2
3
4
5
6 - 7
8
9
10
11
12
13
14
15
16
17
18
19
20
21 - 22
23 - 27
Contents
About Saint-Gobain Weber
Weber care
Our Brand Story
System Application
Ceramic Tile Adhesive
Porcelain Tile Adhesive
Special Application Tile Adhesive
Eco Friendly
Tile Colour Grout
Admixture
Technical Grout
Waterproofing
SKim Coat
Render and Screed
Natural Stone Impregnator & Sealers
Other Product
Tile Fixing factor
Adhesive Selector
Weber Project Reference
3 3
Saint-Gobain Weber Malaysia Saint-Gobain Weber (M) Sdn. Bhd. (formerly known as Manewtech-Belle Sdn. Bhd.) was established in 1987 and became part of the Saint-Gobain Group in 2007; when it was acquired by Saint-Gobain. Since then, the company has drawn on the global support and resources of Saint-Gobain Weber to achieve great strides in developing its range of quality product offerings and services to the local market; and to established itself as one of the leaders in Tile Fixing Solution. Saint-Gobain Weber (M) Sdn. Bhd. had a track record of 30 years in the manufacturing of Tile Fixing Solution and currently serves the market through its fully automated manufacturing facility in PuncakAlam, Selangor.
In the year 2017 Saint-Gobain Weber acquired E.Mix, a leader in Plaster & Mortar Solution in South-East Asia to accelerate its Industrial Mortar business in Malaysia; and regionally. With the acquisition of E.Mix, Saint-Gobain Weber (M) Sdn. Bhd. has thus improved its competitive edge and geographical positioning and reached with 3 additional manufacturing facility strategically located at Beranang (Selangor), Bemban (Perak) and Seelong (Johor); to better serve the local market. E.Mix is a leading brand in Plaster & Mortar technology with a proven track record of 34 years and still growing; since it was established in 1984. E.Mix is one of the country’s pioneer in Industrial Mortar manufacturing and is proudly deemed as the market leader that produce excellent and conformable premixed Plaster & Mortar Solutions.
The integrated annual capacity of these 4 manufacturing facility in Malaysia is approx. 440,000 tons making Saint-Gobain Weber (M) Sdn. Bhd. the largest manufacturer of Industrial Mortar in Malaysia. As the country’s manufacturing leader of Industrial Mortars, our manufacturing facilities are equipped with automated system that ensure that the manufacturing process are systematically monitored and controlled to precision; thus ensuring the consistency of products at all times. All manufacturing facility is equipped with stringent QA/QC and R&D facilities that not only ensure a high level of product quality consistency; but to consistently deliver Innovative Solution to the local market that is continually evolving.
About Weber
Well-being
Long-lasting
Empathy
At Weber, we care for the well-being of people whether they use our products or live in the buildings made using our products. Our solutions and services aim at making our customers save
At Weber, we care about what matters to people. We have a strong knowledge of our customers’ job, in order to better answer their needs and help them to be successful and trustworthy. Beyond performance and reliability, we provide training and assistance in order to make every work a success.
At Weber, we care about our long-term responsibility. As we operate in the construction industry, our solutions are conceived to last. Our products and components are carefully chosen to care for the health and safety of people.
4 4
We care about people and their environment.
As the world leader inindustrial mortars, with some 10,000 people in 58 countries, Weber can quickly tap into a very rich source of knowledge all over the world. This allows us to develop better and quicker solutions for ourcustomers, wherever theyare, by combining a deeplocal knowledge withinternational experience.
Weber is theworldwide leader in mortar-based
solutions.
200 production units
turnover > 2 billion € / annum
58 countries
10.000 people
System Application
1 - weberfill fine grout + webermix GT-mix I2 - weberset super star + webermix Admix I3 - E.MIX Easi Render 094 - webermix SBR + cement5 - weberdry WP 300-E6 - Pool shell
BONDING AGENT
6 6
8 8
* Bed thickness, tile fixing area, coverage,substrate please refer to Product Selector page 21
Ceramic Tile Adhesive
weberset super starCeramic tile adhesive forinternal & external areas
• Premium grade C1 Tile Adhesive• Excellent bond strength/ ( 1.0 - 1.2 N/mm² )• Easy to mix & apply• Contains 100% Silica sand filler• Ideal for swimming pool & wet area• 20kg bag
APPLICATIONDEPTH
for useup to 6 mm
FOR WET& DRY AREA DURABILITY
24H
SET TIME
APPLICATIONDEPTH
for useup to 6 mm 24H
SET TIME
APPLICATIONDEPTH
for useup to 6 mm
FOR WET& DRY AREA DURABILITY
24H
SET TIME
weberset easy bondCeramic tile adhesive fornormal tiling
• Good quality C1 Tile Adhesive• Good bond strength ( 0.5 - 0.7 N/mm² )• Easy to apply with good workability• Good for Porous Ceramic Tiles• 25kg bag
ECONOMIC
Ensure that the Render & Screed is aged accordinglybetween 2-3 weeksCeramic Tiles are group of tiles with water absorptionbetween 3-10%.When fixing with Ceramic Tile, do not soakCeramic Tile in Water prior to fixing. Ceramic Tile adhesive is suitable for fixingCeramic Tiles onto Cement Sand Render & Screed only.When Fixing Ceramic Tile onto Render or Screed,Ceramic Tile Adhesive is mix with Clean Water only.However, when fixing Porcelain Tiles, Ceramic TileAdhesive must be mixed with Latex Admixture
1.
2.
3.
4.
5.
6.
