TIBCO.BrainDump.TB0-120.v2012-08-02.by.sindhu€¦ · TIBCO Enterprise Message ... How can the...

TB0-120qa112

Number: 000-000Passing Score: 800Time Limit: 120 minFile Version: 1.0

http://www.gratisexam.com/

Tibco TB0-120

TIBCO Enterprise Message ServiceTM 6 Certification

Exam

Version: 4.0Tibco TB0-120 Exam

Exam A

QUESTION 1Which three commands will update EMS configuration files when an exclusive commit command is issuedfrom EMS? (Choose three.)

A. set server client trace=enabledB. set server password=passwordC. set server authorization=enabledD. set server track_message_ids=enabledE. set server routing=enabled

Correct Answer: BCDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 2Which two actions are most likely to improve EMS server performance? (Choose two.)

A. Adding an additional CPU to the server running EMSB. Improving physical disk performanceC. Switching from a file-based store to a database storeD. Increasing network I/O capacity on the server

Correct Answer: BDSection: (none)Explanation


QUESTION 3The company naming standard states that all queue names must start with the letter C.

How can the administrator of the EMS server enforce this naming standard for dynamic queues?

A. By disabling creation of dynamic destinations in the tibemsd.conf fileB. By changing create-destination permission for usersC. By having c. > as the only entry with a wildcard in the queues.conf fileD. By setting a rule to add c. as a prefix to all dynamic queues

Correct Answer: CSection: (none)Explanation


"Pass Any Exam. Any Time." - www.actualtests.com 2Tibco TB0-120 Exam

QUESTION 4Which two statements are true about the listen parameter? (Choose two.)

A. The listen parameter is set in the tibemsd.conf file.B. Multiple listen parameters can be set in the TIBCO EMS configuration file.

C. TCP is the only protocol supported in the listen parameter.D. The listen parameter is set in the transports, conf file.

Correct Answer: ABSection: (none)Explanation


QUESTION 5Which two statements are true about selector functions? (Choose two.)

A. A selector's conditional expression can refer to values of the message body.B. They are available for use in the bridging functions, helping to reduce unnecessary network traffic.C. They are useful when used in conjunction with topic browser functions.D. They are available to control the flow of messages along a route.



QUESTION 6Which command displays message count delivered to a queue receiver?


A. Show consumersB. Show receiversC. Show connectionsD. Show users

Correct Answer: ASection: (none)Explanation



QUESTION 7Which two statements are true about routing queue messages? (Choose two.)

A. Routed queue messages can travel to adjacent servers without reaching the home queue.B. Each server in the route path must have its queue defined as global.C. The concept of zones and hops does not apply to queue messages.D. Queue messages can travel multiple hops.

Correct Answer: BCSection: (none)Explanation


QUESTION 8An EMS server and client are receiving heartbeats. Given the following EMS server settings:

- client_timeout_server_connection = 20 seconds- server_timeout_client_connection = 10 seconds

What are two possible outcomes? (Choose two.)

A. If EMS server does not receive heartbeats from a client for a period exceeding 10 seconds, the EMSserver will close the connection.

B. If EMS server does not receive heartbeats from a client for a period exceeding 20 seconds, the EMSserver will close the connection.

C. If a client does not receive heartbeats from EMS server for a period exceeding 10 seconds, the clientwill close the connection.

D. If a client does not receive heartbeats from EMS server for a period exceeding 20 seconds, the clientwill close the connection.

Correct Answer: ADSection: (none)Explanation


QUESTION 9Which two conditions can cause messages in a queue to be moved to the undelivered queue? (Choosetwo.)

A. The number of delivery attempts has reached the limit defined for the queue.B. The number of pending messages has reached the limit defined for the queue.C. The length of time the message has been retained in the queue has exceeded the limit defined "Pass

Any Exam. Any Time." - www.actualtests.com 4Tibco TB0-120 Examfor the queue.

D. The overflow policy for the queue has been set to discard the oldest messages.

Correct Answer: ACSection: (none)Explanation


QUESTION 10Which two statements are true about synchronous and asynchronous message consumption? (Choosetwo.)

A. For synchronous consumption, the message consumer explicitly invokes a receive call on the topic orqueue.

B. The consumer can receive messages synchronously by registering a synchronous message listener toreceive the messages.

C. When asynchronously receiving messages, the consumer remains blocked until a message arrives.D. For asynchronous consumption, a message listener can be implemented that serves as an

asynchronous event handler for messages.



QUESTION 11Atopic sales, topic is bridged to two queues: FINANCE.Q and AUDIT.Q. Ten messages are sent on thetopic SALES.TOPIC. A consumer reads ten messages from FINANCE.Q.

How many messages are now in the AUDIT.Q?

A. zeroB. fiveC. tenD. twenty




QUESTION 12A dynamic queue named q1 has been created by an EMS client.

