THIELE Hand Hoists

154

Protects the operator from injury

Prevents the hoist to be overloaded to a point when it becomes dangerous

Protects the hoist from damages

Provides additionally safety

Longer service life compared to non overload protected devices

Complies with DIN EN 13157, DGUV 54 und GPSG

Advantages of the Overload Protection:

label

THIELE Hand Hoists

The Namefor Safety.

The THIELE Lever Blocks and Chain Blocks are equipped with a Overload Protection.

155

With overload protection*

Lightweight robust steel construction

Super strength THIELE alloy load chain as per EN818-7, galvanized

Minimum headroom

Minimum effort to raise maximum load by easy handling

Hooks with strong cast steel safety latches

Lower hook easy turnable with roller bearing

Also approved for tensioning as per EN 12195 (only TM-Lever Block)

Fully enclosed gear train (TM-Chain Block only)

Protected automatic weston brake with unique twin pawls

galvanised handchain as standard (TM-chain block only)

Durable baked enamel paint protection

Spare parts available

TÜV / GS / CE approved

Supplied with THIELE test certificates

Manuals available in 5 languages

*Except TM-LB 250 kg.

Advantages for your Application:

TM Chain BlockCapacities 500 kg to 5 tonnes

TM Lever BlockCapacities 250 kg to 6 tonnes

THIELE Hand Hoists

TM Chain Block TWN 1000TM Lever Block TWN 1001

156

TM-B-OP 05N

TM-LB 025*

TM-B-OP 10N

TM-LB-OP 075N

TM-B-OP 20N

TM-LB-OP 150N

TM-B-OP 30N

TM-LB-OP 300N

0,5F063511F063512F063513F063514F063515

1236270127131363610

0,25 F061901F061902F061903F061904

12,54160230859225251,8

1,0F063611F063612 F063613 F063614 F063615

1306317158140424212

0,75F062411F062412F062413F062414

114628032513614842427

2,0F063711F063712 F063713 F063714 F063715

1358414187161464622

1,5F062511F062512F062513F062514

1228410380160172464611

3,0F063811F063812 F063813 F063814 F063815

2278465210161545432

3,0F062611F062612F062613F062614

13210410480180200545421

TM-B-OP 50N

TM-LB-OP 600N

5,0F063911F063912 F063913 F063914 F063915

24110636288190646446

6,0F062711F062712F062713F062714

23410410620235200626231

*Without overload protection.

TM Chain Block TWN 1000

TM Lever Block TWN 1001

Working Load LimitLift app. 3,05 mLift app. 4,6 mLift app. 6,10 mLift app. 9,10 mLift app. 12,20 mChain FallsEffort to lift for max. Working LoadLoadchain diameterHeadroom (A)Width (B)Depth (C)Hook opening (upper)Hook opening (lower)Net weight (for lift 3,05 m)

Working Load Limit (Lashing Capacity)Lift app. 1,50 mLift app. 3,05 mLift app. 4,60 mLift app. 6,10 mFalls of chainEffort to lift for max. Working LoadLoadchain diameterLength of lever handle (D)Headroom (A)Width (B)Depth (C)Hook opening (upper)Hook opening (lower)Net weight

The Namefor Safety.

THIELE Hand Hoists

[t max.][Article-No.][Article-No.][Article-No.][Article-No.][pieces][kgs][mm][mm][mm][mm][mm][mm][mm][kgs]

[t max.][Article-No.][Article-No.][Article-No.][Article-No.][Article-No.][pieces][kgs][mm][mm][mm][mm][mm][mm][kgs]

Unit

Unit

157

Chain Schema

Postition of Chain End

1. vertical load chain end; welding-zone of all verticalchain links face outwards

Position of Chain and Guide Roller No. 1guide roller No. 1Load chain below guide roller No. 1.

Control

Right side view:Hook / Bottom block in front

Postion of Chain and Guide Roller No. 2guide roller No. 2Load chain below guide roller No. 2!Load chain below of anchorage; will befixed at anchorage later

Load Chain Mounting TM Chain Block TWN 1000

1. The mounting of the load chain is described in direction from hook toanchorage.

2. Pay attention not to twist the load chain.

3. The load chain will be carried by the sprocket in case of operation ofthe hand chain. It will be guided by the guide rollers.

4. Load chain ends should be fixed with bolts and split pins.

5. The load chain should be lubricated for the first use.

THIELE Hand Hoists

Left side view:Anchorage in front

Course of Action

158

4.4.

5.5.

1.

2.

3.

Chain SchemaTM-LB-OP 600N

Chain SchemaTM-LB 025 TM-LB-OP 075NTM-LB-OP 150NTM-LB-OP 300N

Course of Action

1. Switch direction-lever to „N“-position for load chain mounting.

2. Insert the load chain end to the sprocket, so that the welding zones of the

vertical chain links face outwards.