GOOD PRACTICE FOR USINGCERAMIC TILE ADHESIVE
weberset CTF greyCeramic tile adhesive forwall & floor
• High quality C1 Tile Adhesive• Very good bond strength ( 0.7 - 0.9 N/mm² )• Easy to mix & apply• Best for Porous Ceramic Tiles• 25kg bag
* Bed thickness, tile fixing area, coverage,substrate please refer to Product Selector page 21
Porcelain Tile Adhesive
weberset one fixTile adhesive for large PorcelainTiles on floor
• High quality C2E Tile Adhesive• Very good bond strength ( 1.4 - 1.7 N/mm² )• Specially for large & heavy floor tile, no sinking of floor tile• Easy to use• 25kg bag
Ensure that substrate is aged appropriately ie. Concrete (4-6wks), Render (2-3 wks)Select suitable Porcelain Tile adhesive for different purposes ie. weberset one fix for large Porcelain Tiles on floor orweberset superflex 21 for large Porcelain Tiles on wallUse two operation of - trowel & butter especially when fixing large format Porcelain TileAllocate appropriate tile joint between 3-6mmProtect completed tile for 24-48 hoursMaintain good air Ventilation in completed units
1. 2.
3.4.5.6.
GOOD PRACTICE FOR USING PORCELAIN TILE ADHESIVE
APPLICATIONDEPTH
for useup to 15 mm
VOC
LOW VOC FLEXIBLE
weberset easy flex Tile adhesive For Porcelain Tiles
• Good quality C2TE Tile Adhesive• Good bond strength ( 1.4 - 1.7 N/mm² )• Easy to use• Applicable for wall & floor• 25kg bag
APPLICATIONDEPTH
for useup to 6 mm
DURABILITY ECONOMIC
APPLICATIONDEPTH
for useup to 6 mm
DURABILITY ECONOMIC
VOC
LOW VOCAPPLICATIONDEPTH
for useup to 6 mm
VOC
LOW VOC
weberset superflex 21Tile adhesive for large PorcelainTiles on wall & floor
• Premium grade C2TE Tile Adhesive• Excellent bond strength ( 1.6 - 1.9 N/mm² )• Easy to mix & apply• Low Wall Tile Slippage• 25kg bag
FLEXIBLE INTERNALFLOOR & WALL
weberset easy fix 101Porcelain tile adhesive fornormal tiling
• Good quality C2 Tile Adhesive• Good bond strength ( 1.2 - 1.5 N/mm² )• Easy to apply with good workability• Applicable for wall and floor• 25kg bag
Special Application Tile Adhesive
weberset quickfix Fast setting tile adhesive
• Fast setting time : 2-4 hours• Premium Grade C1F Tile Adhesive• Good for Fast Track Jobs• Best for Compressed Marbles• Heat & Sulphate Resistance• 20kg bag
weberfix supergrip Ready-To-Use Adhesive forceramic wall tile
• Easy to apply• No Mixing Required• Water Resistant• No messy job site• 7.5, 15, 25kg drum
24H
SET TIMEFOR WET& DRY AREA
INTERIOREXTERIOR
APPLICABLE ONGYPSUM BOARD
INTERNAL WALLONLY
RAPID SETFOR WET
& DRY AREAWALL & FLOOR ADHESIVECOVERAGE FORMULA
ADHESIVE COVERAGE SCHEDULE
3mm
6mm
12mm
1m2
1m2
1m2
3kg
6kg
12kg
Trowel Bed Thickness Area in msq Consumption
ie - How much coverage adhesive per bagof 25kg on 10mm trowel thickness
1) 10mm = 10kg = 1m2
2) 25kg per bag 10kg3) 2.5msq per 25kg bag
.
.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
VOC
LOW VOC HIGH GRAB MAXIMALFLEXIBILITY
weberset x’tra flex Flexible and improved adhesivefor Porcelain tile
• Premium Grade C2TES1 Tile Adhesive• Excellent bond strength ( 1.8 - 2.1 N/mm² )• Good Flexibility (Deformable)• Specially for large format wall tile due to low Wall slippage• Longer open time • 25kg bag
APPLICATIONDEPTH
for useup to 6 mm
* Bed thickness, tile fixing area, coverage,substrate please refer to Product Selector page 21
Special Application Tile Adhesive
weberset epoxy adhesive Two part epoxy adhesive for Tiles
• Water Impervious & Chemicals Resistant Tile Adhesive• Two Component• Excellent Bond Strength• Ideal for commercial kitchen, hospital, factory floors etc.• 8kg drum
weberset CTF white White adhesive for Tiles& Mosaics
• Premium grade C1 tile adhesive• Best to fix Translucent Tiles or Stone Slabs.• High bond strength ( 0.7 - 0.9 N/mm² )• Specially for translucent mosaic• 20kg bag
24H
SET TIMEWHITEINTERIOREXTERIOR
APPLICATIONDEPTH
for useup to 6 mm
Eco Friendly & Comfort Series
weberset x’tra flex (LD) Low Dust flexible and improvedadhesive for porcelain tile
• Premium Grade C2TES1 Tile Adhesive with Low Dust• Good Flexibility (Deformable)• Excellent Bond Strength ( 1.8 - 2.1 N/mm² )• Specially for large format wall tile due to low wall tile slippage• 25kg bag
weberset super star (LD) Low Dust ceramic tile adhesivefor internal & external areas
• Premium Grade C1 Tile Adhesive with Low Dust• High bond strength ( 1.0 - 1.2 N/mm² )• Best for interior & exterior when use with admixtures• Easy to use• 20kg bag
MAXIMALFLEXIBILITYLOW DUST
INTERIOREXTERIOR
ENVIRONMENTALLYFRIENDLY LOW DUST
INTERIOREXTERIOR
FOR WET& DRY AREA
24H
SET TIME
ECO FACTS :
weberset eco flexEco-Friendly improved adhesivefor porcelain tile
• Premium Grade C2S1 Tile Adhesive• Use 20% recycle materials as replacement of OPC• Good Flexibility (Deformable)• Excellent bond strength ( 1.8 - 2.1 N/mm2 )• Green binder technology• 25kg bag
APPLICATIONDEPTH
for useup to 12 mm
BIG FORMATTILE
ENVIRONMENTALLYFRIENDLY
MAXIMALFLEXIBILITY
weberset eco fixEco-Friendly adhesive forceramic tile
• Premium grade C1 Tile Adhesive• Use 20% recycle materials as replacement of OPC• High bond strength ( 1.0 - 1.2 N/mm² )• Green binder technology• 25kg bag
APPLICATIONDEPTH
for useup to 12 mm
FOR WET& DRY AREA
ENVIRONMENTALLYFRIENDLY
weberset eco fix & eco flex are the only tile adhesive using an eco-binder technology.Both products use recycled content materials ie. Slag more than 20% from the total formulationWeber Low Dust Tile Adhesive reduce dust particles up to 90% compared to normal tile adhesive.
