+ All Categories
Home > Documents > THERM-O -EGG - GQF MFG instructions.pdf · THERM-O -EGG G.Q.F. MANUFACTURING COMPANY Phone...

THERM-O -EGG - GQF MFG instructions.pdf · THERM-O -EGG G.Q.F. MANUFACTURING COMPANY Phone...

Date post: 27-Jun-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
1
THERM-O -EGG G.Q.F. MANUFACTURING COMPANY Phone 912-236-0651 P.O. Box 1552 - Savannah, GA 31402 www.GQFMFG.com MAX / MIN - This function will give you the high and low temperature over a period of time. Reset by holding the MAX/ MIN button for three seconds. Press the button to scroll from MAX, MIN, to the current temperature. IN / OUT – “IN” temperature is the THERM-O-EGG unit which reads the ambient/room temperature. The “OUT” temperature is the EGG sensor which can be placed inside the incubator with your eggs. ALARM – The alarm can be set to sound for high and low temperatures. To set the high and low alarm hold the Alarm button for three seconds until the screen begins to blink. Use the black (C / F) button on the back of the unit to first set the HIGH temp. and then the LOW temp. The Alarm can only be set for the “OUT” temperature which is the EGG inside the incubator. MAGNETS These two magnets allow the unit to attach to a metal surface. BATTERY COMPARTMENT Holds one AAA battery. C/F BUTTON This button switches the unit from Centigrade to Fahrenheit. Also use this button when setting the Alarm tempera- ture settings.
Transcript
Page 1: THERM-O -EGG - GQF MFG instructions.pdf · THERM-O -EGG G.Q.F. MANUFACTURING COMPANY Phone 912-236-0651 P.O. Box 1552 - Savannah, GA 31402 MAX / MIN - This function will give you

THERM-O -EGG

G.Q.F. MANUFACTURING COMPANYPhone 912-236-0651 P.O. Box 1552 - Savannah, GA 31402 www.GQFMFG.com

MAX / MIN - This function will give you the high and low temperature over a period of time.

Reset by holding the MAX/MIN button for three seconds.

Press the button to scroll from MAX, MIN, to the current temperature.

IN / OUT – “IN” temperature is the THERM-O-EGG unit which reads the ambient/room temperature.

The “OUT” temperature is the EGG sensor which can be placed inside the incubator with your eggs.

ALARM – The alarm can be set to sound for high and low temperatures.

To set the high and low alarm hold the Alarm button for three seconds until the screen begins to blink. Use the black (C / F) button on the back of the unit to first set the HIGH temp. and then the LOW temp.

The Alarm can only be set for the “OUT” temperature which is the EGG inside the incubator.

MAGNETS

These two magnets allow the unit to attach to a metal surface.

BATTERY COMPARTMENT

Holds one AAA battery.

C/F BUTTON

This button switches the unit from Centigrade to Fahrenheit.

Also use this button when setting the Alarm tempera-ture settings.

Recommended