The Power Tool Accessory Specialist 2007 Catalog...These specially designed drills are excellent for...

(800) 228-0541 | 1

Jobber DrillsHeavy Duty DrillsCobalt DrillsS&D DrillsTaps & DiesScrew ExtractorsMasonry DrillsSDS DrillsSpline DrillsWood BitsShip AugersGlass DrillsForstner BitsBell Hanger BitsReciprocating BladesJig Saw BladesHole SawsPower Screwdriver Bits

Diamond BladesGrinding WheelsCore Bits

2007Catalog

The Power Tool Accessory Specialist

2 | (800) 228-0541

TABLE OF CONTENTS TO COME

Table ofContents

(800) 228-0541 | 3

General PurposeJobber Length Drills

TYPE J, JB Black BrightSIZE1/641/323/641/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

P/NJ-164J-132J-364J-116J-564J-332J-764J-18J-964J-532J-1164J-316J-1364J-732J-1564J-14J-1764J-932J-1964J-516J-2164J-1132J-2364J-38J-2564J-1332J-2764J-716J-2964J-1532J-3164J-12

Fractional Sizes, High Speed Steel,118° Point, Black (J) or Bright (JB)

PKG12121212121212121212121212121212121266666666666666

P/NJB-164JB-132JB-364JB-116JB-564JB-332JB-764JB-18JB-964JB-532JB-1164JB-316JB-1364JB-732JB-1564JB-14JB-1764JB-932JB-1964JB-516JB-2164JB-1132JB-2364JB-38JB-2564JB-1332JB-2764JB-716JB-2964JB-1532JB-3164JB-12

� Use on steel, wood and plastics.

Bull’s Eye SeriesPremium QualityJobber Length Drill SetsTYPE JBESIZES1/16" to 1/4"1/16" to 1/2"1/16" to 3/8"1/16" to 1/2"

1/16" to 1/2"

P/NDS-13BEDS-15BEDS-21BEDS-29BEDS-29BER 3/8" Shank

SET SIZE13 pieces15 pieces21 pieces29 pieces29 pieces

Bulk dispenser for all fractional Jobber Drills.

4 | (800) 228-0541

SIZE1/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

Bull’s Eye SeriesPremium QualityJobber Length Drills

TYPE JBEP/NJBE-116JBE-564JBE-332JBE-764JBE-18JBE-964JBE-532JBE-1164JBE-316JBE-1364JBE-732JBE-1564JBE-14JBE-1764JBE-932JBE-1964JBE-516JBE-2164JBE-1132JBE-2364JBE-38JBE-2564JBE-1332JBE-2764JBE-716JBE-2964JBE-1532JBE-3164JBE-12

Fractional Sizes, Self-Centering,Split Point Drills, Black & Gold Finish

PKG12121212121212121212121212121266666666666666

P/N CARDEDJBE-116CJBE-564CJBE-332CJBE-764CJBE-18CJBE-964CJBE-532CJBE-1164CJBE-316CJBE-1364CJBE-732CJBE-1564CJBE-14CJBE-1764CJBE-932CJBE-1964CJBE-516CJBE-2164CJBE-1132CJBE-2364CJBE-38CJBE-2564CJBE-1332CJBE-2764CJBE-716CJBE-2964CJBE-1532CJBE-3164CJBE-12C

� Hit the target with New England Twist Drill’sBull’s Eye Series of jobbers drills.

� These specially designed drills are excellent for drillingall types of steel, including stainless.

� 135° split point allows easy penetration and self-centering.� Great performance when used with cordless drills.� Unique black and gold finish.� Reduced shank to 3/8" on all sizes over 3/8" –

on carded drills.� Tri-Shank on sizes 3/16" thru 1/2" for positive grip.� Buy the best drills available.

(800) 228-0541 | 5

Cobalt JobberLength DrillsFractional Sizes, Cobalt Steel,135° Split Point Drills

TYPE C1SIZE1/641/323/641/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

PKG121212121212121212121212121212121212 6 6 6 6 6 6 6 6 6 6 6 6 6 6

P/NC1-164C1-132C1-364C1-116C1-564C1-332C1-764C1-18C1-964C1-532C1-1164C1-316C1-1364C1-732C1-1564C1-14C1-1764C1-932C1-1964C1-516C1-2164C1-1132C1-2364C1-38C1-2564C1-1332C1-2764C1-716C1-2964C1-1532C1-3164C1-12

� Our Cobalt Jobber Length Drills are made of Cobalt Steeland designed for stainless steel and all hard-to-drill alloys.

P/N CARDED–––C1-116CC1-564CC1-332CC1-764CC1-18CC1-964CC1-532CC1-1164CC1-316CC1-1364CC1-732CC1-1564CC1-14CC1-1764CC1-932CC1-1964CC1-516CC1-2164CC1-1132CC1-2364CC1-38CC1-2564CC1-1332CC1-2764CC1-716CC1-2964CC1-1532CC1-3164CC1-12C

Titanium JobberLength DrillsFractional Sizes,Type T Titanium Nitride Coated

TYPE TSIZE1/641/323/641/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

PKG121212121212121212121212121212121212 6 6 6 6 6 6 6 6 6 6 6 6 6 6

P/NT-164T-132T-364T-116T-564T-332T-764T-18T-964T-532T-1164T-316T-1364T-732T-1564T-14T-1764T-932T-1964T-516T-2164T-1132T-2364T-38T-2564T-1332T-2764T-716T-2964T-1532T-3164T-12

� Titanium coated for long life.

6 | (800) 228-0541

SIZE12345678910111213141516171819202122232425262728293031323334353637383940


TYPE J2, JB2 Black BrightP/NJ2-01J2-02J2-03J2-04J2-05J2-06J2-07J2-08J2-09J2-10J2-11J2-12J2-13J2-14J2-15J2-16J2-17J2-18J2-19J2-20J2-21J2-22J2-23J2-24J2-25J2-26J2-27J2-28J2-29J2-30J2-31J2-32J2-33J2-34J2-35J2-36J2-37J2-38J2-39J2-40

Wire Gauge Sizes, High Speed,118° Point, Black (J2) or Bright (JB2)

PKG12121212121212121212121212121212121212121212121212121212121212121212121212121212

SIZE41424344454647484950515253545556575859606162636465666768697071727374757677787980


TYPE J2 BlackP/NJ2-41J2-42J2-43J2-44J2-45J2-46J2-47J2-48J2-49J2-50J2-51J2-52J2-53J2-54J2-55J2-56J2-57J2-58J2-59J2-60J2-61J2-62J2-63J2-64J2-65J2-66J2-67J2-68J2-69J2-70J2-71J2-72J2-73J2-74J2-75J2-76J2-77J2-78J2-79J2-80

Wire Gauge Sizes, High Speed,118° Point, Black (J2)

PKG12121212121212121212121212121212121212121212121212121212121212121212121212121212

P/NJB2-01JB2-02JB2-03JB2-04JB2-05JB2-06JB2-07JB2-08JB2-09JB2-10JB2-11JB2-12JB2-13JB2-14JB2-15JB2-16JB2-17JB2-18JB2-19JB2-20JB2-21JB2-22JB2-23JB2-24JB2-25JB2-26JB2-27JB2-28JB2-29JB2-30JB2-31JB2-32JB2-33JB2-34JB2-35JB2-36JB2-37JB2-38JB2-39JB2-40

� Use on steel, wood and plastics. � Use on steel, wood and plastics.