1.
2.
3.
weber low dusttile adhesive
normal tile adhesive
weberfill crystal groutAnti-fungus & stain resistanttile grout
• Suitable for joints up to 8mm wide• Water repellant tile grout• Stain resistant• Durable yet semi flexible• Long lasting & enhanced color• Approximately 0.27kg per m² based on 300 x 300 x 8mm tile at 3mm joint width• 1 & 20kg bag
weberfill epoxy groutChemical resistant & water imperviousepoxy grout
• Water impervious tile grout• Chemicals Resistant• Best for heavy duty areas• Suitable for joint up to 6mm wide• Approximately 0.34kg per m² based on 200 x 200 x 8mm tile at 3mm joint width• 1 & 5kg
MOULDRESISTANT
EASYTO CLEAN
LONG LIFECOLOR
WATERRESISTANT
CHEMICALRESISTANT
ANTIBACTERIAL
weberfill ultra plus groutAnti-bacterial and anti-fungustile grout
• Anti-bacteria tile grout• Easy to apply• Suitable for joint from 2 - 3mm wide• Long lasting & enhanced color• Approximately 0.27kg per m² based on 300 x 300 x 8mm tile at 3mm joint width• 1 & 20kg bag
FOR WET& DRY AREA
MOULDRESISTANT
INTERNAL & EXTERNALFLOOR & WALL
weberfill fine groutTile grout for narrowtile joint
• Joint up to 3mm wide• Wide range of colors• Water resistant• Durable & compressible• Approximately 0.24kg per m² based on 200 x 200 x 7mm tiles with 2mm joints• 1, 3.5 & 20kg bag
UP TO 3 MM
JOINTWIDTHENVIRONMENTALLY
FRIENDLY
12 MM
JOINTWIDTH
weberfill F&W groutTile grout for wide tile joint
• Wide joint from 3 - 12 mm joint width• Wide range of colors• Water resistant• Approximately 0.27kg per m² based on 300 x 300 x 8mm tile at 3mm joint width• 20kg bag
FOR WET& DRY AREA
INTERNAL & EXTERNALFLOOR & WALL
TILE GROUT APPLICATION :
Allow adhesive bed to set 24 hours before grouting commences.•Ensure that joints are dry, clean or free ofcontaminants.Mix Weber tile grout with clean water (or webermix GT mix I) as per the recommended mix ratioApply grout into joints using a grout float/rubber squeegee.Clean excess or residue grout promptly using a damp cloth or sponge;before it dries out.When grout is sufficiently firm, polish tile surface witha clean dry cloth to remove grout film / haze.Allow grout to set for 24-48 hours
1.
2.
3.
4.
5.
6.
Tile Grout
webermix GT mix ILatex admixture for tile grout
• Increase durability greater adhesion to difficult surface, reduce water permeability & increased flexural strength• Approximately 6ltrs per 20kg bag for coarse Grout (mixing ratio)• Approximately 8ltrs per 25kg bags for Fine Grout (mixing ratio)• 1, 4, 25ltr
webermix multibondGeneral purpose latex admixture
• Reduce water to cement ratio for mortar• improved cohesive strength • Reduced hydraulic shrinkage of mortar• Approximately 5ltrs per 200kg of cement sand mix• 4, 25ltr
webermix Admix IPremium grade latex admixturefor tile adhesive
• Recommended for swimming pool and external wet area• High Solid content• Improved bonding strength• Improved flexural strength• Approximately 6 - 8ltrs per 20 - 25kg bags (mixing ratio)• 4, 25ltr
webermix Admix PlusLatex admixture for tile adhesiveand tile grout
• High Solid content• Good adhesion strength• Reduced water permeability• Approximately 6 - 8ltrs per 20 - 25kg bags (mixing ratio)• 4, 20, 25ltr
webermix SBRPremium grade general purposelatex admixture
• Act as a good slurry bonding agent• Improved compressive strength of mortar• Reduces water permeability of mortar• Act as a rust prevention for steel surface• Approximately 5ltrs per 200kg of cement sand mix• Approximately 1:15 liquid to OPC ratio for slurry bond coat• 1, 4, 25ltrs
Admixture
webermix eco mix IEco friendly latex admixture for tileadhesive and coloured grout
• Low VOC Level• Certified to Singapore Green Label• Improved bonding & flexural strength• Approximately 6-8ltrs per 20-25kg bags (mixing ratio)• 4, 25ltr
webertec NSG 123multi-purpose high strength, flowable,shrinkage compensated grout
• Expansion system compensates for shrinkage• Suitable for dry pack, plastic & flowable consistency • 25kg bag• Compressive Strength @ 28 days > 50 Mpa
webertec NSG 124High strength, high flowability,shrinkage compensated grout
• Able to withstand dynamic loading & Vibration• Durability • Suitable for dry pack, plastic & flowable consistency• Suitable for high pressure grouting (pumpable)• 25kg bag• Compressive Strength @ 28 days > 70 mpa
Non-Shrink Grout
EASYTO APPLYECONOMIC DURABILITY RESISTANT
NON-SCHRINKGROUT
NON-SCHRINKGROUT
• The substrate should be clean and sound. Free from any contamination including oil, grease, laitance and dust. For maximum bonding, the surface should be roughened and pre-soak with clean water.
• Immediately prior to grouting, remove free water.• Metal surface must be free from rust, scale, oil or grease but removal metal shims
should be lightly oiled.• Ensure voids and cavities are free from dust, water or any loose materials.
