4
DC41 Door Closer with Full Plastic Cover
Similar to LCN 4041
Standard Features
• •• ••
ANSI A 156.4 grade 1 certified Heavy Duty cast iron body; forged steel arm Adjustable size 1 through 6 Barrier free operation Non-handed
••
Adjustable closing and latching speedStandard Tri-packed for regular arm, top jamband parallel arm application
• •
Standard packing including Sex Nuts and BoltsFull plastic cover is standard feature
••
Full cover: Aluminum (AL), Duranodic (DU)
10 Year Warranty
$101.40/each (4to a case)
®� LISTED C,
Technical Dimensions
J I 15/ 6.
(49.2mm)
I r< \. r·-·---o
I -
� I I ('I �
-
I' c'\\ /:,,. '- I ,,
'-.
1"
25,4mm
Description A. Length of Closer BodyB. Horizontal Mounting
HolesC. Vertical Mounting HolesD. Closer Body HeightE. Projection From DoorF. Arm Shoe Spacing Holes
-�. ,, ' {-: \' /
1 -
� '\.
3" I"
(76.2mm) 25.""1m
Dimensions 11" l"CTC 21/4" CTC 2 3/4"
2"
1 15/16" CTC
�
B
D
A
INSTALLATION DIMENSIONS
OPENING 'A' 'B'
TO 100• 7-5/16' 11-13/16'(185) (300)
TO 130" 6·1 /4' 10-13/16'(159) (275)
All Prices in Calalog Subject to Change Without Notice
0
0
DPRA41 Drop Plate Regular Arm Mount Available Finish: AL/DU Required for hinge side mount when top rail is less than 3 3/4." Plate requires 2" minimum top rail. $18.20/each
•• • • ••
. .......
DPTJ41 Drop Plate-Top Jamb Mount Available Finish: AL/DU Required for top jamb when frame face is less than 3 1/2." Plate requires 1 3/4" minimum frame face. For use with plastic cover. $18.20/each
DCCA41 Cush Stop Arm Available Finish: AL/DU $31.20 I each
DCSB175 Sex Bolt Available Finish: AL/DU $2.08/each (Maximum extension 2 1/4")
Accessories
0 ::,
0
DPG41 Drop Plate-Low Clearance Available Finish: AL/DU For use when ceiling clearance prevents normal top jamb mounting, For use when overhead door holder prevents normal top jamb mounting. $18.20/each
C
DPPA41 Drop Plate-Parallel Arm Mount Available Finish: AL/DU Required for parallel arm when top rail is less than 5 1/2", measured from the stop. Plate requires 2" minimum top rail. $18.20/each
DCHA41 Cush Stop Hold Open Arm Available Finish: AL/DU $31. 20 I each
Call for More Information. 5
6
DCSO Door Closer with Full Plastic Cover Similar co Norton 1600
Standard Features • Factory tested to meet or exceed ANSI A 156.4
Grade I• ADA Compliant• Cast aluminum body; forged steel arm• Tri-packed for regular arm, top jamb and parallel
arm application included• Adjustable power, from size 1-4, with adjustable
back check function•
• Standard packing including Sex Nuts and
Bolts $57.20/each (4 to a case)
®� LISTED C,
Technical Dimensions
Hinge
Dimension Oimension"N
Model No.: Inch mm
6 152 DC1050 3-1/2 89
Description A. Length of Closer BodyB. Horizontal Mounting HolesC. Vertical Mounting HolesD. Closer Body HeightE. Projection From DoorF. Arm Shoe Spacing
Opening Angle
120°
180°
Dimensions 9 3/4" 9 1/16" CTC 3/4" CTC 1 13/16" 2 3/4" 1 3/4" CTC
All Prices in Calalog Subject to Change Without Notice
0
DPPASO
3 1/2'' Tall Drop Plate Available Finish: AL/DU
$15. 60 I each
DCCASO
Cush Stop Arm Available Finish: AL/DU
$31. 20 I each
Accessories
,..
