converted from a right-handed dental unit to left-handed. The changeover can be made in just a few minutes, without the aid of any tools or technicians.

• Includes electric motor (1,000-40,000 RPM / 3 Ncm)

• Wide-range of high-tech accessories available to customise your ideal treatment centre

• 2 versions available – International and Continental

FROM

$22,500+GST = $24,750709471, 709472

FROM

$38,625+GST = $42,487.50 709468, 709470



HEAD OFFICE VIC, TAS & SA 1-5 Overseas Drive Noble Park North VIC 3174 Ph: +61 (0)3 9795 9599 Fx: +61 (0)3 9701 1998

NSW & ACT OFFICE 25 Cleg Street Artarmon NSW 2064 Ph: +61 (0)2 9436 0400 Fx: +61 (0)2 9460 9082

QLD OFFICE 3 / 53 Southgate Avenue Cannon Hill QLD 4170 Ph: +61 (0)7 3899 8500 Fx: +61 (0)7 3899 8599

WA & NT OFFICE 134 Charles Street West Perth WA 6005 Ph: +61 (0)8 9227 1555 Fx: +61 (0)8 9227 9855

ivoclarvivadent.com.au | ivde.com.au | 1300 486 252Valid 1 April — 31 May 2018 • Correct at time of print • Descriptions & data constitute no warranty of attributes. All discounts are off RRP unless stated otherwise. Equipment offers with consumables must be all on one invoice. Free goods of equal or lesser value. Ivoclar Vivadent reserve the right to amend incorrect pricing at our discretion.

Ivoclar Vivadent Professional Development 2018

The lecture will discuss the why’s and how’s to delivering optimally aesthetic direct composite veneers, using the freehanded technique. A large focus of the lecture will be actual case studies that will guide the clinician step-by-step. By the end of the lecture and hands-on programme, you should be more proficient in the handling of composite resin veneers achieve great aesthetics.

In this workshop, renowned dental clinician and educator Dr Andrea Shepperson will discuss the material advantages and limitations of composite and all-ceramics in the posterior space.

If you want to learn about the latest advances in materials and their use, then you don’t want to miss this workshop!

For more information, contact your Clinical Territory Manager directly, or Luke Vassallo on 1300 486 252

Australian Made Clear Aligner System

For more information, contact your Clinical Territory Manager directly, or Luke Vassallo on 1300 486 252

To register for these events, and to see the full calendar of courses and programmes for Australia, please visit: www.ivoclarvivadent.com.au/icdelearn

Mastering Posterior RestorationsDr Andrea Shepperson

Brisbane ICDE:Thursday 3 May 20181-Day Workshop

Minimally Invasive Direct Composite Veneers: How to achieve maximum aesthetics with minimum tooth damageDr Terry Wong

Melbourne:Friday 25 May 20181-Day Lecture

Friday 25 – Saturday 26 May 20182-Day Lecture & Hands-On

Date post:	31-Jul-2020
Category:	Documents
Upload:	others
View:	5 times
Download:	0 times

THE ONE MILL DESIGNED FOR IPS e - Ivoclar Vivadent€¦ · For: Inlays, onlays, veneers and crowns...

Documents