Threaded Products | Gaskets & Seals | Precision Machining

FIRST CALL, ONLY CALL

Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group

is a manufacturer and distributor of threaded products, gaskets & seals, and precision machined components.

Dan-Loc Group manufactures and distributes products that serve the global oil & gas industry as well as the

petrochemical, industrial, marine, power generation, agriculture and transportation industries. Dan-Loc Group

has facilities in the USA, UK, Singapore and Malaysia to serve our customers.

Dan-Loc Group has 189 years of combined manufacturing experience with each company recognized as a premier

supplier of the highest quality industrial threaded products. Today, Dan-Loc Group produces thousands of

standard and special tap end studs, double end studs, continuous thread studs and nuts.

Dan-Loc Group also manufactures and supplies a full line of API and ASME ring joint gaskets. A large volume of

common sizes and materials is in stock as well as raw material grades to produce non-standard gaskets. Products

include standard and specialty ring joint gaskets, spiral wound gaskets, non-metallic gaskets and specialty seals.

With an extensive inventory of raw materials and full-line machine shop capabilities, Dan-Loc Group is fully

capable and ready to produce any standard or special product requirements. We are equipped for heat treating

to ASTM requirements and can provide a variety of platings and coatings to meet industry standard or customer

design specifications.

Dan-Loc Group has the manufacturing capacity, facilities, quality control, personnel, and experience to meet

the needs of our customers and the industries they serve. Dan-Loc Group can meet our customers’ needs for

high quantity, long-run jobs as well as small lot, expedited, or rush orders. All Dan-Loc Group companies are

ISO 9001:2008 Registered.

• Global supply chain

• Single source for stud bolts

& ring gaskets

• Domestic manufacturing

& world class sourcing

• Complete traceability

• Friendly 40-lb packaging

• Listed on most end-user AMLs

• ISO 9001:2008 Registered

• API Spec Q1 Certified

• API 6A and 20E Monograms

• Six Sigma Green Belt Team

• In-house heat treatment

• In-house testing capabilities

• Convenient express locations

• In-depth industry knowledge

DAN-LOC EXPRESS FILLS YOUR

ORDERS FOR HARD-TO-FIND

SPECIALS AND STANDARDS. FAST.

If you need stud bolts quickly, you should know about

Dan-Loc Express. At our locations across the USA and

the UK we’re ready to fulfill your bolt orders quickly,

so you can get what you want when you need it.

At each location, we have a full range of widely used

fasteners ready for immediate shipment. We can also provide

studs made from exotic alloys – plus other unique products.

We offer fast turnaround on special orders, including

special length studs and custom configurations.

Our dedicated staff of fastener experts will make

sure your needs are quickly met from our

wide selection of material options

including: B7, B7M, L7, L7M,

B16, B8, B8M and exotic alloys.

We also offer a variety of platings

including zinc and cadmium, as

well as PTFE and Cermet coatings.

Call the Dan-Loc Express

nearest you for quick availability

of a wide range of bolts and gaskets.

Spiral Wound GasketsWith and without stainless steelinner rings

Fast service on custom sizes

THREADED PRODUCTS

Dan-Loc Group is an ISO 9001:2008 Registered manufacturer of allthread studs, tap end studs, and custom fasteners. Dan-Loc Group’scapabilities include cut threading, roll threading, and the use of barfeed lathes that can produce special reliefs, profiles and single pointthreads on parts up to six inches in diameter.

Dan-Loc Group is licensed to use the API Spec 20EMonogram BSL-1,BSL-2 and BSL-3 (License No. 20E-0022) for all sizes of roll threadedstuds and all sizes of fully machined bolts, screws and nuts.

Dan-Loc Group is a leading provider of API ring gaskets, spiralwound gaskets, non-metallic gaskets and precision machinedgaskets. Dan-Loc Group has large inventories of standard gasketson the shelf. Same day shipment available.

Dan-Loc Group is licensed to use the API Spec 6A Monogram(License No. 6A-1867) on all sizes and materials of manufacturedring joint gaskets

Specialty GasketsMachine shop dedicated to manufacturing special gaskets

Made to customer prints

All materials including inconel,titanium, and other exotics

StudsTap end Studs

Double end Studs

Combination Studs

Single end Studs

All Thread Studs

Anchor Bolts / Bonnet Bolts

Collars / Specials

NutsHex Nuts / Square Nuts

Slotted Nuts

Coupling Nuts / Jam Nuts

Cap Nuts / Specials

Spherical Nuts

High Profile or “Tall” Nuts

HeadedPartsHex Head

Socket Head Cap Screws

12-Point Cap Screws

Set Screws / Specials

MaterialsStocked bar in B7, L7, B16, andall stainless grades, 17-4, A286,and exotics such as inconel, monel,and hastelloy to make any typeof special threaded products

FinishingCoatingsWe are capable of supplying manytypes of coatings per your specifica-tions on a quick turn-around basis.