"
e
DPTJSO 2 9/16" Tall Narrow Drop Plate Available Finish: AL/DU
$15.60/each
DCHASO
Cush Stop Hold Open Arm Available Finish: AL/DU
$31. 20I each
Call for More Information. 7
8
Grade Two Lock Se1 •
• •
•
•
•
6 pin 11C" Keyway Ansi Strike 4 7 /S
i
' x 1 1/4" 2 3/ 4" Backset 1 3/8" - 2" Doors
•
UL Latch 1/2" Throw Removable Thru Bolts 2 3/8" Latch Sold Separately
* indicates rigid lever setsEntry
Part Number
2000-Clare-l l -26D
2000-Clare-l l -1 OB
2000-Clare-l 1-3
2000-Clare-l 1-IC-26D
2000-Clare-l 1-IC-3
2500-Clare-11-26D *
Storeroom
Part Number
2000-Clare-12-26D
2000-Clare-12-1 OB
2000-Clare-12-3
2000-Clare-12-IC-26D
2000-Clare-12-IC-3
2500-Clare- l 2-26D *
Classroom Part Number
2000-Clare-l 7-26D
2000-Clare-17 -1 OB
2000-Clare-17-3
2000-Clare-17-IC-26D
2000-Clare-17-IC-3
2500-Clare- l 7-26D *
Privacy
Part Number
2000-Clare-02-26D
2000-Clare-02- l OB
2000-Clare-02-3
2500-Clare-02-26D *
Passage Part Number
2000-Clare-01-26D
2000-Clare-01-1 OB
2000-Clare-O 1-3
2 3/8" Latches GR2-238-DL-26D
GR2-238-SL-26D
Finish
26D
lOB
3
26D
3
26D
Finish
26D
lOB
3
26D
3
26D
Finish
26D
lOB
3
26D
3
26D
Finish
26D
IOB
3
26D
Finish
26D
lOB
3
Function C tinder/Core
11 Standard
11 Standard
11 Standard
11 SFIC
11 SFlC
11 Standard
Function C tinder/Core
12 Standard
12 Standard
12 Standard
12 SFIC
12 SFIC
12 Standard
Function tinder/Core
17 Standard
17 Standard
17 Standard
17 SPIC
17 SPIC
17 Standard
Function Price
2 $51.48
2 $51.48
2 $51.48
2 $51.48
Function Price
1 $51.48
1 $51.48
1 $51.48
Grade 2, 2 3/8 Dead Latch 26D
Grade 2, 2 3/8 Spring Latch 26D
Price
$56.68
$56.68
$56.68
$56.68
$56.68
$56.68
Price
$56.68
$56.68
$56.68
$56.68
$56.68
$56.68
Price
$61.88
$61.88
$61.88
$61.88
$61.88
$61.88
$9.75
$9.75
All Prices in Calalog Subject to Change Without Notice
Grade One Lock Sets • 6 pin "C" Keyway• Ansi Strike 4 7/8" x 1 1/4"• 2 3/4" Backset• 1 3/8" - 2" Doors• UL Latch 1/2" Throw• Fixed Thrubolts• Non-Handed Clutch Lever
Entry • 2 3/8" Latch Sold Separately
Part Number Finish Function C linder/Core Price
1 OOO-Clare-1 l -26D 26D 11 Standard $77.48
1000-Clare-ll-lOB lOB 11 Standard $77.48
1 OOO-Clare-11-3 3 11 Standard $77.48
1000-Clare-ll -IC-26D 26D 11 SFIC $77.48
1000-Clare-1 l -IC-3 3 11 SFIC $77.48
Storeroom
Part Number Finish Function linder/Core Price
1000-Clare-l 2-26D 26D 12 Standard $77.48
1000-Clare-12-lOB lOB 12 Standard $77.48
1000-Clare-l 2-3 3 12 Standard $77.48
1 OOO-Clare-12-IC-26D 26D 12 SFIC $77.48
1000-Clare-12-IC-3 3 12 SFIC $77.48
Classroom
Part Number Finish Function C linder/Core Price
1000-Clare-l 7 -26D 26D 17 Standard $86.68
1000-Clare-17-lOB lOB 17 Standard $86.68
1000-Clare-l 7 -3 3 17 Standard $86.68
1000-Clare-l 7 -IC-26D 26D 17 SFIC $86.68
1000-Clare-l 7-IC-3 3 17 SFIC $86.68
Privacy
Part Number Finish Function Price
1 OOO-Clare-02-26D 26D 2 $67.08
1000-Clare-02-lOB lOB 2 $67.08
1 OOO-Clare-02-3 3 2 $67.08
Passage
Part Number Finish Function Price
1 OOO-Clare-Ol-26D 26D 1 $67.08
1000-Clare-01-lOB lOB 1 $67.08
1000-Clare-O 1-3 3 1 $67.08
2 3/8" Latches GR1-238-DL-26D Grade 1, 2 3/8 Dead Latch 26D $9.75
GR1-238-SL-26D Grade 1, 2 3/8 Spring Latch 26D $9.75
*Custom Keying available. Call for a price quote.
