sensible today, smarter tomorrow
Lighting Control SystemseTM
we owe it to our planet
Advancement in technology is making life easier but at the same time translating
into serious environmental concerns. Every small step towards energy
conservation will make a difference in the current energy crisis scenario. So, as a
responsible global citizen, it becomes imperative for us to opt for energy efficient
solutions. After all, it makes a sound business sense too.
01
Research shows that in a facility, lighting accounts for 22% of energy usage. Intelligent lighting solution
with Lighting Controls presents a great opportunity for improved returns in this scenario. It cuts down
energy usage for lighting significantly, and at the same time, it also makes areas more productive,
efficient and green. Lighting Controls deliver intelligent lighting with substantial (upto an attractive 35%)
savings on energy costs. They also provide convenient automated operations and features like safety,
reliability and ease of installation.
'eSense' – the new range of Lighting Control Systems – is a sensible decision in the current circumstances.
It is no wonder then that Lighting Controls is being looked upon as a small investment which paves way
for incremental returns.
Wipro Lighting offers a complete portfolio of Sensors and advanced Scene Select systems that combines the latest
advancement in technology and functionality. These superbly efficient devices optimize and control energy usage
delivering immense savings and significant returns on investment. These smart systems offer plenty of convenience and,
most importantly, create a comfortable working environment.
02
Pg 5 PIR OccupancySensors
Pg 6 PIR Occupancysensor withDaylight dimming
Pg 7 Pg 8 Pg 9
Pg 11 Wall mountedPIR Occupancysensor
Pg 12 Light sensorwith dimming
Pg 13 Time Switch Pg 13 Time Switch
PIR Dual circuitOccupancy withDaylight dimming
sensible today, smarter tomorrow
eTM
Microwave Occupancyand Daylight dimmingsensors
Microwave Occupancyand Daylight dimmingsensors
Pg 14 Scene SelectSystems
Typical product application and savings in a Modern Workspace – Pg 04 | Accessories and Wiring Diagrams – Pg 17-18
we owe it to our planet
Advancement in technology is making life easier but at the same time translating
into serious environmental concerns. Every small step towards energy
conservation will make a difference in the current energy crisis scenario. So, as a
responsible global citizen, it becomes imperative for us to opt for energy efficient
solutions. After all, it makes a sound business sense too.
01
Research shows that in a facility, lighting accounts for 22% of energy usage. Intelligent lighting solution
with Lighting Controls presents a great opportunity for improved returns in this scenario. It cuts down
energy usage for lighting significantly, and at the same time, it also makes areas more productive,
efficient and green. Lighting Controls deliver intelligent lighting with substantial (upto an attractive 35%)
savings on energy costs. They also provide convenient automated operations and features like safety,
reliability and ease of installation.
'eSense' – the new range of Lighting Control Systems – is a sensible decision in the current circumstances.
It is no wonder then that Lighting Controls is being looked upon as a small investment which paves way
for incremental returns.
Wipro Lighting offers a complete portfolio of Sensors and advanced Scene Select systems that combines the latest
advancement in technology and functionality. These superbly efficient devices optimize and control energy usage
delivering immense savings and significant returns on investment. These smart systems offer plenty of convenience and,
most importantly, create a comfortable working environment.
02
Pg 5 PIR OccupancySensors
Pg 6 PIR Occupancysensor withDaylight dimming
Pg 7 Pg 8 Pg 9
Pg 11 Wall mountedPIR Occupancysensor
Pg 12 Light sensorwith dimming
Pg 13 Time Switch Pg 13 Time Switch
PIR Dual circuitOccupancy withDaylight dimming
sensible today, smarter tomorrow
eTM
Microwave Occupancyand Daylight dimmingsensors
Microwave Occupancyand Daylight dimmingsensors
Pg 14 Scene SelectSystems
Typical product application and savings in a Modern Workspace – Pg 04 | Accessories and Wiring Diagrams – Pg 17-18
03
Intelligent Controls for Cost, Convenience and Comfort
COST :
CONVENIENCE :
COMFORT :
'eSense' range of lighting sensors provide smart and intelligent controls to reduce
energy wastage and result in savings upto 35%.
'eSense' Scene Select systems allow smooth transition of lighting scenes at
the touch of a button.
'eSense' light and dimming sensors regulate the luminaire output to maintain
uniform lighting levels, thus creating comfortable and pleasant working conditions.
eTM
e30%e
eOPEN PLAN OFFICE
PIR Occupancy sensor detects
human presence and switches
the luminaires on / off
OPEN PLAN OFFICE
Microwave sensor ensures
detection of small
movements in large areas
DISCUSSION ROOM
Wall mounted Occupancy
Sensor detects presence
by Passive Infrared
REST ROOM
Time switch – Pressing ON
button switches lights on; the
lights will switch off
automatically after a preset
time period has elapsed
CONFERENCE ROOM
Scene Select system offers
flexibility to choose
between pre-set scenes at
the touch of a button
LONG CORRIDOR
Long range presence
detection by Microwave
technology
MANAGER CABIN
PIR Occupancy sensor with
daylight dimming detects
presence and available
natural light to regulate light
output suitably
Typical Product Application and Savings in a Modern Workspace
SMALL PASSAGE
Daylight Sensor detects
available natural light and
controls luminaire output
suitably
04
e60%savings
35%savings savings
Large office spaces, meeting and conference rooms, cafeterias, floors after floors of long corridors, manager cabins, rest rooms are
always well-illuminated whether ‘someone’ is present or not.
'eSense' offers an automated solution with a wide range of Lighting Control Sensors and Scene Select Systems. With ‘eSense’ you no
longer need to be dependent upon human controls to save energy but avail of significant savings, more sensibly.
30%savings
e
PANTRY
Time switch – Pressing ON
button switches lights on;
the lights will switch off
automatically after a preset
time period has elapsed
Pg 6 Pg 14 Pg 13
Pg 13Pg 11Pg 9
Pg 5
NOTE: Percentage savings calculation depends upon multiple factors. The figures may vary on case to case basis. Please consult our technical team for more details.
e30%savings
e25%savings
e30%savings
e50%savings
Pg 12 Pg 8
40%savings
03
Intelligent Controls for Cost, Convenience and Comfort
COST :
CONVENIENCE :
COMFORT :
'eSense' range of lighting sensors provide smart and intelligent controls to reduce
energy wastage and result in savings upto 35%.
