The solution for airless mechanical application
Ready-to-use spray-applied leveller, skim coating and jointing compoundSpecial airless Formulation - May be applied manually
INTENDED USEInterior applications: walls and ceilings
For preparing substrates and jointing plasterboards before decoration (light-weight wall coverings, matt or satin gloss finish paints)
MAXIMUM APPLICATION THICKNESS3mm (bevelled edges)
RECOMMENDED NOOZLEAirless Machine0,027’’ - 0,031’’ ; 50°- 60°
Product advantages
✚ Special airless application
✚ Multi-purpose levelling, skim coating and jointing compound
✚ Simple and fast application
✚ Minimal shrinkage
✚ Easy to trowel
AIRLISS J
seau plastique
25 kg
INTENDED USEInternal walls and ceilings
For preparing substrates before decoration (light-weight wall coverings, matt or satin finish paints)
Ideal for application onto a flat substrate such as plasterboard
MAXIMUM APPLICATION THICKNESS1 mm
RECOMMENDED NOOZLEAirless Machine0,023’’ - 0,027’’ ; 50°- 60°
✚ Skim coats and surfaces new drywall in a single spray application
✚ Requires no troweling: slight orange-peel appearance
✚ Very white and fine
✚ Can be covered by any existing matt or satin finish paint
Product advantages
Ready-to-use water-based spray-applied skim coatingSpecial airless formulation
AIRLISS F
seau plastique
25 kgsac
25 kg
Lightweight ready-to-use, spray-applied skim coating levelerSpecial airless formulation
✚ Very good levelling properties
✚ Easy to apply
✚ Easy to sand
✚ For all stages of plasterboard jointing
✚ Fine finish
Product advantagesINTENDED USEInterior applications (walls, ceilings or partitions)
For preparing substrates and plasterboard joints before decoration (light-weight wall coverings, matt finish paints)
MAXIMUM APPLICATION THICKNESS3 mm
RECOMMENDED NOOZLEAirless Machine0,031’’ - 0,035’’ ; 50°- 60°
AIRLISS LIGHT
sac
15 L
Product advantages
✚ Approximately 4 times quicker to apply than conventional traditional gypsum plaster
✚ Very easy to apply
✚ Easy to sand
✚ Very white
✚ May be applied manually
✚ Most universal product - Suitable for leveling and finishing coat
INTENDED USEInternal walls and ceilings
For preparing substrates before decoration (light-weight wall coverings, matt or satin finish paints)
MAXIMUM APPLICATION THICKNESS5 mm
RECOMMENDED NOOZLESpray Machine5 to 6 ØAirless Machine0,031’’ - 0,035’’ ; 50°- 60°
Ready-to-use spray-applied levellerSpecial airless formulation
AIRLISS G
seau plastique
25 kgsac
25 kg
Product advantages
✚ Good value for money
✚ Easy to apply
✚ Long working time
✚ Apply through, up to 80 m of high pressure hose with appropriate machine
✚ White
INTENDED USEEspecially recommended for large construction sites and fixed spray stations
MAXIMUM APPLICATION THICKNESS2 mm
RECOMMENDED NOOZLEAirless Machine0,033’’ - 0,037’’ ; 50°- 60°
BAG MAX SReady-to-use spray-applied smoothing leveller
ULTRA500 kg
Lightweight ready-to-use spray-applied skim coating leveler, and jointing compoundManual and mechanical application (Airless and BAZOOKA)
Product advantages
✚ Very good levelling properties✚ Easy to apply✚ Easy to sand✚ For all stages of plasterboard
jointing✚ Multipurpose: suitable for
manual and mechanical application (Airless and BAZOOKA)
✚ Allows plasterboard finishing with any level of surface quality (Q1-Q4)
✚ Fine finish
AIRLISS J LIGHT
INTENDED USEInterior applications (walls, ceilings or partitions)
For preparing substrates and plasterboard joints before decoration (light-weight wall coverings, matt finish paints)
MAXIMUM APPLICATION THICKNESS3 mm
RECOMMENDED NOOZLEAirless Machine0,031’’ - 0,035’’ ; 50°- 60°
seau plastique
20 kg
INTENDED USEIdeal for coating common substrates Particularly adapted for use with pipes of great length
MAXIMUM APPLICATION THICKNESS2 mm
RECOMMENDED NOOZLEAirless Machine0,027’’ - 0,031’’ ; 50°- 60°
✚ Good quality / price ratio
✚ Long open time
✚ Excellent gliding properties
✚ White
Product advantages
Water-borne smoothing coating paste to be sprayed for indoor use
AIRLISS C
seau plastique
25 kgsac
25 kg
Product advantages
✚ Skim coats and surfaces new drywall in a single spray application
✚ Requires no troweling: slight orange-peel appearance
✚ Very white and fine
✚ Apply through, up to 80 m of high pressure hose with appropriate machine
