WWW.DYNASTYES.COM1-337-367-8344

PREDATOR® PRODUCT DATA SHEET

The Predator® patented section milling technology was developed to meet the need to mitigate sustained casing pressure, provide the best environment for barrier placement and save cost through less rig time by saving trips in the well. The Predator® enables stabilized multiple string section milling while ensuring no harm to outer casing strings regardless of casing eccentricities.

• Single, dual and triple casing string section milling, pilot milling & casing ID clean out

• 2 trip section mill = less rig time = cost savings

• Section Milling design for casing sizes 7" - 30" OD

• Designed for No harm to the outer casing strings when section milling

• Predator® designed for long window lengths in excess of 100M, 300’ +

• Overall short BHA length (<14’) compared to traditional section milling BHA’s 90’ +

• Predator® is Deepwater ready utilizing high tensile strengths

• Predator® can be custom designed to fit your specific well geometry

• Engineered for high ROP with light weight on bit, low torques & high RPM

• Circulation & jetting design thru the bottom of the tool provides easy swarf management

PREDATOR® FEATURES

WWW.DYNASTYES.COM1-337-367-8344

PREDATOR® PRODUCT DATA SHEET

Enter Casing Sizes

7-5/8” OD9-5/8” OD

10-3/4” OD11-3/4” OD

9-5/8” OD thru

11-7/8” OD

Section Mill Scrub/Polish

5-3/4” OD Body(5 3/4” OD Closed) (14” OD Sweep Open)

7” OD7-5/8” OD8-5/8” OD9-5/8” OD

9-5/8” OD thru

11-7/8” OD

8-5/8” OD thru

13-5/8” OD Casings

6-3/8” OD Body(6-3/8” OD Closed)(14” OD Sweep Open)

7-5/8” OD thru

13-5/8” OD Casings

8.125” OD Body(8.125” OD Closed)(20” OD Sweep Open)

9-5/8” OD10-3/4” OD11-3/4” OD13-3/8” OD

9-5/8” OD thru

16” OD

10-3/4” OD thru

20” OD Casings

11-1/2” OD Body(11-1/2” OD Closed)(30-1/2” OD Sweep Open)

13-3/8” OD16” OD

18-5/8” OD10” OD

16” OD thru

30” OD

16” OD thru

30” OD Casings

PREDATOR® SWEEP CHART