This document outlines the new features available in the release of Leapfrog Geo 4.3.

System requirements and upgrade notes can be found at the end of this document.

For Leapfrog Geo support visit my.leapfrog3d.com.

© Seequent Limited 2018 2

CONTENTS

New features in Leapfrog geo 4.3 ............................................................................................................. 3

Variable drillhole radius scaling ......................................................................................................... 3

Planned drillhole groups .................................................................................................................... 3

Display drillhole trace object .............................................................................................................. 4

Reload meshes ................................................................................................................................. 4

AcQuire Smart refresh ....................................................................................................................... 4

Mesh clean up improvements ............................................................................................................ 4

Structural data analysis ..................................................................................................................... 4

Table of statistics for numeric data .................................................................................................... 5

Graphs and statistics refresh ............................................................................................................. 5

Weighted statistics for numeric columns ............................................................................................ 8

Cross section improvements ............................................................................................................. 8

Improved Datamine export ................................................................................................................ 9

DWG file export ................................................................................................................................. 9

Sharing to View ............................................................................................................................... 10

Central publishing improvements..................................................................................................... 11

Cancel scene export ........................................................................................................................ 11

Copy evaluations ............................................................................................................................. 11

Hyperlinks in comments and notes .................................................................................................. 11

Single sign in to View and My Leapfrog ........................................................................................... 11

Installation path ............................................................................................................................... 11

Upgrade Notes ....................................................................................................................................... 12

Project upgrades ............................................................................................................................. 12

Hasp driver update .......................................................................................................................... 12

System Requirements ............................................................................................................................ 13

© Seequent Limited 2018 3

NEW FEATURES IN LEAPFROG GEO 4.3

Variable drillhole radius scaling

When visualising downhole numerical data, you can now scale the width of the drillhole cylinder

by another column of data values from the same table.

Planned drillhole groups

Planned drillholes are now managed in groups for greater efficiency. For example, carry out

evaluations, define filters and display drilling prognosis at a group level. Planned drillholes can also now

be viewed by evaluation. Your existing planned holes will automatically upgrade into this new grouping

based upon the prefix.

See planning drillholes for more information.

© Seequent Limited 2018 4

Display drillhole trace object

There is a new Drillhole traces object in the Drillholes folder that allows for independent display of

drillhole traces in the scene. Trace display properties can be changed in the properties panel.

Reload meshes

New meshes imported into Leapfrog Geo or created from

extracting mesh parts are now dynamic objects that can be

reloaded. To reload a mesh, right-click on the mesh and select

Reload Mesh. Changes to the mesh will flow down the project

tree. Please note this excludes elevation grids.

AcQuire Smart refresh

Leapfrog Geo 4.3 introduces the acQuireDirect API functionality -

Smart Refresh. Smart Refresh obtains the latest drilling data from

the GIM Suite database without having to reload the entire

contents of the database. This will greatly reduce the amount of

data transferred and speeds up data updates. Smart Refresh will

only include drillholes relating to data that has been changed

since the database was last updated in Leapfrog Geo.

See connecting to an acQuire database for more information.

Mesh clean up improvements

Imported volumes and meshes may have overlapping triangles

(known as self-intersections) that prevent the mesh from being

usable in further mesh operations. An option has been added to

remove self-intersections from newly imported meshes.

See cleaning up a mesh for more information.

Structural data analysis

View statistics on structural data or lineations in the project tree.

The statistics displayed for stereonets has previously been limited

to Fisher statistics, which are calculated for polar data. Bingham

statistics, which are more useful for folded geologies, are now

© Seequent Limited 2018 5

available. Clicking the Plot, Bingham, and Fisher buttons switches between the display of the stereonet

and the statistics tables.

See stereonets and viewing statistics on structural data for more information.

Table of statistics for numeric data

A new function has been added to Statistics that tabulates the basic statistics for numeric data.

Customise the table by hiding columns or displaying multiple categories.

Graphs and statistics refresh

Several changes have been made to how graphs and statistics are displayed to provide a more

consistent experience.

