THE ZERO ENERGY POOL
SOLAR ELECTRICITY + POOL HEATING
NAT I O NA L
ONE FOOTPRINT, TWO SOLUTIONSA HYBRID PANEL THAT SIMULTANEOUSLY PRODUCES ELECTRICITY AND HEATING FOR YOUR SWIMMING POOL
The electricity generated by the high efficiency photovoltaic (PV) cells can cover all the electricity needs of your swimming pool (in particular, the pool equipment and in some cases, the heat pump). Any surplus electricity can be self-consumed in your home, or returned into the grid for a feed-in tariff or a net-metering program.
The internal heat exchanger allows direct connection to your pools water circuit. As the pool water flows through the heat exchanger, the water is heated whilst simultaneously cooling the panel, increasing the efficiency of the PV electrical generation.
THE BEST THINGS IN LIFE ARE FREEREDUCE YOUR ONGOING POOL HEATING COSTS TO ZERO
HOW DOES DUALSUN WORK?A TWO-IN-ONE SOLAR SOLUTION
ENHANCED PERFORMANCEDualSun’s unique design increases electrical output
100% RENEWABLE ENERGY
Self-sustaining energy and heating
production
PERFORMANCE OPTIMISATION
A range of solutions to maximise the use
of your system
EUROPEAN ENGINEERINGQuality French
design and manufacturing
RETURN ON INVESTMENTA responsible
investment that pays for itself
ELECTRICITYThe conversion of light into electricity is called the
photovoltaic effect. Solar panels convert energy from sunlight into direct current (DC) electrical energy, which is
then changed into alternating current (AC) for your home’s electrical consumption. Excess energy can be fed into a
battery storage system for later use, or returned to the grid for a feed-in tariff or a net-metering program.
WATERAs pool water is circulated through the heat exchanger
integrated into the underside of the photovoltaic surface, it absorbs the surplus energy created by the sunlight and photovoltaic effect. As a result, the water is heated and
returned to the pool whilst simultaneously cooling the panel and allowing the PV electrical generation to be maintained
at peak performance.
100% RENEWABLE ENERGY
THE ZERO ENERGY POOL
There’s no doubt that your pool contributes a significant amount towards your electricity bill during swimming season. Whilst this may pose economic challenges to the average pool owner, the increasing impact on the environment’s natural resources has long lasting and far reaching effects.
Heatseeker DualSun provides a powerful solution for the swimming pool and spa industry, and more importantly for pool owners. The simultaneous generation of electricity and heated water allows the ongoing energy consumption of a pool to be neutralised, and avoid any government legislation that could negatively impact the industry.
Convert your investment into the zero energy pool, freeing yourself from the electricity companies by creating your own clean, reliable and 100% renewable energy.
STC SOLAR REBATE
The Australian Government Small-scale Renewable Energy Scheme creates a financial incentive for individuals and small businesses to install renewable energy systems such as DualSun. It does this through the creation of small-scale technology certificates (STCs).
STCs are provided ‘up front’ for the systems’ expected power generation over a 15 year period or, from 2017, from the installation year until 2030 when the scheme ends.
Generally, homeowners who purchase a DualSun system assign the right to create their certificates to a supplier/installer in return for a lower purchase price.
The number of STCs that can be created per system is based on its geographical location, installation date, and the amount of electricity that is generated or displaced by the system.
As a guide, one STC is equal to one megawatt hour of eligible renewable electricity.
* Commercial installations may be entitled to Large-scale generation certificates based on the amount of eligible renewable electricity they produce. For further information, please speak to your Supreme Heating representative.
A SOLAR PANEL SPECIFICALLY DESIGNED FOR
POOLS
INNOVATIVE HEAT EXCHANGER
Completely integrated into the panel, allowing for excellent heat transfer between the
photovoltaic surface and the water flow.
ULTRA THIN DESIGN Standard dimensions of a
photovoltaic panel (156mm cell, 60 cells).