Formwork should be well sealed to prevent leakage.
webertec NSG 123
CompessiveStrength Day
Products
1 Day > 20 N/mm² > 25 N/mm² 7 Day > 40 N/mm² > 55 N/mm² 21 Day > 50 N/mm² > 70 N/mm²
webertec NSG 124
weberdry WP 100-SFTwo-component,semi-flexible cementitiouswaterproofing slurry
• Slurry consistency• Pre-mixed component• Water absorption rate of 28 days : ≈ 0.20%• 20kg bag & 5Ltr
weberdry WP 300-E weberdry WPC coatingTwo-component,elastomeric cementitiouswaterproofing slurry
• Excellent crack bridging capability• Good workability• Elongation at break @ 200%• Water absorption rate of 28 days : ≈ 0.04%• 25kg bag & 18Ltr
• Ready to use, no mixing required
weberdry WP 200-FTwo-component, flexiblecementitiouswaterproofing slurry
EASYTO APPLY
EASYTO APPLYECONOMIC FLEXIBLE IMPERMEABILITY
EASYTO APPLYELASTOMERIC IMPERMEABILITY
• Concrete, Cement-Sand Render / Screed & Masonry surface must be well age, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area. This is particularly important if substrate exhibits a high degree of water suction. Rapid loss of moisture from the waterproof coating may result in pinholes, poor adhesion and overall weakened properties.
Treatment to outlet2 layers weberWaterproofing Series
Tile Finishes
Easi Screed
ConcreteSlab
Angle Fillet
2 layers: weberdry WP Seriescementitious based waterproofing
Plastering by E.MIX Render Series
Skirting: 300 mm HighShower Wall: 1600 mm High
Weber tile adhesive
RC/Brickwall
1600
mm
• Impermeable & good workability• Pre-mixed component• Water absorption rate of 28 days : ≈ 0.10%• 25kg bag & 9Ltr
SKim Coat
E.MIX FinishFine finishing skim coat forwall and ceiling
• Good workability• Internal area only• 1 – 2mm / coat• 25kg bag• White / Grey
E.MIX Eco FinishEco-friendly fine finishingskim coat for wall and ceiling
• Singapore Green label Certified• Good workability• Internal area only• 1 – 2mm / coat• 25kg bag• White / Grey
Tools for Skim Coat Application• Square trowel• Bucket trowel• Hawk• Float• Spirit Level
E.MIX Easi Plaster 11Polymer-based plaster forwall and ceiling
• Good workability• Smooth finishing• Internal & external area• 1 – 2mm / coat• 40kg bag• White / Grey
E.MIX Easi BaseBase skim coat for walland ceiling
• Easy to mix• Interior area only• 2 – 5mm / coat• 40kg bag• White / Grey
E.MIX Eco BaseEco-friendly base skim coat forwall and ceiling
• Singapore Green Label Certified• Easy to mix• Interior area only• 2 – 5mm / coat• 40kg bag• White / Grey
Render and Screed
E.MIX Block PlasterPremixed cement-basedplaster for AAC Block
• Good workability• Good water resistance• Coarse finishing• 4 – 6 mm / coat• 40kg bag• Grey
E.MIX Easi Render 09Premixed cement-basedrender for brick, block &fairface concrete walls
• Good workability• Good water resistance• Coarse finishing• 5 – 15 mm / coat• 40kg bag
E.MIX Eco RenderEco-friendly premixedcement-based render forbrick, block & concrete walls
• Good workability• Good water resistance• Coarse finishing• 5 – 15 mm / coat• 40kg bag
E.MIX Thick Render 06Premixed cement-basedrender for brick, block &fairface concrete walls
• Good workability• Easy to mix• Coarse finishing• 10 – 25 mm / coat• 40kg bag
E.MIX ALC RenderPremixed cement-basedrender for internal & externalAAC Block walls
• Good workability• Good water resistance• Coarse finishing• 5 – 15 mm / coat• 40kg bag
E.MIX Easi ScreedPremixed cement-basedmortar for levelling of concretefloor and repair of screeding
• Good workability• Easy to mix• Good compressive strength: >20 N/mm2• 5 – 50 mm / coat• 40kg bag
GOOD PRACTICE OF SUBSTRATEPREPARATION
1. Ensure substrate is clean and solid. Remove loose particles, grease and traces of foreign materials that may affect adhesion.
2. On dry absorbent substrate, the surface is moistened if necessary.
3. On concrete surfaces, it is recommended that a spatterdash coat be applied to the receiving substrate to provide better key for the render layer.
SpatterdashBefore RenderApplication
weberprim super sealReady to use sealer for gloss finish
• Provide high water resistant properties• Enhance surface with gloss finish suitable for wet or dry, interior & exterior areas• Application for top surface only.• Approximately 4-5ltr per 100m² when applied onto a moderate water absorption surface• Setting Time = 24 hour• 1, 5, 20ltr
weberprim aqua seal Water repellent treatment fornatural stone slabs
• Water repellent protection• Application for top, edge & bottom surface• Creates an easy cleaning surface• Approximately 3-5ltr per 100m² when applied onto a moderate water absorption surface• Setting Time = 24 hour• 1, 5, 20ltr
Natural Stone Impregnator & Sealers
weberprim pro seal IWater and oil repellent treatmentfor natural stone slabs
• Water & oil repellent protection• Application for top, edge & bottom surface• Creates an easy cleaning surface• Approximately 8-12ltr per 100m² when apply onto a moderate water absorption surface• Setting Time = 24 hour• 1, 5, 20ltr
weberprim hydro sealWater repellent treatment fornatural stone slabs
• Water repellant protection• Application for bottom & edge surface only• Prevents water ingress from below• Approximately 3-5ltr per 100m² when apply onto a moderate water absorption surface• Setting Time = 24 hour• 1, 5, 20ltr
weberprim hydro seal
weberprim aqua seal
weberprim super seal
weberprim pro seal Iweberprim hydro seal
Application of silicone impregnator ongranite slabsApplication of silicone impregnator ongranite slabs
weberprim aqua seal
weberprim super seal
weberprim pro seal I
1, 4, 25ltr
&
Other Product
E.MIX Masonry Mortar GPGeneral purpose premixedmortar for joints of masonrywalls
• Specially made as replacement of site mixing• Compatible to various bricks and blocks• 40kg bag
E.MIX ALC Thin MortarCement-basedpremixed mortar for thinjointing of AAC Blocks
• Fire resistance of over 260 minutes at 1,300 °C • Thin layer application• 40kg bag
E.MIX Masonry Mortar SPGeneral purpose premixedmortar for joints of loadbearingmasonry walls
• Shrinkage compensated to reduce shrinkage cracks• Compatible to various bricks and blocks• 40kg bag
Tile Fixing factor
Water absorption (E)
A ExtrudedB Dry-pressed
Group 11b
A11bB11b
< 10%6% <
Group 11a
A11aB11a
6%5% < <
Group 1b
A1aB1a
3%0.5% < <
Group 1a
A1aB1a
0.5%<
Group 111
A111B111
< 10%
Tile Classification Based On Iso-13007
TYPE OF SUBSTRATE PREPARATION
Must be level, in sound condition and of good cohesive strength. Install tiles with Weber Ceramic Tile Adhesive mixed with LatexAdmixture.