What will be the result of executing the following command: create queue q1?

A. The command will fail saying the queue already exists.B. The command will fail if queue has connected receivers.C. The command will succeed and queue will be promoted to static.D. The command will succeed and dynamic queue will be renamed.



QUESTION 13How does a backup fault-tolerant server detect a failure of the primary fault-tolerant server?

A. TCP heartbeats sent from the primary serverB. TCP heartbeats sent from the backup serverC. Multicast heartbeats sent from the primary serverD. Multicast heartbeats sent from the backup server



QUESTION 14Which command creates a connection factory of type queue?


A. Option AB. Option BC. Option CD. Option D



QUESTION 15When a single message consumer is connected with an EMS server, which action can be used to improvemessage consumption?

A. Enabling automatic acknowledge of all messages by the sessionB. Changing delivery mode from PERSISTENT to NON_PERSISTENTC. Increasing the prefetch valueD. Creating another instance of EMS server



QUESTION 16Which two datastores are supported by EMS servers? (Choose two.)

A. mstoreB. in-memorydatagridC. ledger fileD. file

Correct Answer: ADSection: (none)

Explanation


QUESTION 17Which three conditions cause a trace entry when message tracing is enabled? (Choose three.)

A. Messages are received into a destination."Pass Any Exam. Any Time." - www.actualtests.com 7Tibco TB0-120 Exam

B. Messages are sent to consumers.C. Messages are purged.D. Messages are sent across a destination bridge.E. Messages are swapped out to disk.

Correct Answer: ABDSection: (none)Explanation


QUESTION 18There is a non-fault-tolerant server running on a host named SERVER_A. There are two other serversrunning on the hosts FT_PRIM and FT_BACK configured as a fault-tolerant pair using shared state.FT_PRIM runs the primary server, and FT_BACK runs the backup server.

Which statement is true about these servers?

A. The SERVER_A server can create a route to the fault-tolerant pair.B. SERVER_A can only create a route to the primary server FT_PRIM.C. The backup server must append _backup to the primary server's name.D. The server name on SERVER_A must match the primary server name on FT_PRIM



QUESTION 19Which three properties can be inherited by a dynamic queue? (Choose three.)

A. traceB. channelC. delivery_modeD. storeE. exclusive

Correct Answer: ADESection: (none)Explanation


QUESTION 20"Pass Any Exam. Any Time." - www.actualtests.com 8

Tibco TB0-120 ExamWhich command should be used to modify an existing connection factory QueueconnectionFactory?

A. addprop factory QueueconnectionFactoryB. change factory QueueconnectionFactoryC. updateprop factory QueueconnectionFactoryD. modify factory QueueconnectionFactory



QUESTION 21Which three configuration files are used by EMS? (Choose three.)

A. jaas.confB. producers.confC. channels.confD. routes.confE. consumers.confF. listeners.conf

Correct Answer: BEFSection: (none)Explanation


QUESTION 22Which three statements correctly describe the differences between EXPLICIT_CLENT_ACKNOWLEDGEand CLIENT_ACKNOWLEDGE acknowledgments? (Choose three.)

A. EXPLICIT_CLIENT_ACKNOWLEDGE acknowledges only the individual message, rather than allmessages received so far on the session.

B. CLIENT_ACKNOWLEDGE is possible for a consumer to fall behind in its message processing andbuild up a large number of unacknowledged messages.

C. EXPLICIT_CLIENT_ACKNOWLEDGE is possible for a consumer to fall behind in its messageprocessing and build up a large number of unacknowledged messages.

D. CLIENT_ACKNOWLEDGE "lazily" acknowledges only the individual message, rather than all messagesreceived so far on the session.

E. CLIENT_ACKNOWLEDGE acknowledges only the individual message, rather than all "Pass Any Exam.Any Time." - www.actualtests.com 9Tibco TB0-120 Exammessages received so far on the session.

Correct Answer: ABCSection: (none)Explanation


QUESTION 23Which two statements are true about message selectors? (Choose two.)

A. They can be applied on bridges and routes.

B. They can be applied on header, properties, and body of the message.C. They can be applied only on header and properties of the message.D. They can be applied only on header of the message.



QUESTION 24What must you do to set an EMS Java client application to attempt reconnection 10 times to the EMSserver during fault tolerance switch or when a connection is being terminated by the network? (Choosetwo.)

A. before creating a connection, set the connection factory object "factory" with the following parameters:factory.setReconnAttemptCount(10);

B. before creating a connection, set the connection factory object "factory" with the following parameters:factory.setConnAttemptCount(10);

C. define the following Java system property for ConnectionFactory property: -Dcom.tibco.tibjms.connect.attemptcount=10

D. define the following Java system property for ConnectionFactory property: -Dcom.tibco.tibjms.reconnect.attemptcount=10



QUESTION 25Which two statements are true about load balancing with EMS? (Choose two.)