Call for More Information. 9
Commercial Deadbolt (Schlage C Keyway)
• 6 pin "C" Keyway• Ansi Strike 1 1/8" x 2 314"• 2 314" Backset• 1 318" - 2" Doors• UL Latch 1" Throw• 2 318" Latch Sold SeQarately
Grade One
Part Number Finish Price
Single Deadbolt 101-234-26D 26D $ 41.08
Sin le Deadbolt 101-234-3 3 $41.08
Double Deadbolt 102-234-26D 26D $51.48
Double Deadbolt 102-234-3 3 $51.48
101-IC-234-26D 26D $46.28
Grade Two
Part Number Finish Price
201-234-3 3 $25.48
Sin le Deadbolt 201-234-32D 32D $25.48
Double Deadbolt 202-234-3 3 $35.88
Double Deadbolt 202-234-32D 32D $35.88
201-IC-234-26D 26D $41.08
Grab Bars (1 1/2" Diameter Stainless Steel)
Part Number Description Finish Price
FGB42-CP-32D Grab Bar SIS Center PT CONC SCR 42" 32D $49.40 ea
FGB42-32D Grab Bar SIS CONC SCR 42" 32D $39.00 ea
FGB36-32D Grab Bar SIS CONC SCR 36" 32D $35.88 ea
FGB30-32D Grab Bar SIS CONC SCR 30" 32D $30.68 ea
FGB24-32D Grab Bar SIS CONC SCR 24" 32D $28.12 ea
FGB18-32D Grab Bar SIS CONC SCR 18" 32D $25.48 ea
10 All Prices in Calalog Subject to Change Without Notice
Butt Hinges • 41/2" x4 1/2"
• Square Corners• .134" Thick• Packed with Machine and
Wood Screws• 3 Hinges per Set• 16 Sets per Case
Steel
Part Number
S45USP
S45BBUSP
S45BBUSPNRP
S4526D
S45BB26D
S45BB26DNRP
Stainless Steel
Part Number
SS45BB32DNRP
Spring Hinges
Part Number
SH4526D
Description
Plain Bearing
2 Ball Bearing
2 Ball Bearing / NRP
Plain Bearing
2 Ball Bearing
2 Ball Bearing/ NRP
Description
2 Ball Bearing / NRP
Description
Plain Bearing
Price
$8.32per set
$9.36 per set $10.04 per set
$9.36 per set
$10.92 per set
$11.44 per set
Price
$35.36 per set
Price
$9.36 Each
Continuous Gear Hinges Aluminum / Heavy Duty C=Clear D=Dark Bronze
Part Number Len th Description Price
AllOHDC 83" Full Concealed $69.68 AllOHDD 83" Full Concealed $89.96 A210HDC 83" Full Surface Swing Clear for Flush Mounted Doors $107.64
A210HDD 83" Full Surface Swin Clear for Flush Mounted Doors $137.80 A570HDC 83" Full Surface for Narrow Frame Leaf, 1/1611 inset $107.64
A570HDD 83" Full Surface for Narrow Frame Leaf, 1/16" inset $137.80 A571HDC 83" Full Surface $118.56 A571HDD 83" Full Surface $152.36
Call for More Information. 11
12
Knob/ Lever/ DB Cylinder - KOOl • Solid Brass• Precision Depths & Spacing• 2 Keys• Drilled 6• Pinned 5 (some pinned 6)• Packed with 5 tailpieces
• Finish: US4, 26D
$13.00 I each
Rim Cylinder - R118
Mortise Cylinder - MlOO • Solid Brass• Precision Depths & Spacing• 2 Keys• Drilled 5• Pinned 5• 1 fl
• Solid Brass• Precision Depths & Spacing• 2 Keys• Drilled 6• Pinned 5 (some pinned 6)• 1 1/8"
• Finish: US3, USlOB, US26D
$13. 00 I each
• Cam: Standard, Adams Rite, Cloverleaf,Schlage L, Sargent/Yale, Segal
• Finish: US3, USlOB, US26D
Mortise Cylinder - M 118 • 1 1/8"
Mortise Cylinder - M 114 • 11/4"
$11.9 6/each
Available Keyways • AW (Arrow)• CB ( Corbin 60)• CL4 ( Corbin L4)• KW (Kwikset)• RD 1 (Russwin D 1)