(800) 228-0541 | 7

SIZE12345678910111213141516171819202122232425262728293031323334353637383940

Heavy DutyJobber Length Drills

TYPE JH2 Black Black/GoldP/NJH2-01JH2-02JH2-03JH2-04JH2-05JH2-06JH2-07JH2-08JH2-09JH2-10JH2-11JH2-12JH2-13JH2-14JH2-15JH2-16JH2-17JH2-18JH2-19JH2-20JH2-21JH2-22JH2-23JH2-24JH2-25JH2-26JH2-27JH2-28JH2-29JH2-30JH2-31JH2-32JH2-33JH2-34JH2-35JH2-36JH2-37JH2-38JH2-39JH2-40

Wire Gauge Sizes, High Speed,135° Split Point, Black Finish (JH2)

PKG12121212121212121212121212121212121212121212121212121212121212121212121212121212

Cobalt JobberLength DrillsWire Gauge Sizes, Cobalt Steel,135° Split Point Drills

TYPE C2SIZE12345678910111213141516171819202122232425262728293031323334353637383940

PKG12121212121212121212121212121212121212121212121212121212121212121212121212121212

P/NC2-01C2-02C2-03C2-04C2-05C2-06C2-07C2-08C2-09C2-10C2-11C2-12C2-13C2-14C2-15C2-16C2-17C2-18C2-19C2-20C2-21C2-22C2-23C2-24C2-25C2-26C2-27C2-28C2-29C2-30C2-31C2-32C2-33C2-34C2-35C2-36C2-37C2-38C2-39C2-40

P/NJBE2-01JBE2-02JBE2-03JBE2-04JBE2-05JBE2-06JBE2-07JBE2-08JBE2-09JBE2-10JBE2-11JBE2-12JBE2-13JBE2-14JBE2-15JBE2-16JBE2-17JBE2-18JBE2-19JBE2-20JBE2-21JBE2-22JBE2-23JBE2-24JBE2-25JBE2-26JBE2-27JBE2-28JBE2-29JBE2-30JBE2-31JBE2-32JBE2-33JBE2-34JBE2-35JBE2-36JBE2-37JBE2-38JBE2-39JBE2-40

8 | (800) 228-0541

1/16" to 1/2" DS-29TI29 pc.

#1 to #60#60 to #80

1/16" to 1/4"1/16" to 1/2"1/16" to 3/8"1/16" to 1/2"


TYPE J3SIZEABCDEFGHIJKLMNOPQRSTUVWXYZ

P/NJ3-AJ3-BJ3-CJ3-DJ3-EJ3-FJ3-GJ3-HJ3-IJ3-JJ3-KJ3-LJ3-MJ3-NJ3-OJ3-PJ3-QJ3-RJ3-SJ3-TJ3-UJ3-VJ3-WJ3-XJ3-YJ3-Z

Letter Sizes, High Speed,118° Point, Black Finish

PKG1212121212121212666666666666666666

SIZES1/16" to 1/4"1/16" to 1/2"1/16" to 3/8"1/16" to 1/2"

Jobber LengthDrill SetsGENERAL PURPOSE TYPE J

P/NDS-13DS-15DS-21DS-29

FINISHBlackBlackBlackBlack

SET SIZE13 pc.15 pc.21 pc.29 pc.

COBALT TYPE C11/16" to 1/4"1/16" to 1/2"1/16" to 3/8"1/16" to 1/2"

DS-13CODS-15CODS-21CODS-29CO

13 pc.15 pc.21 pc.29 pc.

GENERAL PURPOSE TYPE J3

TITANIUM TYPE T

A to Z Set DS-26Black26 pc.

GENERAL PURPOSE TYPE JBDS-13BDS-15BDS-21BDS-29B

BrightBrightBrightBright

13 pc.15 pc.21 pc.29 pc.

DS-60DS-20

BlackBlack

60 pc.20 pc.

GENERAL PURPOSE TYPE J2

(800) 228-0541 | 9

SIZE0.350.400.450.500.550.600.650.700.750.800.850.900.951.001.051.101.151.201.251.301.351.401.451.501.551.601.651.701.751.801.851.901.952.002.05

Metric JobberLength DrillsTYPE JM

P/NJM-035JM-040JM-045JM-050JM-055JM-060JM-065JM-070JM-075JM-080JM-085JM-090JM-095JM-100JM-105JM-110JM-115JM-120JM-125JM-130JM-135JM-140JM-145JM-150JM-155JM-160JM-165JM-170JM-175JM-180JM-185JM-190JM-195JM-200JM-205

SIZE2.102.152.202.252.302.352.402.452.502.552.602.702.752.802.903.003.103.203.253.303.403.503.603.703.753.803.904.004.104.204.254.304.404.504.60


SIZE4.704.754.804.905.005.105.205.255.305.405.505.605.705.755.805.906.006.106.206.256.306.406.506.606.706.756.806.907.007.107.207.257.307.407.50


SIZE7.607.707.757.807.908.008.108.208.258.308.408.508.608.708.758.808.909.009.109.209.259.309.409.509.609.709.759.809.9010.0010.5011.0011.5012.0012.50


� Sizes 0.35 – 7.00 are packaged 12 each. Sizes 7.10 – 12.50 are packaged 6 each.

PKG1212121212121212121212121212121212121212121212121212121212121212121212

PKG1212121212121212121212121212121212121212121212121212121212121212121212

PKG1212121212121212121212121212121212121212121212121212121212

666666

PKG66666666666666666666666666666666666

10 | (800) 228-0541

SIZE12345678910111213141516171819202122232425262728293031323334353637383940

Screw MachineLength DrillsFractional Sizes, 135° Split Point

TYPE SM1SIZE1/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

PKG1212121212121212121212121212 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

P/NSM1-116SM1-564SM1-332SM1-764SM1-18SM1-964SM1-532SM1-1164SM1-316SM1-1364SM1-732SM1-1564SM1-14SM1-1764SM1-932SM1-1964SM1-516SM1-2164SM1-1132SM1-2364SM1-38SM1-2564SM1-1332SM1-2764SM1-716SM1-2964SM1-1532SM1-3164SM1-12

Screw MachineLength DrillsWire Gauge Sizes, 135° Split Point

TYPE SM2P/NSM2-01SM2-02SM2-03SM2-04SM2-05SM2-06SM2-07SM2-08SM2-09SM2-10SM2-11SM2-12SM2-13SM2-14SM2-15SM2-16SM2-17SM2-18SM2-19SM2-20SM2-21SM2-22SM2-23SM2-24SM2-25SM2-26SM2-27SM2-28SM2-29SM2-30SM2-31SM2-32SM2-33SM2-34SM2-35SM2-36SM2-37SM2-38SM2-39SM2-40

PKG12121212121212121212121212121212121212121212121212121212121212121212121212121212

Double End DrillsTYPE TESIZE#301/83/161/4

PKG12121212

P/NTE-30TE-18TE-316TE-14

(800) 228-0541 | 11

AircraftExtension DrillsType AC6 – 6" Long, Type AC12 – 12" Long,Type AC18 – 18" Long, Type AC24 – 24" Long

TYPE ACSIZE1/165/643/327/641/89/645/3211/643/1613/647/3215/641/417/649/3219/645/1611/323/813/327/1615/321/2

AC6 P/NAC6-116AC6-564AC6-332AC6-764AC6-18AC6-964AC6-532AC6-1164AC6-316AC6-1364AC6-732AC6-1564AC6-14AC6-1764AC6-932AC6-1964AC6-516AC6-1132AC6-38AC6-1332AC6-716AC6-1532AC6-12

AC12 P/N––––AC12-18–––AC12-316–––AC12-14–––AC12-516–AC12-38–AC12-716–AC12-12

� Packaged one each in a vinyl sleeve.

AC18 P/N––––––––AC18-316–––AC18-14–––AC18-516–AC18-38–AC18-716–AC18-12

AC24 P/N––––––––––––AC24-14–––AC24-516–AC24-38–AC24-716–AC24-12

Long BoyDrills18" Long,Full Flute

TYPE LB18SIZE1/45/163/87/161/2

P/NLB18-14LB18-516LB18-38LB18-716LB18-12

� Packaged one eachin a vinyl sleeve.

12 | (800) 228-0541

Silver and DemingDrills – 1/2" ShankWith 3 Flats Ground into Shanks

TYPE SD3SIZE33/6417/3235/649/1637/6419/3239/645/841/6421/3243/6411/1645/6423/3247/643/449/6425/3251/6413/1653/6427/3255/647/857/6429/3259/6415/1661/6431/3263/6411-1/81-1/41-1/2

SD P/NSD3-3364SD3-1732SD3-3564SD3-916SD3-3764SD3-1932SD3-3964SD3-58SD3-4164SD3-2132SD3-4364SD3-1116SD3-4564SD3-2332SD3-4764SD3-34SD3-4964SD3-2532SD3-5164SD3-1316SD3-5364SD3-2732SD3-5564SD3-78SD3-5764SD3-2932SD3-5964SD3-1516SD3-6164SD3-3132SD3-6364SDL3-1SDL3-1164SDL3-1132SDL3-1332

� Packaged one each in a plastic tube.