Building Boards such as plywood, cement-fibre board, chipboard etc. must be adequately braced to provide a sound / rigidsubstrate. Prime surface with Webermix SBR, before direct fixing with Weber Ceramic Tile Adhesive mixed with Latex Admixture.
It must be strong, rigid & strenghened by overlaying it with a 12 mm thick marine plywood, screw fixed at 300 mm centers to thejoists. Installation system for tiles, similar to “Building Boards”
Existing surface must be dry, sound & free of contaminants. Hollow sections should be removed and made good before directfixing with Weber Ceramic Tile Adhesive mixed with Latex Admixture.
Existing Vinyl Tile surface must be dry, sound & free of contaminants. Prime surface with Webermix SBR, before direct fixing withWeber Ceramic Tile Adhesive mixed with Latex Admixture.
Allow new cement-sand render or screed to cure for 2 - 3 weeks, before fixing tiles. The rendering or screeding mortar mix shouldideally be 1 part cemet : 3 - 4 parts of sand by volume.
Must be aged for 4 weeks and leveled with Cement-Sand Mortar (ie. weberwall AAC render) prior to fixing tiles. Direct tiling onflat surface can be conducted using proper adhesive solution. Prime Surface of AAC Blocks with weberprim AAC primer.
Must be aged for 4 weeks and leveled with Cement-Sand Mortar (Render) prior to fixing tiles. Direct fixing onto BlockWall is not recommended.
Must be aged for 6 weeks. Direct fixing onto concrete may be taken provided the surface is flat or true, well cured andfree of contamination. Surface primer may be required for direct fixing.
Must be age for 4 weeks and leveled with Cement-Sand Mortar (Render) prior of fixing tiles.
Concrete
Brick Wall
Lightweight Concrete Blocks
Aerated Autodaved Concrete Blocks (AAC)
Cement-Sand Render & Screed
Existing Tiles / Marbles / Terrazzo
Existing Vinyl Tiles
Building Boards
Timber Floors
Asphalt
20 20
Types of tile PorcelainHomogeneous Tile Porous / Ceramic Tile
Group 1a - Low water absorption Tile / Porcelain Homogeneous
Group 1b,11a,11b- Porous Tile / Ceramic Tile
Extruded : Tiles are formed by a process in which the wet clay or plastic raw material is forced through a mold and then cut into shapebefore firing. Dry-pressed : The clay is pressed or formed into a tile shape.
web
erse
t su
per
star
web
erse
t CTF
gr
eyw
eber
set e
asy
bond
web
erse
t eas
y fix
101
web
erse
t eas
y fle
xw
eber
set
one fix
web
erse
t su
perfl
ex 2
1w
eber
set C
TF
whi
tew
eber
set
quic
k fix
web
erse
tx'
tra fle
x
web
erse
t ep
oxi
adhe
sive
web
erfix
su
perg
rip
web
erse
tec
o-fix
web
erse
tec
o fle
xw
eber
set
supe
r sta
r (LD
)w
eber
set
x'tr
a fle
x (L
D)
Clas
sific
ation
C1C1
C1C2
C2 T
EC2
EC2
TE
C1C1
FC2
TE
S1R
DC1
C2 S
1C1
C2 T
E S1
Setti
ng T
ime
24 h
ours
24 h
ours
24 h
ours
24 h
ours
24 h
ours
24 h
ours
24 h
ours
24 h
ours
2 - 4
hou
rs24
hou
rs24
hou
rs48
- 72
hou
rs24
hou
rs24
hou
rs24
hou
rs24
hou
rs
Bed
Thi
ckne
ss3
- 6m
m3
- 6m
m3
- 6m
m3
- 6m
m3
- 6m
m6
- 15m
m3
- 6m
m3
- 6m
m3
- 6m
m3
- 6m
m2
- 5m
m3m
m3
- 6m
m3
- 6m
m3
- 6m
m3
- 6m
m
Ope
n Ti
me
15 m
inut
es15
min
utes
15 m
inut
es15
min
utes
15 m
inut
es30
min
utes
20 m
inut
es15
min
utes
15 m
inut
es30
min
utes
15 m
inut
es15
min
utes
15 m
inut
es15
min
utes
15 m
inut
es30
min
utes
Pot L
ife2
- 3 h
ours
2 - 3
hou
rs2
- 3 h
ours
2 - 3
hou
rs2
- 3 h
ours
2 ho
urs
2 - 3
hou
rs2
- 3 h
ours
30 m
inut
es2
hour
s45
min
utes
N/A
2 - 3
hou
rs2
- 3 h
ours
2 - 3
hou
rs2
hour
s
Colo
urG
rey
Gre
yG
rey
Gre
yG
rey
Gre
yG
rey/
Whi
teW
hite
Gre
yG
rey/
Whi
teIv
ory
Off
-Whi
teG
rey
Gre
yG
rey
Gre
y
Mov
emen
t Res
ista
ntA
vera
geA
vera
geA
vera
geG
ood
Goo
dG
ood
Goo
dA
vera
geA
vera
geVe
ry G
ood
Poor
Goo
dA
vera
geVe
ry G
ood
Ave
rage
Very
Goo
d
Gre
en L
abel
No
No
No
No
Yes
No
Yes
No
No
Yes
No
No
Yes
Yes
No
No
Low
Dus
tN
oN
oN
oN
oN
oN
oN
oN
oN
oN
oN
oN
oN
oN
oYe
sYe
s
3mm
Tro
wel
Bed
Thi
ckne
ss6.
