Optimization for Transient Thermo-Mechanics for High-Precision Structures
Thermal Modes for the Optimisationof Transient Thermo-MechanicsJohann Dugge MSc Presentation 09 November 2012Prof.dr.ir. A. van Keulen (TU Delft)Ir. M. Koevoets (ASML)Ir. E.C. Hooijkamp (TU Delft)Dr.ir. R. Delfos (TU Delft)
+=http://www.asml.com/imglib/structure/asml_logo.png#Challenge the futurePresentation OutlineMotivationResearch QuestionCooling OptimisationConclusion
#Challenge the futureNano-Scale Features in Electronics
20 nm
Images: ASML, etech.com, Intel, Wikipedia#Challenge the futurehttp://www.intel.com/pressroom/archive/releases/2006/20060125comp.htmhttp://www.asml.com/asml/show.do?lang=EN&ctx=44169http://blog.etech.com/2010/08/17/nokia-c6-phone-disassembly/http://en.wikipedia.org/wiki/Integrated_circuit3
Positioning (ideal)
#Challenge the future
Positioning (with deformation)
#Challenge the future
Transient Thermal Stresses
#Challenge the future
Transient Thermal Stresses
#Challenge the futureCooling
Uniform
#Challenge the future
OptimisedCooling
#Challenge the future
YesNoOptimisation ProcessSTART
Sufficient?ENDTestPropose
Smart way to propose new designs?#Challenge the futureResearch QuestionHow can thermal modes be used to optimise coolingin a transient thermo-mechanical system?#Challenge the future
Thermal Modes
Temperature FieldDeformation#Challenge the future
Thermal ModesTemperature FieldDeformation
#Challenge the futureThermal Modes
+
#Challenge the futureThermal Modes
+
#Challenge the futureModal Reduction
#Challenge the future
Modal Significance MeasuresExcitation=
++#Challenge the future
Modal Significance MeasuresObservability (in the objective)
O=0.01O=-5#Challenge the futureModal Significance MeasuresTime-objective Relevancetime0.5 s
r=0.001r=50
#Challenge the futureModal Significance MeasureTotal Significance
Excitation
Observability
Time-objective Relevance#Challenge the futureModal Reduction usingModal Significance Measures
#Challenge the futureOptimised Cooling
#Challenge the future
Optimised Cooling
#Challenge the futureOptimisation Convergence
#Challenge the futureOptimised Cooling
#Challenge the futureOptimisation Convergence
#Challenge the futureHow can thermal modes be used to optimise coolingin a transient thermo-mechanical system?ConclusionModal reduction technique.Potentially low-cost sensitivity indicators. Investigate heuristics.Use in modal sensitivity analysis.Reduced set of design variables.
#Challenge the futureNext StepsSensitivity indicators(systematic experiments, analytical solution)Use in eigensensitivity analysisModal reductionEstimate error from objective significance measures?
#Challenge the futureThank You!http://www.asml.com/imglib/structure/asml_logo.png#Challenge the future