'eSense' Scene Select systems allow smooth transition of lighting scenes at
the touch of a button.
'eSense' light and dimming sensors regulate the luminaire output to maintain
uniform lighting levels, thus creating comfortable and pleasant working conditions.
eTM
e30%e
eOPEN PLAN OFFICE
PIR Occupancy sensor detects
human presence and switches
the luminaires on / off
OPEN PLAN OFFICE
Microwave sensor ensures
detection of small
movements in large areas
DISCUSSION ROOM
Wall mounted Occupancy
Sensor detects presence
by Passive Infrared
REST ROOM
Time switch – Pressing ON
button switches lights on; the
lights will switch off
automatically after a preset
time period has elapsed
CONFERENCE ROOM
Scene Select system offers
flexibility to choose
between pre-set scenes at
the touch of a button
LONG CORRIDOR
Long range presence
detection by Microwave
technology
MANAGER CABIN
PIR Occupancy sensor with
daylight dimming detects
presence and available
natural light to regulate light
output suitably
Typical Product Application and Savings in a Modern Workspace
SMALL PASSAGE
Daylight Sensor detects
available natural light and
controls luminaire output
suitably
04
e60%savings
35%savings savings
Large office spaces, meeting and conference rooms, cafeterias, floors after floors of long corridors, manager cabins, rest rooms are
always well-illuminated whether ‘someone’ is present or not.
'eSense' offers an automated solution with a wide range of Lighting Control Sensors and Scene Select Systems. With ‘eSense’ you no
longer need to be dependent upon human controls to save energy but avail of significant savings, more sensibly.
30%savings
e
PANTRY
Time switch – Pressing ON
button switches lights on;
the lights will switch off
automatically after a preset
time period has elapsed
Pg 6 Pg 14 Pg 13
Pg 13Pg 11Pg 9
Pg 5
NOTE: Percentage savings calculation depends upon multiple factors. The figures may vary on case to case basis. Please consult our technical team for more details.
e30%savings
e25%savings
e30%savings
e50%savings
Pg 12 Pg 8
40%savings
PIR Occupancy Sensors
61.2 ø 76.0
3.6
3.7
DIMENSIONS
High performance, compact presence detectors provide automatic control for lighting loads. It
detects human presence and automatically turns the lights ‘ON’. When the area is vacated, the
lights turn ‘OFF’ after a preset time period.
AREA OF DETECTION
COP 10006 - Occupancy Sensor
COP 11010 - Programmable Occupancy Sensor
COP 12010 – Programmable Occupancy Sensor with Ingress Protection IP 55
Passive photocell holds lights
OFF in bright ambient conditions
Two way programming enables
easy re-commissioning when
building use changes
Remote control can be usedto override lights ON or OFF
Advanced presence detection by
passive infrared (PIR) technology
Detection pattern and range in
metres under normal operating
conditions
Maximum
Installation height
Adjustable off delay timingCOP 10006: 10 sec – 30 minCOP 11010 & COP 12010 :10 sec – 99 min
IP 55 protection in COP 12010
provides added advantage
in special applications
Sensitivity level
adjustments
Cat. No. Sensing Technique Max. Height Area of Detection Off delay timing Lighting Load CFL / FTL
COP 10006 Passive Infrared 2.8 m 7 m 10 sec to 30 min 6 ballasts
COP 11010 Passive Infrared 2.8 m 7 m 10 sec to 99 min 10 amps
COP 12010 Passive Infrared 2.8 m 7 m 10 sec to 99 min 10 amps
* Not applicable for COP 10006
* Not applicable for COP 10006
05
Cat. No. Sensing Technique Type of ballast Max. Height Area of Detection Lighting Load CFL / FTL
CDA13010 Passive Infrared 1-10 V Analogue 2.8 m 7 m 10 ballasts
61.2 ø 76.0
3.6
3.7
DIMENSIONS
High performance, compact presence detector provides automatic control for lighting loads. It can be
used for CFL/FTL with 1-10 V analogue dimmable ballast. Along with presence detection, this sensor
has built-in adjustable photocell which regulates the lighting level as per availability of natural daylight
in an area, thus maintaining uniform illumination.
CDA 13010 - Occupancy sensor with daylight dimming suitable for 1-10 V analogue ballast
PIR Occupancy Sensor withDaylight dimming
Regulating Photocell measures
light levels in an area and adjusts
luminaire output to maintain
constant lux level
Two way programming enables
easy re-commissioning when
building use changes
Advanced presence detection by
passive infrared (PIR) technology
Detection pattern and range in
metres under normal operating
conditions
Maximum
Installation heightAdjustable off delay timing10 sec – 99 min
Sensitivity level
adjustments
AREA OF DETECTION
06
Remote control can be used tochange output lux levels andoverride lights ON or OFF
Best suited for : Open plan workstation areas, Corridors, Individual cabins, Reception areas, Discussion rooms Best suited for : Open plan workstation areas, Glazed areas, Meeting rooms, Individual cabins, Reception areas
7m7m
2.8 m IPIP
MinMin
MaxMax
7m7m
2.8 m
MinMin
MaxMaxR
All dimensions are in mm. Tolerance + 2 mm. All dimensions are in mm. Tolerance + 2 mm.
7m
7m
2.8
m
SIDE ELEVATION PLAN
highsensitivity
lowsensitivity 5m
5m
7m
7m
2.8
m
SIDE ELEVATION PLAN
highsensitivity
lowsensitivity 5m
5m
PIR Occupancy Sensors
61.2 ø 76.0
3.6
3.7
DIMENSIONS
High performance, compact presence detectors provide automatic control for lighting loads. It
detects human presence and automatically turns the lights ‘ON’. When the area is vacated, the
lights turn ‘OFF’ after a preset time period.