6m²/
20kg
8.0m
²/25
kg8.
0m²/
25kg
8.0m
²/25
kg8.
0m²/
25kg
8.0m
²/25
kg8.
0m²/
25kg
6.6m
²/20
kg6.
6m²/
20kg
8.0m
²/25
kg2.
7m²/
8kg
5.0m
²/15
kg8.
0m²/
25kg
8.0m
²/25
kg6.
6m²/
20kg
8.0m
²/25
kg
3 - 6
mm
Tro
wel
Bed
Thi
ckne
ss4.
5m²/
20kg
5.5m
²/25
kg5.
5m²/
25kg
5.5m
²/25
kg5.
5m²/
25kg
5.5m
²/25
kg5.
5m²/
25kg
4.5m
²/20
kg4.
5m²/
20kg
5.5m
²/25
kg1.
7m²/
8kg
3.3m
²/15
kg5.
5m²/
25kg
5.5m
²/25
kg4.
5m²/
20kg
5.5m
²/25
kg
6mm
Tro
wel
Bed
Thi
ckne
ss3.
5m²/
20kg
4.2m
²/25
kg4.
2m²/
25kg
4.2m
²/25
kg4.
2m²/
25kg
4.2m
²/25
kg4.
2m²/
25kg
3.5m
²/20
kg3.
5m²/
20kg
4.2m
²/25
kg1.
3m²/
8kg
2.5m
²/15
kg4.
2m²/
25kg
4.2m
²/25
kg3.
5m²/
20kg
4.2m
²/25
kg
9mm
Tro
wel
Bed
Thi
ckne
ss2.
2m²/
20kg
2.8m
²/25
kg2.
8m²/
25kg
2.8m
²/25
kg2.
8m²/
25kg
2.8m
²/25
kg2.
8m²/
25kg
2.2m
²/20
kg2.
2m²/
20kg
2.8m
²/25
kgN
/AN
/A2.
8m²/
25kg
2.8m
²/25
kg2.
2m²/
20kg
2.8m
²/25
kg
12m
m T
row
el B
ed T
hick
ness
1.7m
²/20
kg2.
1m²/
25kg
2.1m
²/25
kg2.
1m²/
25kg
2.1m
²/25
kg2.
1m²/
25kg
2.1m
²/25
kg1.
7m²/
20kg
1.7m
²/20
kg2.
1m²/
25kg
N/A
N/A
2.1m
²/25
kg2.
1m²/
25kg
1.7m
²/20
kg2.
1m²/
25kg
Wal
l●
●●
●●
N/A
●●
●●
●●
●●
●●
Floo
r●
●●
●●
●●
●●
●●
N/A
●●
●●
Inte
rnal
Dry
●●
●●
●●
●●
●●
●●
●●
●●
Inte
rnal
Inte
rmitt
ent W
et●
●●
●●
●●
●●
●●
●●
●●
●
Inte
rnal
Wet
●●
●●
●●
●●
●●
●N
/A●
●●
●
Exte
rnal
● (1
)●
(1)
● (1
)●
(1)
● (1
)●
(1)
● (1
)●
(1)
● (1
)●
(1)
N/A
N/A
● (1
)●
(1)
● (1
)●
(1)
Swim
min
g Po
ol●
(1)
● (1
)●
(1)
● (1
)●
(1)
● (1
)●
(1)
● (1
)●
(1)
● (1
)●
N/A
● (1
)●
(1)
● (1
)●
(1)
Bri
ck W
all
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
edN
/AM
ust
be
rend
ered
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
ed
Hol
low
Blo
ck w
all
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
edN
/AM
ust
be
rend
ered
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
edM
ust
be
rend
ered
Mus
t be
re
nder
ed
AA
C B
lock
Wal
l●
(1) &
(3)
● (1
) & (3
)●
(1) &
(3)
● (3
)●
(3)
N/A
● (3
)●
(1) &
(3)
● (1
) & (3
)●
(3)
● (3
)●
(3)
● (1
) & (3
)●
(3)
● (1
) & (3
)●
(3)
Pre-
Fab
Conc
rete
Wal
l●
(1)
● (1
)●
(1)
●●
N/A
●●
(1)
● (1
)●
●N
/A●
(1)
●●
(1)
●
Conc
rete
Wal
l/Fl
oor
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Mus
t be
re
nder
ed /
sc
reed
ed
Skim
Coa
t Pla
ster
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
eN
/AN
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
e
Cem
ent-
Sand
Ren
der
●●
●●
●N
/A●
●●
●●
●●
●●
●
Cem
ent-
Sand
Scr
eed
●●
●●
●●
●●
●●
●N
/A●
●●
●
Pain
ted
Wal
ls●
(1) M
ust
be
keye
d●
(1) M
ust
be
keye
d●
(1) M
ust
be
keye
d●
Mus
t be
key
ed●
Mus
t be
key
edN
/A●
Mus
t be
key
ed●
(1) M
ust
be
keye
d●
(1) M
ust
be
keye
d●
Mus
t be
key
ed●
Mus
t be
key
ed●
Mus
t be
key
ed●
(1) M
ust
be
keye
d●
Mus
t be
key
ed●
(1) M
ust
be
keye
d●
Mus
t be
key
ed
Existi
ng T
ile /
Mar
ble
/ Te
rraz
zo e
tc.
● (1
)●
(1)
● (1
)●
(1)
● (1
)●
(1)
● (1
)●
(1)
● (1
)●
(1)
●N
/A●
(1)
● (1
)●
(1)
● (1
)
Existi
ng V
inyl
Tile
s●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(2)
N/A
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
Cem
ent-
Fibe
r B
oard
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)N
/A●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)N
/A●
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
Plyw
ood,
Chi
pboa
rd e
tc.