Silver and DemingDrills – 3/8" ShankTYPE SDRSIZE9/165/811/163/4

P/NSDR-916SDR-58SDR-1116SDR-34


Silver and DemingDrills – 3/4" ShankTYPE SDQSIZE1-9/161-5/81-11/161-3/41-7/82

P/NSDQ-1916SDQ-158SDQ-11116SDQ-134SDQ-178SDQ-2


(800) 228-0541 | 13

Reduced ShankDrillsType Q – 1/4" ShankType R – 3/8" Shank

TYPE Q AND TYPE RSIZE17/649/3219/645/1621/6411/3223/643/825/6413/3227/647/1629/6415/3231/641/2

TYPE Q P/NQ-1764Q-932Q-1964Q-516Q-2164Q-1132Q-2364Q-38Q-2564Q-1332Q-2764Q-716Q-2964Q-1532Q-3164Q-12

TYPE R P/N––––––––JBER-2564JBER-1332JBER-2764JBER-716JBER-2964JBER-1532JBER-3164JBER-12

CombinedDrill/CountersinkTYPE CDSIZE

#1#2#3#4#5#6#7#8

BODYDIA.1/8"3/16"1/4"5/16"7/16"1/2"5/8"3/4"

DRILLDIA.3/64"5/64"7/64"1/8"3/16"7/32"1/4"5/16"

O/ALGTH1-1/4"1-7/8"2"2-1/8"2-3/4"3"3-1/4"3-1/2"

P/N

CD-1CD-2CD-3CD-4CD-5CD-6CD-7CD-8



Tap WrenchesTYPE TWSIZE0 to 1/4#10 to 3/8#12 to 1/2#10 to 1/25/32 to 3/41/4 to 1-1/83/4 to 1-5/8

P/NTW-1TW-2TW-3TW-5TW-6TW-7TW-8

PKG1111111

Die StockTYPE RDSO.D. SIZE11-1/22

P/NRSD-1RSD-2RSD-3

PKG111

Taper Pipe Taps

TYPE PT

Carbon Steel

SIZE1/81/43/81/23/411-1/41-1/222-1/23

P/NPT-18PT-14PT-38PT-12PT-34PT-1PT-114PT-112PT-2PT-212PT-3

PKG11111111111

14 | (800) 228-0541

High Speed TapsTYPE HSTSIZE2 - 56NC4 - 40NC5 - 40NC6 - 32NC8 - 32NC10 - 24NC10 - 32NF12 - 24NC12 - 28NF1/4 - 20NC1/4 - 28NF5/16 - 18NC5/16 - 24NF3/8 - 16NC3/8 - 24NF7/16 - 14NC7/16 - 20NF1/2 - 13NC1/2 - 20NF9/16 - 12NC9/16 - 18NF5/8 - 11NC5/8 - 18NF3/4 - 10NC3/4 - 16NF7/8 - 9NC7/8 - 14NF1 - 8NC1 - 12NF1 - 141-1/8 - 71-1/8 - 121-1/4 - 71-1/4 - 121-3/8 - 61-3/8 - 121-1/2 - 61-1/2 - 12

PKG121212121212121212121212121212121212121111111111111111111

P/NHST-256HST-440HST-540HST-632HST-832HST-1024HST-1032HST-1224HST-1228HST-1420HST-1428HST-51618HST-51624HST-3816HST-3824HST-71614HST-71620HST-1213HST-1220HST-91612HST-91618HST-5811HST-5818HST-3410HST-3416HST-789HST-7814HST-18HST-112HST-114HST-1187HST-11812HST-1147HST-11412HST-1386HST-13812HST-1126HST-11212

� When ordering High Speed Taps, specify P (plug),T (taper) or B (bottom) to the end of the part number.

� When ordering Tap Sets (one each plug, taper andbottom) add S to the end of the part number.

Spiral Point TapsTYPE SPTSIZE2 - 56NC4 - 40NC5 - 40NC6 - 32NC8 - 32NC10 - 24NC10 - 32NF12 - 24NC12 - 28NF1/4 - 20NC1/4 - 28NF5/16 - 18NC5/16 - 24NF3/8 - 16NC3/8 - 24NF7/16 - 14NC7/16 - 20NF1/2 - 13NC1/2 - 20NF5/8 - 11NC5/8 - 18NF3/4 - 10NC3/4 - 16NF7/8 - 9NC7/8 - 14NF1 - 8NC1 - 14

PKG1212121212121212121212121212121212121211111111

P/NSPT-256SPT-440SPT-540SPT-632SPT-832SPT-1024SPT-1032SPT-1224SPT-1228SPT-1420SPT-1428SPT-51618SPT-51624SPT-3816SPT-3824SPT-71614SPT-71620SPT-1213SPT-1220SPT-5811SPT-5818SPT-3410SPT-3416SPT-789SPT-7814SPT-18SPT-114

� When ordering Carbon Steel Taps, specify P (plug),T (taper) or B (bottom) to the end of the part number.

� When ordering Tap Sets (one each plug, taper andbottom) add S to the end of the part number.

(800) 228-0541 | 15

Hex Rethread Dies

TYPE HRDSIZE6 - 328 - 3210 - 2410 - 3212 - 241/4 - 201/4 - 285/16 - 185/16 - 243/8 - 163/8 - 247/16 - 147/16 - 201/2 - 131/2 - 209/16 - 129/16 - 185/8 - 115/8 - 183/4 - 103/4 - 167/8 - 97/8 - 141 - 81 - 121 - 141-1/8 - 71-1/8 - 121-1/4 - 71-1/4 - 121-1/2 - 61-1/2 - 12

P/NHRD-632HRD-832HRD-1024HRD-1032HRD-1224HRD-1420HRD-1428HRD-51618HRD-51624HRD-3816HRD-3824HRD-71614HRD-71620HRD-1213HRD-1220HRD-91612HRD-91618HRD-5811HRD-5818HRD-3410HRD-3416HRD-789HRD-7814HRD-18HRD-112HRD-114HRD-1187HRD-11812HRD-1147HRD-11412HRD-1126HRD-11212

Carbon Steel

PKG11111111111111111111111111111111

Solid Round Dies

TYPE RDSIZE4 - 405 - 406 - 328 - 3210 - 2410 - 3212 - 241/4 - 201/4 - 285/16 - 185/16 - 243/8 - 163/8 - 247/16 - 147/16 - 201/2 - 131/2 - 20

P/NRD-440RD-540RD-632RD-832RD-1024RD-1032RD-1224RD-1420RD-1428RD-51618RD-51624RD-3816RD-3824RD-71614RD-71620RD-1213RD-1220

1" O.D. Carbon Steel

PKG11111111111111111

Hex Pipe DiesTYPE HPDSIZE1/8 - 271/4 - 183/8 - 181/2 - 143/4 - 141-11 - 1/2

P/NHRDP-1827HRDP-1418HRDP-3818HRDP-1214HRDP-3414HRDP-11112

PKG111111

16 | (800) 228-0541

Ship AugerBitsTYPE SA9 – 9" LONGSIZE1/45/163/87/161/29/165/811/163/413/167/815/1611-1/81-1/41-3/81-1/2

LENGTH99999999999999999

P/NSA9-14SA9-516SA9-38SA9-716SA9-12SA9-916SA9-58SA9-1116SA9-34SA9-1316SA9-78SA9-1516SA9-1SA9-118SA9-114SA9-138SA9-112

� New auger bits with longer threaded lead screw pullsthrough the work and requires less pressure to feed.

TYPE SA18 – 18" LONGSIZE3/87/161/29/165/811/163/413/167/815/1611-1/81-1/41-3/81-1/2

LENGTH181818181818181818181818181818

P/NSA18-38SA18-716SA18-12SA18-916SA18-58SA18-1116SA18-34SA18-1316SA18-78SA18-1516SA18-1SA18-118SA18-114SA18-138SA18-112

Ship AugerBitsTYPE SA24 – 24" LONGSIZE5/83/47/811-1/81-1/4

LENGTH242424242424

P/NSA24-58SA24-34SA24-78SA24-1SA24-118SA24-114

� New auger bits with longer threaded leadscrew pulls through the work and requires lesspressure to feed.

TYPE SA36 – 36" LONGSIZE5/83/47/811-1/81-1/4

LENGTH363636363636

P/NSA36-58SA36-34SA36-78SA36-1SA36-118SA36-114

New long lengths 24" and 36"

PKG11111111111111111

PKG111111111111111

PKG111111

PKG111111

(800) 228-0541 | 17

Wood SpadeBitsTYPE WS6 – 6" LONGSIZE1/45/163/87/161/29/165/811/163/413/167/815/1611-1/81-1/41-3/81-1/2

LENGTH66666666666666666

P/NWS6-14WS6-516WS6-38WS6-716WS6-12WS6-916WS6-58WS6-1116WS6-34WS6-1316WS6-78WS6-1516WS6-1WS6-118WS6-114WS6-138WS6-112

� New spade bits with outside spurs for drilling all types ofwood. Precision ground, hardened steel.