AREA OF DETECTION
COP 10006 - Occupancy Sensor
COP 11010 - Programmable Occupancy Sensor
COP 12010 – Programmable Occupancy Sensor with Ingress Protection IP 55
Passive photocell holds lights
OFF in bright ambient conditions
Two way programming enables
easy re-commissioning when
building use changes
Remote control can be usedto override lights ON or OFF
Advanced presence detection by
passive infrared (PIR) technology
Detection pattern and range in
metres under normal operating
conditions
Maximum
Installation height
Adjustable off delay timingCOP 10006: 10 sec – 30 minCOP 11010 & COP 12010 :10 sec – 99 min
IP 55 protection in COP 12010
provides added advantage
in special applications
Sensitivity level
adjustments
Cat. No. Sensing Technique Max. Height Area of Detection Off delay timing Lighting Load CFL / FTL
COP 10006 Passive Infrared 2.8 m 7 m 10 sec to 30 min 6 ballasts
COP 11010 Passive Infrared 2.8 m 7 m 10 sec to 99 min 10 amps
COP 12010 Passive Infrared 2.8 m 7 m 10 sec to 99 min 10 amps
* Not applicable for COP 10006
* Not applicable for COP 10006
05
Cat. No. Sensing Technique Type of ballast Max. Height Area of Detection Lighting Load CFL / FTL
CDA13010 Passive Infrared 1-10 V Analogue 2.8 m 7 m 10 ballasts
61.2 ø 76.0
3.6
3.7
DIMENSIONS
High performance, compact presence detector provides automatic control for lighting loads. It can be
used for CFL/FTL with 1-10 V analogue dimmable ballast. Along with presence detection, this sensor
has built-in adjustable photocell which regulates the lighting level as per availability of natural daylight
in an area, thus maintaining uniform illumination.
CDA 13010 - Occupancy sensor with daylight dimming suitable for 1-10 V analogue ballast
PIR Occupancy Sensor withDaylight dimming
Regulating Photocell measures
light levels in an area and adjusts
luminaire output to maintain
constant lux level
Two way programming enables
easy re-commissioning when
building use changes
Advanced presence detection by
passive infrared (PIR) technology
Detection pattern and range in
metres under normal operating
conditions
Maximum
Installation heightAdjustable off delay timing10 sec – 99 min
Sensitivity level
adjustments
AREA OF DETECTION
06
Remote control can be used tochange output lux levels andoverride lights ON or OFF
Best suited for : Open plan workstation areas, Corridors, Individual cabins, Reception areas, Discussion rooms Best suited for : Open plan workstation areas, Glazed areas, Meeting rooms, Individual cabins, Reception areas
7m7m
2.8 m IPIP
MinMin
MaxMax
7m7m
2.8 m
MinMin
MaxMaxR
All dimensions are in mm. Tolerance + 2 mm. All dimensions are in mm. Tolerance + 2 mm.
7m
7m
2.8
m
SIDE ELEVATION PLAN
highsensitivity
lowsensitivity 5m
5m
7m
7m
2.8
m
SIDE ELEVATION PLAN
highsensitivity
lowsensitivity 5m
5m
Cat. No. Sensing Technique Type of ballast Max. Height Area of Detection Lighting Load – switching Lighting Load – dimming
CDD 14020 Passive infrared DSI / DALI 2.8 m 7 m 10 Amp 20 ballasts
Channel 1 Channel 2
DIMENSIONS
High performance, compact presence detectors with dual circuit control. The dimming channel can
be used to control light output of luminaires. The photocell measures available natural daylight and
maintains uniform lux level. The switching channel can be used to switch On/Off separate channel
of standard non dimming luminaires.
AREA OF DETECTION
CDD 14020 - Dual circuit Occupancy Sensor with daylight dimming using DSI / DALI ballast
PIR Dual Circuit Occupancy Sensorwith Daylight dimming
Regulating Photocell measures
light levels in an area and adjusts
luminaire output to maintain
constant lux level
Two way programming enables
easy re-commissioning when
building use changes
Remote control can be used tochange output lux levels andoverride lights ON or OFF
Advanced presence detection by
passive infrared (PIR) technology
Detection pattern and range in
metres under normal operating
conditions
Maximum
Installation heightAdjustable off delay timing10 sec – 99 min
Sensitivity level
adjustments
Flexibility of having two channels
for switching and dimming
07
61.2 ø 76.0
3.6
3.7
AREA OF DETECTION
7m
7m
2.8
m
SIDE ELEVATION PLAN
highsensitivity
lowsensitivity 5m
5m
7m7m
2.8 m
MinMin
MaxMaxR
Microwave Occupancy andDaylight dimming Sensors
Highly sensitive, Microwave presence detectors provide automatic control of lighting.
It works by emitting low power microwave signals and measuring the reflections as
the signal bounce off moving objects.
Regulating photocell adjusts
luminaires output to maintain
constant light levels
Advanced presence detection by
microwave technology
Flexibility of having two channels
for switching and dimming
Cat. No. Sensing Technique Type of ballast Max. Height Area of Detection Lighting Load – switching Lighting Load – dimming
COM 23010 Microwave Non Regulating 2.8 16 m 10 Amp NA
CDA 24010 Microwave 1-10 V Analogue 2.8 16 m NA 10 Ballasts
CDD 25020 Microwave DSI/DALI 2.8 16 m 10 Amp Channel 1 20 Ballasts Channel 2
DIMENSIONS
Passive Photocell holds lights off
in bright ambient conditions
Two way programming enables
easy re-commissioning when
building use changes
Detection pattern and range in
metres under normal operating
conditions
Installation height
Adjustable off delay timing10 sec – 99 min
Sensitivity adjustments
COM 23010 – Occupancy Sensor
CDA 24010 – Occupancy Sensor with Daylight Dimming [1-10 V Analogue]
CDD 25020 – Dual circuit Occupancy Sensor with Daylight Dimming [DSI / DALI]
* Not applicable for COM 23010 and CDA 24010
16 m
16 m
2.8
m
SIDE ELEVATION PLAN
highsensitivity
lowsensitivity
08
* Not applicable for COM 23010
61.2 ø 76.0
3.6
3.7
R2.8 m
16m16mMinMin
MaxMax
Best suited for : Open plan workstation areas, Small & Medium offices, Conference rooms, Manager cabins, Meeting rooms Best suited for : Open plan workstation areas, Lobbies and Waiting rooms, Class rooms, Gymnasiums, Cafeterias, Meeting rooms
12 m
12 m
All dimensions are in mm. Tolerance + 2 mm. All dimensions are in mm. Tolerance + 2 mm.