"Pass Any Exam. Any Time." - www.actualtests.com 10 Tibco TB0-120 Exam

A. EMS servers should not be load balanced with durable subscribers.B. Each consumer must maintain connections to all servers.C. Load balancing should be avoided when the application requires strict message ordering.D. Two load balanced servers can also be configured as a fault-tolerant pair.



QUESTION 26Which two objects are referred to as EMS administered objects? (Choose two.)

A. connection factoriesB. topicsC. groupsD. connectionsE. users

Correct Answer: ABSection: (none)

Explanation


QUESTION 27You have a routed queue named ORDER. NEW defined between the US-EMS (home queue) andMEXICO-EMS servers

What must be done for messages to route properly?

A. Send a message to the routed queue named order. NEW@MEXICO-EMSB. Send a message to the queue named order. NEW@US-EMSC. Send a message to the queue named ORDER, NEWD. Define ORDER.NEW@home in the US-EMS server's queues, conf file



QUESTION 28"Pass Any Exam. Any Time." - www.actualtests.com 11 Tibco TB0-120 ExamWhich two parameters in the main configuration file affect memory usage of the EMS server? (Choosetwo.)

A. max_msg_memoryB. max_memoryC. reserve_msg_memoryD. reserve memory



QUESTION 29What are the three options for the user_auth parameter in EMS? (Choose three.)

A. IdapB. sslC. localD. jaasE. x.509

Correct Answer: ACDSection: (none)Explanation


QUESTION 30Which two parameters must be edited/added in the tibemsd.conf file when configuring database- basedstores? (Choose two.)

A. dbsto re_odbc_driverB. dbsto re_classpathC. dbstore_nameD. dbstore driver dialect



QUESTION 31"Pass Any Exam. Any Time." - www.actualtests.com 12 Tibco TB0-120 ExamWhich statement is true about message compression with EMS?

A. Properties and headers are also compressed.B. Properties are compressed, but headers are not.C. Headers are compressed, but properties are not.D. Body is the only message part that is compressed

Correct Answer: DSection: (none)Explanation


QUESTION 32Which two statements are true about RELIABLE_DELIVERY mode? (Choose two.)

A. It is a TIBCO extension to JMS.B. With RELIABLE_DELIVERY mode, the server sends the producer a receipt confirmation.C. Reliable mode decreases the volume of message traffic, allowing higher message rates.D. With RELIABLE_DELIVERY mode, the producer receives a response from the server.



QUESTION 33What are two characteristics of multicasting? (Choose two.)

A. The EMS server uses PGM to transmit messages to receivers.B. Multicasting is used in messaging scenarios where high bandwidth delivery of real-time data is a

requirement,C. The producer can choose to use PGM or TCP to send messages to the EMS server,D. The EMS server uses TCP to transmit messages to receivers,E. It reduces network traffic generated between EMS server and EMS client machines.



QUESTION 34"Pass Any Exam. Any Time." - www.actualtests.com 13 Tibco TB0-120 ExamWhich event causes EMS to return a delivered but unacknowledged queue message to be available toanother receiver?

A. Ssys.redelivery.delay queue is purged.B. The client application terminates the connection.C. Ssys.undelivered queue is disabled.D. redeliverydelay property is set to zero.

Correct Answer: BSection: (none)Explanation


QUESTION 35Which statement is true about EMS mstore?

A. It can use file or database as medium.B. It can be configured as async mode.C. It can help recover quickly after a failover.D. It can help reduce memory usage by the EMS server.



QUESTION 36CORRECT TEXT

Which two methods can be used to revoke permissions? (Choose two.)

Use the Administration Tool

Use Administration APIs

Edit the users, conf file

Edit the groups.conf file

A.B.C.D.

Correct Answer: Section: (none)Explanation

Explanation/Reference:

QUESTION 37"Pass Any Exam. Any Time." - www.actualtests.com 14 Tibco TB0-120 ExamThe following topics are defined in topics.conf:

Which Statement is true about the topic mycompany. tibx. eng. all?

A. It is global, but not secure.B. It is secure, but not global.C. It is neither global nor secure.D. It is global and secure.



QUESTION 38A bridge has been configured from topic T1 to topic T2.

Which two statements are true if a message producer sends messages to T1 within a transaction? (Choosetwo.)

A. All messages sent across the bridge are part of the transaction.B. The transaction will fail if the producer does not have permission to send to topic T2.C. The bridge needs to be configured to support transactions.D. The transaction can succeed if the producer only has permission to send to topic T1.



QUESTION 39Which two EMS message types can have nested messages of the same type? (Choose Two.)

A. Map MessagesB. Text Messages

"Pass Any Exam. Any Time." - www.actualtests.com 15 Tibco TB0-120 ExamC. Stream MessagesD. XML Messages



QUESTION 40What are two valid ways to create a Connection Factory? (Choose two.)

