Timesavers RB – Rotary Brush Machine
Pregrinding, rounding edges, laser oxide removal and surface finishing in one single pass
Timesavers RB – Rotary Brush Machine New design
Pregrinding, rounding edges in combination with laser oxide
removal, and surface finishing in one single pass
Deburring and equally rounding edges with abrasive flap brushes
Rounding edges with R2
Coated Parts
Profiled parts with protrusions
Timesavers RB – Rotary Brush Machine New design
RADIUS < 2 mm
Lasergauge Radius measuring HS722
Timesavers RB – Rotary Brush Machine New design
Plasma cut parts
HAMMERHEAD TM
Removal of heavy slag with hardened steel pins
Shaft assembly with Pins on a slide,
for easy change or maintenance
Laser cut parts
Laser cut Aluminium parts
Pregrinding with abrasive belt Debrurring and equal
rounding edges with abrasive flap brushes
Pregrinding with abrasive belt, debrurring and
equal rounding edges with abrasive flap brushes
and surface finishing with Non woven belt
Pregrinding with 2 abrasive belts, debrurring and equal rounding edges with
abrasive flap brushes and surface finishing with Non woven belt
Before After
Laser-Oxide-Removal with steel wire brushes
BEFORE
AFTER
not adjustable adjustable
CHARACTERISTICS
- New design, without visible bolt and nuts and easy access for quick tool change
and cleaning operation
- Improved process control with new operation panel at 45 degrees.
- Window doors and illuminated machine interior to control the process
- Vacuum table and high friction conveyor belt to be able to process small parts
from 50 x 50 mm
- Automatice cleaning cycle for cleaning the inside of vacuum table when stopping
the machine
- LED Bars on infeed and outfeed side that shows the machine status
- Red emergency stop
- Blue machine in Standby
- Green machine in operation
- Processing of mixed materials possible, when using suitable wet dust extractor
- Quick exchange of the tooling, which leads to short down time when processing
different materials
- Working Width 1350, 1350/1500 and 1600mm
LED Bars on infeed and outfeed side, shows
machine status
Intuitive operation
Control at 45 degrees angle
Rotary brush head
- Brush head with 8 counter rotating
abrasive flap brushes
- Standard vacuum table to hold small
parts from 50 x 50 mm
- Very long tool life approx. 3000 hours
- Product thickness upto 100mm
- Frequency controlled brush speed
- Frequency controlled feed speed 0,2-8m/min
- Motorised adjustment of the head
- Brushes with Quick exchange system
Tool change within 10 min.
- Processing different part thickness
with single setting
Timesavers RB – Rotary Brush Machine; Executions
Model 42-Series-1350-Rb Model 42-Series-1350-WRb Model 42-Series-1350-WRbW
Braking and rounding edges Pregrinding + Braking and rounding edges Pregrinding + Braking and rounding
edges + Surface finishing
Model 42-Series-1350-WWRbW; 2x Pregrinding + Braking and rounding edges + Surface finishing
Timesavers RB – Rotary Brush Machine Tool change
21 3
Timesavers RB – Rotary Brush Machine
Machine with wet dust extraction unit
Timesavers RB – Rotary Brush Machine
Siemens TP-1200 Screen control – touch screen
Option: Extended infeed 500 mm with 2 Rollers
Timesavers RB – Rotary Brush Machine
Option: Extended infeed 1000 mm
with 7 Rollers and Side guide
Option: Extended feed 1000 mm
Timesavers RB – Rotations Bürstmaschine
Option: 180 Degrees Return Conveyor
Timesavers RB – Rotations Bürstmaschine
Option:
Extended Rear Table
Option: Camera on outfeed side of machine
Timesavers RB – Rotary Brush Machine
Timesavers RB – Timesavers RB – Rotary Brush Machine : product cleaning
Wandres product cleaning brush for parts for electrical cabinets
Automatic vacuum regulation
and
Cleaning of vacuum table
Automatic cleaning of the vacuum table. Cleaning hatches open automatically
when the machine is stopped or latest after 4 hours production.
Timesavers RB – Rotary Brush Machine – Lifetime of the tooling exceeds 3000 hours
MOBA
punkt Haarenlänge Stunden
1 September-09 92 0
2 oktober 09 89 300
3 November-09 85 600
4 February-10 80 930
5 March-10 75 1070
6 April-10 71 1200
7 May-10 68 1430
8 July-10 65 1650
9 September-10 60 1920
10 October-10 58 2080
11 December-10 54 2330
12 januari 2011 50 2450
13 Februari 2011 46 2680
14 March-11 41 2810
15 April-11 36 2930
16 May-11 32 3044
Customer MOBA operation hours ca. 1600 / Year
Processes 800 Tons/year Lasercut stainless steel: 1, 1.5, 2 and 3 mm
Comissioning of 2 machines in aug / sept 2009 ( Brush speed ca. 50%)
Timesavers International B.V.Fruitlaan 20-30, NL-4462 EP Goes
The Netherlands
T. +31 113 23 89 11
F. +31 113 23 20 03
www.timesaversint.com