Cat. No. Sensing Technique Type of ballast Max. Height Area of Detection Lighting Load – switching Lighting Load – dimming
CDD 14020 Passive infrared DSI / DALI 2.8 m 7 m 10 Amp 20 ballasts
Channel 1 Channel 2
DIMENSIONS
High performance, compact presence detectors with dual circuit control. The dimming channel can
be used to control light output of luminaires. The photocell measures available natural daylight and
maintains uniform lux level. The switching channel can be used to switch On/Off separate channel
of standard non dimming luminaires.
AREA OF DETECTION
CDD 14020 - Dual circuit Occupancy Sensor with daylight dimming using DSI / DALI ballast
PIR Dual Circuit Occupancy Sensorwith Daylight dimming
Regulating Photocell measures
light levels in an area and adjusts
luminaire output to maintain
constant lux level
Two way programming enables
easy re-commissioning when
building use changes
Remote control can be used tochange output lux levels andoverride lights ON or OFF
Advanced presence detection by
passive infrared (PIR) technology
Detection pattern and range in
metres under normal operating
conditions
Maximum
Installation heightAdjustable off delay timing10 sec – 99 min
Sensitivity level
adjustments
Flexibility of having two channels
for switching and dimming
07
61.2 ø 76.0
3.6
3.7
AREA OF DETECTION
7m
7m
2.8
m
SIDE ELEVATION PLAN
highsensitivity
lowsensitivity 5m
5m
7m7m
2.8 m
MinMin
MaxMaxR
Microwave Occupancy andDaylight dimming Sensors
Highly sensitive, Microwave presence detectors provide automatic control of lighting.
It works by emitting low power microwave signals and measuring the reflections as
the signal bounce off moving objects.
Regulating photocell adjusts
luminaires output to maintain
constant light levels
Advanced presence detection by
microwave technology
Flexibility of having two channels
for switching and dimming
Cat. No. Sensing Technique Type of ballast Max. Height Area of Detection Lighting Load – switching Lighting Load – dimming
COM 23010 Microwave Non Regulating 2.8 16 m 10 Amp NA
CDA 24010 Microwave 1-10 V Analogue 2.8 16 m NA 10 Ballasts
CDD 25020 Microwave DSI/DALI 2.8 16 m 10 Amp Channel 1 20 Ballasts Channel 2
DIMENSIONS
Passive Photocell holds lights off
in bright ambient conditions
Two way programming enables
easy re-commissioning when
building use changes
Detection pattern and range in
metres under normal operating
conditions
Installation height
Adjustable off delay timing10 sec – 99 min
Sensitivity adjustments
COM 23010 – Occupancy Sensor
CDA 24010 – Occupancy Sensor with Daylight Dimming [1-10 V Analogue]
CDD 25020 – Dual circuit Occupancy Sensor with Daylight Dimming [DSI / DALI]
* Not applicable for COM 23010 and CDA 24010
16 m
16 m
2.8
m
SIDE ELEVATION PLAN
highsensitivity
lowsensitivity
08
* Not applicable for COM 23010
61.2 ø 76.0
3.6
3.7
R2.8 m
16m16mMinMin
MaxMax
Best suited for : Open plan workstation areas, Small & Medium offices, Conference rooms, Manager cabins, Meeting rooms Best suited for : Open plan workstation areas, Lobbies and Waiting rooms, Class rooms, Gymnasiums, Cafeterias, Meeting rooms
12 m
12 m
All dimensions are in mm. Tolerance + 2 mm. All dimensions are in mm. Tolerance + 2 mm.
high sensitivity
low sensitivity
25m
20m
8m
4m
6m
2.6
m
Floor Level
Side Elevation
Sensor head o
position set to 80
Microwave Occupancy and Daylight dimming Sensors
Highly sensitive, Microwave presence detectors provide automatic control of lighting. It works by emitting
low power microwave signals and measuring the reflections as the signals bounce off moving objects. It
has a unique adjustable sensor that allows the area of detection to be optimized for the application.
92
3.5
3.585
Regulating photocell adjusts
luminaire output to maintain
constant light levels
Advanced presence detection by
microwave technology
Cat. No. Sensing Technique Type of ballast Max. Height Area of Detection Lighting Load – switching Lighting Load – dimming
COM 20010 Microwave Non Regulating 2.6 30 x 6 m 10 Amp NA
CDA 21010 Microwave 1-10 V Analogue 2.6 30 x 6 m NA 10 Ballasts
CDD 22020 Microwave DSI/DALI 2.6 30 x 6 m 10 Amp Channel 1 20 Ballasts Channel 2
DIMENSIONS AREA OF DETECTION
Passive photocell holds lights off
in bright ambient conditions
Two way programming enables
easy re-commissioning when
building use changes
Detection pattern and range in
metres under normal operating
conditions
Installation height
Adjustable off delay timing10 sec – 99 min
Sensitivity level
adjustments
COM 20010 – Occupancy Sensor
CDA 21010 – Occupancy Sensor with Daylight Dimming [1-10V Analogue]
CDD 22020 – Dual Circuit Occupancy Sensor with Daylight Dimming [DSI / DALI]
Sensitivity set to 80 %
09
*Not applicable for COM 20010R
2.6 m
30m30mMinMin
MaxMax
Best suited for : Long corridors, Passages, Storage areas, Libraries, Lobbies
All dimensions are in mm. Tolerance + 2 mm.