• SA (Sargent LA)• RA (Sargent RA)• SC (Schlage C)• SX (Schlage C-K)• SCE (Schlage E)
• WR (Weiser E)• YA (Yale 8)• YGA (Yale GA)
All Prices in Calalog Subject to Change Without Notice
Mortise Thumb Turn • Solid Brass• Finish: US3, USlOB, US26D
Part Number
MlOOT
M118T
M114T
Description Price
1" Available in Adams Rite Cam $7.80 ea
1 1/8" Available in Adams Rite & Standard Cam $8.32 ea
1 1/4" Available in Standard Cam $8.84 ea
Mortise Cylinder Dummy • MlOOD l''• Mll8D 1/18"• Ml 14D 1 1/4"• Solid Brass
• Finish: US3, USl OB, US26D
$7.80/each
Interchangeable Core - IC7 (SFIC) • Keyways: Best A, B, C,
D, E, F, G, H, J, K, L, M• Finish: US4, US26D
• Solid Brass• 7 Pin
• Uncombinated
$10.40/each
Part Number
ICH138
ICH114
ICH114R
SFIC Key Blank - ICKB • Solid Brass• Precision Depths & Spacing• Keyways: Best A, B, C, D, E, F,
G,H,J,K,L,M
$1.30/each
SFI C Housings • Solid Brass• Finish: US3, USlOB, US26D
Description Price
1 3/8" Mortise Housin $16.64 ea
1 1/4" Mortise Tapered Housing $17.68 ea
1 1/4" Rim Housin $18.20 ea
• Finish: BR (Brass), NP (Nickel Plated),NS (Nickel Silver)
Call for More Information. 13
14
Security Door Camera
• Increase Home Security• Captures & Records visitors even
while you're away• No wires or damage to the door• Convenient for children and elderly
$87-88
PLATINUM SV-2
Sl:(:IJl�I: \fll:\�f SECURITY DOOR CAMERA
• Power source: 4 x AA Batteries• Fits any door: 1.57" - 2.76" thick• Fits any barrel hole: 0.5" - 0.8"• Size: 5.3"W x 3.3"H x 0.96"D•
•
•
•
.3 Megapixel Camera2 GB SD Card IncludedPhotos stored as JPEG, Videos as MP4Available colorsBlack/Silver/Champagne
Exterior View
$67-08
SV-1
Sl:(:IJl�I: \fll:\�f SECURITY DOOR VIEWER
• Power source: 4 x AA Batteries• Fits any door: 1.57" - 2.76" thick• Fits any barrel hole: 0.5" - 0.8"• Size: 5.3"W x 3.3"H x 0.96"D• .3 Megapixel Viewer• Available colors
Black/Silver/Champagne
Exterior View
All Prices in Calalog Subject to Change Without Notice
R0.050
587 Threshold
Heavy duty threshold (.150 thick) in a mill finish. Comes supplied with #10 x 11/2 screws and anchors, plus additional screws to pre-install thresholds to hollow metal frame, replacing the need for spreader bars.
I
587HD-36 - $27.04
587HD-48 - $38.48
587HD-72 - $49.40
I
0.932--------4.012-------11-•-0.932
� �� �
�·· � �·� 0.345
I �
1.000
------3.2�0_34 ____ _
o.2ii00
ib0.410 OD W/ 80' OPENING
(2)
0.3ii008 1--------4.263--------1
i-----------s.atfs044-·-----------i
115()1-111-AI. DETAIL
SCALE 3X 2 PL
�
ACES. DETAIL
.
.179,.
{
SCALE 3X Pl-l'l 6 PLACES
30•
·- yp 1--,;121 ·-I
I-Pl
pf�.� � .150
Thresholds are .150" thick and weight 1.726 lbs. per foot. Mill Finish Thresholds are supplied with Zinc Plated Screws # 10 x 1 1/2 and Anchors. Tapcons are optional. CXPOSE1> SURF ACE r-----------------------------------------1
I I
�i1-r:r-r-rr'�.�. .'500 --'--+-l----H---- --H-----'---!