TYPE WS16 – 16" LONGSIZE1/43/81/25/83/47/81

LENGTH16161616161616

P/NWS16-14WS16-38WS16-12WS16-58WS16-34WS16-78WS16-1

Auger and SpadeBit ExtensionsTYPE SAE – SHIP AUGERSIZE7/16 x 127/16 x 187/16 x 24

P/NSAE-12SAE-18SAE-24

TYPE WSE – WOOD SPADESIZE6"12"

P/NWS-EXT-6WS-EXT-12

WOOD SPADE SET – 6" LONGSIZES1/4"–1"

P/NWS6

SET SIZE6 pieces

PKG11111111111111111

PKG1111111

PKG111

PKG11

18 | (800) 228-0541

Self Feed BitsTYPE SFBSIZE11-1/81-1/41-3/81-1/21-3/422-1/82-1/42-9/1633-5/84-5/8

P/NSFB-1SFB-118SFB-114SFB-138SFB-112SFB-134SFB-2SFB-218SFB-214SFB-2916SFB-3SFB-358SFB-458

PKG1111111111111

� Fast, heavy-duty boring of large holes.� Double end feed screw for easy, accurate starting bore.� Heat treated and tempered to resist wear.� Precision angled chisel cuts smooth, perfectly round holes.� Universal 7/16" shank to accept extension shank.

SELF FEED EXTENSIONSIZE12"18"24"

P/NSFBEX-12SFBEX-18SFBEX-24

PKG111

SCREW POINTSSIZESmallLarge

P/NSFBSC-1SFBSC-2

PKG11

Brad Point DrillsTYPE BPDSIZE1/83/161/45/163/87/161/25/83/47/81

PKG11111111111

P/NBPD-18BPD-316BPD-14BPD-516BPD-38BPD-716BPD-12BPD-58BPD-34BPD-78BPD-1

Forstner Bit SetsTYPE FBSIZES1/4" to 1"1/4" to 2-1/8"

P/NFB-7FB-16

SET SIZE7 pc.16 pc.

(800) 228-0541 | 19

Nail Buster Auger Bits

TYPE NEA – 8" AND 18" LONGSIZE1/29/165/811/163/413/167/815/1611-1/81-1/4

8" LONG P/NNEA8-12NEA8-916NEA8-58NEA8-1116NEA8-34NEA8-1316NEA8-78NEA8-1516NEA8-1NEA8-118NEA8-114

18" LONG P/NNEA18-12NEA18-916NEA18-58NEA18-1116NEA18-34NEA18-1316NEA18-78NEA18-1516NEA18-1NEA18-118NEA18-114

� Self-feed screw point.� Machined on a true center to prevent wobble.� Special head design makes sharpening easy.

Cuts through nail embedded wood

� Balanced double-flute for clean, burr-free holes.� Self-starting point, no pre-drilling.� Free cutting, cooler running.

Taper Step Drill Bits

TYPE TSD

High-speed steel with TIN Coating

SHANK3/8

3/8

3/8

1/2

3/8

1/4

1/4

DESCRIPTION3 steps from 1/4" to 1-1/8"7/8" hole – 1/2" conduit1-1/8" hole – 3/4" conduit9 steps from 1/4" to 3/4"1/4" each step – 3/8", 7/16"and 3/4" KO drive screws8 steps from 9/16" to 1"1/16" each step5 steps from 7/8" to 1-3/8"1/8" each step12 steps from 3/16" to 7/8"1/16" each step6 steps from 3/16" to 1/2"1/16" each step13 steps from 1/8" to 1/2"1/32" each step

P/NTSD-3

TSD-9

TSD-8

TSD-5

TSD-12

TSD-6

TSD-13

CROSS REFERENCENETD Lenox Greenlee Milwaukee Klein Unibit

TSD-3 VB11 36413 48-89-9135 – –

TSD-9 VB3 – 48-89-9105 59003 3

TSD-8 VB2 – 48-89-9110 59002 20

TSD-5 VB12 – – 59004 21

TSD-12 VB8 34403 48-89-9130 59014 4

TSD-6 VB4 36402 – 59005 2

TSD-13 VB1 34401 48-89-9100 59001 1

20 | (800) 228-0541

Bell HangerDrillsTYPE BH CARBON STEELSIZE3/161/41/41/41/45/165/165/165/163/83/83/83/87/161/21/21/25/83/47/81

LENGTH181824364818243648182436481818243618181818

P/NBH31618BH1418BH1424BH1436BH1448BH51618BH51624BH51636BH51648BH3818BH3824BH3836BH3848BH71618BH1218BH1224BH1236BH5818BH3418BH7818BH118

� For installing small wires through walls ofvarious materials.

� Allows user to pull wire back through hole indrill flute.

TYPE BHC CARBIDE TIPPEDSIZE1/41/43/83/83/87/161/21/21/25/83/4

LENGTH1836182436181824361818

P/NBHC1418BHC1436BHC3818BHC3824BHC3836BHC71618BHC1218BHC1224BHC1236BHC5818BHC3418

Long Flexible-ShaftFish Bits Bell Hanger Type

TYPE FBH – CARBON STEELSIZE1/4 x 481/4 x 723/8 x 483/8 x 721/2 x 481/2 x 72

P/NFBH1448FBH1472FBH3848FBH3872FBH1248FBH1272

PKG111111

TYPE FBH – CARBON STEELSIZE1/4 x 481/4 x 723/8 x 483/8 x 721/2 x 481/2 x 72

P/NBHC1448BHC1472BHC3848BHC3872BHC1248BHC1272

PKG111111

(800) 228-0541 | 21

SIZE1/45/163/81/25/83/47/81

Masonry Drills –Rotary andPercussion TypeTYPE MD12 – 12" LONGSIZE1/45/163/81/25/83/47/81

LENGTH1212121212121212

P/NMD12-14MD12-516MD12-38MD12-12MD12-58MD12-34MD12-78MD12-1

TYPE MD18 – 18" LONGLENGTH1818181818181818


TYPE MD24 – 24" LONGSIZE1/45/163/81/25/83/47/81

LENGTH2424242424242424



Masonry Drills –Rotary andPercussion TypeTYPE MD6 STANDARD LENGTHSIZE1/83/163/161/41/45/165/163/83/87/161/21/29/165/811/163/47/81

LENGTH346464646666666666

P/NMD6-183MD6-3164MD6-3166MD6-144MD6-146MD6-5164MD6-5166MD6-384MD6-386MD6-7166MD6-126Q*MD6-126R*MD6-916MD6-586MD6-1116MD6-34MD6-78MD6-1

*Q - 1/4" Shank; R - 3/8" Shank.� Packaged one each in a plastic tube.

22 | (800) 228-0541

SDS-PlusDrill BitsTYPE SDSSIZE5/323/163/163/163/163/167/327/327/327/321/41/41/41/41/41/45/165/165/163/83/83/83/83/83/87/167/161/21/21/21/21/29/169/165/85/85/85/85/83/43/43/43/4

LENGTH6"4"6"10"12"14"6"8"12"16"4"6"8"12"14"20"6"9"12"6"9"12"18"24"36"6"12"6"12"18"24"37"6"12"8"12"18"24"36"9"12"18"24"

P/NSDS-5326SDS-3164SDS-3166SDS-31610SDS-31612SDS-31614SDS-7326SDS-7328SDS-73212SDS-73216SDS-144SDS-146SDS-148SDS-1412SDS-1414SDS-1420SDS-5166SDS-5169SDS-51612SDS-386SDS-389SDS-3812SDS-3818SDS-3824SDS-3836SDS-7166SDS-71612SDS-126SDS-1212SDS-1218SDS-1224SDS-1237SDS-9166SDS-91612SDS-588SDS-5812SDS-5818SDS-5824SDS-5836SDS-349SDS-3412SDS-3418SDS-3424

SDS-Plus Shank

PKG1111111111111111111111111111111111111111111

TYPE SDSSIZE7/87/87/81111-1/81-1/8

LENGTH8"12"18"12"18"30"10"18"

P/NSDS-788SDS-7812SDS-7818SDS-112SDS-118SDS-130SDS-11810SDS-11818

PKG11111111

SDS-PlusDrill Bits SDS-Plus Shank

� Packaged one each on hanger clip.

