1 Applic ation Functions 3-position control type TC500-D.../ TC1 000-D... Electric Actuator Used in valves which stroke ≦20mm. Rating force 500N/ 1000N TC500-D...Series TC1000-D..Series TC500-X24...Series TC1000-X24...Series Datasheet No.: TC500-01 l TC500-D.../ TC1000-D... : 3-position control type l TC500-X24.../ TC1000-X24... : proportional control type l Actual force: 500N~700N/ 1000N~1200N l 24VAC/ 220VAC ±15% can be selected (only 3-position control type) l 2K resistance or SPDT feedback available (only 3-position control type) These actuators used in 2-port, 3-port valve (TF,TL,TW,...series), whose stroke is less than 23 mm . Enviroment tempreture: -10~60℃( 3-position type)/ -10~50℃( proportional type） Permissible medium temperature: -25~+130℃(water valve) / 2~+180℃( steam valve) Notes: 1. If the medium tempreature between 2~+220℃( high tempreature steam valve), 2~+450℃( super-high tempreature steam valve), the actuators bracket should be made more higher, the type should be add "G" in front o f ".12'. For example: change "TC500-D220-S.12" to ""TC500-D220-S G.12". 2. When medium temperature below 0 ℃ (R12, R22, R134a, R202, glycol), the stem of the valve should be protected by electric heating sheath to avoid frosting and icing. Voltage on terminal 1 and 2: the actuator axes extends, and valve stem retracts Voltage on terminal 1 and 3: the actuator axes retracts, and valve stem extends No voltage interminal 1,2 or 1,3: the actuator axes and valve stem keep its position
Transcript
1
Application
Functions
3-position control
type
TC500-D.../
TC1000-D...
Electric Actuator Used in valves which stroke≦20mm. Rating force 500N/ 1000N
Permissible medium temperature: -25~+130℃(water valve) / 2~+180℃(steam valve)
Notes:
1. If the medium tempreature between 2~+220℃(high tempreature steam valve), 2~+450℃(super-high tempreature
steam valve), the actuators bracket should be made more higher, the type should be add "G" in front of ".12'. For example: change "TC500-D220-S.12" to ""TC500-D220-S G.12".
2. When medium temperature below 0℃ (R12, R22, R134a, R202, glycol), the stem of the valve should be protected
by electric heating sheath to avoid frosting and icing.
Voltage on terminal 1 and 2: the actuator axes extends, and valve stem retracts
Voltage on terminal 1 and 3: the actuator axes retracts, and valve stem extends
No voltage interminal 1,2 or 1,3: the actuator axes and valve stem keep its position
2
Proportional control type
( only 24VAC )
TC500-X.../ TC1000-X...
Ordering and
Transportation
Assembly Machine TC500/TC1000...electric actuator can be fitted with 2-port, 3-port TL...,TW...,TF... series valve body .
Engineering Notes
Type Summary
Type DN[mm] PN [Mpa] Datasheet No.
2port
TL...-2V(female threaded water valve)
TL...-2S(female threaded steam valve)
TW...-2V(male threaded water valve)
TW...-2S(male threaded steam valve)
TF...-2V(flanged water valve)
TF...-2S(flanged steam valve)
15...65
15...65
25...65
25...65
15...50
1.6/ 2.5/ 4.0
1.6
1.6
1.6/ 2.5
1.6/ 2.5
1.6/ 2.5/ 4.0
1.6/ 2.5/ 4.0
TL-01
TL-01
TW-01
TW-01
TF-01
TF-01
3-port (control valve with mixing and diverting function)
TL...-3V(female threaded water valve)
TW...-3V(male threaded water valve)
TF...-3V(flanged water valve)
15...65
25...65
15...50
1.6
1.6/ 2.5
1.6/ 2.5/ 4.0
TL-01
TW-01
TF-01
When ordering,please give clear indication on quanlity, products name, type reference and any
accessories required, such as: TC500-D220-S.12.
Actuator and valve body are supplied in separate packages.
l Actuator have long service time without repair
l with limit switch function to protect motor damaged
l Manual device standard
Type Rating Force
Actual Force Operating Voltage Control Signal Manual Running speed
TC500-D24-S.12
500N
500N~700N
AC 24V
3-position
Yes
3.86s/mm (50Hz)
TC1000-D24-S.12
1000N
1000N~1200N
AC 24V
3-position
Yes
3.86s/mm (50Hz)
TC500-D220-S.12
500N
500N~700N
AC 220V
3-position
Yes
3.86s/mm (50Hz)
TC1000-D220-S.12
1000N
1000N~1200N
AC 220V
3-position
Yes
3.86s/mm (50Hz)
TC500-X24-S.12
500N
500N~700N
AC 24V
proportional
Yes
3.86s/mm (50Hz)
TC1000-X24-S.12
1000N
1000N~1200N
AC 24V
proportional
Yes
3.86s/mm (50Hz)
1. 2K feedback function can be selected when actuator is 3-position type, which must be noted when ordering, the type should be changed from"S" to "SF1". For example, change "TC500-D24-S.12" to "TC500-D24-SF1.12".