Flexibility of having two channels
for switching and dimming *Not applicable for COM 20010 and
CDA 21010
MinMin
MaxMax
30m
25m
10m
6m
2.6
m
Floor Level
Side Elevation
8m
22m
16m
6m
2.6
m
Floor Level
Side Elevation
5m
AREA OF DETECTION
high sensitivity
low sensitivity
Sensor head o
position set to 80
Sensitivity set to Maximum
high sensitivity
low sensitivity
Sensor head o
position set to 0
Sensitivity set to Maximum
10
MinMin
MaxMax
MinMin
MaxMax
high sensitivity
low sensitivity
25m
20m
8m
4m
6m
2.6
m
Floor Level
Side Elevation
Sensor head o
position set to 80
Microwave Occupancy and Daylight dimming Sensors
Highly sensitive, Microwave presence detectors provide automatic control of lighting. It works by emitting
low power microwave signals and measuring the reflections as the signals bounce off moving objects. It
has a unique adjustable sensor that allows the area of detection to be optimized for the application.
92
3.5
3.585
Regulating photocell adjusts
luminaire output to maintain
constant light levels
Advanced presence detection by
microwave technology
Cat. No. Sensing Technique Type of ballast Max. Height Area of Detection Lighting Load – switching Lighting Load – dimming
COM 20010 Microwave Non Regulating 2.6 30 x 6 m 10 Amp NA
CDA 21010 Microwave 1-10 V Analogue 2.6 30 x 6 m NA 10 Ballasts
CDD 22020 Microwave DSI/DALI 2.6 30 x 6 m 10 Amp Channel 1 20 Ballasts Channel 2
DIMENSIONS AREA OF DETECTION
Passive photocell holds lights off
in bright ambient conditions
Two way programming enables
easy re-commissioning when
building use changes
Detection pattern and range in
metres under normal operating
conditions
Installation height
Adjustable off delay timing10 sec – 99 min
Sensitivity level
adjustments
COM 20010 – Occupancy Sensor
CDA 21010 – Occupancy Sensor with Daylight Dimming [1-10V Analogue]
CDD 22020 – Dual Circuit Occupancy Sensor with Daylight Dimming [DSI / DALI]
Sensitivity set to 80 %
09
*Not applicable for COM 20010R
2.6 m
30m30mMinMin
MaxMax
Best suited for : Long corridors, Passages, Storage areas, Libraries, Lobbies
All dimensions are in mm. Tolerance + 2 mm.
Flexibility of having two channels
for switching and dimming *Not applicable for COM 20010 and
CDA 21010
MinMin
MaxMax
30m
25m
10m
6m
2.6
m
Floor Level
Side Elevation
8m
22m
16m
6m
2.6
m
Floor Level
Side Elevation
5m
AREA OF DETECTION
high sensitivity
low sensitivity
Sensor head o
position set to 80
Sensitivity set to Maximum
high sensitivity
low sensitivity
Sensor head o
position set to 0
Sensitivity set to Maximum
10
MinMin
MaxMax
MinMin
MaxMax
Wall mounted PIR Occupancy Sensor
Wall mounted PIR sensors are designed to provide automatic control of lighting. It detects
movement using passive infrared technology and turns the light ‘ON’. When the area is
no longer occupied, the light switches ‘OFF’ after a preset time out period.
Maximum installation height
Cat. No. Sensing Technology Area of Detection Max. Height Off Delay timing Lighting Load – CFL / FTL
COP 16006 Passive Infrared 9 x 6 m 1.2 – 1.5 m 10 sec – 60 min 6 ballasts
COP 16006 – Wall mounted Occupancy Sensor
19 86
60.3
86
15
10
DIMENSIONS AREA OF DETECTION
4-6
m
5-9m
5-9m
Plan view Side Elevation
Floor Level
1.5
m
3-4
m
highsensitivity
lowsensitivity
11
Adjustable off delay timing10 sec – 60 min
1.5 m
9x6m9x6m
Advanced presence detection by
passive infrared (PIR) technology
Detection pattern and range in
metres under normal operating
conditions
Best suited for : Meeting rooms, Manager cabins, Enclosed work areas, Discussion rooms, Rest rooms
All dimensions are in mm. Tolerance + 2 mm.
Light Sensor with Dimming
High performance, regulating and switching photocell for DSI/DALI ballast. Light sensor
automatically adjusts light output of luminaires depending upon the amount of natural
available light to maintain uniform lux levels.
CLD 15020 – Sensor with Dimming photocell
Regulating photocell adjusts
luminaire output to maintain
constant light levels [100 to 1000 lux]
Cat. No. Type of ballast Max. Height Lighting Load – switching Lighting Load – dimming
CLD 15020 DSI/DALI 2.8 m 10 A of lighting 20 nos of DSI/DALI
Installation height
Two way programming enables
easy re-commissioning when
building use changes
61.2 ø 76.0
3.6
3.7
DIMENSIONS
12
Light output regulated to 80% dueto cloudy weather and inadequatenatural daylight
Light output regulated to 30% ona bright sunny day with adequatenatural daylight
Light output regulated to 100% atevening when no natural daylight is available
Remote control for user overrideon / off and light level adjustment
R2.8 m
Best suited for : Glazed areas, Reception areas, Showrooms, Corridors, Waiting areas
All dimensions are in mm. Tolerance + 2 mm.
Wall mounted PIR Occupancy Sensor
Wall mounted PIR sensors are designed to provide automatic control of lighting. It detects
movement using passive infrared technology and turns the light ‘ON’. When the area is
no longer occupied, the light switches ‘OFF’ after a preset time out period.
Maximum installation height
Cat. No. Sensing Technology Area of Detection Max. Height Off Delay timing Lighting Load – CFL / FTL
COP 16006 Passive Infrared 9 x 6 m 1.2 – 1.5 m 10 sec – 60 min 6 ballasts
COP 16006 – Wall mounted Occupancy Sensor
19 86
60.3
86
15
10
DIMENSIONS AREA OF DETECTION
4-6
m
5-9m
5-9m
Plan view Side Elevation
Floor Level
1.5
m
3-4
m
highsensitivity
lowsensitivity
11
Adjustable off delay timing10 sec – 60 min
1.5 m
9x6m9x6m
Advanced presence detection by
passive infrared (PIR) technology
Detection pattern and range in
metres under normal operating
conditions
Best suited for : Meeting rooms, Manager cabins, Enclosed work areas, Discussion rooms, Rest rooms
All dimensions are in mm. Tolerance + 2 mm.