(800) 228-0541 | 23

Tapcon ConcreteScrew InstallationBitsTYPE TC TAPCON DRILLSSIZE5/32 x 3-1/25/32 x 4-1/25/32 x 5-1/25/32 x 6-1/25/32 x 7-1/23/16 x 3-1/23/16 x 4-1/23/16 x 5-1/23/16 x 6-1/23/16 x 7-1/2

P/NTC-532312TC-532412TC-532512TC-532612TC-532712TC-316312TC-316412TC-316512TC-316612TC-316712

Type TC SDSTapcon BitsTYPE SDSSIZE5/325/323/163/16

LENGTH5"7"5"7"

P/NTC-5325TC-5327TC-3165TC-3167

� Packaged one each in a vinyl pouch.

PKG1111

Carbide PercussionCore BitsSIZE

1-1/41-1/21-3/422-1/23456Spline ShankSpline Shank 18"SDS-MAX ShankSDS-MAX Shank 18"Center Starter Bit

P/N

PC-125PC-150PC-175PC-2PC-212PC-3PC-4PC-5PC-6PCSDPCSD18PCMAXPCMAX18PCBIT

OVERALLLENGTH666666666

COREDEPTH444444444

TYPE PC TAPER FIT STYLE

24 | (800) 228-0541

Spline Shank HammerDrill BitsTYPE SPLSIZE

3/83/81/21/21/21/25/85/85/85/83/43/43/43/47/87/87/87/811111-1/81-1/81-1/41-1/41-1/41-3/81-3/81-1/21-1/21-1/2

LGTH

1218121823361218233612182336121823361218233618231823361823182336

P/N

SPL-3812SPL-3818SPL-1212SPL-1218SPL-1223SPL-1236SPL-5812SPL-5818SPL-5823SPL-5836SPL-3412SPL-3418SPL-3423SPL-3436SPL-7812SPL-7818SPL-7823SPL-7836SPL-112SPL-118SPL-123SPL-136SPL-11818SPL-11823SPL-11418SPL-11423SPL-11436SPL-13818SPL-13823SPL-11218SPL-11223SPL-11236

Spline Shank

DRILLINGDEPTH6126121730612173061217306121730612173012171217301217121730

� Packaged one each in a plastic tube.� Special order for longer lengths.

Spline Shank HammerDrill BitsTYPE SPLXSIZE

3/43/43/47/87/87/81111-1/81-1/41-1/41-3/81-1/21-1/21-3/42

LGTH

1218231218231218232318232318232323

P/N

SPLX-3412SPLX-3418SPLX-3423SPLX-7812SPLX-7818SPLX-7823SPLX-112SPLX-118SPLX-123SPLX-11823SPLX-11418SPLX-11423SPLX-13823SPLX-11218SPLX-11223SPLX-13423SPLX-223

Quad Tip Spline

DRILLINGDEPTH6121761217612171712171712171717

� Packaged one each in a plastic tube.� Special order for longer lengths.

(800) 228-0541 | 25


TYPE SDSMSIZE1/21/21/25/85/85/83/43/43/47/87/87/81111-1/81-1/81-1/41-3/81-1/2

LENGTH1321361321361321361321361321361321212121

P/NSDSM-1213SDSM-1221SDSM-1236SDSM-5813SDSM-5821SDSM-5836SDSM-3413SDSM-3421SDSM-3436SDSM-7813SDSM-7821SDSM-7836SDSM-113SDSM-121SDSM-136SDSM-11813SDSM-11821SDSM-11421SDSM-13821SDSM-11221

PKG11111111111111111111

SDS-MAXDrill Bits SDS-MAX Shank


TYPE SDSMXSIZE3/43/47/87/8111-1/81-1/41-3/81-1/21-3/42

LENGTH132113211321212121212123

P/NSDSMX-3413SDSMX-3421SDSMX-7813SDSMX-7821SDSMX-113SDSMX-121SDSMX-11821SDSMX-11421SDSMX-13821SDSMX-11221SDSMX-13421SDSMX-223

PKG111111111111

Quad Tip SDS-MAXDrill Bits SDS-MAX Shank

NEED QUAD TIP PHOTO

A Taper DrillsTYPE ASIZE3/161/43/81/21/25/83/4

LENGTH6666999

P/NA-3166A-146A-386A-126A-129A-589A-349

A TAPER ADAPTERSSpline to A TaperHilti TE52-60 to A TaperHilti TE17-22 Bosch TNT to ASpline to SDS

ATSPAHT-52ATH-717SPL-SDS

Glass DrillsTYPE GDSIZE1/83/161/45/163/81/2

P/NGD18GD316GD14GD516GD38GD12

� Packaged one each in a vinyl pouch.

26 | (800) 228-0541

Demolition Steel forElectric Hammers –Spline Shank ToolsTYPE ST FLAT CHISELSIZE1/2 x 121/2 x 18

P/NFC12FC18

TYPE ST BULL (MOIL) POINTSIZE1 x 121 x 18

P/NBP12BP18

TYPE ST SCALERSIZE2 x 122 x 18

P/NSC12SC18

TYPE ST SLOTTERSIZE1-1/8 x 12

P/NSL112

TYPE ST MORTAR CHISELSIZE1-1/8 x 15

P/NMC118

TYPE ST BUSHING TOOLSSIZE16 pt. HeadSpline ShankSDS-MAX ShankGround Rod Driver

P/NBTHBTSSBTSHGRD

Demolition Steel forElectric Hammers –SDS-MAX Shank ToolsTYPE ST FLAT CHISELSIZE1 x 121 x 18

P/NFCM12FCM18

TYPE ST BULL (MOIL) POINTSIZE1 x 121 x 18

P/NBPM12BPM18

TYPE ST SCALERSIZE2 x 122 x 18

P/NSCM12SCM18

TYPE ST SLOTTERSIZE1-1/8 x 12

P/NSLM112

TYPE ST MORTAR CHISELSIZE1-1/8 x 15

P/NMCM115

(800) 228-0541 | 27

EZ LockQuick Change KitTYPE EZLDESCRIPTION11-piece Bit Kit with Phillips,Slotted and Square inserts.EZ Lock quick-change bit holder.

P/NEZL

Bit KitsTYPE BKDESCRIPTION30-piece Screwdriver Kit30-piece Security Bit Set35-piece Ratchet & Socket Bit Kit

P/NBK30BK30SBK35

4-in-1 Screwdriver

6-in-1 Screwdriver

DESCRIPTIONSold 12 per counter display

P/N41

DESCRIPTIONSold 12 per counter display

P/N61

28 | (800) 228-0541

POINT SIZE#0#1#2#2 (Drywall style)#3#4

Power ScrewdriverPhillips Inser t Bit –ShortTYPE PH

P/NPH0PH1PH2PHR2PH3PH4

PKG111111

POINT SIZE#1#2#3#1#2#3#1#2#3#1#2#3

Power ScrewdriverPhillips Power Bit –LongTYPE PH

P/NPH1-2PH2-2PH3-2PH1-234PH2-234PH3-234PH1-312PH2-312PH3-312PH1-6PH2-6PH3-6

PKG111111111111

LENGTH2222-3/42-3/42-3/43-1/23-1/23-1/2666

1/4" Hex Drive

SOCKET SIZE1/45/163/87/161/2

Power ScrewdriverMagnetic Nut Setters

SHANK:P/NMNS-14SMNS-516SMNS-38SMNS-716SMNS-12S

1-5/8" 2-9/16" 4" 6" 12"

Type MNS, 1/4" Hex Drive

P/NMNS-14MNS-516MNS-38MNS-716MNS-12

P/NMNS-14-4MNS-516-4MNS-38-4MNS-716-4MNS-12-4



Magnetic Bit Holders

TYPE MBHM

1/4" Hex Drive

LENGTH3"6"8"12"

DESCRIPTIONStainless steelone-piece body withscrew cap and o-ring

P/NMBHM-14MBHM-14-6MBHM-14-8MBHM-14-12

TYPE MBHLENGTH2-3/8"3"

DESCRIPTIONOne piece withC-ring

P/NMBH-14SMBH-14L

TYPE EZ LOCKLENGTH3"

DESCRIPTIONEZ Lock quick-releaseholder

P/NEZL-14

(800) 228-0541 | 29

POINT SIZE#1#2#3#1#2#3#1#2#3#1#2#3

Square DriveInsert BitsTYPE SQPOINT SIZE#0#1#2#3

P/NSQ0SQ1SQ2SQ3

Long Length SquareDrive Power BitsTYPE SQ

P/NSQ1-2SQ2-2SQ3-2SQ1-234SQ2-234SQ3-234SQ1-312SQ2-312SQ3-312SQ1-6SQ2-6SQ3-6

LENGTH2222-3/42-3/42-3/43-1/23-1/23-1/2666

Slotted2" Power BitsTYPE SLSCREW SIZE#4F-5R#5F-6R#6F-8R#8F-10R#10F-12R

P/NSL4-2SL5-2SL6-2SL8-2SL10-2

SlottedInsert BitsTYPE SLSCREW SIZE#3F-4R#4F-5R#5F-6R#6F-8R#8F-10R#10F-12R#12F-14R