✚ White
INTENDED USEEspecially recommended for large construction sites and fixed spray stations
MAXIMUM APPLICATION THICKNESS1 mm
RECOMMENDED NOOZLEAirless Machine0,019’’ - 0,027’’ ; 50°- 60°
BAG MAX FReady-to-use spray-applied skim coating
ULTRA500 kg
Product advantages
✚ Smooth application with Brush or Roller
✚ Opacifying properties
✚ Forms a uniform base prior to decoration
✚ Excellent quality/price ratio
Drywall primer for indoor use
INTENDED USEStabilizers substrate and improves adhesion before applying BAGAR or PRESTONETT® coatings
RECOMMENDED NOOZLEAirless Machine0,015’’ - 0,019’’ ; 30°- 60°
Mechanical or ManualApplication
PRIM
fut plastique
15 L
Ready-to-use water-based mechanically-applied levellerSpecial airless formulation
INTENDED USEInterior applications (walls, ceilings or partitions)
For preparing substrates before decoration (light-weight wall coverings, matt or satin finish paints)
MAXIMUM APPLICATION THICKNESS6 mm
RECOMMENDED NOOZLESpray Machine6 to 10 ØAirless Machine≥ 0,035’’ ; 50°- 60°
Product advantages
✚ High-viscosity
✚ Easy to apply
✚ Ideal for a leveling/base coat
✚ Easy to sand
✚ Multipurpose: suitable for manual or mechanical application (Airless or snail pump machine)
AIRLISS SG
seau plastique
20 kgsac
20 kg
Product advantages
✚ Ideal for concrete
✚ Good levelling properties
✚ Easy to apply
✚ Easy to sand
✚ Apply through, up to 80 m of high pressure hose with appropriate machine
✚ Available in White or Grey finish (similar to the color of concrete)
INTENDED USEEspecially recommended for large construction sites and fixed spray stations
MAXIMUM APPLICATION THICKNESS3 mm
RECOMMENDED NOOZLEAirless Machine0,035’’ - 0,045’’ ; 50°- 60°
BAG MAX SBReady-to-use spray-applied leveller
ULTRA500 kg
Beis
sier
sAs
- rCs
Mel
un 9
06 3
50 2
28 -
Phot
os et
des
CriP
tifs
non
Con
trAC
tuel
s - 0
2/20
16
www.beissier.euStay connected!
www.youtube.com/user/EnduitsBeissier
Beissier UK4th Floor · 300 High Holborn · London WC1 7JHFax : 020 7092 6698 · [email protected]
Customer Service : 020 7092 6696
PRIMER AIRLESS MACHINE BAG MAX
BAGAR PRIM BAGAR AIRLISS SG BAGAR AIRLISS G BAGAR AIRLISS LIGHT BAGAR AIRLISS C BAGAR AIRLISS F BAGAR AIRLISS J BAGAR AIRLISS J LIGHT BAG MAX SB BAG MAX S BAG MAX F
USE
Impression ■ ■
Levelling ■ ■ ■
Skim-coating ■ ■ ■ ■ ■ ■ ■
Skim-coating, Extra Fine Finish ■ ■ ■ ■ ■ ■
Jointing compound ■ ■ ■
SUBSTRATES*
Concrete ■ ■ ■ ■ ■ ■ ■ ■
Cellular concrete ■ ■ ■ ■ ■ ■ ■ ■
Cement ■ ■ ■ ■ ■ ■ ■ ■
Concrete Bloc ■ ■ ■ ■ ■ ■
Brick ■ ■ ■ ■ ■ ■
Plaster ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Plaster Board ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Old Paint substrates ■ ■ ■ ■ ■ ■ ■ ■ ■
Old sprinkle effect ■ ■ ■
Primed Wood ■ ■
Glass cloth ■ ■ ■ ■ ■ ■
OVERCOAT
Light-weight wall coverings ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Matt paint ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Satin paint ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Gloss paint ■
TECHNICAL DATA
Maximum application Thickness - 6 mm 5 mm 3 mm 2 mm 1 mm 3mm (bevelled edges) 3 mm 3 mm 2 mm 1 mm
Average Consumption from 1 to 2,5kg/m² from 0,8 to 1,5kg/m² 0,45 kg/ml depending on substrate roughness and the desired finish from 0,6 to 1 kg/m² from 0,4 to 0,6kg/m² Full-surface application : 0,8 kg/m²
Joint strip application : 0,350 g/ml from 0,7 to 1,3 kg/m² from 0,8 to 1,5kg/m² from 0,6 to 1kg/m² 0,6kg/m²
Spray Machine - 6 to 10 Ø 5 to 6 Ø - - - - - - - -
Airless Machine 0,015’’ - 0,019’’ ; 30°- 60° ≥ 0,035’’ ; 50°- 60° 0,031’’ - 0,035’’ ; 50°- 60° 0,031’’ - 0,035’’ ; 50°- 60° 0,027’’ - 0,031’’ ; 50°- 60° 0,023’’ - 0,027’’ ; 50°- 60° 0,027’’ - 0,031’’ ; 50°- 60° 0,031’’ - 0,035’’ ; 50°- 60° 0,035’’ - 0,045’’ ; 50°- 60° 0,033’’ - 0,037’’ ; 50°- 60° 0,019’’ - 0,027’’ ; 50°- 60°
Fire-Class Certificate available on request - M0 on M0 Euroclass A2-S1,D0 Euroclass A2-S1,D0 M0 on M0 M0 on M0 Euroclass A2-S1,D0 Euroclass A2-S1,D0 Euroclass A2-S1,D0 M0 on M0 M0 on M0
Equipment Airless sprayer (min. output 7 L/min) + container kit 2 inch (according to the machine manufacturer)
* Substrates must me hard, cohesive, clean, sand and dry. Refer to the data sheets or the FDS for all complementary information.
Recommended Noozle