A. Create factory myFactory queue url=tcp://server:7777,tcp://server1:8888B. Create factory myFactory queue url=tibjmsnaming://server:7777,tibjmsnaming://server:8888

C. Create factory myFactory queue url=ssl://server:7777D. Create factory myFactory queue url=ems://server:7777E. Create factory myFactory queue url=tibjmsnaming://server:7777



QUESTION 41Which two statements are true about asynchronous message consumption? (Choose two.)

A. Asynchronous consumers use a callback to handle messages,B. Asynchronous consumers must use asynchronous message stores,C. Each asynchronous consumer object can have at most one listener.D. An asynchronous durable subscriber exits once it registers its callback with the server.



QUESTION 42Which two statements are true about configuring security for a fault-tolerant pair that does not share state?(Choose two.)

A. acl.conf settings can differ between servers.B. When SSL is deployed, both servers must use the same certificate(s).

"Pass Any Exam. Any Time." - www.actualtests.com 16 Tibco TB0-120 ExamC. When SSL is deployed, severs can use different certificate(s), but must use the same root certificate

authority.D. All access control settings should be the same on both servers.



QUESTION 43User Bob is in the ENG group with the following permissions:

Which statement is true for user Bob and the topic quote.tibx.us.new?

A. The wildcard topics collide, so the EMS server fails to start.B. The EMS server starts and Bob can publish and subscribe to quote.tibx.us.new.C. The EMS server starts and Bob overrides all the ENG group permission, so Bob cannot subscribe to

quote.tibx.us.new.D. The EMS server starts and Bob inherits all permissions from the ENG group, so Bob cannot publish to

quote.tibx.us.new.



QUESTION 44The customer has identified an interface called "New Customer". When a new customer has been createdin the Customer Care Application, the customer data must be distributed to other applications such asbilling, payments, etc.

What is the most efficient mechanism to implement the message delivery?

A. Point-to-point using topicsB. Point-to-point using queuesC. Publish/subscribe using topics

"Pass Any Exam. Any Time." - www.actualtests.com 17 Tibco TB0-120 ExamD. Publish/subscribe using queues



QUESTION 45Which three message models are supported by EMS? (Choose three.)

A. Publish and subscribe (topic)B. Multicast (queue)C. Point-to-point (queue)D. Multicast (topic)E. Publish and subscribe (queue)

Correct Answer: ACDSection: (none)Explanation


QUESTION 46Which statement is true about EMS routed servers?

A. Messages can be routed in both directions.B. Messages can only be sent from a passive server to an active server.C. Messages can only be sent from an active server to a passive server.D. Messages can only be sent between two active servers.



QUESTION 47

Which section is required in a JMS message?

A. BodyB. HeaderC. FooterD. Properties




QUESTION 48Which two statements are true about logging and tracing capabilities in EMS? (Choose two.)

A. The location of log file is set in tibemsd.conf file via the log_trace parameter.B. Access control violations can be logged to console or log file.C. Message tracing applies to the header and/or body of the message.D. Message tracing can be applied at the destination level, not at message level.



QUESTION 49Which two statements are true about routing zones with more than two EMS servers? (Choose two.)

A. You can have a full mesh topology (every server connected) in a 1hop zone.B. You can have a full mesh topology (every server connected) in an mhop zone.C. Messages are always forwarded one more hop when crossing into a new zone.D. Messages are not forwarded into a 1 hop zone.



QUESTION 50What are two characteristics of topics and queues? (Choose two.)

A. A queue cannot have multiple receivers connected at the same timeB. A topic publisher can send to wildcard topics.C. Each queue message is acknowledged by at most one receiver.D. Each topic message can be acknowledged by multiple consumers.


Explanation/Reference:"Pass Any Exam. Any Time." - www.actualtests.com 19 Tibco TB0-120 Exam

Explanation:

QUESTION 51Which character is valid separator in the URL for a client to connect to a load-balanced EMS server pair?

A. .B. &C. |D. ;



QUESTION 52Which parameter is used to preallocate disk space for the store file?

A. file_minimumB. store_minimumC. file_min_sizeD. store_min_sizeE. file_truncate



QUESTION 53Which two parts are optional in JMS Message Structure? (Choose two.)


A. HeaderB. EnvelopeC. BodyD. PropertiesE. Footer


Correct Answer: AESection: (none)Explanation


QUESTION 54Which statement is true about acknowledgment modes?

A. They determine the way the EMS server sends confirmations to message producers.B. They determine the way message consumers send confirmations to message producersC. They determine the way the EMS server sends confirmations to message consumers.D. They determine the way message consumers send confirmations to the EMS server.



QUESTION 55What are three valid parameters in the factories, conf file? (Choose three.)