1--------aooo--------1
850HD-AL-36" = $28.60
850HD-AL-48" = $39.00
850HD-AL-72" = $57.20
*Custom lengths available.Call for More Information.
15
16
Heavy Duty Thresholds at Standard Threshold Pricing
• .15" Thick
i�5(Jlill-AI.
EXPOSED ,
-------- St>RfACE ------ --
1 FSFFF
.J
55()1-IIJ-AI.
0 .. 5 I"'
o.1�--1----
6063-T6 Aluminum -------5.�-------i
0.9961
Ml I
_J ___ ,.,
0.1�0�
-(>)
0'3�0.11fa
007t H·m� IEXPOSED 1
'27iit \t!tf'---+--1 _______ --- - SURrACE -----------,
L6'i 1,J
65()1-IIJ-AI.
6063-T6 Aluminum 1------&.�------l
1---Moo---i-1.0&1-f-1.011+0.n1
O.J50!1I I I
r--·-----------sx�E�-------� ,�J� L,� i•� "ll°"+
I SURFACE ---i-=,.s��2.� 1.5�
l_, 71 F 7 12 ,J 6063-T6 Al11min11m
0.020 ..,
0.015 OP. X 90i,i
}VI.ill Finish Thresholds are supplied with Zinc Plated Screws #10 x 11/2 & Plastic Anchors. ·concrete Screws are optional. Price
450HD-AL SSOHD-AL 650HD-AL
36" $13.52 $18.46 $26.00 48" $18.72 $24.98 $36.92 72" $23.14 $31.20 $46.80 Made in America
*Custom Sizes Available. Please Call For Pricing.All Prices in Calalog Subject to Change Without Notice
i�251ill-AI.
EXPOSED i----------- SURFACE ----------i I I I
---I
L L_j
..... ,0.150 ,,. ......
o.na------2.s2s---"' A-Pt
0.015 OP. X 9�,J
4,rJj,03, _____ _,
6063-T6 Aluminum
-------5.�--------l
0.7241
0.531 t:
0.9961 .. Pt-Pt ,s .. ,i
(2) (2) A 8 -...... ---.....
0.015 OP. X 90j2)
5251-IIJ-AI. \
,-o.11fs"'t
T-o.1�00.121-j �.1W
� J! 0.094
EXPOSED
(2) "' (2) (>)
.....
1 .275 2.450 1 .275 "' "'
I - - - - - - - - - -- SURFACE - - - - - - - - - - - I I ' '-• I I
I I
da_J
0.1�' ,,,. ....
6063-T6 Aluminum
...... t------6.000-----�
�--3.000 , 1.067+1.011+0.92
0.695
10.98S
rl.035
11 0.240 •
,. Pl-flll Jll-fll 1' .. ,
····--6251-lll-AI. 0 0.250
0.1�
EXPOSED
o.2�f""'1- H87� i 0.1� (>) (>)
1.5� 2.�02-·-�-1.5�
r-- --- --- ------ SURFACE - - - - - - - - - - - - - ----i' '-- Zj 7 ,-
6063-T6 Aluminum
Mill Finish Thresholds are suppJjed with Zinc Plated Screws #10 x 11/2 & Plastic Anchors.
Concrete Screws are optional.
Price
425HD-AL 525HD-AL 625HD-AL
36" $13.52 $18.46 $26.00
48" $18.72 $24.98 $36.92
72" $23.14 $31.20 $46.80 Made in America
* Custom Sizes Available. Please Call For Pricing.
Call for More Information.
0.015 OP. X90'l>l
17
18
Custom Notching Custom Notching is now available on all thresholds.
$5.20
Volume Runs subject to additional discounts on notchings services. Call and talk to your sales representative for more details and information.
THRESHOLD STOPS
Mill finish, drilled and countersunk. #6, 3/4" Tek screws included.
,.,.-
Io.o;i""
t0..0G7 0.085
0.113
l / rr-· C,J;°scoa
��:1-__,_.. .f s3001
L.-��--- o.:13
0.497
DRIP EDGES
Comes in a mill finish. #6, 7 /16" Tek screws included.
f 5/s" (15.9)
TS-36 - $6.24
TS-48 - $8.32
TS-72 - $12.48
-
Made in America
*Custom lengths available.