2. SPDT feedback function also can be selected when actuator is 3-position type, which must be noted when ordering, the type should be changed from"S" to "SF2". For example, change "TC500-D24-S.12" to "TC500-D24-SF2.12".
Control singal at terminal O,E increasing: the actuator axes extends, and valve stem retracts
Control singal at terminal O,E decreasing: the actuator axes retracts, and valve stem extends
Control singal at terminal no changing: the actuator axes and valve stem keep its position
Notes:
This DA mode was made before leaving factory, if RA mode needed , just put the 3rd switch of S2 from OFF to ON.
* DA mode: control singal increasing, the actuator axes retracts
RA mode: control singal increasing, the actuator axes extends
The S2 switch setting of Proportional type Actuator
S2 Switch
Function
Description
ON LOG: equal-percentage 1
Flow character OFF LIN: equal-linear
ON 20%:the starting input / output signal is 20% (namely 4~20mA or 2~10V) 2
Starting of input/ output signal OFF 0:the starting input / output signal is 0 (namely 0~20mA or 0~10V)
ON II: input current signal 3
Type of input signal OFF UI: input voltage signaL
ON IO: Output current signaL 4
Type of output signal OFF UO: Output voltage signal
ON DA:DA mode (when input signal is increasing, the actuator axes extends ) 5 Operating mode
OFF RA: RA mode (when input signal is increasing, the actuator axes retracts)
ON DW: When lose input signal (voltage type), the minimum control signal When lose input signal (current type), the minimum control signal
6 Losing input signal mode OFF UP: When lose input signal (voltage type), the maximum control signal
When lose input signal (current type), the minimum control signal
ON DF: when the actuator axes retracts to limit position,output signal will be minimum value when the actuator axes extends to limit position, output signal will be maximum value
7 Output signal
mode OFF RF: when the actuator axes extends to limit position, output signal will be minimum value when the actuator axes retract to limit position, output signal will be maximum value
ON HS: the high sensitivity of input signal ≦1.5% 8 Sensitivity
OFF LS: the low sensitivity of input signal ≦2%
The nominal setting of the S2 switch
Dimensions Mounting Orientation
Chilled/hot water valve body Steam valve body Forbidded downwards Random Orientation suitable
Input signal: 0~10VDC; Output signal: 0~10VDC; DA mode; When lose input signal (voltage type), means the minimum control signal, the actuator axes retracts.
Output signal: 4~20mA; Output signal: 4~20mA; DA mode;
When lose input signal (current type), means the minimum control signal, the actuator axes retracts.
5
Installation Sheet
Manual device operation
6
Technology Data
Power Supply
Function Parameter
Environment
Condition
Material
Weight 1.4 Kg
Electric Motor Operating Voltage TC500-D24.../ TC1000-D24... TC500-D220.../ TC1000-D220... TC500-X24.../ TC1000-X24... Frequency Power consumption TC500-D.../ TC1000-D... TC500-X24.../ TC1000-X24. Up and down dead band Sensitivity Control signal type TC500-D.../ TC1000-D... TC500-X.../ TC1000-X... Input Signal / Output Signal TC500-D.../ TC1000-D... TC500-X.../ TC1000-X... IP degree Permissible medium temperature Running <1> Enviroment tempreture: <2> Enviroment humidity: TCansportation <1> Enviroment tempreture: <2> Enviroment humidity: Stock <1> Enviroment tempreture: <2> Enviroment humidity: Cover Bracket
synchronous motor AC 24V± 15% AC 220V± 15% AC 24V± 15% 50Hz or 60Hz available 7 VA 7 VA ≦2% ≦0.8% 3-position proportional
24VAC/ 220VAC± 15% 0~10VDC, 2-10VDC, 0~20mA, 4~20mA IP54 -25~+130℃(water) 2~+180℃(steam) Notes: 1. If the medium tempreature between 2~+220℃(high tempreature steam valve), 2~+450℃(super-high tempreature
steam valve), the actuators bracket should be made more higher, the type should be add "G" in front of ".12'. For example: change "TC500-D220-S.12" to ""TC500-D220-S G.12".
2. When medium temperature below 0℃ (R12, R22, R134a, R202, glycol), the stem of the valve should be protected by electric heating sheath to avoid frosting and icing. -10~+60℃ (3-position type) -10~+50℃ (proportional type) ≦95% RH -30~+65℃ ≦95% RH -15~+50℃ ≦95% RH ABS engineering plastic aluminum die casting (surface anti-rust process) 1.4 Kg