A. connectionsB. listenC. metricD. connect_attempt_timeoutE. ssl_auth_only

Correct Answer: CDESection: (none)Explanation


QUESTION 56A topic, conf.file contains the following entry: mycompany. *. hr. > secure

Which two topics will inherit the secure property? (Choose two.)

A. mycompany.south.eng.hr.vacationB. mycompany.south.hr.vacationC. mycompany_office.hr.vacation

"Pass Any Exam. Any Time." - www.actualtests.com 21 Tibco TB0-120 ExamD. mycompany.south.hr.vacation.approvalE. mycompany.south.region.hr.vacationF. mycompany.hr.vacationG. mycompany.south.hr

Correct Answer: AFSection: (none)Explanation


QUESTION 57Which two statements are true about server parameters used to configure statistics? (Choose two.)

A. Server statistics can be disabled using the statistics parameter.B. rate_interval parameter can be set to zero to disable average calculation of producer's statistics.C. Producers statistics can be disabled using the statistics parameter.

D. server_rate_interval parameter can be set to zero to disable average calculation of server statistics.



QUESTION 58Which two configuration files must be modified for EMS to work in multicast mode? (Choose two.)

A. multicast.confB. channels.confC. tibemsd.confD. queues.conf



QUESTION 59Which three parameters should be set to enable extensible authentication? (Choose three)


A. jaas_classpathB. jre_libraryC. jre_homeD. jaci_classpathE. jaas_config_file

Correct Answer: ABESection: (none)Explanation


QUESTION 60Which three commands must be executed to ensure that user ui can only send messages to queue qi?(Choose three.)

A. set server authorization=enabledB. addprop queue q1 exclusive user=u1C. grant admin connect user =u1, queue=q1D. grant queue q1 user =u1 sendE. addprop queue q1 secure



QUESTION 61

Click the Exhibit button.

"Pass Any Exam. Any Time." - www.actualtests.com 23 Tibco TB0-120 ExamA topic named T.MARKETING is used to send marketing information from a SALES application. Themarketing information must be stored as audit information in an audit database and must be stored as datamining information in a data mining database.

An application A is configured to receive audit information from topic MKT.AUDIT.TOPIC and an applicationD is configured to receive data mining information from queue MKT.MINING.QUEUE.

Which bridge configuration properly addresses the requirement?




QUESTION 62What are two valid EMS Message types? (Choose two.)


A. Stream MessageB. Object Message with a .NET objectC. Object Message with any Java objectD. Object Message with a serializable Java object



QUESTION 63A queue is defined as;

A. Nothing happens since there is no receiver on this queue.B. The javax.jms.ResourceAllocationException: Queue limit exceeded error will be returned, and new

messages will be rejected.C. The javax.jms.ResourceAllocationException: Queue limit exceeded error will be returned, and old

messages will be discarded.D. The queue sender will be blocked until the messages are consumed.



QUESTION 64In which two scenarios will the EMS server persist messages? (Choose two.)

A. When messages are sent to a topic with no durable subscriberB. When messages are sent to a topic with one subscriber with a fault tolerant EMS connectionC. When messages are sent to a queue with a PERSISTENT delivery mode "Pass Any Exam. Any Time." -

www.actualtests.com 25 Tibco TB0-120 ExamD. When messages are sent to a queue with a store that is Ssys.failsafe



QUESTION 65Given the following configuration:

A. User3 can create destinations.B. User3 can delete destinations.C. User3 can only delete messages stored on the server.D. User3 can only grant or modify user and admin level permissions



QUESTION 66Which four parameters in tibemsd.conf can be used to quickly identity network connection failures betweenEMS clients and servers? (Choose four.)

A. Server_timeout_client_connectionB. server_client_timeoutC. client_timeout_server_connectionD. client_heartbeat_serverE. server_heartbeat_clientF. server_client_heartbeat

Correct Answer: ACDESection: (none)Explanation



QUESTION 67What are two valid delivery modes in EMS? (Choose two.)

A. RELIABLE_DELIVERYB. DURABLEC. EXPLICITD. PERSISTENTE. GUARANTEED

Correct Answer: BESection: (none)Explanation


QUESTION 68Which statement is true about acknowledgment modes for non-transacted sessions?

A. The acknowledge mode is set on the message producer side.B. The acknowledge mode is set on the message consumer side.C. The acknowledge mode is set by the administrator of the EMS server.D. Only EMS extensions of the acknowledge modes can be set by the administrator of the EMS server.



QUESTION 69Which two permissions can be granted to users to access queues? (Choose two.)

A. subscribeB. browseC. durableD. send




QUESTION 70Which two are valid acknowledgment modes in TIBCO Enterprise Message Service? (Choose two.)