Light Sensor with Dimming
High performance, regulating and switching photocell for DSI/DALI ballast. Light sensor
automatically adjusts light output of luminaires depending upon the amount of natural
available light to maintain uniform lux levels.
CLD 15020 – Sensor with Dimming photocell
Regulating photocell adjusts
luminaire output to maintain
constant light levels [100 to 1000 lux]
Cat. No. Type of ballast Max. Height Lighting Load – switching Lighting Load – dimming
CLD 15020 DSI/DALI 2.8 m 10 A of lighting 20 nos of DSI/DALI
Installation height
Two way programming enables
easy re-commissioning when
building use changes
61.2 ø 76.0
3.6
3.7
DIMENSIONS
12
Light output regulated to 80% dueto cloudy weather and inadequatenatural daylight
Light output regulated to 30% ona bright sunny day with adequatenatural daylight
Light output regulated to 100% atevening when no natural daylight is available
Remote control for user overrideon / off and light level adjustment
R2.8 m
Best suited for : Glazed areas, Reception areas, Showrooms, Corridors, Waiting areas
All dimensions are in mm. Tolerance + 2 mm.
Time Switch
Time switches are a quick and effective way to reduce energy consumption.
The light switches ‘ON’ by pressing the button; it switches OFF automatically
after a preset time period has elapsed.
CTX 17010- Time Switch
CTX 18010- Time Switch with Touch button
Cat. No. Type of ballast Off delay timings Lighting Load – CFL / FTL
CTX 17010 Non-regulating 20 sec – 20 min 10 nos
CTX 18010 Non-regulating 20 sec – 20 min 10 nos
13
1. Adjustable time period from 20 seconds to 20 minutes
2. Lights are switched ON with the touch of a button
3. No neutral is required. It can directly replace an existing switch.
1. Automatic switching OFF ensures energy savings
2. Easy to install
3. Easy to adjust OFF delay time period
4. User friendly operation
FEATURES
BENEFITS
DIMENSIONS
CTX 17010
CTX 18010
CTX 17010 CTX 18010
TOUCH
19 60.3
86
86
17
19 60.3
86
86
17
4
Best suited for : Pantry, Cafeteria, Rest rooms, Storage areas
All dimensions are in mm. Tolerance + 2 mm.
Scene Select Systems
eSense architectural
dimming systems offer
flexibility, convenience and
comfort. A smart and stylish
dimming module replaces
multiple switches and
dimmers, typically for
applications like conference
rooms, auditoriums, board
rooms etc
User friendly operations
Create and set lighting scenes to suit all occasions and
view them easily on the Status display window.
Conveniently recall pre-set scenes at the touch of a button.
Smooth Transitions
The scene select module offers harmonious transition
between scenes. This ensures that our eyes comfortably
adjust to the changed scenes.
Sleek and Stylish
One stylish dimming module replaces multiple
switches and dimmers. It offers more sophisticated
controls than creating the desired scenes manually.
Integrate with AV equipments
Can be easily integrated with touch screens and
other AV equipments
14
eTM
Time Switch
Time switches are a quick and effective way to reduce energy consumption.
The light switches ‘ON’ by pressing the button; it switches OFF automatically
after a preset time period has elapsed.
CTX 17010- Time Switch
CTX 18010- Time Switch with Touch button
Cat. No. Type of ballast Off delay timings Lighting Load – CFL / FTL
CTX 17010 Non-regulating 20 sec – 20 min 10 nos
CTX 18010 Non-regulating 20 sec – 20 min 10 nos
13
1. Adjustable time period from 20 seconds to 20 minutes
2. Lights are switched ON with the touch of a button
3. No neutral is required. It can directly replace an existing switch.
1. Automatic switching OFF ensures energy savings
2. Easy to install
3. Easy to adjust OFF delay time period
4. User friendly operation
FEATURES
BENEFITS
DIMENSIONS
CTX 17010
CTX 18010
CTX 17010 CTX 18010
TOUCH
19 60.3
86
86
17
19 60.3
86
86
17
4
Best suited for : Pantry, Cafeteria, Rest rooms, Storage areas
All dimensions are in mm. Tolerance + 2 mm.
Scene Select Systems
eSense architectural
dimming systems offer
flexibility, convenience and
comfort. A smart and stylish
dimming module replaces
multiple switches and
dimmers, typically for
applications like conference
rooms, auditoriums, board
rooms etc
User friendly operations
Create and set lighting scenes to suit all occasions and
view them easily on the Status display window.
Conveniently recall pre-set scenes at the touch of a button.
Smooth Transitions
The scene select module offers harmonious transition
between scenes. This ensures that our eyes comfortably
adjust to the changed scenes.
Sleek and Stylish
One stylish dimming module replaces multiple
switches and dimmers. It offers more sophisticated
controls than creating the desired scenes manually.