Some of the coatings available are:

cadmium / yellow chromate

inorganic zinc / various types of

PTFE and Cermet coatings

Heat TreatingWe have our own in-house

furnaces for heat treating and

modifying bolting components

to ASTM specifications.

TestingOn-site mechanical testing

laboratory for ASTM standards

compliance documented via

in-house generated MTRs

Yield, Tensile, Hardness, Charpy,

Proof Load, and CMM

PMI testing

GASKETS & SEALS

Ring Joint GasketsHuge inventory of standard API sizes

“R”, “RX”, and “BX” gaskets

Soft Iron, Steel, F5,304, and 316 materials

Turned Parts

Dan-Loc Group operates over 30 CNC lathes, many with live toolingto produce parts with close tolerances and can accommodate up to24.5 inches (620 mm) in diameter and 80 inches (2030 mm) in length.

Dan-Loc Group's machinists are experienced in manufacturingspecialty and complex parts for the energy industry.

Dan-Loc Group also has an in-house qualityassurance lab with CNC Coordinate Measuring

Machines to verify profiles and dimensions.

Dan-Loc Group specializes in the machining of complex parts for the global oil & gas industry. Dan-LocGroup’s machinists are highly experienced in machining a variety of materials with an emphasis on Inconel,Monel, Super Duplex, Heat & Creep resistant steels and other exotic materials as well as the more basic LowAlloy Steels and Corrosion Resistant Alloys. Parts can be produced from various sections such as flat bar,square bar, angled bar, hexagon bar and round bar up to 24.5 inches (620 mm) diameter in varying lengths.

PRECISION MACHINING

Milled Parts

Dan-Loc Group has 4-axis milling capability and the expertise to produce specialtymachined components. Our staff has the experience and capabilities to performcomplex profile milling on difficult to machine materials ranging from high carbonsteel to all grades of stainless steel and exotics.

EDM(Wire and Spark Erosion)

Electrical Discharge Machining (AKA wire & spark erosion andwire & die sink) is used to produce complex, very tight toleranceshapes and features which are difficult to produce usingconventional machining techniques. Dan-Loc Group has accessto over 30 CNC EDM machine tools globally.

Kitson Road, Leeds

West Yorkshire, LS10 1NR

United Kingdom

office: +44 (0)113 245 0726

fax: +44 (0)113 242 0047

Dan-Loc Group - SingaporeJTC Summit

8 Jurong Town Hall Road, #24-05

Singapore 609434

office: +65 6818 0987

fax: +65 6818 0801

Dan-Loc Group - MalaysiaSuite 8-1 & 8-2, Level 8 Menara CIMB

No. 1, Jalan Stesen Sentral 2

Kuala Lumpur Sentral

50470 Kuala Lumpur

office: +603 2298 8496

fax: +603 2298 8201

725 North Drennan / Houston, Texas 77003

phone: 713.356.3500 / fax: 713.356.3501

toll free: 888.396.2658 / www.danlocgroup.com

www.danlocgroup.com

Dan-Loc Express - Ohio294 Fox Drive

Piqua, Ohio 45356

phone: 937.778.0485

Dan-Loc Express - Louisiana2808 South Ruby Ave.

Gonzales, Louisiana 70737

phone: 225.644.6449

“We are in business to take care of our customers!

We will remain a customer-focused company by centering

our culture, decisions, and innovation on their needs.”

Rev17018

QUALITY ASSURANCE

Dan-Loc Group has established strict processes of quality assurance

and quality control which are certified ISO 9001:2008. Our quality manage-

ment system manual is available upon request. We are also in compliance

with the U.S. Fastener Quality Act.

Dan-Loc Group has a full range of in-house testing equipment to cover your measuring,

gauging, destructive and non-destructive testing requirements and assure high quality

products. Mill Test Reports and Certifications are available with each order, upon request.

Dan-Loc Group is an API Spec Q1 Certified manufacturer and licensed to use the API Spec 20E

Monogram (20E-0022) and Spec 6A Monogram (6A-1867). Dan-Loc Group is a global leader in

the manufacturing and distribution of standard and specialty fasteners (all thread studs, tap end studs,

double end studs, Dan-Loc studs and custom bolts), standard and specialty gaskets (API ring gaskets, pro-

prietary subsea and surface wellhead gaskets, spiral wound gaskets and non-metallic gaskets), and precision

machined components.