See Statistics for more information.

Scatter plots

• The Linear Regression line is now weighted by Interval Length for Drillholes and by Block Volume for Block Models.

• A lasso tool allows for improved freeform point selection on the graph.

• Selecting points in the scatter plot creates a temporary filter applied to the scene view. Switch the filter on and off to analyse in 3D how the selection relates to the rest of the data. This also applies to univariate graphs.

• Export the graph image as a .pdf or .svg or .png

• If your X and Y values are on different scales, it can be useful to display the quartile line and compare this to the X=Y line.

© Seequent Limited 2018 6

Some lesser used functionality has been removed to improve the overall user experience. This includes

zoom and pan controls, the ability to select point size and filter based on category column, set the flat

point colour and the colour of the regression and conditional expectation lines. If you have feedback on

this, please contact support@leapfrog3d.com.

Box plots

• A small improvement makes it easier to see what categories are available in the box plot and if they are turned on or off.

Some lesser used functionality has been removed to improve the overall user experience. This includes the option for vertical boxes, and notches. The summary table has been replaced with the new Table of Statistics. If you have feedback on this, please contact support@leapfrog3d.com.

© Seequent Limited 2018 7

Composite comparison

• Click and drag on the before and after compositing graph to filter data. The selection will be

reflected in the scene.

QQ plot

• Filter your column by category or query filter.

All graphs

• Choose the image quality when copying graphs.

• Set the limits for both the X and Y scales for all relevant graphs.

• The Histogram has been moved from the properties panel and can be accessed for many numeric objects by right clicking on the column in the tree. For example, view a histogram and statistics on structural data.

© Seequent Limited 2018 8

Weighted statistics for numeric columns

Both weighted and unweighted values are now displayed in the Properties Dialogs for numeric columns

on interval tables. You can also view weighted and unweighted values in the Table of Statistics.

Cross section improvements

Line evaluations

• Evaluate lines on to cross sections such as GIS lines and polylines. Assign symbols to the pierce point where the line intersects the cross section, to provide context when presenting geological cross sections.

• Additional point symbols have been added.

See adding and styling lines for more information.

© Seequent Limited 2018 9

Hatching on drillholes

When laying out cross sections it is now possible to display hatching on drillholes.

See adding and styling drillholes and planned drillholes for more information.

Arrange labels on cross sections

Where multiple drillholes are evaluated in a confined space, cross section layouts can become hard to

read or even overlap. With Leapfrog Geo 4.3 it is easy to arrange the collar labels into a custom

composition by simply dragging the collar labels to the desired location.

See adding and styling drillholes and planned drillholes for more information.

Improved Datamine export

The advanced block model export introduced in Leapfrog Geo 4.3 has been added to sub-blocked

models exported in Datamine format.

DWG file export

.dwg is available as an export format for:

• Sections

• Serial sections

• Alignment serial sections

• Points

• Numeric model values

© Seequent Limited 2018 10

• Polylines

• Meshes

DWG will export in the same hierarchical format used for DXF export.

Sharing to View

View is a web-based visualisation tool that is approachable for all

users, giving you the confidence to share your data with extended

stakeholders and collaborators. With the click of a button in

Leapfrog Geo, upload customised views of your model in a form

that easily communicates what is important, stripping away any

unnecessary complexity.

Leave collaborators notes or draw annotations on specific areas

to direct focus to an area of interest within your data.

When you upload a scene to View, a dialogue box will open with

a warning if the objects selected are too large to upload. Speed is

critical for displaying web-based data and why we have upload

limit sizes, learn what they are.

For more information on View and a demo, visit www.lfview.com.

© Seequent Limited 2018 11

Central publishing improvements

It is now possible to publish more types of data to Central,

for viewing in Browser including:

• Planned drillholes

• Downhole points

• GIS data

• Images

• Textures

• Cross sections and polylines

Cancel scene export

Exporting large scenes can sometimes take longer than anticipated. Cancel a scene export at any time.

Copy evaluations

Regardless of what object you wish to copy, you can now be sure the evaluation will also be copied to

the duplicate object.

