Click here to load reader
Click here to load reader
How do You Cut VOC and HAP Emissions,Hazwaste and Total Operating Costs
By Up to 40%•• • Without Spending a Dime?
You'll Learn:• Constituents of coatings, and how they
affect air pollution and waste generation
• Compliance coatings available in solvent-borne,water-borne and powder formulations
• The role of chromates and other inorganic HAPs
• RACT, BACT, MACT, LAER and NEHSAP regs
• 20 calculations used to determine complianceor permit conditions
• Essentials of recordkeeping, audits, violations
About the InstructorRon Joseph, MS, is presidentof acoating and environmentalconsulting firm established in1984. He has delivered trainingto improve performance,process efficiency and P2 tomore than 30 Air Force Bass,Marine Corp. operations andcorporations.
• 20+ years experienceevaluating military coatings
• 16 years as a coatingsconsultant to industry
• Coatings Editor ofMetal Finishing Magazine
• Author of the OrganicGuidebook & Directory
tity of air demanded by the treatment system, XpandAir FlowController maintains consistentair pressure for decreased energyusage and reduced leaks. The controller regulates the rate of airflow from the supply side to allowonly the quantity of air needed bythe demand side of the compressed air system.Circle 415 on the reader service card
SOLVENT EMULSION CLEANERSWest Penetone Inc., Tenafly, N.J.
Penetone ET is a revolutionarysolvent emulsion cleaner based onthe company's Ester Technology(ET). The cleaning formulation,based on methyl esters derivedfrom natural and renewable resources, has no flash point and isnoncombustible, so it can be usedin most heated conditions. It doesnot contain petroleum- or terpene-based solvents. With a nearneutral pH level of 9.0-9.3,worker safety is enhanced. Penetone ET is noncorrosive and safeon most metals, has a very mildand nonoffensive odor, and contains no SARA Title III Section313 reportables. The new "green"formula is designed to clean alltypes of industrial soils.Circle 416 on the reader service card
Circle 084 on reader information card
THERMOPLASnC VALVES.ACTUATORS. AND PRESSUREGAUGESPlas/o-D-Matic Values Inc.. CedarGroue, N.J.
With the introduction of SeriesABRA in all polypropylene housing and moving parts, Plast-OMatic now offers a complete lineof actuated and fail-safe valvessuitable for the harsh environments typically found in electronics manufacturing, electroplating,and other applications that relyon acids. Pressure and vacuumgauges are also notoriously susceptible to corrosion. For theseapplications, the company has introduced a special gauge guard
safety valve, 1/4-in. NPS (Ml air,and %-in. NPS (Ml fluid connections.Circle 414 on the reader service card
FLOW CONTROLLERZeks Compressed Air Solutions, WestChester. Pa.
The XpandAir Flow Controllercan improve the efficiency of acompressed air system by up to601fr. By supplying only the quan-
Join us for this Important 4-day dass:January 16-19,2001 San JOMI, CA
..........,.. -"'''IIIIIU
use cleaning cups/tanks designedto speed up the equipment cleaning process, save solvent, reduceVOC emissions, and save finishing operators time. Solvent Savers use compressed air to push ablast of air and solvent throughfluid passages of spray guns,hoses, etc. to clean them. Metering permits variations in the air/solvent mix. Solvent Saver isequipped with a metering valve,
84 Metal Finishing
Circle 063 on reader information card
www.samsco.com
PARTS WASHERHydro-Blast Inc., Vancouver, Colo.
Hydro-Blast has redesigned theModel 80 parts washer, which features a 28-in. turntable and 40-in.load height. A new door designexposes more of the turntable foreasy loading and unloading. Thepopular top-driven turntable, 0 0
spray jets, and built-in wastewa-
18 Cote Avenue, Goffstown. NH 03045 USAPhone: (603) 668-7111 FAX: (603) 647-0537
Email: [email protected]
Call Samsco today and find out the complete
story on how the WasteSaver can make your
wastewater problems evaporate.
Return your process streams to their primaryuses with the SamscoWasteSaver"" Vacuum
Evaporator for closed loop applications.
Nobody can match Samsco's evaporator design
proficiency, manufacturing quality, regulatory
acumen and adaptability to the complete
spectrum of applications. And now, Samsco
adds the new WasteSaver to its wastewater
management arsenal.
The WasteSaver features pumpless design,PLC operation, no air discharge, flows to
3,000 GPH and exceptionally low operating
costs-just for starters.
corrosion from cooling water,stainless steel cooling wells,quick-release target clamps forfast target changes, no threadedinserts, multiple-mounting styles,optional high-strength and unbalanced arrays, up to 50% targetutilization, and power densities>500 W/in.'2Circle 419 on the reader service card
The Barnant Model HD-PHIP isan automated, self-proportioningpump/pH controller designed tostart at maximum flow, graduallydecreasing flow as the pH valuenears the set point. It provides afully automated, flow control feature not found on other types ofpH pumps and controllers. Pumping flow rate is proportional to thedeviation from the pH set point.The farther from the set point, thegreater the pumping frequency.The HD-PHIP pump/pH controller allows greater fine-tune control for critical applications suchas water treatment and chemical,oil, and gas processing. Theseunits include a temperature compensation trimmer, a liquid levelcontrol input, and a utility inputconnector specifically for analarm. Flow ranges are between 1liter per hour and 18 liters perhour. Maximum pressure is 145psi.Circle 418 on the reader service card
with a clear shield. The guard isolates the gauge from process corrosion and the air-tight shieldeliminates atmospheric corrosionwhile permitting full view of thegauge.Circle 417 on the reader service card
SPUTTERING CATHODESKurt J. Lesker Co., Clairton, Pa.
Key features and benefits of KurtJ. Lesker's 7-in. round and 5-in.linear industrial cathodes includelinear lengths from 12 to 80 in.long, isolated magnets to prevent
MnERING PUMP/pH CONTROLLERBarnant Co., Barrington, III
November 2000 85