HIGH PERFORMANCE PHOTOVOLTAICS
High efficiency monocrystalline cells cooled
by water circulation.
ENHANCED PERFORMANCE
THE EVOLUTION OF SOLAR POWER
DualSun’s hybrid solar PV thermal technology is based on two principles:
1. Standard PV panels generate much more heat (82.8%) than electricity (17.2%) when exposed to the sun.
2. The efficiency of PV panels decreases as the surface temperature increases.
The innovative DualSun hybrid solar panel utilises the excess heat from the PV cells, transferring it to the heat exchanger to produce heated water. In the process, the water circulation cools the PV cells, increasing efficiency by up to 20%. Therefore, a DualSun installation can utilise up to 4 times more energy than a standard photovoltaic installation.
Standard photovoltaic production
DualSun photovoltaic gain
DualSun thermal production
Heatseeker DualSunTotal Savings = $66,560
Standard PV with the use of an inverter heat pumpTotal Savings = $33,495
Compared to a standard PV installation with the use of an inverter heat pump, Heatseeker DualSun will save youan additional $33,065 over the course of 20 years
YOUR SAVINGS OVER 20 YEARSEnergy expense savings over 20 years
Balance of Electrical Production$33,495
Electrical Production$46,515
Pool heating equivalent to use of inverter heat pump $13,020
Electrical consumption of inverter heat pump $13,020
DualSun Photovoltaic Gain $7,025
RETURN ON INVESTMENTDualSun VS Standard PV with use of a heat pump
Initial InvestmentAnnual Savings
Your investment pays for itself in 5.5 years
Heatseeker DualSun= $18,500= $3,328
Initial InvestmentAnnual Savings
Your investment pays for itself in 9.5 years
Standard PV with heat pump= $16,000= $1,675
DUALSUN ENERGY PRODUCTIONEnergy production over 20 years
Total: 335.6 MWh over 20 years
Electricity - 151.1 MWh
Heated Pool Water - 184.5 MWh
The equivalent of driving 13,555km/year in car.
The equivalent of 30.13 tons CO2 over 20 years.
The equivalent of planting 271 trees over 20 years.
Turn your investment into the zero energy pool with
Heatseeker DualSun
DualSun average daily production 20.7kWh/day
Average swimming pool requirements (pumps, lighting, sanitation) approx 10kWh/day
An investment in DualSun is an investment in quality. With over 700 successful installs since the company’s inception, DualSun has experienced a growth of 573% between 2013 and 2016 with
over 10,000m2 worth of panels being sold.
Created in 2010 by two engineers from one of France’s top engineering schools, Ecole Centrale Paris, the DualSun team is now based in Marseille where the sun reigns supreme.
Composed of young and dynamic engineers and designers with a passion for solar energy and a devotion to deliver the best hybrid solar solution for a transitioning
energy world, the DualSun team is supported by national and regional governments as well as numerous prestigious institutions.
With a no-compromise approach to quality, all manufacturing is performed exclusively in France by trusted suppliers.
With offices Australia-wide, Supreme Heating is DualSun’s exclusive distributor in the Australasian region.
RETURN ON INVESTMENTPERFORMANCE OPTIMISATION
QUALITY EUROPEAN ENGINEERING
The Heatseeker DualSun system not only allows you to sleep easy at night knowing you’re making the responsible choice when it comes to powering your pool, it also provides an excellent return on your investment through tremendous savings in energy costs of up to $66,560 over the course of 20 years.
Once your Heatseeker DualSun panels have collected energy from the sun, that energy needs to be converted from DC electricity to AC electricity for daily use in your home. DualSun is compatible with a range of options to help you achieve this. The correct option for you will depend on your individual needs, and will be discussed with you at time of consultation.
STRING INVERTERSString inverters work by collecting
the energy generated by your solar panels and converting the DC electricity to AC electricity through
a central location. Whilst string inverters are the most inexpensive option, they only perform as well as
the lowest-performing panel.