Integrate with AV equipments
Can be easily integrated with touch screens and
other AV equipments
14
eTM
Set lighting scenes to match every mood
15
eTM
§Operating method: Infra red
§Operating distance: 6 m
§Size: 45 (W) x 90 (H) x 7.6 (D) mm
§Receives dimming switch control data to control load
§Controls Circuits – 4 ON / OFF circuits, 4 dimming circuits
§Load type: Incandescent / Halogen (magnetic type) / Fluorescent (1-10V Analogue)
§Load Capacity: Dimming – Max 2000 W per unit, Switching On/Off 2000 W per unit
§Size: 150 (W) x 85 (H) x 41 (D) mm
§Mounting Box Size: 221 (W) x 200 (H) x 77 (D) mm
Dimming Power Module
16
§Built-in temperature sensor prevents overheating
§Adjustable fade time ensures smooth transition between different scenes
§Creates multiple scenes for multiple applications
§Over current and shock current protected
§Upon power cut the former state memory functions call back the last selected scene
FEATURES
MODULE OPTIONS
§CSC 0404 – 4 dimming circuits; 4 switching circuits
§CSC 0204 – 2 dimming circuits; 4 switching circuits
§CSC 0600 – 6 dimming circuits
Note – For fluorescent dimming, additional 1-10 V module is required for individual circuit (CCX-01)
Dimming Switch
TECHNICAL DETAILS
§Maximum 4 programmable scenes
§Button composition: 4 scene buttons
§Size: 195 (W) x 120 (H) x 8.5 (D) mm
§Opening size: 158 (W) x 95 (H) mm
Remote (CIC 01)
§CSC 2202 – 2 GLS / Halogen (Magnetic) dimming circuits; 2 fluorescent dimming circuits; 2 switching circuits
Note – Inbuilt dimming module. No need to order extra.
Status Display Window
Displays current dimming level
IR ReceiverRemote control signalreceiving area
ON / OFF button
Turns the directed lampON or OFF
Dimming buttons
Adjusts the applicable productluminance in stages from 0% - 100%
Scene buttons
Displays the moodpre-set in every SCENE
Set lighting scenes to match every mood
15
eTM
§Operating method: Infra red
§Operating distance: 6 m
§Size: 45 (W) x 90 (H) x 7.6 (D) mm
§Receives dimming switch control data to control load
§Controls Circuits – 4 ON / OFF circuits, 4 dimming circuits
§Load type: Incandescent / Halogen (magnetic type) / Fluorescent (1-10V Analogue)
§Load Capacity: Dimming – Max 2000 W per unit, Switching On/Off 2000 W per unit
§Size: 150 (W) x 85 (H) x 41 (D) mm
§Mounting Box Size: 221 (W) x 200 (H) x 77 (D) mm
Dimming Power Module
16
§Built-in temperature sensor prevents overheating
§Adjustable fade time ensures smooth transition between different scenes
§Creates multiple scenes for multiple applications
§Over current and shock current protected
§Upon power cut the former state memory functions call back the last selected scene
FEATURES
MODULE OPTIONS
§CSC 0404 – 4 dimming circuits; 4 switching circuits
§CSC 0204 – 2 dimming circuits; 4 switching circuits
§CSC 0600 – 6 dimming circuits
Note – For fluorescent dimming, additional 1-10 V module is required for individual circuit (CCX-01)
Dimming Switch
TECHNICAL DETAILS
§Maximum 4 programmable scenes
§Button composition: 4 scene buttons
§Size: 195 (W) x 120 (H) x 8.5 (D) mm
§Opening size: 158 (W) x 95 (H) mm
Remote (CIC 01)
§CSC 2202 – 2 GLS / Halogen (Magnetic) dimming circuits; 2 fluorescent dimming circuits; 2 switching circuits
Note – Inbuilt dimming module. No need to order extra.
Status Display Window
Displays current dimming level
IR ReceiverRemote control signalreceiving area
ON / OFF button
Turns the directed lampON or OFF
Dimming buttons
Adjusts the applicable productluminance in stages from 0% - 100%
Scene buttons
Displays the moodpre-set in every SCENE
WIRI G DIAGRAMN S
17
L/OutLN
Circuit Protection(If Required)
Live
Neutral
Luminaire
COP 10006
N
L/Out
L
Luminaire
Neutral
Live
Circuit Protection(If required)
COP 11010 , COP 12010
Please note that dimming signal is used to switch the dimming luminaire On/Off and therefore the 240V feed to the luminaire fitting must come from the permanent live supply
Neutral
LiveCircuit Protection
(if Required)
Dim-Dim+SW1/upSW2Down
L/OUTN
L
Dimming luminaire(DSI or DALI)
Dimming Ballast
Luminaire (non-dimming)
CDD 14020 – Dual CircuitCDA 13010
L/OUT
N Dim-
Dim+
SW1/upSW2Down
L
Dimming Luminaire(DSI or DALI)NEUTRAL
LIVE
CIRCUIT PROTECTION(IF REQUIRED)
Dimming Ballast
CLD 15020
ON
21
L NLive out
Circuit Protection(If required)
Live
Neutral
TIME
Load
ACCESSORIES
IR remote control user handset with lux setting functionality
CIX 01 CPX 01IR remote control programming handset with LCD screen
COP 16006
L/OUT
N Dim-
Dim+
SW1/up
SW2Down
L
Dimming Luminaire(1-10 V Analogue)
Dimming Ballast
NEUTRAL
LIVECIRCUIT PROTECTION
(IF REQUIRED)
18
CTX 17010 / CTX 18010
N
L/Out
L
Luminaire
Neutral
Live
Circuit Protection(If required)
COM 20010 / COM 23010
L/OUT
N Dim-Dim+SW1/upSW2Down
L
Dimming Luminaire(1 – 10V Analogue)
Dimming Ballast
NEUTRAL
LIVECIRCUIT PROTECTION
(IF REQUIRED)
CDA 21010 / CDA 24010
Please note that dimming signal is used to switch the dimming luminaire
On/Off and therefore the 240V feed to the
luminaire fitting must come from the
permanent live supply
Neutral
Live
Circuit Protection(if Required)
Dim-
Dim+