P/NSL3SL4SL5SL6SL8SL10SL12

Pozi DriveInsert BitsTYPE PZPOINT SIZE#1#2#3

P/NPZ1PZ2PZ3

Pozi Drive2" Power BitsTYPE PZPOINT SIZE#1#2#3

P/NPZ1-2PZ2-2PZ3-2

30 | (800) 228-0541

Star Insert Bits1/4" Hex DriveWith tamper resistant hole

TYPE TXSIZET6T7T8T9T10T15T20T25T27T30T40

P/NTX6TX7TX8TX9TX10TX15TX20TX25TX27TX30TX40

Star Power Bits2" Long1/4" Hex DriveWith tamper resistant hole

TYPE TXSIZET6T7T8T9T10T15T20T25T27T30T40

P/NTX6-2TX7-2TX8-2TX9-2TX10-2TX15-2TX20-2TX25-2TX27-2TX30-2TX40-2

� Star Bits are for use with TORX screws.

Star Power Bits3-1/2" Long1/4" Hex DriveTYPE TXSIZET7T8T9T10T15T20T25T27T30T40

P/NTX7-312TX8-312TX9-312TX10-312TX15-312TX20-312TX25-312TX27-312TX30-312TX40-312

Star Power Bits6" Long1/4" Hex DriveTYPE TXSIZET7T8T9T10T15T20T25T27T30T40

P/NTX7-6TX8-6TX9-6TX10-6TX15-6TX20-6TX25-6TX27-6TX30-6TX40-6

(800) 228-0541 | 31

Hex Insert Bits1/4" Hex DriveTYPE HBSIZE1/163/321/85/323/167/321/45/16

P/NHB116HB332HB18HB532HB316HB732HB14HB516

Power SocketExtensions1/4" Hex DriveTYPE EXSIZE1/4" hex to 1/4" sq x 1"1/4" hex to 1/4" sq x 2"1/4" hex to 1/4" sq x 4"1/4" hex to 1/4" sq x 6"1/4" hex to 1/4" sq x 10"1/4" hex to 3/8" sq x 2"1/4" hex to 3/8" sq x 4"1/4" hex to 3/8" sq x 6"1/4" hex to 3/8" sq x 8"

P/NEX14-1EX14-2EX14-4EX14-6EX14-10EX38-2EX38-4EX38-6EX38-8

Double End BitsTYPE DESIZE#2 and #2 Phillips#1 and #2 Square#2 Phillips and #8 Slotted

P/NDE-PHDE-SQDE-PS

Drywall Driver ToolTYPE DWDP/NDWD

4-piece MagneticNut Setter SetTYPE MNSSIZES1/4, 5/16, 3/8, and 7/16

P/NMNS-KIT

AcousticalLag DriverTYPE ALDP/NALD

Screwdriver Bit Assortments –All popular bits and drivers in tilt-out bin display.

32 | (800) 228-0541

SUPER-CUTReciprocating Saw BladesBi-Metal with Flexible Alloy Body

METAL CUTTINGLENGTH4"4"4"6"6"6"8"8"12"

WIDTH5/8"5/8"5/8"3/4"3/4"3/4"3/4"3/4"3/4"

TEETH141824141824181414

APPLICATIONMetal over 1/8"Heavy-gauge metal/pipe/conduitThin metal tube/pipe under 18 gaugeMetal over 1/8"Heavy-gauge metal/pipe/conduitThin metal tube/pipe under 18 gaugeMetal over 18 gauge – long reachMetal over 1/8" angle stockMetal over 1/8" – long reach

P/NRB414RB418RB424RB614RB618RB624RB818RB814RB1214

METAL DECK – WOOD/NAILSLENGTH6"8"

WIDTH3/4"3/4"

TEETH1010

APPLICATIONMetal deck, roofing, cast aluminum and brassNail-imbedded wood, large pipe

P/NRB610RB810

HEAVY-DUTY WOOD CUTTINGLENGTH6"9"12"

WIDTH3/4"3/4"3/4"

TEETH666

APPLICATIONBi-metal construction for extra fast wood cuttingBi-metal construction for extra fast wood cuttingBi-metal construction for extra fast wood cutting

P/NRB606RB906RB1206

PLASTERLENGTH6"

WIDTH3/4"

TEETH6

APPLICATIONPlaster, plaster board, metal lath

P/NRB606P

(800) 228-0541 | 33

� 8% Cobalt matrix HSS cutting edge welded to flexiblesteel back.

� Special CAD/CAM design teeth for faster cuts andlong life.

� Shatter resistant for added user safety.� All blades are packaged (5) per vinyl pouch.

SUPER-CUTReciprocating Saw BladesBi-Metal with Flexible Alloy Body

METAL SCROLLLENGTH6"

WIDTH5/8"

TEETH6

APPLICATIONScroll cutting, irregular contours

P/NRB606S

TILE AND CERAMICLENGTH6"8"

WIDTH3/4"3/4"

TEETHGritGrit

APPLICATIONTile, ceramics, castings, hard abrasivesTile, ceramics, castings, hard abrasives

P/NRB6TCRB8TC

SUPER-CUT PortableBandsaw BladesBi-Metal Steel

METAL CUTTINGLENGTH44-7/8"44-7/8"44-7/8"44-7/8"

TEETH10141824

APPLICATIONHeavier metalsMetals over 1/8", pipeMetal, conduit, tubingFine cutting, thin metal

P/NBSB10BSB14BSB18BSB24

� Packed 3 per box.� Dewalt, Milwaukee, Greenlee, Ridgid.

34 | (800) 228-0541

SUPER-CUT DemolitionReciprocating Saw BladesBi-Metal with Flexible Alloy Body

DEMOLITION WOOD CUTTINGLENGTH6"9"12"

WIDTH7/8"7/8"7/8"

TEETH666

APPLICATIONRough-in wood cutting, demolition workRough-in wood cutting, demolition workRough-in wood cutting, demolition work

P/NRB606HDRB906HDRB1206HD

DEMOLITION COMBO CUTTINGLENGTH6"9"12"

WIDTH1"1"1"

TEETH10/1410/1410/14

APPLICATION.050" blade for metal composites, masonite, metals, wood.050" blade for metal composites, masonite, metals, wood.050" blade for metal composites, masonite, metals, wood

P/NRB6114RB9114RB12114

DEMOLITION METAL CUTTINGLENGTH6"6"9"9"

WIDTH1"1"1"1"

TEETH14181418

APPLICATION.042" heavy-duty metal cutting.042" heavy-duty metal cutting.042" heavy-duty metal cutting.042" heavy-duty metal cutting

P/NRB614HDRB618HDRB914HDRB918HD

� All blades are packaged (5) per vinyl pouch.

Bi-Metal Hand HacksawBlades and FrameMETAL CUTTINGLENGTH12"12"12"12"12"

WIDTH1/2"1/2"1/2"1/2"Adjustable 10" - 12" Hacksaw Frame, flush angle cut,light weight, spare blade storage

TEETH14182432

APPLICATIONHeavier metals, anglesMetal over 1/8", pipe, conduitGeneral purpose – 1/16" - 1/4"Thin metal, fine cutting

P/NHHSB14HHSB18HHSB24HHSB32HSF

(800) 228-0541 | 35

SUPER-CUTSabre Saw BladesBi-Metal Steel

WOOD CUTTING – 1/4" UNIVERSAL SHANKLENGTH3-1/2"3-1/2"3-1/2"

TEETH61010

APPLICATIONThick wood, fast cuttingSmooth cutting – woodWood scroll

P/NJS6JS10JSS10

METAL CUTTING – 1/4" UNIVERSAL SHANKLENGTH3"3"3"3"

TEETH14182432

APPLICATIONMetal over 1/4", plastic, fiber boardMetal over 1/8", conduit, tubingThin metal, fine cutting, panelsExtra-fine cutting

P/NJS14JS18JS24JS32

� All blades are packaged (5) per vinyl pouch.