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)N
/A●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)N
/A●
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
Gyp
sum
Pla
ster
Boa
rd●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
N/A
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
N/A
● (2
)●
(1) &
(2)
● (1
) & (2
)●
(1) &
(2)
● (1
) & (2
)
Stee
l / M
etal
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
●N
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
Not
Sui
tabl
eN
ot S
uita
ble
Tong
ue &
Gro
ove
Tim
berb
oard
s●
(1) &
(2) -
O
verl
ay w
ith
Bldg
. Boa
rd
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
N/A
N/A
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
● (1
) & (2
) -
Ove
rlay
wit
h Bl
dg. B
oard
Cera
mic
Wal
l & F
loor
Tile
s●
●●
●●
● (F
loor
)●
●●
●●
● (W
all)
●●
●●
Cera
mic
Mos
aics
●●
●●
●N
/A●
●●
●●
● (W
all)
●●
●●
Vit
reou
s /
Gla
ss M
osai
cs●
(1)
● (1
)●
(1)
●●
N/A
●●
(1)
● (1
)●
●N
/A●
(1)
●●
(1)
●
Porc
elai
n /
Hom
ogen
eous
Tile
s●
(1)
● (1
)●
(1)
●●
● (F
loor
)●
● (1
)●
(1)
●●
N/A
● (1
)●
● (1
)●
Qua
rry
/ Te
rrac
otta
Tile
s●
●●
●●
● (F
loor
)●
●●
●●
N/A
●●
●●
Mar
ble
/ G
rani
te S
labs
● (1
)●
(1)
● (1
)●
●●
(Flo
or)
●●
(1)
● (1
)●
●N
/A●
(1)
●●
(1)
●
Slat
es /
San
dsto
nes
●●
●●
●●
(Flo
or)
●●
●●
●N
/A●
●●
●
Usa
ge &
Ser
vice
Co
nditi
on
Subs
trat
es
Type
Of T
iles
or
Ston
e Sl
abs
Prop
erti
es
Porc
elai
n Ti
le A
dhes
ive
Spec
ial C
onditi
on T
ile A
dhes
ive
Eco-
Frie
ndly
& C
omfo
rt S
erie
s Ti
le A
dhes
ive
Cove
rage
Type
s O
f Adh
esiv
e
Para
met
ers
Cera
mic
Tile
Adh
esiv
e
21 21
Adhesive SelectorW
EBER
PR
OD
UC
T S
ELEC
TO
R : (1) :
Use
with
web
erm
ix A
dmix
I /
web
erm
ix A
dmix
plu
s (2
) : P
rim
e w
ith w
eber
mix
SBR
(3)
: Pr
ime
with
Web
erpr
im A
AC
Pri
mer
●
2222
Skim Coat Series
E.MIX Finish E.MIX Eco Finish
E.MIX Easi Plaster 11
E.MIX Easi Base
E.MIX Eco Base
Coat Thickness 1 – 2mm 1 – 2mm 1 – 2mm 2 – 5mm 2 – 5mm Pot Life 3 Hours 3 Hours 2 Hours 3 Hours 2 Hours Colour Grey / White Grey / White Grey Grey / White Grey / White Consumption 1.2kg/m2/mm 1.1kg/m2/mm 1.2kg/m2/mm 1.4kg/m2/mm 1.5kg/m2/mm Water Demand(Litres) 11.25 – 11.75 11.4 16.4 12 – 12.8 13.4
PROPE RTIES
Packing 25kg/bag 25kg/bag 40kg/bag 40kg/bag 40kg/bag
Render And Screed Series
E.MIX Block Plaster
E.MIX Easi Render 09
E.MIX Eco Render
E.MIX ALC Render
E.MIX Thick Render 06
E.MIX Easi Screed
4 – 6mm 5 – 15mm 5 – 15mm 5 – 15mm 10 – 25mm 5 – 50mm 2 Hours Approx 1 hour Approx 1 hour Approx 1 hour Approx 1 hour -
Grey Grey Grey Grey Grey Grey 1.4kg/m2/mm 1.6kg/m2/mm 1.6kg/m2/mm 1.6kg/m2/mm 1.7kg/m2/mm 1.6kg/m2/mm
10.4 – 11.2 6.8 – 7.6 7.8 8 6 – 6.8 6.8 40kg/bag 40kg/bag 40kg/bag 40kg/bag 40kg/bag 40kg/bag
Waterproofing
Weberdry WP 100-SF Weberdry WP 200-F
Weberdry WP 300-E
Type Semi-Flexible Flexible Elastomeric Powder (kg) 20 25 25 Emulsion (L) 5 9 18 Pot Life 2 Hours 2 Hours 2 Hours Drying Time 8 Hours 3 Hours 4 Hours Water Absorption ≈ 0.20% ≈ 0.10% ≈ 0.04% Water Penetration Water Tight Water Tight Water Tight Elongation - > 100% > 200% Adhesion (N/mm2) > 0.60 > 0.50 > 0.50 Coverage 1.0kg/m2/coat 1.0kg/m2/coat 1kg/m2/coat
PROPERTIES
Total Coverage/Set 25m2/coat 34m2/coat 43m2/coat
Non Shrink Grout
Webertec NSG 123 Webertec NSG 124
Type Cementitious Cementitious Packing 25kg/bag 25kg/bag Water Demand (%) 16.5 21 Typical Yield 13 16.6 Wet Density (kg/L) 2.12 1.82 Expansion (%) < 0.4 < 0.4 Shrinkage (%) 0 0 Bleeding (%) 0 0
PROPERTIES
Compressive Strength, N/mm2: 1 day 7 days 28 days
> 20> 40 > 50
> 25> 55 > 70
Coat Thickness Pot Life Colour Consumption Water Demand(Litres)
PROPE RTIES
Packing
TYPE OF PRODUCTS
PARAMETERS
EMIX PRODUCTS SELECTOR :
Skim Coat Series / Render and Screed Series / Waterproofing / Non Shrink Grout
Note: Bond strength depicted in this brochure are based on 28 days Air Dry Test
PARAMETERS
PARAMETERS
PARAMETERS
TYPE OF PRODUCTS
TYPE OF PRODUCTS
TYPE OF PRODUCTS
2323
Weber Project Reference
Main contractor :Pembinaan Mitrajaya Sdn Bhd Plaster & Mortar Solution :EMIX Easi Render 09EMIX Thick Render 06EMIX Easi Base White, EMIX Finish White
PJ MIDTOWN
Main contractor :Inta Bina Sdn Bhd
Plaster & Mortar Solution :EMIX Block Plaster
EMIX Easi Base White, EMIX Easi Base Grey,
ECO GRANDEUR