Hyperlinks in comments and notes

Comments and notes in Leapfrog Geo projects support hyperlinks. Link to websites or file locations on

your computer.

Single sign in to View and My Leapfrog

There is a new menu in the upper right-hand corner of the Leapfrog Geo window

that lets you sign in to My Leapfrog and View.

Installation path

The default installation path for Leapfrog products is C:\Program Files\Seequent.

© Seequent Limited 2018 12

UPGRADE NOTES

Project upgrades

Leapfrog Geo 4.3 is backwards compatible and supports direct project upgrades from any version of

Leapfrog Geo since version 2.0. Projects built in earlier versions of the software must be opened using

Leapfrog Geo 2.0 prior to being opened with 4.3. Backdated versions of the software are available at

leapfrog3d.com.

Hasp driver update

Due to a problem between the Hasp dongle drivers and the recent Windows 10 update, you may have to

wait for the Hasp driver to update to the latest version. This means that your Leapfrog Geo 4.3 Install

will take longer than usual.

© Seequent Limited 2018 13

SYSTEM REQUIREMENTS

Supported Recommended

Operating System1,2 Windows 7 (64bit)

Windows 8 (64bit)

Windows 8.1 (64bit)

Windows 10 (64bit)

Windows 7 (64bit)

Windows 8.1 (64bit)

Windows 10(64bit)

Processor,

Intel CoreTM i3,i5 or i7 CPU

(2nd generation or later)

Intel XeonTM

Intel CoreTM i7-6800K

Intel CoreTM i7-6900K

Intel CoreTM i7-7700

Intel XeonTM E5-2630 v3

System Memory 4 GB (Minimum) 32 GB RAM

Free hard disk space Legacy spinning hard disk

250 GB capacity

25 GB free space

Solid state disk drive

1 TB Capacity

100 GB free space

Display resolution 1280 x 720 (Minimum)

Single display unit

1920 x 1080 (HD) or better

Multiple display setup

Graphics5 NvidiaTM (Desktop hardware)

GeForce 700 series3

GeForce 900 series3

GeForce 1000 series3

Quadro 600 series and above

Quadro K series3

Quadro P series3

GeForce GTX 950i4

GeForce GTX 1050Ti4

GeForce GTX 10504

NvidiaTM (Mobile hardware)

GeForce 700M series3

GeForce 800M series3

GeForce 900M series3

GeForce 1000 series3

Quadro M series3

Quadro P mobile series

GeForce GTX 950M4

GeForce GTX 1050M4

AMDTM / ATITM (Desktop hardware)

Radeon HD 8000 series3

Radeon R5 series3

Radeon R7 series3

Radeon R9 series3

Radeon RX series3

Firepro V series3

Firepro W series3

Radeon RX 4604

Radeon RX 5704

AMDTM / ATITM (Mobile hardware)

Radeon HD 8000 series3

Radeon R5 series3

Radeon R7 series3

Radeon R9 series3

Radeon RX series3

FirePro M series

Radeon R9 M3754

Radeon RX 4604

IntelTM Integrated Graphics

HD Graphics 20003 (Generation 2 or later)

HD Graphics 510 (Generation 6 or later)

Notes:

1 Running Leapfrog in virtualised environment is not supported 2 Running Leapfrog via a remote desktop connection or other remote login system is not supported 3 Opening Leapfrog projects over a network connection is not supported 4 Graphics processor must have at least 512 MB memory 5 Touch-screen hardware is not supported

LEAPFROG and SEEQUENT are registered trade marks or trade marks of Seequent Limited. All other product and company

names are trade marks or registered trade marks of their respective holders. Use of these trade marks does not imply any

ownership of these trade marks or any affiliation or endorsement by the holders of these trade marks.

© Seequent Limited 2018 14

COMPLEXITY TO CLARITY

Seequent is a global leader in the development of visual data science software and

collaborative technologies.

seequent.com | leapfrog3d.com | blockbustersuite.com

Download the latest version here

Contact us at support@leapfrog3d.com