A. ACK_PRODUCERB. CLIENT_ACKNOWLEDGEC. ACKNOWLEDGE_ALLD. AUTO_ACKNOWLEDGEE. TRANSACTIONAL

Correct Answer: AESection: (none)Explanation


QUESTION 71The following topics are defined in topics.conf:

Which two properties are correct for the topic mycompany. tibx. eng. all? (Choose two.)

A. maxmsg=100B. maxmsgs=1000C. maxbytes=200D. maxbytes=2000



QUESTION 72Which two statements are true about EMS management of persistent messages? (Choose two.)


A. Persistent messages published to a topic are always written to disk,B. Persistent messages sent to a queue are always written to disk.C. Persistent messages sent to a queue are written to disk only if that queue has at least one durable

consumer or one consumer with a fault-tolerant connection to the EMS server.D. Persistent messages published to a topic are written to disk only if that topic has at least one durable

subscriber or one subscriber with a fault-tolerant connection to the EMS server.



QUESTION 73What are three valid acknowledgment modes in TIBCO Enterprise Message Service? (Choose three.)

A. EXPLICIT_CLIENT_ACKNOWLEDGEB. NO_ACKNOWLEDGEC. IMPLICIT_CLIENT_ACKNOWLDEGED. IMPLICIT_CLIENT_DUPS_OK_ACKNOWLEDGEE. DUPS_OK_ACKNOWLEDGE



QUESTION 74What are three limitations in the use of wildcards by EMS clients? (Choose three.)

A. Clients cannot subscribe to wildcard topics,B. Clients cannot send to wildcard queues.C. Clients cannot receive from wildcard queues.D. Clients cannot use wildcards for dynamic topics.E. Clients cannot publish to wildcard topics.

Correct Answer: BCESection: (none)

Explanation


QUESTION 75"Pass Any Exam. Any Time." - www.actualtests.com 29 Tibco TB0-120 ExamGiven the following configuration:

What happens when the jMSExpi ration property is set to 60secwhen producing a message?

A. Message expires after 30 seconds.B. Message expires after 60 seconds.C. Message expires after 90 seconds.D. Message expires after 120 seconds.



QUESTION 76Which parameter must be configured for primary and secondary EMS to operate in fault-tolerant mode?

A. ft_passive parameter in the tibemsd.conf fileB. store parameter in the store, conf fileC. server parameter in the tibemsd.conf fileD. ft_factory in the factories.conf file



QUESTION 77Which server parameter in the tibemsd. conf file allows confirmation of NON_PERSISTENT messages tothe producer when authorization is disabled in the server?

A. compliant_ack_checkB. npsend_check_modeC. non persistentD. confirm ok




QUESTION 78Which Context.PROVDER_URL is used to look up EMS administered objects stored in the EMS serverrunning on host EMSHOST on port 7222?

A. emsnaming://EMSHOST:7222B. tibjmsnaming://EMSHOST:7222C. jndi://EMSHOST:7222D. http://EMSHOST:7222E. ems://EMSHOST:7222F. tcp: ://EMSHOST: 7222



QUESTION 79Which method can be used to create custom authorization login modules?

A. NTMLB. JAASC. WS-*D. JACI



QUESTION 80Click the Exhibit button.


An EMS server is configured with a bridge from the topic ORDER.NEW to the queue SALES.ORDERS,Q1.You enable flow control at the server and destination levels (order, new and SALES, ORDERS, Q1) .Thesource destination order, new blocks publishers.

Which two statements are true about flow control? (Choose two.)

A. It blocks the sender but does not send back an error.B. It discards the earliest messages (FIFO).C. It discards the latest messages (FILO).D. It does not discard the messages.




QUESTION 81Which four commands grant the user Bob permission to view topic topic, sample? (Choose four.)

A. Grant topic topic.sample user=Bob viewB. Grant admin Bob view-all

C. Grant admin Bob view topic.sampleD. Grant topic > user=Bob viewE. Grant topic topic.> user=Bob viewF. Grant admin Bob view topics

Correct Answer: ABDESection: (none)Explanation


QUESTION 82What is the command to modify an existing route?

A. setprop route.conf <route name> outgoing_topic=topicName selector="msg-selectorB. setroute <route name> incoming_topic=topicName selector="msg-selector"C. setprop route <route name> outgoing_topic=topicName selector="msg-selector"D. setroute route.conf incoming_topic=topicName selector="msg-selectorp"



QUESTION 83What must you do to set an EMS Java client application to attempt reconnection 10 times with 1000 msdelay between attempts to the EMS server during fault tolerance switch or when a connection is beingterminated by the network? (Choose two.)



Correct Answer: ADSection: (none)

Explanation


QUESTION 84Which three are valid JMS Message types? (Choosethree.)

A. Object MessageB. XML MessageC. SOAP MessageD. Map MessageE. Text Message



QUESTION 85Which two message types are available in EMS? (Choose two)

A. StreamMessageB. XMLMessageC. MapMessage

"Pass Any Exam. Any Time." - www.actualtests.com 34 Tibco TB0-120 ExamD. SOAPMessage



QUESTION 86Which statement is true about configuration file usage for an EMS fault tolerant configuration?