POWER OPTIMISERSPower optimisers are attached to
each panel where the electrical production is maximised and then
sent onto a centralised string inverter. Power optimisers ensure that the energy output of each individual
panel is utilised.
MONITOR YOUR PERFORMANCE
With DualSun, you can monitor your energy production levels as well as the performance and health of your system from an easy to access online interface.
Generate reports, share your data and track the performance of your investment over time.
MICRO INVERTERSMicro inverters are attached to each individual solar panel and convert the DC electricity
to AC electricity at the source of electrical generation, allowing
each panel to perform to maximum capacity.
Data based on 5kW system on an average size (32m2) swimming pool heated to 28°C for 6 months in Melbourne, Australia with the use of a pool cover 12hrs/day and an electrical cost of 35.4c/kWh as per Origin Energy January 2018. Pool heating expense is based on the alternative use of an inverter heat pump with a COP of 10. Data assumes all generated electricity is used in the home.
CLEAN ENERGY COUNCIL (CEC) APPROVED PV MODULE PV60129019 CERTIFIED IEC 61215 & 61730 AND SOLAR KEYMARK
DualSun panels are AS/NZS 5033-compliant for use in the design and installation of solar photovoltaic (PV) systems, as per CEC requirements, and are eligible for small-scale technology certificates (STCs). Heatseeker DualSun panels must be installed by CEC-accredited installers.
The panel underwent rigorous testing at the TÜV Rheinland laboratory in Germany proving its resistance to extreme temperatures, accelerated aging cycles, and violent projections.
The DualSun panel passed IEC and Solar Keymark certifications and is the first panel in the world to obtain the new PV/T Solar Certification.
GENERAL DATALength 1677 mm
Width 990 mm
Frame width 45 mm
Weight empty / filled 25 kg / 30 kg
Frame colour / backsheet Black / Black
Hail rating Rated to AS 2712-2007
ELECTRICAL DATANumber of cells per module 60
Cell type (dimensions) Monocrystalline (156mm x 156mm)
Nominal power (Pmpp) 280 Wp
Module efficiency 17.2 %
Power tolerance 0 / +3 %
Rated voltage (Vmpp) 31.95 V
Rated current (Impp) 8.77 A
Open circuit voltage (Voc) 38.88 V
Short circuit current (Isc) 9.30 A
Maximum system voltage 1000 V DC
Reverse current load 15 A
NOCT 49 °C
Connectors Genuine MC4
Application class Class A
Voltage (µVoc) -0.345 %/°C
Current (µlsc) -0.047 %/°C
Efficiency loss -0.467 %/°C
THERMAL DATAGross area 1.654 m2
Volume of heat transfer liquid 5 L
Maximum temperature 80 °C
Maximum operating pressure 1.2 bar
Pressure loss per panel 4000 Pa at 200 litres / hour
Hydraulic input / output 15 mm fitting
Optical efficiency a0 55.9 %*
Heat loss coefficient a1 15.8 W / K / m2*
Heat loss coefficient a2 0W / (m2.K2)*
*The a0 a1 and a2 coefficients are the measured values from testing during EN 12945 certification at the TÜV Rheinland for unglazed collectors : n0 = 0.570 ; c1 = 11.02; c2 = 0; c3 = 4.802; c4 = 0.62; c6 = 0.011; Kd = 1 with a wind speed of 1m/s.
Head Office 2/19 Enterprise Drive Bundoora VIC 3083 P: (03) 9460 [email protected] supremeheating.com.au
NSW Office 19/24 Anzac Avenue Smeaton Grange NSW 2567 P: (02) 4648 [email protected] [email protected]
QLD Office Unit 13, 53-57 Link Drive Yatala QLD 4207 P: (07) 3807 [email protected]
SA Office Unit 4, 7-9 Streiff Road Wingfield, SA 5013 M: 0437 947 [email protected]
WA Office South Fremantle WA 6162 P: (08) 9433 [email protected] supremeheatingwa.com.au
PV P
ERFORMANCE
WARRAN T Y
PRODUCT
WARRAN T Y