Pipe Clamps
Pump House Threaded Rod Hangers - Flow & Return Clamps
Features:
• Instant fitting and adjustment.• Folding lock-tab secures pipes into strap.• Black zinc coating matches insulation colour and offers corrosion resistance.
SQUEEZY~FIT Threaded Rod Hangers - These clamps are designed to support a pair of flow and return insulated copper air conditioning pipes and condensate hose on either M8 or M10 threaded rod.
By simply squeezing the tips together the spring steel rod hanger can be fitted or adjusted in seconds, even after the refrigerant pipes have been installed.
www.pumphousepumps.com / Tel: 0115 900 5858
Part Code Description Liquid Pipe Diameter Gas Pipe Diameter Threaded Rod Diameter
TRH-2 “SQUEEZY~FIT” 2 3/8" 5/8" M8 / M10
TRH-3 “SQUEEZY~FIT” 3 1/2" 7/8" M8 / M10
TRH-4 “SQUEEZY~FIT” 4 5/8" 1-1/8" M8 / M10
Features:
• Folding lock-tab secures pipes into strap.• Black zinc coating matches insulation colour and offers corrosion resistance.
Flow & Return Clamps - The asymmetric design provides a perfect fit for a pair of flow and return refrigerant pipesand come in 4 sizes. An 8 mm clearance hole allows the clamp to be fixed directly to any flat surface, such as a wall or ceiling.
Part Code Description Liquid Pipe Diameter Gas Pipe Diameter
FRC-1 Flow & Return Clamp 1 1/4" 1/2"
FRC-2 Flow & Return Clamp 2 3/8" 5/8"
FRC-3 Flow & Return Clamp 3 1/2" 7/8"
FRC-4 Flow & Return Clamp 4 5/8" 1-1/8"