A. Primary and Secondary EMS servers should share the tibemsd.conf file.B. Primary and Secondary EMS servers must share all configuration files.C. Primary and Secondary EMS servers can share all configuration files excluding the tibemsd.conf file.D. Primary and Secondary EMS servers must share all configuration files excluding the stores.conf file.



QUESTION 87Which two datastores are supported by EMS servers? (Choose two.)

A. mstoreB. data gridC. dbstoreD. ledger file



QUESTION 88Which two statements are true about JNDI lookups of EMS administered objects? (Choose two.)

A. EMS client can perform JNDI lookups of administrated objects stored in third-party naming/directoryservices.

B. The EMS server and third-party naming/directory services automatically synchronize "Pass Any Exam.Any Time." - www.actualtests.com 35 Tibco TB0-120 Examadministered objects,

C. EMS client can only perform JNDI lookups on static queues or topics.D. EMS "administered" objects include users/groups.E. Dynamic topics are automatically added to the third-party naming/directory service.

Correct Answer: BESection: (none)Explanation


QUESTION 89There is a non-fault tolerant EMS server running on a host named SERVER_A. There are two other EMSservers running on the hosts FT_PRIM and FT_BACK configured as a fault-tolerant pair using shared state.FT_PRIM runs the primary EMS server and FT_BACK runs the backup EMS server.

Which two statements are true about these servers? (Choose two.)

A. The EMS server names (in tibemd.conf) must be the same on host FT_PRIM and FT_BACK.B. The network hostnames must be the same.C. The SERVER_A EMS server can create a route to the fault-tolerant pair.D. The SERVER_A EMS server can only create a route to the EMS server running on the primary server

FT_PRIM.E. The backup server must append backup to the primary server's EMS server name (in the backup's

tibemsd.conf).



QUESTION 90Which two parameters apply to mstore only? (Choose two.)

A. scan_iter_intervalB. scan_target_intervalC. mstore_fileD. file truncate




QUESTION 91What are four valid EMS Administration Tool commands? (Choose four.)

A. show serverB. addpropC. setpropD. updatepropE. show configF. defrag

Correct Answer: ABCESection: (none)Explanation


QUESTION 92Two EMS servers have an active/active route between them.

How many connections are used to route messages bi-directionally between them?

A. 0B. 1C. 2D. 4



QUESTION 93Which method is used to register the message listener with the message consumer for asynchronousmessage consumption?

A. setListener ()B. setMessageListener ()C. putMessageListener ()D. onMessage ()




QUESTION 94Which three steps should be taken to avoid losing routed topic messages? (Choose three)

A. Use durable subscribers instead of non-durable subscribersB. Create active-passive routesC. Use fault-tolerant format urls to configure routesD. Send persistent messagesE. Create active-active routes



QUESTION 95What are three valid delivery modes in EMS? (Choose three.)

A. PERSISTENTB. GUARANTEEDC. RELIABLE_DELIVERYD. TRANSACTIONALE. NON PERSISTENT

Correct Answer: ACESection: (none)Explanation


QUESTION 96Which two statements are true about topics and queues? (Choose two.)

A. A publisher can publish to a wildcard topic.B. A sender can send to a wildcard queue.C. A queue can only have one consumer per message.D. A queue can only have one exclusive connected consumer at a time.E. A consumer can listen for wildcard topic names.

"Pass Any Exam. Any Time." - www.actualtests.com 38 Tibco TB0-120 ExamF. A consumer can listen for wildcard queue names.

Correct Answer: CESection: (none)Explanation


QUESTION 97Producer A has published a message with expiration time as 30 seconds to a queue with the propertyJMS_TIBCO_PRESERVE_UNDELIVERED set to true.

What happens when the message expires?

A. The message is deleted from the undelivered queue.B. The message is moved to Ssys.undelivered queue.C. The message is moved to Ssys.expired queue.D. The message is completely deleted from the server.

Correct Answer: B

Section: (none)Explanation


QUESTION 98Which four parameters must be set in EMS configuration files to enable the database store feature in thetibemsd.conf? (Choose four.)

A. dbstore_classpathB. dbstore_library_pass-wordC. jre_libraryD. dbstore driver dialectE. dbsto re_driver_passwordF. dbstore_driver_urlG. mstore_libraryH. dbstore_driver_name

Correct Answer: BEFGSection: (none)Explanation


QUESTION 99"Pass Any Exam. Any Time." - www.actualtests.com 39 Tibco TB0-120 ExamClick the Exhibit button.

Two sales systems publish to different topics. You want each topic to be copied to two different queues sothat all topics messages can be processed by both the FINANCE and REPORTING systems.