Made in America
DE-36 - $7.80
DE-48 - $9.88
DE-72 - $14.56 - -- - 2½"
(63.5)
* All Drip Edges are cut door width plus 4". Custom lengths available.
All Prices in Catalog Subject to Change Without Notice
45 Degree Weatherstripping Kits
High Quality filament fused to a continuous base to provide a consistent brush barrier. Slotted holes for adjustment. Ideal for low closing force applications. Supplied with #6 7 /16 Tek screws.
WS4550
--0-------"75'7 0.50" [
WS4575
----'-0.75'7 0.75" [
Made in America
WS4550-3070-AL = $28.12 WS4550-4070-AL = $30.16 WS4550-6070-AL = $32.24 WS4550-3070-DU = $36.40 WS4550-4070-DU = $37.44 WS4550-6070-DU = $50.56 WS4575-3070-AL = $30.68 WS4575-4070-AL = $31.72 WS4575-6070-AL = $33.80 WS4575-3070-DU = $37.96 WS4575-4070-DU = $40.04 WS4575-6070-DU = $41.08
Firelands Weatherstripping Kits s0.006
0.040 lYP WAU.
o.eii010
0.210
R0.020
Made in America
0.007 0-150
0.230 REF
WS-3070-AL = $13.00 WS-4070-AL = $14.30 WS-6070-AL = $15.60 WS-3070-DU = $24.96 WS-4070-DU = $26.52 WS-6070-DU = $30.68 Resilience: Very Good Resistance to Fatigue: Very Good Resistance to Weathering: Excellent Service Temperature Range -75* to 350* F Chemical Resistance: Excellent Solvent Resistance: Excellent
Firelands Hardware perimeter gasketing products are designed to seal the gap around the top and two sides of a door assembly. Perimeter gasketing, unless otherwise specified, is designed for openings with 1/16" gaps; however, each weatherstrip can seal gaps with the depth of its seal. Product is punched on 11" center with slotted holes for adjustment. Made with EPDM, a synthetic rubber and an elastomer that has the ability to perform in a wide range of applications and performs better than Vinvyl PVC. Supplied with #6 7 / 16 Tek screws.
Call for More Information. 19
20
HOODED DOOR SWEEPS
Firelands Hardware's Hooded Brush Door Sweep is the convenient, money saving alternative to traditional metal-back brush seals. Made of rugged, yet lightweight and pliable materials, resistant to corrostion and chemicals, with a homogeneous bond between the backing material and the filament.
Firelands Hardware's new large weatherblock weatherseal ensures a secure seal and a barrier against smoke, air infiltration, and extreme weather. A single durable EPDM rubber insert provides an excellent seal.
DSH = Regular Hooded Door Sweep DSVH = Hooded Door Sweep with EPDM insert
*Custom lengths available. Call for details.Supplied with #6 7/16 Tek screws.
ALUMINUM FINISH
DSVH-AL-36 = $7.80
DSVH-AL-48 = $9.88
DSVH-AL-72 = $15.08
DSH-AL-36 = $6.76
DSH-AL-48 = $8.58
DSH-AL-72 = $13.26
CLEAR ANONDIZED FINISH
DSVH-CL-36 = $9.10
DSVH-CL-48 = $10.87
DSVH-CL-72 = $18.20
DSH-CL-36 = $8.32
DSH-CL-48 = $9.36
DSH-CL-72 = $15.60
DARK BRONZE FINISH
DSVH-DU-36 = $9.62
DSVH-DU-48 = $11.70
DSVH-DU-72 = $18.20
DSH-DU-36 = $8.84
DSH-DU-48 = $10.92
DSH-DU-72 = $16.64
DSH
1.375
j 1"
Made in America
DSVH
I 1.375
j 1"
EPDM Rubber fnsert
0.050
0,050
t
All Prices in Calalog Subject to Change Without Notice
Door Sweep with EPDM Insert
Firelands Hardware's new large weatherblock weatherseal ensures a secure seal and a barrier against smoke, air infiltration, and extreme weather. A single durable EPDM rubber insert provides an excellent seal.
DSV36-AL = $6.50
DSV48-AL = $8.71
DSV72-AL = $13.00
DSV36-DU = $9.88
DSV48-DU = $13.00
DSV72-DU = $19.24
Supplied with #6 7/16 Tek screws.
