3
Now prep metal for paint faster and more consistently – with the comfort and control of Scotch-Brite™ abrasives!
Think
NEW!
Fast
Random Orbital (RO) Discs
Distributed by:
New Scotch-Brite™ Random Orbital (RO) Discs are engineered to give you a faster-cutting, longer lasting and more consistent alternative to paper and cloth-back coated abrasives on applications like prepping bare metal for painting.
These innovative discs are constructed especially for random orbital sanders, using a non-woven nylon web embedded with premium ceramic grain. The result is a longer-lasting disc that offers a quicker initial cut than most coated abrasives designed for random orbital sanders – plus a more consistent finish from beginning to end.
Built to out-last, out-perform conventional coated abrasive paper & cloth discs
A faster, more efficient way
• Faster cut rate
• Extremely long life – fewerdisc changeovers
• More consistent resultsthroughout the life of the disc
• Requires less pressure to cut
• Less loading and glazing
Optimize your process – with the new 3M™ Elite SeriesRandom Orbital SanderThe ideal workmates for Scotch-Brite RO Discs! Built to provide years of dependable performance and operator comfort, these professional-grade, air-powered sanders will help you get optimal results from Scotch-Brite RO discs.
Scotch-Brite™ Random Orbital (RO) DiscsNEW!
to prep bare metal surfaces
A faster, more efficient way
3M.com/abrasives
1
9.0
Pape
r
4.5
1
Film
Scotch
-Brite
RO
Scotch
-Brite
RO
Scotch
-Brite
RO
Scotch
-Brite
RO
2.11
Lightw
eight
Cloth
1.71
Heavy
weight
Cloth
1
1.5
.5
2.5
2
Pain
t Thi
ckne
ss (m
ils)
Scotch-Brite RO Disc GradeCRS MED FINE
Scotch-Brite™ RO Discs Last Longer!
Grade/Finish Equivalents Using Random Orbital Sanders
Recommended Starting Points for Paint Prep
Coated Abrasive–Paper Discs Scotch-Brite RO DiscsGrit Ra μ-in Grade Ra μ-in120 30–40 RO-FIN 30–40100 40–50 RO-MED 40–5080 50–60 RO-CRS 60–70
Average Scotch-Brite RO Disc Life vs. Coated Abrasives
Averages up to 2× the life of cloth!
Averages up to 9× the life of paper!
TIP: Not sure what your paint system can cover? Try starting with RO-CRS on a scrap piece, then send it through the paint line. If that doesn’t cover the scratches, move to a finer grade.
These are recommended starting points for preparing bare metal for the application of various thicknesses of paint. Your own results may vary depending on the specific processes and materials used.
Please recycle. Printed in USA. © 3M 2012. All rights reserved. Issued: 7/12 8746HB 61-5002-8319-9
Abrasive Systems Division3M Center, Building 223-6S-03St. Paul, MN 55144-10001-866-279-1235www.3M.com/abrasives
3M, Scotch-Brite and Hookit are trademarks of 3M Company. Used under license by 3M subsidiaries and affiliates
3
Warranty, Limited Remedy, and Disclaimer: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Back Up Pads
UPC 051141- Size Thread Description
20352-2 5" x 3/8" 5/16-24 EXT 3M™ Hookit™ Low Profile Disc Pad
20355-3 6" x 3/8" 5/16-24 EXT 3M™ Hookit™ Low Profile Disc Pad
Scotch-Brite™ RO Discs
UPC 048011- Size Grade Color Discs per Carton
64694-7 5" x NH FINE green 100
64693-0 5" x NH MED maroon 100
64756-2 5" x NH CRS brown 100
64695-4 6" x NH FINE green 100
64696-1 6" x NH MED maroon 100
64757-9 6" x NH CRS brown 100
3M™ Elite Series Random Orbital Sanders – Non-Vacuum
UPC 051141- Diameter Orbit Recommended Use
28498-9 5" 3/32" Small orbit helps reduce disc wear, especially on edges. Produces a finer finish.28501-6 6" 3/32"
28497-2 5" 3/16" General purpose. Use on flats, edges and contours.28500-9 6" 3/16"
28495-8 5" 5/16" Increases cut. Works well on flat parts.28499-6 6" 5/16"
Ordering Information
For most applications, 3M recommends starting with a sander with a 3/16" orbit.
Scotch-Brite™ Random Orbital (RO) DiscsNEW!