The EMS server needs to be configured for bridges so that messages sent to either TOPIC.SALES.APJ.TOPIC or SALES.NA.TOPIC will be bridged to both queues FINANCE.VP.Q and FINANCE.REPORT, Q.

Which two are correct configurations in this situation? (Choose two.)





QUESTION 100If authorization is enabled in the tibemsd.conf file and the secure property is set for a destination, when arepermissions checked? (Choose two.)

A. When attempting to become a consumer for a queueB. When a producer sends a message to the destinationC. When creating non-durable subscription for wildcard topicsD. When performing a JNDI lookup of a destination




QUESTION 101Which Administration Tool command creates the queue without reporting any errors?

A. Create queue test.queue store=$sys.failsafe, secure,localB. Create queue test.queue secure,global,store=Ssys.failsafeC. Create queue test.queue secure,store=$sys.failsafe,channel=multicast-lD. Create queue test.queue store=$sys.failsafe,trace=header



QUESTION 102Which three entries are valid in the aci.conf file? (Choose three.)

A. ADMIN USER=userl PERM=allB. TOPIC=foo USER=user2 PERM=publishC. TOPIC=foo GROUP=groupl PERM=view-destinationsD. ADMIN USER=user3 PERM=view-factoriesE. ADMIN user=user4 PERM=view-durable



QUESTION 103Which two statements are true about fault-tolerant pairs of EMS servers? (Choose two.)

A. Both servers need to point to each other using their ft_active parameters,B. The passive server does not need to specify an ft_active value,C. The active server sends heartbeats to the standby server,D. The standby server sends heartbeats to the active server.




QUESTION 104Which two statements are true about writing a LoginModule, which implements a JAAS interface? (Choosetwo.)

A. The LoginModule must use SSL.B. The LoginModule must accept the password from the EMS server byway of a callback.C. The LoginModule must be named JAASLoginModule.D. The LoginModule must be thread-safe.



QUESTION 105Which two statements are true about SSL support in EMS? (Choose two.)

A. When authorization is enabled, username and passwords are not checked on SSL connections.

B. Secure communications will occur between an EMS client and EMS server.C. If the producer uses SSL to connect to the EMS server, the consumer must also use SSL.D. Secure communications will occur between the Administration Tool and EMS server.



QUESTION 106Which character is valid separator in the URL for a client to connect to a fault-tolerant EMS server pair?

A. |B. .C. ;D. &




QUESTION 107Which statement is true when clients send messages to EMS servers using RELIABLE_DELIVERY mode?

A. The publish call succeeds unless a non-durable consumer is offline.B. The publish call succeeds unless the EMS server connection has terminated.C. The publish call waits for the server message indicating receipt confirmation.D. The publish call gets confirmation if the destination exists.



QUESTION 108Which two statements are true about the transactional abilities of TIBCO EMS? (Choose two.)

A. EMS can integrate with JTA compliant transaction managers.B. EMS does not support transactional consumers on routed queues.C. EMS only supports non-XA transactions.D. EMS can serve as a JTA compliant transaction manager.



QUESTION 109Which two statements are true about hops and zones in EMS? (Choose two.)

A. Zones affect queue and topic messages.B. Topic messages can be routed across multiple hops if there are no cycles.C. The concept of zones and hops applies to queue messages.D. A server can simultaneously belong to more than one zone.



QUESTION 110"Pass Any Exam. Any Time." - www.actualtests.com 44 Tibco TB0-120 ExamWhich two statements are true about EMS tracing and logging capabilities? (Choose two.)

A. The location of log file is set in tibemsd.conf file via the log_trace parameter.B. Access control violations can be logged to console or log file.C. Message tracing applies only to headers.D. Message tracing can be applied at destination and message levels.



QUESTION 111You have the following configuration, where mstore1 is of type mstore and Ssys.failsafe and$sys.nonfailsafe are file-based stores:

What happens?

A. Commands 1 and 2 fail.B. Command 1 fails, but Command 2 executes successfully.C. Command 2 fails, but Command 1 executes successfully.D. Commands 1 and 2 execute successfully.



QUESTION 112"Pass Any Exam. Any Time." - www.actualtests.com 45 Tibco TB0-120 ExamWhich Administration Tool command sets the maximum size of a queue?


A. Create queue queue.manage mbytes = value[KB|MB|GB]B. Create queue queue.manage size = value[KB|MB|GB]C. Create queue queue.manage maxbytes = value[KB|MB|GB]D. Create queue queue.manage msgm = value[KB|MB|GB]


Explanation/Reference:"Pass Any Exam. Any Time." - www.actualtests.com 46

Date post:	25-Apr-2018
Category:	Documents
Upload:	docong
View:	228 times
Download:	2 times

TIBCO.BrainDump.TB0-120.v2012-08-02.by.sindhu€¦ · TIBCO Enterprise Message ... How can the...

Documents