*Custom Sizes Available
Firelands Door Sweeps
Firelands Hardware's Brush Door Sweep is the convenient, money saving alternative to traditional metal-back brush seals. Made of rugged yet lightweight and pliable materials, resistant to corrostion and chemicals, with a homogeneous bond between the backing material and the filament.
o.r-. -"" ......
i'0.025
o.JK' Made in America
DS36-AL = $5.62
DS48-AL = $7.41
DS72-AL = $11.23
DS36-DU = $8.58
1" DS48-DU = $11.96
DS72-DU = $17.16
J.8'
*Custom Sizes Available
Supplied with #6 7 /I 6 Tek screws.
Tape Roll
Doublesided adhesive tape for Weatherstripping and Door Sweeps. A total of2IO feet of tape per roll.
TAPE-1 = $26.00
Call for More Information. 21
22
Panic Device Exterior Options
t TL-12-32D
This is a Classroom Handleset for all wide and medium stile doors. For use on a door's exterior with a Panic Device. Covers the standard 2 .165" bore hole prep. Packaged with rim lock cylinder (Schlage C Keyway), mounting hardware, instructions, and 2 keys.
Comes in Stainless Steel. Handle plate height: 13. 75" Handle plate width: 3' Pull Handle, 5 1/2" CTC Pull projection: 1.85"
$67.08
TR-HD-12-32D
This is a wide Escutcheon Plate Classroom Lever that is suitable for all wide and medium stile doors. For use on a door's exterior with a Panic Device. Heavy Duty Commercial set covers the standard 2.165" bore hole prep.Packaged with mounting hardware, instructions, and 3 keys.
Stainless Steel Handle plate height: 9" Handle plate width: 3" Lever projection: 2"
Lever Length: 5" ADA Compliant
$93.08
All Prices in Calalog Subject to Change Without Notice
Panic Device Exterior Options
I)
(
f.
0
PP312-32D
Pull handle trim to be used with a Panic Device. For use on a door's exterior with a Panic Device.
Comes in Stainless Steel. Handle plate height: 11.8" Handle plate width: 3" Pull Handle, 6 1/2" CTC Pull projection: 2.5"
$25.48
Stainless Steel Trim Kits
Heavy duty commercial set covers a standard 2.165" bore hole door p rep. Packaged with mounting hardware, instructions, and 3 keys (keys in entry function only).
Finish: 32D or lOB Rosette Diameter: 3.35" Lever Length: 5.2" Lever Projection: 2.67" ADA Compliant Non Handed
2012-TR Entry Function
$48.36
2001-TR Passage Function
$46.28
Call for More Information. 23
0 0
0
Description Finish Price
PDVR36-DURO Panic Device 36" Vertical Rod Duro $176.80 ea
PDVR36-AL Panic Device 36" Vertical Rod Aluminum $176.80 ea
PDVR36UL-AL Panic Device 36" Vertical Rod Aluminum $259.48 ea
PDVR36UL-DURO Panic Device 36" Vertical Rod Duro $259.48 ea
PDR36-DURO Panic Device Rim Standard Duro $108.68 ea
PDR36-AL Panic Device Rim Standard Aluminum $108.68 ea
2000-CLARE-TR-1 OB Clare Classroom Trim IOB $51.48 ea
2000-CLARE-TR-26D Clare Classroom Trim 26D $51.48 ea
PDR 36UL - 32D* Exit Device Rim 36"/UL Fire Rated-3 hrs 32D $197.60 ea
PDRVR 36UL - 32D* Exit Device Rim 3611
with Vertical Rod/ 32D $275.60 ea UL Fire Rate-3 hrs
• All products listed below are UL grade 1.
Description Finish Price
Painted Aluminium Panic Device AL $93.08
PD-600-36-DU Painted Dark Bronze Panic Device DU $93.08
PD-600-36-32D Stainless Steel Panic Device 32D $103.48
PD-F60-36-DU UL 3 Hour Fire Rated Dark Bronze Panic Device DU $113.88
PD-F60-36-32D UL 3 Hour Fire Rated Stainless Steel Panic Device 32D $129.48
DDS Double Door Strike NIA $13.00
,. ___NL � ..
� @•
-1.5 ... .[Q
-. 6.25 2.4
1.1 '
24 All Prices in Catalog Subject to Change Without Notice