WOOD CUTTING – BOSCH SHANKLENGTH3-3/4"3-3/4"3-3/4"

TEETH61010

APPLICATIONFast cutting, thick material, woodGeneral purpose woodSmooth cut, scroll

P/NBJS6BJS10BJS10S

METAL CUTTING – BOSCH SHANKLENGTH3"3"3"3"

TEETH14182432

APPLICATIONMetal over 1/8", plastic, fiberglassMetal over 18 gauge, plastic, fiberglassThin metal, fine cuttingExtra-fine cutting

P/NBJS14BJS18BJS24BJS32

36 | (800) 228-0541

Hole Saw AdaptersVariable PitchBi-Metal CobaltHole SawsSmooth cutting, 1.5" cutting depth

TYPE HSSIZE9/165/811/163/413/167/815/1611-1/161-1/81-3/161-1/41-5/161-3/81-7/161-1/21-9/161-5/81-11/161-3/41-13/161-7/822-1/162-1/8

P/NHS916HS58HS1116HS34HS1316HS78HS1516HS1HS1116HS118HS1316HS114HS1516HS138HS1716HS112HS1916HS158HS11116HS134HS11316HS178HS2HS2116HS218

P/NHS214HS2516HS238HS212HS2916HS258HS234HS278HS3HS318HS314HS338HS312HS358HS334HS378HS4HS418HS414HS412HS434HS5HS512HS6

SIZE2-1/42-5/162-3/82-1/22-9/162-5/82-3/42-7/833-1/83-1/43-3/83-1/23-5/83-3/43-7/844-1/84-1/44-1/24-3/455-1/26

� Cobalt HSS cutting edge – RC 67 hardness.� 4/6 variable pitch teeth.� Cuts stainless steel, metal, wood, nail imbedded wood,

fiberglass, composite and plastic.� Accepts standard arbors.

SHANK3/8"

7/16"

7/16"

3/8"

TYPE HSAFITS HOLE SAWS9/16" – 1-1/8"

1-1/4" – 6"

9/16" – 1-1/8"

1-1/4" – 6"

P/NHSA1

HSA2*

HSA4

HSA10*

Hole Saw DrillsFITS ADAPTERSAll EXCEPT HSA4HSA4 and all thru hole adapters

TYPE HSDP/NHSD1 (short)HSD2 (long)

*Quick release style

SIZE12" extension 1/2" chuck12" extension 3/8" chuck

HOLE SAW EXTENSIONSP/NHSE1HSE2

(800) 228-0541 | 37

Hole Saw Kits14-PIECE KITGeneral purpose assortmentincludes 3/4, 7/8, 1, 1-1/4, 1-3/8,1-1/2, 1-3/4, 2, 2-1/4, 2-1/2, and3 hole saws, and 3 arbors.

INDUSTRIAL MAINTENANCE KITP/NHSKM-14

8-PIECE KITPlumber’s Kit includes 3/4, 7/8,1-1/8, 1-1/2, 1-3/4, and 2-1/4hole saws, and 2 arbors.

P/NHSKP-8

PLUMBER’S KIT

8-PIECE KITElectrician’s Kit includes 7/8,1-1/8, 1-3/8, 1-3/4, 2 and 2-1/2hole saws, and 2 arbors.

ELECTRICIAN’S KITP/NHSKE-8

16-PIECE KITPlumber’s 7/8, 1-1/8, 1-3/8, 1-1/2,1-3/4, 2, 2-1/2, 3, 3-5/8, 4-1/8, and4-1/2 hole saws, 3 arbors, 12"extention, and extra pilot drill.

P/NHSKE-16

MASTER ELECTRICIAN’S KIT

38 | (800) 228-0541

Maxi-CutDiamond Blades

Circular Hand Saw

Tile Saw

Brick Saw

Handheld High Speed Saw

Hand Held Grinder

Types of equipment typically usedwith Maxi-Cut Diamond Blades.

Walk Behind Saw

Floor Grinder

Rail Saw

Core Driller

Product Coding

Running SpeedHigh SpeedLow Speed

RunWet or DryWet Only

Bond1 – Super Soft

2 – Soft3 – Medium4 – Hard

W – Wood

PremiumTurbo Diamond BladeSEGMENT HEIGHT: 10 mmSIZE44.578101214

P/NT4XT45XT7XT8XT10XT12XT14X

THICKNESS.080.080.095.095.095.125.125

ARBOR7/8-5/87/8-5/8DM-5/8DM-5/87/8-5/81-20mm1-20mm

General purpose cutting for the contractor who is looking fora fast cutting wheel for all types of building materials. Thisseries is ideal for cutting brick, block, tile, marble, granite,bluestone and concrete. Not recommended for reinforcedconcrete, asphalt, or green concrete. Use wet or dry.

(800) 228-0541 | 39

Super ProTurbo Diamond BladeSEGMENT HEIGHT: 12 mmSIZE44.578101214

P/NT4SPT45SPT7SPT8SPT10SPT12SPT14SP

THICKNESS.080.080.095.095.095.110.110

ARBOR7/8-5/87/8-5/8DM-5/87/8-5/87/8-5/81-20mm1-20mm

Our SUPER PRO will provide the extra speed demanded byprofessional users. Also the 30/40 grit premium diamonds inthe segments provide extremely smooth cuts. These long lifeblades are considered the best on the market today. Use thisdiamond blade for cutting granite, marble, brick, block, tile,concrete and other masonry materials. Use wet or dry.

The Pro ShredderTurbo Diamond BladeSEGMENT HEIGHT: 8 mmSIZE44.578101214

P/NPS4PS45PS7PS8PS10PS12PS14

THICKNESS.080.080.095.095.095.125.125

ARBOR7/8-5/87/8-5/8DM-5/8DM-5/87/8-5/81-20mm1-20mm

We manufactured this blade to meet the demands ofcontractors looking for a consistently good working tool.The wavy steel core assists in air circulation and a frictionresistant run which prolongs blade life and increases cuttingspeed. Cuts: granite, cured concrete and other masonrymaterials. Use wet or dry.

40 | (800) 228-0541

Premium SegmentedHigh Speed Diamond BladeSEGMENT HEIGHT: 10 mmSIZE44.57810

P/NDS4XDS45XDS7XDS8XDS10X

THICKNESS.080.080.095.095.095

ARBOR7/8-5/87/8-5/8DM-5/8DM-5/87/8-5/8

Our .395 segmented height (10mm) Supreme Blades areamong the finest on the market! Outlasts most of thecompetition by 30% to 40%. A heat treated steel coreprovides extreme blade strength for deep cuts. Perfect forthe contractor who wants quality at a reasonable price. Trythese today! Medium bond, for general purpose brick, blockand concrete. Use wet or dry.

SEGMENT HEIGHT: 10 mmSIZE12121414X Series Blades are Standard GradePR Series Blades are Premium Grade

P/NDS12XDS12PRDS14XDS14PR

THICKNESS.125.125.125.125

ARBOR1-20mm1-20mm1-20mm1-20mm

This is our super duty work horse it is ideal for cuttingall types of surfaces. Perfect for restoration yards andcontractors who need low up front costs, fast cutting speedwith medium blade life. The DS is by far and away our mostpopular blade. Don’t take our word for it. Find out for yourselfjust what makes this our most popular item. Medium bond,for general purpose masonry, brick, block and light-dutycured concrete. Use wet or dry.

Tough Cut ProHigh Speed Diamond Blade

(800) 228-0541 | 41

T-SegmentHigh Speed Diamond BladeSEGMENT HEIGHT: 10 mmSIZE44.5781012121414All PR Series Blades are Premium Grade

P/N4TSEG45TSEG7TSEG8TSEG10TSEG12TSEG12TSEGPR14TSEG14TSEGPR

THICKNESS.085.085.095.095.095.125.125.125.125

ARBOR7/8-5/87/8-5/8DM-5/8DM-5/87/8-5/81-20mm1-20mm1-20mm1-20mm

Our Supreme T-SEG PRO turbo segmented design hasbeen copied by many other companies but none can masterthe supreme quality of this blade. The lightning speed of aturbo with the life of a segmented blade is sure to get thetoughest jobs done with ease. Laser welded. Ideal forconcrete pipe, reinforced concrete pipe, pavers, block, claybrick with iron spots, granite. Even cuts refractory brick. Usewet or dry.

SEGMENT HEIGHT: ?? mmSIZE12141214

P/NVR12VR14VRA12VRA14

THICKNESS.???.???.???.???

ARBOR????????????