3. Further move the load chain by turning the hand wheel.

4. TM-LB 025, TM-LB-OP 075N to TM-LB-OP 300N:

Fix load chain end to hook.

TM-LB-OP 600N:

Move load chain through bottom block and fix chain end to the top hook.

Pay attention not to twist the chain. If necessary, shorten the chain by one link.

5. Fix lose load chain end by bolt and split pin to the chain ring

(TM-LB 025: only spring ring).

6. The load chain should be lubricated for the first use.

Load Chain Mounting TM-Lever Block TWN 1001

The Namefor Safety.

THIELE Hand Hoists

159

Z08133Z08134Z08135Z08136

1,002,003,005,00

278 182 217 90278 182 217 90356 220 277 145356 220 277 145

75-23075-23080-32090-320

4,55,09,511,0

21

TWN 0899

1 235

F918186 640 1700 490

T

B

H

TM Girder Clamp

TM Display

THIELE Hand Hoists

Article-No. Working Load Limit[t max.]

Adjustablebeam width [mm]

Weightapp.[kgs]

Trade Size

Article-No.

Dimensions [mm]

A B E F

Dimensions [mm]

B H T

Weightapp.[kgs]

Modular

plug-in unit

160

TM-B-OP 05NTM-B-OP 10NTM-B-OP 20NTM-B-OP 30NTM-B-OP 50N

TM-B-OP 05NTM-B-OP 10NTM-B-OP 20NTM-B-OP 30NTM-B-OP 50N

TM-B-OP 05NTM-B-OP 10NTM-B-OP 20NTM-B-OP 30NTM-B-OP 50N

TM-B-OP 05NTM-B-OP 10NTM-B-OP 20NTM-B-OP 30NTM-B-OP 50N

TM-B-OP 05NTM-B-OP 10NTM-B-OP 20NTM-B-OP 30NTM-B-OP 50N

0,340,520,811,9011,50

0,020,030,040,050,10

0,51,02,03,05,0

0,010,020,030,030,03

0,060,090,150,150,19

0,350,580,852,0313,90

0,501,002,003,005,00

TWN 1010

TWN 1011

TWN 1013

TWN 1015

TWN 1017

Z06928Z06929Z06930Z06931Z06932

Z06934Z06935Z06936Z06937Z06938

Z09944Z09945Z09946Z09947Z09948

Z09939Z09940Z09941Z09942Z09943

Z09949Z09950Z09951Z09952Z09953

THIELE Hand Hoists

Spare Parts TM Series for Chain Blocks TWN 1000

The Namefor Safety.

for TM-Chain BlockType

for TM-Chain BlockType

for TM-Chain BlockType

for TM-Chain BlockType

for TM-Chain BlockType

Weightapp.[kgs]

Weightapp.[kgs]

Working LoadLimit[t max.]

Weightapp.[kgs]

Weightapp.[kgs]

Weightapp.[kgs]

Working LoadLimit[t max.]

Article-No.

Article-No.

Article-No.

Article-No.

Article-No.

Ratchet Disc Part-No. 17 (previously Part-No. 27)

Friction Plate Part-No. 16(previously Part-No. 28)

Safety Clip Part-No. 7N (previously Part-No. 8N)

Hitches acc. to DIN 74054 Part 1 and Part 2

Bottom Hook Assy Part-No. 8N(previously Part-No. 7N)

161

TM-LB-OP 075NTM-LB-OP 150N

TM-LB-OP 300N/600N

TM-LB-OP 075NTM-LB-OP 150NTM-LB-OP 300NTM-LB-OP 600N

TM-LB-OP 075NTM-LB-OP 150NTM-LB-OP 300NTM-LB-OP 600N

TM-LB-OP 075NTM-LB-OP 150NTM-LB-OP 300NTM-LB-OP 600N

0,490,882,204,50

0,130,200,25

0,751,503,006,00

0,500,952,506,70

0,030,040,050,06

0,501,503,006,00

TWN 1012

TWN 1014

TWN 1016

TWN 1018

Z09455Z09454Z09456

Z09976Z09977Z09978Z09979

Z09968Z09969Z09970Z09971

Z09972Z09973Z09974Z09975

THIELE Hand Hoists

Spare Parts TM Series for Lever Blocks TWN 1001

for TM-Lever BlockType

for TM-Lever BlockType

for TM-Lever BlockType

for TM-Lever BlockType

Weightapp.[kgs]

Working LoadLimit[t max.]

Weightapp.[kgs]

Weightapp.[kgs]

Weightapp.[kgs]

Working LoadLimit[t max.]

Article-No.

Article-No.

Article-No.

Article-No.

Ratchet Disc Assy. Part 21N (previously Part-No. T17 and T18)

Safety Clip Part-No. 9N (previously Part-No. 61N)

Top Hook Assy Part-No. 8N (previously Part-No. 31N)

Bottom Hook Assy Part-No. 10N (previously Part-No. 33N)