SW1/up
SW2Down
L/OUT
N
L
Dimming luminaire(DSI or DALI)
Dimming Ballast
Luminaire (non-dimming)
CDD 22020 / CDD 25020 – Dual Circuit
1 2 3 4 5 6 7 8 13129 1110
L
N
S3
S4
S1
S2
OFF
1 2 3 4 5 6 7 8 9 141312
L
N
1110
S3
S4
S1
S2
OFF
CSC 0404 CSC 2202
CSC 0404 CSC 2202
Overridepush down before use
Circuit protection (if required)Live
Neutral
Loads
LLiveout
On
Off
WIRI G DIAGRAMN S
17
L/OutLN
Circuit Protection(If Required)
Live
Neutral
Luminaire
COP 10006
N
L/Out
L
Luminaire
Neutral
Live
Circuit Protection(If required)
COP 11010 , COP 12010
Please note that dimming signal is used to switch the dimming luminaire On/Off and therefore the 240V feed to the luminaire fitting must come from the permanent live supply
Neutral
LiveCircuit Protection
(if Required)
Dim-Dim+SW1/upSW2Down
L/OUTN
L
Dimming luminaire(DSI or DALI)
Dimming Ballast
Luminaire (non-dimming)
CDD 14020 – Dual CircuitCDA 13010
L/OUT
N Dim-
Dim+
SW1/upSW2Down
L
Dimming Luminaire(DSI or DALI)NEUTRAL
LIVE
CIRCUIT PROTECTION(IF REQUIRED)
Dimming Ballast
CLD 15020
ON
21
L NLive out
Circuit Protection(If required)
Live
Neutral
TIME
Load
ACCESSORIES
IR remote control user handset with lux setting functionality
CIX 01 CPX 01IR remote control programming handset with LCD screen
COP 16006
L/OUT
N Dim-
Dim+
SW1/up
SW2Down
L
Dimming Luminaire(1-10 V Analogue)
Dimming Ballast
NEUTRAL
LIVECIRCUIT PROTECTION
(IF REQUIRED)
18
CTX 17010 / CTX 18010
N
L/Out
L
Luminaire
Neutral
Live
Circuit Protection(If required)
COM 20010 / COM 23010
L/OUT
N Dim-Dim+SW1/upSW2Down
L
Dimming Luminaire(1 – 10V Analogue)
Dimming Ballast
NEUTRAL
LIVECIRCUIT PROTECTION
(IF REQUIRED)
CDA 21010 / CDA 24010
Please note that dimming signal is used to switch the dimming luminaire
On/Off and therefore the 240V feed to the
luminaire fitting must come from the
permanent live supply
Neutral
Live
Circuit Protection(if Required)
Dim-
Dim+
SW1/up
SW2Down
L/OUT
N
L
Dimming luminaire(DSI or DALI)
Dimming Ballast
Luminaire (non-dimming)
CDD 22020 / CDD 25020 – Dual Circuit
1 2 3 4 5 6 7 8 13129 1110
L
N
S3
S4
S1
S2
OFF
1 2 3 4 5 6 7 8 9 141312
L
N
1110
S3
S4
S1
S2
OFF
CSC 0404 CSC 2202
CSC 0404 CSC 2202
Overridepush down before use
Circuit protection (if required)Live
Neutral
Loads
LLiveout
On
Off
WIPRO LIGHTING ADVANTAGE
Innovative lighting solutions for Modern Workspaces through:
! Energy saving solutions with latest international technologies
! Capability to service multi-locational accounts
! Service commitment : 23 branches and over 150 dedicated stockists
! Ease of contact through helpline (toll-free) & website
! Trustworthiness and Reliability of Wipro
RELATED PRODUCTS
Business Office:Wipro Lighting
th5 Floor, Godrej Eternia - C, Old Pune-Mumbai Road, Shivajinagar, Pune - 411 005Tel. : 020-66098700 Fax : 020-66098777E-mail : [email protected]
Registered Office:Wipro LimitedDoddakannelli, Sarjapur Road, Bangalore - 560035Tel. : 080-28440011 Fax : 080-28440057
For more information contact us at:
www.wiprolighting.com
studio
mar
s /
1k
/ 1
2 0
9/
LC1
Innovation and Improvement are a way of life at Wipro. All rights reserved. Reproduction of this data in part or in whole without permission is prohibited.
Care has been taken to ensure that the information content within is correct. We reserve the right to modify the product without prior intimation.
NEW DELHI Tel: 011 - 41708122-29
KOLKATA Tel: 033 - 22829268
MUMBAI (VIKHROLI) Tel: 022 - 67213755
MUMBAI (ANDHERI) Tel: 022 - 66941056-8
PUNE Tel: 020 - 25510583 / 25535081
HYDERABAD Tel: 040 - 27176082/ 27178906
BANGALORE Tel: 080 - 41503260 to 41503268
CHENNAI Tel: 044 - 32518016
CHANDIGARH Tel: 0172 - 5018734/2660714
LUDHIANA Tel: 9216750562
WESTERN UP & Tel: 9216750562
UTTARAKHAND
LUCKNOW Tel: 0522 - 2434352
JAIPUR Tel: 0141 - 2280014 / 2280289
AHMEDABAD Tel: 079 - 40073546
BARODA Tel: 0265 - 2395830/35/36/41/45
VISHAKHAPATNAM Tel: 0891 - 2720030
NAGPUR Tel: 0712 - 2233562
RAIPUR Tel: 0771 - 6467068 / 2244631
INDORE Tel: 0731 - 4023486
COIMBATORE Tel: 0422 - 2477841 / 2478751
COCHIN Tel: 9895708464
MADURAI (TAMILNADU)Tel: 9364184885
HUBLI (KARNATAKA) Tel: 0836-2236902 / 9741500081
GOA Tel: 0832- 6650404
Force Green is a commitment to support Green Buildings by providing high performance energy efficient lighting solutions through a dedicated team of experts.
Winning Solutions from Wipro Lighting through Force Green:
=Accredited with providing lighting solutions to maximum number of Green Buildings in India (including the first Platinum rated Green Building in India)
=Comprehensive range of energy-efficient luminaires, including LED-based solutions
=Dedicated team of experts, experienced in creating luminaires and lighting designs to comply with all Green standards and attain maximum credit points
=Capability to integrate Lighting and Lighting Management Systems to create energy efficient solutions
is a step forward for Wipro Lighting’s FORCE GREEN initiative. eTM
an eco -eye in i t iat ive of Wipro
WIPRO SECURITY BUILDING SOLUTIONS
& NORTH WESTSWITCHES
-WIPROFURNITURE
SPACIO PLAYDOWNLIGHTER
KOLORSSTRIPLIGHTS
EDGE RHYTHM