Main contractor : OSK Construction Sdn BhdPlaster & Mortar Solution :EMIX Easi Render 09EMIX Easi Base GreyEMIX Finish Grey
WINDMILL UPON HILLS Service Apartments 1108 Units
2424
Weber Project Reference
Main contractor :Malinta Corporation Sdn BhdPlaster & Mortar Solution :EMIX Block PlasterEMIX Ease Base GreyEMIX Finish Grey
GAMUDA GARDENSPhase 2B – 126 Units 2 Storey
Main contractor :Conlay Construction Sdn Bhd
Plaster & Mortar Solution :EMIX Easi Render 09
EMIX Easi Base WhiteEMIX Finish White
EMIX Easi Base GreyEMIX Finish Grey
DATUM JELATEKApartments–4 Buildings, 674 Units
Main contractor :ODS Construction Chemical Sdn BhdPlaster & Mortar Solution :EMIX Easi Render 09EMIX Block PlasterEMIX Easi Base GreyEMIX Finish Grey
UNIVERSITY SAINS ISLAM NILAI
2525
Main contractor :Kasugi Finishing Materials :Marble / Granite for Floor (600 x 600mm)Porcelain Tiles for Floor (600 x 600mm, 300 x 600mm)Porcelain Tiles for Wall (300 x 600mm, 300 x 300mm)Tile Adhesive Solution used :Weberset CTF Grey with Webermix Admix Plus
MENARA BANK RAKYAT
Main contractor :UEMC
Finishing Materials:Porcelain Tiles for Floor
(600 x 600mm, 300 x 600mm)Porcelain Tiles for Wall
(300 x 600mm, 300 x 300mm)Tile Adhesive Solution used:
Weberset X’traflex (C2 TE S1)
KLIA 2
Weber Project Reference
Main contractor : Iras SejiwaFinishing Materials :Porcelain Tiles for Floor (600 x 600mm)Porcelain Tiles for Wall (600 x 600mm)Weber Product used :weberset x’tra flex weberset superflex 21webermix admix I
UTC Pudu Sentral(All UTC branch throughout Malaysia)
2626
Main contractor :Sykt Pembinaan YTL Sdn BhdFinishing Materials :Marble / Granite for Floor (600 x 600mm) Porcelain Tiles for Floor (600 x 600mm, 300 x 600mm)Porcelain Tiles for Wall (300 x 600mm, 300 x 300mm)Tile Adhesive Solution used :Weberset Superflex 21
CAPERS
Main contractor :Allied Engineering & Construction
Finishing Materials : Porcelain Tiles for Floor
(600 x 600mm, 300 x 600mm)Porcelain Tiles for Wall
(300 x 600mm, 300 x 300mm)Tile Adhesive Solution used :
Weberset One-Fix (Floor) – C2 EWeberset X’tra-Flex (C2TES1)
KENCANA SQUARE
Weber Project Reference
Main contractor :Gadang EngineeringFinishing Materials :Porcelain Tiles for Internal Floor (300 x 300mm)Porcelain Tiles for Internal Wall (600 x 600mm)Weber Product used :weberset CTF grey weberset superflex 21
HOSPITAL SHAH ALAM
2727
Weber Project Reference
Main contractor :Daewoo & E & C
Finishing Materials :Marble / Granite for Floor (600 x 600mm)
Porcelain Tiles for Floor(600 x 600mm, 300 x 600mm)
Porcelain Tiles for Wall(300x 600mm, 300 x 300mm)
Tile Adhesive Solution used :Weberset CTF Grey with Webermix Admix Plus,
Weberset easy flex
MATRADE CONVENTIONCENTER (KL METROPOLIS)
Main contractor :Daewoo E & CFinishing Materials :Marble / Granite for Floor (600 x 600mm)Porcelain Tiles for Floor (600 x 600mm, 300 x 600mm)Porcelain Tiles for Wall (300 x 600mm, 300 x 300mm)Tile Adhesive Solution used :Weberset Superflex 21
IB TOWER KL
Main contractor :Sime DarbyFinishing Materials :Porcelain Tiles for Internal wall (300 x 300mm)Porcelain Tiles for Internal wall (300 x 600mm)Porcelain Tiles for Internal floor (600 x 600mm)Weber Product used :weberset one fix weberset superflex 21
ELMINA
SAINT-GOBAIN WEBER (M) SDN BHD
KL Office:No.29 & 31, Jalan TIAJ 2/1, Taman Industri Alam Jaya,42300 Bandar Puncak Alam, Selangor D E, Malaysia.
Tel: 603-6038 9498/9497Fax: 603-6038 9507
Penang Office:No.8, Lintang Beringin 2, Jalan Permatang Damar Laut,
Diamond Valley Light Industri Park,11960 Bayan Lepas, Penang Malaysia.
Tel: 604-626 2830/2829Fax: 604-626 2106
EMIX INDUSTRY (M) SDN BHD (1015627-T)
22-1, Jalan 7/108C, Taman Sungai Besi, 57100 Kuala Lumpur, Malaysia.
Tel: 603-7988 0238Fax: 603-7988 0239
www.mys.weber
Saint-Gobain Weber Malaysia
Weber MY
Saint-Gobain Weber Malaysia
All instruction and information are provided by us for general guidance only and are believed to be accurate and complete. Users must exercise special care and caution depending on the conditions and particular purpose of usage and are responsible to ensure that they have consulted our latest literature. To the maximum extent allowed by law, Saint-Gobain Weber (M) Sdn Bhd, its representa-tives, agents or distributors shall be under no liability for any loss or damage, including loss of profits and other economic or physical losses.