This is our super duty work horse it is ideal for cuttingall types of surfaces. Perfect for restoration yards andcontractors who need low up front costs, fast cutting speedwith medium blade life. The DS is by far and away our mostpopular blade. Don’t take our word for it. Find out for yourselfjust what makes this our most popular item. Medium bond,for general purpose masonry, brick, block and light-dutycured concrete. Use wet or dry.

VR High SpeedDiamond Blade

42 | (800) 228-0541

SEGMENT HEIGHT: 15 mmSIZE1414181824All PR Series Blades are Premium Grade

P/NC14AC14PRC18AC18PRC24PR

THICKNESS.125.187.125.135.155

ARBOR1"1"1"1"1"

The PRO-BLADE is truly the finest quality professionalblade in the market. With a 40% diamond concentration anda 15mm segment height, this blade cuts 30% faster andlasts up to 40% longer. Blade specifications meet or exceeddemands of Department Of Transportation andProfessional Concrete/Asphalt Cutters. These blades areperfect for high horsepower and low RPM walk-behind saws.Soft bond. Length of cuts: 6,000 to 18,000 inch feet. Usewet only – do NOT run dry. Cuts: cured concrete, hardaggregate, and similar materials.

Cured ConcretePro Diamond Blade

SEGMENT HEIGHT: 15 mmSIZE1414181824All PR Series Blades are Premium Grade

P/NAG14AAG14PRAG18AAG18PRAG24PR

THICKNESS.125.187.125.135.155

ARBOR1"1"1"1"1"

The PRO-BLADE is truly the finest quality professionalblade in the market. With a 42% diamond concentration anda 15mm segment height, this blade cuts 30% faster andlasts up to 40% longer. Blade specifications meet or exceeddemands of Department Of Transportation and ProfessionalConcrete/Asphalt Cutters. These blades are perfect for highhorsepower and low RPM walk-behind saws. Hard bond.Length of cuts: 20,000 to 60,000 inch feet. Use wet only –do NOT run dry. Cuts: asphalt and greenconcrete.

Asphalt / Green ConcretePro Diamond Blade

(800) 228-0541 | 43

SEGMENT HEIGHT: 10 mmSIZE1214

P/NDS12ASPDS14ASP

THICKNESS.125.125

ARBOR1-20mm1-20mm

This blade is our most popular high-speed asphalt blade.With a 37% diamond concentration, and 3/8” segmentheight, this blade will cut between 16,000 to 20,000 inchfeet. Special U slot gullet with undercut protection will giveyou enormous use of segment. If you want the best, try theCheetah-2. Also ideal for walk-behind saws. Cuts: asphalt,light weight block, green concrete, & other abrasivematerials. Run blades wet or dry.

AsphaltPro Diamond Blade

Super SonicCombination Blade forConcrete and AsphaltSEGMENT HEIGHT: 9/14 mmSIZE1214

P/NCORPO-12CORPO-14

THICKNESS.125.125

ARBOR1-20mm1-20mm

New Technology: Cuts the widest variety of materials onthe market. This highly aggressive diamond blade is builtwith a mixed variety of diamond grit sizes in the segments.Drop-segs and a vented core help this blade drive throughmany surfaces with ease. Cuts: cured concrete, brick, block,concrete pipe, green concrete, pavers-over-sand, asphaltand asphalt-over-concrete. Use wet or dry.

44 | (800) 228-0541

SEGMENT HEIGHT: 10 mm

This premium Power Streak Series diamond blade utilizesspecial grade diamonds for very smoothing cutting and longlife. The 10mm height rim yields long blade life. Perfect forgranite, ceramics, stone, porcelain, tile, limestone and similarsurfaces. Use wet only except for 4, 4.5 and 5 inch – thesecan be used wet or dry.

Tile/Limestone/CeramicDiamond BladeSIZE44.5578101214

P/NTL4XTL45XTL5XTL7XTL8XTL10XTL12XTL14X

THICKNESS.060.060.060.080.080.080.110.110

ARBOR7/8-5/87/8-5/87/8-5/8DM-5/85/85/811

SEGMENT HEIGHT: 10 mmP/NTK4TK7

THICKNESS.250.250

ARBOR7/8-5/87/8-5/8

These 10mm segment height tuck point blades are ideal forthe economy minded contractor that has a large restorationproject to tackle and needs low up-front costs. This EconoTP performs extremely well for the investment, providing fastspeed and good life. Use wet or dry.

Econ One Multi/Tile/Tuck Pointer Diamond BladeSIZE47

(800) 228-0541 | 45

SIZE4477

SINGLE ROW GRNDING CUPP/NCW4ACW4CW7ACW7

ARBORThreaded 5/8-11No thread 7/8-5/8Threaded 5/8-11No thread 7/8-5/8

These SH Single Row diamond grinding cups are designedfor rough work and rapid stock removal of concrete, stoneand masonry. This style is considered one of the best on themarket today! Available in either 5/8x11 thread design or7/8x5/8 – please specify when ordering. Use wet or dry.

Tornado-I Diamond CupGrinding Wheel

SIZE4477

DOUBLE ROW GRNDING CUPP/NCW4DACW4DCW7DACW7D

ARBORThreaded 5/8-11No thread 7/8-5/8Threaded 5/8-11No thread 7/8-5/8

Tornado-I I Diamond CupGrinding Wheel

These SH Double Row diamond grinding cups arespecifically designed for fast stock removal of concrete,stone and masonry, with very low dust. An excellent choicefor finer finish grinding. Available in either 5/8x11 threaddesign or 7/8x5/8 – please specify when ordering. Use wetor dry.

46 | (800) 228-0541

SIZE1/23/411-1/81-1/41-3/81-1/21-5/81-3/423

P/NDTB12DTB34DTB100DTB118DTB114DTB138DTB112DTB158DTB134DTB200DTB300

DRILL DEPTH2"2"2"2"2"2"2"2"2"2"2"

These thin-wall professional core bits make drilling smooth,precise holes clean and very easy. The 3/8” diameter drill bitpilots the CH GT Crown for precise cutting work on granite,marble, stone and ceramic tile. The bit fits easily in allelectric drill chucks. Use wet or dry.

Pilot Crown Pro PlusCore Bits

SIZE3/47/811-1/41-1/222-1/233-1/244-1/25678910121416

SEGMENT HEIGHT: 7.5 mmP/NPB34PB78PB1PB114PB112PB2PB212PB3PB312PB4PB412PB5PB6PB7PB8PB9PB10PB12PB14PB16

ARBOR-THREADED1-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 71-1/4" – 7

These professional grade core bits are manufactured toexacting specifications and built for a variety of drilling jobs.Designed to tackle a broad range of applications, includingmedium reinforced concrete and other masonry materials.7.5mm segment height. Wet cutting.

Pro Core Bits –Wet 17" OAL, 14.5" Inside

(800) 228-0541 | 47

M2 LONG-LIFE CARBIDE TIPS

RENEGADE I M2 carbide tipped blades are manufacturedfor high performance. The blade’s teeth are tipped withlong-life M2 carbide providing excellent blade service.� High-performance do-it-yourself quality� M2 carbide for long blade life� Thin kerf design for smooth, fast cutting� Precision expansion slots for cooling� 6X more durable due to reinforced shoulders

Cuts all types of wood, plywood, particle board, chipboard,wallboard and plastics. Lifetime, no-risk guarantee!

Renegade ICarbide Tipped BladeSIZE7-1/47-1/48-1/48-1/4101010

P/NRenegade1-7-24Renegade1-7-40Renegade1-8-24Renegade1-8-40Renegade1-10-40Renegade1-10-60Renegade1-10-80

DESCRIPTION7.25" x 24 tooth7.25" x 40 tooth8.25" x 24 tooth8.25" x 40 tooth10" x 40 tooth10" x 60 tooth10" x 80 tooth

SIZE6" x 5/8" – 1112" x 5/8" – 116" x 1-1/4" – 712" x 1-1/4" – 71/4" to 5/8" – 11

P/NEX658EX1258EX6114EX12114RADAD

Pro Core Bits –Extensions/Adapters

DESCRIPTIONExtensionExtensionExtensionExtensionAdapter

48 | (800) 228-0541

New England Twist Drill333 North Montello StreetBrockton, MA 02301

Telephone (800) 228-0541(508) 897-0678

Fax (800) 722-8243(508)-897-0681

Web www.jacksonsales.com

Catalog No. 0107

2007Catalog

The Power Tool Accessory Specialist

Date post:	09-Jul-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

The Power Tool Accessory Specialist 2007 Catalog...These specially designed drills are excellent for...

Documents